2 /******************************************************************************
4 * Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes
6 *****************************************************************************/
9 * Copyright (C) 2000 - 2012, Intel Corp.
10 * All rights reserved.
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
45 #include <acpi/acpi.h>
51 #define _COMPONENT ACPI_EXECUTER
52 ACPI_MODULE_NAME("exmisc")
54 /*******************************************************************************
56 * FUNCTION: acpi_ex_get_object_reference
58 * PARAMETERS: obj_desc - Create a reference to this object
59 * return_desc - Where to store the reference
60 * walk_state - Current state
64 * DESCRIPTION: Obtain and return a "reference" to the target object
65 * Common code for the ref_of_op and the cond_ref_of_op.
67 ******************************************************************************/
69 acpi_ex_get_object_reference(union acpi_operand_object
*obj_desc
,
70 union acpi_operand_object
**return_desc
,
71 struct acpi_walk_state
*walk_state
)
73 union acpi_operand_object
*reference_obj
;
74 union acpi_operand_object
*referenced_obj
;
76 ACPI_FUNCTION_TRACE_PTR(ex_get_object_reference
, obj_desc
);
80 switch (ACPI_GET_DESCRIPTOR_TYPE(obj_desc
)) {
81 case ACPI_DESC_TYPE_OPERAND
:
83 if (obj_desc
->common
.type
!= ACPI_TYPE_LOCAL_REFERENCE
) {
84 return_ACPI_STATUS(AE_AML_OPERAND_TYPE
);
88 * Must be a reference to a Local or Arg
90 switch (obj_desc
->reference
.class) {
91 case ACPI_REFCLASS_LOCAL
:
92 case ACPI_REFCLASS_ARG
:
93 case ACPI_REFCLASS_DEBUG
:
95 /* The referenced object is the pseudo-node for the local/arg */
97 referenced_obj
= obj_desc
->reference
.object
;
102 ACPI_ERROR((AE_INFO
, "Unknown Reference Class 0x%2.2X",
103 obj_desc
->reference
.class));
104 return_ACPI_STATUS(AE_AML_INTERNAL
);
108 case ACPI_DESC_TYPE_NAMED
:
111 * A named reference that has already been resolved to a Node
113 referenced_obj
= obj_desc
;
118 ACPI_ERROR((AE_INFO
, "Invalid descriptor type 0x%X",
119 ACPI_GET_DESCRIPTOR_TYPE(obj_desc
)));
120 return_ACPI_STATUS(AE_TYPE
);
123 /* Create a new reference object */
126 acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_REFERENCE
);
127 if (!reference_obj
) {
128 return_ACPI_STATUS(AE_NO_MEMORY
);
131 reference_obj
->reference
.class = ACPI_REFCLASS_REFOF
;
132 reference_obj
->reference
.object
= referenced_obj
;
133 *return_desc
= reference_obj
;
135 ACPI_DEBUG_PRINT((ACPI_DB_EXEC
,
136 "Object %p Type [%s], returning Reference %p\n",
137 obj_desc
, acpi_ut_get_object_type_name(obj_desc
),
140 return_ACPI_STATUS(AE_OK
);
143 /*******************************************************************************
145 * FUNCTION: acpi_ex_concat_template
147 * PARAMETERS: Operand0 - First source object
148 * Operand1 - Second source object
149 * actual_return_desc - Where to place the return object
150 * walk_state - Current walk state
154 * DESCRIPTION: Concatenate two resource templates
156 ******************************************************************************/
159 acpi_ex_concat_template(union acpi_operand_object
*operand0
,
160 union acpi_operand_object
*operand1
,
161 union acpi_operand_object
**actual_return_desc
,
162 struct acpi_walk_state
*walk_state
)
165 union acpi_operand_object
*return_desc
;
170 acpi_size new_length
;
172 ACPI_FUNCTION_TRACE(ex_concat_template
);
175 * Find the end_tag descriptor in each resource template.
176 * Note1: returned pointers point TO the end_tag, not past it.
177 * Note2: zero-length buffers are allowed; treated like one end_tag
180 /* Get the length of the first resource template */
182 status
= acpi_ut_get_resource_end_tag(operand0
, &end_tag
);
183 if (ACPI_FAILURE(status
)) {
184 return_ACPI_STATUS(status
);
187 length0
= ACPI_PTR_DIFF(end_tag
, operand0
->buffer
.pointer
);
189 /* Get the length of the second resource template */
191 status
= acpi_ut_get_resource_end_tag(operand1
, &end_tag
);
192 if (ACPI_FAILURE(status
)) {
193 return_ACPI_STATUS(status
);
196 length1
= ACPI_PTR_DIFF(end_tag
, operand1
->buffer
.pointer
);
198 /* Combine both lengths, minimum size will be 2 for end_tag */
200 new_length
= length0
+ length1
+ sizeof(struct aml_resource_end_tag
);
202 /* Create a new buffer object for the result (with one end_tag) */
204 return_desc
= acpi_ut_create_buffer_object(new_length
);
206 return_ACPI_STATUS(AE_NO_MEMORY
);
210 * Copy the templates to the new buffer, 0 first, then 1 follows. One
211 * end_tag descriptor is copied from Operand1.
