1 /* $OpenBSD: channels.c,v 1.296 2009/05/25 06:48:00 andreas Exp $ */
3 * Author: Tatu Ylonen <ylo@cs.hut.fi>
4 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
6 * This file contains functions for generic socket connection forwarding.
7 * There is also code for initiating connection forwarding for X11 connections,
8 * arbitrary tcp/ip connections, and the authentication agent connection.
10 * As far as I am concerned, the code I have written for this software
11 * can be used freely for any purpose. Any derived versions of this
12 * software must be clearly marked as such, and if the derived work is
13 * incompatible with the protocol description in the RFC file, it must be
14 * called by a name other than "ssh" or "Secure Shell".
16 * SSH2 support added by Markus Friedl.
17 * Copyright (c) 1999, 2000, 2001, 2002 Markus Friedl. All rights reserved.
18 * Copyright (c) 1999 Dug Song. All rights reserved.
19 * Copyright (c) 1999 Theo de Raadt. All rights reserved.
21 * Redistribution and use in source and binary forms, with or without
22 * modification, are permitted provided that the following conditions
24 * 1. Redistributions of source code must retain the above copyright
25 * notice, this list of conditions and the following disclaimer.
26 * 2. Redistributions in binary form must reproduce the above copyright
27 * notice, this list of conditions and the following disclaimer in the
28 * documentation and/or other materials provided with the distribution.
30 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
31 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
32 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
33 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
34 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
35 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
36 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
37 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
39 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
44 #include <sys/types.h>
45 #include <sys/ioctl.h>
47 #include <sys/socket.h>
48 #ifdef HAVE_SYS_TIME_H
49 # include <sys/time.h>
52 #include <netinet/in.h>
53 #include <arpa/inet.h>
64 #include "openbsd-compat/sys-queue.h"
78 #include "pathnames.h"
83 * Pointer to an array containing all allocated channels. The array is
84 * dynamically extended as needed.
86 static Channel
**channels
= NULL
;
89 * Size of the channel array. All slots of the array must always be
90 * initialized (at least the type field); unused slots set to NULL
92 static u_int channels_alloc
= 0;
95 * Maximum file descriptor value used in any of the channels. This is
96 * updated in channel_new.
98 static int channel_max_fd
= 0;
101 /* -- tcp forwarding */
104 * Data structure for storing which hosts are permitted for forward requests.
105 * The local sides of any remote forwards are stored in this array to prevent
106 * a corrupt remote server from accessing arbitrary TCP/IP ports on our local
107 * network (which might be behind a firewall).
110 char *host_to_connect
; /* Connect to 'host'. */
111 u_short port_to_connect
; /* Connect to 'port'. */
112 u_short listen_port
; /* Remote side should listen port number. */
115 /* List of all permitted host/port pairs to connect by the user. */
116 static ForwardPermission permitted_opens
[SSH_MAX_FORWARDS_PER_DIRECTION
];
118 /* List of all permitted host/port pairs to connect by the admin. */
119 static ForwardPermission permitted_adm_opens
[SSH_MAX_FORWARDS_PER_DIRECTION
];
121 /* Number of permitted host/port pairs in the array permitted by the user. */
122 static int num_permitted_opens
= 0;
124 /* Number of permitted host/port pair in the array permitted by the admin. */
125 static int num_adm_permitted_opens
= 0;
128 * If this is true, all opens are permitted. This is the case on the server
129 * on which we have to trust the client anyway, and the user could do
130 * anything after logging in anyway.
132 static int all_opens_permitted
= 0;
135 /* -- X11 forwarding */
137 /* Maximum number of fake X11 displays to try. */
138 #define MAX_DISPLAYS 1000
140 /* Saved X11 local (client) display. */
141 static char *x11_saved_display
= NULL
;
143 /* Saved X11 authentication protocol name. */
144 static char *x11_saved_proto
= NULL
;
146 /* Saved X11 authentication data. This is the real data. */
147 static char *x11_saved_data
= NULL
;
148 static u_int x11_saved_data_len
= 0;
151 * Fake X11 authentication data. This is what the server will be sending us;
152 * we should replace any occurrences of this by the real data.
154 static u_char
*x11_fake_data
= NULL
;
155 static u_int x11_fake_data_len
;
158 /* -- agent forwarding */
162 /* AF_UNSPEC or AF_INET or AF_INET6 */
163 static int IPv4or6
= AF_UNSPEC
;
166 static void port_open_helper(Channel
*c
, char *rtype
);
168 /* non-blocking connect helpers */
169 static int connect_next(struct channel_connect
*);
170 static void channel_connect_ctx_free(struct channel_connect
*);
172 /* -- channel core */
175 channel_by_id(int id
)
179 if (id
< 0 || (u_int
)id
>= channels_alloc
) {
180 logit("channel_by_id: %d: bad id", id
);
185 logit("channel_by_id: %d: bad id: channel free", id
);
192 * Returns the channel if it is allowed to receive protocol messages.
193 * Private channels, like listening sockets, may not receive messages.
196 channel_lookup(int id
)
200 if ((c
= channel_by_id(id
)) == NULL
)
204 case SSH_CHANNEL_X11_OPEN
:
205 case SSH_CHANNEL_LARVAL
:
206 case SSH_CHANNEL_CONNECTING
:
207 case SSH_CHANNEL_DYNAMIC
:
208 case SSH_CHANNEL_OPENING
:
209 case SSH_CHANNEL_OPEN
:
210 case SSH_CHANNEL_INPUT_DRAINING
:
211 case SSH_CHANNEL_OUTPUT_DRAINING
:
214 logit("Non-public channel %d, type %d.", id
, c
->type
);
219 * Register filedescriptors for a channel, used when allocating a channel or
220 * when the channel consumer/producer is ready, e.g. shell exec'd
223 channel_register_fds(Channel
*c
, int rfd
, int wfd
, int efd
,
224 int extusage
, int nonblock
, int is_tty
)
226 /* Update the maximum file descriptor value. */
227 channel_max_fd
= MAX(channel_max_fd
, rfd
);
228 channel_max_fd
= MAX(channel_max_fd
, wfd
);
229 channel_max_fd
= MAX(channel_max_fd
, efd
);
231 /* XXX set close-on-exec -markus */
235 c
->sock
= (rfd
== wfd
) ? rfd
: -1;
236 c
->ctl_fd
= -1; /* XXX: set elsewhere */
238 c
->extended_usage
= extusage
;
240 if ((c
->isatty
= is_tty
) != 0)
241 debug2("channel %d: rfd %d isatty", c
->self
, c
->rfd
);
242 c
->wfd_isatty
= is_tty
|| isatty(c
->wfd
);
244 /* enable nonblocking mode */
256 * Allocate a new channel object and set its type and socket. This will cause
257 * remote_name to be freed.
260 channel_new(char *ctype
, int type
, int rfd
, int wfd
, int efd
,
261 u_int window
, u_int maxpack
, int extusage
, char *remote_name
, int nonblock
)
267 /* Do initial allocation if this is the first call. */
268 if (channels_alloc
== 0) {
270 channels
= xcalloc(channels_alloc
, sizeof(Channel
*));
271 for (i
= 0; i
< channels_alloc
; i
++)
274 /* Try to find a free slot where to put the new channel. */
275 for (found
= -1, i
= 0; i
< channels_alloc
; i
++)
276 if (channels
[i
] == NULL
) {
277 /* Found a free slot. */
282 /* There are no free slots. Take last+1 slot and expand the array. */
283 found
= channels_alloc
;
284 if (channels_alloc
> 10000)
285 fatal("channel_new: internal error: channels_alloc %d "
286 "too big.", channels_alloc
);
287 channels
= xrealloc(channels
, channels_alloc
+ 10,
289 channels_alloc
+= 10;
290 debug2("channel: expanding %d", channels_alloc
);
291 for (i
= found
; i
< channels_alloc
; i
++)
294 /* Initialize and return new channel. */
295 c
= channels
[found
] = xcalloc(1, sizeof(Channel
));
296 buffer_init(&c
->input
);
297 buffer_init(&c
->output
);
298 buffer_init(&c
->extended
);
300 c
->ostate
= CHAN_OUTPUT_OPEN
;
301 c
->istate
= CHAN_INPUT_OPEN
;
303 channel_register_fds(c
, rfd
, wfd
, efd
, extusage
, nonblock
, 0);
307 c
->local_window
= window
;
308 c
->local_window_max
= window
;
309 c
->local_consumed
= 0;
310 c
->local_maxpacket
= maxpack
;
312 c
->remote_name
= xstrdup(remote_name
);
313 c
->remote_window
= 0;
314 c
->remote_maxpacket
= 0;
316 c
->single_connection
= 0;
317 c
->detach_user
= NULL
;
319 c
->open_confirm
= NULL
;
320 c
->open_confirm_ctx
= NULL
;
321 c
->input_filter
= NULL
;
322 c
->output_filter
= NULL
;
323 c
->filter_ctx
= NULL
;
324 c
->filter_cleanup
= NULL
;
325 TAILQ_INIT(&c
->status_confirms
);
326 debug("channel %d: new [%s]", found
, remote_name
);
331 channel_find_maxfd(void)
337 for (i
= 0; i
< channels_alloc
; i
++) {
340 max
= MAX(max
, c
->rfd
);
341 max
= MAX(max
, c
->wfd
);
342 max
= MAX(max
, c
->efd
);
349 channel_close_fd(int *fdp
)
351 int ret
= 0, fd
= *fdp
;
356 if (fd
== channel_max_fd
)
357 channel_max_fd
= channel_find_maxfd();
362 /* Close all channel fd/socket. */
364 channel_close_fds(Channel
*c
)
366 debug3("channel %d: close_fds r %d w %d e %d c %d",
367 c
->self
, c
->rfd
, c
->wfd
, c
->efd
, c
->ctl_fd
);
369 channel_close_fd(&c
->sock
);
370 channel_close_fd(&c
->ctl_fd
);
371 channel_close_fd(&c
->rfd
);
372 channel_close_fd(&c
->wfd
);
373 channel_close_fd(&c
->efd
);
376 /* Free the channel and close its fd/socket. */
378 channel_free(Channel
*c
)
382 struct channel_confirm
*cc
;
384 for (n
= 0, i
= 0; i
< channels_alloc
; i
++)
387 debug("channel %d: free: %s, nchannels %u", c
->self
,
388 c
->remote_name
? c
->remote_name
: "???", n
);
390 s
= channel_open_message();
391 debug3("channel %d: status: %s", c
->self
, s
);
395 shutdown(c
->sock
, SHUT_RDWR
);
397 shutdown(c
->ctl_fd
, SHUT_RDWR
);
398 channel_close_fds(c
);
399 buffer_free(&c
->input
);
400 buffer_free(&c
->output
);
401 buffer_free(&c
->extended
);
402 if (c
->remote_name
) {
403 xfree(c
->remote_name
);
404 c
->remote_name
= NULL
;
410 while ((cc
= TAILQ_FIRST(&c
->status_confirms
)) != NULL
) {
411 if (cc
->abandon_cb
!= NULL
)
412 cc
->abandon_cb(c
, cc
->ctx
);
413 TAILQ_REMOVE(&c
->status_confirms
, cc
, entry
);
414 bzero(cc
, sizeof(*cc
));
417 if (c
->filter_cleanup
!= NULL
&& c
->filter_ctx
!= NULL
)
418 c
->filter_cleanup(c
->self
, c
->filter_ctx
);
419 channels
[c
->self
] = NULL
;
424 channel_free_all(void)
428 for (i
= 0; i
< channels_alloc
; i
++)
429 if (channels
[i
] != NULL
)
430 channel_free(channels
[i
]);
434 * Closes the sockets/fds of all channels. This is used to close extra file
435 * descriptors after a fork.
438 channel_close_all(void)
442 for (i
= 0; i
< channels_alloc
; i
++)
443 if (channels
[i
] != NULL
)
444 channel_close_fds(channels
[i
]);
448 * Stop listening to channels.
451 channel_stop_listening(void)
456 for (i
= 0; i
< channels_alloc
; i
++) {
460 case SSH_CHANNEL_AUTH_SOCKET
:
461 case SSH_CHANNEL_PORT_LISTENER
:
462 case SSH_CHANNEL_RPORT_LISTENER
:
463 case SSH_CHANNEL_X11_LISTENER
:
464 channel_close_fd(&c
->sock
);
473 * Returns true if no channel has too much buffered data, and false if one or
474 * more channel is overfull.
