Use dentry_path() to create full path to inode object
[pohmelfs.git] / drivers / usb / host / ehci-orion.c
blob6c6a5a3b4ea7edcaaa83916a5d1e0f8eacf48114
1 /*
2 * drivers/usb/host/ehci-orion.c
4 * Tzachi Perelstein <tzachi@marvell.com>
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/mbus.h>
15 #include <plat/ehci-orion.h>
17 #define rdl(off) __raw_readl(hcd->regs + (off))
18 #define wrl(off, val) __raw_writel((val), hcd->regs + (off))
20 #define USB_CMD 0x140
21 #define USB_MODE 0x1a8
22 #define USB_CAUSE 0x310
23 #define USB_MASK 0x314
24 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
25 #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
26 #define USB_IPG 0x360
27 #define USB_PHY_PWR_CTRL 0x400
28 #define USB_PHY_TX_CTRL 0x420
29 #define USB_PHY_RX_CTRL 0x430
30 #define USB_PHY_IVREF_CTRL 0x440
31 #define USB_PHY_TST_GRP_CTRL 0x450
34 * Implement Orion USB controller specification guidelines
36 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
38 /* The below GLs are according to the Orion Errata document */
40 * Clear interrupt cause and mask
42 wrl(USB_CAUSE, 0);
43 wrl(USB_MASK, 0);
46 * Reset controller
48 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
49 while (rdl(USB_CMD) & 0x2);
52 * GL# USB-10: Set IPG for non start of frame packets
53 * Bits[14:8]=0xc
55 wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
58 * GL# USB-9: USB 2.0 Power Control
59 * BG_VSEL[7:6]=0x1
61 wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
64 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
65 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
67 wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
70 * GL# USB-3 GL# USB-9: USB PHY Rx Control
71 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
72 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
74 wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
77 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
78 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
80 wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
83 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
84 * REG_FIFO_SQ_RST[15]=0
86 wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
89 * Stop and reset controller
91 wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
92 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
93 while (rdl(USB_CMD) & 0x2);
96 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
97 * TBD: This need to be done after each reset!
98 * GL# USB-4 Setup USB Host mode
100 wrl(USB_MODE, 0x13);
103 static int ehci_orion_setup(struct usb_hcd *hcd)
105 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
106 int retval;
108 hcd->has_tt = 1;
110 retval = ehci_halt(ehci);
111 if (retval)
112 return retval;
115 * data structure init
117 retval = ehci_init(hcd);
118 if (retval)
119 return retval;
121 ehci_reset(ehci);
123 ehci_port_power(ehci, 0);
125 return retval;
128 static const struct hc_driver ehci_orion_hc_driver = {
129 .description = hcd_name,
130 .product_desc = "Marvell Orion EHCI",
131 .hcd_priv_size = sizeof(struct ehci_hcd),
134 * generic hardware linkage
136 .irq = ehci_irq,
137 .flags = HCD_MEMORY | HCD_USB2,
140 * basic lifecycle operations
142 .reset = ehci_orion_setup,
143 .start = ehci_run,
144 .stop = ehci_stop,
145 .shutdown = ehci_shutdown,
148 * managing i/o requests and associated device resources
150 .urb_enqueue = ehci_urb_enqueue,
151 .urb_dequeue = ehci_urb_dequeue,
152 .endpoint_disable = ehci_endpoint_disable,
153 .endpoint_reset = ehci_endpoint_reset,
156 * scheduling support
158 .get_frame_number = ehci_get_frame,
161 * root hub support
163 .hub_status_data = ehci_hub_status_data,
164 .hub_control = ehci_hub_control,
