1 /* $OpenBSD: packet.c,v 1.166 2009/06/27 09:29:06 andreas Exp $ */
3 * Author: Tatu Ylonen <ylo@cs.hut.fi>
4 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
6 * This file contains code implementing the packet protocol and communication
7 * with the other side. This same code is used both on client and server side.
9 * As far as I am concerned, the code I have written for this software
10 * can be used freely for any purpose. Any derived versions of this
11 * software must be clearly marked as such, and if the derived work is
12 * incompatible with the protocol description in the RFC file, it must be
13 * called by a name other than "ssh" or "Secure Shell".
16 * SSH2 packet format added by Markus Friedl.
17 * Copyright (c) 2000, 2001 Markus Friedl. All rights reserved.
19 * Redistribution and use in source and binary forms, with or without
20 * modification, are permitted provided that the following conditions
22 * 1. Redistributions of source code must retain the above copyright
23 * notice, this list of conditions and the following disclaimer.
24 * 2. Redistributions in binary form must reproduce the above copyright
25 * notice, this list of conditions and the following disclaimer in the
26 * documentation and/or other materials provided with the distribution.
28 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
29 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
30 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
31 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
32 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
33 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
37 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42 #include <sys/types.h>
43 #include "openbsd-compat/sys-queue.h"
44 #include <sys/param.h>
45 #include <sys/socket.h>
46 #ifdef HAVE_SYS_TIME_H
47 # include <sys/time.h>
50 #include <netinet/in.h>
51 #include <netinet/ip.h>
52 #include <arpa/inet.h>
88 #define PACKET_MAX_SIZE (256 * 1024)
98 TAILQ_ENTRY(packet
) next
;
103 struct session_state
{
105 * This variable contains the file descriptors used for
106 * communicating with the other side. connection_in is used for
107 * reading; connection_out for writing. These can be the same
108 * descriptor, in which case it is assumed to be a socket.
113 /* Protocol flags for the remote side. */
114 u_int remote_protocol_flags
;
116 /* Encryption context for receiving data. Only used for decryption. */
117 CipherContext receive_context
;
119 /* Encryption context for sending data. Only used for encryption. */
120 CipherContext send_context
;
122 /* Buffer for raw input data from the socket. */
125 /* Buffer for raw output data going to the socket. */
128 /* Buffer for the partial outgoing packet being constructed. */
129 Buffer outgoing_packet
;
131 /* Buffer for the incoming packet currently being processed. */
132 Buffer incoming_packet
;
134 /* Scratch buffer for packet compression/decompression. */
135 Buffer compression_buffer
;
136 int compression_buffer_ready
;
139 * Flag indicating whether packet compression/decompression is
142 int packet_compression
;
144 /* default maximum packet size */
145 u_int max_packet_size
;
147 /* Flag indicating whether this module has been initialized. */
150 /* Set to true if the connection is interactive. */
151 int interactive_mode
;
153 /* Set to true if we are the server side. */
156 /* Set to true if we are authenticated. */
157 int after_authentication
;
159 int keep_alive_timeouts
;
161 /* The maximum time that we will wait to send or receive a packet */
162 int packet_timeout_ms
;
164 /* Session key information for Encryption and MAC */
165 Newkeys
*newkeys
[MODE_MAX
];
166 struct packet_state p_read
, p_send
;
168 u_int64_t max_blocks_in
, max_blocks_out
;
169 u_int32_t rekey_limit
;
171 /* Session key for protocol v1 */
172 u_char ssh1_key
[SSH_SESSION_KEY_LENGTH
];
175 /* roundup current message to extra_pad bytes */
178 /* XXX discard incoming data after MAC error */
179 u_int packet_discard
;
180 Mac
*packet_discard_mac
;
182 /* Used in packet_read_poll2() */
185 /* Used in packet_send2 */
188 /* Used in packet_set_interactive */
189 int set_interactive_called
;
191 /* Used in packet_set_maxsize */
192 int set_maxsize_called
;
194 TAILQ_HEAD(, packet
) outgoing
;
197 static struct session_state
*active_state
, *backup_state
;
199 static struct session_state
*
200 alloc_session_state(void)
202 struct session_state
*s
= xcalloc(1, sizeof(*s
));
204 s
->connection_in
= -1;
205 s
->connection_out
= -1;
206 s
->max_packet_size
= 32768;
207 s
->packet_timeout_ms
= -1;
212 * Sets the descriptors used for communication. Disables encryption until
213 * packet_set_encryption_key is called.
216 packet_set_connection(int fd_in
, int fd_out
)
218 Cipher
*none
= cipher_by_name("none");
221 fatal("packet_set_connection: cannot load cipher 'none'");
222 if (active_state
== NULL
)
223 active_state
= alloc_session_state();
224 active_state
->connection_in
= fd_in
;
225 active_state
->connection_out
= fd_out
;
226 cipher_init(&active_state
->send_context
, none
, (const u_char
*)"",
227 0, NULL
, 0, CIPHER_ENCRYPT
);
228 cipher_init(&active_state
->receive_context
, none
, (const u_char
*)"",
229 0, NULL
, 0, CIPHER_DECRYPT
);
230 active_state
->newkeys
[MODE_IN
] = active_state
->newkeys
[MODE_OUT
] = NULL
;
231 if (!active_state
->initialized
) {
232 active_state
->initialized
= 1;
233 buffer_init(&active_state
->input
);
234 buffer_init(&active_state
->output
);
235 buffer_init(&active_state
->outgoing_packet
);
236 buffer_init(&active_state
->incoming_packet
);
237 TAILQ_INIT(&active_state
->outgoing
);
238 active_state
->p_send
.packets
= active_state
->p_read
.packets
= 0;
243 packet_set_timeout(int timeout
, int count
)
245 if (timeout
== 0 || count
== 0) {
246 active_state
->packet_timeout_ms
= -1;
249 if ((INT_MAX
/ 1000) / count
< timeout
)
250 active_state
->packet_timeout_ms
= INT_MAX
;
252 active_state
->packet_timeout_ms
= timeout
* count
* 1000;
256 packet_stop_discard(void)
258 if (active_state
->packet_discard_mac
) {
261 memset(buf
, 'a', sizeof(buf
));
262 while (buffer_len(&active_state
->incoming_packet
) <
264 buffer_append(&active_state
->incoming_packet
, buf