477 channel_not_very_much_buffered_data(void)
482 for (i
= 0; i
< channels_alloc
; i
++) {
484 if (c
!= NULL
&& c
->type
== SSH_CHANNEL_OPEN
) {
487 buffer_len(&c
->input
) > packet_get_maxsize()) {
488 debug2("channel %d: big input buffer %d",
489 c
->self
, buffer_len(&c
->input
));
493 if (buffer_len(&c
->output
) > packet_get_maxsize()) {
494 debug2("channel %d: big output buffer %u > %u",
495 c
->self
, buffer_len(&c
->output
),
496 packet_get_maxsize());
504 /* Returns true if any channel is still open. */
506 channel_still_open(void)
511 for (i
= 0; i
< channels_alloc
; i
++) {
516 case SSH_CHANNEL_X11_LISTENER
:
517 case SSH_CHANNEL_PORT_LISTENER
:
518 case SSH_CHANNEL_RPORT_LISTENER
:
519 case SSH_CHANNEL_CLOSED
:
520 case SSH_CHANNEL_AUTH_SOCKET
:
521 case SSH_CHANNEL_DYNAMIC
:
522 case SSH_CHANNEL_CONNECTING
:
523 case SSH_CHANNEL_ZOMBIE
:
525 case SSH_CHANNEL_LARVAL
:
527 fatal("cannot happen: SSH_CHANNEL_LARVAL");
529 case SSH_CHANNEL_OPENING
:
530 case SSH_CHANNEL_OPEN
:
531 case SSH_CHANNEL_X11_OPEN
:
533 case SSH_CHANNEL_INPUT_DRAINING
:
534 case SSH_CHANNEL_OUTPUT_DRAINING
:
536 fatal("cannot happen: OUT_DRAIN");
539 fatal("channel_still_open: bad channel type %d", c
->type
);
546 /* Returns the id of an open channel suitable for keepaliving */
548 channel_find_open(void)
553 for (i
= 0; i
< channels_alloc
; i
++) {
555 if (c
== NULL
|| c
->remote_id
< 0)
558 case SSH_CHANNEL_CLOSED
:
559 case SSH_CHANNEL_DYNAMIC
:
560 case SSH_CHANNEL_X11_LISTENER
:
561 case SSH_CHANNEL_PORT_LISTENER
:
562 case SSH_CHANNEL_RPORT_LISTENER
:
563 case SSH_CHANNEL_OPENING
:
564 case SSH_CHANNEL_CONNECTING
:
565 case SSH_CHANNEL_ZOMBIE
:
567 case SSH_CHANNEL_LARVAL
:
568 case SSH_CHANNEL_AUTH_SOCKET
:
569 case SSH_CHANNEL_OPEN
:
570 case SSH_CHANNEL_X11_OPEN
:
572 case SSH_CHANNEL_INPUT_DRAINING
:
573 case SSH_CHANNEL_OUTPUT_DRAINING
:
575 fatal("cannot happen: OUT_DRAIN");
578 fatal("channel_find_open: bad channel type %d", c
->type
);
587 * Returns a message describing the currently open forwarded connections,
588 * suitable for sending to the client. The message contains crlf pairs for
592 channel_open_message(void)
599 buffer_init(&buffer
);
600 snprintf(buf
, sizeof buf
, "The following connections are open:\r\n");
601 buffer_append(&buffer
, buf
, strlen(buf
));
602 for (i
= 0; i
< channels_alloc
; i
++) {
607 case SSH_CHANNEL_X11_LISTENER
:
608 case SSH_CHANNEL_PORT_LISTENER
:
609 case SSH_CHANNEL_RPORT_LISTENER
:
610 case SSH_CHANNEL_CLOSED
:
611 case SSH_CHANNEL_AUTH_SOCKET
:
612 case SSH_CHANNEL_ZOMBIE
:
614 case SSH_CHANNEL_LARVAL
:
615 case SSH_CHANNEL_OPENING
:
616 case SSH_CHANNEL_CONNECTING
:
617 case SSH_CHANNEL_DYNAMIC
:
618 case SSH_CHANNEL_OPEN
:
619 case SSH_CHANNEL_X11_OPEN
:
620 case SSH_CHANNEL_INPUT_DRAINING
:
621 case SSH_CHANNEL_OUTPUT_DRAINING
:
622 snprintf(buf
, sizeof buf
,
623 " #%d %.300s (t%d r%d i%d/%d o%d/%d fd %d/%d cfd %d)\r\n",
624 c
->self
, c
->remote_name
,
625 c
->type
, c
->remote_id
,
626 c
->istate
, buffer_len(&c
->input
),
627 c
->ostate
, buffer_len(&c
->output
),
628 c
->rfd
, c
->wfd
, c
->ctl_fd
);
629 buffer_append(&buffer
, buf
, strlen(buf
));
632 fatal("channel_open_message: bad channel type %d", c
->type
);
636 buffer_append(&buffer
, "\0", 1);
637 cp
= xstrdup(buffer_ptr(&buffer
));
638 buffer_free(&buffer
);
643 channel_send_open(int id
)
645 Channel
*c
= channel_lookup(id
);
648 logit("channel_send_open: %d: bad id", id
);
651 debug2("channel %d: send open", id
);
652 packet_start(SSH2_MSG_CHANNEL_OPEN
);
653 packet_put_cstring(c
->ctype
);
654 packet_put_int(c
->self
);
655 packet_put_int(c
->local_window
);
656 packet_put_int(c
->local_maxpacket
);
661 channel_request_start(int id
, char *service
, int wantconfirm
)
663 Channel
*c
= channel_lookup(id
);
666 logit("channel_request_start: %d: unknown channel id", id
);
669 debug2("channel %d: request %s confirm %d", id
, service
, wantconfirm
);
670 packet_start(SSH2_MSG_CHANNEL_REQUEST
);
671 packet_put_int(c
->remote_id
);
672 packet_put_cstring(service
);
673 packet_put_char(wantconfirm
);
677 channel_register_status_confirm(int id
, channel_confirm_cb
*cb
,
678 channel_confirm_abandon_cb
*abandon_cb
, void *ctx
)
680 struct channel_confirm
*cc
;
683 if ((c
= channel_lookup(id
)) == NULL
)
684 fatal("channel_register_expect: %d: bad id", id
);
686 cc
= xmalloc(sizeof(*cc
));
688 cc
->abandon_cb
= abandon_cb
;
690 TAILQ_INSERT_TAIL(&c
->status_confirms
, cc
, entry
);
694 channel_register_open_confirm(int id
, channel_callback_fn
*fn
, void *ctx
)
696 Channel
*c
= channel_lookup(id
);
699 logit("channel_register_open_confirm: %d: bad id", id
);
702 c
->open_confirm
= fn
;
703 c
->open_confirm_ctx
= ctx
;
707 channel_register_cleanup(int id
, channel_callback_fn
*fn
, int do_close
)
709 Channel
*c
= channel_by_id(id
);
712 logit("channel_register_cleanup: %d: bad id", id
);
716 c
->detach_close
= do_close
;
720 channel_cancel_cleanup(int id
)
722 Channel
*c
= channel_by_id(id
);
725 logit("channel_cancel_cleanup: %d: bad id", id
);
728 c
->detach_user
= NULL
;
733 channel_register_filter(int id
, channel_infilter_fn
*ifn
,
734 channel_outfilter_fn
*ofn
, channel_filter_cleanup_fn
*cfn
, void *ctx
)
736 Channel
*c
= channel_lookup(id
);
739 logit("channel_register_filter: %d: bad id", id
);
742 c
->input_filter
= ifn
;
743 c
->output_filter
= ofn
;
745 c
->filter_cleanup
= cfn
;
749 channel_set_fds(int id
, int rfd
, int wfd
, int efd
,
750 int extusage
, int nonblock
, int is_tty
, u_int window_max
)
752 Channel
*c
= channel_lookup(id
);
754 if (c
== NULL
|| c
->type
!= SSH_CHANNEL_LARVAL
)
755 fatal("channel_activate for non-larval channel %d.", id
);
756 channel_register_fds(c
, rfd
, wfd
, efd
, extusage
, nonblock
, is_tty
);
757 c
->type
= SSH_CHANNEL_OPEN
;
758 c
->local_window
= c
->local_window_max
= window_max
;
759 packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST
);
760 packet_put_int(c
->remote_id
);
761 packet_put_int(c
->local_window
);
766 * 'channel_pre*' are called just before select() to add any bits relevant to
767 * channels in the select bitmasks.
770 * 'channel_post*': perform any appropriate operations for channels which
771 * have events pending.
773 typedef void chan_fn(Channel
*c
, fd_set
*readset
, fd_set
*writeset
);
774 chan_fn
*channel_pre
[SSH_CHANNEL_MAX_TYPE
];
775 chan_fn
*channel_post
[SSH_CHANNEL_MAX_TYPE
];
779 channel_pre_listener(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
781 FD_SET(c
->sock
, readset
);
786 channel_pre_connecting(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
788 debug3("channel %d: waiting for connection", c
->self
);
789 FD_SET(c
->sock
, writeset
);
793 channel_pre_open_13(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
795 if (buffer_len(&c
->input
) < packet_get_maxsize())
796 FD_SET(c
->sock
, readset
);
797 if (buffer_len(&c
->output
) > 0)
798 FD_SET(c
->sock
, writeset
);
802 channel_pre_open(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
804 u_int limit
= compat20
? c
->remote_window
: packet_get_maxsize();
806 if (c
->istate
== CHAN_INPUT_OPEN
&&
808 buffer_len(&c
->input
) < limit
&&
809 buffer_check_alloc(&c
->input
, CHAN_RBUF
))
810 FD_SET(c
->rfd
, readset
);
811 if (c
->ostate
== CHAN_OUTPUT_OPEN
||
812 c
->ostate
== CHAN_OUTPUT_WAIT_DRAIN
) {
813 if (buffer_len(&c
->output
) > 0) {
814 FD_SET(c
->wfd
, writeset
);
815 } else if (c
->ostate
== CHAN_OUTPUT_WAIT_DRAIN
) {
816 if (CHANNEL_EFD_OUTPUT_ACTIVE(c
))
817 debug2("channel %d: obuf_empty delayed efd %d/(%d)",
818 c
->self
, c
->efd
, buffer_len(&c
->extended
));
823 /** XXX check close conditions, too */
824 if (compat20
&& c
->efd
!= -1 &&
825 !(c
->istate
== CHAN_INPUT_CLOSED
&& c
->ostate
== CHAN_OUTPUT_CLOSED
)) {
826 if (c
->extended_usage
== CHAN_EXTENDED_WRITE
&&
827 buffer_len(&c
->extended
) > 0)
828 FD_SET(c
->efd
, writeset
);
829 else if (!(c
->flags
& CHAN_EOF_SENT
) &&
830 c
->extended_usage
== CHAN_EXTENDED_READ
&&
831 buffer_len(&c
->extended
) < c
->remote_window
)
832 FD_SET(c
->efd
, readset
);
834 /* XXX: What about efd? races? */
835 if (compat20
&& c
->ctl_fd
!= -1 &&
836 c
->istate
== CHAN_INPUT_OPEN
&& c
->ostate
== CHAN_OUTPUT_OPEN
)
837 FD_SET(c
->ctl_fd
, readset
);
842 channel_pre_input_draining(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
844 if (buffer_len(&c
->input
) == 0) {
845 packet_start(SSH_MSG_CHANNEL_CLOSE
);
846 packet_put_int(c
->remote_id
);
848 c
->type
= SSH_CHANNEL_CLOSED
;
849 debug2("channel %d: closing after input drain.", c
->self
);
855 channel_pre_output_draining(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
857 if (buffer_len(&c
->output
) == 0)
860 FD_SET(c
->sock
, writeset
);
864 * This is a special state for X11 authentication spoofing. An opened X11
865 * connection (when authentication spoofing is being done) remains in this
866 * state until the first packet has been completely read. The authentication
867 * data in that packet is then substituted by the real data if it matches the
868 * fake data, and the channel is put into normal mode.
869 * XXX All this happens at the client side.
870 * Returns: 0 = need more data, -1 = wrong cookie, 1 = ok
873 x11_open_helper(Buffer
*b
)
876 u_int proto_len
, data_len
;
878 /* Check if the fixed size part of the packet is in buffer. */
879 if (buffer_len(b
) < 12)
882 /* Parse the lengths of variable-length fields. */
884 if (ucp
[0] == 0x42) { /* Byte order MSB first. */
885 proto_len
= 256 * ucp
[6] + ucp
[7];
886 data_len
= 256 * ucp
[8] + ucp
[9];
887 } else if (ucp
[0] == 0x6c) { /* Byte order LSB first. */
888 proto_len
= ucp
[6] + 256 * ucp
[7];
889 data_len
= ucp
[8] + 256 * ucp
[9];
891 debug2("Initial X11 packet contains bad byte order byte: 0x%x",
896 /* Check if the whole packet is in buffer. */
898 12 + ((proto_len
+ 3) & ~3) + ((data_len
+ 3) & ~3))
901 /* Check if authentication protocol matches. */
902 if (proto_len
!= strlen(x11_saved_proto
) ||
903 memcmp(ucp
+ 12, x11_saved_proto
, proto_len
) != 0) {
904 debug2("X11 connection uses different authentication protocol.");
907 /* Check if authentication data matches our fake data. */
908 if (data_len
!= x11_fake_data_len
||
909 memcmp(ucp
+ 12 + ((proto_len
+ 3) & ~3),
910 x11_fake_data
, x11_fake_data_len
) != 0) {
911 debug2("X11 auth data does not match fake data.");
914 /* Check fake data length */
915 if (x11_fake_data_len
!= x11_saved_data_len
) {
916 error("X11 fake_data_len %d != saved_data_len %d",
917 x11_fake_data_len
, x11_saved_data_len
);
921 * Received authentication protocol and data match
922 * our fake data. Substitute the fake data with real
925 memcpy(ucp
+ 12 + ((proto_len
+ 3) & ~3),
926 x11_saved_data
, x11_saved_data_len
);
931 channel_pre_x11_open_13(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
933 int ret
= x11_open_helper(&c
->output
);
936 /* Start normal processing for the channel. */
937 c
->type
= SSH_CHANNEL_OPEN
;
938 channel_pre_open_13(c
, readset
, writeset
);
939 } else if (ret
== -1) {
941 * We have received an X11 connection that has bad
942 * authentication information.