165 .bus_suspend = ehci_bus_suspend,
166 .bus_resume = ehci_bus_resume,
167 .relinquish_port = ehci_relinquish_port,
168 .port_handed_over = ehci_port_handed_over,
170 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
173 static void __init
174 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
175 const struct mbus_dram_target_info *dram)
177 int i;
179 for (i = 0; i < 4; i++) {
180 wrl(USB_WINDOW_CTRL(i), 0);
181 wrl(USB_WINDOW_BASE(i), 0);
184 for (i = 0; i < dram->num_cs; i++) {
185 const struct mbus_dram_window *cs = dram->cs + i;
187 wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
188 (cs->mbus_attr << 8) |
189 (dram->mbus_dram_target_id << 4) | 1);
190 wrl(USB_WINDOW_BASE(i), cs->base);
194 static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
196 struct orion_ehci_data *pd = pdev->dev.platform_data;
197 const struct mbus_dram_target_info *dram;
198 struct resource *res;
199 struct usb_hcd *hcd;
200 struct ehci_hcd *ehci;
201 void __iomem *regs;
202 int irq, err;
204 if (usb_disabled())
205 return -ENODEV;
207 pr_debug("Initializing Orion-SoC USB Host Controller\n");
209 irq = platform_get_irq(pdev, 0);
210 if (irq <= 0) {
211 dev_err(&pdev->dev,
212 "Found HC with no IRQ. Check %s setup!\n",
213 dev_name(&pdev->dev));
214 err = -ENODEV;
215 goto err1;
218 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
219 if (!res) {
220 dev_err(&pdev->dev,
221 "Found HC with no register addr. Check %s setup!\n",
222 dev_name(&pdev->dev));
223 err = -ENODEV;
224 goto err1;
227 if (!request_mem_region(res->start, resource_size(res),
228 ehci_orion_hc_driver.description)) {
229 dev_dbg(&pdev->dev, "controller already in use\n");
230 err = -EBUSY;
231 goto err1;
234 regs = ioremap(res->start, resource_size(res));
235 if (regs == NULL) {
236 dev_dbg(&pdev->dev, "error mapping memory\n");
237 err = -EFAULT;
238 goto err2;
241 hcd = usb_create_hcd(&ehci_orion_hc_driver,
242 &pdev->dev, dev_name(&pdev->dev));
243 if (!hcd) {
244 err = -ENOMEM;
245 goto err3;
248 hcd->rsrc_start = res->start;
249 hcd->rsrc_len = resource_size(res);
250 hcd->regs = regs;
252 ehci = hcd_to_ehci(hcd);
253 ehci->caps = hcd->regs + 0x100;
254 ehci->regs = hcd->regs + 0x100 +
255 HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
256 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
257 hcd->has_tt = 1;
258 ehci->sbrn = 0x20;
261 * (Re-)program MBUS remapping windows if we are asked to.
263 dram = mv_mbus_dram_info();
264 if (dram)
265 ehci_orion_conf_mbus_windows(hcd, dram);
268 * setup Orion USB controller.
270 switch (pd->phy_version) {
271 case EHCI_PHY_NA: /* dont change USB phy settings */
272 break;
273 case EHCI_PHY_ORION:
274 orion_usb_phy_v1_setup(hcd);
275 break;
276 case EHCI_PHY_DD:
277 case EHCI_PHY_KW:
278 default:
279 printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
282 err = usb_add_hcd(hcd, irq, IRQF_SHARED);
283 if (err)
284 goto err4;
286 return 0;
288 err4:
289 usb_put_hcd(hcd);
290 err3:
291 iounmap(regs);
292 err2:
293 release_mem_region(res->start, resource_size(res));
294 err1:
295 dev_err(&pdev->dev, "init %s fail, %d\n",
296 dev_name(&pdev->dev), err);
298 return err;
301 static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
303 struct usb_hcd *hcd = platform_get_drvdata(pdev);
305 usb_remove_hcd(hcd);
306 iounmap(hcd->regs);
307 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
308 usb_put_hcd(hcd);
310 return 0;
313 MODULE_ALIAS("platform:orion-ehci");
315 static struct platform_driver ehci_orion_driver = {
316 .probe = ehci_orion_drv_probe,
317 .remove = __exit_p(ehci_orion_drv_remove),
318 .shutdown = usb_hcd_platform_shutdown,
319 .driver.name = "orion-ehci",