Linux 2.6.39-rc2
[pohmelfs.git] / arch / blackfin / mach-bf537 / boards / tcm_bf537.c
blob164a7e02c022ccdb2971899682d89653c94e3a15
1 /*
2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2008-2009 Bluetechnix
4 * 2005 National ICT Australia (NICTA)
5 * Aidan Williams <aidan@nicta.com.au>
7 * Licensed under the GPL-2 or later.
8 */
10 #include <linux/device.h>
11 #include <linux/etherdevice.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/spi/spi.h>
17 #include <linux/spi/flash.h>
18 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
19 #include <linux/usb/isp1362.h>
20 #endif
21 #include <linux/ata_platform.h>
22 #include <linux/irq.h>
23 #include <asm/dma.h>
24 #include <asm/bfin5xx_spi.h>
25 #include <asm/portmux.h>
26 #include <asm/dpmc.h>
27 #include <linux/spi/mmc_spi.h>
30 * Name the Board for the /proc/cpuinfo
32 const char bfin_board_name[] = "Bluetechnix TCM BF537";
34 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
35 /* all SPI peripherals info goes here */
37 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
38 static struct mtd_partition bfin_spi_flash_partitions[] = {
40 .name = "bootloader(spi)",
41 .size = 0x00020000,
42 .offset = 0,
43 .mask_flags = MTD_CAP_ROM
44 }, {
45 .name = "linux kernel(spi)",
46 .size = 0xe0000,
47 .offset = 0x20000
48 }, {
49 .name = "file system(spi)",
50 .size = 0x700000,
51 .offset = 0x00100000,
55 static struct flash_platform_data bfin_spi_flash_data = {
56 .name = "m25p80",
57 .parts = bfin_spi_flash_partitions,
58 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
59 .type = "m25p64",
62 /* SPI flash chip (m25p64) */
63 static struct bfin5xx_spi_chip spi_flash_chip_info = {
64 .enable_dma = 0, /* use dma transfer with this chip*/
65 .bits_per_word = 8,
67 #endif
69 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
70 /* SPI ADC chip */
71 static struct bfin5xx_spi_chip spi_adc_chip_info = {
72 .enable_dma = 1, /* use dma transfer with this chip*/
73 .bits_per_word = 16,
75 #endif
77 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
78 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
79 .enable_dma = 0,
80 .bits_per_word = 16,
82 #endif
84 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
85 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
86 .enable_dma = 0,
87 .bits_per_word = 8,
89 #endif
91 static struct spi_board_info bfin_spi_board_info[] __initdata = {
92 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
94 /* the modalias must be the same as spi device driver name */
95 .modalias = "m25p80", /* Name of spi_driver for this device */
96 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
97 .bus_num = 0, /* Framework bus number */
98 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
99 .platform_data = &bfin_spi_flash_data,
100 .controller_data = &spi_flash_chip_info,
101 .mode = SPI_MODE_3,
103 #endif
105 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
107 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
108 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
109 .bus_num = 0, /* Framework bus number */
110 .chip_select = 1, /* Framework chip select. */
111 .platform_data = NULL, /* No spi_driver specific config */
112 .controller_data = &spi_adc_chip_info,
114 #endif
116 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
118 .modalias = "ad183x",
119 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
120 .bus_num = 0,
121 .chip_select = 4,
122 .controller_data = &ad1836_spi_chip_info,
124 #endif
126 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
128 .modalias = "mmc_spi",
129 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
130 .bus_num = 0,
131 .chip_select = 1,
132 .controller_data = &mmc_spi_chip_info,
133 .mode = SPI_MODE_3,