944 logit("X11 connection rejected because of wrong authentication.");
945 buffer_clear(&c
->input
);
946 buffer_clear(&c
->output
);
947 channel_close_fd(&c
->sock
);
949 c
->type
= SSH_CHANNEL_CLOSED
;
950 packet_start(SSH_MSG_CHANNEL_CLOSE
);
951 packet_put_int(c
->remote_id
);
957 channel_pre_x11_open(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
959 int ret
= x11_open_helper(&c
->output
);
961 /* c->force_drain = 1; */
964 c
->type
= SSH_CHANNEL_OPEN
;
965 channel_pre_open(c
, readset
, writeset
);
966 } else if (ret
== -1) {
967 logit("X11 connection rejected because of wrong authentication.");
968 debug2("X11 rejected %d i%d/o%d", c
->self
, c
->istate
, c
->ostate
);
970 buffer_clear(&c
->input
);
972 buffer_clear(&c
->output
);
973 /* for proto v1, the peer will send an IEOF */
975 chan_write_failed(c
);
977 c
->type
= SSH_CHANNEL_OPEN
;
978 debug2("X11 closed %d i%d/o%d", c
->self
, c
->istate
, c
->ostate
);
982 /* try to decode a socks4 header */
985 channel_decode_socks4(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
988 u_int len
, have
, i
, found
, need
;
994 struct in_addr dest_addr
;
997 debug2("channel %d: decode socks4", c
->self
);
999 have
= buffer_len(&c
->input
);
1000 len
= sizeof(s4_req
);
1003 p
= buffer_ptr(&c
->input
);
1006 /* SOCKS4A uses an invalid IP address 0.0.0.x */
1007 if (p
[4] == 0 && p
[5] == 0 && p
[6] == 0 && p
[7] != 0) {
1008 debug2("channel %d: socks4a request", c
->self
);
1009 /* ... and needs an extra string (the hostname) */
1012 /* Check for terminating NUL on the string(s) */
1013 for (found
= 0, i
= len
; i
< have
; i
++) {
1020 /* the peer is probably sending garbage */
1021 debug("channel %d: decode socks4: too long",
1028 buffer_get(&c
->input
, (char *)&s4_req
.version
, 1);
1029 buffer_get(&c
->input
, (char *)&s4_req
.command
, 1);
1030 buffer_get(&c
->input
, (char *)&s4_req
.dest_port
, 2);
1031 buffer_get(&c
->input
, (char *)&s4_req
.dest_addr
, 4);
1032 have
= buffer_len(&c
->input
);
1033 p
= buffer_ptr(&c
->input
);
1035 debug2("channel %d: decode socks4: user %s/%d", c
->self
, p
, len
);
1036 len
++; /* trailing '\0' */
1038 fatal("channel %d: decode socks4: len %d > have %d",
1039 c
->self
, len
, have
);
1040 strlcpy(username
, p
, sizeof(username
));
1041 buffer_consume(&c
->input
, len
);
1043 if (c
->path
!= NULL
) {
1047 if (need
== 1) { /* SOCKS4: one string */
1048 host
= inet_ntoa(s4_req
.dest_addr
);
1049 c
->path
= xstrdup(host
);
1050 } else { /* SOCKS4A: two strings */
1051 have
= buffer_len(&c
->input
);
1052 p
= buffer_ptr(&c
->input
);
1054 debug2("channel %d: decode socks4a: host %s/%d",
1056 len
++; /* trailing '\0' */
1058 fatal("channel %d: decode socks4a: len %d > have %d",
1059 c
->self
, len
, have
);
1060 if (len
> NI_MAXHOST
) {
1061 error("channel %d: hostname \"%.100s\" too long",
1065 c
->path
= xstrdup(p
);
1066 buffer_consume(&c
->input
, len
);
1068 c
->host_port
= ntohs(s4_req
.dest_port
);
1070 debug2("channel %d: dynamic request: socks4 host %s port %u command %u",
1071 c
->self
, c
->path
, c
->host_port
, s4_req
.command
);
1073 if (s4_req
.command
!= 1) {
1074 debug("channel %d: cannot handle: %s cn %d",
1075 c
->self
, need
== 1 ? "SOCKS4" : "SOCKS4A", s4_req
.command
);
1078 s4_rsp
.version
= 0; /* vn: 0 for reply */
1079 s4_rsp
.command
= 90; /* cd: req granted */
1080 s4_rsp
.dest_port
= 0; /* ignored */
1081 s4_rsp
.dest_addr
.s_addr
= INADDR_ANY
; /* ignored */
1082 buffer_append(&c
->output
, &s4_rsp
, sizeof(s4_rsp
));
1086 /* try to decode a socks5 header */
1087 #define SSH_SOCKS5_AUTHDONE 0x1000
1088 #define SSH_SOCKS5_NOAUTH 0x00
1089 #define SSH_SOCKS5_IPV4 0x01
1090 #define SSH_SOCKS5_DOMAIN 0x03
1091 #define SSH_SOCKS5_IPV6 0x04
1092 #define SSH_SOCKS5_CONNECT 0x01
1093 #define SSH_SOCKS5_SUCCESS 0x00
1097 channel_decode_socks5(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1105 u_int16_t dest_port
;
1106 u_char
*p
, dest_addr
[255+1], ntop
[INET6_ADDRSTRLEN
];
1107 u_int have
, need
, i
, found
, nmethods
, addrlen
, af
;
1109 debug2("channel %d: decode socks5", c
->self
);
1110 p
= buffer_ptr(&c
->input
);
1113 have
= buffer_len(&c
->input
);
1114 if (!(c
->flags
& SSH_SOCKS5_AUTHDONE
)) {
1115 /* format: ver | nmethods | methods */
1119 if (have
< nmethods
+ 2)
1121 /* look for method: "NO AUTHENTICATION REQUIRED" */
1122 for (found
= 0, i
= 2; i
< nmethods
+ 2; i
++) {
1123 if (p
[i
] == SSH_SOCKS5_NOAUTH
) {
1129 debug("channel %d: method SSH_SOCKS5_NOAUTH not found",
1133 buffer_consume(&c
->input
, nmethods
+ 2);
1134 buffer_put_char(&c
->output
, 0x05); /* version */
1135 buffer_put_char(&c
->output
, SSH_SOCKS5_NOAUTH
); /* method */
1136 FD_SET(c
->sock
, writeset
);
1137 c
->flags
|= SSH_SOCKS5_AUTHDONE
;
1138 debug2("channel %d: socks5 auth done", c
->self
);
1139 return 0; /* need more */
1141 debug2("channel %d: socks5 post auth", c
->self
);
1142 if (have
< sizeof(s5_req
)+1)
1143 return 0; /* need more */
1144 memcpy(&s5_req
, p
, sizeof(s5_req
));
1145 if (s5_req
.version
!= 0x05 ||
1146 s5_req
.command
!= SSH_SOCKS5_CONNECT
||
1147 s5_req
.reserved
!= 0x00) {
1148 debug2("channel %d: only socks5 connect supported", c
->self
);
1151 switch (s5_req
.atyp
){
1152 case SSH_SOCKS5_IPV4
:
1156 case SSH_SOCKS5_DOMAIN
:
1157 addrlen
= p
[sizeof(s5_req
)];
1160 case SSH_SOCKS5_IPV6
:
1165 debug2("channel %d: bad socks5 atyp %d", c
->self
, s5_req
.atyp
);
1168 need
= sizeof(s5_req
) + addrlen
+ 2;
1169 if (s5_req
.atyp
== SSH_SOCKS5_DOMAIN
)
1173 buffer_consume(&c
->input
, sizeof(s5_req
));
1174 if (s5_req
.atyp
== SSH_SOCKS5_DOMAIN
)
1175 buffer_consume(&c
->input
, 1); /* host string length */
1176 buffer_get(&c
->input
, (char *)&dest_addr
, addrlen
);
1177 buffer_get(&c
->input
, (char *)&dest_port
, 2);
1178 dest_addr
[addrlen
] = '\0';
1179 if (c
->path
!= NULL
) {
1183 if (s5_req
.atyp
== SSH_SOCKS5_DOMAIN
) {
1184 if (addrlen
>= NI_MAXHOST
) {
1185 error("channel %d: dynamic request: socks5 hostname "
1186 "\"%.100s\" too long", c
->self
, dest_addr
);
1189 c
->path
= xstrdup(dest_addr
);
1191 if (inet_ntop(af
, dest_addr
, ntop
, sizeof(ntop
)) == NULL
)
1193 c
->path
= xstrdup(ntop
);
1195 c
->host_port
= ntohs(dest_port
);
1197 debug2("channel %d: dynamic request: socks5 host %s port %u command %u",
1198 c
->self
, c
->path
, c
->host_port
, s5_req
.command
);
1200 s5_rsp
.version
= 0x05;
1201 s5_rsp
.command
= SSH_SOCKS5_SUCCESS
;
1202 s5_rsp
.reserved
= 0; /* ignored */
1203 s5_rsp
.atyp
= SSH_SOCKS5_IPV4
;
1204 ((struct in_addr
*)&dest_addr
)->s_addr
= INADDR_ANY
;
1205 dest_port
= 0; /* ignored */
1207 buffer_append(&c
->output
, &s5_rsp
, sizeof(s5_rsp
));
1208 buffer_append(&c
->output
, &dest_addr
, sizeof(struct in_addr
));
1209 buffer_append(&c
->output
, &dest_port
, sizeof(dest_port
));
1213 /* dynamic port forwarding */
1215 channel_pre_dynamic(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1221 have
= buffer_len(&c
->input
);
1223 debug2("channel %d: pre_dynamic: have %d", c
->self
, have
);
1224 /* buffer_dump(&c->input); */
1225 /* check if the fixed size part of the packet is in buffer. */
1228 FD_SET(c
->sock
, readset
);
1231 /* try to guess the protocol */
1232 p
= buffer_ptr(&c
->input
);
1235 ret
= channel_decode_socks4(c
, readset
, writeset
);
1238 ret
= channel_decode_socks5(c
, readset
, writeset
);
1246 } else if (ret
== 0) {
1247 debug2("channel %d: pre_dynamic: need more", c
->self
);
1249 FD_SET(c
->sock
, readset
);
1251 /* switch to the next state */
1252 c
->type
= SSH_CHANNEL_OPENING
;
1253 port_open_helper(c
, "direct-tcpip");
1257 /* This is our fake X11 server socket. */
1260 channel_post_x11_listener(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1263 struct sockaddr_storage addr
;
1266 char buf
[16384], *remote_ipaddr
;
1269 if (FD_ISSET(c
->sock
, readset
)) {
1270 debug("X11 connection requested.");
1271 addrlen
= sizeof(addr
);
1272 newsock
= accept(c
->sock
, (struct sockaddr
*)&addr
, &addrlen
);
1273 if (c
->single_connection
) {
1274 debug2("single_connection: closing X11 listener.");
1275 channel_close_fd(&c
->sock
);
1279 error("accept: %.100s", strerror(errno
));
1282 set_nodelay(newsock
);
1283 remote_ipaddr
= get_peer_ipaddr(newsock
);
1284 remote_port
= get_peer_port(newsock
);
1285 snprintf(buf
, sizeof buf
, "X11 connection from %.200s port %d",
1286 remote_ipaddr
, remote_port
);
1288 nc
= channel_new("accepted x11 socket",
1289 SSH_CHANNEL_OPENING
, newsock
, newsock
, -1,
1290 c
->local_window_max
, c
->local_maxpacket
, 0, buf
, 1);
1292 packet_start(SSH2_MSG_CHANNEL_OPEN
);
1293 packet_put_cstring("x11");
1294 packet_put_int(nc
->self
);
1295 packet_put_int(nc
->local_window_max
);
1296 packet_put_int(nc
->local_maxpacket
);
1297 /* originator ipaddr and port */
1298 packet_put_cstring(remote_ipaddr
);
1299 if (datafellows
& SSH_BUG_X11FWD
) {
1300 debug2("ssh2 x11 bug compat mode");
1302 packet_put_int(remote_port
);
1306 packet_start(SSH_SMSG_X11_OPEN
);
1307 packet_put_int(nc
->self
);
1308 if (packet_get_protocol_flags() &
1309 SSH_PROTOFLAG_HOST_IN_FWD_OPEN
)
1310 packet_put_cstring(buf
);
1313 xfree(remote_ipaddr
);
1318 port_open_helper(Channel
*c
, char *rtype
)
1322 char *remote_ipaddr
= get_peer_ipaddr(c
->sock
);
1323 int remote_port
= get_peer_port(c
->sock
);
1325 direct
= (strcmp(rtype
, "direct-tcpip") == 0);
1327 snprintf(buf
, sizeof buf
,
1328 "%s: listening port %d for %.100s port %d, "
1329 "connect from %.200s port %d",
1330 rtype
, c
->listening_port
, c
->path
, c
->host_port
,
1331 remote_ipaddr
, remote_port
);
1333 xfree(c
->remote_name
);
1334 c
->remote_name
= xstrdup(buf
);
1337 packet_start(SSH2_MSG_CHANNEL_OPEN
);
1338 packet_put_cstring(rtype
);
1339 packet_put_int(c
->self
);
1340 packet_put_int(c
->local_window_max
);
1341 packet_put_int(c
->local_maxpacket
);
1343 /* target host, port */
1344 packet_put_cstring(c
->path
);
1345 packet_put_int(c
->host_port
);
1347 /* listen address, port */
1348 packet_put_cstring(c
->path
);
1349 packet_put_int(c
->listening_port
);
1351 /* originator host and port */
1352 packet_put_cstring(remote_ipaddr
);
1353 packet_put_int((u_int
)remote_port
);
1356 packet_start(SSH_MSG_PORT_OPEN
);
1357 packet_put_int(c
->self
);
1358 packet_put_cstring(c
->path
);
1359 packet_put_int(c
->host_port
);
1360 if (packet_get_protocol_flags() &
1361 SSH_PROTOFLAG_HOST_IN_FWD_OPEN
)
1362 packet_put_cstring(c
->remote_name
);
1365 xfree(remote_ipaddr
);
1369 channel_set_reuseaddr(int fd
)
1374 * Set socket options.
