Linux 2.6.34-rc3
[pohmelfs.git] / drivers / mfd / twl6030-irq.c
blob10bf228ad626b6caedec0b8a50d2cff03008aa53
1 /*
2 * twl6030-irq.c - TWL6030 irq support
4 * Copyright (C) 2005-2009 Texas Instruments, Inc.
6 * Modifications to defer interrupt handling to a kernel thread:
7 * Copyright (C) 2006 MontaVista Software, Inc.
9 * Based on tlv320aic23.c:
10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
12 * Code cleanup and modifications to IRQ handler.
13 * by syed khasim <x0khasim@ti.com>
15 * TWL6030 specific code and IRQ handling changes by
16 * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
17 * Balaji T K <balajitk@ti.com>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
34 #include <linux/init.h>
35 #include <linux/interrupt.h>
36 #include <linux/irq.h>
37 #include <linux/kthread.h>
38 #include <linux/i2c/twl.h>
41 * TWL6030 (unlike its predecessors, which had two level interrupt handling)
42 * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
43 * It exposes status bits saying who has raised an interrupt. There are
44 * three mask registers that corresponds to these status registers, that
45 * enables/disables these interrupts.
47 * We set up IRQs starting at a platform-specified base. An interrupt map table,
48 * specifies mapping between interrupt number and the associated module.
52 static int twl6030_interrupt_mapping[24] = {
53 PWR_INTR_OFFSET, /* Bit 0 PWRON */
54 PWR_INTR_OFFSET, /* Bit 1 RPWRON */
55 PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */
56 RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
57 RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
58 HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
59 SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
60 SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */
62 SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */
63 BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
64 SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
65 MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
66 RSV_INTR_OFFSET, /* Bit 12 Reserved */
67 MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */
68 MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */
69 GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
71 USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
72 USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
73 USBOTG_INTR_OFFSET, /* Bit 18 ID */
74 USBOTG_INTR_OFFSET, /* Bit 19 VBUS */
75 CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
76 CHARGER_INTR_OFFSET, /* Bit 21 EXT_CHRG */
77 CHARGER_INTR_OFFSET, /* Bit 22 INT_CHRG */
78 RSV_INTR_OFFSET, /* Bit 23 Reserved */
80 /*----------------------------------------------------------------------*/
82 static unsigned twl6030_irq_base;
84 static struct completion irq_event;
87 * This thread processes interrupts reported by the Primary Interrupt Handler.
89 static int twl6030_irq_thread(void *data)
91 long irq = (long)data;
92 static unsigned i2c_errors;
93 static const unsigned max_i2c_errors = 100;
94 int ret;
96 current->flags |= PF_NOFREEZE;
98 while (!kthread_should_stop()) {
99 int i;
100 union {
101 u8 bytes[4];
102 u32 int_sts;
103 } sts;
105 /* Wait for IRQ, then read PIH irq status (also blocking) */
106 wait_for_completion_interruptible(&irq_event);
108 /* read INT_STS_A, B and C in one shot using a burst read */
109 ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes,
110 REG_INT_STS_A, 3);
111 if (ret) {
112 pr_warning("twl6030: I2C error %d reading PIH ISR\n",
113 ret);
114 if (++i2c_errors >= max_i2c_errors) {
115 printk(KERN_ERR "Maximum I2C error count"
116 " exceeded. Terminating %s.\n",
117 __func__);
118 break;
120 complete(&irq_event);
121 continue;
126 sts.bytes[3] = 0; /* Only 24 bits are valid*/
128 for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) {
129 local_irq_disable();
130 if (sts.int_sts & 0x1) {
131 int module_irq = twl6030_irq_base +
132 twl6030_interrupt_mapping[i];
133 struct irq_desc *d = irq_to_desc(module_irq);
135 if (!d) {
136 pr_err("twl6030: Invalid SIH IRQ: %d\n",
137 module_irq);
138 return -EINVAL;
141 /* These can't be masked ... always warn
142 * if we get any surprises.
