include/asm-cris/arch-v10/irq.h

   1 /*
   2  * Interrupt handling assembler and defines for Linux/CRISv10
   3  */
   4
   5 #ifndef _ASM_ARCH_IRQ_H
   6 #define _ASM_ARCH_IRQ_H
   7
   8 #include <asm/arch/sv_addr_ag.h>
   9
  10 #define NR_IRQS 32
  11
  12 /* The first vector number used for IRQs in v10 is really 0x20 */
  13 /* but all the code and constants are offseted to make 0 the first */
  14 #define FIRST_IRQ 0
  15
  16 #define SOME_IRQ_NBR        IO_BITNR(R_VECT_MASK_RD, some)   /* 0 ? */
  17 #define NMI_IRQ_NBR         IO_BITNR(R_VECT_MASK_RD, nmi)    /* 1 */
  18 #define TIMER0_IRQ_NBR      IO_BITNR(R_VECT_MASK_RD, timer0) /* 2 */
  19 #define TIMER1_IRQ_NBR      IO_BITNR(R_VECT_MASK_RD, timer1) /* 3 */
  20 /* mio, ata, par0, scsi0 on 4 */
  21 /* par1, scsi1 on 5 */
  22 #define NETWORK_STATUS_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, network) /* 6 */
  23
  24 #define SERIAL_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, serial) /* 8 */
  25 #define PA_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, pa) /* 11 */
  26 /* extdma0 and extdma1 is at irq 12 and 13 and/or same as dma5 and dma6 ? */
  27 #define EXTDMA0_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma0)
  28 #define EXTDMA1_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, ext_dma1)
  29
  30 /* dma0-9 is irq 16..25 */
  31 /* 16,17: network */
  32 #define DMA0_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma0)
  33 #define DMA1_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma1)
  34 #define NETWORK_DMA_TX_IRQ_NBR DMA0_TX_IRQ_NBR
  35 #define NETWORK_DMA_RX_IRQ_NBR DMA1_RX_IRQ_NBR
  36
  37 /* 18,19: dma2 and dma3 shared by par0, scsi0, ser2 and ata */
  38 #define DMA2_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma2)
  39 #define DMA3_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma3)
  40 #define SER2_DMA_TX_IRQ_NBR DMA2_TX_IRQ_NBR
  41 #define SER2_DMA_RX_IRQ_NBR DMA3_RX_IRQ_NBR
  42
  43 /* 20,21: dma4 and dma5 shared by par1, scsi1, ser3 and extdma0 */
  44 #define DMA4_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma4)
  45 #define DMA5_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma5)
  46 #define SER3_DMA_TX_IRQ_NBR DMA4_TX_IRQ_NBR
  47 #define SER3_DMA_RX_IRQ_NBR DMA5_RX_IRQ_NBR
  48
  49 /* 22,23: dma6 and dma7 shared by ser0, extdma1 and mem2mem */
  50 #define DMA6_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma6)
  51 #define DMA7_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma7)
  52 #define SER0_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR
  53 #define SER0_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR
  54 #define MEM2MEM_DMA_TX_IRQ_NBR DMA6_TX_IRQ_NBR
  55 #define MEM2MEM_DMA_RX_IRQ_NBR DMA7_RX_IRQ_NBR
  56
  57 /* 24,25: dma8 and dma9 shared by ser1 and usb */
  58 #define DMA8_TX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma8)
  59 #define DMA9_RX_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, dma9)
  60 #define SER1_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR
  61 #define SER1_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR
  62 #define USB_DMA_TX_IRQ_NBR DMA8_TX_IRQ_NBR
  63 #define USB_DMA_RX_IRQ_NBR DMA9_RX_IRQ_NBR
  64
  65 /* usb: controller at irq 31 + uses DMA8 and DMA9 */
  66 #define USB_HC_IRQ_NBR IO_BITNR(R_VECT_MASK_RD, usb)
  67
  68 /* our fine, global, etrax irq vector! the pointer lives in the head.S file. */
  69
  70 typedef void (*irqvectptr)(void);
  71
  72 struct etrax_interrupt_vector {
  73         irqvectptr v[256];
  74 };
  75
  76 extern struct etrax_interrupt_vector *etrax_irv;
  77 void set_int_vector(int n, irqvectptr addr);
