drivers/media/video/cx231xx/cx231xx-i2c.c

   1 /*
   2    cx231xx-i2c.c - driver for Conexant Cx23100/101/102 USB video capture devices
   3
   4    Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
   5                 Based on em28xx driver
   6                 Based on Cx23885 driver
   7
   8    This program is free software; you can redistribute it and/or modify
   9    it under the terms of the GNU General Public License as published by
  10    the Free Software Foundation; either version 2 of the License, or
  11    (at your option) any later version.
  12
  13    This program is distributed in the hope that it will be useful,
  14    but WITHOUT ANY WARRANTY; without even the implied warranty of
  15    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16    GNU General Public License for more details.
  17
  18    You should have received a copy of the GNU General Public License
  19    along with this program; if not, write to the Free Software
  20    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/kernel.h>
  25 #include <linux/usb.h>
  26 #include <linux/i2c.h>
  27 #include <media/v4l2-common.h>
  28 #include <media/tuner.h>
  29
  30 #include "cx231xx.h"
  31
  32 /* ----------------------------------------------------------- */
  33
  34 static unsigned int i2c_scan;
  35 module_param(i2c_scan, int, 0444);
  36 MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
  37
  38 static unsigned int i2c_debug;
  39 module_param(i2c_debug, int, 0644);
  40 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
  41
  42 #define dprintk1(lvl, fmt, args...)                     \
  43 do {                                                    \
  44         if (i2c_debug >= lvl) {                         \
  45                 printk(fmt, ##args);                    \
  46                 }                                       \
  47 } while (0)
  48
  49 #define dprintk2(lvl, fmt, args...)                     \
  50 do {                                                    \
  51         if (i2c_debug >= lvl) {                         \
  52                 printk(KERN_DEBUG "%s at %s: " fmt,     \
  53                        dev->name, __func__ , ##args);   \
  54       }                                                 \
  55 } while (0)
  56
  57 /*
  58  * cx231xx_i2c_send_bytes()
  59  */
  60 int cx231xx_i2c_send_bytes(struct i2c_adapter *i2c_adap,
  61                            const struct i2c_msg *msg)
  62 {
  63         struct cx231xx_i2c *bus = i2c_adap->algo_data;
  64         struct cx231xx *dev = bus->dev;
  65         struct cx231xx_i2c_xfer_data req_data;
  66         int status = 0;
  67         u16 size = 0;
  68         u8 loop = 0;
  69         u8 saddr_len = 1;
  70         u8 *buf_ptr = NULL;
  71         u16 saddr = 0;
  72         u8 need_gpio = 0;
  73
  74         if ((bus->nr == 1) && (msg->addr == 0x61)
  75             && (dev->tuner_type == TUNER_XC5000)) {
  76
  77                 size = msg->len;
  78
  79                 if (size == 2) {        /* register write sub addr */
  80                         /* Just writing sub address will cause problem
  81                         * to XC5000. So ignore the request */
  82                         return 0;
  83                 } else if (size == 4) { /* register write with sub addr */
  84                         if (msg->len >= 2)
  85                                 saddr = msg->buf[0] << 8 | msg->buf[1];
  86                         else if (msg->len == 1)
  87                                 saddr = msg->buf[0];
  88
  89                         switch (saddr) {
  90                         case 0x0000:    /* start tuner calibration mode */
  91                                 need_gpio = 1;
  92                                 /* FW Loading is done */
  93                                 dev->xc_fw_load_done = 1;
  94                                 break;
  95                         case 0x000D:    /* Set signal source */
  96                         case 0x0001:    /* Set TV standard - Video */
  97                         case 0x0002:    /* Set TV standard - Audio */
  98                         case 0x0003:    /* Set RF Frequency */
  99                                 need_gpio = 1;
 100                                 break;