135 #endif
138 /* SPI (0) */
139 static struct resource bfin_spi0_resource[] = {
140 [0] = {
141 .start = SPI0_REGBASE,
142 .end = SPI0_REGBASE + 0xFF,
143 .flags = IORESOURCE_MEM,
145 [1] = {
146 .start = CH_SPI,
147 .end = CH_SPI,
148 .flags = IORESOURCE_DMA,
150 [2] = {
151 .start = IRQ_SPI,
152 .end = IRQ_SPI,
153 .flags = IORESOURCE_IRQ,
157 /* SPI controller data */
158 static struct bfin5xx_spi_master bfin_spi0_info = {
159 .num_chipselect = 8,
160 .enable_dma = 1, /* master has the ability to do dma transfer */
161 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
164 static struct platform_device bfin_spi0_device = {
165 .name = "bfin-spi",
166 .id = 0, /* Bus number */
167 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
168 .resource = bfin_spi0_resource,
169 .dev = {
170 .platform_data = &bfin_spi0_info, /* Passed to driver */
173 #endif /* spi master and devices */
175 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
176 static struct platform_device rtc_device = {
177 .name = "rtc-bfin",
178 .id = -1,
180 #endif
182 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
183 static struct platform_device hitachi_fb_device = {
184 .name = "hitachi-tx09",
186 #endif
188 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
189 #include <linux/smc91x.h>
191 static struct smc91x_platdata smc91x_info = {
192 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
193 .leda = RPC_LED_100_10,
194 .ledb = RPC_LED_TX_RX,
197 static struct resource smc91x_resources[] = {
199 .start = 0x20200300,
200 .end = 0x20200300 + 16,
201 .flags = IORESOURCE_MEM,
202 }, {
203 .start = IRQ_PF14,
204 .end = IRQ_PF14,
205 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
209 static struct platform_device smc91x_device = {
210 .name = "smc91x",
211 .id = 0,
212 .num_resources = ARRAY_SIZE(smc91x_resources),
213 .resource = smc91x_resources,
214 .dev = {
215 .platform_data = &smc91x_info,
218 #endif
220 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
221 static struct resource isp1362_hcd_resources[] = {
223 .start = 0x20308000,
224 .end = 0x20308000,
225 .flags = IORESOURCE_MEM,
226 }, {
227 .start = 0x20308004,
228 .end = 0x20308004,
229 .flags = IORESOURCE_MEM,
230 }, {
231 .start = IRQ_PG15,
232 .end = IRQ_PG15,
233 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
237 static struct isp1362_platform_data isp1362_priv = {
238 .sel15Kres = 1,
239 .clknotstop = 0,
240 .oc_enable = 0,
241 .int_act_high = 0,
242 .int_edge_triggered = 0,
243 .remote_wakeup_connected = 0,
244 .no_power_switching = 1,
245 .power_switching_mode = 0,
248 static struct platform_device isp1362_hcd_device = {
249 .name = "isp1362-hcd",
250 .id = 0,
251 .dev = {
252 .platform_data = &isp1362_priv,
254 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
255 .resource = isp1362_hcd_resources,
257 #endif
259 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
260 static struct resource net2272_bfin_resources[] = {
262 .start = 0x20300000,
263 .end = 0x20300000 + 0x100,
264 .flags = IORESOURCE_MEM,
265 }, {
266 .start = IRQ_PG13,
267 .end = IRQ_PG13,
268 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
272 static struct platform_device net2272_bfin_device = {
273 .name = "net2272",
274 .id = -1,
275 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
276 .resource = net2272_bfin_resources,
278 #endif
280 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
281 static struct mtd_partition cm_partitions[] = {
283 .name = "bootloader(nor)",
284 .size = 0x40000,
285 .offset = 0,
286 }, {
287 .name = "linux kernel(nor)",
288 .size = 0x100000,
289 .offset = MTDPART_OFS_APPEND,
290 }, {
291 .name = "file system(nor)",
292 .size = MTDPART_SIZ_FULL,