1375 * Allow local port reuse in TIME_WAIT.
1377 if (setsockopt(fd
, SOL_SOCKET
, SO_REUSEADDR
, &on
, sizeof(on
)) == -1)
1378 error("setsockopt SO_REUSEADDR fd %d: %s", fd
, strerror(errno
));
1382 * This socket is listening for connections to a forwarded TCP/IP port.
1386 channel_post_port_listener(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1389 struct sockaddr_storage addr
;
1390 int newsock
, nextstate
;
1394 if (FD_ISSET(c
->sock
, readset
)) {
1395 debug("Connection to port %d forwarding "
1396 "to %.100s port %d requested.",
1397 c
->listening_port
, c
->path
, c
->host_port
);
1399 if (c
->type
== SSH_CHANNEL_RPORT_LISTENER
) {
1400 nextstate
= SSH_CHANNEL_OPENING
;
1401 rtype
= "forwarded-tcpip";
1403 if (c
->host_port
== 0) {
1404 nextstate
= SSH_CHANNEL_DYNAMIC
;
1405 rtype
= "dynamic-tcpip";
1407 nextstate
= SSH_CHANNEL_OPENING
;
1408 rtype
= "direct-tcpip";
1412 addrlen
= sizeof(addr
);
1413 newsock
= accept(c
->sock
, (struct sockaddr
*)&addr
, &addrlen
);
1415 error("accept: %.100s", strerror(errno
));
1418 set_nodelay(newsock
);
1419 nc
= channel_new(rtype
, nextstate
, newsock
, newsock
, -1,
1420 c
->local_window_max
, c
->local_maxpacket
, 0, rtype
, 1);
1421 nc
->listening_port
= c
->listening_port
;
1422 nc
->host_port
= c
->host_port
;
1423 if (c
->path
!= NULL
)
1424 nc
->path
= xstrdup(c
->path
);
1426 if (nextstate
== SSH_CHANNEL_DYNAMIC
) {
1428 * do not call the channel_post handler until
1429 * this flag has been reset by a pre-handler.
1430 * otherwise the FD_ISSET calls might overflow
1434 port_open_helper(nc
, rtype
);
1440 * This is the authentication agent socket listening for connections from
1445 channel_post_auth_listener(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1449 struct sockaddr_storage addr
;
1452 if (FD_ISSET(c
->sock
, readset
)) {
1453 addrlen
= sizeof(addr
);
1454 newsock
= accept(c
->sock
, (struct sockaddr
*)&addr
, &addrlen
);
1456 error("accept from auth socket: %.100s", strerror(errno
));
1459 nc
= channel_new("accepted auth socket",
1460 SSH_CHANNEL_OPENING
, newsock
, newsock
, -1,
1461 c
->local_window_max
, c
->local_maxpacket
,
1462 0, "accepted auth socket", 1);
1464 packet_start(SSH2_MSG_CHANNEL_OPEN
);
1465 packet_put_cstring("auth-agent@openssh.com");
1466 packet_put_int(nc
->self
);
1467 packet_put_int(c
->local_window_max
);
1468 packet_put_int(c
->local_maxpacket
);
1470 packet_start(SSH_SMSG_AGENT_OPEN
);
1471 packet_put_int(nc
->self
);
1479 channel_post_connecting(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1482 socklen_t sz
= sizeof(err
);
1484 if (FD_ISSET(c
->sock
, writeset
)) {
1485 if (getsockopt(c
->sock
, SOL_SOCKET
, SO_ERROR
, &err
, &sz
) < 0) {
1487 error("getsockopt SO_ERROR failed");
1490 debug("channel %d: connected to %s port %d",
1491 c
->self
, c
->connect_ctx
.host
, c
->connect_ctx
.port
);
1492 channel_connect_ctx_free(&c
->connect_ctx
);
1493 c
->type
= SSH_CHANNEL_OPEN
;
1495 packet_start(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION
);
1496 packet_put_int(c
->remote_id
);
1497 packet_put_int(c
->self
);
1498 packet_put_int(c
->local_window
);
1499 packet_put_int(c
->local_maxpacket
);
1501 packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION
);
1502 packet_put_int(c
->remote_id
);
1503 packet_put_int(c
->self
);
1506 debug("channel %d: connection failed: %s",
1507 c
->self
, strerror(err
));
1508 /* Try next address, if any */
1509 if ((sock
= connect_next(&c
->connect_ctx
)) > 0) {
1511 c
->sock
= c
->rfd
= c
->wfd
= sock
;
1512 channel_max_fd
= channel_find_maxfd();
1515 /* Exhausted all addresses */
1516 error("connect_to %.100s port %d: failed.",
1517 c
->connect_ctx
.host
, c
->connect_ctx
.port
);
1518 channel_connect_ctx_free(&c
->connect_ctx
);
1520 packet_start(SSH2_MSG_CHANNEL_OPEN_FAILURE
);
1521 packet_put_int(c
->remote_id
);
1522 packet_put_int(SSH2_OPEN_CONNECT_FAILED
);
1523 if (!(datafellows
& SSH_BUG_OPENFAILURE
)) {
1524 packet_put_cstring(strerror(err
));
1525 packet_put_cstring("");
1528 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE
);
1529 packet_put_int(c
->remote_id
);
1539 channel_handle_rfd(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1541 char buf
[CHAN_RBUF
];
1544 force
= c
->isatty
&& c
->detach_close
&& c
->istate
!= CHAN_INPUT_CLOSED
;
1545 if (c
->rfd
!= -1 && (force
|| FD_ISSET(c
->rfd
, readset
))) {
1547 len
= read(c
->rfd
, buf
, sizeof(buf
));
1548 if (len
< 0 && (errno
== EINTR
||
1549 ((errno
== EAGAIN
|| errno
== EWOULDBLOCK
) && !force
)))
1551 #ifndef PTY_ZEROREAD
1554 if ((!c
->isatty
&& len
<= 0) ||
1555 (c
->isatty
&& (len
< 0 || (len
== 0 && errno
!= 0)))) {
1557 debug2("channel %d: read<=0 rfd %d len %d",
1558 c
->self
, c
->rfd
, len
);
1559 if (c
->type
!= SSH_CHANNEL_OPEN
) {
1560 debug2("channel %d: not open", c
->self
);
1563 } else if (compat13
) {
1564 buffer_clear(&c
->output
);
1565 c
->type
= SSH_CHANNEL_INPUT_DRAINING
;
1566 debug2("channel %d: input draining.", c
->self
);
1568 chan_read_failed(c
);
1572 if (c
->input_filter
!= NULL
) {
1573 if (c
->input_filter(c
, buf
, len
) == -1) {
1574 debug2("channel %d: filter stops", c
->self
);
1575 chan_read_failed(c
);
1577 } else if (c
->datagram
) {
1578 buffer_put_string(&c
->input
, buf
, len
);
1580 buffer_append(&c
->input
, buf
, len
);
1588 channel_handle_wfd(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1591 u_char
*data
= NULL
, *buf
;
1595 /* Send buffered output data to the socket. */
1597 FD_ISSET(c
->wfd
, writeset
) &&
1598 buffer_len(&c
->output
) > 0) {
1599 if (c
->output_filter
!= NULL
) {
1600 if ((buf
= c
->output_filter(c
, &data
, &dlen
)) == NULL
) {
1601 debug2("channel %d: filter stops", c
->self
);
1602 if (c
->type
!= SSH_CHANNEL_OPEN
)
1605 chan_write_failed(c
);
1608 } else if (c
->datagram
) {
1609 buf
= data
= buffer_get_string(&c
->output
, &dlen
);
1611 buf
= data
= buffer_ptr(&c
->output
);
1612 dlen
= buffer_len(&c
->output
);
1616 /* ignore truncated writes, datagrams might get lost */
1617 c
->local_consumed
+= dlen
+ 4;
1618 len
= write(c
->wfd
, buf
, dlen
);
1620 if (len
< 0 && (errno
== EINTR
|| errno
== EAGAIN
||
1621 errno
== EWOULDBLOCK
))
1624 if (c
->type
!= SSH_CHANNEL_OPEN
)
1627 chan_write_failed(c
);
1633 /* XXX: Later AIX versions can't push as much data to tty */
1634 if (compat20
&& c
->wfd_isatty
)
1635 dlen
= MIN(dlen
, 8*1024);
1638 len
= write(c
->wfd
, buf
, dlen
);
1640 (errno
== EINTR
|| errno
== EAGAIN
|| errno
== EWOULDBLOCK
))
1643 if (c
->type
!= SSH_CHANNEL_OPEN
) {
1644 debug2("channel %d: not open", c
->self
);
1647 } else if (compat13
) {
1648 buffer_clear(&c
->output
);
1649 debug2("channel %d: input draining.", c
->self
);
1650 c
->type
= SSH_CHANNEL_INPUT_DRAINING
;
1652 chan_write_failed(c
);
1656 #ifndef BROKEN_TCGETATTR_ICANON
1657 if (compat20
&& c
->isatty
&& dlen
>= 1 && buf
[0] != '\r') {
1658 if (tcgetattr(c
->wfd
, &tio
) == 0 &&
1659 !(tio
.c_lflag
& ECHO
) && (tio
.c_lflag
& ICANON
)) {
1661 * Simulate echo to reduce the impact of
1662 * traffic analysis. We need to match the
1663 * size of a SSH2_MSG_CHANNEL_DATA message
1664 * (4 byte channel id + buf)
1666 packet_send_ignore(4 + len
);
1671 buffer_consume(&c
->output
, len
);
1672 if (compat20
&& len
> 0) {
1673 c
->local_consumed
+= len
;
1680 channel_handle_efd(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1682 char buf
[CHAN_RBUF
];
1685 /** XXX handle drain efd, too */
1687 if (c
->extended_usage
== CHAN_EXTENDED_WRITE
&&
1688 FD_ISSET(c
->efd
, writeset
) &&
1689 buffer_len(&c
->extended
) > 0) {
1690 len
= write(c
->efd
, buffer_ptr(&c
->extended
),
1691 buffer_len(&c
->extended
));
1692 debug2("channel %d: written %d to efd %d",
1693 c
->self
, len
, c
->efd
);
1694 if (len
< 0 && (errno
== EINTR
|| errno
== EAGAIN
||
1695 errno
== EWOULDBLOCK
))
1698 debug2("channel %d: closing write-efd %d",
1700 channel_close_fd(&c
->efd
);
1702 buffer_consume(&c
->extended
, len
);
1703 c
->local_consumed
+= len
;
1705 } else if (c
->extended_usage
== CHAN_EXTENDED_READ
&&
1706 (c
->detach_close
|| FD_ISSET(c
->efd
, readset
))) {
1707 len
= read(c
->efd
, buf
, sizeof(buf
));
1708 debug2("channel %d: read %d from efd %d",
1709 c
->self
, len
, c
->efd
);
1710 if (len
< 0 && (errno
== EINTR
|| ((errno
== EAGAIN
||
1711 errno
== EWOULDBLOCK
) && !c
->detach_close
)))
1714 debug2("channel %d: closing read-efd %d",
1716 channel_close_fd(&c
->efd
);
1718 buffer_append(&c
->extended
, buf
, len
);
1727 channel_handle_ctl(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1732 /* Monitor control fd to detect if the slave client exits */
1733 if (c
->ctl_fd
!= -1 && FD_ISSET(c
->ctl_fd
, readset
)) {
1734 len
= read(c
->ctl_fd
, buf
, sizeof(buf
));
1736 (errno
== EINTR
|| errno
== EAGAIN
|| errno
== EWOULDBLOCK
))
1739 debug2("channel %d: ctl read<=0", c
->self
);
1740 if (c
->type
!= SSH_CHANNEL_OPEN
) {
1741 debug2("channel %d: not open", c
->self
);
1745 chan_read_failed(c
);
1746 chan_write_failed(c
);
1750 fatal("%s: unexpected data on ctl fd", __func__
);
1756 channel_check_window(Channel
*c
)
1758 if (c
->type
== SSH_CHANNEL_OPEN
&&
1759 !(c
->flags
& (CHAN_CLOSE_SENT
|CHAN_CLOSE_RCVD
)) &&
1760 ((c
->local_window_max
- c
->local_window
>
1761 c
->local_maxpacket
*3) ||
1762 c
->local_window
< c
->local_window_max
/2) &&
1763 c
->local_consumed
> 0) {
1764 packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST
);
1765 packet_put_int(c
->remote_id
);
1766 packet_put_int(c
->local_consumed
