?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
pcmcia: CompactFlash driver for PA Semi Electra boards
[pv_ops_mirror.git] / drivers / hwmon / abituguru3.c
blobcb2331bfd9d5a0f040c49e61fdba8fe0daca7111
1 /*
2 abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
3
4 This program is free software; you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation; either version 2 of the License, or
7 (at your option) any later version.
8
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
13
14 You should have received a copy of the GNU General Public License
15 along with this program; if not, write to the Free Software
16 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18 /*
19 This driver supports the sensor part of revision 3 of the custom Abit uGuru
20 chip found on newer Abit uGuru motherboards. Note: because of lack of specs
21 only reading the sensors and their settings is supported.
22 */
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/slab.h>
26 #include <linux/jiffies.h>
27 #include <linux/mutex.h>
28 #include <linux/err.h>
29 #include <linux/delay.h>
30 #include <linux/platform_device.h>
31 #include <linux/hwmon.h>
32 #include <linux/hwmon-sysfs.h>
33 #include <asm/io.h>
34
35 /* uGuru3 bank addresses */
36 #define ABIT_UGURU3_SETTINGS_BANK 0x01
37 #define ABIT_UGURU3_SENSORS_BANK 0x08
38 #define ABIT_UGURU3_MISC_BANK 0x09
39 #define ABIT_UGURU3_ALARMS_START 0x1E
40 #define ABIT_UGURU3_SETTINGS_START 0x24
41 #define ABIT_UGURU3_VALUES_START 0x80
42 #define ABIT_UGURU3_BOARD_ID 0x0A
43 /* uGuru3 sensor bank flags */ /* Alarm if: */
44 #define ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE 0x01 /* temp over warn */
45 #define ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE 0x02 /* volt over max */
46 #define ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE 0x04 /* volt under min */
47 #define ABIT_UGURU3_TEMP_HIGH_ALARM_FLAG 0x10 /* temp is over warn */
48 #define ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG 0x20 /* volt is over max */
49 #define ABIT_UGURU3_VOLT_LOW_ALARM_FLAG 0x40 /* volt is under min */
50 #define ABIT_UGURU3_FAN_LOW_ALARM_ENABLE 0x01 /* fan under min */
51 #define ABIT_UGURU3_BEEP_ENABLE 0x08 /* beep if alarm */
52 #define ABIT_UGURU3_SHUTDOWN_ENABLE 0x80 /* shutdown if alarm */
53 /* sensor types */
54 #define ABIT_UGURU3_IN_SENSOR 0
55 #define ABIT_UGURU3_TEMP_SENSOR 1
56 #define ABIT_UGURU3_FAN_SENSOR 2
57
58 /* Timeouts / Retries, if these turn out to need a lot of fiddling we could
59 convert them to params. Determined by trial and error. I assume this is
60 cpu-speed independent, since the ISA-bus and not the CPU should be the
61 bottleneck. */
62 #define ABIT_UGURU3_WAIT_TIMEOUT 250
63 /* Normally the 0xAC at the end of synchronize() is reported after the
64 first read, but sometimes not and we need to poll */
65 #define ABIT_UGURU3_SYNCHRONIZE_TIMEOUT 5
66 /* utility macros */