 101                         default:
 102                                 if (dev->xc_fw_load_done)
 103                                         need_gpio = 1;
 104                                 break;
 105                         }
 106
 107                         if (need_gpio) {
 108                                 dprintk1(1,
 109                                 "GPIO WRITE: addr 0x%x, len %d, saddr 0x%x\n",
 110                                 msg->addr, msg->len, saddr);
 111
 112                                 return dev->cx231xx_gpio_i2c_write(dev,
 113                                                                    msg->addr,
 114                                                                    msg->buf,
 115                                                                    msg->len);
 116                         }
 117                 }
 118
 119                 /* special case for Xc5000 tuner case */
 120                 saddr_len = 1;
 121
 122                 /* adjust the length to correct length */
 123                 size -= saddr_len;
 124                 buf_ptr = (u8 *) (msg->buf + 1);
 125
 126                 do {
 127                         /* prepare xfer_data struct */
 128                         req_data.dev_addr = msg->addr;
 129                         req_data.direction = msg->flags;
 130                         req_data.saddr_len = saddr_len;
 131                         req_data.saddr_dat = msg->buf[0];
 132                         req_data.buf_size = size > 16 ? 16 : size;
 133                         req_data.p_buffer = (u8 *) (buf_ptr + loop * 16);
 134
 135                         bus->i2c_nostop = (size > 16) ? 1 : 0;
 136                         bus->i2c_reserve = (loop == 0) ? 0 : 1;
 137
 138                         /* usb send command */
 139                         status = dev->cx231xx_send_usb_command(bus, &req_data);
 140                         loop++;
 141
 142                         if (size >= 16)
 143                                 size -= 16;
 144                         else
 145                                 size = 0;
 146
 147                 } while (size > 0);
 148
 149                 bus->i2c_nostop = 0;
 150                 bus->i2c_reserve = 0;
 151
 152         } else {                /* regular case */
 153
 154                 /* prepare xfer_data struct */
 155                 req_data.dev_addr = msg->addr;
 156                 req_data.direction = msg->flags;
 157                 req_data.saddr_len = 0;
 158                 req_data.saddr_dat = 0;
 159                 req_data.buf_size = msg->len;
 160                 req_data.p_buffer = msg->buf;
 161
 162                 /* usb send command */
 163                 status = dev->cx231xx_send_usb_command(bus, &req_data);
 164         }
 165
 166         return status < 0 ? status : 0;
 167 }
 168
 169 /*
 170  * cx231xx_i2c_recv_bytes()
 171  * read a byte from the i2c device
 172  */
 173 static int cx231xx_i2c_recv_bytes(struct i2c_adapter *i2c_adap,
 174                                   const struct i2c_msg *msg)
 175 {
 176         struct cx231xx_i2c *bus = i2c_adap->algo_data;
 177         struct cx231xx *dev = bus->dev;
 178         struct cx231xx_i2c_xfer_data req_data;
 179         int status = 0;
 180         u16 saddr = 0;
 181         u8 need_gpio = 0;
 182
 183         if ((bus->nr == 1) && (msg->addr == 0x61)
 184             && dev->tuner_type == TUNER_XC5000) {
 185
 186                 if (msg->len == 2)
 187                         saddr = msg->buf[0] << 8 | msg->buf[1];
 188                 else if (msg->len == 1)
 189                         saddr = msg->buf[0];
 190
 191                 if (dev->xc_fw_load_done) {
 192
 193                         switch (saddr) {
 194                         case 0x0009:    /* BUSY check */
 195                                 dprintk1(1,
 196                                 "GPIO R E A D: Special case BUSY check \n");
 197                                 /*Try read BUSY register, just set it to zero*/
 198                                 msg->buf[0] = 0;
 199                                 if (msg->len == 2)
 200                                         msg->buf[1] = 0;
 201                                 return 0;
