Linux 2.6.33

[pohmelfs.git] / arch / arm / mach-omap2 / dpll.c

/*
 * OMAP3/4 - specific DPLL control functions
 *
 * Copyright (C) 2009 Texas Instruments, Inc.
 * Copyright (C) 2009 Nokia Corporation
 *
 * Written by Paul Walmsley
 * Testing and integration fixes by Jouni Högander
 *
 * Parts of this code are based on code written by
 * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/limits.h>
#include <linux/bitops.h>

#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <asm/div64.h>
#include <asm/clkdev.h>

#include "clock.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"

/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE                   0x0
#define DPLL_AUTOIDLE_LOW_POWER_STOP            0x1

#define MAX_DPLL_WAIT_TRIES             1000000


/**
 * omap3_dpll_recalc - recalculate DPLL rate
 * @clk: DPLL struct clk
 *
 * Recalculate and propagate the DPLL rate.
 */
unsigned long omap3_dpll_recalc(struct clk *clk)
{
        return omap2_get_dpll_rate(clk);
}

/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
{
        const struct dpll_data *dd;
        u32 v;

        dd = clk->dpll_data;

        v = __raw_readl(dd->control_reg);
        v &= ~dd->enable_mask;
        v |= clken_bits << __ffs(dd->enable_mask);
        __raw_writel(v, dd->control_reg);
}

/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
{
        const struct dpll_data *dd;
        int i = 0;
        int ret = -EINVAL;

        dd = clk->dpll_data;

        state <<= __ffs(dd->idlest_mask);

        while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
               i < MAX_DPLL_WAIT_TRIES) {
                i++;
                udelay(1);
        }

        if (i == MAX_DPLL_WAIT_TRIES) {
                printk(KERN_ERR "clock: %s failed transition to '%s'\n",
                       clk->name, (state) ? "locked" : "bypassed");
        } else {
                pr_debug("clock: %s transition to '%s' in %d loops\n",
                         clk->name, (state) ? "locked" : "bypassed", i);

                ret = 0;
        }

        return ret;
}

/* From 3430 TRM ES2 4.7.6.2 */
static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
{
        unsigned long fint;
        u16 f = 0;

        fint = clk->dpll_data->clk_ref->rate / n;

        pr_debug("clock: fint is %lu\n", fint);

        if (fint >= 750000 && fint <= 1000000)
                f = 0x3;
        else if (fint > 1000000 && fint <= 1250000)
                f = 0x4;
        else if (fint > 1250000 && fint <= 1500000)
                f = 0x5;
        else if (fint > 1500000 && fint <= 1750000)
                f = 0x6;
        else if (fint > 1750000 && fint <= 2100000)
                f = 0x7;
        else if (fint > 7500000 && fint <= 10000000)
                f = 0xB;
        else if (fint > 10000000 && fint <= 12500000)
                f = 0xC;
        else if (fint > 12500000 && fint <= 15000000)
                f = 0xD;
        else if (fint > 15000000 && fint <= 17500000)
                f = 0xE;
        else if (fint > 17500000 && fint <= 21000000)
                f = 0xF;
        else
                pr_debug("clock: unknown freqsel setting for %d\n", n);

        return f;
}

/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */

/*
 * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
 * @clk: pointer to a DPLL struct clk
 *
 * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
 * readiness before returning.  Will save and restore the DPLL's
 * autoidle state across the enable, per the CDP code.  If the DPLL
 * locked successfully, return 0; if the DPLL did not lock in the time
 * allotted, or DPLL3 was passed in, return -EINVAL.
 */
static int _omap3_noncore_dpll_lock(struct clk *clk)
{
        u8 ai;
        int r;

        pr_debug("clock: locking DPLL %s\n", clk->name);

        ai = omap3_dpll_autoidle_read(clk);

        omap3_dpll_deny_idle(clk);

        _omap3_dpll_write_clken(clk, DPLL_LOCKED);

        r = _omap3_wait_dpll_status(clk, 1);

        if (ai)
                omap3_dpll_allow_idle(clk);

        return r;
}

/*
 * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
 * @clk: pointer to a DPLL struct clk
 *
 * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
 * bypass mode, the DPLL's rate is set equal to its parent clock's
 * rate.  Waits for the DPLL to report readiness before returning.
 * Will save and restore the DPLL's autoidle state across the enable,
 * per the CDP code.  If the DPLL entered bypass mode successfully,
 * return 0; if the DPLL did not enter bypass in the time allotted, or
 * DPLL3 was passed in, or the DPLL does not support low-power bypass,
 * return -EINVAL.
 */
static int _omap3_noncore_dpll_bypass(struct clk *clk)
{
        int r;
        u8 ai;

        if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
                return -EINVAL;

        pr_debug("clock: configuring DPLL %s for low-power bypass\n",
                 clk->name);

        ai = omap3_dpll_autoidle_read(clk);

