Switched to async sending
[pohmelfs.git] / drivers / parport / parport_serial.c
blobe9c32274df3fd5fcd679f67db9d67a5b4b61dc2b
1 /*
2 * Support for common PCI multi-I/O cards (which is most of them)
4 * Copyright (C) 2001 Tim Waugh <twaugh@redhat.com>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 * Multi-function PCI cards are supposed to present separate logical
13 * devices on the bus. A common thing to do seems to be to just use
14 * one logical device with lots of base address registers for both
15 * parallel ports and serial ports. This driver is for dealing with
16 * that.
20 #include <linux/types.h>
21 #include <linux/module.h>
22 #include <linux/init.h>
23 #include <linux/slab.h>
24 #include <linux/pci.h>
25 #include <linux/interrupt.h>
26 #include <linux/parport.h>
27 #include <linux/parport_pc.h>
28 #include <linux/8250_pci.h>
30 enum parport_pc_pci_cards {
31 titan_110l = 0,
32 titan_210l,
33 netmos_9xx5_combo,
34 netmos_9855,
35 netmos_9855_2p,
36 netmos_9900,
37 netmos_9900_2p,
38 netmos_99xx_1p,
39 avlab_1s1p,
40 avlab_1s2p,
41 avlab_2s1p,
42 siig_1s1p_10x,
43 siig_2s1p_10x,
44 siig_2p1s_20x,
45 siig_1s1p_20x,
46 siig_2s1p_20x,
47 timedia_4078a,
48 timedia_4079h,
49 timedia_4085h,
50 timedia_4088a,
51 timedia_4089a,
52 timedia_4095a,
53 timedia_4096a,
54 timedia_4078u,
55 timedia_4079a,
56 timedia_4085u,
57 timedia_4079r,
58 timedia_4079s,
59 timedia_4079d,
60 timedia_4079e,
61 timedia_4079f,
62 timedia_9079a,
63 timedia_9079b,
64 timedia_9079c,
67 /* each element directly indexed from enum list, above */
68 struct parport_pc_pci {
69 int numports;
70 struct { /* BAR (base address registers) numbers in the config
71 space header */
72 int lo;
73 int hi; /* -1 if not there, >6 for offset-method (max
74 BAR is 6) */
75 } addr[4];
77 /* If set, this is called immediately after pci_enable_device.
78 * If it returns non-zero, no probing will take place and the
79 * ports will not be used. */
80 int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
81 int autoirq, int autodma);
83 /* If set, this is called after probing for ports. If 'failed'
84 * is non-zero we couldn't use any of the ports. */
85 void (*postinit_hook) (struct pci_dev *pdev,
86 struct parport_pc_pci *card, int failed);
89 static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma)
91 /* the rule described below doesn't hold for this device */
92 if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
93 dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
94 dev->subsystem_device == 0x0299)
95 return -ENODEV;
97 if (dev->device == PCI_DEVICE_ID_NETMOS_9912) {
98 par->numports = 1;
99 } else {
101 * Netmos uses the subdevice ID to indicate the number of parallel
102 * and serial ports. The form is 0x00PS, where <P> is the number of
103 * parallel ports and <S> is the number of serial ports.