 202                         case 0x0004:    /* read Lock status */
 203                                 need_gpio = 1;
 204                                 break;
 205
 206                         }
 207
 208                         if (need_gpio) {
 209                                 /* this is a special case to handle Xceive tuner
 210                                 clock stretch issue with gpio based I2C */
 211
 212                                 dprintk1(1,
 213                                 "GPIO R E A D: addr 0x%x, len %d, saddr 0x%x\n",
 214                                 msg->addr, msg->len,
 215                                 msg->buf[0] << 8 | msg->buf[1]);
 216
 217                                 status =
 218                                     dev->cx231xx_gpio_i2c_write(dev, msg->addr,
 219                                                                 msg->buf,
 220                                                                 msg->len);
 221                                 status =
 222                                     dev->cx231xx_gpio_i2c_read(dev, msg->addr,
 223                                                                msg->buf,
 224                                                                msg->len);
 225                                 return status;
 226                         }
 227                 }
 228
 229                 /* prepare xfer_data struct */
 230                 req_data.dev_addr = msg->addr;
 231                 req_data.direction = msg->flags;
 232                 req_data.saddr_len = msg->len;
 233                 req_data.saddr_dat = msg->buf[0] << 8 | msg->buf[1];
 234                 req_data.buf_size = msg->len;
 235                 req_data.p_buffer = msg->buf;
 236
 237                 /* usb send command */
 238                 status = dev->cx231xx_send_usb_command(bus, &req_data);
 239
 240         } else {
 241
 242                 /* prepare xfer_data struct */
 243                 req_data.dev_addr = msg->addr;
 244                 req_data.direction = msg->flags;
 245                 req_data.saddr_len = 0;
 246                 req_data.saddr_dat = 0;
 247                 req_data.buf_size = msg->len;
 248                 req_data.p_buffer = msg->buf;
 249
 250                 /* usb send command */
 251                 status = dev->cx231xx_send_usb_command(bus, &req_data);
 252         }
 253
 254         return status < 0 ? status : 0;
 255 }
 256
 257 /*
 258  * cx231xx_i2c_recv_bytes_with_saddr()
 259  * read a byte from the i2c device
 260  */
 261 static int cx231xx_i2c_recv_bytes_with_saddr(struct i2c_adapter *i2c_adap,
 262                                              const struct i2c_msg *msg1,
 263                                              const struct i2c_msg *msg2)
 264 {
 265         struct cx231xx_i2c *bus = i2c_adap->algo_data;
 266         struct cx231xx *dev = bus->dev;
 267         struct cx231xx_i2c_xfer_data req_data;
 268         int status = 0;
 269         u16 saddr = 0;
 270         u8 need_gpio = 0;
 271
 272         if (msg1->len == 2)
 273                 saddr = msg1->buf[0] << 8 | msg1->buf[1];
 274         else if (msg1->len == 1)
 275                 saddr = msg1->buf[0];
 276
 277         if ((bus->nr == 1) && (msg2->addr == 0x61)
 278             && dev->tuner_type == TUNER_XC5000) {
 279
 280                 if ((msg2->len < 16)) {
 281
 282                         dprintk1(1,
 283                         "i2c_read: addr 0x%x, len %d, saddr 0x%x, len %d\n",
 284                         msg2->addr, msg2->len, saddr, msg1->len);
 285
 286                         switch (saddr) {
 287                         case 0x0008:    /* read FW load status */
 288                                 need_gpio = 1;
 289                                 break;
 290                         case 0x0004:    /* read Lock status */
 291                                 need_gpio = 1;
 292                                 break;
 293                         }
 294
 295                         if (need_gpio) {
 296                                 status =
 297                                     dev->cx231xx_gpio_i2c_write(dev, msg1->addr,
 298                                                                 msg1->buf,