293 .offset = MTDPART_OFS_APPEND,
297 static struct physmap_flash_data cm_flash_data = {
298 .width = 2,
299 .parts = cm_partitions,
300 .nr_parts = ARRAY_SIZE(cm_partitions),
303 static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
305 static struct resource cm_flash_resource[] = {
307 .name = "cfi_probe",
308 .start = 0x20000000,
309 .end = 0x201fffff,
310 .flags = IORESOURCE_MEM,
311 }, {
312 .start = (unsigned long)cm_flash_gpios,
313 .end = ARRAY_SIZE(cm_flash_gpios),
314 .flags = IORESOURCE_IRQ,
318 static struct platform_device cm_flash_device = {
319 .name = "gpio-addr-flash",
320 .id = 0,
321 .dev = {
322 .platform_data = &cm_flash_data,
324 .num_resources = ARRAY_SIZE(cm_flash_resource),
325 .resource = cm_flash_resource,
327 #endif
329 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
330 #ifdef CONFIG_SERIAL_BFIN_UART0
331 static struct resource bfin_uart0_resources[] = {
333 .start = UART0_THR,
334 .end = UART0_GCTL+2,
335 .flags = IORESOURCE_MEM,
338 .start = IRQ_UART0_RX,
339 .end = IRQ_UART0_RX+1,
340 .flags = IORESOURCE_IRQ,
343 .start = IRQ_UART0_ERROR,
344 .end = IRQ_UART0_ERROR,
345 .flags = IORESOURCE_IRQ,
348 .start = CH_UART0_TX,
349 .end = CH_UART0_TX,
350 .flags = IORESOURCE_DMA,
353 .start = CH_UART0_RX,
354 .end = CH_UART0_RX,
355 .flags = IORESOURCE_DMA,
359 static unsigned short bfin_uart0_peripherals[] = {
360 P_UART0_TX, P_UART0_RX, 0
363 static struct platform_device bfin_uart0_device = {
364 .name = "bfin-uart",
365 .id = 0,
366 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
367 .resource = bfin_uart0_resources,
368 .dev = {
369 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
372 #endif
373 #ifdef CONFIG_SERIAL_BFIN_UART1
374 static struct resource bfin_uart1_resources[] = {
376 .start = UART1_THR,
377 .end = UART1_GCTL+2,
378 .flags = IORESOURCE_MEM,
381 .start = IRQ_UART1_RX,
382 .end = IRQ_UART1_RX+1,
383 .flags = IORESOURCE_IRQ,
386 .start = IRQ_UART1_ERROR,
387 .end = IRQ_UART1_ERROR,
388 .flags = IORESOURCE_IRQ,
391 .start = CH_UART1_TX,
392 .end = CH_UART1_TX,
393 .flags = IORESOURCE_DMA,
396 .start = CH_UART1_RX,
397 .end = CH_UART1_RX,
398 .flags = IORESOURCE_DMA,
402 static unsigned short bfin_uart1_peripherals[] = {
403 P_UART1_TX, P_UART1_RX, 0
406 static struct platform_device bfin_uart1_device = {
407 .name = "bfin-uart",
408 .id = 1,
409 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
410 .resource = bfin_uart1_resources,
411 .dev = {
412 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
415 #endif
416 #endif
418 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
419 #ifdef CONFIG_BFIN_SIR0
420 static struct resource bfin_sir0_resources[] = {
422 .start = 0xFFC00400,
423 .end = 0xFFC004FF,
424 .flags = IORESOURCE_MEM,
427 .start = IRQ_UART0_RX,
428 .end = IRQ_UART0_RX+1,
429 .flags = IORESOURCE_IRQ,
432 .start = CH_UART0_RX,
433 .end = CH_UART0_RX+1,
434 .flags = IORESOURCE_DMA,
438 static struct platform_device bfin_sir0_device = {
439 .name = "bfin_sir",
440 .id = 0,
441 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
442 .resource = bfin_sir0_resources,
444 #endif
445 #ifdef CONFIG_BFIN_SIR1
446 static struct resource bfin_sir1_resources[] = {
448 .start = 0xFFC02000,
449 .end = 0xFFC020FF,
450 .flags = IORESOURCE_MEM,
453 .start = IRQ_UART1_RX,
454 .end = IRQ_UART1_RX+1,
455 .flags = IORESOURCE_IRQ,
458 .start = CH_UART1_RX,
459 .end = CH_UART1_RX+1,
460 .flags = IORESOURCE_DMA,
464 static struct platform_device bfin_sir1_device = {
465 .name = "bfin_sir",
466 .id = 1,
467 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
468 .resource = bfin_sir1_resources,
470 #endif
471 #endif
473 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
474 static struct resource bfin_twi0_resource[] = {