144 if (d->status & IRQ_DISABLED)
145 note_interrupt(module_irq, d,
146 IRQ_NONE);
147 else
148 d->handle_irq(module_irq, d);
151 local_irq_enable();
153 ret = twl_i2c_write(TWL_MODULE_PIH, sts.bytes,
154 REG_INT_STS_A, 3); /* clear INT_STS_A */
155 if (ret)
156 pr_warning("twl6030: I2C error in clearing PIH ISR\n");
158 enable_irq(irq);
161 return 0;
165 * handle_twl6030_int() is the desc->handle method for the twl6030 interrupt.
166 * This is a chained interrupt, so there is no desc->action method for it.
167 * Now we need to query the interrupt controller in the twl6030 to determine
168 * which module is generating the interrupt request. However, we can't do i2c
169 * transactions in interrupt context, so we must defer that work to a kernel
170 * thread. All we do here is acknowledge and mask the interrupt and wakeup
171 * the kernel thread.
173 static irqreturn_t handle_twl6030_pih(int irq, void *devid)
175 disable_irq_nosync(irq);
176 complete(devid);
177 return IRQ_HANDLED;
180 /*----------------------------------------------------------------------*/
182 static inline void activate_irq(int irq)
184 #ifdef CONFIG_ARM
185 /* ARM requires an extra step to clear IRQ_NOREQUEST, which it
186 * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
188 set_irq_flags(irq, IRQF_VALID);
189 #else
190 /* same effect on other architectures */
191 set_irq_noprobe(irq);
192 #endif
195 /*----------------------------------------------------------------------*/
197 static unsigned twl6030_irq_next;
199 /*----------------------------------------------------------------------*/
200 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
202 int ret;
203 u8 unmask_value;
204 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
205 REG_INT_STS_A + offset);
206 unmask_value &= (~(bit_mask));
207 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
208 REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
209 return ret;
211 EXPORT_SYMBOL(twl6030_interrupt_unmask);
213 int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
215 int ret;
216 u8 mask_value;
217 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
218 REG_INT_STS_A + offset);
219 mask_value |= (bit_mask);
220 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
221 REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
222 return ret;
224 EXPORT_SYMBOL(twl6030_interrupt_mask);
226 int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
229 int status = 0;
230 int i;
231 struct task_struct *task;
232 int ret;
233 u8 mask[4];
235 static struct irq_chip twl6030_irq_chip;
236 mask[1] = 0xFF;
237 mask[2] = 0xFF;
238 mask[3] = 0xFF;
239 ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
240 REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */
241 ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
242 REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */
243 ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
244 REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */
246 twl6030_irq_base = irq_base;
248 /* install an irq handler for each of the modules;
249 * clone dummy irq_chip since PIH can't *do* anything
251 twl6030_irq_chip = dummy_irq_chip;
252 twl6030_irq_chip.name = "twl6030";
253 twl6030_irq_chip.set_type = NULL;
255 for (i = irq_base; i < irq_end; i++) {
256 set_irq_chip_and_handler(i, &twl6030_irq_chip,
257 handle_simple_irq);
258 activate_irq(i);
261 twl6030_irq_next = i;
262 pr_info("twl6030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
263 irq_num, irq_base, twl6030_irq_next - 1);
265 /* install an irq handler to demultiplex the TWL6030 interrupt */
266 init_completion(&irq_event);
267 task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
268 if (IS_ERR(task)) {
269 pr_err("twl6030: could not create irq %d thread!\n", irq_num);
270 status = PTR_ERR(task);
271 goto fail_kthread;
274 status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED,
275 "TWL6030-PIH", &irq_event);
276 if (status < 0) {
277 pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
278 goto fail_irq;
280 return status;
281 fail_irq:
282 free_irq(irq_num, &irq_event);
284 fail_kthread:
285 for (i = irq_base; i < irq_end; i++)
286 set_irq_chip_and_handler(i, NULL, NULL);
287 return status;
290 int twl6030_exit_irq(void)
293 if (twl6030_irq_base) {
294 pr_err("twl6030: can't yet clean up IRQs?\n");
295 return -ENOSYS;
297 return 0;