tests/spec/ext_framebuffer_multisample/clear.cpp

   1 /*
   2  * Copyright © 2012 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
  21  * IN THE SOFTWARE.
  22  */
  23
  24 /**
  25  * \file clear.cpp
  26  *
  27  * Verify that the implementation ignores multisample fragment
  28  * operations when performing clears.
  29  *
  30  * This test checks that the following state variables (from GL 3.0
  31  * section 4.1.3 "Multisample Fragment Operations") do not apply when
  32  * performing clears:
  33  *
  34  * - GL_SAMPLE_ALPHA_TO_COVERAGE
  35  *
  36  * - GL_SAMPLE_ALPHA_TO_ONE
  37  *
  38  * - GL_SAMPLE_COVERAGE
  39  *
  40  * - GL_SAMPLE_COVERAGE_VALUE
  41  *
  42  * - GL_SAMPLE_COVERAGE_INVERT
  43  *
  44  * The test operates by setting the above state variables in a way
  45  * that would reduce the sample coverage (for normal GL draw
  46  * operations).  Then it performs a glClear() and verifies that all
  47  * samples of all pixels were cleared.
  48  *
  49  * The test can be run in 3 modes: color, depth, and stencil.
  50  *
  51  * In depth and stencil modes, extra work is required to verify that
  52  * all samples are properly cleared.  Since a typical MSAA resolve
  53  * retains only one sample from each pixel for the depth and stencil
  54  * buffers, we need to convert depth/stencil values into colors, then
  55  * blit to the screen and check that the resulting color is correct.
  56  * The extra work of converting depth/stencil values into colors is
  57  * done using the ManifestDepth and ManifestStencil programs from
  58  * piglit-test-pattern.h.
  59  */
  60
  61 #include "piglit-test-pattern.h"
  62 #include "piglit-fbo.h"
  63 using namespace piglit_util_fbo;
  64 using namespace piglit_util_test_pattern;
  65
  66 PIGLIT_GL_TEST_CONFIG_BEGIN
  67
  68         config.supports_gl_compat_version = 10;
  69
  70         config.window_width = 256;
  71         config.window_height = 256;
  72         config.window_visual = PIGLIT_GL_VISUAL_DOUBLE | PIGLIT_GL_VISUAL_RGBA;
  73         config.khr_no_error_support = PIGLIT_NO_ERRORS;
  74
  75 PIGLIT_GL_TEST_CONFIG_END
  76
  77 namespace {
  78
  79 const int pattern_width = 256; const int pattern_height = 256;
  80
  81 Fbo multisampled_fbo;
  82 ManifestProgram *manifest_program = NULL;
  83 GLbitfield buffer_to_test;
  84
  85
  86 void
  87 print_usage_and_exit(char *prog_name)
  88 {
  89         printf("Usage: %s <num_samples> <buffer_type>\n"
  90                "  where <buffer_type> is one of:\n"
  91                "    color\n"
  92                "    depth\n"
  93                "    stencil\n",
  94                prog_name);
  95         piglit_report_result(PIGLIT_FAIL);
  96 }
  97
  98
  99 extern "C" void
 100 piglit_init(int argc, char **argv)
 101 {
 102         if (argc != 3)
 103                 print_usage_and_exit(argv[0]);
 104
 105         /* 1st arg: num_samples */
 106         char *endptr = NULL;
 107         int num_samples = strtol(argv[1], &endptr, 0);
 108         if (endptr != argv[1] + strlen(argv[1]))
 109                 print_usage_and_exit(argv[0]);
 110
 111         /* 2nd arg: buffer_type */
 112         if (strcmp(argv[2], "color") == 0) {
 113                 buffer_to_test = GL_COLOR_BUFFER_BIT;
 114         } else if (strcmp(argv[2], "depth") == 0) {
 115                 buffer_to_test = GL_DEPTH_BUFFER_BIT;
 116                 manifest_program = new ManifestDepth();
 117         } else if (strcmp(argv[2], "stencil") == 0) {
 118                 buffer_to_test = GL_STENCIL_BUFFER_BIT;
 119                 manifest_program = new ManifestStencil();
 120         } else {
 121                 print_usage_and_exit(argv[0]);
 122         }
 123
 124         piglit_require_gl_version(21);
 125         piglit_require_extension("GL_ARB_framebuffer_object");
 126         piglit_require_extension("GL_ARB_vertex_array_object");
 127
 128         /* Skip the test if num_samples > GL_MAX_SAMPLES */
 129         GLint max_samples;
 130         glGetIntegerv(GL_MAX_SAMPLES, &max_samples);
 131         if (num_samples > max_samples)
 132                 piglit_report_result(PIGLIT_SKIP);
 133
 134         multisampled_fbo.setup(FboConfig(num_samples, pattern_width,
 135                                          pattern_height));
 136         if (manifest_program)
 137                 manifest_program->compile();
 138
 139         if (!piglit_check_gl_error(GL_NO_ERROR))
 140                 piglit_report_result(PIGLIT_FAIL);
 141 }
 142
 143
 144 bool
 145 test_clear(const float r, const float g, const float b,
 146            const float a, const bool fast_clear_compatible)
 147 {
 148         bool pass = true;
 149
 150         /* Clear all buffers of the multisampled fbo to default values
 151          * (color={0,0,0,0}, depth=1, stencil=0), with no special
 152          * coverage settings set.
