drivers/media/dvb/dvb-usb/friio-fe.c

   1 /* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
   2  *
   3  * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
   4  *
   5  * This module is based off the the gl861 and vp702x modules.
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License as published by the Free
   9  * Software Foundation, version 2.
  10  *
  11  * see Documentation/dvb/README.dvb-usb for more information
  12  */
  13 #include <linux/init.h>
  14 #include <linux/string.h>
  15 #include <linux/slab.h>
  16
  17 #include "friio.h"
  18
  19 struct jdvbt90502_state {
  20         struct i2c_adapter *i2c;
  21         struct dvb_frontend frontend;
  22         struct jdvbt90502_config config;
  23 };
  24
  25 /* NOTE: TC90502 has 16bit register-address? */
  26 /* register 0x0100 is used for reading PLL status, so reg is u16 here */
  27 static int jdvbt90502_reg_read(struct jdvbt90502_state *state,
  28                                const u16 reg, u8 *buf, const size_t count)
  29 {
  30         int ret;
  31         u8 wbuf[3];
  32         struct i2c_msg msg[2];
  33
  34         wbuf[0] = reg & 0xFF;
  35         wbuf[1] = 0;
  36         wbuf[2] = reg >> 8;
  37
  38         msg[0].addr = state->config.demod_address;
  39         msg[0].flags = 0;
  40         msg[0].buf = wbuf;
  41         msg[0].len = sizeof(wbuf);
  42
  43         msg[1].addr = msg[0].addr;
  44         msg[1].flags = I2C_M_RD;
  45         msg[1].buf = buf;
  46         msg[1].len = count;
  47
  48         ret = i2c_transfer(state->i2c, msg, 2);
  49         if (ret != 2) {
  50                 deb_fe(" reg read failed.\n");
  51                 return -EREMOTEIO;
  52         }
  53         return 0;
  54 }
  55
  56 /* currently 16bit register-address is not used, so reg is u8 here */
  57 static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state,
  58                                        const u8 reg, const u8 val)
  59 {
  60         struct i2c_msg msg;
  61         u8 wbuf[2];
  62
  63         wbuf[0] = reg;
  64         wbuf[1] = val;
  65
  66         msg.addr = state->config.demod_address;
  67         msg.flags = 0;
  68         msg.buf = wbuf;
  69         msg.len = sizeof(wbuf);
  70
  71         if (i2c_transfer(state->i2c, &msg, 1) != 1) {
  72                 deb_fe(" reg write failed.");
  73                 return -EREMOTEIO;
  74         }
  75         return 0;
  76 }
  77
  78 static int _jdvbt90502_write(struct dvb_frontend *fe, const u8 buf[], int len)
  79 {
  80         struct jdvbt90502_state *state = fe->demodulator_priv;
  81         int err, i;
  82         for (i = 0; i < len - 1; i++) {
  83                 err = jdvbt90502_single_reg_write(state,
  84                                                   buf[0] + i, buf[i + 1]);
  85                 if (err)
  86                         return err;
  87         }
  88
  89         return 0;
  90 }
  91
  92 /* read pll status byte via the demodulator's I2C register */
  93 /* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */
  94 static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result)
  95 {
  96         int ret;
  97
  98         /* +1 for reading */
  99         u8 pll_addr_byte = (state->config.pll_address << 1) + 1;
 100
 101         *result = 0;
 102
 103         ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG,
 104                                           pll_addr_byte);
 105         if (ret)
 106                 goto error;
 107
 108         ret = jdvbt90502_reg_read(state, 0x0100, result, 1);
 109         if (ret)
 110                 goto error;
 111
 112         deb_fe("PLL read val:%02x\n", *result);
 113         return 0;
 114
 115 error:
 116         deb_fe("%s:ret == %d\n", __func__, ret);
