2 * Davicom DM9000 Fast Ethernet driver for Linux.
3 * Copyright (C) 1997 Sten Wang
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * (C) Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
17 * Additional updates, Copyright:
18 * Ben Dooks <ben@simtec.co.uk>
19 * Sascha Hauer <s.hauer@pengutronix.de>
22 #include <linux/module.h>
23 #include <linux/ioport.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/init.h>
27 #include <linux/skbuff.h>
28 #include <linux/spinlock.h>
29 #include <linux/crc32.h>
30 #include <linux/mii.h>
31 #include <linux/ethtool.h>
32 #include <linux/dm9000.h>
33 #include <linux/delay.h>
34 #include <linux/platform_device.h>
35 #include <linux/irq.h>
37 #include <asm/delay.h>
43 /* Board/System/Debug information/definition ---------------- */
45 #define DM9000_PHY 0x40 /* PHY address 0x01 */
47 #define CARDNAME "dm9000"
48 #define DRV_VERSION "1.31"
51 * Transmit timeout, default 5 seconds.
53 static int watchdog
= 5000;
54 module_param(watchdog
, int, 0400);
55 MODULE_PARM_DESC(watchdog
, "transmit timeout in milliseconds");
57 /* DM9000 register address locking.
59 * The DM9000 uses an address register to control where data written
60 * to the data register goes. This means that the address register
61 * must be preserved over interrupts or similar calls.
63 * During interrupt and other critical calls, a spinlock is used to
64 * protect the system, but the calls themselves save the address
65 * in the address register in case they are interrupting another
66 * access to the device.
68 * For general accesses a lock is provided so that calls which are
69 * allowed to sleep are serialised so that the address register does
70 * not need to be saved. This lock also serves to serialise access
71 * to the EEPROM and PHY access registers which are shared between
75 /* The driver supports the original DM9000E, and now the two newer
76 * devices, DM9000A and DM9000B.
80 TYPE_DM9000E
, /* original DM9000 */
85 /* Structure/enum declaration ------------------------------- */
86 typedef struct board_info
{
88 void __iomem
*io_addr
; /* Register I/O base address */
89 void __iomem
*io_data
; /* Data I/O address */
97 u8 io_mode
; /* 0:word, 2:byte */
102 unsigned int in_suspend
:1;
103 unsigned int wake_supported
:1;
106 enum dm9000_type type
;
108 void (*inblk
)(void __iomem
*port
, void *data
, int length
);
109 void (*outblk
)(void __iomem
*port
, void *data
, int length
);
110 void (*dumpblk
)(void __iomem
*port
, int length
);
112 struct device
*dev
; /* parent device */
114 struct resource
*addr_res
; /* resources found */
115 struct resource
*data_res
;
116 struct resource
*addr_req
; /* resources requested */
117 struct resource
*data_req
;
118 struct resource
*irq_res
;
122 struct mutex addr_lock
; /* phy and eeprom access lock */
124 struct delayed_work phy_poll
;
125 struct net_device
*ndev
;
129 struct mii_if_info mii
;
140 #define dm9000_dbg(db, lev, msg...) do { \
141 if ((lev) < CONFIG_DM9000_DEBUGLEVEL && \
142 (lev) < db->debug_level) { \
143 dev_dbg(db->dev, msg); \
147 static inline board_info_t
*to_dm9000_board(struct net_device
*dev
)
149 return netdev_priv(dev
);
152 /* DM9000 network board routine ---------------------------- */
155 dm9000_reset(board_info_t
* db
)
157 dev_dbg(db
->dev
, "resetting device\n");
160 writeb(DM9000_NCR
, db
->io_addr
);
162 writeb(NCR_RST
, db
->io_data
);
167 * Read a byte from I/O port
170 ior(board_info_t
* db
, int reg
)
172 writeb(reg
, db
->io_addr
);
173 return readb(db
->io_data
);
177 * Write a byte to I/O port
181 iow(board_info_t
* db
, int reg
, int value
)
183 writeb(reg
, db
->io_addr
);
184 writeb(value
, db
->io_data
);
187 /* routines for sending block to chip */
189 static void dm9000_outblk_8bit(void __iomem
*reg
, void *data
, int count
)
191 writesb(reg
, data
, count
);
194 static void dm9000_outblk_16bit(void __iomem
*reg
, void *data
, int count
)
196 writesw(reg
, data
, (count
+1) >> 1);
199 static void dm9000_outblk_32bit(void __iomem
*reg
, void *data
, int count
)
201 writesl(reg
, data
, (count
+3) >> 2);
204 /* input block from chip to memory */
206 static void dm9000_inblk_8bit(void __iomem
*reg
, void *data
, int count
)
208 readsb(reg
, data
, count
);
212 static void dm9000_inblk_16bit(void __iomem
*reg
, void *data
, int count
)
214 readsw(reg
, data
, (count
+1) >> 1);
217 static void dm9000_inblk_32bit(void __iomem
*reg
, void *data
, int count
)
219 readsl(reg
, data
, (count
+3) >> 2);
222 /* dump block from chip to null */
224 static void dm9000_dumpblk_8bit(void __iomem
*reg
, int count
)
229 for (i
= 0; i
< count
; i
++)
233 static void dm9000_dumpblk_16bit(void __iomem
*reg
, int count
)
238 count
= (count
+ 1) >> 1;
240 for (i
= 0; i
< count
; i
++)
244 static void dm9000_dumpblk_32bit(void __iomem
*reg
, int count
)
249 count
= (count
+ 3) >> 2;
251 for (i
= 0; i
< count
; i
++)
257 * select the specified set of io routines to use with the
261 static void dm9000_set_io(struct board_info
*db
, int byte_width
)
263 /* use the size of the data resource to work out what IO
264 * routines we want to use
267 switch (byte_width
) {
269 db
->dumpblk
= dm9000_dumpblk_8bit
;
270 db
->outblk
= dm9000_outblk_8bit
;
271 db
->inblk
= dm9000_inblk_8bit
;
276 dev_dbg(db
->dev
, ": 3 byte IO, falling back to 16bit\n");
278 db
->dumpblk
= dm9000_dumpblk_16bit
;
279 db
->outblk
= dm9000_outblk_16bit
;
280 db
->inblk
= dm9000_inblk_16bit
;
285 db
->dumpblk
= dm9000_dumpblk_32bit
;
286 db
->outblk
= dm9000_outblk_32bit
;
287 db
->inblk
= dm9000_inblk_32bit
;
292 static void dm9000_schedule_poll(board_info_t
*db
)
294 if (db
->type
== TYPE_DM9000E
)
295 schedule_delayed_work(&db
->phy_poll
, HZ
* 2);
298 static int dm9000_ioctl(struct net_device
*dev
, struct ifreq
*req
, int cmd
)
300 board_info_t
*dm
= to_dm9000_board(dev
);
302 if (!netif_running(dev
))
305 return generic_mii_ioctl(&dm
->mii
, if_mii(req
), cmd
, NULL
);
309 dm9000_read_locked(board_info_t
*db
, int reg
)
314 spin_lock_irqsave(&db
->lock
, flags
);
316 spin_unlock_irqrestore(&db
->lock
, flags
);
321 static int dm9000_wait_eeprom(board_info_t
*db
)
324 int timeout
= 8; /* wait max 8msec */
326 /* The DM9000 data sheets say we should be able to
327 * poll the ERRE bit in EPCR to wait for the EEPROM
328 * operation. From testing several chips, this bit
329 * does not seem to work.