        _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);

        r = _omap3_wait_dpll_status(clk, 0);

        if (ai)
                omap3_dpll_allow_idle(clk);
        else
                omap3_dpll_deny_idle(clk);

        return r;
}

/*
 * _omap3_noncore_dpll_stop - instruct a DPLL to stop
 * @clk: pointer to a DPLL struct clk
 *
 * Instructs a non-CORE DPLL to enter low-power stop. Will save and
 * restore the DPLL's autoidle state across the stop, per the CDP
 * code.  If DPLL3 was passed in, or the DPLL does not support
 * low-power stop, return -EINVAL; otherwise, return 0.
 */
static int _omap3_noncore_dpll_stop(struct clk *clk)
{
        u8 ai;

        if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
                return -EINVAL;

        pr_debug("clock: stopping DPLL %s\n", clk->name);

        ai = omap3_dpll_autoidle_read(clk);

        _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);

        if (ai)
                omap3_dpll_allow_idle(clk);
        else
                omap3_dpll_deny_idle(clk);

        return 0;
}

/**
 * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
 * @clk: pointer to a DPLL struct clk
 *
 * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
 * The choice of modes depends on the DPLL's programmed rate: if it is
 * the same as the DPLL's parent clock, it will enter bypass;
 * otherwise, it will enter lock.  This code will wait for the DPLL to
 * indicate readiness before returning, unless the DPLL takes too long
 * to enter the target state.  Intended to be used as the struct clk's
 * enable function.  If DPLL3 was passed in, or the DPLL does not
 * support low-power stop, or if the DPLL took too long to enter
 * bypass or lock, return -EINVAL; otherwise, return 0.
 */
int omap3_noncore_dpll_enable(struct clk *clk)
{
        int r;
        struct dpll_data *dd;

        dd = clk->dpll_data;
        if (!dd)
                return -EINVAL;

        if (clk->rate == dd->clk_bypass->rate) {
                WARN_ON(clk->parent != dd->clk_bypass);
                r = _omap3_noncore_dpll_bypass(clk);
        } else {
                WARN_ON(clk->parent != dd->clk_ref);
                r = _omap3_noncore_dpll_lock(clk);
        }
        /*
         *FIXME: this is dubious - if clk->rate has changed, what about
         * propagating?
         */
        if (!r)
                clk->rate = omap2_get_dpll_rate(clk);

        return r;
}

/**
 * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
 * @clk: pointer to a DPLL struct clk
 *
 * Instructs a non-CORE DPLL to enter low-power stop.  This function is
 * intended for use in struct clkops.  No return value.
 */
void omap3_noncore_dpll_disable(struct clk *clk)
{
        _omap3_noncore_dpll_stop(clk);
}


/* Non-CORE DPLL rate set code */

/*
 * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
 * @clk: struct clk * of DPLL to set
 * @m: DPLL multiplier to set
 * @n: DPLL divider to set
 * @freqsel: FREQSEL value to set
 *
 * Program the DPLL with the supplied M, N values, and wait for the DPLL to
 * lock..  Returns -EINVAL upon error, or 0 upon success.
 */
int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
{
        struct dpll_data *dd = clk->dpll_data;
        u32 v;

        /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
        _omap3_noncore_dpll_bypass(clk);

        /* Set jitter correction */
        if (!cpu_is_omap44xx()) {
                v = __raw_readl(dd->control_reg);
                v &= ~dd->freqsel_mask;
                v |= freqsel << __ffs(dd->freqsel_mask);
                __raw_writel(v, dd->control_reg);
        }

        /* Set DPLL multiplier, divider */
        v = __raw_readl(dd->mult_div1_reg);
        v &= ~(dd->mult_mask | dd->div1_mask);
        v |= m << __ffs(dd->mult_mask);
        v |= (n - 1) << __ffs(dd->div1_mask);
        __raw_writel(v, dd->mult_div1_reg);

        /* We let the clock framework set the other output dividers later */

        /* REVISIT: Set ramp-up delay? */

        _omap3_noncore_dpll_lock(clk);

        return 0;
}

/**
 * omap3_noncore_dpll_set_rate - set non-core DPLL rate
 * @clk: struct clk * of DPLL to set
 * @rate: rounded target rate
 *
 * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
 * low-power bypass, and the target rate is the bypass source clock
 * rate, then configure the DPLL for bypass.  Otherwise, round the
 * target rate if it hasn't been done already, then program and lock
 * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
 */
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
{
        struct clk *new_parent = NULL;
        u16 freqsel = 0;
        struct dpll_data *dd;
        int ret;

        if (!clk || !rate)
                return -EINVAL;

        dd = clk->dpll_data;
        if (!dd)
                return -EINVAL;

        if (rate == omap2_get_dpll_rate(clk))
                return 0;

