[PATCH] mm: clean up pagecache allocation

[pv_ops_mirror.git] / fs / splice.c

/*
 * "splice": joining two ropes together by interweaving their strands.
 *
 * This is the "extended pipe" functionality, where a pipe is used as
 * an arbitrary in-memory buffer. Think of a pipe as a small kernel
 * buffer that you can use to transfer data from one end to the other.
 *
 * The traditional unix read/write is extended with a "splice()" operation
 * that transfers data buffers to or from a pipe buffer.
 *
 * Named by Larry McVoy, original implementation from Linus, extended by
 * Jens to support splicing to files, network, direct splicing, etc and
 * fixing lots of bugs.
 *
 * Copyright (C) 2005-2006 Jens Axboe <axboe@kernel.dk>
 * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
 * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>
 *
 */
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/pagemap.h>
#include <linux/pipe_fs_i.h>
#include <linux/mm_inline.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h>
#include <linux/module.h>
#include <linux/syscalls.h>
#include <linux/uio.h>

struct partial_page {
        unsigned int offset;
        unsigned int len;
};

/*
 * Passed to splice_to_pipe
 */
struct splice_pipe_desc {
        struct page **pages;            /* page map */
        struct partial_page *partial;   /* pages[] may not be contig */
        int nr_pages;                   /* number of pages in map */
        unsigned int flags;             /* splice flags */
        struct pipe_buf_operations *ops;/* ops associated with output pipe */
};

/*
 * Attempt to steal a page from a pipe buffer. This should perhaps go into
 * a vm helper function, it's already simplified quite a bit by the
 * addition of remove_mapping(). If success is returned, the caller may
 * attempt to reuse this page for another destination.
 */
static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe,
                                     struct pipe_buffer *buf)
{
        struct page *page = buf->page;
        struct address_space *mapping;

        lock_page(page);

        mapping = page_mapping(page);
        if (mapping) {
                WARN_ON(!PageUptodate(page));

                /*
                 * At least for ext2 with nobh option, we need to wait on
                 * writeback completing on this page, since we'll remove it
                 * from the pagecache.  Otherwise truncate wont wait on the
                 * page, allowing the disk blocks to be reused by someone else
                 * before we actually wrote our data to them. fs corruption
                 * ensues.
                 */
                wait_on_page_writeback(page);

                if (PagePrivate(page))
                        try_to_release_page(page, GFP_KERNEL);

                /*
                 * If we succeeded in removing the mapping, set LRU flag
                 * and return good.
                 */
                if (remove_mapping(mapping, page)) {
                        buf->flags |= PIPE_BUF_FLAG_LRU;
                        return 0;
                }
        }

        /*
         * Raced with truncate or failed to remove page from current
         * address space, unlock and return failure.
         */
        unlock_page(page);
        return 1;
}

static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,
                                        struct pipe_buffer *buf)
{
        page_cache_release(buf->page);
        buf->flags &= ~PIPE_BUF_FLAG_LRU;
}

static int page_cache_pipe_buf_pin(struct pipe_inode_info *pipe,
                                   struct pipe_buffer *buf)
{
        struct page *page = buf->page;
        int err;

        if (!PageUptodate(page)) {
                lock_page(page);

                /*
                 * Page got truncated/unhashed. This will cause a 0-byte
                 * splice, if this is the first page.
                 */
                if (!page->mapping) {
                        err = -ENODATA;
                        goto error;
                }

                /*
                 * Uh oh, read-error from disk.
                 */
                if (!PageUptodate(page)) {
                        err = -EIO;
                        goto error;
                }

                /*
                 * Page is ok afterall, we are done.
                 */
                unlock_page(page);
        }

        return 0;
error:
        unlock_page(page);
        return err;
}

static struct pipe_buf_operations page_cache_pipe_buf_ops = {
        .can_merge = 0,
        .map = generic_pipe_buf_map,
        .unmap = generic_pipe_buf_unmap,
        .pin = page_cache_pipe_buf_pin,
        .release = page_cache_pipe_buf_release,
        .steal = page_cache_pipe_buf_steal,
        .get = generic_pipe_buf_get,
};

static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
                                    struct pipe_buffer *buf)
{
        if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
                return 1;

        buf->flags |= PIPE_BUF_FLAG_LRU;
        return generic_pipe_buf_steal(pipe, buf);
}

static struct pipe_buf_operations user_page_pipe_buf_ops = {
        .can_merge = 0,
        .map = generic_pipe_buf_map,
        .unmap = generic_pipe_buf_unmap,
        .pin = generic_pipe_buf_pin,
        .release = page_cache_pipe_buf_release,
        .steal = user_page_pipe_buf_steal,
        .get = generic_pipe_buf_get,
};

/*
 * Pipe output worker. This sets up our pipe format with the page cache
 * pipe buffer operations. Otherwise very similar to the regular pipe_writev().
 */
static ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
                              struct splice_pipe_desc *spd)
{
        int ret, do_wakeup, page_nr;

        ret = 0;
        do_wakeup = 0;
        page_nr = 0;

        if (pipe->inode)
                mutex_lock(&pipe->inode->i_mutex);

        for (;;) {
                if (!pipe->readers) {
                        send_sig(SIGPIPE, current, 0);
                        if (!ret)
                                ret = -EPIPE;
                        break;
                }

                if (pipe->nrbufs < PIPE_BUFFERS) {
                        int newbuf = (pipe->curbuf + pipe->nrbufs) & (PIPE_BUFFERS - 1);
                        struct pipe_buffer *buf = pipe->bufs + newbuf;