,
266 (void) mac_compute(active_state
->packet_discard_mac
,
267 active_state
->p_read
.seqnr
,
268 buffer_ptr(&active_state
->incoming_packet
),
271 logit("Finished discarding for %.200s", get_remote_ipaddr());
276 packet_start_discard(Enc
*enc
, Mac
*mac
, u_int packet_length
, u_int discard
)
278 if (enc
== NULL
|| !cipher_is_cbc(enc
->cipher
))
279 packet_disconnect("Packet corrupt");
280 if (packet_length
!= PACKET_MAX_SIZE
&& mac
&& mac
->enabled
)
281 active_state
->packet_discard_mac
= mac
;
282 if (buffer_len(&active_state
->input
) >= discard
)
283 packet_stop_discard();
284 active_state
->packet_discard
= discard
-
285 buffer_len(&active_state
->input
);
288 /* Returns 1 if remote host is connected via socket, 0 if not. */
291 packet_connection_is_on_socket(void)
293 struct sockaddr_storage from
, to
;
294 socklen_t fromlen
, tolen
;
296 /* filedescriptors in and out are the same, so it's a socket */
297 if (active_state
->connection_in
== active_state
->connection_out
)
299 fromlen
= sizeof(from
);
300 memset(&from
, 0, sizeof(from
));
301 if (getpeername(active_state
->connection_in
, (struct sockaddr
*)&from
,
305 memset(&to
, 0, sizeof(to
));
306 if (getpeername(active_state
->connection_out
, (struct sockaddr
*)&to
,
309 if (fromlen
!= tolen
|| memcmp(&from
, &to
, fromlen
) != 0)
311 if (from
.ss_family
!= AF_INET
&& from
.ss_family
!= AF_INET6
)
317 * Exports an IV from the CipherContext required to export the key
318 * state back from the unprivileged child to the privileged parent
323 packet_get_keyiv(int mode
, u_char
*iv
, u_int len
)
327 if (mode
== MODE_OUT
)
328 cc
= &active_state
->send_context
;
330 cc
= &active_state
->receive_context
;
332 cipher_get_keyiv(cc
, iv
, len
);
336 packet_get_keycontext(int mode
, u_char
*dat
)
340 if (mode
== MODE_OUT
)
341 cc
= &active_state
->send_context
;
343 cc
= &active_state
->receive_context
;
345 return (cipher_get_keycontext(cc
, dat
));
349 packet_set_keycontext(int mode
, u_char
*dat
)
353 if (mode
== MODE_OUT
)
354 cc
= &active_state
->send_context
;
356 cc
= &active_state
->receive_context
;
358 cipher_set_keycontext(cc
, dat
);
362 packet_get_keyiv_len(int mode
)
366 if (mode
== MODE_OUT
)
367 cc
= &active_state
->send_context
;
369 cc
= &active_state
->receive_context
;
371 return (cipher_get_keyiv_len(cc
));
375 packet_set_iv(int mode
, u_char
*dat
)
379 if (mode
== MODE_OUT
)
380 cc
= &active_state
->send_context
;
382 cc
= &active_state
->receive_context
;
384 cipher_set_keyiv(cc
, dat
);
388 packet_get_ssh1_cipher(void)
390 return (cipher_get_number(active_state
->receive_context
.cipher
));
394 packet_get_state(int mode
, u_int32_t
*seqnr
, u_int64_t
*blocks
, u_int32_t
*packets
,
397 struct packet_state
*state
;
399 state
= (mode
== MODE_IN
) ?
400 &active_state
->p_read
: &active_state
->p_send
;
402 *seqnr
= state
->seqnr
;
404 *blocks
= state
->blocks
;
406 *packets
= state
->packets
;
408 *bytes
= state
->bytes
;
412 packet_set_state(int mode
, u_int32_t seqnr
, u_int64_t blocks
, u_int32_t packets
,
415 struct packet_state
*state
;
417 state
= (mode
== MODE_IN
) ?
418 &active_state
->p_read
: &active_state
->p_send
;
419 state
->seqnr
= seqnr
;
420 state
->blocks
= blocks
;
421 state
->packets
= packets
;
422 state
->bytes
= bytes
;
425 /* returns 1 if connection is via ipv4 */
428 packet_connection_is_ipv4(void)
430 struct sockaddr_storage to
;
431 socklen_t tolen
= sizeof(to
);
433 memset(&to
, 0, sizeof(to
));
434 if (getsockname(active_state
->connection_out
, (struct sockaddr
*)&to
,
437 if (to
.ss_family
== AF_INET
)
440 if (to
.ss_family
== AF_INET6
&&
441 IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6
*)&to
)->sin6_addr
))
447 /* Sets the connection into non-blocking mode. */
450 packet_set_nonblocking(void)
452 /* Set the socket into non-blocking mode. */
453 set_nonblock(active_state
->connection_in
);
455 if (active_state
->connection_out
!= active_state
->connection_in
)
456 set_nonblock(active_state
->connection_out
);
459 /* Returns the socket used for reading. */
462 packet_get_connection_in(void)
464 return active_state
->connection_in
;
467 /* Returns the descriptor used for writing. */
470 packet_get_connection_out(void)
472 return active_state
->connection_out
;
475 /* Closes the connection and clears and frees internal data structures. */
480 if (!active_state
->initialized
)
482 active_state
->initialized
= 0;
483 if (active_state
->connection_in
== active_state
->connection_out
) {
484 shutdown(active_state
->connection_out
, SHUT_RDWR
);
485 close(active_state
->connection_out
);
487 close(active_state
->connection_in
);
488 close(active_state
->connection_out
);
490 buffer_free(&active_state
->input
);
491 buffer_free(&active_state
->output
);
492 buffer_free(&active_state
->outgoing_packet
);
493 buffer_free(&active_state
->incoming_packet
);
494 if (active_state
->compression_buffer_ready
) {
495 buffer_free(&active_state
->compression_buffer
);
496 buffer_compress_uninit();
498 cipher_cleanup(&active_state
->send_context
);
499 cipher_cleanup(&active_state
->receive_context
);
502 /* Sets remote side protocol flags. */
505 packet_set_protocol_flags(u_int protocol_flags
)
507 active_state
->remote_protocol_flags
= protocol_flags
;
510 /* Returns the remote protocol flags set earlier by the above function. */
513 packet_get_protocol_flags(void)
515 return active_state
->remote_protocol_flags
;
519 * Starts packet compression from the next packet on in both directions.
520 * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip.
524 packet_init_compression(void)
526 if (active_state
->compression_buffer_ready
== 1)
528 active_state
->compression_buffer_ready
= 1;
529 buffer_init(&active_state
->compression_buffer
);
533 packet_start_compression(int level
)
535 if (active_state
->packet_compression
&& !compat20
)
536 fatal("Compression already enabled.");
537 active_state
->packet_compression
= 1;
538 packet_init_compression();
539 buffer_compress_init_send(level
);
540 buffer_compress_init_recv();
544 * Causes any further packets to be encrypted using the given key. The same
545 * key is used for both sending and reception. However, both directions are
546 * encrypted independently of each other.