67 #define ABIT_UGURU3_NAME "abituguru3"
68 #define ABIT_UGURU3_DEBUG(format, arg...) \
69 if (verbose) \
70 printk(KERN_DEBUG ABIT_UGURU3_NAME ": " format , ## arg)
71
72 /* Macros to help calculate the sysfs_names array length */
73 #define ABIT_UGURU3_MAX_NO_SENSORS 26
74 /* sum of strlen +1 of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0,
75 in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0, in??_label\0 */
76 #define ABIT_UGURU3_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14 + 11)
77 /* sum of strlen +1 of: temp??_input\0, temp??_max\0, temp??_crit\0,
78 temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0,
79 temp??_label\0 */
80 #define ABIT_UGURU3_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16 + 13)
81 /* sum of strlen +1 of: fan??_input\0, fan??_min\0, fan??_alarm\0,
82 fan??_alarm_enable\0, fan??_beep\0, fan??_shutdown\0, fan??_label\0 */
83 #define ABIT_UGURU3_FAN_NAMES_LENGTH (12 + 10 + 12 + 19 + 11 + 15 + 12)
84 /* Worst case scenario 16 in sensors (longest names_length) and the rest
85 temp sensors (second longest names_length). */
86 #define ABIT_UGURU3_SYSFS_NAMES_LENGTH (16 * ABIT_UGURU3_IN_NAMES_LENGTH + \
87 (ABIT_UGURU3_MAX_NO_SENSORS - 16) * ABIT_UGURU3_TEMP_NAMES_LENGTH)
88
89 /* All the macros below are named identical to the openguru2 program
90 reverse engineered by Louis Kruger, hence the names might not be 100%
91 logical. I could come up with better names, but I prefer keeping the names
92 identical so that this driver can be compared with his work more easily. */
93 /* Two i/o-ports are used by uGuru */
94 #define ABIT_UGURU3_BASE 0x00E0
95 #define ABIT_UGURU3_CMD 0x00
96 #define ABIT_UGURU3_DATA 0x04
97 #define ABIT_UGURU3_REGION_LENGTH 5
98 /* The wait_xxx functions return this on success and the last contents
99 of the DATA register (0-255) on failure. */
100 #define ABIT_UGURU3_SUCCESS -1
101 /* uGuru status flags */
102 #define ABIT_UGURU3_STATUS_READY_FOR_READ 0x01
103 #define ABIT_UGURU3_STATUS_BUSY 0x02
104
105
106 /* Structures */
107 struct abituguru3_sensor_info {
108 const char* name;
109 int port;
110 int type;
111 int multiplier;
112 int divisor;
113 int offset;
114 };
115
116 struct abituguru3_motherboard_info {
117 u16 id;
118 const char *name;
119 /* + 1 -> end of sensors indicated by a sensor with name == NULL */
120 struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
121 };
122
123 /* For the Abit uGuru, we need to keep some data in memory.
124 The structure is dynamically allocated, at the same time when a new
125 abituguru3 device is allocated. */
126 struct abituguru3_data {
127 struct device *hwmon_dev; /* hwmon registered device */
128 struct mutex update_lock; /* protect access to data and uGuru */
129 unsigned short addr; /* uguru base address */
130 char valid; /* !=0 if following fields are valid */
131 unsigned long last_updated; /* In jiffies */
132
