drivers/acpi/acpica/evxfregn.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and
   4  *                         Address Spaces.
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2012, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <linux/export.h>
  46 #include <acpi/acpi.h>
  47 #include "accommon.h"
  48 #include "acnamesp.h"
  49 #include "acevents.h"
  50
  51 #define _COMPONENT          ACPI_EVENTS
  52 ACPI_MODULE_NAME("evxfregn")
  53
  54 /*******************************************************************************
  55  *
  56  * FUNCTION:    acpi_install_address_space_handler
  57  *
  58  * PARAMETERS:  Device          - Handle for the device
  59  *              space_id        - The address space ID
  60  *              Handler         - Address of the handler
  61  *              Setup           - Address of the setup function
  62  *              Context         - Value passed to the handler on each access
  63  *
  64  * RETURN:      Status
  65  *
  66  * DESCRIPTION: Install a handler for all op_regions of a given space_id.
  67  *
  68  * NOTE: This function should only be called after acpi_enable_subsystem has
  69  * been called. This is because any _REG methods associated with the Space ID
  70  * are executed here, and these methods can only be safely executed after
  71  * the default handlers have been installed and the hardware has been
  72  * initialized (via acpi_enable_subsystem.)
  73  *
  74  ******************************************************************************/
  75 acpi_status
  76 acpi_install_address_space_handler(acpi_handle device,
  77                                    acpi_adr_space_type space_id,
  78                                    acpi_adr_space_handler handler,
  79                                    acpi_adr_space_setup setup, void *context)
  80 {
  81         struct acpi_namespace_node *node;
  82         acpi_status status;
  83
  84         ACPI_FUNCTION_TRACE(acpi_install_address_space_handler);
  85
  86         /* Parameter validation */
  87
  88         if (!device) {
  89                 return_ACPI_STATUS(AE_BAD_PARAMETER);
  90         }
  91
  92         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
  93         if (ACPI_FAILURE(status)) {
  94                 return_ACPI_STATUS(status);
  95         }
  96
  97         /* Convert and validate the device handle */
  98
  99         node = acpi_ns_validate_handle(device);
 100         if (!node) {
 101                 status = AE_BAD_PARAMETER;
 102                 goto unlock_and_exit;
 103         }
 104
 105         /* Install the handler for all Regions for this Space ID */
 106
 107         status =
 108             acpi_ev_install_space_handler(node, space_id, handler, setup,
 109                                           context);
 110         if (ACPI_FAILURE(status)) {
 111                 goto unlock_and_exit;
 112         }
 113
 114         /*
 115          * For the default space_iDs, (the IDs for which there are default region handlers
 116          * installed) Only execute the _REG methods if the global initialization _REG
 117          * methods have already been run (via acpi_initialize_objects). In other words,
 118          * we will defer the execution of the _REG methods for these space_iDs until
 119          * execution of acpi_initialize_objects. This is done because we need the handlers
 120          * for the default spaces (mem/io/pci/table) to be installed before we can run
 121          * any control methods (or _REG methods). There is known BIOS code that depends
 122          * on this.
 123          *
 124          * For all other space_iDs, we can safely execute the _REG methods immediately.
 125          * This means that for IDs like embedded_controller, this function should be called
 126          * only after acpi_enable_subsystem has been called.
 127          */
 128         switch (space_id) {
 129         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 130         case ACPI_ADR_SPACE_SYSTEM_IO:
 131         case ACPI_ADR_SPACE_PCI_CONFIG:
 132         case ACPI_ADR_SPACE_DATA_TABLE:
 133
 134                 if (!acpi_gbl_reg_methods_executed) {
 135
 136                         /* We will defer execution of the _REG methods for this space */
 137                         goto unlock_and_exit;
 138                 }
 139                 break;
 140
 141         default:
 142                 break;
 143         }
 144
 145         /* Run all _REG methods for this address space */
 146
 147         status = acpi_ev_execute_reg_methods(node, space_id);
 148
 149       unlock_and_exit:
 150         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 151         return_ACPI_STATUS(status);
 152 }
 153
 154 ACPI_EXPORT_SYMBOL(acpi_install_address_space_handler)
 155
 156 /*******************************************************************************
 157  *
 158  * FUNCTION:    acpi_remove_address_space_handler
 159  *
 160  * PARAMETERS:  Device          - Handle for the device
 161  *              space_id        - The address space ID
 162  *              Handler         - Address of the handler
 163  *
 164  * RETURN:      Status
 165  *
 166  * DESCRIPTION: Remove a previously installed handler.