475 [0] = {
476 .start = TWI0_REGBASE,
477 .end = TWI0_REGBASE,
478 .flags = IORESOURCE_MEM,
480 [1] = {
481 .start = IRQ_TWI,
482 .end = IRQ_TWI,
483 .flags = IORESOURCE_IRQ,
487 static struct platform_device i2c_bfin_twi_device = {
488 .name = "i2c-bfin-twi",
489 .id = 0,
490 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
491 .resource = bfin_twi0_resource,
493 #endif
495 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
496 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
497 static struct resource bfin_sport0_uart_resources[] = {
499 .start = SPORT0_TCR1,
500 .end = SPORT0_MRCS3+4,
501 .flags = IORESOURCE_MEM,
504 .start = IRQ_SPORT0_RX,
505 .end = IRQ_SPORT0_RX+1,
506 .flags = IORESOURCE_IRQ,
509 .start = IRQ_SPORT0_ERROR,
510 .end = IRQ_SPORT0_ERROR,
511 .flags = IORESOURCE_IRQ,
515 static unsigned short bfin_sport0_peripherals[] = {
516 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
517 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
520 static struct platform_device bfin_sport0_uart_device = {
521 .name = "bfin-sport-uart",
522 .id = 0,
523 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
524 .resource = bfin_sport0_uart_resources,
525 .dev = {
526 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
529 #endif
530 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
531 static struct resource bfin_sport1_uart_resources[] = {
533 .start = SPORT1_TCR1,
534 .end = SPORT1_MRCS3+4,
535 .flags = IORESOURCE_MEM,
538 .start = IRQ_SPORT1_RX,
539 .end = IRQ_SPORT1_RX+1,
540 .flags = IORESOURCE_IRQ,
543 .start = IRQ_SPORT1_ERROR,
544 .end = IRQ_SPORT1_ERROR,
545 .flags = IORESOURCE_IRQ,
549 static unsigned short bfin_sport1_peripherals[] = {
550 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
551 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
554 static struct platform_device bfin_sport1_uart_device = {
555 .name = "bfin-sport-uart",
556 .id = 1,
557 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
558 .resource = bfin_sport1_uart_resources,
559 .dev = {
560 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
563 #endif
564 #endif
566 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
567 #include <linux/bfin_mac.h>
568 static const unsigned short bfin_mac_peripherals[] = P_MII0;
570 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
572 .addr = 1,
573 .irq = IRQ_MAC_PHYINT,
577 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
578 .phydev_number = 1,
579 .phydev_data = bfin_phydev_data,
580 .phy_mode = PHY_INTERFACE_MODE_MII,
581 .mac_peripherals = bfin_mac_peripherals,
584 static struct platform_device bfin_mii_bus = {
585 .name = "bfin_mii_bus",
586 .dev = {
587 .platform_data = &bfin_mii_bus_data,
591 static struct platform_device bfin_mac_device = {
592 .name = "bfin_mac",
593 .dev = {
594 .platform_data = &bfin_mii_bus,
597 #endif
599 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
600 #define PATA_INT IRQ_PF14
602 static struct pata_platform_info bfin_pata_platform_data = {
603 .ioport_shift = 2,
604 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
607 static struct resource bfin_pata_resources[] = {
609 .start = 0x2030C000,
610 .end = 0x2030C01F,
611 .flags = IORESOURCE_MEM,
614 .start = 0x2030D018,
615 .end = 0x2030D01B,
616 .flags = IORESOURCE_MEM,
619 .start = PATA_INT,
620 .end = PATA_INT,
621 .flags = IORESOURCE_IRQ,
625 static struct platform_device bfin_pata_device = {
626 .name = "pata_platform",
627 .id = -1,
628 .num_resources = ARRAY_SIZE(bfin_pata_resources),
629 .resource = bfin_pata_resources,
630 .dev = {
631 .platform_data = &bfin_pata_platform_data,
634 #endif
636 static const unsigned int cclk_vlev_datasheet[] =
638 VRPAIR(VLEV_085, 250000000),