331 * We attempt to use the bit, but fall back to the
332 * timeout (which is why we do not return an error
333 * on expiry) to say that the EEPROM operation has
338 status
= dm9000_read_locked(db
, DM9000_EPCR
);
340 if ((status
& EPCR_ERRE
) == 0)
346 dev_dbg(db
->dev
, "timeout waiting EEPROM\n");
355 * Read a word data from EEPROM
358 dm9000_read_eeprom(board_info_t
*db
, int offset
, u8
*to
)
362 if (db
->flags
& DM9000_PLATF_NO_EEPROM
) {
368 mutex_lock(&db
->addr_lock
);
370 spin_lock_irqsave(&db
->lock
, flags
);
372 iow(db
, DM9000_EPAR
, offset
);
373 iow(db
, DM9000_EPCR
, EPCR_ERPRR
);
375 spin_unlock_irqrestore(&db
->lock
, flags
);
377 dm9000_wait_eeprom(db
);
379 /* delay for at-least 150uS */
382 spin_lock_irqsave(&db
->lock
, flags
);
384 iow(db
, DM9000_EPCR
, 0x0);
386 to
[0] = ior(db
, DM9000_EPDRL
);
387 to
[1] = ior(db
, DM9000_EPDRH
);
389 spin_unlock_irqrestore(&db
->lock
, flags
);
391 mutex_unlock(&db
->addr_lock
);
395 * Write a word data to SROM
398 dm9000_write_eeprom(board_info_t
*db
, int offset
, u8
*data
)
402 if (db
->flags
& DM9000_PLATF_NO_EEPROM
)
405 mutex_lock(&db
->addr_lock
);
407 spin_lock_irqsave(&db
->lock
, flags
);
408 iow(db
, DM9000_EPAR
, offset
);
409 iow(db
, DM9000_EPDRH
, data
[1]);
410 iow(db
, DM9000_EPDRL
, data
[0]);
411 iow(db
, DM9000_EPCR
, EPCR_WEP
| EPCR_ERPRW
);
412 spin_unlock_irqrestore(&db
->lock
, flags
);
414 dm9000_wait_eeprom(db
);
416 mdelay(1); /* wait at least 150uS to clear */
418 spin_lock_irqsave(&db
->lock
, flags
);
419 iow(db
, DM9000_EPCR
, 0);
420 spin_unlock_irqrestore(&db
->lock
, flags
);
422 mutex_unlock(&db
->addr_lock
);
427 static void dm9000_get_drvinfo(struct net_device
*dev
,
428 struct ethtool_drvinfo
*info
)
430 board_info_t
*dm
= to_dm9000_board(dev
);
432 strcpy(info
->driver
, CARDNAME
);
433 strcpy(info
->version
, DRV_VERSION
);
434 strcpy(info
->bus_info
, to_platform_device(dm
->dev
)->name
);
437 static u32
dm9000_get_msglevel(struct net_device
*dev
)
439 board_info_t
*dm
= to_dm9000_board(dev
);
441 return dm
->msg_enable
;
444 static void dm9000_set_msglevel(struct net_device
*dev
, u32 value
)
446 board_info_t
*dm
= to_dm9000_board(dev
);
448 dm
->msg_enable
= value
;
451 static int dm9000_get_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
453 board_info_t
*dm
= to_dm9000_board(dev
);
455 mii_ethtool_gset(&dm
->mii
, cmd
);
459 static int dm9000_set_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
461 board_info_t
*dm
= to_dm9000_board(dev
);
463 return mii_ethtool_sset(&dm
->mii
, cmd
);
466 static int dm9000_nway_reset(struct net_device
*dev
)
468 board_info_t
*dm
= to_dm9000_board(dev
);
469 return mii_nway_restart(&dm
->mii
);
472 static uint32_t dm9000_get_rx_csum(struct net_device
*dev
)
474 board_info_t
*dm
= to_dm9000_board(dev
);
478 static int dm9000_set_rx_csum(struct net_device
*dev
, uint32_t data
)
480 board_info_t
*dm
= to_dm9000_board(dev
);
486 spin_lock_irqsave(&dm
->lock
, flags
);
487 iow(dm
, DM9000_RCSR
, dm
->rx_csum
? RCSR_CSUM
: 0);
488 spin_unlock_irqrestore(&dm
->lock
, flags
);
496 static int dm9000_set_tx_csum(struct net_device
*dev
, uint32_t data
)
498 board_info_t
*dm
= to_dm9000_board(dev
);
499 int ret
= -EOPNOTSUPP
;
502 ret
= ethtool_op_set_tx_csum(dev
, data
);
506 static u32
dm9000_get_link(struct net_device
*dev
)
508 board_info_t
*dm
= to_dm9000_board(dev
);
511 if (dm
->flags
& DM9000_PLATF_EXT_PHY
)
512 ret
= mii_link_ok(&dm
->mii
);
514 ret
= dm9000_read_locked(dm
, DM9000_NSR
) & NSR_LINKST
? 1 : 0;
519 #define DM_EEPROM_MAGIC (0x444D394B)
521 static int dm9000_get_eeprom_len(struct net_device
*dev
)
526 static int dm9000_get_eeprom(struct net_device
*dev
,
527 struct ethtool_eeprom
*ee
, u8
*data
)
529 board_info_t
*dm
= to_dm9000_board(dev
);
530 int offset
= ee
->offset
;
534 /* EEPROM access is aligned to two bytes */
536 if ((len
& 1) != 0 || (offset
& 1) != 0)
539 if (dm
->flags
& DM9000_PLATF_NO_EEPROM