 167  *
 168  ******************************************************************************/
 169 acpi_status
 170 acpi_remove_address_space_handler(acpi_handle device,
 171                                   acpi_adr_space_type space_id,
 172                                   acpi_adr_space_handler handler)
 173 {
 174         union acpi_operand_object *obj_desc;
 175         union acpi_operand_object *handler_obj;
 176         union acpi_operand_object *region_obj;
 177         union acpi_operand_object **last_obj_ptr;
 178         struct acpi_namespace_node *node;
 179         acpi_status status;
 180
 181         ACPI_FUNCTION_TRACE(acpi_remove_address_space_handler);
 182
 183         /* Parameter validation */
 184
 185         if (!device) {
 186                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 187         }
 188
 189         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 190         if (ACPI_FAILURE(status)) {
 191                 return_ACPI_STATUS(status);
 192         }
 193
 194         /* Convert and validate the device handle */
 195
 196         node = acpi_ns_validate_handle(device);
 197         if (!node ||
 198             ((node->type != ACPI_TYPE_DEVICE) &&
 199              (node->type != ACPI_TYPE_PROCESSOR) &&
 200              (node->type != ACPI_TYPE_THERMAL) &&
 201              (node != acpi_gbl_root_node))) {
 202                 status = AE_BAD_PARAMETER;
 203                 goto unlock_and_exit;
 204         }
 205
 206         /* Make sure the internal object exists */
 207
 208         obj_desc = acpi_ns_get_attached_object(node);
 209         if (!obj_desc) {
 210                 status = AE_NOT_EXIST;
 211                 goto unlock_and_exit;
 212         }
 213
 214         /* Find the address handler the user requested */
 215
 216         handler_obj = obj_desc->device.handler;
 217         last_obj_ptr = &obj_desc->device.handler;
 218         while (handler_obj) {
 219
 220                 /* We have a handler, see if user requested this one */
 221
 222                 if (handler_obj->address_space.space_id == space_id) {
 223
 224                         /* Handler must be the same as the installed handler */
 225
 226                         if (handler_obj->address_space.handler != handler) {
 227                                 status = AE_BAD_PARAMETER;
 228                                 goto unlock_and_exit;
 229                         }
 230
 231                         /* Matched space_id, first dereference this in the Regions */
 232
 233                         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 234                                           "Removing address handler %p(%p) for region %s "
 235                                           "on Device %p(%p)\n",
 236                                           handler_obj, handler,
 237                                           acpi_ut_get_region_name(space_id),
 238                                           node, obj_desc));
 239
 240                         region_obj = handler_obj->address_space.region_list;
 241
 242                         /* Walk the handler's region list */
 243
 244                         while (region_obj) {
 245                                 /*
 246                                  * First disassociate the handler from the region.
 247                                  *
 248                                  * NOTE: this doesn't mean that the region goes away
 249                                  * The region is just inaccessible as indicated to
 250                                  * the _REG method
 251                                  */
 252                                 acpi_ev_detach_region(region_obj, TRUE);
 253
 254                                 /*
 255                                  * Walk the list: Just grab the head because the
 256                                  * detach_region removed the previous head.
 257                                  */
 258                                 region_obj =
 259                                     handler_obj->address_space.region_list;
 260
 261                         }
 262
 263                         /* Remove this Handler object from the list */
 264
 265                         *last_obj_ptr = handler_obj->address_space.next;
 266
 267                         /* Now we can delete the handler object */
 268
 269                         acpi_ut_remove_reference(handler_obj);
 270                         goto unlock_and_exit;
 271                 }
 272
 273                 /* Walk the linked list of handlers */
 274
 275                 last_obj_ptr = &handler_obj->address_space.next;
 276                 handler_obj = handler_obj->address_space.next;
 277         }
 278
 279         /* The handler does not exist */
 280
 281         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 282                           "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n",
 283                           handler, acpi_ut_get_region_name(space_id), space_id,
 284                           node, obj_desc));
 285
 286         status = AE_NOT_EXIST;
 287
 288       unlock_and_exit:
 289         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 290         return_ACPI_STATUS(status);
 291 }
 292
 293 ACPI_EXPORT_SYMBOL(acpi_remove_address_space_handler)