105 par->numports = (dev->subsystem_device & 0xf0) >> 4;
106 if (par->numports > ARRAY_SIZE(par->addr))
107 par->numports = ARRAY_SIZE(par->addr);
110 return 0;
113 static struct parport_pc_pci cards[] __devinitdata = {
114 /* titan_110l */ { 1, { { 3, -1 }, } },
115 /* titan_210l */ { 1, { { 3, -1 }, } },
116 /* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init },
117 /* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init },
118 /* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } },
119 /* netmos_9900 */ {1, { { 3, 4 }, }, netmos_parallel_init },
120 /* netmos_9900_2p */ {2, { { 0, 1 }, { 3, 4 }, } },
121 /* netmos_99xx_1p */ {1, { { 0, 1 }, } },
122 /* avlab_1s1p */ { 1, { { 1, 2}, } },
123 /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
124 /* avlab_2s1p */ { 1, { { 2, 3}, } },
125 /* siig_1s1p_10x */ { 1, { { 3, 4 }, } },
126 /* siig_2s1p_10x */ { 1, { { 4, 5 }, } },
127 /* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
128 /* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
129 /* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
130 /* timedia_4078a */ { 1, { { 2, -1 }, } },
131 /* timedia_4079h */ { 1, { { 2, 3 }, } },
132 /* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } },
133 /* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } },
134 /* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } },
135 /* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } },
136 /* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } },
137 /* timedia_4078u */ { 1, { { 2, -1 }, } },
138 /* timedia_4079a */ { 1, { { 2, 3 }, } },
139 /* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } },
140 /* timedia_4079r */ { 1, { { 2, 3 }, } },
141 /* timedia_4079s */ { 1, { { 2, 3 }, } },
142 /* timedia_4079d */ { 1, { { 2, 3 }, } },
143 /* timedia_4079e */ { 1, { { 2, 3 }, } },
144 /* timedia_4079f */ { 1, { { 2, 3 }, } },
145 /* timedia_9079a */ { 1, { { 2, 3 }, } },
146 /* timedia_9079b */ { 1, { { 2, 3 }, } },
147 /* timedia_9079c */ { 1, { { 2, 3 }, } },
150 static struct pci_device_id parport_serial_pci_tbl[] = {
151 /* PCI cards */
152 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
153 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
154 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
155 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
156 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
157 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
158 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
159 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
160 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
161 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
162 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
163 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
164 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
165 0x1000, 0x0020, 0, 0, netmos_9855_2p },
166 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
167 0x1000, 0x0022, 0, 0, netmos_9855_2p },
168 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
169 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
170 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
171 0xA000, 0x3011, 0, 0, netmos_9900 },
172 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
173 0xA000, 0x3012, 0, 0, netmos_9900 },
174 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
175 0xA000, 0x3020, 0, 0, netmos_9900_2p },
176 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
177 0xA000, 0x2000, 0, 0, netmos_99xx_1p },
178 /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
179 { PCI_VENDOR_ID_AFAVLAB, 0x2110,
180 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
181 { PCI_VENDOR_ID_AFAVLAB, 0x2111,
182 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
183 { PCI_VENDOR_ID_AFAVLAB, 0x2112,
184 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
185 { PCI_VENDOR_ID_AFAVLAB, 0x2140,
186 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
187 { PCI_VENDOR_ID_AFAVLAB, 0x2141,
188 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
189 { PCI_VENDOR_ID_AFAVLAB, 0x2142,
190 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
191 { PCI_VENDOR_ID_AFAVLAB, 0x2160,
192 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
193 { PCI_VENDOR_ID_AFAVLAB, 0x2161,
194 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
195 { PCI_VENDOR_ID_AFAVLAB, 0x2162,
196 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
197 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
198 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
199 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
200 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
201 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
202 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
203 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
204 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
205 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
206 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
207 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
208 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
209 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
210 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
211 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
212 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
213 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
214 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
215 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
216 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
217 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
218 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
219 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
220 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
221 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
222 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
223 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
224 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
225 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
226 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
227 /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
228 { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
229 { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
230 { 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
231 { 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
232 { 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
233 { 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
234 { 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
235 { 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
236 { 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
237 { 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
238 { 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
239 { 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
240 { 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
241 { 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
242 { 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
243 { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
244 { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
245 { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
247 { 0, } /* terminate list */
249 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
252 * This table describes the serial "geometry" of these boards. Any
253 * quirks for these can be found in drivers/serial/8250_pci.c
255 * Cards not tested are marked n/t
256 * If you have one of these cards and it works for you, please tell me..