133 /* For convenience the sysfs attr and their names are generated
134 automatically. We have max 10 entries per sensor (for in sensors) */
135 struct sensor_device_attribute_2 sysfs_attr[ABIT_UGURU3_MAX_NO_SENSORS
136 * 10];
137
138 /* Buffer to store the dynamically generated sysfs names */
139 char sysfs_names[ABIT_UGURU3_SYSFS_NAMES_LENGTH];
140
141 /* Pointer to the sensors info for the detected motherboard */
142 const struct abituguru3_sensor_info *sensors;
143
144 /* The abituguru3 supports upto 48 sensors, and thus has registers
145 sets for 48 sensors, for convienence reasons / simplicity of the
146 code we always read and store all registers for all 48 sensors */
147
148 /* Alarms for all 48 sensors (1 bit per sensor) */
149 u8 alarms[48/8];
150
151 /* Value of all 48 sensors */
152 u8 value[48];
153
154 /* Settings of all 48 sensors, note in and temp sensors (the first 32
155 sensors) have 3 bytes of settings, while fans only have 2 bytes,
156 for convenience we use 3 bytes for all sensors */
157 u8 settings[48][3];
158 };
159
160
161 /* Constants */
162 static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
163 { 0x000C, "unknown", {
164 { "CPU Core", 0, 0, 10, 1, 0 },
165 { "DDR", 1, 0, 10, 1, 0 },
166 { "DDR VTT", 2, 0, 10, 1, 0 },
167 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
168 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
169 { "MCH 2.5V", 5, 0, 20, 1, 0 },
170 { "ICH 1.05V", 6, 0, 10, 1, 0 },
171 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
172 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
173 { "ATX +5V", 9, 0, 30, 1, 0 },
174 { "+3.3V", 10, 0, 20, 1, 0 },
175 { "5VSB", 11, 0, 30, 1, 0 },
176 { "CPU", 24, 1, 1, 1, 0 },
177 { "System ", 25, 1, 1, 1, 0 },
178 { "PWM", 26, 1, 1, 1, 0 },
179 { "CPU Fan", 32, 2, 60, 1, 0 },
180 { "NB Fan", 33, 2, 60, 1, 0 },
181 { "SYS FAN", 34, 2, 60, 1, 0 },
182 { "AUX1 Fan", 35, 2, 60, 1, 0 },
183 { NULL, 0, 0, 0, 0, 0 } }
184 },
185 { 0x000D, "Abit AW8", {
186 { "CPU Core", 0, 0, 10, 1, 0 },
187 { "DDR", 1, 0, 10, 1, 0 },
188 { "DDR VTT", 2, 0, 10, 1, 0 },
189 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
190 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
191 { "MCH 2.5V", 5, 0, 20, 1, 0 },
192 { "ICH 1.05V", 6, 0, 10, 1, 0 },
193 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
194 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
195 { "ATX +5V", 9, 0, 30, 1, 0 },
196 { "+3.3V", 10, 0, 20, 1, 0 },
197 { "5VSB", 11, 0, 30, 1, 0 },
198 { "CPU", 24, 1, 1, 1, 0 },
199 { "System ", 25, 1, 1, 1, 0 },
200 { "PWM1", 26, 1, 1, 1, 0 },
201 { "PWM2", 27, 1, 1, 1, 0 },
202 { "PWM3", 28, 1, 1, 1, 0 },
203 { "PWM4", 29, 1, 1, 1, 0 },
204 { "CPU Fan", 32, 2, 60, 1, 0 },
205 { "NB Fan", 33, 2, 60, 1, 0 },
206 { "SYS Fan", 34, 2, 60, 1, 0 },
207 { "AUX1 Fan", 35, 2, 60, 1, 0 },
208 { "AUX2 Fan", 36, 2, 60, 1, 0 },
209 { "AUX3 Fan", 37, 2, 60, 1, 0 },
210 { "AUX4 Fan", 38, 2, 60, 1, 0 },
