2 * Copyright (c) 2005 Cisco Systems. All rights reserved.
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
39 * Structures and constants for the SCSI RDMA Protocol (SRP) as
40 * defined by the INCITS T10 committee. This file was written using
41 * draft Revision 16a of the SRP standard.
44 #include <linux/types.h>
62 SRP_BUF_FORMAT_DIRECT
= 1 << 1,
63 SRP_BUF_FORMAT_INDIRECT
= 1 << 2
68 SRP_DATA_DESC_DIRECT
= 1,
69 SRP_DATA_DESC_INDIRECT
= 2
73 SRP_TSK_ABORT_TASK
= 0x01,
74 SRP_TSK_ABORT_TASK_SET
= 0x02,
75 SRP_TSK_CLEAR_TASK_SET
= 0x04,
76 SRP_TSK_LUN_RESET
= 0x08,
77 SRP_TSK_CLEAR_ACA
= 0x40
80 enum srp_login_rej_reason
{
81 SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL
= 0x00010000,
82 SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES
= 0x00010001,
83 SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE
= 0x00010002,
84 SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL
= 0x00010003,
85 SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT
= 0x00010004,
86 SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED
= 0x00010005,
87 SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED
= 0x00010006
90 struct srp_direct_buf
{
97 * We need the packed attribute because the SRP spec puts the list of
98 * descriptors at an offset of 20, which is not aligned to the size
99 * of struct srp_direct_buf.
101 struct srp_indirect_buf
{
102 struct srp_direct_buf table_desc
;
104 struct srp_direct_buf desc_list
[0] __attribute__((packed
));
108 SRP_MULTICHAN_SINGLE
= 0,
109 SRP_MULTICHAN_MULTI
= 1
112 struct srp_login_req
{
116 __be32 req_it_iu_len
;
121 u8 initiator_port_id
[16];
122 u8 target_port_id
[16];
125 struct srp_login_rsp
{
128 __be32 req_lim_delta
;
130 __be32 max_it_iu_len
;
131 __be32 max_ti_iu_len
;
137 struct srp_login_rej
{
147 struct srp_i_logout
{
153 struct srp_t_logout
{
162 * We need the packed attribute because the SRP spec only aligns the
163 * 8-byte LUN field to 4 bytes.
165 struct srp_tsk_mgmt
{
171 __be64 lun
__attribute__((packed
));
180 * We need the packed attribute because the SRP spec only aligns the
181 * 8-byte LUN field to 4 bytes.
188 u8 data_out_desc_cnt
;
192 __be64 lun
__attribute__((packed
));
202 SRP_RSP_FLAG_RSPVALID
= 1 << 0,
203 SRP_RSP_FLAG_SNSVALID
= 1 << 1,
204 SRP_RSP_FLAG_DOOVER
= 1 << 2,
205 SRP_RSP_FLAG_DOUNDER
= 1 << 3,
206 SRP_RSP_FLAG_DIOVER
= 1 << 4,
207 SRP_RSP_FLAG_DIUNDER
= 1 << 5
214 __be32 req_lim_delta
;
219 __be32 data_out_res_cnt
;
220 __be32 data_in_res_cnt
;
221 __be32 sense_data_len
;
222 __be32 resp_data_len
;
226 #endif /* SCSI_SRP_H */