        /*
         * Ensure both the bypass and ref clocks are enabled prior to
         * doing anything; we need the bypass clock running to reprogram
         * the DPLL.
         */
        omap2_clk_enable(dd->clk_bypass);
        omap2_clk_enable(dd->clk_ref);

        if (dd->clk_bypass->rate == rate &&
            (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
                pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);

                ret = _omap3_noncore_dpll_bypass(clk);
                if (!ret)
                        new_parent = dd->clk_bypass;
        } else {
                if (dd->last_rounded_rate != rate)
                        omap2_dpll_round_rate(clk, rate);

                if (dd->last_rounded_rate == 0)
                        return -EINVAL;

                /* No freqsel on OMAP4 */
                if (!cpu_is_omap44xx()) {
                        freqsel = _omap3_dpll_compute_freqsel(clk,
                                                dd->last_rounded_n);
                        if (!freqsel)
                                WARN_ON(1);
                }

                pr_debug("clock: %s: set rate: locking rate to %lu.\n",
                         clk->name, rate);

                ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
                                                 dd->last_rounded_n, freqsel);
                if (!ret)
                        new_parent = dd->clk_ref;
        }
        if (!ret) {
                /*
                 * Switch the parent clock in the heirarchy, and make sure
                 * that the new parent's usecount is correct.  Note: we
                 * enable the new parent before disabling the old to avoid
                 * any unnecessary hardware disable->enable transitions.
                 */
                if (clk->usecount) {
                        omap2_clk_enable(new_parent);
                        omap2_clk_disable(clk->parent);
                }
                clk_reparent(clk, new_parent);
                clk->rate = rate;
        }
        omap2_clk_disable(dd->clk_ref);
        omap2_clk_disable(dd->clk_bypass);

        return 0;
}

/* DPLL autoidle read/set code */

/**
 * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
 * @clk: struct clk * of the DPLL to read
 *
 * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
 * -EINVAL if passed a null pointer or if the struct clk does not
 * appear to refer to a DPLL.
 */
u32 omap3_dpll_autoidle_read(struct clk *clk)
{
        const struct dpll_data *dd;
        u32 v;

        if (!clk || !clk->dpll_data)
                return -EINVAL;

        dd = clk->dpll_data;

        v = __raw_readl(dd->autoidle_reg);
        v &= dd->autoidle_mask;
        v >>= __ffs(dd->autoidle_mask);

        return v;
}

/**
 * omap3_dpll_allow_idle - enable DPLL autoidle bits
 * @clk: struct clk * of the DPLL to operate on
 *
 * Enable DPLL automatic idle control.  This automatic idle mode
 * switching takes effect only when the DPLL is locked, at least on
 * OMAP3430.  The DPLL will enter low-power stop when its downstream
 * clocks are gated.  No return value.
 */
void omap3_dpll_allow_idle(struct clk *clk)
{
        const struct dpll_data *dd;
        u32 v;

        if (!clk || !clk->dpll_data)
                return;

        dd = clk->dpll_data;

        /*
         * REVISIT: CORE DPLL can optionally enter low-power bypass
         * by writing 0x5 instead of 0x1.  Add some mechanism to
         * optionally enter this mode.
         */
        v = __raw_readl(dd->autoidle_reg);
        v &= ~dd->autoidle_mask;
        v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
        __raw_writel(v, dd->autoidle_reg);
}

/**
 * omap3_dpll_deny_idle - prevent DPLL from automatically idling
 * @clk: struct clk * of the DPLL to operate on
 *
 * Disable DPLL automatic idle control.  No return value.
 */
void omap3_dpll_deny_idle(struct clk *clk)
{
        const struct dpll_data *dd;
        u32 v;

        if (!clk || !clk->dpll_data)
                return;

        dd = clk->dpll_data;

        v = __raw_readl(dd->autoidle_reg);
        v &= ~dd->autoidle_mask;
        v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
        __raw_writel(v, dd->autoidle_reg);

}

/* Clock control for DPLL outputs */

/**
 * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
 * @clk: DPLL output struct clk
 *
 * Using parent clock DPLL data, look up DPLL state.  If locked, set our
 * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
 */
unsigned long omap3_clkoutx2_recalc(struct clk *clk)
{
        const struct dpll_data *dd;
        unsigned long rate;
        u32 v;
        struct clk *pclk;

        /* Walk up the parents of clk, looking for a DPLL */
        pclk = clk->parent;
        while (pclk && !pclk->dpll_data)
                pclk = pclk->parent;

        /* clk does not have a DPLL as a parent? */
        WARN_ON(!pclk);

        dd = pclk->dpll_data;

        WARN_ON(!dd->enable_mask);

        v = __raw_readl(dd->control_reg) & dd->enable_mask;
        v >>= __ffs(dd->enable_mask);
        if (v != OMAP3XXX_EN_DPLL_LOCKED)
                rate = clk->parent->rate;
        else
                rate = clk->parent->rate * 2;
        return rate;
}