211 { "AUX5 Fan", 39, 2, 60, 1, 0 },
212 { NULL, 0, 0, 0, 0, 0 } }
213 },
214 { 0x000E, "AL-8", {
215 { "CPU Core", 0, 0, 10, 1, 0 },
216 { "DDR", 1, 0, 10, 1, 0 },
217 { "DDR VTT", 2, 0, 10, 1, 0 },
218 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
219 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
220 { "MCH 2.5V", 5, 0, 20, 1, 0 },
221 { "ICH 1.05V", 6, 0, 10, 1, 0 },
222 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
223 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
224 { "ATX +5V", 9, 0, 30, 1, 0 },
225 { "+3.3V", 10, 0, 20, 1, 0 },
226 { "5VSB", 11, 0, 30, 1, 0 },
227 { "CPU", 24, 1, 1, 1, 0 },
228 { "System ", 25, 1, 1, 1, 0 },
229 { "PWM", 26, 1, 1, 1, 0 },
230 { "CPU Fan", 32, 2, 60, 1, 0 },
231 { "NB Fan", 33, 2, 60, 1, 0 },
232 { "SYS Fan", 34, 2, 60, 1, 0 },
233 { NULL, 0, 0, 0, 0, 0 } }
234 },
235 { 0x000F, "unknown", {
236 { "CPU Core", 0, 0, 10, 1, 0 },
237 { "DDR", 1, 0, 10, 1, 0 },
238 { "DDR VTT", 2, 0, 10, 1, 0 },
239 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
240 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
241 { "MCH 2.5V", 5, 0, 20, 1, 0 },
242 { "ICH 1.05V", 6, 0, 10, 1, 0 },
243 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
244 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
245 { "ATX +5V", 9, 0, 30, 1, 0 },
246 { "+3.3V", 10, 0, 20, 1, 0 },
247 { "5VSB", 11, 0, 30, 1, 0 },
248 { "CPU", 24, 1, 1, 1, 0 },
249 { "System ", 25, 1, 1, 1, 0 },
250 { "PWM", 26, 1, 1, 1, 0 },
251 { "CPU Fan", 32, 2, 60, 1, 0 },
252 { "NB Fan", 33, 2, 60, 1, 0 },
253 { "SYS Fan", 34, 2, 60, 1, 0 },
254 { NULL, 0, 0, 0, 0, 0 } }
255 },
256 { 0x0010, "Abit NI8 SLI GR", {
257 { "CPU Core", 0, 0, 10, 1, 0 },
258 { "DDR", 1, 0, 10, 1, 0 },
259 { "DDR VTT", 2, 0, 10, 1, 0 },
260 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
261 { "NB 1.4V", 4, 0, 10, 1, 0 },
262 { "SB 1.5V", 6, 0, 10, 1, 0 },
263 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
264 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
265 { "ATX +5V", 9, 0, 30, 1, 0 },
266 { "+3.3V", 10, 0, 20, 1, 0 },
267 { "5VSB", 11, 0, 30, 1, 0 },
268 { "CPU", 24, 1, 1, 1, 0 },
269 { "SYS", 25, 1, 1, 1, 0 },
270 { "PWM", 26, 1, 1, 1, 0 },
271 { "CPU Fan", 32, 2, 60, 1, 0 },
272 { "NB Fan", 33, 2, 60, 1, 0 },
273 { "SYS Fan", 34, 2, 60, 1, 0 },
274 { "AUX1 Fan", 35, 2, 60, 1, 0 },
275 { "OTES1 Fan", 36, 2, 60, 1, 0 },
276 { NULL, 0, 0, 0, 0, 0 } }
277 },
278 { 0x0011, "Abit AT8 32X", {
279 { "CPU Core", 0, 0, 10, 1, 0 },
280 { "DDR", 1, 0, 20, 1, 0 },
281 { "DDR VTT", 2, 0, 10, 1, 0 },
282 { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 },
283 { "NB 1.8V", 4, 0, 10, 1, 0 },
284 { "NB 1.8V Dual", 5, 0, 10, 1, 0 },
285 { "HTV 1.2", 3, 0, 10, 1, 0 },
286 { "PCIE 1.2V", 12, 0, 10, 1, 0 },
287 { "NB 1.2V", 13, 0, 10, 1, 0 },
288 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
289 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