258 static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
259 [titan_110l] = {
260 .flags = FL_BASE1 | FL_BASE_BARS,
261 .num_ports = 1,
262 .base_baud = 921600,
263 .uart_offset = 8,
265 [titan_210l] = {
266 .flags = FL_BASE1 | FL_BASE_BARS,
267 .num_ports = 2,
268 .base_baud = 921600,
269 .uart_offset = 8,
271 [netmos_9xx5_combo] = {
272 .flags = FL_BASE0 | FL_BASE_BARS,
273 .num_ports = 1,
274 .base_baud = 115200,
275 .uart_offset = 8,
277 [netmos_9855] = {
278 .flags = FL_BASE2 | FL_BASE_BARS,
279 .num_ports = 1,
280 .base_baud = 115200,
281 .uart_offset = 8,
283 [netmos_9855_2p] = {
284 .flags = FL_BASE4 | FL_BASE_BARS,
285 .num_ports = 1,
286 .base_baud = 115200,
287 .uart_offset = 8,
289 [netmos_9900] = { /* n/t */
290 .flags = FL_BASE0 | FL_BASE_BARS,
291 .num_ports = 1,
292 .base_baud = 115200,
293 .uart_offset = 8,
295 [netmos_9900_2p] = { /* parallel only */ /* n/t */
296 .flags = FL_BASE0,
297 .num_ports = 0,
298 .base_baud = 115200,
299 .uart_offset = 8,
301 [netmos_99xx_1p] = { /* parallel only */ /* n/t */
302 .flags = FL_BASE0,
303 .num_ports = 0,
304 .base_baud = 115200,
305 .uart_offset = 8,
307 [avlab_1s1p] = { /* n/t */
308 .flags = FL_BASE0 | FL_BASE_BARS,
309 .num_ports = 1,
310 .base_baud = 115200,
311 .uart_offset = 8,
313 [avlab_1s2p] = { /* n/t */
314 .flags = FL_BASE0 | FL_BASE_BARS,
315 .num_ports = 1,
316 .base_baud = 115200,
317 .uart_offset = 8,
319 [avlab_2s1p] = { /* n/t */
320 .flags = FL_BASE0 | FL_BASE_BARS,
321 .num_ports = 2,
322 .base_baud = 115200,
323 .uart_offset = 8,
325 [siig_1s1p_10x] = {
326 .flags = FL_BASE2,
327 .num_ports = 1,
328 .base_baud = 460800,
329 .uart_offset = 8,
331 [siig_2s1p_10x] = {
332 .flags = FL_BASE2,
333 .num_ports = 1,
334 .base_baud = 921600,
335 .uart_offset = 8,
337 [siig_2p1s_20x] = {
338 .flags = FL_BASE0,
339 .num_ports = 1,
340 .base_baud = 921600,
341 .uart_offset = 8,
343 [siig_1s1p_20x] = {
344 .flags = FL_BASE0,
345 .num_ports = 1,
346 .base_baud = 921600,
347 .uart_offset = 8,
349 [siig_2s1p_20x] = {
350 .flags = FL_BASE0,
351 .num_ports = 1,
352 .base_baud = 921600,
353 .uart_offset = 8,
355 [timedia_4078a] = {
356 .flags = FL_BASE0|FL_BASE_BARS,
357 .num_ports = 1,
358 .base_baud = 921600,
359 .uart_offset = 8,
361 [timedia_4079h] = {
362 .flags = FL_BASE0|FL_BASE_BARS,
363 .num_ports = 1,
364 .base_baud = 921600,
365 .uart_offset = 8,
367 [timedia_4085h] = {
368 .flags = FL_BASE0|FL_BASE_BARS,
369 .num_ports = 1,
370 .base_baud = 921600,
371 .uart_offset = 8,
373 [timedia_4088a] = {
374 .flags = FL_BASE0|FL_BASE_BARS,
375 .num_ports = 1,
376 .base_baud = 921600,
377 .uart_offset = 8,
379 [timedia_4089a] = {
380 .flags = FL_BASE0|FL_BASE_BARS,
381 .num_ports = 1,
382 .base_baud = 921600,
383 .uart_offset = 8,
385 [timedia_4095a] = {
386 .flags = FL_BASE0|FL_BASE_BARS,
387 .num_ports = 1,
388 .base_baud = 921600,
389 .uart_offset = 8,
391 [timedia_4096a] = {
392 .flags = FL_BASE0|FL_BASE_BARS,
393 .num_ports = 1,
394 .base_baud = 921600,
395 .uart_offset = 8,
397 [timedia_4078u] = {
398 .flags = FL_BASE0|FL_BASE_BARS,
399 .num_ports = 1,
400 .base_baud = 921600,
401 .uart_offset = 8,
403 [timedia_4079a] = {
404 .flags = FL_BASE0|FL_BASE_BARS,
405 .num_ports = 1,