 117         return -EREMOTEIO;
 118 }
 119
 120
 121 /* set pll frequency via the demodulator's I2C register */
 122 static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
 123 {
 124         int ret;
 125         int retry;
 126         u8 res1;
 127         u8 res2[9];
 128
 129         u8 pll_freq_cmd[PLL_CMD_LEN];
 130         u8 pll_agc_cmd[PLL_CMD_LEN];
 131         struct i2c_msg msg[2];
 132         u32 f;
 133
 134         deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
 135                state->frontend.ops.info.frequency_stepsize);
 136         /* freq -> oscilator frequency conversion. */
 137         /* freq: 473,000,000 + n*6,000,000 [+ 142857 (center freq. shift)] */
 138         f = freq / state->frontend.ops.info.frequency_stepsize;
 139         /* add 399[1/7 MHZ] = 57MHz for the IF  */
 140         f += 399;
 141         /* add center frequency shift if necessary */
 142         if (f % 7 == 0)
 143                 f++;
 144         pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
 145         pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
 146         pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
 147         pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF;
 148         pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */
 149         pll_freq_cmd[BANDSWITCH_BYTE] = 0x08;   /* UHF band */
 150
 151         msg[0].addr = state->config.demod_address;
 152         msg[0].flags = 0;
 153         msg[0].buf = pll_freq_cmd;
 154         msg[0].len = sizeof(pll_freq_cmd);
 155
 156         ret = i2c_transfer(state->i2c, &msg[0], 1);
 157         if (ret != 1)
 158                 goto error;
 159
 160         udelay(50);
 161
 162         pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG];
 163         pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE];
 164         pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1];
 165         pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2];
 166         pll_agc_cmd[CONTROL_BYTE] = 0x9A; /*  AGC_CTRL instead of BANDSWITCH */
 167         pll_agc_cmd[AGC_CTRL_BYTE] = 0x50;
 168         /* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */
 169
 170         msg[1].addr = msg[0].addr;
 171         msg[1].flags = 0;
 172         msg[1].buf = pll_agc_cmd;
 173         msg[1].len = sizeof(pll_agc_cmd);
 174
 175         ret = i2c_transfer(state->i2c, &msg[1], 1);
 176         if (ret != 1)
 177                 goto error;
 178
 179         /* I don't know what these cmds are for,  */
 180         /* but the USB log on a windows box contains them */
 181         ret = jdvbt90502_single_reg_write(state, 0x01, 0x40);
 182         ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00);
 183         if (ret)
 184                 goto error;
 185         udelay(100);
 186
 187         /* wait for the demod to be ready? */
 188 #define RETRY_COUNT 5
 189         for (retry = 0; retry < RETRY_COUNT; retry++) {
 190                 ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1);
 191                 if (ret)
 192                         goto error;
 193                 /* if (res1 != 0x00) goto error; */
 194                 ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2));
 195                 if (ret)
 196                         goto error;
 197                 if (res2[0] >= 0xA7)
 198                         break;
 199                 msleep(100);
 200         }
 201         if (retry >= RETRY_COUNT) {
 202                 deb_fe("%s: FE does not get ready after freq setting.\n",
 203                        __func__);
 204                 return -EREMOTEIO;
 205         }
 206
 207         return 0;
 208 error:
 209         deb_fe("%s:ret == %d\n", __func__, ret);