                        buf->page = spd->pages[page_nr];
                        buf->offset = spd->partial[page_nr].offset;
                        buf->len = spd->partial[page_nr].len;
                        buf->ops = spd->ops;
                        if (spd->flags & SPLICE_F_GIFT)
                                buf->flags |= PIPE_BUF_FLAG_GIFT;

                        pipe->nrbufs++;
                        page_nr++;
                        ret += buf->len;

                        if (pipe->inode)
                                do_wakeup = 1;

                        if (!--spd->nr_pages)
                                break;
                        if (pipe->nrbufs < PIPE_BUFFERS)
                                continue;

                        break;
                }

                if (spd->flags & SPLICE_F_NONBLOCK) {
                        if (!ret)
                                ret = -EAGAIN;
                        break;
                }

                if (signal_pending(current)) {
                        if (!ret)
                                ret = -ERESTARTSYS;
                        break;
                }

                if (do_wakeup) {
                        smp_mb();
                        if (waitqueue_active(&pipe->wait))
                                wake_up_interruptible_sync(&pipe->wait);
                        kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
                        do_wakeup = 0;
                }

                pipe->waiting_writers++;
                pipe_wait(pipe);
                pipe->waiting_writers--;
        }

        if (pipe->inode)
                mutex_unlock(&pipe->inode->i_mutex);

        if (do_wakeup) {
                smp_mb();
                if (waitqueue_active(&pipe->wait))
                        wake_up_interruptible(&pipe->wait);
                kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
        }

        while (page_nr < spd->nr_pages)
                page_cache_release(spd->pages[page_nr++]);

        return ret;
}

static int
__generic_file_splice_read(struct file *in, loff_t *ppos,
                           struct pipe_inode_info *pipe, size_t len,
                           unsigned int flags)
{
        struct address_space *mapping = in->f_mapping;
        unsigned int loff, nr_pages;
        struct page *pages[PIPE_BUFFERS];
        struct partial_page partial[PIPE_BUFFERS];
        struct page *page;
        pgoff_t index, end_index;
        loff_t isize;
        size_t total_len;
        int error, page_nr;
        struct splice_pipe_desc spd = {
                .pages = pages,
                .partial = partial,
                .flags = flags,
                .ops = &page_cache_pipe_buf_ops,
        };

        index = *ppos >> PAGE_CACHE_SHIFT;
        loff = *ppos & ~PAGE_CACHE_MASK;
        nr_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;

        if (nr_pages > PIPE_BUFFERS)
                nr_pages = PIPE_BUFFERS;

        /*
         * Initiate read-ahead on this page range. however, don't call into
         * read-ahead if this is a non-zero offset (we are likely doing small
         * chunk splice and the page is already there) for a single page.
         */
        if (!loff || nr_pages > 1)
                page_cache_readahead(mapping, &in->f_ra, in, index, nr_pages);

        /*
         * Now fill in the holes:
         */
        error = 0;
        total_len = 0;

        /*
         * Lookup the (hopefully) full range of pages we need.
         */
        spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages);

        /*
         * If find_get_pages_contig() returned fewer pages than we needed,
         * allocate the rest.
         */
        index += spd.nr_pages;
        while (spd.nr_pages < nr_pages) {
                /*
                 * Page could be there, find_get_pages_contig() breaks on
                 * the first hole.
                 */
                page = find_get_page(mapping, index);
                if (!page) {
                        /*
                         * Make sure the read-ahead engine is notified
                         * about this failure.
                         */
                        handle_ra_miss(mapping, &in->f_ra, index);

                        /*
                         * page didn't exist, allocate one.
                         */
                        page = page_cache_alloc_cold(mapping);
                        if (!page)
                                break;

                        error = add_to_page_cache_lru(page, mapping, index,
                                              GFP_KERNEL);
                        if (unlikely(error)) {
                                page_cache_release(page);
                                if (error == -EEXIST)
                                        continue;
                                break;
                        }
                        /*
                         * add_to_page_cache() locks the page, unlock it
                         * to avoid convoluting the logic below even more.
                         */
                        unlock_page(page);
                }

                pages[spd.nr_pages++] = page;
                index++;
        }

        /*
         * Now loop over the map and see if we need to start IO on any
         * pages, fill in the partial map, etc.
         */
        index = *ppos >> PAGE_CACHE_SHIFT;
        nr_pages = spd.nr_pages;
        spd.nr_pages = 0;
        for (page_nr = 0; page_nr < nr_pages; page_nr++) {
                unsigned int this_len;

                if (!len)
                        break;

                /*
                 * this_len is the max we'll use from this page
                 */
                this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);
                page = pages[page_nr];

                /*
                 * If the page isn't uptodate, we may need to start io on it
                 */
                if (!PageUptodate(page)) {
                        /*
                         * If in nonblock mode then dont block on waiting
                         * for an in-flight io page
                         */
                        if (flags & SPLICE_F_NONBLOCK)
                                break;

                        lock_page(page);