550 packet_set_encryption_key(const u_char
*key
, u_int keylen
,
553 Cipher
*cipher
= cipher_by_number(number
);
556 fatal("packet_set_encryption_key: unknown cipher number %d", number
);
558 fatal("packet_set_encryption_key: keylen too small: %d", keylen
);
559 if (keylen
> SSH_SESSION_KEY_LENGTH
)
560 fatal("packet_set_encryption_key: keylen too big: %d", keylen
);
561 memcpy(active_state
->ssh1_key
, key
, keylen
);
562 active_state
->ssh1_keylen
= keylen
;
563 cipher_init(&active_state
->send_context
, cipher
, key
, keylen
, NULL
,
565 cipher_init(&active_state
->receive_context
, cipher
, key
, keylen
, NULL
,
570 packet_get_encryption_key(u_char
*key
)
573 return (active_state
->ssh1_keylen
);
574 memcpy(key
, active_state
->ssh1_key
, active_state
->ssh1_keylen
);
575 return (active_state
->ssh1_keylen
);
578 /* Start constructing a packet to send. */
580 packet_start(u_char type
)
585 DBG(debug("packet_start[%d]", type
));
586 len
= compat20
? 6 : 9;
587 memset(buf
, 0, len
- 1);
589 buffer_clear(&active_state
->outgoing_packet
);
590 buffer_append(&active_state
->outgoing_packet
, buf
, len
);
593 /* Append payload. */
595 packet_put_char(int value
)
599 buffer_append(&active_state
->outgoing_packet
, &ch
, 1);
603 packet_put_int(u_int value
)
605 buffer_put_int(&active_state
->outgoing_packet
, value
);
609 packet_put_int64(u_int64_t value
)
611 buffer_put_int64(&active_state
->outgoing_packet
, value
);
615 packet_put_string(const void *buf
, u_int len
)
617 buffer_put_string(&active_state
->outgoing_packet
, buf
, len
);
621 packet_put_cstring(const char *str
)
623 buffer_put_cstring(&active_state
->outgoing_packet
, str
);
627 packet_put_raw(const void *buf
, u_int len
)
629 buffer_append(&active_state
->outgoing_packet
, buf
, len
);
633 packet_put_bignum(BIGNUM
* value
)
635 buffer_put_bignum(&active_state
->outgoing_packet
, value
);
639 packet_put_bignum2(BIGNUM
* value
)
641 buffer_put_bignum2(&active_state
->outgoing_packet
, value
);
645 * Finalizes and sends the packet. If the encryption key has been set,
646 * encrypts the packet before sending.
658 * If using packet compression, compress the payload of the outgoing
661 if (active_state
->packet_compression
) {
662 buffer_clear(&active_state
->compression_buffer
);
664 buffer_consume(&active_state
->outgoing_packet
, 8);
666 buffer_append(&active_state
->compression_buffer
,
667 "\0\0\0\0\0\0\0\0", 8);
668 buffer_compress(&active_state
->outgoing_packet
,
669 &active_state
->compression_buffer
);
670 buffer_clear(&active_state
->outgoing_packet
);
671 buffer_append(&active_state
->outgoing_packet
,
672 buffer_ptr(&active_state
->compression_buffer
),
673 buffer_len(&active_state
->compression_buffer
));
675 /* Compute packet length without padding (add checksum, remove padding). */
676 len
= buffer_len(&active_state
->outgoing_packet
) + 4 - 8;
678 /* Insert padding. Initialized to zero in packet_start1() */
679 padding
= 8 - len
% 8;
680 if (!active_state
->send_context
.plaintext
) {
681 cp
= buffer_ptr(&active_state
->outgoing_packet
);
682 for (i
= 0; i
< padding
; i
++) {
685 cp
[7 - i
] = rnd
& 0xff;
689 buffer_consume(&active_state
->outgoing_packet
, 8 - padding
);
691 /* Add check bytes. */
692 checksum
= ssh_crc32(buffer_ptr(&active_state
->outgoing_packet
),
693 buffer_len(&active_state
->outgoing_packet
));
694 put_u32(buf
, checksum
);
695 buffer_append(&active_state
->outgoing_packet
, buf
, 4);
698 fprintf(stderr
, "packet_send plain: ");
699 buffer_dump(&active_state
->outgoing_packet
);
702 /* Append to output. */
704 buffer_append(&active_state
->output
, buf
, 4);
705 cp
= buffer_append_space(&active_state
->output
,
706 buffer_len(&active_state
->outgoing_packet
));
707 cipher_crypt(&active_state
->send_context
, cp
,
708 buffer_ptr(&active_state
->outgoing_packet
),
709 buffer_len(&active_state
->outgoing_packet
));
712 fprintf(stderr
, "encrypted: ");
713 buffer_dump(&active_state
->output
);
715 active_state
->p_send
.packets
++;
716 active_state
->p_send
.bytes
+= len
+
717 buffer_len(&active_state
->outgoing_packet
);
718 buffer_clear(&active_state
->outgoing_packet
);
721 * Note that the packet is now only buffered in output. It won't be
722 * actually sent until packet_write_wait or packet_write_poll is
728 set_newkeys(int mode
)
734 u_int64_t
*max_blocks
;
737 debug2("set_newkeys: mode %d", mode
);
739 if (mode
== MODE_OUT
) {
740 cc
= &active_state
->send_context
;
741 crypt_type
= CIPHER_ENCRYPT
;
742 active_state
->p_send
.packets
= active_state
->p_send
.blocks
= 0;
743 max_blocks
= &active_state
->max_blocks_out
;
745 cc
= &active_state
->receive_context
;
746 crypt_type
= CIPHER_DECRYPT
;
747 active_state
->p_read
.packets
= active_state
->p_read
.blocks
= 0;
748 max_blocks
= &active_state
->max_blocks_in
;
750 if (active_state
->newkeys
[mode
] != NULL
) {
751 debug("set_newkeys: rekeying");
753 enc
= &active_state
->newkeys
[mode
]->enc
;
754 mac
= &active_state
->newkeys
[mode
]->mac
;
755 comp
= &active_state
->newkeys
[mode
]->comp
;
763 xfree(active_state
->newkeys
[mode
]);
765 active_state
->newkeys
[mode
] = kex_get_newkeys(mode
);
766 if (active_state
->newkeys
[mode
] == NULL
)
767 fatal("newkeys: no keys for mode %d", mode
);
768 enc
= &active_state
->newkeys
[mode
]->enc
;
769 mac
= &active_state
->newkeys
[mode
]->mac
;
770 comp
= &active_state
->newkeys
[mode
]->comp
;
771 if (mac_init(mac
) == 0)
773 DBG(debug("cipher_init_context: %d", mode
));
774 cipher_init(cc
, enc
->cipher
, enc
->key
, enc
->key_len
,
775 enc
->iv
, enc
->block_size
, crypt_type
);
776 /* Deleting the keys does not gain extra security */
777 /* memset(enc->iv, 0, enc->block_size);
778 memset(enc->key, 0, enc->key_len);
779 memset(mac->key, 0, mac->key_len); */
780 if ((comp
->type
== COMP_ZLIB
||
781 (comp
->type
== COMP_DELAYED
&&
782 active_state
->after_authentication
)) && comp
->enabled
== 0) {
783 packet_init_compression();
784 if (mode
== MODE_OUT
)
785 buffer_compress_init_send(6);
787 buffer_compress_init_recv();
791 * The 2^(blocksize*2) limit is too expensive for 3DES,
792 * blowfish, etc, so enforce a 1GB limit for small blocksizes.