290 { "ATX +5V", 9, 0, 30, 1, 0 },
291 { "+3.3V", 10, 0, 20, 1, 0 },
292 { "5VSB", 11, 0, 30, 1, 0 },
293 { "CPU", 24, 1, 1, 1, 0 },
294 { "NB", 25, 1, 1, 1, 0 },
295 { "System", 26, 1, 1, 1, 0 },
296 { "PWM", 27, 1, 1, 1, 0 },
297 { "CPU Fan", 32, 2, 60, 1, 0 },
298 { "NB Fan", 33, 2, 60, 1, 0 },
299 { "SYS Fan", 34, 2, 60, 1, 0 },
300 { "AUX1 Fan", 35, 2, 60, 1, 0 },
301 { "AUX2 Fan", 36, 2, 60, 1, 0 },
302 { NULL, 0, 0, 0, 0, 0 } }
303 },
304 { 0x0012, "Abit AN8 32X", {
305 { "CPU Core", 0, 0, 10, 1, 0 },
306 { "DDR", 1, 0, 20, 1, 0 },
307 { "DDR VTT", 2, 0, 10, 1, 0 },
308 { "HyperTransport", 3, 0, 10, 1, 0 },
309 { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 },
310 { "NB", 4, 0, 10, 1, 0 },
311 { "SB", 6, 0, 10, 1, 0 },
312 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
313 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
314 { "ATX +5V", 9, 0, 30, 1, 0 },
315 { "+3.3V", 10, 0, 20, 1, 0 },
316 { "5VSB", 11, 0, 30, 1, 0 },
317 { "CPU", 24, 1, 1, 1, 0 },
318 { "SYS", 25, 1, 1, 1, 0 },
319 { "PWM", 26, 1, 1, 1, 0 },
320 { "CPU Fan", 32, 2, 60, 1, 0 },
321 { "NB Fan", 33, 2, 60, 1, 0 },
322 { "SYS Fan", 34, 2, 60, 1, 0 },
323 { "AUX1 Fan", 36, 2, 60, 1, 0 },
324 { NULL, 0, 0, 0, 0, 0 } }
325 },
326 { 0x0013, "unknown", {
327 { "CPU Core", 0, 0, 10, 1, 0 },
328 { "DDR", 1, 0, 10, 1, 0 },
329 { "DDR VTT", 2, 0, 10, 1, 0 },
330 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
331 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
332 { "MCH 2.5V", 5, 0, 20, 1, 0 },
333 { "ICH 1.05V", 6, 0, 10, 1, 0 },
334 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
335 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
336 { "ATX +5V", 9, 0, 30, 1, 0 },
337 { "+3.3V", 10, 0, 20, 1, 0 },
338 { "5VSB", 11, 0, 30, 1, 0 },
339 { "CPU", 24, 1, 1, 1, 0 },
340 { "System ", 25, 1, 1, 1, 0 },
341 { "PWM1", 26, 1, 1, 1, 0 },
342 { "PWM2", 27, 1, 1, 1, 0 },
343 { "PWM3", 28, 1, 1, 1, 0 },
344 { "PWM4", 29, 1, 1, 1, 0 },
345 { "CPU Fan", 32, 2, 60, 1, 0 },
346 { "NB Fan", 33, 2, 60, 1, 0 },
347 { "SYS Fan", 34, 2, 60, 1, 0 },
348 { "AUX1 Fan", 35, 2, 60, 1, 0 },
349 { "AUX2 Fan", 36, 2, 60, 1, 0 },
350 { "AUX3 Fan", 37, 2, 60, 1, 0 },
351 { "AUX4 Fan", 38, 2, 60, 1, 0 },
352 { NULL, 0, 0, 0, 0, 0 } }
353 },
354 { 0x0014, "Abit AB9 Pro", {
355 { "CPU Core", 0, 0, 10, 1, 0 },
356 { "DDR", 1, 0, 10, 1, 0 },
357 { "DDR VTT", 2, 0, 10, 1, 0 },
358 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
359 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
360 { "MCH 2.5V", 5, 0, 20, 1, 0 },
361 { "ICH 1.05V", 6, 0, 10, 1, 0 },
362 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
363 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
364 { "ATX +5V", 9, 0, 30, 1, 0 },
365 { "+3.3V", 10, 0, 20, 1, 0 },
366 { "5VSB", 11, 0, 30, 1, 0 },
367 { "CPU", 24, 1, 1, 1, 0 },
368 { "System ", 25, 1, 1, 1, 0 },
369 { "PWM", 26, 1, 1, 1, 0 },