                        /*
                         * page was truncated, stop here. if this isn't the
                         * first page, we'll just complete what we already
                         * added
                         */
                        if (!page->mapping) {
                                unlock_page(page);
                                break;
                        }
                        /*
                         * page was already under io and is now done, great
                         */
                        if (PageUptodate(page)) {
                                unlock_page(page);
                                goto fill_it;
                        }

                        /*
                         * need to read in the page
                         */
                        error = mapping->a_ops->readpage(in, page);
                        if (unlikely(error)) {
                                /*
                                 * We really should re-lookup the page here,
                                 * but it complicates things a lot. Instead
                                 * lets just do what we already stored, and
                                 * we'll get it the next time we are called.
                                 */
                                if (error == AOP_TRUNCATED_PAGE)
                                        error = 0;

                                break;
                        }

                        /*
                         * i_size must be checked after ->readpage().
                         */
                        isize = i_size_read(mapping->host);
                        end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
                        if (unlikely(!isize || index > end_index))
                                break;

                        /*
                         * if this is the last page, see if we need to shrink
                         * the length and stop
                         */
                        if (end_index == index) {
                                loff = PAGE_CACHE_SIZE - (isize & ~PAGE_CACHE_MASK);
                                if (total_len + loff > isize)
                                        break;
                                /*
                                 * force quit after adding this page
                                 */
                                len = this_len;
                                this_len = min(this_len, loff);
                                loff = 0;
                        }
                }
fill_it:
                partial[page_nr].offset = loff;
                partial[page_nr].len = this_len;
                len -= this_len;
                total_len += this_len;
                loff = 0;
                spd.nr_pages++;
                index++;
        }

        /*
         * Release any pages at the end, if we quit early. 'i' is how far
         * we got, 'nr_pages' is how many pages are in the map.
         */
        while (page_nr < nr_pages)
                page_cache_release(pages[page_nr++]);

        if (spd.nr_pages)
                return splice_to_pipe(pipe, &spd);

        return error;
}

/**
 * generic_file_splice_read - splice data from file to a pipe
 * @in:         file to splice from
 * @pipe:       pipe to splice to
 * @len:        number of bytes to splice
 * @flags:      splice modifier flags
 *
 * Will read pages from given file and fill them into a pipe.
 */
ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
                                 struct pipe_inode_info *pipe, size_t len,
                                 unsigned int flags)
{
        ssize_t spliced;
        int ret;

        ret = 0;
        spliced = 0;

        while (len) {
                ret = __generic_file_splice_read(in, ppos, pipe, len, flags);

                if (ret < 0)
                        break;
                else if (!ret) {
                        if (spliced)
                                break;
                        if (flags & SPLICE_F_NONBLOCK) {
                                ret = -EAGAIN;
                                break;
                        }
                }

                *ppos += ret;
                len -= ret;
                spliced += ret;
        }

        if (spliced)
                return spliced;

        return ret;
}

EXPORT_SYMBOL(generic_file_splice_read);

/*
 * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
 * using sendpage(). Return the number of bytes sent.
 */
static int pipe_to_sendpage(struct pipe_inode_info *pipe,
                            struct pipe_buffer *buf, struct splice_desc *sd)
{
        struct file *file = sd->file;
        loff_t pos = sd->pos;
        int ret, more;

        ret = buf->ops->pin(pipe, buf);
        if (!ret) {
                more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;

                ret = file->f_op->sendpage(file, buf->page, buf->offset,
                                           sd->len, &pos, more);
        }

        return ret;
}

/*
 * This is a little more tricky than the file -> pipe splicing. There are
 * basically three cases:
 *
 *      - Destination page already exists in the address space and there
 *        are users of it. For that case we have no other option that
 *        copying the data. Tough luck.
 *      - Destination page already exists in the address space, but there
 *        are no users of it. Make sure it's uptodate, then drop it. Fall
 *        through to last case.
 *      - Destination page does not exist, we can add the pipe page to
 *        the page cache and avoid the copy.
 *
 * If asked to move pages to the output file (SPLICE_F_MOVE is set in
 * sd->flags), we attempt to migrate pages from the pipe to the output
 * file address space page cache. This is possible if no one else has
 * the pipe page referenced outside of the pipe and page cache. If
 * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
 * a new page in the output file page cache and fill/dirty that.
 */
static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
                        struct splice_desc *sd)
{
        struct file *file = sd->file;
        struct address_space *mapping = file->f_mapping;
        unsigned int offset, this_len;
        struct page *page;
        pgoff_t index;
        int ret;

        /*
         * make sure the data in this buffer is uptodate
         */
        ret = buf->ops->pin(pipe, buf);
        if (unlikely(ret))
                return ret;

        index = sd->pos >> PAGE_CACHE_SHIFT;
        offset = sd->pos & ~PAGE_CACHE_MASK;

        this_len = sd->len;
        if (this_len + offset > PAGE_CACHE_SIZE)
                this_len = PAGE_CACHE_SIZE - offset;