 299                                                                 msg1->len);
 300                                 status =
 301                                     dev->cx231xx_gpio_i2c_read(dev, msg2->addr,
 302                                                                msg2->buf,
 303                                                                msg2->len);
 304                                 return status;
 305                         }
 306                 }
 307         }
 308
 309         /* prepare xfer_data struct */
 310         req_data.dev_addr = msg2->addr;
 311         req_data.direction = msg2->flags;
 312         req_data.saddr_len = msg1->len;
 313         req_data.saddr_dat = saddr;
 314         req_data.buf_size = msg2->len;
 315         req_data.p_buffer = msg2->buf;
 316
 317         /* usb send command */
 318         status = dev->cx231xx_send_usb_command(bus, &req_data);
 319
 320         return status < 0 ? status : 0;
 321 }
 322
 323 /*
 324  * cx231xx_i2c_check_for_device()
 325  * check if there is a i2c_device at the supplied address
 326  */
 327 static int cx231xx_i2c_check_for_device(struct i2c_adapter *i2c_adap,
 328                                         const struct i2c_msg *msg)
 329 {
 330         struct cx231xx_i2c *bus = i2c_adap->algo_data;
 331         struct cx231xx *dev = bus->dev;
 332         struct cx231xx_i2c_xfer_data req_data;
 333         int status = 0;
 334
 335         /* prepare xfer_data struct */
 336         req_data.dev_addr = msg->addr;
 337         req_data.direction = msg->flags;
 338         req_data.saddr_len = 0;
 339         req_data.saddr_dat = 0;
 340         req_data.buf_size = 0;
 341         req_data.p_buffer = NULL;
 342
 343         /* usb send command */
 344         status = dev->cx231xx_send_usb_command(bus, &req_data);
 345
 346         return status < 0 ? status : 0;
 347 }
 348
 349 /*
 350  * cx231xx_i2c_xfer()
 351  * the main i2c transfer function
 352  */
 353 static int cx231xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 354                             struct i2c_msg msgs[], int num)
 355 {
 356         struct cx231xx_i2c *bus = i2c_adap->algo_data;
 357         struct cx231xx *dev = bus->dev;
 358         int addr, rc, i, byte;
 359
 360         if (num <= 0)
 361                 return 0;
 362
 363         for (i = 0; i < num; i++) {
 364
 365                 addr = msgs[i].addr >> 1;
 366
 367                 dprintk2(2, "%s %s addr=%x len=%d:",
 368                          (msgs[i].flags & I2C_M_RD) ? "read" : "write",
 369                          i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
 370                 if (!msgs[i].len) {
 371                         /* no len: check only for device presence */
 372                         rc = cx231xx_i2c_check_for_device(i2c_adap, &msgs[i]);
 373                         if (rc < 0) {
 374                                 dprintk2(2, " no device\n");
 375                                 return rc;
 376                         }
 377
 378                 } else if (msgs[i].flags & I2C_M_RD) {
 379                         /* read bytes */
 380                         rc = cx231xx_i2c_recv_bytes(i2c_adap, &msgs[i]);
 381                         if (i2c_debug >= 2) {
 382                                 for (byte = 0; byte < msgs[i].len; byte++)
 383                                         printk(" %02x", msgs[i].buf[byte]);
 384                         }
 385                 } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
 386                            msgs[i].addr == msgs[i + 1].addr
 387                            && (msgs[i].len <= 2) && (bus->nr < 2)) {
 388                         /* read bytes */
 389                         rc = cx231xx_i2c_recv_bytes_with_saddr(i2c_adap,
 390                                                                &msgs[i],
 391                                                                &msgs[i + 1]);
 392                         if (i2c_debug >= 2) {
 393                                 for (byte = 0; byte < msgs[i].len; byte++)
 394                                         printk(" %02x", msgs[i].buf[byte]);
 395                         }
 396                         i++;
 397                 } else {