794 if (enc
->block_size
>= 16)
795 *max_blocks
= (u_int64_t
)1 << (enc
->block_size
*2);
797 *max_blocks
= ((u_int64_t
)1 << 30) / enc
->block_size
;
798 if (active_state
->rekey_limit
)
799 *max_blocks
= MIN(*max_blocks
,
800 active_state
->rekey_limit
/ enc
->block_size
);
804 * Delayed compression for SSH2 is enabled after authentication:
805 * This happens on the server side after a SSH2_MSG_USERAUTH_SUCCESS is sent,
806 * and on the client side after a SSH2_MSG_USERAUTH_SUCCESS is received.
809 packet_enable_delayed_compress(void)
815 * Remember that we are past the authentication step, so rekeying
816 * with COMP_DELAYED will turn on compression immediately.
818 active_state
->after_authentication
= 1;
819 for (mode
= 0; mode
< MODE_MAX
; mode
++) {
820 /* protocol error: USERAUTH_SUCCESS received before NEWKEYS */
821 if (active_state
->newkeys
[mode
] == NULL
)
823 comp
= &active_state
->newkeys
[mode
]->comp
;
824 if (comp
&& !comp
->enabled
&& comp
->type
== COMP_DELAYED
) {
825 packet_init_compression();
826 if (mode
== MODE_OUT
)
827 buffer_compress_init_send(6);
829 buffer_compress_init_recv();
836 * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue)
839 packet_send2_wrapped(void)
841 u_char type
, *cp
, *macbuf
= NULL
;
843 u_int packet_length
= 0;
851 if (active_state
->newkeys
[MODE_OUT
] != NULL
) {
852 enc
= &active_state
->newkeys
[MODE_OUT
]->enc
;
853 mac
= &active_state
->newkeys
[MODE_OUT
]->mac
;
854 comp
= &active_state
->newkeys
[MODE_OUT
]->comp
;
856 block_size
= enc
? enc
->block_size
: 8;
858 cp
= buffer_ptr(&active_state
->outgoing_packet
);
862 fprintf(stderr
, "plain: ");
863 buffer_dump(&active_state
->outgoing_packet
);
866 if (comp
&& comp
->enabled
) {
867 len
= buffer_len(&active_state
->outgoing_packet
);
868 /* skip header, compress only payload */
869 buffer_consume(&active_state
->outgoing_packet
, 5);
870 buffer_clear(&active_state
->compression_buffer
);
871 buffer_compress(&active_state
->outgoing_packet
,
872 &active_state
->compression_buffer
);
873 buffer_clear(&active_state
->outgoing_packet
);
874 buffer_append(&active_state
->outgoing_packet
, "\0\0\0\0\0", 5);
875 buffer_append(&active_state
->outgoing_packet
,
876 buffer_ptr(&active_state
->compression_buffer
),
877 buffer_len(&active_state
->compression_buffer
));
878 DBG(debug("compression: raw %d compressed %d", len
,
879 buffer_len(&active_state
->outgoing_packet
)));
882 /* sizeof (packet_len + pad_len + payload) */
883 len
= buffer_len(&active_state
->outgoing_packet
);
886 * calc size of padding, alloc space, get random data,
887 * minimum padding is 4 bytes
889 padlen
= block_size
- (len
% block_size
);
891 padlen
+= block_size
;
892 if (active_state
->extra_pad
) {
893 /* will wrap if extra_pad+padlen > 255 */
894 active_state
->extra_pad
=
895 roundup(active_state
->extra_pad
, block_size
);
896 pad
= active_state
->extra_pad
-
897 ((len
+ padlen
) % active_state
->extra_pad
);
898 debug3("packet_send2: adding %d (len %d padlen %d extra_pad %d)",
899 pad
, len
, padlen
, active_state
->extra_pad
);
901 active_state
->extra_pad
= 0;
903 cp
= buffer_append_space(&active_state
->outgoing_packet
, padlen
);
904 if (enc
&& !active_state
->send_context
.plaintext
) {
906 for (i
= 0; i
< padlen
; i
++) {
914 memset(cp
, 0, padlen
);
916 /* packet_length includes payload, padding and padding length field */
917 packet_length
= buffer_len(&active_state
->outgoing_packet
) - 4;
918 cp
= buffer_ptr(&active_state
->outgoing_packet
);
919 put_u32(cp
, packet_length
);
921 DBG(debug("send: len %d (includes padlen %d)", packet_length
+4, padlen
));
923 /* compute MAC over seqnr and packet(length fields, payload, padding) */
924 if (mac
&& mac
->enabled
) {
925 macbuf
= mac_compute(mac
, active_state
->p_send
.seqnr
,
926 buffer_ptr(&active_state
->outgoing_packet
),
927 buffer_len(&active_state
->outgoing_packet
));
928 DBG(debug("done calc MAC out #%d", active_state
->p_send
.seqnr
));
930 /* encrypt packet and append to output buffer. */
931 cp
= buffer_append_space(&active_state
->output
,
932 buffer_len(&active_state
->outgoing_packet
));
933 cipher_crypt(&active_state
->send_context
, cp
,
934 buffer_ptr(&active_state
->outgoing_packet
),
935 buffer_len(&active_state
->outgoing_packet
));
936 /* append unencrypted MAC */
937 if (mac
&& mac
->enabled
)
938 buffer_append(&active_state
->output
, macbuf
, mac
->mac_len
);
940 fprintf(stderr
, "encrypted: ");
941 buffer_dump(&active_state
->output
);
943 /* increment sequence number for outgoing packets */
944 if (++active_state
->p_send
.seqnr
== 0)
945 logit("outgoing seqnr wraps around");
946 if (++active_state
->p_send
.packets
== 0)
947 if (!(datafellows
& SSH_BUG_NOREKEY
))
948 fatal("XXX too many packets with same key");
949 active_state
->p_send
.blocks
+= (packet_length
+ 4) / block_size
;
950 active_state
->p_send
.bytes
+= packet_length
+ 4;
951 buffer_clear(&active_state
->outgoing_packet
);
953 if (type
== SSH2_MSG_NEWKEYS
)
954 set_newkeys(MODE_OUT
);
955 else if (type
== SSH2_MSG_USERAUTH_SUCCESS
&& active_state
->server_side
)
956 packet_enable_delayed_compress();
965 cp
= buffer_ptr(&active_state
->outgoing_packet
);
968 /* during rekeying we can only send key exchange messages */
969 if (active_state
->rekeying
) {
970 if (!((type
>= SSH2_MSG_TRANSPORT_MIN
) &&
971 (type
<= SSH2_MSG_TRANSPORT_MAX
))) {
972 debug("enqueue packet: %u", type
);
973 p
= xmalloc(sizeof(*p
));
975 memcpy(&p
->payload
, &active_state
->outgoing_packet
,
977 buffer_init(&active_state
->outgoing_packet
);
978 TAILQ_INSERT_TAIL(&active_state
->outgoing
, p
, next
);
983 /* rekeying starts with sending KEXINIT */
984 if (type
== SSH2_MSG_KEXINIT
)
985 active_state
->rekeying
= 1;
987 packet_send2_wrapped();
989 /* after a NEWKEYS message we can send the complete queue */
990 if (type
== SSH2_MSG_NEWKEYS
) {
991 active_state
->rekeying
= 0;
992 while ((p
= TAILQ_FIRST(&active_state
->outgoing
))) {
994 debug("dequeue packet: %u", type
);
995 buffer_free(&active_state
->outgoing_packet
);
996 memcpy(&active_state
->outgoing_packet
, &p
->payload
,
998 TAILQ_REMOVE(&active_state
->outgoing
, p
, next
);
1000 packet_send2_wrapped();
1012 DBG(debug("packet_send done"));
1016 * Waits until a packet has been received, and returns its type. Note that
1017 * no other data is processed until this returns, so this function should not
1018 * be used during the interactive session.