        /*
         * Reuse buf page, if SPLICE_F_MOVE is set and we are doing a full
         * page.
         */
        if ((sd->flags & SPLICE_F_MOVE) && this_len == PAGE_CACHE_SIZE) {
                /*
                 * If steal succeeds, buf->page is now pruned from the
                 * pagecache and we can reuse it. The page will also be
                 * locked on successful return.
                 */
                if (buf->ops->steal(pipe, buf))
                        goto find_page;

                page = buf->page;
                if (add_to_page_cache(page, mapping, index, GFP_KERNEL)) {
                        unlock_page(page);
                        goto find_page;
                }

                page_cache_get(page);

                if (!(buf->flags & PIPE_BUF_FLAG_LRU))
                        lru_cache_add(page);
        } else {
find_page:
                page = find_lock_page(mapping, index);
                if (!page) {
                        ret = -ENOMEM;
                        page = page_cache_alloc_cold(mapping);
                        if (unlikely(!page))
                                goto out_ret;

                        /*
                         * This will also lock the page
                         */
                        ret = add_to_page_cache_lru(page, mapping, index,
                                                    GFP_KERNEL);
                        if (unlikely(ret))
                                goto out;
                }

                /*
                 * We get here with the page locked. If the page is also
                 * uptodate, we don't need to do more. If it isn't, we
                 * may need to bring it in if we are not going to overwrite
                 * the full page.
                 */
                if (!PageUptodate(page)) {
                        if (this_len < PAGE_CACHE_SIZE) {
                                ret = mapping->a_ops->readpage(file, page);
                                if (unlikely(ret))
                                        goto out;

                                lock_page(page);

                                if (!PageUptodate(page)) {
                                        /*
                                         * Page got invalidated, repeat.
                                         */
                                        if (!page->mapping) {
                                                unlock_page(page);
                                                page_cache_release(page);
                                                goto find_page;
                                        }
                                        ret = -EIO;
                                        goto out;
                                }
                        } else
                                SetPageUptodate(page);
                }
        }

        ret = mapping->a_ops->prepare_write(file, page, offset, offset+this_len);
        if (unlikely(ret)) {
                loff_t isize = i_size_read(mapping->host);

                if (ret != AOP_TRUNCATED_PAGE)
                        unlock_page(page);
                page_cache_release(page);
                if (ret == AOP_TRUNCATED_PAGE)
                        goto find_page;

                /*
                 * prepare_write() may have instantiated a few blocks
                 * outside i_size.  Trim these off again.
                 */
                if (sd->pos + this_len > isize)
                        vmtruncate(mapping->host, isize);

                goto out_ret;
        }

        if (buf->page != page) {
                /*
                 * Careful, ->map() uses KM_USER0!
                 */
                char *src = buf->ops->map(pipe, buf, 1);
                char *dst = kmap_atomic(page, KM_USER1);

                memcpy(dst + offset, src + buf->offset, this_len);
                flush_dcache_page(page);
                kunmap_atomic(dst, KM_USER1);
                buf->ops->unmap(pipe, buf, src);
        }

        ret = mapping->a_ops->commit_write(file, page, offset, offset+this_len);
        if (!ret) {
                /*
                 * Return the number of bytes written and mark page as
                 * accessed, we are now done!
                 */
                ret = this_len;
                mark_page_accessed(page);
                balance_dirty_pages_ratelimited(mapping);
        } else if (ret == AOP_TRUNCATED_PAGE) {
                page_cache_release(page);
                goto find_page;
        }
out:
        page_cache_release(page);
        unlock_page(page);
out_ret:
        return ret;
}

/*
 * Pipe input worker. Most of this logic works like a regular pipe, the
 * key here is the 'actor' worker passed in that actually moves the data
 * to the wanted destination. See pipe_to_file/pipe_to_sendpage above.
 */
static ssize_t __splice_from_pipe(struct pipe_inode_info *pipe,
                                  struct file *out, loff_t *ppos, size_t len,
                                  unsigned int flags, splice_actor *actor)
{
        int ret, do_wakeup, err;
        struct splice_desc sd;

        ret = 0;
        do_wakeup = 0;

        sd.total_len = len;
        sd.flags = flags;
        sd.file = out;
        sd.pos = *ppos;

        for (;;) {
                if (pipe->nrbufs) {
                        struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
                        struct pipe_buf_operations *ops = buf->ops;

                        sd.len = buf->len;
                        if (sd.len > sd.total_len)
                                sd.len = sd.total_len;

                        err = actor(pipe, buf, &sd);
                        if (err <= 0) {
                                if (!ret && err != -ENODATA)
                                        ret = err;

                                break;
                        }

                        ret += err;
                        buf->offset += err;
                        buf->len -= err;

                        sd.len -= err;
                        sd.pos += err;
                        sd.total_len -= err;
                        if (sd.len)
                                continue;

                        if (!buf->len) {
                                buf->ops = NULL;
                                ops->release(pipe, buf);
                                pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
                                pipe->nrbufs--;
                                if (pipe->inode)
                                        do_wakeup = 1;
                        }