370 { "CPU Fan", 32, 2, 60, 1, 0 },
371 { "NB Fan", 33, 2, 60, 1, 0 },
372 { "SYS Fan", 34, 2, 60, 1, 0 },
373 { NULL, 0, 0, 0, 0, 0 } }
374 },
375 { 0x0015, "unknown", {
376 { "CPU Core", 0, 0, 10, 1, 0 },
377 { "DDR", 1, 0, 20, 1, 0 },
378 { "DDR VTT", 2, 0, 10, 1, 0 },
379 { "HyperTransport", 3, 0, 10, 1, 0 },
380 { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 },
381 { "NB", 4, 0, 10, 1, 0 },
382 { "SB", 6, 0, 10, 1, 0 },
383 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
384 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
385 { "ATX +5V", 9, 0, 30, 1, 0 },
386 { "+3.3V", 10, 0, 20, 1, 0 },
387 { "5VSB", 11, 0, 30, 1, 0 },
388 { "CPU", 24, 1, 1, 1, 0 },
389 { "SYS", 25, 1, 1, 1, 0 },
390 { "PWM", 26, 1, 1, 1, 0 },
391 { "CPU Fan", 32, 2, 60, 1, 0 },
392 { "NB Fan", 33, 2, 60, 1, 0 },
393 { "SYS Fan", 34, 2, 60, 1, 0 },
394 { "AUX1 Fan", 33, 2, 60, 1, 0 },
395 { "AUX2 Fan", 35, 2, 60, 1, 0 },
396 { "AUX3 Fan", 36, 2, 60, 1, 0 },
397 { NULL, 0, 0, 0, 0, 0 } }
398 },
399 { 0x0016, "AW9D-MAX", {
400 { "CPU Core", 0, 0, 10, 1, 0 },
401 { "DDR2", 1, 0, 20, 1, 0 },
402 { "DDR2 VTT", 2, 0, 10, 1, 0 },
403 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
404 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
405 { "MCH 2.5V", 5, 0, 20, 1, 0 },
406 { "ICH 1.05V", 6, 0, 10, 1, 0 },
407 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
408 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
409 { "ATX +5V", 9, 0, 30, 1, 0 },
410 { "+3.3V", 10, 0, 20, 1, 0 },
411 { "5VSB", 11, 0, 30, 1, 0 },
412 { "CPU", 24, 1, 1, 1, 0 },
413 { "System ", 25, 1, 1, 1, 0 },
414 { "PWM1", 26, 1, 1, 1, 0 },
415 { "PWM2", 27, 1, 1, 1, 0 },
416 { "PWM3", 28, 1, 1, 1, 0 },
417 { "PWM4", 29, 1, 1, 1, 0 },
418 { "CPU Fan", 32, 2, 60, 1, 0 },
419 { "NB Fan", 33, 2, 60, 1, 0 },
420 { "SYS Fan", 34, 2, 60, 1, 0 },
421 { "AUX1 Fan", 35, 2, 60, 1, 0 },
422 { "AUX2 Fan", 36, 2, 60, 1, 0 },
423 { "AUX3 Fan", 37, 2, 60, 1, 0 },
424 { "OTES1 Fan", 38, 2, 60, 1, 0 },
425 { NULL, 0, 0, 0, 0, 0 } }
426 },
427 { 0x0017, "unknown", {
428 { "CPU Core", 0, 0, 10, 1, 0 },
429 { "DDR2", 1, 0, 20, 1, 0 },
430 { "DDR2 VTT", 2, 0, 10, 1, 0 },
431 { "HyperTransport", 3, 0, 10, 1, 0 },
432 { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 },
433 { "NB 1.8V", 4, 0, 10, 1, 0 },
434 { "NB 1.2V ", 13, 0, 10, 1, 0 },
435 { "SB 1.2V", 5, 0, 10, 1, 0 },
436 { "PCIE 1.2V", 12, 0, 10, 1, 0 },
437 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
438 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
439 { "ATX +5V", 9, 0, 30, 1, 0 },
440 { "ATX +3.3V", 10, 0, 20, 1, 0 },
441 { "ATX 5VSB", 11, 0, 30, 1, 0 },
442 { "CPU", 24, 1, 1, 1, 0 },
443 { "System ", 26, 1, 1, 1, 0 },
444 { "PWM", 27, 1, 1, 1, 0 },
445 { "CPU FAN", 32, 2, 60, 1, 0 },
446 { "SYS FAN", 34, 2, 60, 1, 0 },
447 { "AUX1 FAN", 35, 2, 60, 1, 0 },
448 { "AUX2 FAN", 36, 2, 60, 1, 0 },
449 { "AUX3 FAN", 37, 2, 60, 1, 0 },
