2 * dwc3-pci.c - PCI Specific glue layer
4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
6 * Authors: Felipe Balbi <balbi@ti.com>,
7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions, and the following disclaimer,
14 * without modification.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. The names of the above-listed copyright holders may not be used
19 * to endorse or promote products derived from this software without
20 * specific prior written permission.
22 * ALTERNATIVELY, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2, as published by the Free
24 * Software Foundation.
26 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
27 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
28 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
30 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
31 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
32 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
33 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
34 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
35 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
36 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/slab.h>
42 #include <linux/pci.h>
43 #include <linux/platform_device.h>
47 /* FIXME define these in <linux/pci_ids.h> */
48 #define PCI_VENDOR_ID_SYNOPSYS 0x16c3
49 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
53 struct platform_device
*dwc3
;
56 static int __devinit
dwc3_pci_probe(struct pci_dev
*pci
,
57 const struct pci_device_id
*id
)
59 struct resource res
[2];
60 struct platform_device
*dwc3
;
61 struct dwc3_pci
*glue
;
65 glue
= kzalloc(sizeof(*glue
), GFP_KERNEL
);
67 dev_err(&pci
->dev
, "not enough memory\n");
71 glue
->dev
= &pci
->dev
;
73 ret
= pci_enable_device(pci
);
75 dev_err(&pci
->dev
, "failed to enable pci device\n");
79 pci_set_power_state(pci
, PCI_D0
);
82 devid
= dwc3_get_device_id();
86 dwc3
= platform_device_alloc("dwc3", devid
);
88 dev_err(&pci
->dev
, "couldn't allocate dwc3 device\n");
92 memset(res
, 0x00, sizeof(struct resource
) * ARRAY_SIZE(res
));
94 res
[0].start
= pci_resource_start(pci
, 0);
95 res
[0].end
= pci_resource_end(pci
, 0);
96 res
[0].name
= "dwc_usb3";
97 res
[0].flags
= IORESOURCE_MEM
;
99 res
[1].start
= pci
->irq
;
100 res
[1].name
= "dwc_usb3";
101 res
[1].flags
= IORESOURCE_IRQ
;
103 ret
= platform_device_add_resources(dwc3
, res
, ARRAY_SIZE(res
));
105 dev_err(&pci
->dev
, "couldn't add resources to dwc3 device\n");
109 pci_set_drvdata(pci
, glue
);
111 dma_set_coherent_mask(&dwc3
->dev
, pci
->dev
.coherent_dma_mask
);
113 dwc3
->dev
.dma_mask
= pci
->dev
.dma_mask
;
114 dwc3
->dev
.dma_parms
= pci
->dev
.dma_parms
;
115 dwc3
->dev
.parent
= &pci
->dev
;
118 ret
= platform_device_add(dwc3
);
120 dev_err(&pci
->dev
, "failed to register dwc3 device\n");
127 pci_set_drvdata(pci
, NULL
);
128 platform_device_put(dwc3
);
131 dwc3_put_device_id(devid
);
134 pci_disable_device(pci
);
143 static void __devexit
dwc3_pci_remove(struct pci_dev
*pci
)
145 struct dwc3_pci
*glue
= pci_get_drvdata(pci
);
147 dwc3_put_device_id(glue
->dwc3
->id
);
148 platform_device_unregister(glue
->dwc3
);
149 pci_set_drvdata(pci
, NULL
);
150 pci_disable_device(pci
);
154 static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table
) = {
156 PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS
,
157 PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3
),
159 { } /* Terminating Entry */
161 MODULE_DEVICE_TABLE(pci
, dwc3_pci_id_table
);
163 static struct pci_driver dwc3_pci_driver
= {
165 .id_table
= dwc3_pci_id_table
,
166 .probe
= dwc3_pci_probe
,
167 .remove
= __devexit_p(dwc3_pci_remove
),
170 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
171 MODULE_LICENSE("Dual BSD/GPL");
172 MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
174 static int __devinit
dwc3_pci_init(void)
176 return pci_register_driver(&dwc3_pci_driver
);
178 module_init(dwc3_pci_init
);
180 static void __exit
dwc3_pci_exit(void)
182 pci_unregister_driver(&dwc3_pci_driver
);
184 module_exit(dwc3_pci_exit
);