                        if (!sd.total_len)
                                break;
                }

                if (pipe->nrbufs)
                        continue;
                if (!pipe->writers)
                        break;
                if (!pipe->waiting_writers) {
                        if (ret)
                                break;
                }

                if (flags & SPLICE_F_NONBLOCK) {
                        if (!ret)
                                ret = -EAGAIN;
                        break;
                }

                if (signal_pending(current)) {
                        if (!ret)
                                ret = -ERESTARTSYS;
                        break;
                }

                if (do_wakeup) {
                        smp_mb();
                        if (waitqueue_active(&pipe->wait))
                                wake_up_interruptible_sync(&pipe->wait);
                        kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
                        do_wakeup = 0;
                }

                pipe_wait(pipe);
        }

        if (do_wakeup) {
                smp_mb();
                if (waitqueue_active(&pipe->wait))
                        wake_up_interruptible(&pipe->wait);
                kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
        }

        return ret;
}

ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
                         loff_t *ppos, size_t len, unsigned int flags,
                         splice_actor *actor)
{
        ssize_t ret;
        struct inode *inode = out->f_mapping->host;

        /*
         * The actor worker might be calling ->prepare_write and
         * ->commit_write. Most of the time, these expect i_mutex to
         * be held. Since this may result in an ABBA deadlock with
         * pipe->inode, we have to order lock acquiry here.
         */
        inode_double_lock(inode, pipe->inode);
        ret = __splice_from_pipe(pipe, out, ppos, len, flags, actor);
        inode_double_unlock(inode, pipe->inode);

        return ret;
}

/**
 * generic_file_splice_write_nolock - generic_file_splice_write without mutexes
 * @pipe:       pipe info
 * @out:        file to write to
 * @len:        number of bytes to splice
 * @flags:      splice modifier flags
 *
 * Will either move or copy pages (determined by @flags options) from
 * the given pipe inode to the given file. The caller is responsible
 * for acquiring i_mutex on both inodes.
 *
 */
ssize_t
generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
                                 loff_t *ppos, size_t len, unsigned int flags)
{
        struct address_space *mapping = out->f_mapping;
        struct inode *inode = mapping->host;
        ssize_t ret;
        int err;

        err = remove_suid(out->f_dentry);
        if (unlikely(err))
                return err;

        ret = __splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
        if (ret > 0) {
                *ppos += ret;

                /*
                 * If file or inode is SYNC and we actually wrote some data,
                 * sync it.
                 */
                if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
                        err = generic_osync_inode(inode, mapping,
                                                  OSYNC_METADATA|OSYNC_DATA);

                        if (err)
                                ret = err;
                }
        }

        return ret;
}

EXPORT_SYMBOL(generic_file_splice_write_nolock);

/**
 * generic_file_splice_write - splice data from a pipe to a file
 * @pipe:       pipe info
 * @out:        file to write to
 * @len:        number of bytes to splice
 * @flags:      splice modifier flags
 *
 * Will either move or copy pages (determined by @flags options) from
 * the given pipe inode to the given file.
 *
 */
ssize_t
generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
                          loff_t *ppos, size_t len, unsigned int flags)
{
        struct address_space *mapping = out->f_mapping;
        struct inode *inode = mapping->host;
        ssize_t ret;
        int err;

        err = should_remove_suid(out->f_dentry);
        if (unlikely(err)) {
                mutex_lock(&inode->i_mutex);
                err = __remove_suid(out->f_dentry, err);
                mutex_unlock(&inode->i_mutex);
                if (err)
                        return err;
        }

        ret = splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
        if (ret > 0) {
                *ppos += ret;

                /*
                 * If file or inode is SYNC and we actually wrote some data,
                 * sync it.
                 */
                if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
                        mutex_lock(&inode->i_mutex);
                        err = generic_osync_inode(inode, mapping,
                                                  OSYNC_METADATA|OSYNC_DATA);
                        mutex_unlock(&inode->i_mutex);

                        if (err)
                                ret = err;
                }
        }

        return ret;
}

EXPORT_SYMBOL(generic_file_splice_write);

/**
 * generic_splice_sendpage - splice data from a pipe to a socket
 * @inode:      pipe inode
 * @out:        socket to write to
 * @len:        number of bytes to splice
 * @flags:      splice modifier flags
 *
 * Will send @len bytes from the pipe to a network socket. No data copying
 * is involved.
 *
 */
ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
                                loff_t *ppos, size_t len, unsigned int flags)
{
        return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
}

EXPORT_SYMBOL(generic_splice_sendpage);

/*
 * Attempt to initiate a splice from pipe to file.
 */
static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
                           loff_t *ppos, size_t len, unsigned int flags)
{
        int ret;

        if (unlikely(!out->f_op || !out->f_op->splice_write))
                return -EINVAL;

        if (unlikely(!(out->f_mode & FMODE_WRITE)))
                return -EBADF;

        ret = rw_verify_area(WRITE, out, ppos, len);
        if (unlikely(ret < 0))
                return ret;

        return out->f_op->splice_write(pipe, out, ppos, len, flags);
}

/*
 * Attempt to initiate a splice from a file to a pipe.
 */
static long do_splice_to(struct file *in, loff_t *ppos,
                         struct pipe_inode_info *pipe, size_t len,
                         unsigned int flags)
{
        loff_t isize, left;
        int ret;

        if (unlikely(!in->f_op || !in->f_op->splice_read))
                return -EINVAL;

        if (unlikely(!(in->f_mode & FMODE_READ)))
                return -EBADF;

        ret = rw_verify_area(READ, in, ppos, len);
        if (unlikely(ret < 0))
                return ret;

        isize = i_size_read(in->f_mapping->host);
        if (unlikely(*ppos >= isize))
                return 0;
        
        left = isize - *ppos;
        if (unlikely(left < len))
                len = left;

        return in->f_op->splice_read(in, ppos, pipe, len, flags);
}

long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
                      size_t len, unsigned int flags)
{
        struct pipe_inode_info *pipe;
        long ret, bytes;
        loff_t out_off;
        umode_t i_mode;
        int i;