1022 packet_read_seqnr(u_int32_t
*seqnr_p
)
1024 int type
, len
, ret
, ms_remain
, cont
;
1027 struct timeval timeout
, start
, *timeoutp
= NULL
;
1029 DBG(debug("packet_read()"));
1031 setp
= (fd_set
*)xcalloc(howmany(active_state
->connection_in
+ 1,
1032 NFDBITS
), sizeof(fd_mask
));
1034 /* Since we are blocking, ensure that all written packets have been sent. */
1035 packet_write_wait();
1037 /* Stay in the loop until we have received a complete packet. */
1039 /* Try to read a packet from the buffer. */
1040 type
= packet_read_poll_seqnr(seqnr_p
);
1042 type
== SSH_SMSG_SUCCESS
1043 || type
== SSH_SMSG_FAILURE
1044 || type
== SSH_CMSG_EOF
1045 || type
== SSH_CMSG_EXIT_CONFIRMATION
))
1047 /* If we got a packet, return it. */
1048 if (type
!= SSH_MSG_NONE
) {
1053 * Otherwise, wait for some data to arrive, add it to the
1054 * buffer, and try again.
1056 memset(setp
, 0, howmany(active_state
->connection_in
+ 1,
1057 NFDBITS
) * sizeof(fd_mask
));
1058 FD_SET(active_state
->connection_in
, setp
);
1060 if (active_state
->packet_timeout_ms
> 0) {
1061 ms_remain
= active_state
->packet_timeout_ms
;
1062 timeoutp
= &timeout
;
1064 /* Wait for some data to arrive. */
1066 if (active_state
->packet_timeout_ms
!= -1) {
1067 ms_to_timeval(&timeout
, ms_remain
);
1068 gettimeofday(&start
, NULL
);
1070 if ((ret
= select(active_state
->connection_in
+ 1, setp
,
1071 NULL
, NULL
, timeoutp
)) >= 0)
1073 if (errno
!= EAGAIN
&& errno
!= EINTR
&&
1074 errno
!= EWOULDBLOCK
)
1076 if (active_state
->packet_timeout_ms
== -1)
1078 ms_subtract_diff(&start
, &ms_remain
);
1079 if (ms_remain
<= 0) {
1085 logit("Connection to %.200s timed out while "
1086 "waiting to read", get_remote_ipaddr());
1089 /* Read data from the socket. */
1092 len
= roaming_read(active_state
->connection_in
, buf
,
1093 sizeof(buf
), &cont
);
1094 } while (len
== 0 && cont
);
1096 logit("Connection closed by %.200s", get_remote_ipaddr());
1100 fatal("Read from socket failed: %.100s", strerror(errno
));
1101 /* Append it to the buffer. */
1102 packet_process_incoming(buf
, len
);
1110 return packet_read_seqnr(NULL
);
1114 * Waits until a packet has been received, verifies that its type matches
1115 * that given, and gives a fatal error and exits if there is a mismatch.
1119 packet_read_expect(int expected_type
)
1123 type
= packet_read();
1124 if (type
!= expected_type
)
1125 packet_disconnect("Protocol error: expected packet type %d, got %d",
1126 expected_type
, type
);
1129 /* Checks if a full packet is available in the data received so far via
1130 * packet_process_incoming. If so, reads the packet; otherwise returns
1131 * SSH_MSG_NONE. This does not wait for data from the connection.
1133 * SSH_MSG_DISCONNECT is handled specially here. Also,
1134 * SSH_MSG_IGNORE messages are skipped by this function and are never returned
1139 packet_read_poll1(void)
1141 u_int len
, padded_len
;
1143 u_int checksum
, stored_checksum
;
1145 /* Check if input size is less than minimum packet size. */
1146 if (buffer_len(&active_state
->input
) < 4 + 8)
1147 return SSH_MSG_NONE
;
1148 /* Get length of incoming packet. */
1149 cp
= buffer_ptr(&active_state
->input
);
1151 if (len
< 1 + 2 + 2 || len
> 256 * 1024)
1152 packet_disconnect("Bad packet length %u.", len
);
1153 padded_len
= (len
+ 8) & ~7;
1155 /* Check if the packet has been entirely received. */
1156 if (buffer_len(&active_state
->input
) < 4 + padded_len
)
1157 return SSH_MSG_NONE
;
1159 /* The entire packet is in buffer. */
1161 /* Consume packet length. */
1162 buffer_consume(&active_state
->input
, 4);
1165 * Cryptographic attack detector for ssh
1166 * (C)1998 CORE-SDI, Buenos Aires Argentina
1167 * Ariel Futoransky(futo@core-sdi.com)
1169 if (!active_state
->receive_context
.plaintext
) {
1170 switch (detect_attack(buffer_ptr(&active_state
->input
),
1172 case DEATTACK_DETECTED
:
1173 packet_disconnect("crc32 compensation attack: "
1174 "network attack detected");
1175 case DEATTACK_DOS_DETECTED
:
1176 packet_disconnect("deattack denial of "
1177 "service detected");
1181 /* Decrypt data to incoming_packet. */
1182 buffer_clear(&active_state
->incoming_packet
);
1183 cp
= buffer_append_space(&active_state
->incoming_packet
, padded_len
);
1184 cipher_crypt(&active_state
->receive_context
, cp
,
1185 buffer_ptr(&active_state
->input
), padded_len
);
1187 buffer_consume(&active_state
->input
, padded_len
);
1190 fprintf(stderr
, "read_poll plain: ");
1191 buffer_dump(&active_state
->incoming_packet
);
1194 /* Compute packet checksum. */
1195 checksum
= ssh_crc32(buffer_ptr(&active_state
->incoming_packet
),
1196 buffer_len(&active_state
->incoming_packet
) - 4);
1199 buffer_consume(&active_state
->incoming_packet
, 8 - len
% 8);
1201 /* Test check bytes. */
1202 if (len
!= buffer_len(&active_state
->incoming_packet
))
1203 packet_disconnect("packet_read_poll1: len %d != buffer_len %d.",
1204 len
, buffer_len(&active_state
->incoming_packet
));
1206 cp
= (u_char
*)buffer_ptr(&active_state
->incoming_packet
) + len
- 4;
1207 stored_checksum
= get_u32(cp
);
1208 if (checksum
!= stored_checksum
)
1209 packet_disconnect("Corrupted check bytes on input.");
1210 buffer_consume_end(&active_state
->incoming_packet
, 4);
1212 if (active_state
->packet_compression
) {
1213 buffer_clear(&active_state