406 .base_baud = 921600,
407 .uart_offset = 8,
409 [timedia_4085u] = {
410 .flags = FL_BASE0|FL_BASE_BARS,
411 .num_ports = 1,
412 .base_baud = 921600,
413 .uart_offset = 8,
415 [timedia_4079r] = {
416 .flags = FL_BASE0|FL_BASE_BARS,
417 .num_ports = 1,
418 .base_baud = 921600,
419 .uart_offset = 8,
421 [timedia_4079s] = {
422 .flags = FL_BASE0|FL_BASE_BARS,
423 .num_ports = 1,
424 .base_baud = 921600,
425 .uart_offset = 8,
427 [timedia_4079d] = {
428 .flags = FL_BASE0|FL_BASE_BARS,
429 .num_ports = 1,
430 .base_baud = 921600,
431 .uart_offset = 8,
433 [timedia_4079e] = {
434 .flags = FL_BASE0|FL_BASE_BARS,
435 .num_ports = 1,
436 .base_baud = 921600,
437 .uart_offset = 8,
439 [timedia_4079f] = {
440 .flags = FL_BASE0|FL_BASE_BARS,
441 .num_ports = 1,
442 .base_baud = 921600,
443 .uart_offset = 8,
445 [timedia_9079a] = {
446 .flags = FL_BASE0|FL_BASE_BARS,
447 .num_ports = 1,
448 .base_baud = 921600,
449 .uart_offset = 8,
451 [timedia_9079b] = {
452 .flags = FL_BASE0|FL_BASE_BARS,
453 .num_ports = 1,
454 .base_baud = 921600,
455 .uart_offset = 8,
457 [timedia_9079c] = {
458 .flags = FL_BASE0|FL_BASE_BARS,
459 .num_ports = 1,
460 .base_baud = 921600,
461 .uart_offset = 8,
465 struct parport_serial_private {
466 struct serial_private *serial;
467 int num_par;
468 struct parport *port[PARPORT_MAX];
469 struct parport_pc_pci par;
472 /* Register the serial port(s) of a PCI card. */
473 static int __devinit serial_register (struct pci_dev *dev,
474 const struct pci_device_id *id)
476 struct parport_serial_private *priv = pci_get_drvdata (dev);
477 struct pciserial_board *board;
478 struct serial_private *serial;
480 board = &pci_parport_serial_boards[id->driver_data];
482 if (board->num_ports == 0)
483 return 0;
485 serial = pciserial_init_ports(dev, board);
487 if (IS_ERR(serial))
488 return PTR_ERR(serial);
490 priv->serial = serial;
491 return 0;
494 /* Register the parallel port(s) of a PCI card. */
495 static int __devinit parport_register (struct pci_dev *dev,
496 const struct pci_device_id *id)
498 struct parport_pc_pci *card;
499 struct parport_serial_private *priv = pci_get_drvdata (dev);
500 int n, success = 0;
502 priv->par = cards[id->driver_data];
503 card = &priv->par;
504 if (card->preinit_hook &&
505 card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
506 return -ENODEV;
508 for (n = 0; n < card->numports; n++) {
509 struct parport *port;
510 int lo = card->addr[n].lo;
511 int hi = card->addr[n].hi;
512 unsigned long io_lo, io_hi;
513 int irq;
515 if (priv->num_par == ARRAY_SIZE (priv->port)) {
516 printk (KERN_WARNING
517 "parport_serial: %s: only %zu parallel ports "
518 "supported (%d reported)\n", pci_name (dev),
519 ARRAY_SIZE(priv->port), card->numports);
520 break;
523 io_lo = pci_resource_start (dev, lo);
524 io_hi = 0;
525 if ((hi >= 0) && (hi <= 6))
526 io_hi = pci_resource_start (dev, hi);
527 else if (hi > 6)
528 io_lo += hi; /* Reinterpret the meaning of
529 "hi" as an offset (see SYBA
530 def.) */
531 /* TODO: test if sharing interrupts works */
532 irq = dev->irq;
533 if (irq == IRQ_NONE) {
534 dev_dbg(&dev->dev,
535 "PCI parallel port detected: I/O at %#lx(%#lx)\n",
536 io_lo, io_hi);
537 irq = PARPORT_IRQ_NONE;