        /*
         * We require the input being a regular file, as we don't want to
         * randomly drop data for eg socket -> socket splicing. Use the
         * piped splicing for that!
         */
        i_mode = in->f_dentry->d_inode->i_mode;
        if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
                return -EINVAL;

        /*
         * neither in nor out is a pipe, setup an internal pipe attached to
         * 'out' and transfer the wanted data from 'in' to 'out' through that
         */
        pipe = current->splice_pipe;
        if (unlikely(!pipe)) {
                pipe = alloc_pipe_info(NULL);
                if (!pipe)
                        return -ENOMEM;

                /*
                 * We don't have an immediate reader, but we'll read the stuff
                 * out of the pipe right after the splice_to_pipe(). So set
                 * PIPE_READERS appropriately.
                 */
                pipe->readers = 1;

                current->splice_pipe = pipe;
        }

        /*
         * Do the splice.
         */
        ret = 0;
        bytes = 0;
        out_off = 0;

        while (len) {
                size_t read_len, max_read_len;

                /*
                 * Do at most PIPE_BUFFERS pages worth of transfer:
                 */
                max_read_len = min(len, (size_t)(PIPE_BUFFERS*PAGE_SIZE));

                ret = do_splice_to(in, ppos, pipe, max_read_len, flags);
                if (unlikely(ret < 0))
                        goto out_release;

                read_len = ret;

                /*
                 * NOTE: nonblocking mode only applies to the input. We
                 * must not do the output in nonblocking mode as then we
                 * could get stuck data in the internal pipe:
                 */
                ret = do_splice_from(pipe, out, &out_off, read_len,
                                     flags & ~SPLICE_F_NONBLOCK);
                if (unlikely(ret < 0))
                        goto out_release;

                bytes += ret;
                len -= ret;

                /*
                 * In nonblocking mode, if we got back a short read then
                 * that was due to either an IO error or due to the
                 * pagecache entry not being there. In the IO error case
                 * the _next_ splice attempt will produce a clean IO error
                 * return value (not a short read), so in both cases it's
                 * correct to break out of the loop here:
                 */
                if ((flags & SPLICE_F_NONBLOCK) && (read_len < max_read_len))
                        break;
        }

        pipe->nrbufs = pipe->curbuf = 0;

        return bytes;

out_release:
        /*
         * If we did an incomplete transfer we must release
         * the pipe buffers in question:
         */
        for (i = 0; i < PIPE_BUFFERS; i++) {
                struct pipe_buffer *buf = pipe->bufs + i;

                if (buf->ops) {
                        buf->ops->release(pipe, buf);
                        buf->ops = NULL;
                }
        }
        pipe->nrbufs = pipe->curbuf = 0;

        /*
         * If we transferred some data, return the number of bytes:
         */
        if (bytes > 0)
                return bytes;

        return ret;
}

EXPORT_SYMBOL(do_splice_direct);

/*
 * Determine where to splice to/from.
 */
static long do_splice(struct file *in, loff_t __user *off_in,
                      struct file *out, loff_t __user *off_out,
                      size_t len, unsigned int flags)
{
        struct pipe_inode_info *pipe;
        loff_t offset, *off;
        long ret;

        pipe = in->f_dentry->d_inode->i_pipe;
        if (pipe) {
                if (off_in)
                        return -ESPIPE;
                if (off_out) {
                        if (out->f_op->llseek == no_llseek)
                                return -EINVAL;
                        if (copy_from_user(&offset, off_out, sizeof(loff_t)))
                                return -EFAULT;
                        off = &offset;
                } else
                        off = &out->f_pos;

                ret = do_splice_from(pipe, out, off, len, flags);

                if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
                        ret = -EFAULT;

                return ret;
        }

        pipe = out->f_dentry->d_inode->i_pipe;
        if (pipe) {
                if (off_out)
                        return -ESPIPE;
                if (off_in) {
                        if (in->f_op->llseek == no_llseek)
                                return -EINVAL;
                        if (copy_from_user(&offset, off_in, sizeof(loff_t)))
                                return -EFAULT;
                        off = &offset;
                } else
                        off = &in->f_pos;

                ret = do_splice_to(in, off, pipe, len, flags);

                if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
                        ret = -EFAULT;

                return ret;
        }

        return -EINVAL;
}

/*
 * Map an iov into an array of pages and offset/length tupples. With the
 * partial_page structure, we can map several non-contiguous ranges into
 * our ones pages[] map instead of splitting that operation into pieces.
 * Could easily be exported as a generic helper for other users, in which
 * case one would probably want to add a 'max_nr_pages' parameter as well.
 */
static int get_iovec_page_array(const struct iovec __user *iov,
                                unsigned int nr_vecs, struct page **pages,
                                struct partial_page *partial, int aligned)
{
        int buffers = 0, error = 0;