);
1768 debug2("channel %d: window %d sent adjust %d",
1769 c
->self
, c
->local_window
,
1771 c
->local_window
+= c
->local_consumed
;
1772 c
->local_consumed
= 0;
1778 channel_post_open(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1782 channel_handle_rfd(c
, readset
, writeset
);
1783 channel_handle_wfd(c
, readset
, writeset
);
1786 channel_handle_efd(c
, readset
, writeset
);
1787 channel_handle_ctl(c
, readset
, writeset
);
1788 channel_check_window(c
);
1793 channel_post_output_drain_13(Channel
*c
, fd_set
*readset
, fd_set
*writeset
)
1797 /* Send buffered output data to the socket. */
1798 if (FD_ISSET(c
->sock
, writeset
) && buffer_len(&c
->output
) > 0) {
1799 len
= write(c
->sock
, buffer_ptr(&c
->output
),
1800 buffer_len(&c
->output
));
1802 buffer_clear(&c
->output
);
1804 buffer_consume(&c
->output
, len
);
1809 channel_handler_init_20(void)
1811 channel_pre
[SSH_CHANNEL_OPEN
] = &channel_pre_open
;
1812 channel_pre
[SSH_CHANNEL_X11_OPEN
] = &channel_pre_x11_open
;
1813 channel_pre
[SSH_CHANNEL_PORT_LISTENER
] = &channel_pre_listener
;
1814 channel_pre
[SSH_CHANNEL_RPORT_LISTENER
] = &channel_pre_listener
;
1815 channel_pre
[SSH_CHANNEL_X11_LISTENER
] = &channel_pre_listener
;
1816 channel_pre
[SSH_CHANNEL_AUTH_SOCKET
] = &channel_pre_listener
;
1817 channel_pre
[SSH_CHANNEL_CONNECTING
] = &channel_pre_connecting
;
1818 channel_pre
[SSH_CHANNEL_DYNAMIC
] = &channel_pre_dynamic
;
1820 channel_post
[SSH_CHANNEL_OPEN
] = &channel_post_open
;
1821 channel_post
[SSH_CHANNEL_PORT_LISTENER
] = &channel_post_port_listener
;
1822 channel_post
[SSH_CHANNEL_RPORT_LISTENER
] = &channel_post_port_listener
;
1823 channel_post
[SSH_CHANNEL_X11_LISTENER
] = &channel_post_x11_listener
;
1824 channel_post
[SSH_CHANNEL_AUTH_SOCKET
] = &channel_post_auth_listener
;
1825 channel_post
[SSH_CHANNEL_CONNECTING
] = &channel_post_connecting
;
1826 channel_post
[SSH_CHANNEL_DYNAMIC
] = &channel_post_open
;
1830 channel_handler_init_13(void)
1832 channel_pre
[SSH_CHANNEL_OPEN
] = &channel_pre_open_13
;
1833 channel_pre
[SSH_CHANNEL_X11_OPEN
] = &channel_pre_x11_open_13
;
1834 channel_pre
[SSH_CHANNEL_X11_LISTENER
] = &channel_pre_listener
;
1835 channel_pre
[SSH_CHANNEL_PORT_LISTENER
] = &channel_pre_listener
;
1836 channel_pre
[SSH_CHANNEL_AUTH_SOCKET
] = &channel_pre_listener
;
1837 channel_pre
[SSH_CHANNEL_INPUT_DRAINING
] = &channel_pre_input_draining
;
1838 channel_pre
[SSH_CHANNEL_OUTPUT_DRAINING
] = &channel_pre_output_draining
;
1839 channel_pre
[SSH_CHANNEL_CONNECTING
] = &channel_pre_connecting
;
1840 channel_pre
[SSH_CHANNEL_DYNAMIC
] = &channel_pre_dynamic
;
1842 channel_post
[SSH_CHANNEL_OPEN
] = &channel_post_open
;
1843 channel_post
[SSH_CHANNEL_X11_LISTENER
] = &channel_post_x11_listener
;
1844 channel_post
[SSH_CHANNEL_PORT_LISTENER
] = &channel_post_port_listener
;
1845 channel_post
[SSH_CHANNEL_AUTH_SOCKET
] = &channel_post_auth_listener
;
1846 channel_post
[SSH_CHANNEL_OUTPUT_DRAINING
] = &channel_post_output_drain_13
;
1847 channel_post
[SSH_CHANNEL_CONNECTING
] = &channel_post_connecting
;
1848 channel_post
[SSH_CHANNEL_DYNAMIC
] = &channel_post_open
;
1852 channel_handler_init_15(void)
1854 channel_pre
[SSH_CHANNEL_OPEN
] = &channel_pre_open
;
1855 channel_pre
[SSH_CHANNEL_X11_OPEN
] = &channel_pre_x11_open
;
1856 channel_pre
[SSH_CHANNEL_X11_LISTENER
] = &channel_pre_listener
;
1857 channel_pre
[SSH_CHANNEL_PORT_LISTENER
] = &channel_pre_listener
;
1858 channel_pre
[SSH_CHANNEL_AUTH_SOCKET
] = &channel_pre_listener
;
1859 channel_pre
[SSH_CHANNEL_CONNECTING
] = &channel_pre_connecting
;
1860 channel_pre
[SSH_CHANNEL_DYNAMIC
] = &channel_pre_dynamic
;
1862 channel_post
[SSH_CHANNEL_X11_LISTENER
] = &channel_post_x11_listener
;
1863 channel_post
[SSH_CHANNEL_PORT_LISTENER
] = &channel_post_port_listener
;
1864 channel_post
[SSH_CHANNEL_AUTH_SOCKET
] = &channel_post_auth_listener
;
1865 channel_post
[SSH_CHANNEL_OPEN
] = &channel_post_open
;
1866 channel_post
[SSH_CHANNEL_CONNECTING
] = &channel_post_connecting
;
1867 channel_post
[SSH_CHANNEL_DYNAMIC
] = &channel_post_open
;
1871 channel_handler_init(void)
1875 for (i
= 0; i
< SSH_CHANNEL_MAX_TYPE
; i
++) {
1876 channel_pre
[i
] = NULL
;
1877 channel_post
[i
] = NULL
;
1880 channel_handler_init_20();
1882 channel_handler_init_13();
1884 channel_handler_init_15();
1887 /* gc dead channels */
1889 channel_garbage_collect(Channel
*c
)
1893 if (c
->detach_user
!= NULL
) {
1894 if (!chan_is_dead(c
, c
->detach_close
))
1896 debug2("channel %d: gc: notify user", c
->self
);
1897 c
->detach_user(c
->self
, NULL
);
1898 /* if we still have a callback */
1899 if (c
->detach_user
!= NULL
)
1901 debug2("channel %d: gc: user detached", c
->self
);
1903 if (!chan_is_dead(c
, 1))
1905 debug2("channel %d: garbage collecting", c
->self
);
1910 channel_handler(chan_fn
*ftab
[], fd_set
*readset
, fd_set
*writeset
)
1912 static int did_init
= 0;
1917 channel_handler_init();
1920 for (i
= 0; i
< channels_alloc
; i
++) {
1924 if (ftab
[c
->type
] != NULL
)
1925 (*ftab
[c
->type
])(c
, readset
, writeset
);
1926 channel_garbage_collect(c
);
1931 * Allocate/update select bitmasks and add any bits relevant to channels in
1935 channel_prepare_select(fd_set
**readsetp
, fd_set
**writesetp
, int *maxfdp
,
1936 u_int
*nallocp
, int rekeying
)
1938 u_int n
, sz
, nfdset
;
1940 n
= MAX(*maxfdp
, channel_max_fd
);
1942 nfdset
= howmany(n
+1, NFDBITS
);
1943 /* Explicitly test here, because xrealloc isn't always called */
1944 if (nfdset
&& SIZE_T_MAX
/ nfdset
< sizeof(fd_mask
))
1945 fatal("channel_prepare_select: max_fd (%d) is too large", n
);
1946 sz
= nfdset
* sizeof(fd_mask
);
1948 /* perhaps check sz < nalloc/2 and shrink? */
1949 if (*readsetp
== NULL
|| sz
> *nallocp
) {
1950 *readsetp
= xrealloc(*readsetp
, nfdset
, sizeof(fd_mask
));
1951 *writesetp
= xrealloc(*writesetp
, nfdset
, sizeof(fd_mask
));
1955 memset(*readsetp
, 0, sz
);
1956 memset(*writesetp
, 0, sz
);
1959 channel_handler(channel_pre
, *readsetp
, *writesetp
);
1963 * After select, perform any appropriate operations for channels which have
1967 channel_after_select(fd_set
*readset
, fd_set
*writeset
)
1969 channel_handler(channel_post
, readset
, writeset
);
1973 /* If there is data to send to the connection, enqueue some of it now. */
1975 channel_output_poll(void)
1980 for (i
= 0; i
< channels_alloc
; i
++) {
1986 * We are only interested in channels that can have buffered
1990 if (c
->type
!= SSH_CHANNEL_OPEN
&&
1991 c
->type
!= SSH_CHANNEL_INPUT_DRAINING
)
1994 if (c
->type
!= SSH_CHANNEL_OPEN
)
1998 (c
->flags
& (CHAN_CLOSE_SENT
|CHAN_CLOSE_RCVD
))) {
1999 /* XXX is this true? */
2000 debug3("channel %d: will not send data after close", c
->self
);
2004 /* Get the amount of buffered data for this channel. */
2005 if ((c
->istate
== CHAN_INPUT_OPEN
||
2006 c
->istate
== CHAN_INPUT_WAIT_DRAIN
) &&
2007 (len
= buffer_len(&c
->input
)) > 0) {
2013 data
= buffer_get_string(&c
->input
,
2015 packet_start(SSH2_MSG_CHANNEL_DATA
);
2016 packet_put_int(c
->remote_id
);
2017 packet_put_string(data
, dlen
);
2019 c
->remote_window
-= dlen
+ 4;
2025 * Send some data for the other side over the secure
2029 if (len
> c
->remote_window
)
2030 len
= c
->remote_window
;
2031 if (len
> c
->remote_maxpacket
)
2032 len
= c
->remote_maxpacket
;
2034 if (packet_is_interactive()) {
2038 /* Keep the packets at reasonable size. */
2039 if (len
> packet_get_maxsize()/2)
2040 len
= packet_get_maxsize()/2;
2044 packet_start(compat20
?
2045 SSH2_MSG_CHANNEL_DATA
: SSH_MSG_CHANNEL_DATA
);
2046 packet_put_int(c
->remote_id
);
2047 packet_put_string(buffer_ptr(&c
->input
), len
);
2049 buffer_consume(&c
->input
, len
);
2050 c
->remote_window
-= len
;
2052 } else if (c
->istate
== CHAN_INPUT_WAIT_DRAIN
) {
2054 fatal("cannot happen: istate == INPUT_WAIT_DRAIN for proto 1.3");
2056 * input-buffer is empty and read-socket shutdown:
2057 * tell peer, that we will not send more data: send IEOF.
2058 * hack for extended data: delay EOF if EFD still in use.
2060 if (CHANNEL_EFD_INPUT_ACTIVE(c
))
2061 debug2("channel %d: ibuf_empty delayed efd %d/(%d)",
2062 c
->self
, c
->efd
, buffer_len(&c
->extended
));
2066 /* Send extended data, i.e. stderr */
2068 !(c
->flags
& CHAN_EOF_SENT
) &&
2069 c
->remote_window
> 0 &&
2070 (len
= buffer_len(&c
->extended
)) > 0 &&
2071 c
->extended_usage
== CHAN_EXTENDED_READ
) {
2072 debug2("channel %d: rwin %u elen %u euse %d",
2073 c
->self
, c
->remote_window
, buffer_len(&c
->extended
),
2075 if (len
> c
->remote_window
)
2076 len
= c
->remote_window
;
2077 if (len
> c
->remote_maxpacket
)
2078 len
= c
->remote_maxpacket
;
2079 packet_start(SSH2_MSG_CHANNEL_EXTENDED_DATA
);
2080 packet_put_int(c
->remote_id
);
2081 packet_put_int(SSH2_EXTENDED_DATA_STDERR
);
2082 packet_put_string(buffer_ptr(&c
->extended
), len
);
2084 buffer_consume(&c
->extended
, len
);
2085 c
->remote_window
-= len
;
2086 debug2("channel %d: sent ext data %d", c
->self
, len
);
2092 /* -- protocol input */
2096 channel_input_data(int type
, u_int32_t seq
, void *ctxt
)
2103 /* Get the channel number and verify it. */
2104 id
= packet_get_int();
2105 c
= channel_lookup(id
);
2107 packet_disconnect("Received data for nonexistent channel %d.", id
);
2109 /* Ignore any data for non-open channels (might happen on close) */
2110 if (c
->type
!= SSH_CHANNEL_OPEN
&&
2111 c
->type
!= SSH_CHANNEL_X11_OPEN
)
2115 data
= packet_get_string_ptr(&data_len
);
2118 * Ignore data for protocol > 1.3 if output end is no longer open.