->compression_buffer
);
1214 buffer_uncompress(&active_state
->incoming_packet
,
1215 &active_state
->compression_buffer
);
1216 buffer_clear(&active_state
->incoming_packet
);
1217 buffer_append(&active_state
->incoming_packet
,
1218 buffer_ptr(&active_state
->compression_buffer
),
1219 buffer_len(&active_state
->compression_buffer
));
1221 active_state
->p_read
.packets
++;
1222 active_state
->p_read
.bytes
+= padded_len
+ 4;
1223 type
= buffer_get_char(&active_state
->incoming_packet
);
1224 if (type
< SSH_MSG_MIN
|| type
> SSH_MSG_MAX
)
1225 packet_disconnect("Invalid ssh1 packet type: %d", type
);
1230 packet_read_poll2(u_int32_t
*seqnr_p
)
1233 u_char
*macbuf
, *cp
, type
;
1234 u_int maclen
, block_size
;
1239 if (active_state
->packet_discard
)
1240 return SSH_MSG_NONE
;
1242 if (active_state
->newkeys
[MODE_IN
] != NULL
) {
1243 enc
= &active_state
->newkeys
[MODE_IN
]->enc
;
1244 mac
= &active_state
->newkeys
[MODE_IN
]->mac
;
1245 comp
= &active_state
->newkeys
[MODE_IN
]->comp
;
1247 maclen
= mac
&& mac
->enabled
? mac
->mac_len
: 0;
1248 block_size
= enc
? enc
->block_size
: 8;
1250 if (active_state
->packlen
== 0) {
1252 * check if input size is less than the cipher block size,
1253 * decrypt first block and extract length of incoming packet
1255 if (buffer_len(&active_state
->input
) < block_size
)
1256 return SSH_MSG_NONE
;
1257 buffer_clear(&active_state
->incoming_packet
);
1258 cp
= buffer_append_space(&active_state
->incoming_packet
,
1260 cipher_crypt(&active_state
->receive_context
, cp
,
1261 buffer_ptr(&active_state
->input
), block_size
);
1262 cp
= buffer_ptr(&active_state
->incoming_packet
);
1263 active_state
->packlen
= get_u32(cp
);
1264 if (active_state
->packlen
< 1 + 4 ||
1265 active_state
->packlen
> PACKET_MAX_SIZE
) {
1267 buffer_dump(&active_state
->incoming_packet
);
1269 logit("Bad packet length %u.", active_state
->packlen
);
1270 packet_start_discard(enc
, mac
, active_state
->packlen
,
1272 return SSH_MSG_NONE
;
1274 DBG(debug("input: packet len %u", active_state
->packlen
+4));
1275 buffer_consume(&active_state
->input
, block_size
);
1277 /* we have a partial packet of block_size bytes */
1278 need
= 4 + active_state
->packlen
- block_size
;
1279 DBG(debug("partial packet %d, need %d, maclen %d", block_size
,
1281 if (need
% block_size
!= 0) {
1282 logit("padding error: need %d block %d mod %d",
1283 need
, block_size
, need
% block_size
);
1284 packet_start_discard(enc
, mac
, active_state
->packlen
,
1285 PACKET_MAX_SIZE
- block_size
);
1286 return SSH_MSG_NONE
;
1289 * check if the entire packet has been received and
1290 * decrypt into incoming_packet
1292 if (buffer_len(&active_state
->input
) < need
+ maclen
)
1293 return SSH_MSG_NONE
;
1295 fprintf(stderr
, "read_poll enc/full: ");
1296 buffer_dump(&active_state
->input
);
1298 cp
= buffer_append_space(&active_state
->incoming_packet
, need
);
1299 cipher_crypt(&active_state
->receive_context
, cp
,
1300 buffer_ptr(&active_state
->input
), need
);
1301 buffer_consume(&active_state
->input
, need
);
1303 * compute MAC over seqnr and packet,
1304 * increment sequence number for incoming packet
1306 if (mac
&& mac
->enabled
) {
1307 macbuf
= mac_compute(mac
, active_state
->p_read
.seqnr
,
1308 buffer_ptr(&active_state
->incoming_packet
),
1309 buffer_len(&active_state
->incoming_packet
));
1310 if (memcmp(macbuf
, buffer_ptr(&active_state
->input
),
1311 mac
->mac_len
) != 0) {
1312 logit("Corrupted MAC on input.");
1313 if (need
> PACKET_MAX_SIZE
)
1314 fatal("internal error need %d", need
);
1315 packet_start_discard(enc
, mac
, active_state
->packlen
,
1316 PACKET_MAX_SIZE
- need
);
1317 return SSH_MSG_NONE
;
1320 DBG(debug("MAC #%d ok", active_state
->p_read
.seqnr
));
1321 buffer_consume(&active_state
->input
, mac
->mac_len
);
1323 /* XXX now it's safe to use fatal/packet_disconnect */
1324 if (seqnr_p
!= NULL
)
1325 *seqnr_p
= active_state
->p_read
.seqnr
;
1326 if (++active_state
->p_read
.seqnr
== 0)
1327 logit("incoming seqnr wraps around");
1328 if (++active_state
->p_read
.packets
== 0)
1329 if (!(datafellows
& SSH_BUG_NOREKEY
))
1330 fatal("XXX too many packets with same key");
1331 active_state
->p_read
.blocks
+= (active_state
->packlen
+ 4) / block_size
;
1332 active_state
->p_read
.bytes
+= active_state
->packlen
+ 4;
1335 cp
= buffer_ptr(&active_state
->incoming_packet
);
1337 DBG(debug("input: padlen %d", padlen
));
1339 packet_disconnect("Corrupted padlen %d on input.", padlen
);
1341 /* skip packet size + padlen, discard padding */
1342 buffer_consume(&active_state
->incoming_packet
, 4 + 1);
1343 buffer_consume_end(&active_state
->incoming_packet
, padlen
);
1345 DBG(debug("input: len before de-compress %d",
1346 buffer_len(&active_state
->incoming_packet
)));
1347 if (comp
&& comp
->enabled
) {
1348 buffer_clear(&active_state
->compression_buffer
);
1349 buffer_uncompress(&active_state
->incoming_packet
,
1350 &active_state
->compression_buffer
);
1351 buffer_clear(&active_state
->incoming_packet
);
1352 buffer_append(&active_state
->incoming_packet
,
1353 buffer_ptr(&active_state
->compression_buffer
),
1354 buffer_len(&active_state
->compression_buffer
));
1355 DBG(debug("input: len after de-compress %d",
1356 buffer_len(&active_state
->incoming_packet
)));
1359 * get packet type, implies consume.