        /*
         * It's ok to take the mmap_sem for reading, even
         * across a "get_user()".
         */
        down_read(&current->mm->mmap_sem);

        while (nr_vecs) {
                unsigned long off, npages;
                void __user *base;
                size_t len;
                int i;

                /*
                 * Get user address base and length for this iovec.
                 */
                error = get_user(base, &iov->iov_base);
                if (unlikely(error))
                        break;
                error = get_user(len, &iov->iov_len);
                if (unlikely(error))
                        break;

                /*
                 * Sanity check this iovec. 0 read succeeds.
                 */
                if (unlikely(!len))
                        break;
                error = -EFAULT;
                if (unlikely(!base))
                        break;

                /*
                 * Get this base offset and number of pages, then map
                 * in the user pages.
                 */
                off = (unsigned long) base & ~PAGE_MASK;

                /*
                 * If asked for alignment, the offset must be zero and the
                 * length a multiple of the PAGE_SIZE.
                 */
                error = -EINVAL;
                if (aligned && (off || len & ~PAGE_MASK))
                        break;

                npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
                if (npages > PIPE_BUFFERS - buffers)
                        npages = PIPE_BUFFERS - buffers;

                error = get_user_pages(current, current->mm,
                                       (unsigned long) base, npages, 0, 0,
                                       &pages[buffers], NULL);

                if (unlikely(error <= 0))
                        break;

                /*
                 * Fill this contiguous range into the partial page map.
                 */
                for (i = 0; i < error; i++) {
                        const int plen = min_t(size_t, len, PAGE_SIZE - off);

                        partial[buffers].offset = off;
                        partial[buffers].len = plen;

                        off = 0;
                        len -= plen;
                        buffers++;
                }

                /*
                 * We didn't complete this iov, stop here since it probably
                 * means we have to move some of this into a pipe to
                 * be able to continue.
                 */
                if (len)
                        break;

                /*
                 * Don't continue if we mapped fewer pages than we asked for,
                 * or if we mapped the max number of pages that we have
                 * room for.
                 */
                if (error < npages || buffers == PIPE_BUFFERS)
                        break;

                nr_vecs--;
                iov++;
        }

        up_read(&current->mm->mmap_sem);

        if (buffers)
                return buffers;

        return error;
}

/*
 * vmsplice splices a user address range into a pipe. It can be thought of
 * as splice-from-memory, where the regular splice is splice-from-file (or
 * to file). In both cases the output is a pipe, naturally.
 *
 * Note that vmsplice only supports splicing _from_ user memory to a pipe,
 * not the other way around. Splicing from user memory is a simple operation
 * that can be supported without any funky alignment restrictions or nasty
 * vm tricks. We simply map in the user memory and fill them into a pipe.
 * The reverse isn't quite as easy, though. There are two possible solutions
 * for that:
 *
 *      - memcpy() the data internally, at which point we might as well just
 *        do a regular read() on the buffer anyway.
 *      - Lots of nasty vm tricks, that are neither fast nor flexible (it
 *        has restriction limitations on both ends of the pipe).
 *
 * Alas, it isn't here.
 *
 */
static long do_vmsplice(struct file *file, const struct iovec __user *iov,
                        unsigned long nr_segs, unsigned int flags)
{
        struct pipe_inode_info *pipe = file->f_dentry->d_inode->i_pipe;
        struct page *pages[PIPE_BUFFERS];
        struct partial_page partial[PIPE_BUFFERS];
        struct splice_pipe_desc spd = {
                .pages = pages,
                .partial = partial,
                .flags = flags,
                .ops = &user_page_pipe_buf_ops,
        };

        if (unlikely(!pipe))
                return -EBADF;
        if (unlikely(nr_segs > UIO_MAXIOV))
                return -EINVAL;
        else if (unlikely(!nr_segs))
                return 0;

        spd.nr_pages = get_iovec_page_array(iov, nr_segs, pages, partial,
                                            flags & SPLICE_F_GIFT);
        if (spd.nr_pages <= 0)
                return spd.nr_pages;

        return splice_to_pipe(pipe, &spd);
}

asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
                             unsigned long nr_segs, unsigned int flags)
{
        struct file *file;
        long error;
        int fput;

        error = -EBADF;
        file = fget_light(fd, &fput);
        if (file) {
                if (file->f_mode & FMODE_WRITE)
                        error = do_vmsplice(file, iov, nr_segs, flags);

                fput_light(file, fput);
        }

        return error;
}

asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
                           int fd_out, loff_t __user *off_out,
                           size_t len, unsigned int flags)
{
        long error;
        struct file *in, *out;
        int fput_in, fput_out;

        if (unlikely(!len))
                return 0;

        error = -EBADF;
        in = fget_light(fd_in, &fput_in);
        if (in) {
                if (in->f_mode & FMODE_READ) {
                        out = fget_light(fd_out, &fput_out);
                        if (out) {
                                if (out->f_mode & FMODE_WRITE)
                                        error = do_splice(in, off_in,
                                                          out, off_out,
                                                          len, flags);
                                fput_light(out, fput_out);
                        }
                }

                fput_light(in, fput_in);
        }

        return error;
}

/*
 * Make sure there's data to read. Wait for input if we can, otherwise
 * return an appropriate error.
 */
static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
{
        int ret;