 210         return -EREMOTEIO;
 211 }
 212
 213 static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state)
 214 {
 215         u8 result;
 216         int ret;
 217
 218         *state = FE_HAS_SIGNAL;
 219
 220         ret = jdvbt90502_pll_read(fe->demodulator_priv, &result);
 221         if (ret) {
 222                 deb_fe("%s:ret == %d\n", __func__, ret);
 223                 return -EREMOTEIO;
 224         }
 225
 226         *state = FE_HAS_SIGNAL
 227                 | FE_HAS_CARRIER
 228                 | FE_HAS_VITERBI
 229                 | FE_HAS_SYNC;
 230
 231         if (result & PLL_STATUS_LOCKED)
 232                 *state |= FE_HAS_LOCK;
 233
 234         return 0;
 235 }
 236
 237 static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
 238                                            u16 *strength)
 239 {
 240         int ret;
 241         u8 rbuf[37];
 242
 243         *strength = 0;
 244
 245         /* status register (incl. signal strength) : 0x89  */
 246         /* TODO: read just the necessary registers [0x8B..0x8D]? */
 247         ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089,
 248                                   rbuf, sizeof(rbuf));
 249
 250         if (ret) {
 251                 deb_fe("%s:ret == %d\n", __func__, ret);
 252                 return -EREMOTEIO;
 253         }
 254
 255         /* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */
 256         *strength = (rbuf[3] << 8) + rbuf[4];
 257         if (rbuf[2])
 258                 *strength = 0xffff;
 259
 260         return 0;
 261 }
 262
 263
 264 /* filter out un-supported properties to notify users */
 265 static int jdvbt90502_set_property(struct dvb_frontend *fe,
 266                                    struct dtv_property *tvp)
 267 {
 268         int r = 0;
 269
 270         switch (tvp->cmd) {
 271         case DTV_DELIVERY_SYSTEM:
 272                 if (tvp->u.data != SYS_ISDBT)
 273                         r = -EINVAL;
 274                 break;
 275         case DTV_CLEAR:
 276         case DTV_TUNE:
 277         case DTV_FREQUENCY:
 278                 break;
 279         default:
 280                 r = -EINVAL;
 281         }
 282         return r;
 283 }
 284
 285 static int jdvbt90502_get_frontend(struct dvb_frontend *fe)
 286 {
 287         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 288         p->inversion = INVERSION_AUTO;
 289         p->bandwidth_hz = 6000000;
 290         p->code_rate_HP = FEC_AUTO;
 291         p->code_rate_LP = FEC_AUTO;
 292         p->modulation = QAM_64;
 293         p->transmission_mode = TRANSMISSION_MODE_AUTO;
 294         p->guard_interval = GUARD_INTERVAL_AUTO;
 295         p->hierarchy = HIERARCHY_AUTO;
 296         return 0;
 297 }
 298
 299 static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
 300 {
 301         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 302
 303         /**
 304          * NOTE: ignore all the parameters except frequency.
 305          *       others should be fixed to the proper value for ISDB-T,
 306          *       but don't check here.
 307          */
 308
 309         struct jdvbt90502_state *state = fe->demodulator_priv;
 310         int ret;
 311
 312         deb_fe("%s: Freq:%d\n", __func__, p->frequency);
 313
 314         /* for recovery from DTV_CLEAN */
 315         fe->dtv_property_cache.delivery_system = SYS_ISDBT;
 316
 317         ret = jdvbt90502_pll_set_freq(state, p->frequency);
 318         if (ret) {
 319                 deb_fe("%s:ret == %d\n", __func__, ret);
 320                 return -EREMOTEIO;
 321         }
 322
 323         return 0;
 324 }
 325
 326
 327 /**
 328  * (reg, val) commad list to initialize this module.
 329  *  captured on a Windows box.