2119 * For protocol 2 the sending side is reducing its window as it sends
2120 * data, so we must 'fake' consumption of the data in order to ensure
2121 * that window updates are sent back. Otherwise the connection might
2124 if (!compat13
&& c
->ostate
!= CHAN_OUTPUT_OPEN
) {
2126 c
->local_window
-= data_len
;
2127 c
->local_consumed
+= data_len
;
2133 if (data_len
> c
->local_maxpacket
) {
2134 logit("channel %d: rcvd big packet %d, maxpack %d",
2135 c
->self
, data_len
, c
->local_maxpacket
);
2137 if (data_len
> c
->local_window
) {
2138 logit("channel %d: rcvd too much data %d, win %d",
2139 c
->self
, data_len
, c
->local_window
);
2142 c
->local_window
-= data_len
;
2145 buffer_put_string(&c
->output
, data
, data_len
);
2147 buffer_append(&c
->output
, data
, data_len
);
2153 channel_input_extended_data(int type
, u_int32_t seq
, void *ctxt
)
2157 u_int data_len
, tcode
;
2160 /* Get the channel number and verify it. */
2161 id
= packet_get_int();
2162 c
= channel_lookup(id
);
2165 packet_disconnect("Received extended_data for bad channel %d.", id
);
2166 if (c
->type
!= SSH_CHANNEL_OPEN
) {
2167 logit("channel %d: ext data for non open", id
);
2170 if (c
->flags
& CHAN_EOF_RCVD
) {
2171 if (datafellows
& SSH_BUG_EXTEOF
)
2172 debug("channel %d: accepting ext data after eof", id
);
2174 packet_disconnect("Received extended_data after EOF "
2175 "on channel %d.", id
);
2177 tcode
= packet_get_int();
2179 c
->extended_usage
!= CHAN_EXTENDED_WRITE
||
2180 tcode
!= SSH2_EXTENDED_DATA_STDERR
) {
2181 logit("channel %d: bad ext data", c
->self
);
2184 data
= packet_get_string(&data_len
);
2186 if (data_len
> c
->local_window
) {
2187 logit("channel %d: rcvd too much extended_data %d, win %d",
2188 c
->self
, data_len
, c
->local_window
);
2192 debug2("channel %d: rcvd ext data %d", c
->self
, data_len
);
2193 c
->local_window
-= data_len
;
2194 buffer_append(&c
->extended
, data
, data_len
);
2200 channel_input_ieof(int type
, u_int32_t seq
, void *ctxt
)
2205 id
= packet_get_int();
2207 c
= channel_lookup(id
);
2209 packet_disconnect("Received ieof for nonexistent channel %d.", id
);
2212 /* XXX force input close */
2213 if (c
->force_drain
&& c
->istate
== CHAN_INPUT_OPEN
) {
2214 debug("channel %d: FORCE input drain", c
->self
);
2215 c
->istate
= CHAN_INPUT_WAIT_DRAIN
;
2216 if (buffer_len(&c
->input
) == 0)
2224 channel_input_close(int type
, u_int32_t seq
, void *ctxt
)
2229 id
= packet_get_int();
2231 c
= channel_lookup(id
);
2233 packet_disconnect("Received close for nonexistent channel %d.", id
);
2236 * Send a confirmation that we have closed the channel and no more
2237 * data is coming for it.
2239 packet_start(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION
);
2240 packet_put_int(c
->remote_id
);
2244 * If the channel is in closed state, we have sent a close request,
2245 * and the other side will eventually respond with a confirmation.
2246 * Thus, we cannot free the channel here, because then there would be
2247 * no-one to receive the confirmation. The channel gets freed when
2248 * the confirmation arrives.
2250 if (c
->type
!= SSH_CHANNEL_CLOSED
) {
2252 * Not a closed channel - mark it as draining, which will
2253 * cause it to be freed later.
2255 buffer_clear(&c
->input
);
2256 c
->type
= SSH_CHANNEL_OUTPUT_DRAINING
;
2260 /* proto version 1.5 overloads CLOSE_CONFIRMATION with OCLOSE */
2263 channel_input_oclose(int type
, u_int32_t seq
, void *ctxt
)
2265 int id
= packet_get_int();
2266 Channel
*c
= channel_lookup(id
);
2270 packet_disconnect("Received oclose for nonexistent channel %d.", id
);
2271 chan_rcvd_oclose(c
);
2276 channel_input_close_confirmation(int type
, u_int32_t seq
, void *ctxt
)
2278 int id
= packet_get_int();
2279 Channel
*c
= channel_lookup(id
);
2283 packet_disconnect("Received close confirmation for "
2284 "out-of-range channel %d.", id
);
2285 if (c
->type
!= SSH_CHANNEL_CLOSED
)
2286 packet_disconnect("Received close confirmation for "
2287 "non-closed channel %d (type %d).", id
, c
->type
);
2293 channel_input_open_confirmation(int type
, u_int32_t seq
, void *ctxt
)
2298 id
= packet_get_int();
2299 c
= channel_lookup(id
);
2301 if (c
==NULL
|| c
->type
!= SSH_CHANNEL_OPENING
)
2302 packet_disconnect("Received open confirmation for "
2303 "non-opening channel %d.", id
);
2304 remote_id
= packet_get_int();
2305 /* Record the remote channel number and mark that the channel is now open. */
2306 c
->remote_id
= remote_id
;
2307 c
->type
= SSH_CHANNEL_OPEN
;
2310 c
->remote_window
= packet_get_int();
2311 c
->remote_maxpacket
= packet_get_int();
2312 if (c
->open_confirm
) {
2313 debug2("callback start");
2314 c
->open_confirm(c
->self
, c
->open_confirm_ctx
);
2315 debug2("callback done");
2317 debug2("channel %d: open confirm rwindow %u rmax %u", c
->self
,
2318 c
->remote_window
, c
->remote_maxpacket
);
2324 reason2txt(int reason
)
2327 case SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED
:
2328 return "administratively prohibited";
2329 case SSH2_OPEN_CONNECT_FAILED
:
2330 return "connect failed";
2331 case SSH2_OPEN_UNKNOWN_CHANNEL_TYPE
:
2332 return "unknown channel type";
2333 case SSH2_OPEN_RESOURCE_SHORTAGE
:
2334 return "resource shortage";
2336 return "unknown reason";
2341 channel_input_open_failure(int type
, u_int32_t seq
, void *ctxt
)
2344 char *msg
= NULL
, *lang
= NULL
;
2347 id
= packet_get_int();
2348 c
= channel_lookup(id
);
2350 if (c
==NULL
|| c
->type
!= SSH_CHANNEL_OPENING
)
2351 packet_disconnect("Received open failure for "
2352 "non-opening channel %d.", id
);
2354 reason
= packet_get_int();
2355 if (!(datafellows
& SSH_BUG_OPENFAILURE
)) {
2356 msg
= packet_get_string(NULL
);
2357 lang
= packet_get_string(NULL
);
2359 logit("channel %d: open failed: %s%s%s", id
,
2360 reason2txt(reason
), msg
? ": ": "", msg
? msg
: "");
2367 /* Schedule the channel for cleanup/deletion. */
2373 channel_input_window_adjust(int type
, u_int32_t seq
, void *ctxt
)
2382 /* Get the channel number and verify it. */
2383 id
= packet_get_int();
2384 c
= channel_lookup(id
);
2387 logit("Received window adjust for non-open channel %d.", id
);
2390 adjust
= packet_get_int();
2392 debug2("channel %d: rcvd adjust %u", id
, adjust
);
2393 c
->remote_window
+= adjust
;
2398 channel_input_port_open(int type
, u_int32_t seq
, void *ctxt
)
2402 char *host
, *originator_string
;
2405 remote_id
= packet_get_int();
2406 host
= packet_get_string(NULL
);
2407 host_port
= packet_get_int();
2409 if (packet_get_protocol_flags() & SSH_PROTOFLAG_HOST_IN_FWD_OPEN
) {
2410 originator_string
= packet_get_string(NULL
);
2412 originator_string
= xstrdup("unknown (remote did not supply name)");
2415 c
= channel_connect_to(host
, host_port
,
2416 "connected socket", originator_string
);
2417 xfree(originator_string
);
2420 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE
);
2421 packet_put_int(remote_id
);
2424 c
->remote_id
= remote_id
;
2429 channel_input_status_confirm(int type
, u_int32_t seq
, void *ctxt
)
2432 struct channel_confirm
*cc
;
2435 /* Reset keepalive timeout */
2436 packet_set_alive_timeouts(0);
2438 id
= packet_get_int();
2441 debug2("channel_input_status_confirm: type %d id %d", type
, id
);
2443 if ((c
= channel_lookup(id
)) == NULL
) {
2444 logit("channel_input_status_confirm: %d: unknown", id
);
2448 if ((cc
= TAILQ_FIRST(&c
->status_confirms
)) == NULL
)
2450 cc
->cb(type
, c
, cc
->ctx
);
2451 TAILQ_REMOVE(&c
->status_confirms
, cc
, entry
);
2452 bzero(cc
, sizeof(*cc
));
2456 /* -- tcp forwarding */
2459 channel_set_af(int af
)
2465 channel_setup_fwd_listener(int type
, const char *listen_addr
,
2466 u_short listen_port
, int *allocated_listen_port
,
2467 const char *host_to_connect
, u_short port_to_connect
, int gateway_ports
)
2470 int sock
, r
, success
= 0, wildcard
= 0, is_client
;
2471 struct addrinfo hints
, *ai
, *aitop
;
2472 const char *host
, *addr
;
2473 char ntop
[NI_MAXHOST
], strport
[NI_MAXSERV
];
2476 host
= (type
== SSH_CHANNEL_RPORT_LISTENER
) ?
2477 listen_addr
: host_to_connect
;
2478 is_client
= (type
== SSH_CHANNEL_PORT_LISTENER
);
2481 error("No forward host name.");
2484 if (strlen(host
) >= NI_MAXHOST
) {
2485 error("Forward host name too long.");
2490 * Determine whether or not a port forward listens to loopback,
2491 * specified address or wildcard. On the client, a specified bind
2492 * address will always override gateway_ports. On the server, a
2493 * gateway_ports of 1 (``yes'') will override the client's
2494 * specification and force a wildcard bind, whereas a value of 2
2495 * (``clientspecified'') will bind to whatever address the client
2498 * Special-case listen_addrs are:
2500 * "0.0.0.0" -> wildcard v4/v6 if SSH_OLD_FORWARD_ADDR
2501 * "" (empty string), "*" -> wildcard v4/v6
2502 * "localhost" -> loopback v4/v6
2505 if (listen_addr
== NULL
) {
2506 /* No address specified: default to gateway_ports setting */
2509 } else if (gateway_ports
|| is_client
) {
2510 if (((datafellows
& SSH_OLD_FORWARD_ADDR
) &&
2511 strcmp(listen_addr
, "0.0.0.0") == 0 && is_client
== 0) ||
2512 *listen_addr
== '\0' || strcmp(listen_addr
, "*") == 0 ||
2513 (!is_client
&& gateway_ports
== 1))
2515 else if (strcmp(listen_addr
, "localhost") != 0)
2519 debug3("channel_setup_fwd_listener: type %d wildcard %d addr %s",
2520 type
, wildcard
, (addr
== NULL
) ? "NULL" : addr
);
2523 * getaddrinfo returns a loopback address if the hostname is
2524 * set to NULL and hints.ai_flags is not AI_PASSIVE
2526 memset(&hints
, 0, sizeof(hints
));
2527 hints
.ai_family
= IPv4or6
;
2528 hints
.ai_flags
= wildcard
? AI_PASSIVE
: 0;
2529 hints
.ai_socktype
= SOCK_STREAM
;
2530 snprintf(strport
, sizeof strport
, "%d", listen_port
);
2531 if ((r
= getaddrinfo(addr
, strport
, &hints
, &aitop
)) != 0) {
2533 /* This really shouldn't happen */
2534 packet_disconnect("getaddrinfo: fatal error: %s",
2535 ssh_gai_strerror(r
));
2537 error("channel_setup_fwd_listener: "
2538 "getaddrinfo(%.64s): %s", addr
,
2539 ssh_gai_strerror(r
));
2543 if (allocated_listen_port
!= NULL
)
2544 *allocated_listen_port
= 0;
2545 for (ai
= aitop
; ai
; ai
= ai
->ai_next
) {
2546 switch (ai
->ai_family
) {
2548 lport_p
= &((struct sockaddr_in
*)ai
->ai_addr
)->
2552 lport_p
= &((struct sockaddr_in6
*)ai
->ai_addr
)->
2559 * If allocating a port for -R forwards, then use the
2560 * same port for all address families.
2562 if (type
== SSH_CHANNEL_RPORT_LISTENER
&& listen_port
== 0 &&
2563 allocated_listen_port
!= NULL
&& *allocated_listen_port
> 0)
2564 *lport_p
= htons(*allocated_listen_port
);
2566 if (getnameinfo(ai
->ai_addr
, ai
->ai_addrlen
, ntop
, sizeof(ntop
),
2567 strport
, sizeof(strport
), NI_NUMERICHOST
|NI_NUMERICSERV
) != 0) {
2568 error("channel_setup_fwd_listener: getnameinfo failed");
2571 /* Create a port to listen for the host. */
2572 sock
= socket(ai
->ai_family
, ai
->ai_socktype
, ai
->ai_protocol
);
2574 /* this is no error since kernel may not support ipv6 */
2575 verbose("socket: %.100s", strerror(errno
));
2579 channel_set_reuseaddr(sock
);
2581 debug("Local forwarding listening on %s port %s.",
2584 /* Bind the socket to the address. */
2585 if (bind(sock
, ai
->ai_addr
, ai
->ai_addrlen
) < 0) {
2586 /* address can be in use ipv6 address is already bound */
2588 error("bind: %.100s", strerror(errno
));
2590 verbose("bind: %.100s", strerror(errno
));
2595 /* Start listening for connections on the socket. */
2596 if (listen(sock
, SSH_LISTEN_BACKLOG
) < 0) {
2597 error("listen: %.100s", strerror(errno
));
2603 * listen_port == 0 requests a dynamically allocated port -
2604 * record what we got.