)
542 ee
->magic
= DM_EEPROM_MAGIC
;
544 for (i
= 0; i
< len
; i
+= 2)
545 dm9000_read_eeprom(dm
, (offset
+ i
) / 2, data
+ i
);
550 static int dm9000_set_eeprom(struct net_device
*dev
,
551 struct ethtool_eeprom
*ee
, u8
*data
)
553 board_info_t
*dm
= to_dm9000_board(dev
);
554 int offset
= ee
->offset
;
558 /* EEPROM access is aligned to two bytes */
560 if ((len
& 1) != 0 || (offset
& 1) != 0)
563 if (dm
->flags
& DM9000_PLATF_NO_EEPROM
)
566 if (ee
->magic
!= DM_EEPROM_MAGIC
)
569 for (i
= 0; i
< len
; i
+= 2)
570 dm9000_write_eeprom(dm
, (offset
+ i
) / 2, data
+ i
);
575 static void dm9000_get_wol(struct net_device
*dev
, struct ethtool_wolinfo
*w
)
577 board_info_t
*dm
= to_dm9000_board(dev
);
579 memset(w
, 0, sizeof(struct ethtool_wolinfo
));
581 /* note, we could probably support wake-phy too */
582 w
->supported
= dm
->wake_supported
? WAKE_MAGIC
: 0;
583 w
->wolopts
= dm
->wake_state
;
586 static int dm9000_set_wol(struct net_device
*dev
, struct ethtool_wolinfo
*w
)
588 board_info_t
*dm
= to_dm9000_board(dev
);
590 u32 opts
= w
->wolopts
;
593 if (!dm
->wake_supported
)
596 if (opts
& ~WAKE_MAGIC
)
599 if (opts
& WAKE_MAGIC
)
602 mutex_lock(&dm
->addr_lock
);
604 spin_lock_irqsave(&dm
->lock
, flags
);
605 iow(dm
, DM9000_WCR
, wcr
);
606 spin_unlock_irqrestore(&dm
->lock
, flags
);
608 mutex_unlock(&dm
->addr_lock
);
610 if (dm
->wake_state
!= opts
) {
611 /* change in wol state, update IRQ state */
614 set_irq_wake(dm
->irq_wake
, 1);
615 else if (dm
->wake_state
& !opts
)
616 set_irq_wake(dm
->irq_wake
, 0);
619 dm
->wake_state
= opts
;
623 static const struct ethtool_ops dm9000_ethtool_ops
= {
624 .get_drvinfo
= dm9000_get_drvinfo
,
625 .get_settings
= dm9000_get_settings
,
626 .set_settings
= dm9000_set_settings
,
627 .get_msglevel
= dm9000_get_msglevel
,
628 .set_msglevel
= dm9000_set_msglevel
,
629 .nway_reset
= dm9000_nway_reset
,
630 .get_link
= dm9000_get_link
,
631 .get_wol
= dm9000_get_wol
,
632 .set_wol
= dm9000_set_wol
,
633 .get_eeprom_len
= dm9000_get_eeprom_len
,
634 .get_eeprom
= dm9000_get_eeprom
,
635 .set_eeprom
= dm9000_set_eeprom
,
636 .get_rx_csum
= dm9000_get_rx_csum
,
637 .set_rx_csum
= dm9000_set_rx_csum
,
638 .get_tx_csum
= ethtool_op_get_tx_csum
,
639 .set_tx_csum
= dm9000_set_tx_csum
,
642 static void dm9000_show_carrier(board_info_t
*db
,
643 unsigned carrier
, unsigned nsr
)
645 struct net_device
*ndev
= db
->ndev
;
646 unsigned ncr
= dm9000_read_locked(db
, DM9000_NCR
);
649 dev_info(db
->dev
, "%s: link up, %dMbps, %s-duplex, no LPA\n",
650 ndev
->name
, (nsr
& NSR_SPEED
) ? 10 : 100,
651 (ncr
& NCR_FDX
) ? "full" : "half");
653 dev_info(db
->dev
, "%s: link down\n", ndev
->name
);
657 dm9000_poll_work(struct work_struct
*w
)
659 struct delayed_work
*dw
= to_delayed_work(w
);
660 board_info_t
*db
= container_of(dw
, board_info_t
, phy_poll
);
661 struct net_device
*ndev
= db
->ndev
;
663 if (db
->flags
& DM9000_PLATF_SIMPLE_PHY
&&
664 !(db
->flags
& DM9000_PLATF_EXT_PHY
)) {
665 unsigned nsr
= dm9000_read_locked(db
, DM9000_NSR
);
666 unsigned old_carrier
= netif_carrier_ok(ndev
) ? 1 : 0;
667 unsigned new_carrier
;
669 new_carrier
= (nsr
& NSR_LINKST
) ? 1 : 0;
671 if (old_carrier
!= new_carrier
) {
672 if (netif_msg_link(db
))
673 dm9000_show_carrier(db
, new_carrier
, nsr
);
676 netif_carrier_off(ndev
);
678 netif_carrier_on(ndev
);
681 mii_check_media(&db
->mii
, netif_msg_link(db
), 0);
683 if (netif_running(ndev
))
684 dm9000_schedule_poll(db
);
687 /* dm9000_release_board
689 * release a board, and any mapped resources
693 dm9000_release_board(struct platform_device
*pdev
, struct board_info
*db
)
695 /* unmap our resources */
697 iounmap(db
->io_addr
);
698 iounmap(db
->io_data
);
700 /* release the resources */
702 release_resource(db
->data_req
);
705 release_resource(db
->addr_req
);
709 static unsigned char dm9000_type_to_char(enum dm9000_type type
)
712 case TYPE_DM9000E
: return 'e';
