Linux 2.6.33-rc2
[pohmelfs.git] / include / linux / virtio_net.h
blob085e42298ce5b1b9f353f457951e7fc49a5ef949
1 #ifndef _LINUX_VIRTIO_NET_H
2 #define _LINUX_VIRTIO_NET_H
3 /* This header is BSD licensed so anyone can use the definitions to implement
4 * compatible drivers/servers. */
5 #include <linux/types.h>
6 #include <linux/virtio_ids.h>
7 #include <linux/virtio_config.h>
8 #include <linux/if_ether.h>
10 /* The feature bitmap for virtio net */
11 #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
12 #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
13 #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
14 #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
15 #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
16 #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
17 #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
18 #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
19 #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
20 #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
21 #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
22 #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
23 #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
24 #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
25 #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
26 #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
27 #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
28 #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
30 #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
32 struct virtio_net_config {
33 /* The config defining mac address (if VIRTIO_NET_F_MAC) */
34 __u8 mac[6];
35 /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
36 __u16 status;
37 } __attribute__((packed));
39 /* This is the first element of the scatter-gather list. If you don't
40 * specify GSO or CSUM features, you can simply ignore the header. */
41 struct virtio_net_hdr {
42 #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
43 __u8 flags;
44 #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
45 #define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
46 #define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
47 #define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
48 #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
49 __u8 gso_type;
50 __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
51 __u16 gso_size; /* Bytes to append to hdr_len per frame */
52 __u16 csum_start; /* Position to start checksumming from */
53 __u16 csum_offset; /* Offset after that to place checksum */
56 /* This is the version of the header to use when the MRG_RXBUF
57 * feature has been negotiated. */
58 struct virtio_net_hdr_mrg_rxbuf {
59 struct virtio_net_hdr hdr;
60 __u16 num_buffers; /* Number of merged rx buffers */
64 * Control virtqueue data structures
66 * The control virtqueue expects a header in the first sg entry
67 * and an ack/status response in the last entry. Data for the
68 * command goes in between.
70 struct virtio_net_ctrl_hdr {
71 __u8 class;
72 __u8 cmd;
73 } __attribute__((packed));
75 typedef __u8 virtio_net_ctrl_ack;
77 #define VIRTIO_NET_OK 0
78 #define VIRTIO_NET_ERR 1
81 * Control the RX mode, ie. promisucous, allmulti, etc...
82 * All commands require an "out" sg entry containing a 1 byte
83 * state value, zero = disable, non-zero = enable. Commands
84 * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
85 * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
87 #define VIRTIO_NET_CTRL_RX 0
88 #define VIRTIO_NET_CTRL_RX_PROMISC 0
89 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
90 #define VIRTIO_NET_CTRL_RX_ALLUNI 2
91 #define VIRTIO_NET_CTRL_RX_NOMULTI 3
92 #define VIRTIO_NET_CTRL_RX_NOUNI 4
93 #define VIRTIO_NET_CTRL_RX_NOBCAST 5
96 * Control the MAC filter table.
98 * The MAC filter table is managed by the hypervisor, the guest should
99 * assume the size is infinite. Filtering should be considered
100 * non-perfect, ie. based on hypervisor resources, the guest may
101 * received packets from sources not specified in the filter list.
103 * In addition to the class/cmd header, the TABLE_SET command requires
104 * two out scatterlists. Each contains a 4 byte count of entries followed
105 * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
106 * first sg list contains unicast addresses, the second is for multicast.
107 * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
108 * is available.
110 struct virtio_net_ctrl_mac {
111 __u32 entries;
112 __u8 macs[][ETH_ALEN];
113 } __attribute__((packed));
115 #define VIRTIO_NET_CTRL_MAC 1
116 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
119 * Control VLAN filtering
121 * The VLAN filter table is controlled via a simple ADD/DEL interface.
122 * VLAN IDs not added may be filterd by the hypervisor. Del is the
123 * opposite of add. Both commands expect an out entry containing a 2
124 * byte VLAN ID. VLAN filterting is available with the
125 * VIRTIO_NET_F_CTRL_VLAN feature bit.
127 #define VIRTIO_NET_CTRL_VLAN 2
128 #define VIRTIO_NET_CTRL_VLAN_ADD 0
129 #define VIRTIO_NET_CTRL_VLAN_DEL 1
131 #endif /* _LINUX_VIRTIO_NET_H */