213 new_buf
= return_desc
->buffer
.pointer
;
214 ACPI_MEMCPY(new_buf
, operand0
->buffer
.pointer
, length0
);
215 ACPI_MEMCPY(new_buf
+ length0
, operand1
->buffer
.pointer
, length1
);
217 /* Insert end_tag and set the checksum to zero, means "ignore checksum" */
219 new_buf
[new_length
- 1] = 0;
220 new_buf
[new_length
- 2] = ACPI_RESOURCE_NAME_END_TAG
| 1;
222 /* Return the completed resource template */
224 *actual_return_desc
= return_desc
;
225 return_ACPI_STATUS(AE_OK
);
228 /*******************************************************************************
230 * FUNCTION: acpi_ex_do_concatenate
232 * PARAMETERS: Operand0 - First source object
233 * Operand1 - Second source object
234 * actual_return_desc - Where to place the return object
235 * walk_state - Current walk state
239 * DESCRIPTION: Concatenate two objects OF THE SAME TYPE.
241 ******************************************************************************/
244 acpi_ex_do_concatenate(union acpi_operand_object
*operand0
,
245 union acpi_operand_object
*operand1
,
246 union acpi_operand_object
**actual_return_desc
,
247 struct acpi_walk_state
*walk_state
)
249 union acpi_operand_object
*local_operand1
= operand1
;
250 union acpi_operand_object
*return_desc
;
254 ACPI_FUNCTION_TRACE(ex_do_concatenate
);
257 * Convert the second operand if necessary. The first operand
258 * determines the type of the second operand, (See the Data Types
259 * section of the ACPI specification.) Both object types are
260 * guaranteed to be either Integer/String/Buffer by the operand
261 * resolution mechanism.
263 switch (operand0
->common
.type
) {
264 case ACPI_TYPE_INTEGER
:
266 acpi_ex_convert_to_integer(operand1
, &local_operand1
, 16);
269 case ACPI_TYPE_STRING
:
270 status
= acpi_ex_convert_to_string(operand1
, &local_operand1
,
271 ACPI_IMPLICIT_CONVERT_HEX
);
274 case ACPI_TYPE_BUFFER
:
275 status
= acpi_ex_convert_to_buffer(operand1
, &local_operand1
);
279 ACPI_ERROR((AE_INFO
, "Invalid object type: 0x%X",
280 operand0
->common
.type
));
281 status
= AE_AML_INTERNAL
;
284 if (ACPI_FAILURE(status
)) {
289 * Both operands are now known to be the same object type
290 * (Both are Integer, String, or Buffer), and we can now perform the
295 * There are three cases to handle:
297 * 1) Two Integers concatenated to produce a new Buffer
298 * 2) Two Strings concatenated to produce a new String
299 * 3) Two Buffers concatenated to produce a new Buffer
301 switch (operand0
->common
.type
) {
302 case ACPI_TYPE_INTEGER
:
304 /* Result of two Integers is a Buffer */
305 /* Need enough buffer space for two integers */
307 return_desc
= acpi_ut_create_buffer_object((acpi_size
)
309 (acpi_gbl_integer_byte_width
));
311 status
= AE_NO_MEMORY
;
315 new_buf
= (char *)return_desc
->buffer
.pointer
;
317 /* Copy the first integer, LSB first */
319 ACPI_MEMCPY(new_buf
, &operand0
->integer
.value
,
320 acpi_gbl_integer_byte_width
);
322 /* Copy the second integer (LSB first) after the first */
324 ACPI_MEMCPY(new_buf
+ acpi_gbl_integer_byte_width
,
325 &local_operand1
->integer
.value
,
326 acpi_gbl_integer_byte_width
);
329 case ACPI_TYPE_STRING
:
331 /* Result of two Strings is a String */
333 return_desc
= acpi_ut_create_string_object(((acpi_size
)
339 status
= AE_NO_MEMORY
;
343 new_buf
= return_desc
->string
.pointer
;
345 /* Concatenate the strings */
347 ACPI_STRCPY(new_buf
, operand0
->string
.pointer
);
