include/linux/mod_devicetable.h

   1 /*
   2  * Device tables which are exported to userspace via
   3  * scripts/mod/file2alias.c.  You must keep that file in sync with this
   4  * header.
   5  */
   6
   7 #ifndef LINUX_MOD_DEVICETABLE_H
   8 #define LINUX_MOD_DEVICETABLE_H
   9
  10 #ifdef __KERNEL__
  11 #include <linux/types.h>
  12 typedef unsigned long kernel_ulong_t;
  13 #endif
  14
  15 #define PCI_ANY_ID (~0)
  16
  17 struct pci_device_id {
  18         __u32 vendor, device;           /* Vendor and device ID or PCI_ANY_ID*/
  19         __u32 subvendor, subdevice;     /* Subsystem ID's or PCI_ANY_ID */
  20         __u32 class, class_mask;        /* (class,subclass,prog-if) triplet */
  21         kernel_ulong_t driver_data;     /* Data private to the driver */
  22 };
  23
  24
  25 #define IEEE1394_MATCH_VENDOR_ID        0x0001
  26 #define IEEE1394_MATCH_MODEL_ID         0x0002
  27 #define IEEE1394_MATCH_SPECIFIER_ID     0x0004
  28 #define IEEE1394_MATCH_VERSION          0x0008
  29
  30 struct ieee1394_device_id {
  31         __u32 match_flags;
  32         __u32 vendor_id;
  33         __u32 model_id;
  34         __u32 specifier_id;
  35         __u32 version;
  36         kernel_ulong_t driver_data
  37                 __attribute__((aligned(sizeof(kernel_ulong_t))));
  38 };
  39
  40
  41 /*
  42  * Device table entry for "new style" table-driven USB drivers.
  43  * User mode code can read these tables to choose which modules to load.
  44  * Declare the table as a MODULE_DEVICE_TABLE.
  45  *
  46  * A probe() parameter will point to a matching entry from this table.
  47  * Use the driver_info field for each match to hold information tied
  48  * to that match:  device quirks, etc.
  49  *
  50  * Terminate the driver's table with an all-zeroes entry.
  51  * Use the flag values to control which fields are compared.
  52  */
  53
  54 /**
  55  * struct usb_device_id - identifies USB devices for probing and hotplugging
  56  * @match_flags: Bit mask controlling of the other fields are used to match
  57  *      against new devices.  Any field except for driver_info may be used,
  58  *      although some only make sense in conjunction with other fields.
  59  *      This is usually set by a USB_DEVICE_*() macro, which sets all
  60  *      other fields in this structure except for driver_info.
  61  * @idVendor: USB vendor ID for a device; numbers are assigned
  62  *      by the USB forum to its members.
  63  * @idProduct: Vendor-assigned product ID.
  64  * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
  65  *      This is also used to identify individual product versions, for
  66  *      a range consisting of a single device.
  67  * @bcdDevice_hi: High end of version number range.  The range of product
  68  *      versions is inclusive.
  69  * @bDeviceClass: Class of device; numbers are assigned
  70  *      by the USB forum.  Products may choose to implement classes,
  71  *      or be vendor-specific.  Device classes specify behavior of all
  72  *      the interfaces on a devices.
  73  * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
  74  * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
  75  * @bInterfaceClass: Class of interface; numbers are assigned
  76  *      by the USB forum.  Products may choose to implement classes,
  77  *      or be vendor-specific.  Interface classes specify behavior only
  78  *      of a given interface; other interfaces may support other classes.
  79  * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
  80  * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
  81  * @driver_info: Holds information used by the driver.  Usually it holds
  82  *      a pointer to a descriptor understood by the driver, or perhaps
  83  *      device flags.
  84  *
  85  * In most cases, drivers will create a table of device IDs by using
  86  * USB_DEVICE(), or similar macros designed for that purpose.
  87  * They will then export it to userspace using MODULE_DEVICE_TABLE(),
  88  * and provide it to the USB core through their usb_driver structure.
  89  *
  90  * See the usb_match_id() function for information about how matches are
  91  * performed.  Briefly, you will normally use one of several macros to help
  92  * construct these entries.  Each entry you provide will either identify
  93  * one or more specific products, or will identify a class of products
  94  * which have agreed to behave the same.  You should put the more specific
  95  * matches towards the beginning of your table, so that driver_info can
  96  * record quirks of specific products.