1360 * return length of payload (without type field)
1362 type
= buffer_get_char(&active_state
->incoming_packet
);
1363 if (type
< SSH2_MSG_MIN
|| type
>= SSH2_MSG_LOCAL_MIN
)
1364 packet_disconnect("Invalid ssh2 packet type: %d", type
);
1365 if (type
== SSH2_MSG_NEWKEYS
)
1366 set_newkeys(MODE_IN
);
1367 else if (type
== SSH2_MSG_USERAUTH_SUCCESS
&&
1368 !active_state
->server_side
)
1369 packet_enable_delayed_compress();
1371 fprintf(stderr
, "read/plain[%d]:\r\n", type
);
1372 buffer_dump(&active_state
->incoming_packet
);
1374 /* reset for next packet */
1375 active_state
->packlen
= 0;
1380 packet_read_poll_seqnr(u_int32_t
*seqnr_p
)
1382 u_int reason
, seqnr
;
1388 type
= packet_read_poll2(seqnr_p
);
1390 active_state
->keep_alive_timeouts
= 0;
1391 DBG(debug("received packet type %d", type
));
1394 case SSH2_MSG_IGNORE
:
1395 debug3("Received SSH2_MSG_IGNORE");
1397 case SSH2_MSG_DEBUG
:
1399 msg
= packet_get_string(NULL
);
1400 debug("Remote: %.900s", msg
);
1402 msg
= packet_get_string(NULL
);
1405 case SSH2_MSG_DISCONNECT
:
1406 reason
= packet_get_int();
1407 msg
= packet_get_string(NULL
);
1408 logit("Received disconnect from %s: %u: %.400s",
1409 get_remote_ipaddr(), reason
, msg
);
1413 case SSH2_MSG_UNIMPLEMENTED
:
1414 seqnr
= packet_get_int();
1415 debug("Received SSH2_MSG_UNIMPLEMENTED for %u",
1422 type
= packet_read_poll1();
1424 case SSH_MSG_IGNORE
:
1427 msg
= packet_get_string(NULL
);
1428 debug("Remote: %.900s", msg
);
1431 case SSH_MSG_DISCONNECT
:
1432 msg
= packet_get_string(NULL
);
1433 logit("Received disconnect from %s: %.400s",
1434 get_remote_ipaddr(), msg
);
1439 DBG(debug("received packet type %d", type
));
1447 packet_read_poll(void)
1449 return packet_read_poll_seqnr(NULL
);
1453 * Buffers the given amount of input characters. This is intended to be used
1454 * together with packet_read_poll.
1458 packet_process_incoming(const char *buf
, u_int len
)
1460 if (active_state
->packet_discard
) {
1461 active_state
->keep_alive_timeouts
= 0; /* ?? */
1462 if (len
>= active_state
->packet_discard
)
1463 packet_stop_discard();
1464 active_state
->packet_discard
-= len
;
1467 buffer_append(&active_state
->input
, buf
, len
);
1470 /* Returns a character from the packet. */
1473 packet_get_char(void)
1477 buffer_get(&active_state
->incoming_packet
, &ch
, 1);
1481 /* Returns an integer from the packet data. */
1484 packet_get_int(void)
1486 return buffer_get_int(&active_state
->incoming_packet
);
1489 /* Returns an 64 bit integer from the packet data. */
1492 packet_get_int64(void)
1494 return buffer_get_int64(&active_state
->incoming_packet
);
1498 * Returns an arbitrary precision integer from the packet data. The integer
1499 * must have been initialized before this call.
1503 packet_get_bignum(BIGNUM
* value
)
1505 buffer_get_bignum(&active_state
->incoming_packet
, value
);
1509 packet_get_bignum2(BIGNUM
* value
)
1511 buffer_get_bignum2(&active_state
->incoming_packet
, value
);
1515 packet_get_raw(u_int
*length_ptr
)
1517 u_int bytes
= buffer_len(&active_state
->incoming_packet
);
1519 if (length_ptr
!= NULL
)
1520 *length_ptr
= bytes
;
1521 return buffer_ptr(&active_state
->incoming_packet
);
1525 packet_remaining(void)
1527 return buffer_len(&active_state
->incoming_packet
);
1531 * Returns a string from the packet data. The string is allocated using
1532 * xmalloc; it is the responsibility of the calling program to free it when
1533 * no longer needed. The length_ptr argument may be NULL, or point to an
1534 * integer into which the length of the string is stored.
1538 packet_get_string(u_int
*length_ptr
)
1540 return buffer_get_string(&active_state
->incoming_packet
, length_ptr
);
1544 packet_get_string_ptr(u_int
*length_ptr
)
1546 return buffer_get_string_ptr(&active_state
->incoming_packet
, length_ptr
);
1550 * Sends a diagnostic message from the server to the client. This message
1551 * can be sent at any time (but not while constructing another message). The
1552 * message is printed immediately, but only if the client is being executed
1553 * in verbose mode. These messages are primarily intended to ease debugging
1554 * authentication problems. The length of the formatted message must not
1555 * exceed 1024 bytes. This will automatically call packet_write_wait.
1559 packet_send_debug(const char *fmt
,...)
1564 if (compat20
&& (datafellows
& SSH_BUG_DEBUG
))
1567 va_start(args
, fmt
);
1568 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
1572 packet_start(SSH2_MSG_DEBUG
);
1573 packet_put_char(0); /* bool: always display */
1574 packet_put_cstring(buf
);
1575 packet_put_cstring("");
1577 packet_start(SSH_MSG_DEBUG
);
1578 packet_put_cstring(buf
);
1581 packet_write_wait();
1585 * Logs the error plus constructs and sends a disconnect packet, closes the
1586 * connection, and exits. This function never returns. The error message
1587 * should not contain a newline. The length of the formatted message must
1588 * not exceed 1024 bytes.
1592 packet_disconnect(const char *fmt
,...)
1596 static int disconnecting
= 0;
1598 if (disconnecting
) /* Guard against recursive invocations. */
1599 fatal("packet_disconnect called recursively.");
1603 * Format the message. Note that the caller must make sure the
1604 * message is of limited size.