713 case TYPE_DM9000A
: return 'a';
714 case TYPE_DM9000B
: return 'b';
721 * Set DM9000 multicast address
724 dm9000_hash_table(struct net_device
*dev
)
726 board_info_t
*db
= netdev_priv(dev
);
727 struct dev_mc_list
*mcptr
;
731 u8 rcr
= RCR_DIS_LONG
| RCR_DIS_CRC
| RCR_RXEN
;
734 dm9000_dbg(db
, 1, "entering %s\n", __func__
);
736 spin_lock_irqsave(&db
->lock
, flags
);
738 for (i
= 0, oft
= DM9000_PAR
; i
< 6; i
++, oft
++)
739 iow(db
, oft
, dev
->dev_addr
[i
]);
741 /* Clear Hash Table */
742 for (i
= 0; i
< 4; i
++)
745 /* broadcast address */
746 hash_table
[3] = 0x8000;
748 if (dev
->flags
& IFF_PROMISC
)
751 if (dev
->flags
& IFF_ALLMULTI
)
754 /* the multicast address in Hash Table : 64 bits */
755 netdev_for_each_mc_addr(mcptr
, dev
) {
756 hash_val
= ether_crc_le(6, mcptr
->dmi_addr
) & 0x3f;
757 hash_table
[hash_val
/ 16] |= (u16
) 1 << (hash_val
% 16);
760 /* Write the hash table to MAC MD table */
761 for (i
= 0, oft
= DM9000_MAR
; i
< 4; i
++) {
762 iow(db
, oft
++, hash_table
[i
]);
763 iow(db
, oft
++, hash_table
[i
] >> 8);
766 iow(db
, DM9000_RCR
, rcr
);
767 spin_unlock_irqrestore(&db
->lock
, flags
);
771 * Initilize dm9000 board
774 dm9000_init_dm9000(struct net_device
*dev
)
776 board_info_t
*db
= netdev_priv(dev
);
780 dm9000_dbg(db
, 1, "entering %s\n", __func__
);
783 db
->io_mode
= ior(db
, DM9000_ISR
) >> 6; /* ISR bit7:6 keeps I/O mode */
786 dm9000_set_rx_csum(dev
, db
->rx_csum
);
788 /* GPIO0 on pre-activate PHY */
789 iow(db
, DM9000_GPR
, 0); /* REG_1F bit0 activate phyxcer */
790 iow(db
, DM9000_GPCR
, GPCR_GEP_CNTL
); /* Let GPIO0 output */
791 iow(db
, DM9000_GPR
, 0); /* Enable PHY */
793 ncr
= (db
->flags
& DM9000_PLATF_EXT_PHY
) ? NCR_EXT_PHY
: 0;
795 /* if wol is needed, then always set NCR_WAKEEN otherwise we end
796 * up dumping the wake events if we disable this. There is already
797 * a wake-mask in DM9000_WCR */
798 if (db
->wake_supported
)
801 iow(db
, DM9000_NCR
, ncr
);
803 /* Program operating register */
804 iow(db
, DM9000_TCR
, 0); /* TX Polling clear */
805 iow(db
, DM9000_BPTR
, 0x3f); /* Less 3Kb, 200us */
806 iow(db
, DM9000_FCR
, 0xff); /* Flow Control */
807 iow(db
, DM9000_SMCR
, 0); /* Special Mode */
808 /* clear TX status */
809 iow(db
, DM9000_NSR
, NSR_WAKEST
| NSR_TX2END
| NSR_TX1END
);
810 iow(db
, DM9000_ISR
, ISR_CLR_STATUS
); /* Clear interrupt status */
812 /* Set address filter table */
813 dm9000_hash_table(dev
);
815 imr
= IMR_PAR
| IMR_PTM
| IMR_PRM
;
816 if (db
->type
!= TYPE_DM9000E
)
821 /* Enable TX/RX interrupt mask */
822 iow(db
, DM9000_IMR
, imr
);
824 /* Init Driver variable */
826 db
->queue_pkt_len
= 0;
827 dev
->trans_start
= 0;
830 /* Our watchdog timed out. Called by the networking layer */
831 static void dm9000_timeout(struct net_device
*dev
)
833 board_info_t
*db
= netdev_priv(dev
);
837 /* Save previous register address */
838 reg_save
= readb(db
->io_addr
);
839 spin_lock_irqsave(&db
->lock
, flags
);
841 netif_stop_queue(dev
);
843 dm9000_init_dm9000(dev
);
844 /* We can accept TX packets again */
845 dev
->trans_start
= jiffies
;
846 netif_wake_queue(dev
);
848 /* Restore previous register address */
849 writeb(reg_save
, db
->io_addr
);
850 spin_unlock_irqrestore(&db
->lock
, flags
);
853 static void dm9000_send_packet(struct net_device
*dev
,
857 board_info_t
*dm
= to_dm9000_board(dev
);
859 /* The DM9000 is not smart enough to leave fragmented packets alone. */
860 if (dm
->ip_summed
!= ip_summed
) {
861 if (ip_summed
== CHECKSUM_NONE
)
862 iow(dm
, DM9000_TCCR
, 0);
864 iow(dm
, DM9000_TCCR
, TCCR_IP
| TCCR_UDP
| TCCR_TCP
);
865 dm
->ip_summed
= ip_summed
;
868 /* Set TX length to DM9000 */
869 iow(dm
, DM9000_TXPLL
, pkt_len
);
870 iow(dm
, DM9000_TXPLH
, pkt_len
>> 8);
872 /* Issue TX polling command */
873 iow(dm
, DM9000_TCR
, TCR_TXREQ
); /* Cleared after TX complete */
877 * Hardware start transmission.
878 * Send a packet to media from the upper layer.
