trunk/package/suse/external-dependencies/XML-Validator-Schema.spec

   1 #
   2 #   - XML::Validator::Schema -
   3 #   This spec file was automatically generated by cpan2rpm [ver: 2.027]
   4 #   The following arguments were used:
   5 #       --spec-only --version=1.08 '--author=Sam Tregar' XML-Validator-Schema-1.08.tar.gz
   6 #   For more information on cpan2rpm please visit: http://perl.arix.com/
   7 #
   8
   9 %define pkgname XML-Validator-Schema
  10 %define filelist %{pkgname}-%{version}-filelist
  11 %define NVR %{pkgname}-%{version}-%{release}
  12 %define maketest 1
  13
  14 name:      perl-XML-Validator-Schema
  15 summary:   XML-Validator-Schema - validate XML against a subset of W3C XML Schema
  16 version:   1.08
  17 release:   1
  18 vendor:    Sam Tregar
  19 packager:  Arix International <cpan2rpm@arix.com>
  20 license:   Artistic
  21 group:     Applications/CPAN
  22 url:       http://www.cpan.org
  23 buildroot: %{_tmppath}/%{name}-%{version}-%(id -u -n)
  24 buildarch: noarch
  25 prefix:    %(echo %{_prefix})
  26 source:    XML-Validator-Schema-1.08.tar.gz
  27
  28 %description
  29 This module allows you to validate XML documents against a W3C XML
  30 Schema.  This module does not implement the full W3C XML Schema
  31 recommendation (http://www.w3.org/XML/Schema), but a useful subset.
  32 See the SCHEMA SUPPORT section below.
  33
  34 IMPORTANT NOTE: To get line and column numbers in the error
  35 messages generated by this module you must install
  36 XML::Filter::ExceptionLocator and use
  37 XML::SAX::ExpatXS as your SAX parser.  This
  38 module is much more useful if you can tell where your errors are, so
  39 using these modules is highly recommeded!
  40
  41 #
  42 # This package was generated automatically with the cpan2rpm
  43 # utility.  To get this software or for more information
  44 # please visit: http://perl.arix.com/
  45 #
  46
  47 %prep
  48 %setup -q -n %{pkgname}-%{version}
  49 chmod -R u+w %{_builddir}/%{pkgname}-%{version}
  50
  51 %build
  52 grep -rsl '^#!.*perl' . |
  53 grep -v '.bak$' |xargs --no-run-if-empty \
  54 %__perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)'
  55 CFLAGS="$RPM_OPT_FLAGS"
  56 %{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq|PREFIX=%{buildroot}%{_prefix}| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '`
  57 %{__make}
  58 %if %maketest
  59 %{__make} test
  60 %endif
  61
  62 %install
  63 [ "%{buildroot}" != "/" ] && rm -rf %{buildroot}
  64
  65 %{makeinstall} `%{__perl} -MExtUtils::MakeMaker -e ' print \$ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=%{buildroot}%{_prefix}| : qq|DESTDIR=%{buildroot}| '`
  66
  67 cmd=/usr/share/spec-helper/compress_files
  68 [ -x $cmd ] || cmd=/usr/lib/rpm/brp-compress
  69 [ -x $cmd ] && $cmd
  70
  71 # SuSE Linux
  72 if [ -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ]
  73 then
  74     %{__mkdir_p} %{buildroot}/var/adm/perl-modules
  75     %{__cat} `find %{buildroot} -name "perllocal.pod"`  \
  76         | %{__sed} -e s+%{buildroot}++g                 \
  77         > %{buildroot}/var/adm/perl-modules/%{name}
  78 fi
  79
  80 # remove special files
  81 find %{buildroot} -name "perllocal.pod" \
  82     -o -name ".packlist"                \
  83     -o -name "*.bs"                     \
  84     |xargs -i rm -f {}
  85
  86 # no empty directories
  87 find %{buildroot}%{_prefix}             \
  88     -type d -depth                      \
  89     -exec rmdir {} \; 2>/dev/null
  90
  91 %{__perl} -MFile::Find -le '
  92     find({ wanted => \&wanted, no_chdir => 1}, "%{buildroot}");
  93     print "%doc  Schema TODO Changes README";
  94     for my $x (sort @dirs, @files) {
  95         push @ret, $x unless indirs($x);
  96         }
  97     print join "\n", sort @ret;
  98
  99     sub wanted {
 100         return if /auto$/;
 101
 102         local $_ = $File::Find::name;
 103         my $f = $_; s|^\Q%{buildroot}\E||;
 104         return unless length;
 105         return $files[@files] = $_ if -f $f;
 106
 107         $d = $_;
 108         /\Q$d\E/ && return for reverse sort @INC;
 109         $d =~ /\Q$_\E/ && return
 110             for qw|/etc %_prefix/man %_prefix/bin %_prefix/share|;
 111
 112         $dirs[@dirs] = $_;
 113         }
 114
 115     sub indirs {
 116         my $x = shift;
 117         $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs;
 118         }
 119     ' > %filelist
 120
 121 [ -z %filelist ] && {
 122     echo "ERROR: empty %files listing"
 123     exit -1
 124     }
 125
 126 %clean
 127 [ "%{buildroot}" != "/" ] && rm -rf %{buildroot}
 128
 129 %files -f %filelist
 130 %defattr(-,root,root)
 131
 132 %changelog
 133 * Fri Nov 24 2006 root@dca02
 134 - Initial build.