  78 void set_break_vector(int n, irqvectptr addr);
  79
  80 #define __STR(x) #x
  81 #define STR(x) __STR(x)
  82
  83 /* SAVE_ALL saves registers so they match pt_regs */
  84
  85 #define SAVE_ALL \
  86   "move $irp,[$sp=$sp-16]\n\t" /* push instruction pointer and fake SBFS struct */ \
  87   "push $srp\n\t"       /* push subroutine return pointer */ \
  88   "push $dccr\n\t"      /* push condition codes */ \
  89   "push $mof\n\t"       /* push multiply overflow reg */ \
  90   "di\n\t"             /* need to disable irq's at this point */\
  91   "subq 14*4,$sp\n\t"   /* make room for r0-r13 */ \
  92   "movem $r13,[$sp]\n\t" /* push the r0-r13 registers */ \
  93   "push $r10\n\t"       /* push orig_r10 */ \
  94   "clear.d [$sp=$sp-4]\n\t"  /* frametype - this is a normal stackframe */
  95
  96   /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */
  97
  98 #define BLOCK_IRQ(mask,nr) \
  99   "move.d " #mask ",$r0\n\t" \
 100   "move.d $r0,[0xb00000d8]\n\t"
 101
 102 #define UNBLOCK_IRQ(mask) \
 103   "move.d " #mask ",$r0\n\t" \
 104   "move.d $r0,[0xb00000dc]\n\t"
 105
 106 #define IRQ_NAME2(nr) nr##_interrupt(void)
 107 #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
 108 #define sIRQ_NAME(nr) IRQ_NAME2(sIRQ##nr)
 109 #define BAD_IRQ_NAME(nr) IRQ_NAME2(bad_IRQ##nr)
 110
 111   /* the asm IRQ handler makes sure the causing IRQ is blocked, then it calls
 112    * do_IRQ (with irq disabled still). after that it unblocks and jumps to
 113    * ret_from_intr (entry.S)
 114    *
 115    * The reason the IRQ is blocked is to allow an sti() before the handler which
 116    * will acknowledge the interrupt is run.
 117    */
 118
 119 #define BUILD_IRQ(nr,mask) \
 120 void IRQ_NAME(nr); \
 121 __asm__ ( \
 122           ".text\n\t" \
 123           "IRQ" #nr "_interrupt:\n\t" \
 124           SAVE_ALL \
 125           BLOCK_IRQ(mask,nr) /* this must be done to prevent irq loops when we ei later */ \
 126           "moveq "#nr",$r10\n\t" \
 127           "move.d $sp,$r11\n\t" \
 128           "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \
 129           UNBLOCK_IRQ(mask) \
 130           "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \
 131           "jump ret_from_intr\n\t");
 132
 133 /* This is subtle. The timer interrupt is crucial and it should not be disabled for
 134  * too long. However, if it had been a normal interrupt as per BUILD_IRQ, it would
 135  * have been BLOCK'ed, and then softirq's are run before we return here to UNBLOCK.
 136  * If the softirq's take too much time to run, the timer irq won't run and the
 137  * watchdog will kill us.
 138  *
 139  * Furthermore, if a lot of other irq's occur before we return here, the multiple_irq
 140  * handler is run and it prioritizes the timer interrupt. However if we had BLOCK'ed
 141  * it here, we would not get the multiple_irq at all.
 142  *
 143  * The non-blocking here is based on the knowledge that the timer interrupt is
 144  * registred as a fast interrupt (SA_INTERRUPT) so that we _know_ there will not
 145  * be an sti() before the timer irq handler is run to acknowledge the interrupt.
 146  */
 147
 148 #define BUILD_TIMER_IRQ(nr,mask) \
 149 void IRQ_NAME(nr); \
 150 __asm__ ( \
 151           ".text\n\t" \
 152           "IRQ" #nr "_interrupt:\n\t" \
 153           SAVE_ALL \
 154           "moveq "#nr",$r10\n\t" \
 155           "move.d $sp,$r11\n\t" \
 156           "jsr do_IRQ\n\t" /* irq.c, r10 and r11 are arguments */ \
 157           "moveq 0,$r9\n\t" /* make ret_from_intr realise we came from an irq */ \
 158           "jump ret_from_intr\n\t");
 159
 160 #endif