arch/mips/sni/time.c

   1 #include <linux/types.h>
   2 #include <linux/interrupt.h>
   3 #include <linux/time.h>
   4
   5 #include <asm/sni.h>
   6 #include <asm/time.h>
   7
   8 #define SNI_CLOCK_TICK_RATE     3686400
   9 #define SNI_COUNTER2_DIV        64
  10 #define SNI_COUNTER0_DIV        ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
  11
  12 static void sni_a20r_timer_ack(void)
  13 {
  14         *(volatile u8 *)A20R_PT_TIM0_ACK = 0x0; wmb();
  15 }
  16
  17 /*
  18  * a20r platform uses 2 counters to divide the input frequency.
  19  * Counter 2 output is connected to Counter 0 & 1 input.
  20  */
  21 static void __init sni_a20r_timer_setup(struct irqaction *irq)
  22 {
  23         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; wmb();
  24         *(volatile u8 *)(A20R_PT_CLOCK_BASE +  0) = (SNI_COUNTER0_DIV) & 0xff; wmb();
  25         *(volatile u8 *)(A20R_PT_CLOCK_BASE +  0) = (SNI_COUNTER0_DIV >> 8) & 0xff; wmb();
  26
  27         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; wmb();
  28         *(volatile u8 *)(A20R_PT_CLOCK_BASE +  8) = (SNI_COUNTER2_DIV) & 0xff; wmb();
  29         *(volatile u8 *)(A20R_PT_CLOCK_BASE +  8) = (SNI_COUNTER2_DIV >> 8) & 0xff; wmb();
  30
  31         setup_irq(SNI_A20R_IRQ_TIMER, irq);
  32         mips_timer_ack = sni_a20r_timer_ack;
  33 }
  34
  35 #define SNI_8254_TICK_RATE        1193182UL
  36
  37 #define SNI_8254_TCSAMP_COUNTER   ((SNI_8254_TICK_RATE / HZ) + 255)
  38
  39 static __init unsigned long dosample(void)
  40 {
  41         u32 ct0, ct1;
  42         volatile u8 msb, lsb;
  43
  44         /* Start the counter. */
  45         outb_p (0x34, 0x43);
  46         outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40);
  47         outb (SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
  48
  49         /* Get initial counter invariant */
  50         ct0 = read_c0_count();
  51
  52         /* Latch and spin until top byte of counter0 is zero */
  53         do {
  54                 outb (0x00, 0x43);
  55                 lsb = inb (0x40);
  56                 msb = inb (0x40);
  57                 ct1 = read_c0_count();
  58         } while (msb);
  59
  60         /* Stop the counter. */
  61         outb (0x38, 0x43);
  62         /*
  63          * Return the difference, this is how far the r4k counter increments
  64          * for every 1/HZ seconds. We round off the nearest 1 MHz of master
  65          * clock (= 1000000 / HZ / 2).
  66          */
  67         /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
  68         return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
  69 }
  70
  71 /*
  72  * Here we need to calibrate the cycle counter to at least be close.
  73  */
  74 __init void sni_cpu_time_init(void)
  75 {
  76         unsigned long r4k_ticks[3];
  77         unsigned long r4k_tick;
  78
  79         /*
  80          * Figure out the r4k offset, the algorithm is very simple and works in
  81          * _all_ cases as long as the 8254 counter register itself works ok (as
  82          * an interrupt driving timer it does not because of bug, this is why
  83          * we are using the onchip r4k counter/compare register to serve this
  84          * purpose, but for r4k_offset calculation it will work ok for us).
  85          * There are other very complicated ways of performing this calculation
  86          * but this one works just fine so I am not going to futz around. ;-)
  87          */
  88         printk(KERN_INFO "Calibrating system timer... ");
  89         dosample();     /* Prime cache. */
  90         dosample();     /* Prime cache. */
  91         /* Zero is NOT an option. */
  92         do {
  93                 r4k_ticks[0] = dosample();
  94         } while (!r4k_ticks[0]);
  95         do {
  96                 r4k_ticks[1] = dosample();
  97         } while (!r4k_ticks[1]);
  98
  99         if (r4k_ticks[0] != r4k_ticks[1]) {
 100                 printk("warning: timer counts differ, retrying... ");
 101                 r4k_ticks[2] = dosample();
 102                 if (r4k_ticks[2] == r4k_ticks[0]
 103                     || r4k_ticks[2] == r4k_ticks[1])
 104                         r4k_tick = r4k_ticks[2];
 105                 else {
 106                         printk("disagreement, using average... ");
 107                         r4k_tick = (r4k_ticks[0] + r4k_ticks[1]
 108                                    + r4k_ticks[2]) / 3;
 109                 }
 110         } else
 111                 r4k_tick = r4k_ticks[0];
 112
 113         printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
 114                 (int) (r4k_tick / (500000 / HZ)),
 115                 (int) (r4k_tick % (500000 / HZ)));
 116
 117         mips_hpt_frequency = r4k_tick * HZ;
 118 }
 119
 120 /*
 121  * R4k counter based timer interrupt. Works on RM200-225 and possibly
 122  * others but not on RM400
 123  */
 124 static void __init sni_cpu_timer_setup(struct irqaction *irq)
 125 {
 126         setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq);
 127 }
 128
 129 void __init plat_timer_setup(struct irqaction *irq)
 130 {
 131         switch (sni_brd_type) {
 132         case SNI_BRD_10:
 133         case SNI_BRD_10NEW:
 134         case SNI_BRD_TOWER_OASIC:
 135         case SNI_BRD_MINITOWER:
 136                 sni_a20r_timer_setup (irq);
 137                 break;
 138
 139         case SNI_BRD_PCI_TOWER:
 140         case SNI_BRD_RM200:
 141         case SNI_BRD_PCI_MTOWER:
 142         case SNI_BRD_PCI_DESKTOP:
 143         case SNI_BRD_PCI_TOWER_CPLUS:
 144         case SNI_BRD_PCI_MTOWER_CPLUS:
 145                 sni_cpu_timer_setup (irq);
 146                 break;
 147         }
 148 }