Use dentry_path() to create full path to inode object
[pohmelfs.git] / drivers / isdn / sc / hardware.h
blob627324856ead85eda13819ad15a5235009a2a8a2
1 /*
2 * Hardware specific macros, defines and structures
4 * This software may be used and distributed according to the terms
5 * of the GNU General Public License, incorporated herein by reference.
7 */
9 #ifndef HARDWARE_H
10 #define HARDWARE_H
12 #include <asm/param.h> /* For HZ */
15 * General hardware parameters common to all ISA adapters
18 #define MAX_CARDS 4 /* The maximum number of cards to
19 control or probe for. */
21 #define SIGNATURE 0x87654321 /* Board reset signature */
22 #define SIG_OFFSET 0x1004 /* Where to find signature in shared RAM */
23 #define TRACE_OFFSET 0x1008 /* Trace enable word offset in shared RAM */
24 #define BUFFER_OFFSET 0x1800 /* Beginning of buffers */
26 /* I/O Port parameters */
27 #define IOBASE_MIN 0x180 /* Lowest I/O port address */
28 #define IOBASE_MAX 0x3C0 /* Highest I/O port address */
29 #define IOBASE_OFFSET 0x20 /* Inter-board I/O port gap used during
30 probing */
31 #define FIFORD_OFFSET 0x0
32 #define FIFOWR_OFFSET 0x400
33 #define FIFOSTAT_OFFSET 0x1000
34 #define RESET_OFFSET 0x2800
35 #define PG0_OFFSET 0x3000 /* Offset from I/O Base for Page 0 register */
36 #define PG1_OFFSET 0x3400 /* Offset from I/O Base for Page 1 register */
37 #define PG2_OFFSET 0x3800 /* Offset from I/O Base for Page 2 register */
38 #define PG3_OFFSET 0x3C00 /* Offset from I/O Base for Page 3 register */
40 #define FIFO_READ 0 /* FIFO Read register */
41 #define FIFO_WRITE 1 /* FIFO Write rgister */
42 #define LO_ADDR_PTR 2 /* Extended RAM Low Addr Pointer */
43 #define HI_ADDR_PTR 3 /* Extended RAM High Addr Pointer */
44 #define NOT_USED_1 4
45 #define FIFO_STATUS 5 /* FIFO Status Register */
46 #define NOT_USED_2 6
47 #define MEM_OFFSET 7
48 #define SFT_RESET 10 /* Reset Register */
49 #define EXP_BASE 11 /* Shared RAM Base address */
50 #define EXP_PAGE0 12 /* Shared RAM Page0 register */
51 #define EXP_PAGE1 13 /* Shared RAM Page1 register */
52 #define EXP_PAGE2 14 /* Shared RAM Page2 register */
53 #define EXP_PAGE3 15 /* Shared RAM Page3 register */
54 #define IRQ_SELECT 16 /* IRQ selection register */
55 #define MAX_IO_REGS 17 /* Total number of I/O ports */
57 /* FIFO register values */
58 #define RF_HAS_DATA 0x01 /* fifo has data */
59 #define RF_QUART_FULL 0x02 /* fifo quarter full */
60 #define RF_HALF_FULL 0x04 /* fifo half full */
61 #define RF_NOT_FULL 0x08 /* fifo not full */
62 #define WF_HAS_DATA 0x10 /* fifo has data */
63 #define WF_QUART_FULL 0x20 /* fifo quarter full */
64 #define WF_HALF_FULL 0x40 /* fifo half full */
65 #define WF_NOT_FULL 0x80 /* fifo not full */
67 /* Shared RAM parameters */
68 #define SRAM_MIN 0xC0000 /* Lowest host shared RAM address */
69 #define SRAM_MAX 0xEFFFF /* Highest host shared RAM address */
70 #define SRAM_PAGESIZE 0x4000 /* Size of one RAM page (16K) */
72 /* Shared RAM buffer parameters */
73 #define BUFFER_SIZE 0x800 /* The size of a buffer in bytes */
74 #define BUFFER_BASE BUFFER_OFFSET /* Offset from start of shared RAM
75 where buffer start */
76 #define BUFFERS_MAX 16 /* Maximum number of send/receive
77 buffers per channel */
78 #define HDLC_PROTO 0x01 /* Frame Format for Layer 2 */
80 #define BRI_BOARD 0
81 #define POTS_BOARD 1
82 #define PRI_BOARD 2
85 * Specific hardware parameters for the DataCommute/BRI
87 #define BRI_CHANNELS 2 /* Number of B channels */
88 #define BRI_BASEPG_VAL 0x98
89 #define BRI_MAGIC 0x60000 /* Magic Number */
90 #define BRI_MEMSIZE 0x10000 /* Amount of RAM (64K) */
91 #define BRI_PARTNO "72-029"
92 #define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
94 * Specific hardware parameters for the DataCommute/PRI
96 #define PRI_CHANNELS 23 /* Number of B channels */
97 #define PRI_BASEPG_VAL 0x88
98 #define PRI_MAGIC 0x20000 /* Magic Number */
99 #define PRI_MEMSIZE 0x100000 /* Amount of RAM (1M) */
100 #define PRI_PARTNO "72-030"
101 #define PRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
104 * Some handy macros
107 /* Determine if a channel number is valid for the adapter */
108 #define IS_VALID_CHANNEL(y,x) ((x>0) && (x <= sc_adapter[y]->channels))
110 #endif