881 dm9000_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
884 board_info_t
*db
= netdev_priv(dev
);
886 dm9000_dbg(db
, 3, "%s:\n", __func__
);
888 if (db
->tx_pkt_cnt
> 1)
889 return NETDEV_TX_BUSY
;
891 spin_lock_irqsave(&db
->lock
, flags
);
893 /* Move data to DM9000 TX RAM */
894 writeb(DM9000_MWCMD
, db
->io_addr
);
896 (db
->outblk
)(db
->io_data
, skb
->data
, skb
->len
);
897 dev
->stats
.tx_bytes
+= skb
->len
;
900 /* TX control: First packet immediately send, second packet queue */
901 if (db
->tx_pkt_cnt
== 1) {
902 dm9000_send_packet(dev
, skb
->ip_summed
, skb
->len
);
905 db
->queue_pkt_len
= skb
->len
;
906 db
->queue_ip_summed
= skb
->ip_summed
;
907 netif_stop_queue(dev
);
910 spin_unlock_irqrestore(&db
->lock
, flags
);
919 * DM9000 interrupt handler
920 * receive the packet to upper layer, free the transmitted packet
923 static void dm9000_tx_done(struct net_device
*dev
, board_info_t
*db
)
925 int tx_status
= ior(db
, DM9000_NSR
); /* Got TX status */
927 if (tx_status
& (NSR_TX2END
| NSR_TX1END
)) {
928 /* One packet sent complete */
930 dev
->stats
.tx_packets
++;
932 if (netif_msg_tx_done(db
))
933 dev_dbg(db
->dev
, "tx done, NSR %02x\n", tx_status
);
935 /* Queue packet check & send */
936 if (db
->tx_pkt_cnt
> 0)
937 dm9000_send_packet(dev
, db
->queue_ip_summed
,
939 netif_wake_queue(dev
);
943 struct dm9000_rxhdr
{
947 } __attribute__((__packed__
));
950 * Received a packet and pass to upper layer
953 dm9000_rx(struct net_device
*dev
)
955 board_info_t
*db
= netdev_priv(dev
);
956 struct dm9000_rxhdr rxhdr
;
962 /* Check packet ready or not */
964 ior(db
, DM9000_MRCMDX
); /* Dummy read */
966 /* Get most updated data */
967 rxbyte
= readb(db
->io_data
);
969 /* Status check: this byte must be 0 or 1 */
970 if (rxbyte
& DM9000_PKT_ERR
) {
971 dev_warn(db
->dev
, "status check fail: %d\n", rxbyte
);
972 iow(db
, DM9000_RCR
, 0x00); /* Stop Device */
973 iow(db
, DM9000_ISR
, IMR_PAR
); /* Stop INT request */
977 if (!(rxbyte
& DM9000_PKT_RDY
))
980 /* A packet ready now & Get status/length */
982 writeb(DM9000_MRCMD
, db
->io_addr
);
984 (db
->inblk
)(db
->io_data
, &rxhdr
, sizeof(rxhdr
));
986 RxLen
= le16_to_cpu(rxhdr
.RxLen
);
988 if (netif_msg_rx_status(db
))
989 dev_dbg(db
->dev
, "RX: status %02x, length %04x\n",
990 rxhdr
.RxStatus
, RxLen
);
992 /* Packet Status check */
995 if (netif_msg_rx_err(db
))
996 dev_dbg(db
->dev
, "RX: Bad Packet (runt)\n");
999 if (RxLen
> DM9000_PKT_MAX
) {
1000 dev_dbg(db
->dev
, "RST: RX Len:%x\n", RxLen
);
1003 /* rxhdr.RxStatus is identical to RSR register. */
1004 if (rxhdr
.RxStatus
& (RSR_FOE
| RSR_CE
| RSR_AE
|
1005 RSR_PLE
| RSR_RWTO
|
1006 RSR_LCS
| RSR_RF
)) {
1008 if (rxhdr
.RxStatus
& RSR_FOE
) {
1009 if (netif_msg_rx_err(db
))
1010 dev_dbg(db
->dev
, "fifo error\n");
1011 dev
->stats
.rx_fifo_errors
++;
1013 if (rxhdr
.RxStatus
& RSR_CE
) {
1014 if (netif_msg_rx_err(db
))
1015 dev_dbg(db
->dev
, "crc error\n");
1016 dev
->stats
.rx_crc_errors
++;
1018 if (rxhdr
.RxStatus
& RSR_RF
) {
1019 if (netif_msg_rx_err(db
))
1020 dev_dbg(db
->dev
, "length error\n");
1021 dev
->stats
.rx_length_errors
++;
1025 /* Move data from DM9000 */
1027 ((skb
= dev_alloc_skb(RxLen
+ 4)) != NULL
)) {
1028 skb_reserve(skb
, 2);
1029 rdptr
= (u8
*) skb_put(skb
, RxLen
- 4);
1031 /* Read received packet from RX SRAM */
1033 (db
->inblk
)(db
->io_data
, rdptr
, RxLen
);
1034 dev
->stats
.rx_bytes
+= RxLen
;
1036 /* Pass to upper layer */
1037 skb
->protocol
= eth_type_trans(skb
, dev
);
1039 if ((((rxbyte
& 0x1c) << 3) & rxbyte
) == 0)
1040 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1042 skb
->ip_summed
= CHECKSUM_NONE
;
1045 dev
->stats
.rx_packets
++;
1048 /* need to dump the packet's data */
1050 (db
->dumpblk
)(db
->io_data
, RxLen
);
1052 } while (rxbyte
& DM9000_PKT_RDY
);
1055 static irqreturn_t
dm9000_interrupt(int irq
, void *dev_id
)
1057 struct net_device
*dev
= dev_id
;
1058 board_info_t
*db
= netdev_priv(dev
);
1060 unsigned long flags
;
1063 dm9000_dbg(db
, 3, "entering %s\n", __func__
);
1065 /* A real interrupt coming */
1067 /* holders of db->lock must always block IRQs */
1068 spin_lock_irqsave(&db
->lock
, flags
);
1070 /* Save previous register address */
1071 reg_save
= readb(db
->io_addr
);
1073 /* Disable all interrupts */
1074 iow(db
, DM9000_IMR
, IMR_PAR
);
1076 /* Got DM9000 interrupt status */
1077 int_status
= ior(db
, DM9000_ISR
); /* Got ISR */
1078 iow(db
, DM9000_ISR
, int_status
); /* Clear ISR status */
1080 if (netif_msg_intr(db
))
1081 dev_dbg(db
->dev
, "interrupt status %02x\n", int_status
);
1083 /* Received the coming packet */
1084 if (int_status
& ISR_PRS
)
1087 /* Trnasmit Interrupt check */
1088 if (int_status
& ISR_PTS
)
1089 dm9000_tx_done(dev
, db
);
1091 if (db
->type
!= TYPE_DM9000E
) {
1092 if (int_status
& ISR_LNKCHNG
) {
1093 /* fire a link-change request */
1094 schedule_delayed_work(&db
->phy_poll
, 1);
1098 /* Re-enable interrupt mask */
1099 iow(db
, DM9000_IMR
, db
->imr_all
);
1101 /* Restore previous register address */
1102 writeb(reg_save
, db
->io_addr
);
1104 spin_unlock_irqrestore(&db
->lock
, flags
);
1109 static irqreturn_t
dm9000_wol_interrupt(int irq
, void *dev_id
)
1111 struct net_device
*dev
= dev_id
;
1112 board_info_t
*db
= netdev_priv(dev
);
1113 unsigned long flags
;
1116 spin_lock_irqsave(&db
->lock
, flags
);
1118 nsr
= ior(db
, DM9000_NSR
);
1119 wcr
= ior(db
, DM9000_WCR
);
1121 dev_dbg(db
->dev
, "%s: NSR=0x%02x, WCR=0x%02x\n", __func__
, nsr
, wcr
);
1123 if (nsr
& NSR_WAKEST
) {
1124 /* clear, so we can avoid */
1125 iow(db
, DM9000_NSR
, NSR_WAKEST
);
1127 if (wcr
& WCR_LINKST
)
1128 dev_info(db
->dev
, "wake by link status change\n");
1129 if (wcr
& WCR_SAMPLEST
)
1130 dev_info(db
->dev
, "wake by sample packet\n");
1131 if (wcr
& WCR_MAGICST
)
1132 dev_info(db
->dev
, "wake by magic packet\n");
1133 if (!(wcr
& (WCR_LINKST
| WCR_SAMPLEST
| WCR_MAGICST
)))
1134 dev_err(db
->dev
, "wake signalled with no reason? "
1135 "NSR=0x%02x, WSR=0x%02x\n", nsr
, wcr
);
1139 spin_unlock_irqrestore(&db
->lock
, flags
);
1141 return (nsr
& NSR_WAKEST
) ? IRQ_HANDLED
: IRQ_NONE
;
1144 #ifdef CONFIG_NET_POLL_CONTROLLER
1148 static void dm9000_poll_controller(struct net_device
*dev
)
1150 disable_irq(dev
->irq
);
1151 dm9000_interrupt(dev
->irq
, dev
);
1152 enable_irq(dev
->irq
);
1157 * Open the interface.