2606 if (type
== SSH_CHANNEL_RPORT_LISTENER
&& listen_port
== 0 &&
2607 allocated_listen_port
!= NULL
&&
2608 *allocated_listen_port
== 0) {
2609 *allocated_listen_port
= get_sock_port(sock
, 1);
2610 debug("Allocated listen port %d",
2611 *allocated_listen_port
);
2614 /* Allocate a channel number for the socket. */
2615 c
= channel_new("port listener", type
, sock
, sock
, -1,
2616 CHAN_TCP_WINDOW_DEFAULT
, CHAN_TCP_PACKET_DEFAULT
,
2617 0, "port listener", 1);
2618 c
->path
= xstrdup(host
);
2619 c
->host_port
= port_to_connect
;
2620 c
->listening_port
= listen_port
;
2624 error("channel_setup_fwd_listener: cannot listen to port: %d",
2626 freeaddrinfo(aitop
);
2631 channel_cancel_rport_listener(const char *host
, u_short port
)
2636 for (i
= 0; i
< channels_alloc
; i
++) {
2637 Channel
*c
= channels
[i
];
2639 if (c
!= NULL
&& c
->type
== SSH_CHANNEL_RPORT_LISTENER
&&
2640 strcmp(c
->path
, host
) == 0 && c
->listening_port
== port
) {
2641 debug2("%s: close channel %d", __func__
, i
);
2650 /* protocol local port fwd, used by ssh (and sshd in v1) */
2652 channel_setup_local_fwd_listener(const char *listen_host
, u_short listen_port
,
2653 const char *host_to_connect
, u_short port_to_connect
, int gateway_ports
)
2655 return channel_setup_fwd_listener(SSH_CHANNEL_PORT_LISTENER
,
2656 listen_host
, listen_port
, NULL
, host_to_connect
, port_to_connect
,
2660 /* protocol v2 remote port fwd, used by sshd */
2662 channel_setup_remote_fwd_listener(const char *listen_address
,
2663 u_short listen_port
, int *allocated_listen_port
, int gateway_ports
)
2665 return channel_setup_fwd_listener(SSH_CHANNEL_RPORT_LISTENER
,
2666 listen_address
, listen_port
, allocated_listen_port
,
2667 NULL
, 0, gateway_ports
);
2671 * Initiate forwarding of connections to port "port" on remote host through
2672 * the secure channel to host:port from local side.
2676 channel_request_remote_forwarding(const char *listen_host
, u_short listen_port
,
2677 const char *host_to_connect
, u_short port_to_connect
)
2679 int type
, success
= 0;
2681 /* Record locally that connection to this host/port is permitted. */
2682 if (num_permitted_opens
>= SSH_MAX_FORWARDS_PER_DIRECTION
)
2683 fatal("channel_request_remote_forwarding: too many forwards");
2685 /* Send the forward request to the remote side. */
2687 const char *address_to_bind
;
2688 if (listen_host
== NULL
) {
2689 if (datafellows
& SSH_BUG_RFWD_ADDR
)
2690 address_to_bind
= "127.0.0.1";
2692 address_to_bind
= "localhost";
2693 } else if (*listen_host
== '\0' ||
2694 strcmp(listen_host
, "*") == 0) {
2695 if (datafellows
& SSH_BUG_RFWD_ADDR
)
2696 address_to_bind
= "0.0.0.0";
2698 address_to_bind
= "";
2700 address_to_bind
= listen_host
;
2702 packet_start(SSH2_MSG_GLOBAL_REQUEST
);
2703 packet_put_cstring("tcpip-forward");
2704 packet_put_char(1); /* boolean: want reply */
2705 packet_put_cstring(address_to_bind
);
2706 packet_put_int(listen_port
);
2708 packet_write_wait();
2709 /* Assume that server accepts the request */
2712 packet_start(SSH_CMSG_PORT_FORWARD_REQUEST
);
2713 packet_put_int(listen_port
);
2714 packet_put_cstring(host_to_connect
);
2715 packet_put_int(port_to_connect
);
2717 packet_write_wait();
2719 /* Wait for response from the remote side. */
2720 type
= packet_read();
2722 case SSH_SMSG_SUCCESS
:
2725 case SSH_SMSG_FAILURE
:
2728 /* Unknown packet */
2729 packet_disconnect("Protocol error for port forward request:"
2730 "received packet type %d.", type
);
2734 permitted_opens
[num_permitted_opens
].host_to_connect
= xstrdup(host_to_connect
);
2735 permitted_opens
[num_permitted_opens
].port_to_connect
= port_to_connect
;
2736 permitted_opens
[num_permitted_opens
].listen_port
= listen_port
;
2737 num_permitted_opens
++;
2739 return (success
? 0 : -1);
2743 * Request cancellation of remote forwarding of connection host:port from
2747 channel_request_rforward_cancel(const char *host
, u_short port
)
2754 for (i
= 0; i
< num_permitted_opens
; i
++) {
2755 if (permitted_opens
[i
].host_to_connect
!= NULL
&&
2756 permitted_opens
[i
].listen_port
== port
)
2759 if (i
>= num_permitted_opens
) {
2760 debug("%s: requested forward not found", __func__
);
2763 packet_start(SSH2_MSG_GLOBAL_REQUEST
);
2764 packet_put_cstring("cancel-tcpip-forward");
2766 packet_put_cstring(host
== NULL
? "" : host
);
2767 packet_put_int(port
);
2770 permitted_opens
[i
].listen_port
= 0;
2771 permitted_opens
[i
].port_to_connect
= 0;
2772 xfree(permitted_opens
[i
].host_to_connect
);
2773 permitted_opens
[i
].host_to_connect
= NULL
;
2777 * This is called after receiving CHANNEL_FORWARDING_REQUEST. This initates
2778 * listening for the port, and sends back a success reply (or disconnect
2779 * message if there was an error).
2782 channel_input_port_forward_request(int is_root
, int gateway_ports
)
2784 u_short port
, host_port
;
2788 /* Get arguments from the packet. */
2789 port
= packet_get_int();
2790 hostname
= packet_get_string(NULL
);
2791 host_port
= packet_get_int();
2795 * Check that an unprivileged user is not trying to forward a
2798 if (port
< IPPORT_RESERVED
&& !is_root
)
2800 "Requested forwarding of port %d but user is not root.",
2803 packet_disconnect("Dynamic forwarding denied.");
2806 /* Initiate forwarding */
2807 success
= channel_setup_local_fwd_listener(NULL
, port
, hostname
,
2808 host_port
, gateway_ports
);
2810 /* Free the argument string. */
2813 return (success
? 0 : -1);
2817 * Permits opening to any host/port if permitted_opens[] is empty. This is
2818 * usually called by the server, because the user could connect to any port
2819 * anyway, and the server has no way to know but to trust the client anyway.
2822 channel_permit_all_opens(void)
2824 if (num_permitted_opens
== 0)
2825 all_opens_permitted
= 1;
2829 channel_add_permitted_opens(char *host
, int port
)
2831 if (num_permitted_opens
>= SSH_MAX_FORWARDS_PER_DIRECTION
)
2832 fatal("channel_add_permitted_opens: too many forwards");
2833 debug("allow port forwarding to host %s port %d", host
, port
);
2835 permitted_opens
[num_permitted_opens
].host_to_connect
= xstrdup(host
);
2836 permitted_opens
[num_permitted_opens
].port_to_connect
= port
;
2837 num_permitted_opens
++;
2839 all_opens_permitted
= 0;
2843 channel_add_adm_permitted_opens(char *host
, int port
)
2845 if (num_adm_permitted_opens
>= SSH_MAX_FORWARDS_PER_DIRECTION
)
2846 fatal("channel_add_adm_permitted_opens: too many forwards");
2847 debug("config allows port forwarding to host %s port %d", host
, port
);
2849 permitted_adm_opens
[num_adm_permitted_opens
].host_to_connect
2851 permitted_adm_opens
[num_adm_permitted_opens
].port_to_connect
= port
;
2852 return ++num_adm_permitted_opens
;
2856 channel_clear_permitted_opens(void)
2860 for (i
= 0; i
< num_permitted_opens
; i
++)
2861 if (permitted_opens
[i
].host_to_connect
!= NULL
)
2862 xfree(permitted_opens
[i
].host_to_connect
);
2863 num_permitted_opens
= 0;
2867 channel_clear_adm_permitted_opens(void)
2871 for (i
= 0; i
< num_adm_permitted_opens
; i
++)
2872 if (permitted_adm_opens
[i
].host_to_connect
!= NULL
)
2873 xfree(permitted_adm_opens
[i
].host_to_connect
);
2874 num_adm_permitted_opens
= 0;
2878 channel_print_adm_permitted_opens(void)
2882 printf("permitopen");
2883 if (num_adm_permitted_opens
== 0) {
2887 for (i
= 0; i
< num_adm_permitted_opens
; i
++)
2888 if (permitted_adm_opens
[i
].host_to_connect
!= NULL
)
2889 printf(" %s:%d", permitted_adm_opens
[i
].host_to_connect
,
2890 permitted_adm_opens
[i
].port_to_connect
);
2894 /* Try to start non-blocking connect to next host in cctx list */
2896 connect_next(struct channel_connect
*cctx
)
2898 int sock
, saved_errno
;
2899 char ntop
[NI_MAXHOST
], strport
[NI_MAXSERV
];
2901 for (; cctx
->ai
; cctx
->ai
= cctx
->ai
->ai_next
) {
2902 if (cctx
->ai
->ai_family
!= AF_INET
&&
2903 cctx
->ai
->ai_family
!= AF_INET6
)
2905 if (getnameinfo(cctx
->ai
->ai_addr
, cctx
->ai
->ai_addrlen
,
2906 ntop
, sizeof(ntop
), strport
, sizeof(strport
),
2907 NI_NUMERICHOST
|NI_NUMERICSERV
) != 0) {
2908 error("connect_next: getnameinfo failed");
2911 if ((sock
= socket(cctx
->ai
->ai_family
, cctx
->ai
->ai_socktype
,
2912 cctx
->ai
->ai_protocol
)) == -1) {
2913 if (cctx
->ai
->ai_next
== NULL
)
2914 error("socket: %.100s", strerror(errno
));
2916 verbose("socket: %.100s", strerror(errno
));
2919 if (set_nonblock(sock
) == -1)
2920 fatal("%s: set_nonblock(%d)", __func__
, sock
);
2921 if (connect(sock
, cctx
->ai
->ai_addr
,
2922 cctx
->ai
->ai_addrlen
) == -1 && errno
!= EINPROGRESS
) {
2923 debug("connect_next: host %.100s ([%.100s]:%s): "
2924 "%.100s", cctx
->host
, ntop
, strport
,
2926 saved_errno
= errno
;
2928 errno
= saved_errno
;
2929 continue; /* fail -- try next */
2931 debug("connect_next: host %.100s ([%.100s]:%s) "
2932 "in progress, fd=%d", cctx
->host
, ntop
, strport
, sock
);
2933 cctx
->ai
= cctx
->ai
->ai_next
;
2941 channel_connect_ctx_free(struct channel_connect
*cctx
)
2945 freeaddrinfo(cctx
->aitop
);
2946 bzero(cctx
, sizeof(*cctx
));
2948 cctx
->ai
= cctx
->aitop
= NULL
;
2951 /* Return CONNECTING channel to remote host, port */
2953 connect_to(const char *host
, u_short port
, char *ctype
, char *rname
)
2955 struct addrinfo hints
;
2958 char strport
[NI_MAXSERV
];
2959 struct channel_connect cctx
;
2962 memset(&cctx
, 0, sizeof(cctx
));
2963 memset(&hints
, 0, sizeof(hints
));
2964 hints
.ai_family
= IPv4or6
;
2965 hints
.ai_socktype
= SOCK_STREAM
;
2966 snprintf(strport
, sizeof strport
, "%d", port
);
2967 if ((gaierr
= getaddrinfo(host
, strport
, &hints
, &cctx
.aitop
)) != 0) {
2968 error("connect_to %.100s: unknown host (%s)", host
,
2969 ssh_gai_strerror(gaierr
));
2973 cctx
.host
= xstrdup(host
);
2975 cctx
.ai
= cctx
.aitop
;
2977 if ((sock
= connect_next(&cctx
)) == -1) {
2978 error("connect to %.100s port %d failed: %s",
2979 host
, port
, strerror(errno
));
2980 channel_connect_ctx_free(&cctx
);
2983 c
= channel_new(ctype
, SSH_CHANNEL_CONNECTING
, sock
, sock
, -1,
2984 CHAN_TCP_WINDOW_DEFAULT
, CHAN_TCP_PACKET_DEFAULT
, 0, rname
, 1);
2985 c
->connect_ctx
= cctx
;
2990 channel_connect_by_listen_address(u_short listen_port
, char *ctype
, char *rname
)
2994 for (i
= 0; i
< num_permitted_opens
; i
++) {
2995 if (permitted_opens
[i
].host_to_connect
!= NULL
&&
2996 permitted_opens
[i
].listen_port
== listen_port
) {
2998 permitted_opens
[i
].host_to_connect
,
2999 permitted_opens
[i
].port_to_connect
, ctype
, rname
);
3002 error("WARNING: Server requests forwarding for unknown listen_port %d",
3007 /* Check if connecting to that port is permitted and connect. */
3009 channel_connect_to(const char *host
, u_short port
, char *ctype
, char *rname
)
3011 int i
, permit
, permit_adm
= 1;
3013 permit
= all_opens_permitted
;
3015 for (i
= 0; i
< num_permitted_opens
; i
++)
3016 if (permitted_opens
[i
].host_to_connect
!= NULL
&&
3017 permitted_opens
[i
].port_to_connect
== port
&&
3018 strcmp(permitted_opens
[i
].host_to_connect
, host
) == 0)
3022 if (num_adm_permitted_opens
> 0) {
3024 for (i
= 0; i
< num_adm_permitted_opens
; i
++)
3025 if (permitted_adm_opens
[i
].host_to_connect
!= NULL
&&
3026 permitted_adm_opens
[i
].port_to_connect
== port
&&
3027 strcmp(permitted_adm_opens
[i
].host_to_connect
, host
)
3032 if (!permit
|| !permit_adm
) {
3033 logit("Received request to connect to host %.100s port %d, "
3034 "but the request was denied.", host
, port
);
3037 return connect_to(host
, port
, ctype
, rname
);
3041 channel_send_window_changes(void)
3046 for (i
= 0; i
< channels_alloc
; i
++) {
3047 if (channels
[i
] == NULL
|| !channels
[i
]->client_tty
||
3048 channels
[i
]->type
!= SSH_CHANNEL_OPEN
)
3050 if (ioctl(channels
[i
]->rfd
, TIOCGWINSZ
, &ws
) < 0)
3052 channel_request_start(i
, "window-change", 0);
3053 packet_put_int((u_int
)ws
.ws_col
);
3054 packet_put_int((u_int
)ws
.ws_row
);
3055 packet_put_int((u_int
)ws
.ws_xpixel
);
3056 packet_put_int((u_int
)ws
.ws_ypixel
);
3061 /* -- X11 forwarding */
3064 * Creates an internet domain socket for listening for X11 connections.