 330  */
 331 static u8 init_code[][2] = {
 332         {0x01, 0x40},
 333         {0x04, 0x38},
 334         {0x05, 0x40},
 335         {0x07, 0x40},
 336         {0x0F, 0x4F},
 337         {0x11, 0x21},
 338         {0x12, 0x0B},
 339         {0x13, 0x2F},
 340         {0x14, 0x31},
 341         {0x16, 0x02},
 342         {0x21, 0xC4},
 343         {0x22, 0x20},
 344         {0x2C, 0x79},
 345         {0x2D, 0x34},
 346         {0x2F, 0x00},
 347         {0x30, 0x28},
 348         {0x31, 0x31},
 349         {0x32, 0xDF},
 350         {0x38, 0x01},
 351         {0x39, 0x78},
 352         {0x3B, 0x33},
 353         {0x3C, 0x33},
 354         {0x48, 0x90},
 355         {0x51, 0x68},
 356         {0x5E, 0x38},
 357         {0x71, 0x00},
 358         {0x72, 0x08},
 359         {0x77, 0x00},
 360         {0xC0, 0x21},
 361         {0xC1, 0x10},
 362         {0xE4, 0x1A},
 363         {0xEA, 0x1F},
 364         {0x77, 0x00},
 365         {0x71, 0x00},
 366         {0x71, 0x00},
 367         {0x76, 0x0C},
 368 };
 369
 370 static const int init_code_len = sizeof(init_code) / sizeof(u8[2]);
 371
 372 static int jdvbt90502_init(struct dvb_frontend *fe)
 373 {
 374         int i = -1;
 375         int ret;
 376         struct i2c_msg msg;
 377
 378         struct jdvbt90502_state *state = fe->demodulator_priv;
 379
 380         deb_fe("%s called.\n", __func__);
 381
 382         msg.addr = state->config.demod_address;
 383         msg.flags = 0;
 384         msg.len = 2;
 385         for (i = 0; i < init_code_len; i++) {
 386                 msg.buf = init_code[i];
 387                 ret = i2c_transfer(state->i2c, &msg, 1);
 388                 if (ret != 1)
 389                         goto error;
 390         }
 391         fe->dtv_property_cache.delivery_system = SYS_ISDBT;
 392         msleep(100);
 393
 394         return 0;
 395
 396 error:
 397         deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret);
 398         return -EREMOTEIO;
 399 }
 400
 401
 402 static void jdvbt90502_release(struct dvb_frontend *fe)
 403 {
 404         struct jdvbt90502_state *state = fe->demodulator_priv;
 405         kfree(state);
 406 }
 407
 408
 409 static struct dvb_frontend_ops jdvbt90502_ops;
 410
 411 struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d)
 412 {
 413         struct jdvbt90502_state *state = NULL;
 414
 415         deb_info("%s called.\n", __func__);
 416
 417         /* allocate memory for the internal state */
 418         state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL);
 419         if (state == NULL)
 420                 goto error;
 421
 422         /* setup the state */
 423         state->i2c = &d->i2c_adap;
 424         memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config));
 425
 426         /* create dvb_frontend */
 427         memcpy(&state->frontend.ops, &jdvbt90502_ops,
 428                sizeof(jdvbt90502_ops));
 429         state->frontend.demodulator_priv = state;
 430
 431         if (jdvbt90502_init(&state->frontend) < 0)
 432                 goto error;
 433
 434         return &state->frontend;
 435
 436 error:
 437         kfree(state);
 438         return NULL;
 439 }
 440
 441 static struct dvb_frontend_ops jdvbt90502_ops = {
 442         .delsys = { SYS_ISDBT },
 443         .info = {
 444                 .name                   = "Comtech JDVBT90502 ISDB-T",
 445                 .frequency_min          = 473000000, /* UHF 13ch, center */
 446                 .frequency_max          = 767142857, /* UHF 62ch, center */
 447                 .frequency_stepsize     = JDVBT90502_PLL_CLK / JDVBT90502_PLL_DIVIDER,
 448                 .frequency_tolerance    = 0,
 449
 450                 /* NOTE: this driver ignores all parameters but frequency. */
 451                 .caps = FE_CAN_INVERSION_AUTO |
 452                         FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
 453                         FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
 454                         FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
 455                         FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
 456                         FE_CAN_TRANSMISSION_MODE_AUTO |
 457                         FE_CAN_GUARD_INTERVAL_AUTO |
 458                         FE_CAN_HIERARCHY_AUTO,
 459         },
 460
 461         .release = jdvbt90502_release,
 462
 463         .init = jdvbt90502_init,
 464         .write = _jdvbt90502_write,
 465
 466         .set_property = jdvbt90502_set_property,
 467
 468         .set_frontend = jdvbt90502_set_frontend,
 469         .get_frontend = jdvbt90502_get_frontend,
 470
 471         .read_status = jdvbt90502_read_status,
 472         .read_signal_strength = jdvbt90502_read_signal_strength,
 473 };