 398                         /* write bytes */
 399                         if (i2c_debug >= 2) {
 400                                 for (byte = 0; byte < msgs[i].len; byte++)
 401                                         printk(" %02x", msgs[i].buf[byte]);
 402                         }
 403                         rc = cx231xx_i2c_send_bytes(i2c_adap, &msgs[i]);
 404                 }
 405                 if (rc < 0)
 406                         goto err;
 407                 if (i2c_debug >= 2)
 408                         printk("\n");
 409         }
 410
 411         return num;
 412 err:
 413         dprintk2(2, " ERROR: %i\n", rc);
 414         return rc;
 415 }
 416
 417 /* ----------------------------------------------------------- */
 418
 419 /*
 420  * functionality()
 421  */
 422 static u32 functionality(struct i2c_adapter *adap)
 423 {
 424         return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
 425 }
 426
 427 static struct i2c_algorithm cx231xx_algo = {
 428         .master_xfer = cx231xx_i2c_xfer,
 429         .functionality = functionality,
 430 };
 431
 432 static struct i2c_adapter cx231xx_adap_template = {
 433         .owner = THIS_MODULE,
 434         .name = "cx231xx",
 435         .algo = &cx231xx_algo,
 436 };
 437
 438 static struct i2c_client cx231xx_client_template = {
 439         .name = "cx231xx internal",
 440 };
 441
 442 /* ----------------------------------------------------------- */
 443
 444 /*
 445  * i2c_devs
 446  * incomplete list of known devices
 447  */
 448 static char *i2c_devs[128] = {
 449         [0x60 >> 1] = "colibri",
 450         [0x88 >> 1] = "hammerhead",
 451         [0x8e >> 1] = "CIR",
 452         [0x32 >> 1] = "GeminiIII",
 453         [0x02 >> 1] = "Aquarius",
 454         [0xa0 >> 1] = "eeprom",
 455         [0xc0 >> 1] = "tuner/XC3028",
 456         [0xc2 >> 1] = "tuner/XC5000",
 457 };
 458
 459 /*
 460  * cx231xx_do_i2c_scan()
 461  * check i2c address range for devices
 462  */
 463 void cx231xx_do_i2c_scan(struct cx231xx *dev, struct i2c_client *c)
 464 {
 465         unsigned char buf;
 466         int i, rc;
 467
 468         cx231xx_info(": Checking for I2C devices ..\n");
 469         for (i = 0; i < 128; i++) {
 470                 c->addr = i;
 471                 rc = i2c_master_recv(c, &buf, 0);
 472                 if (rc < 0)
 473                         continue;
 474                 cx231xx_info("%s: i2c scan: found device @ 0x%x  [%s]\n",
 475                              dev->name, i << 1,
 476                              i2c_devs[i] ? i2c_devs[i] : "???");
 477         }
 478         cx231xx_info(": Completed Checking for I2C devices.\n");
 479 }
 480
 481 /*
 482  * cx231xx_i2c_register()
 483  * register i2c bus
 484  */
 485 int cx231xx_i2c_register(struct cx231xx_i2c *bus)
 486 {
 487         struct cx231xx *dev = bus->dev;
 488
 489         BUG_ON(!dev->cx231xx_send_usb_command);
 490
 491         memcpy(&bus->i2c_adap, &cx231xx_adap_template, sizeof(bus->i2c_adap));
 492         memcpy(&bus->i2c_algo, &cx231xx_algo, sizeof(bus->i2c_algo));
 493         memcpy(&bus->i2c_client, &cx231xx_client_template,
 494                sizeof(bus->i2c_client));
 495
 496         bus->i2c_adap.dev.parent = &dev->udev->dev;
 497
 498         strlcpy(bus->i2c_adap.name, bus->dev->name, sizeof(bus->i2c_adap.name));
 499
 500         bus->i2c_algo.data = bus;
 501         bus->i2c_adap.algo_data = bus;
 502         i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
 503         i2c_add_adapter(&bus->i2c_adap);
 504
 505         bus->i2c_client.adapter = &bus->i2c_adap;
 506
 507         if (0 == bus->i2c_rc) {
 508                 if (i2c_scan)
 509                         cx231xx_do_i2c_scan(dev, &bus->i2c_client);
 510
 511                 /* Instantiate the IR receiver device, if present */
 512                 cx231xx_register_i2c_ir(dev);
 513         } else
 514                 cx231xx_warn("%s: i2c bus %d register FAILED\n",
 515                              dev->name, bus->nr);
 516
 517         return bus->i2c_rc;
 518 }
 519
 520 /*
 521  * cx231xx_i2c_unregister()
 522  * unregister i2c_bus
 523  */
 524 int cx231xx_i2c_unregister(struct cx231xx_i2c *bus)
 525 {
 526         i2c_del_adapter(&bus->i2c_adap);
 527         return 0;
 528 }