  97  */
  98 struct usb_device_id {
  99         /* which fields to match against? */
 100         __u16           match_flags;
 101
 102         /* Used for product specific matches; range is inclusive */
 103         __u16           idVendor;
 104         __u16           idProduct;
 105         __u16           bcdDevice_lo;
 106         __u16           bcdDevice_hi;
 107
 108         /* Used for device class matches */
 109         __u8            bDeviceClass;
 110         __u8            bDeviceSubClass;
 111         __u8            bDeviceProtocol;
 112
 113         /* Used for interface class matches */
 114         __u8            bInterfaceClass;
 115         __u8            bInterfaceSubClass;
 116         __u8            bInterfaceProtocol;
 117
 118         /* not matched against */
 119         kernel_ulong_t  driver_info;
 120 };
 121
 122 /* Some useful macros to use to create struct usb_device_id */
 123 #define USB_DEVICE_ID_MATCH_VENDOR              0x0001
 124 #define USB_DEVICE_ID_MATCH_PRODUCT             0x0002
 125 #define USB_DEVICE_ID_MATCH_DEV_LO              0x0004
 126 #define USB_DEVICE_ID_MATCH_DEV_HI              0x0008
 127 #define USB_DEVICE_ID_MATCH_DEV_CLASS           0x0010
 128 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS        0x0020
 129 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL        0x0040
 130 #define USB_DEVICE_ID_MATCH_INT_CLASS           0x0080
 131 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS        0x0100
 132 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL        0x0200
 133
 134 /* s390 CCW devices */
 135 struct ccw_device_id {
 136         __u16   match_flags;    /* which fields to match against */
 137
 138         __u16   cu_type;        /* control unit type     */
 139         __u16   dev_type;       /* device type           */
 140         __u8    cu_model;       /* control unit model    */
 141         __u8    dev_model;      /* device model          */
 142
 143         kernel_ulong_t driver_info;
 144 };
 145
 146 #define CCW_DEVICE_ID_MATCH_CU_TYPE             0x01
 147 #define CCW_DEVICE_ID_MATCH_CU_MODEL            0x02
 148 #define CCW_DEVICE_ID_MATCH_DEVICE_TYPE         0x04
 149 #define CCW_DEVICE_ID_MATCH_DEVICE_MODEL        0x08
 150
 151
 152 #define PNP_ID_LEN      8
 153 #define PNP_MAX_DEVICES 8
 154
 155 struct pnp_device_id {
 156         __u8 id[PNP_ID_LEN];
 157         kernel_ulong_t driver_data;
 158 };
 159
 160 struct pnp_card_device_id {
 161         __u8 id[PNP_ID_LEN];
 162         kernel_ulong_t driver_data;
 163         struct {
 164                 __u8 id[PNP_ID_LEN];
 165         } devs[PNP_MAX_DEVICES];
 166 };
 167
 168
 169 #define SERIO_ANY       0xff
 170
 171 struct serio_device_id {
 172         __u8 type;
 173         __u8 extra;
 174         __u8 id;
 175         __u8 proto;
 176 };
 177
 178 /*
 179  * Struct used for matching a device
 180  */
 181 struct of_device_id
 182 {
 183         char    name[32];
 184         char    type[32];
 185         char    compatible[128];
 186 #ifdef __KERNEL__
 187         void    *data;
 188 #else
 189         kernel_ulong_t data;
 190 #endif
 191 };
 192
 193 /* VIO */
 194 struct vio_device_id {
 195         char type[32];
 196         char compat[32];
 197 };
 198
 199 /* PCMCIA */
 200
 201 struct pcmcia_device_id {
 202         __u16           match_flags;
 203
 204         __u16           manf_id;
 205         __u16           card_id;
 206
 207         __u8            func_id;
 208
 209         /* for real multi-function devices */
 210         __u8            function;
 211
 212         /* for pseudo multi-function devices */
 213         __u8            device_no;
 214
 215         __u32           prod_id_hash[4]
 216                 __attribute__((aligned(sizeof(__u32))));
 217
 218         /* not matched against in kernelspace*/
 219 #ifdef __KERNEL__
 220         const char *    prod_id[4];
 221 #else
 222         kernel_ulong_t  prod_id[4]
 223                 __attribute__((aligned(sizeof(kernel_ulong_t))));
 224 #endif
 225
 226         /* not matched against */
 227         kernel_ulong_t  driver_info;
 228 #ifdef __KERNEL__
 229         char *          cisfile;
 230 #else
 231         kernel_ulong_t  cisfile;
 232 #endif
 233 };
 234
 235 #define PCMCIA_DEV_ID_MATCH_MANF_ID     0x0001
 236 #define PCMCIA_DEV_ID_MATCH_CARD_ID     0x0002
 237 #define PCMCIA_DEV_ID_MATCH_FUNC_ID     0x0004
 238 #define PCMCIA_DEV_ID_MATCH_FUNCTION    0x0008
 239 #define PCMCIA_DEV_ID_MATCH_PROD_ID1    0x0010
 240 #define PCMCIA_DEV_ID_MATCH_PROD_ID2    0x0020
 241 #define PCMCIA_DEV_ID_MATCH_PROD_ID3    0x0040
 242 #define PCMCIA_DEV_ID_MATCH_PROD_ID4    0x0080
 243 #define PCMCIA_DEV_ID_MATCH_DEVICE_NO   0x0100
 244 #define PCMCIA_DEV_ID_MATCH_FAKE_CIS    0x0200
 245 #define PCMCIA_DEV_ID_MATCH_ANONYMOUS   0x0400
 246
 247 /* I2C */
 248 struct i2c_device_id {
 249         __u16 id;
 250 };
 251
 252 #endif /* LINUX_MOD_DEVICETABLE_H */