3065 * Returns 0 and a suitable display number for the DISPLAY variable
3066 * stored in display_numberp , or -1 if an error occurs.
3069 x11_create_display_inet(int x11_display_offset
, int x11_use_localhost
,
3070 int single_connection
, u_int
*display_numberp
, int **chanids
)
3073 int display_number
, sock
;
3075 struct addrinfo hints
, *ai
, *aitop
;
3076 char strport
[NI_MAXSERV
];
3077 int gaierr
, n
, num_socks
= 0, socks
[NUM_SOCKS
];
3079 if (chanids
== NULL
)
3082 for (display_number
= x11_display_offset
;
3083 display_number
< MAX_DISPLAYS
;
3085 port
= 6000 + display_number
;
3086 memset(&hints
, 0, sizeof(hints
));
3087 hints
.ai_family
= IPv4or6
;
3088 hints
.ai_flags
= x11_use_localhost
? 0: AI_PASSIVE
;
3089 hints
.ai_socktype
= SOCK_STREAM
;
3090 snprintf(strport
, sizeof strport
, "%d", port
);
3091 if ((gaierr
= getaddrinfo(NULL
, strport
, &hints
, &aitop
)) != 0) {
3092 error("getaddrinfo: %.100s", ssh_gai_strerror(gaierr
));
3095 for (ai
= aitop
; ai
; ai
= ai
->ai_next
) {
3096 if (ai
->ai_family
!= AF_INET
&& ai
->ai_family
!= AF_INET6
)
3098 sock
= socket(ai
->ai_family
, ai
->ai_socktype
,
3101 if ((errno
!= EINVAL
) && (errno
!= EAFNOSUPPORT
)) {
3102 error("socket: %.100s", strerror(errno
));
3103 freeaddrinfo(aitop
);
3106 debug("x11_create_display_inet: Socket family %d not supported",
3112 if (ai
->ai_family
== AF_INET6
) {
3114 if (setsockopt(sock
, IPPROTO_IPV6
, IPV6_V6ONLY
, &on
, sizeof(on
)) < 0)
3115 error("setsockopt IPV6_V6ONLY: %.100s", strerror(errno
));
3118 if (x11_use_localhost
)
3119 channel_set_reuseaddr(sock
);
3120 if (bind(sock
, ai
->ai_addr
, ai
->ai_addrlen
) < 0) {
3121 debug2("bind port %d: %.100s", port
, strerror(errno
));
3124 for (n
= 0; n
< num_socks
; n
++) {
3130 socks
[num_socks
++] = sock
;
3131 if (num_socks
== NUM_SOCKS
)
3134 freeaddrinfo(aitop
);
3138 if (display_number
>= MAX_DISPLAYS
) {
3139 error("Failed to allocate internet-domain X11 display socket.");
3142 /* Start listening for connections on the socket. */
3143 for (n
= 0; n
< num_socks
; n
++) {
3145 if (listen(sock
, SSH_LISTEN_BACKLOG
) < 0) {
3146 error("listen: %.100s", strerror(errno
));
3152 /* Allocate a channel for each socket. */
3153 *chanids
= xcalloc(num_socks
+ 1, sizeof(**chanids
));
3154 for (n
= 0; n
< num_socks
; n
++) {
3156 nc
= channel_new("x11 listener",
3157 SSH_CHANNEL_X11_LISTENER
, sock
, sock
, -1,
3158 CHAN_X11_WINDOW_DEFAULT
, CHAN_X11_PACKET_DEFAULT
,
3159 0, "X11 inet listener", 1);
3160 nc
->single_connection
= single_connection
;
3161 (*chanids
)[n
] = nc
->self
;
3165 /* Return the display number for the DISPLAY environment variable. */
3166 *display_numberp
= display_number
;
3171 connect_local_xsocket_path(const char *pathname
)
3174 struct sockaddr_un addr
;
3176 sock
= socket(AF_UNIX
, SOCK_STREAM
, 0);
3178 error("socket: %.100s", strerror(errno
));
3179 memset(&addr
, 0, sizeof(addr
));
3180 addr
.sun_family
= AF_UNIX
;
3181 strlcpy(addr
.sun_path
, pathname
, sizeof addr
.sun_path
);
3182 if (connect(sock
, (struct sockaddr
*)&addr
, sizeof(addr
)) == 0)
3185 error("connect %.100s: %.100s", addr
.sun_path
, strerror(errno
));
3190 connect_local_xsocket(u_int dnr
)
3193 snprintf(buf
, sizeof buf
, _PATH_UNIX_X
, dnr
);
3194 return connect_local_xsocket_path(buf
);
3198 x11_connect_display(void)
3200 u_int display_number
;
3201 const char *display
;
3202 char buf
[1024], *cp
;
3203 struct addrinfo hints
, *ai
, *aitop
;
3204 char strport
[NI_MAXSERV
];
3205 int gaierr
, sock
= 0;
3207 /* Try to open a socket for the local X server. */
3208 display
= getenv("DISPLAY");
3210 error("DISPLAY not set.");
3214 * Now we decode the value of the DISPLAY variable and make a
3215 * connection to the real X server.
3218 /* Check if the display is from launchd. */
3220 if (strncmp(display
, "/tmp/launch", 11) == 0) {
3221 sock
= connect_local_xsocket_path(display
);
3225 /* OK, we now have a connection to the display. */
3230 * Check if it is a unix domain socket. Unix domain displays are in
3231 * one of the following formats: unix:d[.s], :d[.s], ::d[.s]
3233 if (strncmp(display
, "unix:", 5) == 0 ||
3234 display
[0] == ':') {
3235 /* Connect to the unix domain socket. */
3236 if (sscanf(strrchr(display
, ':') + 1, "%u", &display_number
) != 1) {
3237 error("Could not parse display number from DISPLAY: %.100s",
3241 /* Create a socket. */
3242 sock
= connect_local_xsocket(display_number
);
3246 /* OK, we now have a connection to the display. */
3250 * Connect to an inet socket. The DISPLAY value is supposedly
3251 * hostname:d[.s], where hostname may also be numeric IP address.
3253 strlcpy(buf
, display
, sizeof(buf
));
3254 cp
= strchr(buf
, ':');
3256 error("Could not find ':' in DISPLAY: %.100s", display
);
3260 /* buf now contains the host name. But first we parse the display number. */
3261 if (sscanf(cp
+ 1, "%u", &display_number
) != 1) {
3262 error("Could not parse display number from DISPLAY: %.100s",
3267 /* Look up the host address */
3268 memset(&hints
, 0, sizeof(hints
));
3269 hints
.ai_family
= IPv4or6
;
3270 hints
.ai_socktype
= SOCK_STREAM
;
3271 snprintf(strport
, sizeof strport
, "%u", 6000 + display_number
);
3272 if ((gaierr
= getaddrinfo(buf
, strport
, &hints
, &aitop
)) != 0) {
3273 error("%.100s: unknown host. (%s)", buf
,
3274 ssh_gai_strerror(gaierr
));
3277 for (ai
= aitop
; ai
; ai
= ai
->ai_next
) {
3278 /* Create a socket. */
3279 sock
= socket(ai
->ai_family
, ai
->ai_socktype
, ai
->ai_protocol
);
3281 debug2("socket: %.100s", strerror(errno
));
3284 /* Connect it to the display. */
3285 if (connect(sock
, ai
->ai_addr
, ai
->ai_addrlen
) < 0) {
3286 debug2("connect %.100s port %u: %.100s", buf
,
3287 6000 + display_number
, strerror(errno
));
3294 freeaddrinfo(aitop
);
3296 error("connect %.100s port %u: %.100s", buf
, 6000 + display_number
,
3305 * This is called when SSH_SMSG_X11_OPEN is received. The packet contains
3306 * the remote channel number. We should do whatever we want, and respond
3307 * with either SSH_MSG_OPEN_CONFIRMATION or SSH_MSG_OPEN_FAILURE.
3312 x11_input_open(int type
, u_int32_t seq
, void *ctxt
)
3315 int remote_id
, sock
= 0;
3318 debug("Received X11 open request.");
3320 remote_id
= packet_get_int();
3322 if (packet_get_protocol_flags() & SSH_PROTOFLAG_HOST_IN_FWD_OPEN
) {
3323 remote_host
= packet_get_string(NULL
);
3325 remote_host
= xstrdup("unknown (remote did not supply name)");
3329 /* Obtain a connection to the real X display. */
3330 sock
= x11_connect_display();
3332 /* Allocate a channel for this connection. */
3333 c
= channel_new("connected x11 socket",
3334 SSH_CHANNEL_X11_OPEN
, sock
, sock
, -1, 0, 0, 0,
3336 c
->remote_id
= remote_id
;
3341 /* Send refusal to the remote host. */
3342 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE
);
3343 packet_put_int(remote_id
);
3345 /* Send a confirmation to the remote host. */
3346 packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION
);
3347 packet_put_int(remote_id
);
3348 packet_put_int(c
->self
);
3353 /* dummy protocol handler that denies SSH-1 requests (agent/x11) */
3356 deny_input_open(int type
, u_int32_t seq
, void *ctxt
)
3358 int rchan
= packet_get_int();
3361 case SSH_SMSG_AGENT_OPEN
:
3362 error("Warning: ssh server tried agent forwarding.");
3364 case SSH_SMSG_X11_OPEN
:
3365 error("Warning: ssh server tried X11 forwarding.");
3368 error("deny_input_open: type %d", type
);
3371 error("Warning: this is probably a break-in attempt by a malicious server.");
3372 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE
);
3373 packet_put_int(rchan
);
3378 * Requests forwarding of X11 connections, generates fake authentication
3379 * data, and enables authentication spoofing.
3380 * This should be called in the client only.
3383 x11_request_forwarding_with_spoofing(int client_session_id
, const char *disp
,
3384 const char *proto
, const char *data
)
3386 u_int data_len
= (u_int
) strlen(data
) / 2;
3393 if (x11_saved_display
== NULL
)
3394 x11_saved_display
= xstrdup(disp
);
3395 else if (strcmp(disp
, x11_saved_display
) != 0) {
3396 error("x11_request_forwarding_with_spoofing: different "
3397 "$DISPLAY already forwarded");
3401 cp
= strchr(disp
, ':');
3403 cp
= strchr(cp
, '.');
3405 screen_number
= (u_int
)strtonum(cp
+ 1, 0, 400, NULL
);
3409 if (x11_saved_proto
== NULL
) {
3410 /* Save protocol name. */
3411 x11_saved_proto
= xstrdup(proto
);
3413 * Extract real authentication data and generate fake data
3414 * of the same length.
3416 x11_saved_data
= xmalloc(data_len
);
3417 x11_fake_data
= xmalloc(data_len
);
3418 for (i
= 0; i
< data_len
; i
++) {
3419 if (sscanf(data
+ 2 * i
, "%2x", &value
) != 1)
3420 fatal("x11_request_forwarding: bad "
3421 "authentication data: %.100s", data
);
3424 x11_saved_data
[i
] = value
;
3425 x11_fake_data
[i
] = rnd
& 0xff;
3428 x11_saved_data_len
= data_len
;
3429 x11_fake_data_len
= data_len
;
3432 /* Convert the fake data into hex. */
3433 new_data
= tohex(x11_fake_data
, data_len
);
3435 /* Send the request packet. */
3437 channel_request_start(client_session_id
, "x11-req", 0);
3438 packet_put_char(0); /* XXX bool single connection */
3440 packet_start(SSH_CMSG_X11_REQUEST_FORWARDING
);
3442 packet_put_cstring(proto
);
3443 packet_put_cstring(new_data
);
3444 packet_put_int(screen_number
);
3446 packet_write_wait();
3451 /* -- agent forwarding */
3453 /* Sends a message to the server to request authentication fd forwarding. */
3456 auth_request_forwarding(void)
3458 packet_start(SSH_CMSG_AGENT_REQUEST_FORWARDING
);
3460 packet_write_wait();