639 VRPAIR(VLEV_090, 376000000),
640 VRPAIR(VLEV_095, 426000000),
641 VRPAIR(VLEV_100, 426000000),
642 VRPAIR(VLEV_105, 476000000),
643 VRPAIR(VLEV_110, 476000000),
644 VRPAIR(VLEV_115, 476000000),
645 VRPAIR(VLEV_120, 500000000),
646 VRPAIR(VLEV_125, 533000000),
647 VRPAIR(VLEV_130, 600000000),
650 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
651 .tuple_tab = cclk_vlev_datasheet,
652 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
653 .vr_settling_time = 25 /* us */,
656 static struct platform_device bfin_dpmc = {
657 .name = "bfin dpmc",
658 .dev = {
659 .platform_data = &bfin_dmpc_vreg_data,
663 static struct platform_device *cm_bf537_devices[] __initdata = {
665 &bfin_dpmc,
667 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
668 &hitachi_fb_device,
669 #endif
671 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
672 &rtc_device,
673 #endif
675 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
676 #ifdef CONFIG_SERIAL_BFIN_UART0
677 &bfin_uart0_device,
678 #endif
679 #ifdef CONFIG_SERIAL_BFIN_UART1
680 &bfin_uart1_device,
681 #endif
682 #endif
684 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
685 #ifdef CONFIG_BFIN_SIR0
686 &bfin_sir0_device,
687 #endif
688 #ifdef CONFIG_BFIN_SIR1
689 &bfin_sir1_device,
690 #endif
691 #endif
693 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
694 &i2c_bfin_twi_device,
695 #endif
697 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
698 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
699 &bfin_sport0_uart_device,
700 #endif
701 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
702 &bfin_sport1_uart_device,
703 #endif
704 #endif
706 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
707 &isp1362_hcd_device,
708 #endif
710 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
711 &smc91x_device,
712 #endif
714 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
715 &bfin_mii_bus,
716 &bfin_mac_device,
717 #endif
719 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
720 &net2272_bfin_device,
721 #endif
723 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
724 &bfin_spi0_device,
725 #endif
727 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
728 &bfin_pata_device,
729 #endif
731 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
732 &cm_flash_device,
733 #endif
736 static int __init tcm_bf537_init(void)
738 printk(KERN_INFO "%s(): registering device resources\n", __func__);
739 platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
740 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
741 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
742 #endif
744 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
745 irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
746 #endif
747 return 0;
750 arch_initcall(tcm_bf537_init);
752 static struct platform_device *cm_bf537_early_devices[] __initdata = {
753 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
754 #ifdef CONFIG_SERIAL_BFIN_UART0
755 &bfin_uart0_device,
756 #endif
757 #ifdef CONFIG_SERIAL_BFIN_UART1
758 &bfin_uart1_device,
759 #endif
760 #endif
762 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
763 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
764 &bfin_sport0_uart_device,
765 #endif
766 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
767 &bfin_sport1_uart_device,
768 #endif
769 #endif
772 void __init native_machine_early_platform_add_devices(void)
774 printk(KERN_INFO "register early platform devices\n");
775 early_platform_add_devices(cm_bf537_early_devices,
776 ARRAY_SIZE(cm_bf537_early_devices));
779 void bfin_get_ether_addr(char *addr)
781 random_ether_addr(addr);
782 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
784 EXPORT_SYMBOL(bfin_get_ether_addr);