1158 * The interface is opened whenever "ifconfig" actives it.
1161 dm9000_open(struct net_device
*dev
)
1163 board_info_t
*db
= netdev_priv(dev
);
1164 unsigned long irqflags
= db
->irq_res
->flags
& IRQF_TRIGGER_MASK
;
1166 if (netif_msg_ifup(db
))
1167 dev_dbg(db
->dev
, "enabling %s\n", dev
->name
);
1169 /* If there is no IRQ type specified, default to something that
1170 * may work, and tell the user that this is a problem */
1172 if (irqflags
== IRQF_TRIGGER_NONE
)
1173 dev_warn(db
->dev
, "WARNING: no IRQ resource flags set.\n");
1175 irqflags
|= IRQF_SHARED
;
1177 if (request_irq(dev
->irq
, dm9000_interrupt
, irqflags
, dev
->name
, dev
))
1180 /* Initialize DM9000 board */
1182 dm9000_init_dm9000(dev
);
1184 /* Init driver variable */
1187 mii_check_media(&db
->mii
, netif_msg_link(db
), 1);
1188 netif_start_queue(dev
);
1190 dm9000_schedule_poll(db
);
1196 * Sleep, either by using msleep() or if we are suspending, then
1197 * use mdelay() to sleep.
1199 static void dm9000_msleep(board_info_t
*db
, unsigned int ms
)
1208 * Read a word from phyxcer
1211 dm9000_phy_read(struct net_device
*dev
, int phy_reg_unused
, int reg
)
1213 board_info_t
*db
= netdev_priv(dev
);
1214 unsigned long flags
;
1215 unsigned int reg_save
;
1218 mutex_lock(&db
->addr_lock
);
1220 spin_lock_irqsave(&db
->lock
,flags
);
1222 /* Save previous register address */
1223 reg_save
= readb(db
->io_addr
);
1225 /* Fill the phyxcer register into REG_0C */
1226 iow(db
, DM9000_EPAR
, DM9000_PHY
| reg
);
1228 iow(db
, DM9000_EPCR
, EPCR_ERPRR
| EPCR_EPOS
); /* Issue phyxcer read command */
1230 writeb(reg_save
, db
->io_addr
);
1231 spin_unlock_irqrestore(&db
->lock
,flags
);
1233 dm9000_msleep(db
, 1); /* Wait read complete */
1235 spin_lock_irqsave(&db
->lock
,flags
);
1236 reg_save
= readb(db
->io_addr
);
1238 iow(db
, DM9000_EPCR
, 0x0); /* Clear phyxcer read command */
1240 /* The read data keeps on REG_0D & REG_0E */
1241 ret
= (ior(db
, DM9000_EPDRH
) << 8) | ior(db
, DM9000_EPDRL
);
1243 /* restore the previous address */
1244 writeb(reg_save
, db
->io_addr
);
1245 spin_unlock_irqrestore(&db
->lock
,flags
);
1247 mutex_unlock(&db
->addr_lock
);
1249 dm9000_dbg(db
, 5, "phy_read[%02x] -> %04x\n", reg
, ret
);
1254 * Write a word to phyxcer
1257 dm9000_phy_write(struct net_device
*dev
,
1258 int phyaddr_unused
, int reg
, int value
)
1260 board_info_t
*db
= netdev_priv(dev
);
1261 unsigned long flags
;
1262 unsigned long reg_save
;
1264 dm9000_dbg(db
, 5, "phy_write[%02x] = %04x\n", reg
, value
);
1265 mutex_lock(&db
->addr_lock
);
1267 spin_lock_irqsave(&db
->lock
,flags
);
1269 /* Save previous register address */
1270 reg_save
= readb(db
->io_addr
);
1272 /* Fill the phyxcer register into REG_0C */
1273 iow(db
, DM9000_EPAR
, DM9000_PHY
| reg
);
1275 /* Fill the written data into REG_0D & REG_0E */
1276 iow(db
, DM9000_EPDRL
, value
);
1277 iow(db
, DM9000_EPDRH
, value
>> 8);
1279 iow(db
, DM9000_EPCR
, EPCR_EPOS
| EPCR_ERPRW
); /* Issue phyxcer write command */
1281 writeb(reg_save
, db
->io_addr
);
1282 spin_unlock_irqrestore(&db
->lock
, flags
);
1284 dm9000_msleep(db
, 1); /* Wait write complete */
1286 spin_lock_irqsave(&db
->lock
,flags
);
1287 reg_save
= readb(db
->io_addr
);
1289 iow(db
, DM9000_EPCR
, 0x0); /* Clear phyxcer write command */
1291 /* restore the previous address */
1292 writeb(reg_save
, db
->io_addr
);
1294 spin_unlock_irqrestore(&db
->lock
, flags
);
1295 mutex_unlock(&db
->addr_lock
);
1299 dm9000_shutdown(struct net_device
*dev
)
1301 board_info_t
*db
= netdev_priv(dev
);
1304 dm9000_phy_write(dev
, 0, MII_BMCR
, BMCR_RESET
); /* PHY RESET */
1305 iow(db
, DM9000_GPR
, 0x01); /* Power-Down PHY */
1306 iow(db
, DM9000_IMR
, IMR_PAR
); /* Disable all interrupt */
1307 iow(db
, DM9000_RCR
, 0x00); /* Disable RX */
1311 * Stop the interface.