1606 va_start(args
, fmt
);
1607 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
1610 /* Display the error locally */
1611 logit("Disconnecting: %.100s", buf
);
1613 /* Send the disconnect message to the other side, and wait for it to get sent. */
1615 packet_start(SSH2_MSG_DISCONNECT
);
1616 packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR
);
1617 packet_put_cstring(buf
);
1618 packet_put_cstring("");
1620 packet_start(SSH_MSG_DISCONNECT
);
1621 packet_put_cstring(buf
);
1624 packet_write_wait();
1626 /* Stop listening for connections. */
1627 channel_close_all();
1629 /* Close the connection. */
1634 /* Checks if there is any buffered output, and tries to write some of the output. */
1637 packet_write_poll(void)
1639 int len
= buffer_len(&active_state
->output
);
1644 len
= roaming_write(active_state
->connection_out
,
1645 buffer_ptr(&active_state
->output
), len
, &cont
);
1647 if (errno
== EINTR
|| errno
== EAGAIN
||
1648 errno
== EWOULDBLOCK
)
1650 fatal("Write failed: %.100s", strerror(errno
));
1652 if (len
== 0 && !cont
)
1653 fatal("Write connection closed");
1654 buffer_consume(&active_state
->output
, len
);
1659 * Calls packet_write_poll repeatedly until all pending output data has been
1664 packet_write_wait(void)
1668 struct timeval start
, timeout
, *timeoutp
= NULL
;
1670 setp
= (fd_set
*)xcalloc(howmany(active_state
->connection_out
+ 1,
1671 NFDBITS
), sizeof(fd_mask
));
1672 packet_write_poll();
1673 while (packet_have_data_to_write()) {
1674 memset(setp
, 0, howmany(active_state
->connection_out
+ 1,
1675 NFDBITS
) * sizeof(fd_mask
));
1676 FD_SET(active_state
->connection_out
, setp
);
1678 if (active_state
->packet_timeout_ms
> 0) {
1679 ms_remain
= active_state
->packet_timeout_ms
;
1680 timeoutp
= &timeout
;
1683 if (active_state
->packet_timeout_ms
!= -1) {
1684 ms_to_timeval(&timeout
, ms_remain
);
1685 gettimeofday(&start
, NULL
);
1687 if ((ret
= select(active_state
->connection_out
+ 1,
1688 NULL
, setp
, NULL
, timeoutp
)) >= 0)
1690 if (errno
!= EAGAIN
&& errno
!= EINTR
&&
1691 errno
!= EWOULDBLOCK
)
1693 if (active_state
->packet_timeout_ms
== -1)
1695 ms_subtract_diff(&start
, &ms_remain
);
1696 if (ms_remain
<= 0) {
1702 logit("Connection to %.200s timed out while "
1703 "waiting to write", get_remote_ipaddr());
1706 packet_write_poll();
1711 /* Returns true if there is buffered data to write to the connection. */
1714 packet_have_data_to_write(void)
1716 return buffer_len(&active_state
->output
) != 0;
1719 /* Returns true if there is not too much data to write to the connection. */
1722 packet_not_very_much_data_to_write(void)
1724 if (active_state
->interactive_mode
)
1725 return buffer_len(&active_state
->output
) < 16384;
1727 return buffer_len(&active_state
->output
) < 128 * 1024;
1731 packet_set_tos(int interactive
)
1733 #if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
1734 int tos
= interactive
? IPTOS_LOWDELAY
: IPTOS_THROUGHPUT
;
1736 if (!packet_connection_is_on_socket() ||
1737 !packet_connection_is_ipv4())
1739 if (setsockopt(active_state
->connection_in
, IPPROTO_IP
, IP_TOS
, &tos
,
1741 error("setsockopt IP_TOS %d: %.100s:",
1742 tos
, strerror(errno
));
1746 /* Informs that the current session is interactive. Sets IP flags for that. */
1749 packet_set_interactive(int interactive
)
1751 if (active_state
->set_interactive_called
)
1753 active_state
->set_interactive_called
= 1;
1755 /* Record that we are in interactive mode. */
1756 active_state
->interactive_mode
= interactive
;
1758 /* Only set socket options if using a socket. */
1759 if (!packet_connection_is_on_socket())
1761 set_nodelay(active_state
->connection_in
);
1762 packet_set_tos(interactive
);
1765 /* Returns true if the current connection is interactive. */
1768 packet_is_interactive(void)
1770 return active_state
->interactive_mode
;
1774 packet_set_maxsize(u_int s
)
1776 if (active_state
->set_maxsize_called
) {
1777 logit("packet_set_maxsize: called twice: old %d new %d",
1778 active_state
->max_packet_size
, s
);
1781 if (s
< 4 * 1024 || s
> 1024 * 1024) {
1782 logit("packet_set_maxsize: bad size %d", s
);
1785 active_state
->set_maxsize_called
= 1;
1786 debug("packet_set_maxsize: setting to %d", s
);
1787 active_state
->max_packet_size
= s
;
1792 packet_inc_alive_timeouts(void)
1794 return ++active_state
->keep_alive_timeouts
;
1798 packet_set_alive_timeouts(int ka
)
1800 active_state
->keep_alive_timeouts
= ka
;
1804 packet_get_maxsize(void)
1806 return active_state
->max_packet_size
;
1809 /* roundup current message to pad bytes */
1811 packet_add_padding(u_char pad
)
1813 active_state
->extra_pad
= pad
;
1817 * 9.2. Ignored Data Message
1819 * byte SSH_MSG_IGNORE
1822 * All implementations MUST understand (and ignore) this message at any
1823 * time (after receiving the protocol version). No implementation is
1824 * required to send them. This message can be used as an additional
1825 * protection measure against advanced traffic analysis techniques.
1828 packet_send_ignore(int nbytes
)
1833 packet_start(compat20
? SSH2_MSG_IGNORE
: SSH_MSG_IGNORE
);
1834 packet_put_int(nbytes
);
1835 for (i
= 0; i
< nbytes
; i
++) {
1838 packet_put_char((u_char
)rnd
& 0xff);
1843 #define MAX_PACKETS (1U<<31)
1845 packet_need_rekeying(void)
1847 if (datafellows
& SSH_BUG_NOREKEY
)
1850 (active_state
->p_send
.packets
> MAX_PACKETS
) ||
1851 (active_state
->p_read
.packets
> MAX_PACKETS
) ||
1852 (active_state
->max_blocks_out
&&
1853 (active_state
->p_send
.blocks
> active_state
->max_blocks_out
)) ||
1854 (active_state
->max_blocks_in
&&
1855 (active_state
->p_read
.blocks
> active_state
->max_blocks_in
));
1859 packet_set_rekey_limit(u_int32_t bytes
)
1861 active_state
->rekey_limit
= bytes
;
1865 packet_set_server(void)
1867 active_state
->server_side
= 1;
1871 packet_set_authenticated(void)
1873 active_state
->after_authentication
= 1;
1877 packet_get_input(void)
1879 return (void *)&active_state
->input
;
1883 packet_get_output(void)
1885 return (void *)&active_state
->output
;
1889 packet_get_newkeys(int mode
)
1891 return (void *)active_state
->newkeys
[mode
];
1895 * Save the state for the real connection, and use a separate state when
1896 * resuming a suspended connection.
1899 packet_backup_state(void)
1901 struct session_state
*tmp
;
1903 close(active_state
->connection_in
);
1904 active_state
->connection_in
= -1;
1905 close(active_state
->connection_out
);
1906 active_state
->connection_out
= -1;
1910 tmp
= alloc_session_state();
1911 backup_state
= active_state
;
1916 * Swap in the old state when resuming a connecion.
1919 packet_restore_state(void)
1921 struct session_state
*tmp
;
1926 backup_state
= active_state
;
1928 active_state
->connection_in
= backup_state
->connection_in
;
1929 backup_state
->connection_in
= -1;
1930 active_state
->connection_out
= backup_state
->connection_out
;
1931 backup_state
->connection_out
= -1;
1932 len
= buffer_len(&backup_state
->input
);
1934 buf
= buffer_ptr(&backup_state
->input
);
1935 buffer_append(&active_state
->input
, buf
, len
);
1936 buffer_clear(&backup_state
->input
);
1937 add_recv_bytes(len
);