538 } else {
539 dev_dbg(&dev->dev,
540 "PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
541 io_lo, io_hi, irq);
543 port = parport_pc_probe_port (io_lo, io_hi, irq,
544 PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
545 if (port) {
546 priv->port[priv->num_par++] = port;
547 success = 1;
551 if (card->postinit_hook)
552 card->postinit_hook (dev, card, !success);
554 return 0;
557 static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
558 const struct pci_device_id *id)
560 struct parport_serial_private *priv;
561 int err;
563 priv = kzalloc (sizeof *priv, GFP_KERNEL);
564 if (!priv)
565 return -ENOMEM;
566 pci_set_drvdata (dev, priv);
568 err = pci_enable_device (dev);
569 if (err) {
570 pci_set_drvdata (dev, NULL);
571 kfree (priv);
572 return err;
575 if (parport_register (dev, id)) {
576 pci_set_drvdata (dev, NULL);
577 kfree (priv);
578 return -ENODEV;
581 if (serial_register (dev, id)) {
582 int i;
583 for (i = 0; i < priv->num_par; i++)
584 parport_pc_unregister_port (priv->port[i]);
585 pci_set_drvdata (dev, NULL);
586 kfree (priv);
587 return -ENODEV;
590 return 0;
593 static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
595 struct parport_serial_private *priv = pci_get_drvdata (dev);
596 int i;
598 pci_set_drvdata(dev, NULL);
600 // Serial ports
601 if (priv->serial)
602 pciserial_remove_ports(priv->serial);
604 // Parallel ports
605 for (i = 0; i < priv->num_par; i++)
606 parport_pc_unregister_port (priv->port[i]);
608 kfree (priv);
609 return;
612 #ifdef CONFIG_PM
613 static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
615 struct parport_serial_private *priv = pci_get_drvdata(dev);
617 if (priv->serial)
618 pciserial_suspend_ports(priv->serial);
620 /* FIXME: What about parport? */
622 pci_save_state(dev);
623 pci_set_power_state(dev, pci_choose_state(dev, state));
624 return 0;
627 static int parport_serial_pci_resume(struct pci_dev *dev)
629 struct parport_serial_private *priv = pci_get_drvdata(dev);
630 int err;
632 pci_set_power_state(dev, PCI_D0);
633 pci_restore_state(dev);
636 * The device may have been disabled. Re-enable it.
638 err = pci_enable_device(dev);
639 if (err) {
640 printk(KERN_ERR "parport_serial: %s: error enabling "
641 "device for resume (%d)\n", pci_name(dev), err);
642 return err;
645 if (priv->serial)
646 pciserial_resume_ports(priv->serial);
648 /* FIXME: What about parport? */
650 return 0;
652 #endif
654 static struct pci_driver parport_serial_pci_driver = {
655 .name = "parport_serial",
656 .id_table = parport_serial_pci_tbl,
657 .probe = parport_serial_pci_probe,
658 .remove = __devexit_p(parport_serial_pci_remove),
659 #ifdef CONFIG_PM
660 .suspend = parport_serial_pci_suspend,
661 .resume = parport_serial_pci_resume,
662 #endif
666 static int __init parport_serial_init (void)
668 return pci_register_driver (&parport_serial_pci_driver);
671 static void __exit parport_serial_exit (void)
673 pci_unregister_driver (&parport_serial_pci_driver);
674 return;
677 MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
678 MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
679 MODULE_LICENSE("GPL");
681 module_init(parport_serial_init);
682 module_exit(parport_serial_exit);