1312 * The interface is stopped when it is brought.
1315 dm9000_stop(struct net_device
*ndev
)
1317 board_info_t
*db
= netdev_priv(ndev
);
1319 if (netif_msg_ifdown(db
))
1320 dev_dbg(db
->dev
, "shutting down %s\n", ndev
->name
);
1322 cancel_delayed_work_sync(&db
->phy_poll
);
1324 netif_stop_queue(ndev
);
1325 netif_carrier_off(ndev
);
1327 /* free interrupt */
1328 free_irq(ndev
->irq
, ndev
);
1330 dm9000_shutdown(ndev
);
1335 static const struct net_device_ops dm9000_netdev_ops
= {
1336 .ndo_open
= dm9000_open
,
1337 .ndo_stop
= dm9000_stop
,
1338 .ndo_start_xmit
= dm9000_start_xmit
,
1339 .ndo_tx_timeout
= dm9000_timeout
,
1340 .ndo_set_multicast_list
= dm9000_hash_table
,
1341 .ndo_do_ioctl
= dm9000_ioctl
,
1342 .ndo_change_mtu
= eth_change_mtu
,
1343 .ndo_validate_addr
= eth_validate_addr
,
1344 .ndo_set_mac_address
= eth_mac_addr
,
1345 #ifdef CONFIG_NET_POLL_CONTROLLER
1346 .ndo_poll_controller
= dm9000_poll_controller
,
1351 * Search DM9000 board, allocate space and register it
1353 static int __devinit
1354 dm9000_probe(struct platform_device
*pdev
)
1356 struct dm9000_plat_data
*pdata
= pdev
->dev
.platform_data
;
1357 struct board_info
*db
; /* Point a board information structure */
1358 struct net_device
*ndev
;
1359 const unsigned char *mac_src
;
1365 /* Init network device */
1366 ndev
= alloc_etherdev(sizeof(struct board_info
));
1368 dev_err(&pdev
->dev
, "could not allocate device.\n");
1372 SET_NETDEV_DEV(ndev
, &pdev
->dev
);
1374 dev_dbg(&pdev
->dev
, "dm9000_probe()\n");
1376 /* setup board info structure */
1377 db
= netdev_priv(ndev
);
1379 db
->dev
= &pdev
->dev
;
1382 spin_lock_init(&db
->lock
);
1383 mutex_init(&db
->addr_lock
);
1385 INIT_DELAYED_WORK(&db
->phy_poll
, dm9000_poll_work
);
1387 db
->addr_res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1388 db
->data_res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 1);
1389 db
->irq_res
= platform_get_resource(pdev
, IORESOURCE_IRQ
, 0);
1391 if (db
->addr_res
== NULL
|| db
->data_res
== NULL
||
1392 db
->irq_res
== NULL
) {
1393 dev_err(db
->dev
, "insufficient resources\n");
1398 db
->irq_wake
= platform_get_irq(pdev
, 1);
1399 if (db
->irq_wake
>= 0) {
1400 dev_dbg(db
->dev
, "wakeup irq %d\n", db
->irq_wake
);
1402 ret
= request_irq(db
->irq_wake
, dm9000_wol_interrupt
,
1403 IRQF_SHARED
, dev_name(db
->dev
), ndev
);
1405 dev_err(db
->dev
, "cannot get wakeup irq (%d)\n", ret
);
1408 /* test to see if irq is really wakeup capable */
1409 ret
= set_irq_wake(db
->irq_wake
, 1);
1411 dev_err(db
->dev
, "irq %d cannot set wakeup (%d)\n",
1415 set_irq_wake(db
->irq_wake
, 0);
1416 db
->wake_supported
= 1;
1421 iosize
= resource_size(db
->addr_res
);
1422 db
->addr_req
= request_mem_region(db
->addr_res
->start
, iosize
,
1425 if (db
->addr_req
== NULL
) {
1426 dev_err(db
->dev
, "cannot claim address reg area\n");
1431 db
->io_addr
= ioremap(db
->addr_res
->start
, iosize
);
1433 if (db
->io_addr
== NULL
) {
1434 dev_err(db
->dev
, "failed to ioremap address reg\n");
1439 iosize
= resource_size(db
->data_res
);
1440 db
->data_req
= request_mem_region(db
->data_res
->start
, iosize
,
1443 if (db
->data_req
== NULL
) {
1444 dev_err(db
->dev
, "cannot claim data reg area\n");
1449 db
->io_data
= ioremap(db
->data_res
->start
, iosize
);
1451 if (db
->io_data
== NULL
) {
1452 dev_err(db
->dev
, "failed to ioremap data reg\n");
1457 /* fill in parameters for net-dev structure */
1458 ndev
->base_addr
= (unsigned long)db
->io_addr
;
1459 ndev
->irq
= db
->irq_res
->start
;
1461 /* ensure at least we have a default set of IO routines */
1462 dm9000_set_io(db
, iosize
);
1464 /* check to see if anything is being over-ridden */
1465 if (pdata
!= NULL
) {
1466 /* check to see if the driver wants to over-ride the
1467 * default IO width */
1469 if (pdata
->flags
& DM9000_PLATF_8BITONLY
)
1470 dm9000_set_io(db
, 1);
1472 if (pdata
->flags
& DM9000_PLATF_16BITONLY
)
1473 dm9000_set_io(db
, 2);
1475 if (pdata
->flags
& DM9000_PLATF_32BITONLY
)
1476 dm9000_set_io(db
, 4);
1478 /* check to see if there are any IO routine
1481 if (pdata
->inblk
!= NULL
)
1482 db
->inblk
= pdata
->inblk
;
1484 if (pdata
->outblk
!= NULL
)
1485 db
->outblk
= pdata
->outblk
;
1487 if (pdata
->dumpblk
!= NULL
)
1488 db
->dumpblk
= pdata
->dumpblk
;
1490 db
->flags
= pdata
->flags
;
1493 #ifdef CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL
1494 db
->flags
|= DM9000_PLATF_SIMPLE_PHY
;