348 ACPI_STRCPY(new_buf
+ operand0
->string
.length
,
349 local_operand1
->string
.pointer
);
352 case ACPI_TYPE_BUFFER
:
354 /* Result of two Buffers is a Buffer */
356 return_desc
= acpi_ut_create_buffer_object(((acpi_size
)
362 status
= AE_NO_MEMORY
;
366 new_buf
= (char *)return_desc
->buffer
.pointer
;
368 /* Concatenate the buffers */
370 ACPI_MEMCPY(new_buf
, operand0
->buffer
.pointer
,
371 operand0
->buffer
.length
);
372 ACPI_MEMCPY(new_buf
+ operand0
->buffer
.length
,
373 local_operand1
->buffer
.pointer
,
374 local_operand1
->buffer
.length
);
379 /* Invalid object type, should not happen here */
381 ACPI_ERROR((AE_INFO
, "Invalid object type: 0x%X",
382 operand0
->common
.type
));
383 status
= AE_AML_INTERNAL
;
387 *actual_return_desc
= return_desc
;
390 if (local_operand1
!= operand1
) {
391 acpi_ut_remove_reference(local_operand1
);
393 return_ACPI_STATUS(status
);
396 /*******************************************************************************
398 * FUNCTION: acpi_ex_do_math_op
400 * PARAMETERS: Opcode - AML opcode
401 * Integer0 - Integer operand #0
402 * Integer1 - Integer operand #1
404 * RETURN: Integer result of the operation
406 * DESCRIPTION: Execute a math AML opcode. The purpose of having all of the
407 * math functions here is to prevent a lot of pointer dereferencing
408 * to obtain the operands.
410 ******************************************************************************/
412 u64
acpi_ex_do_math_op(u16 opcode
, u64 integer0
, u64 integer1
)
415 ACPI_FUNCTION_ENTRY();
418 case AML_ADD_OP
: /* Add (Integer0, Integer1, Result) */
420 return (integer0
+ integer1
);
422 case AML_BIT_AND_OP
: /* And (Integer0, Integer1, Result) */
424 return (integer0
& integer1
);
426 case AML_BIT_NAND_OP
: /* NAnd (Integer0, Integer1, Result) */
428 return (~(integer0
& integer1
));
430 case AML_BIT_OR_OP
: /* Or (Integer0, Integer1, Result) */
432 return (integer0
| integer1
);
434 case AML_BIT_NOR_OP
: /* NOr (Integer0, Integer1, Result) */
436 return (~(integer0
| integer1
));
438 case AML_BIT_XOR_OP
: /* XOr (Integer0, Integer1, Result) */
440 return (integer0
^ integer1
);
442 case AML_MULTIPLY_OP
: /* Multiply (Integer0, Integer1, Result) */
444 return (integer0
* integer1
);
446 case AML_SHIFT_LEFT_OP
: /* shift_left (Operand, shift_count, Result) */
449 * We need to check if the shiftcount is larger than the integer bit
450 * width since the behavior of this is not well-defined in the C language.
452 if (integer1
>= acpi_gbl_integer_bit_width
) {
455 return (integer0
<< integer1
);
457 case AML_SHIFT_RIGHT_OP
: /* shift_right (Operand, shift_count, Result) */
460 * We need to check if the shiftcount is larger than the integer bit
461 * width since the behavior of this is not well-defined in the C language.
463 if (integer1
>= acpi_gbl_integer_bit_width
) {
466 return (integer0
>> integer1
);
468 case AML_SUBTRACT_OP
: /* Subtract (Integer0, Integer1, Result) */
470 return (integer0
- integer1
);
478 /*******************************************************************************
480 * FUNCTION: acpi_ex_do_logical_numeric_op
482 * PARAMETERS: Opcode - AML opcode
483 * Integer0 - Integer operand #0
484 * Integer1 - Integer operand #1
485 * logical_result - TRUE/FALSE result of the operation
489 * DESCRIPTION: Execute a logical "Numeric" AML opcode. For these Numeric
490 * operators (LAnd and LOr), both operands must be integers.