        /*
         * Check ->nrbufs without the inode lock first. This function
         * is speculative anyways, so missing one is ok.
         */
        if (pipe->nrbufs)
                return 0;

        ret = 0;
        mutex_lock(&pipe->inode->i_mutex);

        while (!pipe->nrbufs) {
                if (signal_pending(current)) {
                        ret = -ERESTARTSYS;
                        break;
                }
                if (!pipe->writers)
                        break;
                if (!pipe->waiting_writers) {
                        if (flags & SPLICE_F_NONBLOCK) {
                                ret = -EAGAIN;
                                break;
                        }
                }
                pipe_wait(pipe);
        }

        mutex_unlock(&pipe->inode->i_mutex);
        return ret;
}

/*
 * Make sure there's writeable room. Wait for room if we can, otherwise
 * return an appropriate error.
 */
static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
{
        int ret;

        /*
         * Check ->nrbufs without the inode lock first. This function
         * is speculative anyways, so missing one is ok.
         */
        if (pipe->nrbufs < PIPE_BUFFERS)
                return 0;

        ret = 0;
        mutex_lock(&pipe->inode->i_mutex);

        while (pipe->nrbufs >= PIPE_BUFFERS) {
                if (!pipe->readers) {
                        send_sig(SIGPIPE, current, 0);
                        ret = -EPIPE;
                        break;
                }
                if (flags & SPLICE_F_NONBLOCK) {
                        ret = -EAGAIN;
                        break;
                }
                if (signal_pending(current)) {
                        ret = -ERESTARTSYS;
                        break;
                }
                pipe->waiting_writers++;
                pipe_wait(pipe);
                pipe->waiting_writers--;
        }

        mutex_unlock(&pipe->inode->i_mutex);
        return ret;
}

/*
 * Link contents of ipipe to opipe.
 */
static int link_pipe(struct pipe_inode_info *ipipe,
                     struct pipe_inode_info *opipe,
                     size_t len, unsigned int flags)
{
        struct pipe_buffer *ibuf, *obuf;
        int ret = 0, i = 0, nbuf;

        /*
         * Potential ABBA deadlock, work around it by ordering lock
         * grabbing by inode address. Otherwise two different processes
         * could deadlock (one doing tee from A -> B, the other from B -> A).
         */
        inode_double_lock(ipipe->inode, opipe->inode);

        do {
                if (!opipe->readers) {
                        send_sig(SIGPIPE, current, 0);
                        if (!ret)
                                ret = -EPIPE;
                        break;
                }

                /*
                 * If we have iterated all input buffers or ran out of
                 * output room, break.
                 */
                if (i >= ipipe->nrbufs || opipe->nrbufs >= PIPE_BUFFERS)
                        break;

                ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
                nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);

                /*
                 * Get a reference to this pipe buffer,
                 * so we can copy the contents over.
                 */
                ibuf->ops->get(ipipe, ibuf);

                obuf = opipe->bufs + nbuf;
                *obuf = *ibuf;

                /*
                 * Don't inherit the gift flag, we need to
                 * prevent multiple steals of this page.
                 */
                obuf->flags &= ~PIPE_BUF_FLAG_GIFT;

                if (obuf->len > len)
                        obuf->len = len;

                opipe->nrbufs++;
                ret += obuf->len;
                len -= obuf->len;
                i++;
        } while (len);

        inode_double_unlock(ipipe->inode, opipe->inode);

        /*
         * If we put data in the output pipe, wakeup any potential readers.
         */
        if (ret > 0) {
                smp_mb();
                if (waitqueue_active(&opipe->wait))
                        wake_up_interruptible(&opipe->wait);
                kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
        }

        return ret;
}

/*
 * This is a tee(1) implementation that works on pipes. It doesn't copy
 * any data, it simply references the 'in' pages on the 'out' pipe.
 * The 'flags' used are the SPLICE_F_* variants, currently the only
 * applicable one is SPLICE_F_NONBLOCK.
 */
static long do_tee(struct file *in, struct file *out, size_t len,
                   unsigned int flags)
{
        struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe;
        struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe;
        int ret = -EINVAL;

        /*
         * Duplicate the contents of ipipe to opipe without actually
         * copying the data.
         */
        if (ipipe && opipe && ipipe != opipe) {
                /*
                 * Keep going, unless we encounter an error. The ipipe/opipe
                 * ordering doesn't really matter.
                 */
                ret = link_ipipe_prep(ipipe, flags);
                if (!ret) {
                        ret = link_opipe_prep(opipe, flags);
                        if (!ret) {
                                ret = link_pipe(ipipe, opipe, len, flags);
                                if (!ret && (flags & SPLICE_F_NONBLOCK))
                                        ret = -EAGAIN;
                        }
                }
        }

        return ret;
}

asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
{
        struct file *in;
        int error, fput_in;

        if (unlikely(!len))
                return 0;

        error = -EBADF;
        in = fget_light(fdin, &fput_in);
        if (in) {
                if (in->f_mode & FMODE_READ) {
                        int fput_out;
                        struct file *out = fget_light(fdout, &fput_out);

                        if (out) {
                                if (out->f_mode & FMODE_WRITE)
                                        error = do_tee(in, out, len, flags);
                                fput_light(out, fput_out);
                        }
                }
                fput_light(in, fput_in);
        }

        return error;
}