arch/sh/boards/se/7206/irq.c

   1 /*
   2  * linux/arch/sh/boards/se/7206/irq.c
   3  *
   4  * Copyright (C) 2005,2006 Yoshinori Sato
   5  *
   6  * Hitachi SolutionEngine Support.
   7  *
   8  */
   9 #include <linux/init.h>
  10 #include <linux/irq.h>
  11 #include <linux/io.h>
  12 #include <linux/irq.h>
  13 #include <linux/interrupt.h>
  14 #include <asm/se7206.h>
  15
  16 #define INTSTS0 0x31800000
  17 #define INTSTS1 0x31800002
  18 #define INTMSK0 0x31800004
  19 #define INTMSK1 0x31800006
  20 #define INTSEL  0x31800008
  21
  22 #define IRQ0_IRQ 64
  23 #define IRQ1_IRQ 65
  24 #define IRQ3_IRQ 67
  25
  26 #define INTC_IPR01 0xfffe0818
  27 #define INTC_ICR1  0xfffe0802
  28
  29 static void disable_se7206_irq(unsigned int irq)
  30 {
  31         unsigned short val;
  32         unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
  33         unsigned short msk0,msk1;
  34
  35         /* Set the priority in IPR to 0 */
  36         val = ctrl_inw(INTC_IPR01);
  37         val &= mask;
  38         ctrl_outw(val, INTC_IPR01);
  39         /* FPGA mask set */
  40         msk0 = ctrl_inw(INTMSK0);
  41         msk1 = ctrl_inw(INTMSK1);
  42
  43         switch (irq) {
  44         case IRQ0_IRQ:
  45                 msk0 |= 0x0010;
  46                 break;
  47         case IRQ1_IRQ:
  48                 msk0 |= 0x000f;
  49                 break;
  50         case IRQ3_IRQ:
  51                 msk0 |= 0x0f00;
  52                 msk1 |= 0x00ff;
  53                 break;
  54         }
  55         ctrl_outw(msk0, INTMSK0);
  56         ctrl_outw(msk1, INTMSK1);
  57 }
  58
  59 static void enable_se7206_irq(unsigned int irq)
  60 {
  61         unsigned short val;
  62         unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
  63         unsigned short msk0,msk1;
  64
  65         /* Set priority in IPR back to original value */
  66         val = ctrl_inw(INTC_IPR01);
  67         val |= value;
  68         ctrl_outw(val, INTC_IPR01);
  69
  70         /* FPGA mask reset */
  71         msk0 = ctrl_inw(INTMSK0);
  72         msk1 = ctrl_inw(INTMSK1);
  73
  74         switch (irq) {
  75         case IRQ0_IRQ:
  76                 msk0 &= ~0x0010;
  77                 break;
  78         case IRQ1_IRQ:
  79                 msk0 &= ~0x000f;
  80                 break;
  81         case IRQ3_IRQ:
  82                 msk0 &= ~0x0f00;
  83                 msk1 &= ~0x00ff;
  84                 break;
  85         }
  86         ctrl_outw(msk0, INTMSK0);
  87         ctrl_outw(msk1, INTMSK1);
  88 }
  89
  90 static void eoi_se7206_irq(unsigned int irq)
  91 {
  92         unsigned short sts0,sts1;
  93
  94         if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
  95                 enable_se7206_irq(irq);
  96         /* FPGA isr clear */
  97         sts0 = ctrl_inw(INTSTS0);
  98         sts1 = ctrl_inw(INTSTS1);
  99
 100         switch (irq) {
 101         case IRQ0_IRQ:
 102                 sts0 &= ~0x0010;
 103                 break;
 104         case IRQ1_IRQ:
 105                 sts0 &= ~0x000f;
 106                 break;
 107         case IRQ3_IRQ:
 108                 sts0 &= ~0x0f00;
 109                 sts1 &= ~0x00ff;
 110                 break;
 111         }
 112         ctrl_outw(sts0, INTSTS0);
 113         ctrl_outw(sts1, INTSTS1);
 114 }
 115
 116 static struct irq_chip se7206_irq_chip __read_mostly = {
 117         .name           = "SE7206-FPGA",
 118         .mask           = disable_se7206_irq,
 119         .unmask         = enable_se7206_irq,
 120         .mask_ack       = disable_se7206_irq,
 121         .eoi            = eoi_se7206_irq,
 122 };
 123
 124 static void make_se7206_irq(unsigned int irq)
 125 {
 126         disable_irq_nosync(irq);
 127         set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
 128                                       handle_level_irq, "level");
 129         disable_se7206_irq(irq);
 130 }
 131
 132 /*
 133  * Initialize IRQ setting
 134  */
 135 void __init init_se7206_IRQ(void)
 136 {
 137         make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
 138         make_se7206_irq(IRQ1_IRQ); /* ATA */
 139         make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
 140         ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
 141
 142         /* FPGA System register setup*/
 143         ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
 144         ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
 145         /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
 146         ctrl_outw(0x0001,INTSEL);
 147 }