1499 /* try multiple times, DM9000 sometimes gets the read wrong */
1500 for (i
= 0; i
< 8; i
++) {
1501 id_val
= ior(db
, DM9000_VIDL
);
1502 id_val
|= (u32
)ior(db
, DM9000_VIDH
) << 8;
1503 id_val
|= (u32
)ior(db
, DM9000_PIDL
) << 16;
1504 id_val
|= (u32
)ior(db
, DM9000_PIDH
) << 24;
1506 if (id_val
== DM9000_ID
)
1508 dev_err(db
->dev
, "read wrong id 0x%08x\n", id_val
);
1511 if (id_val
!= DM9000_ID
) {
1512 dev_err(db
->dev
, "wrong id: 0x%08x\n", id_val
);
1517 /* Identify what type of DM9000 we are working on */
1519 id_val
= ior(db
, DM9000_CHIPR
);
1520 dev_dbg(db
->dev
, "dm9000 revision 0x%02x\n", id_val
);
1524 db
->type
= TYPE_DM9000A
;
1527 db
->type
= TYPE_DM9000B
;
1530 dev_dbg(db
->dev
, "ID %02x => defaulting to DM9000E\n", id_val
);
1531 db
->type
= TYPE_DM9000E
;
1534 /* dm9000a/b are capable of hardware checksum offload */
1535 if (db
->type
== TYPE_DM9000A
|| db
->type
== TYPE_DM9000B
) {
1538 ndev
->features
|= NETIF_F_IP_CSUM
;
1541 /* from this point we assume that we have found a DM9000 */
1543 /* driver system function */
1546 ndev
->netdev_ops
= &dm9000_netdev_ops
;
1547 ndev
->watchdog_timeo
= msecs_to_jiffies(watchdog
);
1548 ndev
->ethtool_ops
= &dm9000_ethtool_ops
;
1550 db
->msg_enable
= NETIF_MSG_LINK
;
1551 db
->mii
.phy_id_mask
= 0x1f;
1552 db
->mii
.reg_num_mask
= 0x1f;
1553 db
->mii
.force_media
= 0;
1554 db
->mii
.full_duplex
= 0;
1556 db
->mii
.mdio_read
= dm9000_phy_read
;
1557 db
->mii
.mdio_write
= dm9000_phy_write
;
1561 /* try reading the node address from the attached EEPROM */
1562 for (i
= 0; i
< 6; i
+= 2)
1563 dm9000_read_eeprom(db
, i
/ 2, ndev
->dev_addr
+i
);
1565 if (!is_valid_ether_addr(ndev
->dev_addr
) && pdata
!= NULL
) {
1566 mac_src
= "platform data";
1567 memcpy(ndev
->dev_addr
, pdata
->dev_addr
, 6);
1570 if (!is_valid_ether_addr(ndev
->dev_addr
)) {
1571 /* try reading from mac */
1574 for (i
= 0; i
< 6; i
++)
1575 ndev
->dev_addr
[i
] = ior(db
, i
+DM9000_PAR
);
1578 if (!is_valid_ether_addr(ndev
->dev_addr
))
1579 dev_warn(db
->dev
, "%s: Invalid ethernet MAC address. Please "
1580 "set using ifconfig\n", ndev
->name
);
1582 platform_set_drvdata(pdev
, ndev
);
1583 ret
= register_netdev(ndev
);
1586 printk(KERN_INFO
"%s: dm9000%c at %p,%p IRQ %d MAC: %pM (%s)\n",
1587 ndev
->name
, dm9000_type_to_char(db
->type
),
1588 db
->io_addr
, db
->io_data
, ndev
->irq
,
1589 ndev
->dev_addr
, mac_src
);
1593 dev_err(db
->dev
, "not found (%d).\n", ret
);
1595 dm9000_release_board(pdev
, db
);
1602 dm9000_drv_suspend(struct device
*dev
)
1604 struct platform_device
*pdev
= to_platform_device(dev
);
1605 struct net_device
*ndev
= platform_get_drvdata(pdev
);
1609 db
= netdev_priv(ndev
);
1612 if (!netif_running(ndev
))
1615 netif_device_detach(ndev
);
1617 /* only shutdown if not using WoL */
1618 if (!db
->wake_state
)
1619 dm9000_shutdown(ndev
);
1625 dm9000_drv_resume(struct device
*dev
)
1627 struct platform_device
*pdev
= to_platform_device(dev
);
1628 struct net_device
*ndev
= platform_get_drvdata(pdev
);
1629 board_info_t
*db
= netdev_priv(ndev
);
1632 if (netif_running(ndev
)) {
1633 /* reset if we were not in wake mode to ensure if
1634 * the device was powered off it is in a known state */
1635 if (!db
->wake_state
) {
1637 dm9000_init_dm9000(ndev
);
1640 netif_device_attach(ndev
);
1648 static const struct dev_pm_ops dm9000_drv_pm_ops
= {
1649 .suspend
= dm9000_drv_suspend
,
1650 .resume
= dm9000_drv_resume
,
1653 static int __devexit
1654 dm9000_drv_remove(struct platform_device
*pdev
)
1656 struct net_device
*ndev
= platform_get_drvdata(pdev
);
1658 platform_set_drvdata(pdev
, NULL
);
1660 unregister_netdev(ndev
);
1661 dm9000_release_board(pdev
, (board_info_t
*) netdev_priv(ndev
));
1662 free_netdev(ndev
); /* free device structure */
1664 dev_dbg(&pdev
->dev
, "released and freed device\n");
1668 static struct platform_driver dm9000_driver
= {
1671 .owner
= THIS_MODULE
,
1672 .pm
= &dm9000_drv_pm_ops
,
1674 .probe
= dm9000_probe
,
1675 .remove
= __devexit_p(dm9000_drv_remove
),
1681 printk(KERN_INFO
"%s Ethernet Driver, V%s\n", CARDNAME
, DRV_VERSION
);
1683 return platform_driver_register(&dm9000_driver
);
1687 dm9000_cleanup(void)
1689 platform_driver_unregister(&dm9000_driver
);
1692 module_init(dm9000_init
);
1693 module_exit(dm9000_cleanup
);
1695 MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
1696 MODULE_DESCRIPTION("Davicom DM9000 network driver");
1697 MODULE_LICENSE("GPL");
1698 MODULE_ALIAS("platform:dm9000");