 153          */
 154         glBindFramebuffer(GL_DRAW_FRAMEBUFFER, multisampled_fbo.handle);
 155         multisampled_fbo.set_viewport();
 156         glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT |
 157                 GL_STENCIL_BUFFER_BIT);
 158
 159         /* Set all the clear values to non-default settings.  We use
 160          * an alpha value other than 1.0 so verify that
 161          * GL_SAMPLE_ALPHA_TO_COVERAGE and GL_SAMPLE_ALPHA_TO_ONE
 162          * don't take effect.
 163          */
 164         glClearColor(r, g, b, a);
 165         glClearDepth(0.5);
 166         glClearStencil(1);
 167
 168         /* Enable the mulitsample fragment operations that glClear()
 169          * is supposed to ignore.
 170          */
 171         glEnable(GL_SAMPLE_COVERAGE);
 172         glSampleCoverage(0.5, GL_TRUE);
 173         glEnable(GL_SAMPLE_ALPHA_TO_COVERAGE);
 174         glEnable(GL_SAMPLE_ALPHA_TO_ONE);
 175
 176         /* Clear the buffer under test. */
 177         glClear(buffer_to_test);
 178
 179         /* Reset the multisample fragment operations and clear values
 180          * to their default settings.
 181          */
 182         glClearColor(0.0, 0.0, 0.0, 0.0);
 183         glClearDepth(1.0);
 184         glClearStencil(0);
 185         glDisable(GL_SAMPLE_COVERAGE);
 186         glDisable(GL_SAMPLE_ALPHA_TO_COVERAGE);
 187         glDisable(GL_SAMPLE_ALPHA_TO_ONE);
 188
 189         /* If we are testing the depth or stencil buffer, use
 190          * manifest_program to convert depth/stencil values to
 191          * colors.
 192          */
 193         if (manifest_program)
 194                 manifest_program->run();
 195
 196         /* Blit the color values from the multisampled FBO to the
 197          * screen, forcing a resolve.
 198          */
 199         glBindFramebuffer(GL_READ_FRAMEBUFFER, multisampled_fbo.handle);
 200         glBindFramebuffer(GL_DRAW_FRAMEBUFFER, piglit_winsys_fbo);
 201         glBlitFramebuffer(0, 0, pattern_width, pattern_height,
 202                           0, 0, pattern_width, pattern_height,
 203                           GL_COLOR_BUFFER_BIT, GL_NEAREST);
 204
 205         /* Figure out what color we expect to be drawn, depending on
 206          * which buffer was tested:
 207          *
 208          * - If we tested the color buffer, we should have gotten the
 209          *   clear color back verbatim.
 210          *
 211          * - If we tested the depth buffer, we should have gotten red,
 212          *   since the ManifestDepth program converts a depth value of
 213          *   0.5 to red.
 214          *
 215          * - If we tested the stencil buffer, we should have gotten
 216          *   blue, since the ManifestStencil program converts a
 217          *   stencil value of 1 to blue.
 218          */
 219         const float expected_color[4] = { r, g, b, a };
 220         static const float expected_depth[4] = { 1.0, 0.0, 0.0, 1.0 };
 221         static const float expected_stencil[4] = { 0.0, 0.0, 1.0, 1.0 };
 222         const float *expected = NULL;
 223         switch (buffer_to_test) {
 224         case GL_COLOR_BUFFER_BIT:
 225                 expected = expected_color;
 226                 break;
 227         case GL_DEPTH_BUFFER_BIT:
 228                 expected = expected_depth;
 229                 break;
 230         case GL_STENCIL_BUFFER_BIT:
 231                 expected = expected_stencil;
 232                 break;
 233         default:
 234                 printf("Unexpected value in buffer_to_test\n");
 235                 piglit_report_result(PIGLIT_FAIL);
 236                 break;
 237         }
 238
 239         /* Test that the appropriate color was drawn.  Since the
 240          * resolve operation averaged together all the color samples
 241          * corresponding to each pixel, this effectively verifies that
 242          * all samples of every pixel were correctly cleared.
 243          */
 244         glBindFramebuffer(GL_READ_FRAMEBUFFER, piglit_winsys_fbo);
 245         pass = piglit_probe_rect_rgba(0, 0, piglit_width, piglit_height,
 246                                       expected) && pass;
 247
 248         if (buffer_to_test == GL_COLOR_BUFFER_BIT)
 249                 printf("fast_clear_compatible = %s, result = %s\n",
 250                        fast_clear_compatible ? "true" : "false",
 251                        pass ? "pass" : "fail");
 252
 253         piglit_present_results();
 254
 255         return pass;
 256 }
 257
 258 extern "C" enum piglit_result
 259 piglit_display()
 260 {
 261         bool pass =true;
 262
 263         /* Non 'fast clear' path. */
 264         pass = test_clear(1.0, 1.0, 1.0, 0.5, false) && pass;
 265
 266         /* Test with color values compatible with Intel's i965 driver's
 267          * 'fast clear' constraints. It varifies the 'fast clear' path
 268          * if supported by the implementation.
 269          */
 270         pass = test_clear(1.0, 1.0, 1.0, 0.0, true) && pass;
 271
 272         return pass ? PIGLIT_PASS : PIGLIT_FAIL;
 273 }
 274
 275 } /* Anonymous namespace */