492 * Note: cleanest machine code seems to be produced by the code
493 * below, rather than using statements of the form:
494 * Result = (Integer0 && Integer1);
496 ******************************************************************************/
499 acpi_ex_do_logical_numeric_op(u16 opcode
,
500 u64 integer0
, u64 integer1
, u8
*logical_result
)
502 acpi_status status
= AE_OK
;
503 u8 local_result
= FALSE
;
505 ACPI_FUNCTION_TRACE(ex_do_logical_numeric_op
);
508 case AML_LAND_OP
: /* LAnd (Integer0, Integer1) */
510 if (integer0
&& integer1
) {
515 case AML_LOR_OP
: /* LOr (Integer0, Integer1) */
517 if (integer0
|| integer1
) {
523 status
= AE_AML_INTERNAL
;
527 /* Return the logical result and status */
529 *logical_result
= local_result
;
530 return_ACPI_STATUS(status
);
533 /*******************************************************************************
535 * FUNCTION: acpi_ex_do_logical_op
537 * PARAMETERS: Opcode - AML opcode
538 * Operand0 - operand #0
539 * Operand1 - operand #1
540 * logical_result - TRUE/FALSE result of the operation
544 * DESCRIPTION: Execute a logical AML opcode. The purpose of having all of the
545 * functions here is to prevent a lot of pointer dereferencing
546 * to obtain the operands and to simplify the generation of the
547 * logical value. For the Numeric operators (LAnd and LOr), both
548 * operands must be integers. For the other logical operators,
549 * operands can be any combination of Integer/String/Buffer. The
550 * first operand determines the type to which the second operand
553 * Note: cleanest machine code seems to be produced by the code
554 * below, rather than using statements of the form:
555 * Result = (Operand0 == Operand1);
557 ******************************************************************************/
560 acpi_ex_do_logical_op(u16 opcode
,
561 union acpi_operand_object
*operand0
,
562 union acpi_operand_object
*operand1
, u8
* logical_result
)
564 union acpi_operand_object
*local_operand1
= operand1
;
569 acpi_status status
= AE_OK
;
570 u8 local_result
= FALSE
;
573 ACPI_FUNCTION_TRACE(ex_do_logical_op
);
576 * Convert the second operand if necessary. The first operand
577 * determines the type of the second operand, (See the Data Types
578 * section of the ACPI 3.0+ specification.) Both object types are
579 * guaranteed to be either Integer/String/Buffer by the operand
580 * resolution mechanism.
582 switch (operand0
->common
.type
) {
583 case ACPI_TYPE_INTEGER
:
585 acpi_ex_convert_to_integer(operand1
, &local_operand1
, 16);
588 case ACPI_TYPE_STRING
:
589 status
= acpi_ex_convert_to_string(operand1
, &local_operand1
,
590 ACPI_IMPLICIT_CONVERT_HEX
);
593 case ACPI_TYPE_BUFFER
:
594 status
= acpi_ex_convert_to_buffer(operand1
, &local_operand1
);
598 status
= AE_AML_INTERNAL
;
602 if (ACPI_FAILURE(status
)) {
607 * Two cases: 1) Both Integers, 2) Both Strings or Buffers
609 if (operand0
->common
.type
== ACPI_TYPE_INTEGER
) {
611 * 1) Both operands are of type integer
612 * Note: local_operand1 may have changed above
614 integer0
= operand0
->integer
.value
;
615 integer1
= local_operand1
->integer
.value
;
618 case AML_LEQUAL_OP
: /* LEqual (Operand0, Operand1) */
620 if (integer0
== integer1
) {
625 case AML_LGREATER_OP
: /* LGreater (Operand0, Operand1) */
627 if (integer0
> integer1
) {
632 case AML_LLESS_OP
: /* LLess (Operand0, Operand1) */
634 if (integer0
< integer1
) {
640 status
= AE_AML_INTERNAL
;
645 * 2) Both operands are Strings or both are Buffers
646 * Note: Code below takes advantage of common Buffer/String
647 * object fields. local_operand1 may have changed above. Use
648 * memcmp to handle nulls in buffers.
650 length0
= operand0
->buffer
.length
;
651 length1
= local_operand1
->buffer
.length
;
653 /* Lexicographic compare: compare the data bytes */
655 compare
= ACPI_MEMCMP(operand0
->buffer
.pointer
,
656 local_operand1
->buffer
.pointer
,
657 (length0
> length1
) ? length1
: length0
);
660 case AML_LEQUAL_OP
: /* LEqual (Operand0, Operand1) */
662 /* Length and all bytes must be equal */
664 if ((length0
== length1
) && (compare
== 0)) {
666 /* Length and all bytes match ==> TRUE */
672 case AML_LGREATER_OP
: /* LGreater (Operand0, Operand1) */
676 goto cleanup
; /* TRUE */
679 goto cleanup
; /* FALSE */
682 /* Bytes match (to shortest length), compare lengths */
684 if (length0
> length1
) {
689 case AML_LLESS_OP
: /* LLess (Operand0, Operand1) */
692 goto cleanup
; /* FALSE */
696 goto cleanup
; /* TRUE */
699 /* Bytes match (to shortest length), compare lengths */
701 if (length0
< length1
) {
707 status
= AE_AML_INTERNAL
;
714 /* New object was created if implicit conversion performed - delete */
716 if (local_operand1
!= operand1
) {
717 acpi_ut_remove_reference(local_operand1
);
720 /* Return the logical result and status */
722 *logical_result
= local_result
;
723 return_ACPI_STATUS(status
);