450 { NULL, 0, 0, 0, 0, 0 } }
451 },
452 { 0x0018, "unknown", {
453 { "CPU Core", 0, 0, 10, 1, 0 },
454 { "DDR2", 1, 0, 20, 1, 0 },
455 { "DDR2 VTT", 2, 0, 10, 1, 0 },
456 { "CPU VTT", 3, 0, 10, 1, 0 },
457 { "MCH 1.25V", 4, 0, 10, 1, 0 },
458 { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
459 { "ICH 1.05V", 6, 0, 10, 1, 0 },
460 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
461 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
462 { "ATX +5V", 9, 0, 30, 1, 0 },
463 { "+3.3V", 10, 0, 20, 1, 0 },
464 { "5VSB", 11, 0, 30, 1, 0 },
465 { "CPU", 24, 1, 1, 1, 0 },
466 { "System ", 25, 1, 1, 1, 0 },
467 { "PWM Phase1", 26, 1, 1, 1, 0 },
468 { "PWM Phase2", 27, 1, 1, 1, 0 },
469 { "PWM Phase3", 28, 1, 1, 1, 0 },
470 { "PWM Phase4", 29, 1, 1, 1, 0 },
471 { "PWM Phase5", 30, 1, 1, 1, 0 },
472 { "CPU Fan", 32, 2, 60, 1, 0 },
473 { "SYS Fan", 34, 2, 60, 1, 0 },
474 { "AUX1 Fan", 33, 2, 60, 1, 0 },
475 { "AUX2 Fan", 35, 2, 60, 1, 0 },
476 { "AUX3 Fan", 36, 2, 60, 1, 0 },
477 { NULL, 0, 0, 0, 0, 0 } }
478 },
479 { 0x0019, "unknown", {
480 { "CPU Core", 7, 0, 10, 1, 0 },
481 { "DDR2", 13, 0, 20, 1, 0 },
482 { "DDR2 VTT", 14, 0, 10, 1, 0 },
483 { "CPU VTT", 3, 0, 20, 1, 0 },
484 { "NB 1.2V ", 4, 0, 10, 1, 0 },
485 { "SB 1.5V", 6, 0, 10, 1, 0 },
486 { "HyperTransport", 5, 0, 10, 1, 0 },
487 { "ATX +12V (24-Pin)", 12, 0, 60, 1, 0 },
488 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
489 { "ATX +5V", 9, 0, 30, 1, 0 },
490 { "ATX +3.3V", 10, 0, 20, 1, 0 },
491 { "ATX 5VSB", 11, 0, 30, 1, 0 },
492 { "CPU", 24, 1, 1, 1, 0 },
493 { "System ", 25, 1, 1, 1, 0 },
494 { "PWM Phase1", 26, 1, 1, 1, 0 },
495 { "PWM Phase2", 27, 1, 1, 1, 0 },
496 { "PWM Phase3", 28, 1, 1, 1, 0 },
497 { "PWM Phase4", 29, 1, 1, 1, 0 },
498 { "PWM Phase5", 30, 1, 1, 1, 0 },
499 { "CPU FAN", 32, 2, 60, 1, 0 },
500 { "SYS FAN", 34, 2, 60, 1, 0 },
501 { "AUX1 FAN", 33, 2, 60, 1, 0 },
502 { "AUX2 FAN", 35, 2, 60, 1, 0 },
503 { "AUX3 FAN", 36, 2, 60, 1, 0 },
504 { NULL, 0, 0, 0, 0, 0 } }
505 },
506 { 0x001A, "unknown", {
507 { "CPU Core", 0, 0, 10, 1, 0 },
508 { "DDR2", 1, 0, 20, 1, 0 },
509 { "DDR2 VTT", 2, 0, 10, 1, 0 },
510 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
511 { "MCH 1.25V", 4, 0, 10, 1, 0 },
512 { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
513 { "ICH 1.05V", 6, 0, 10, 1, 0 },
514 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
515 { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 },
516 { "ATX +5V", 9, 0, 30, 1, 0 },
517 { "+3.3V", 10, 0, 20, 1, 0 },
518 { "5VSB", 11, 0, 30, 1, 0 },
519 { "CPU", 24, 1, 1, 1, 0 },
520 { "System ", 25, 1, 1, 1, 0 },
521 { "PWM ", 26, 1, 1, 1, 0 },
522 { "PWM Phase2", 27, 1, 1, 1, 0 },
523 { "PWM Phase3", 28, 1, 1, 1, 0 },
524 { "PWM Phase4", 29, 1, 1, 1, 0 },
525 { "PWM Phase5", 30, 1, 1, 1, 0 },
526 { "CPU Fan", 32, 2, 60, 1, 0 },
527 { "SYS Fan", 34, 2, 60, 1, 0 },
528 { "AUX1 Fan", 33, 2, 60, 1, 0 },
529 { "AUX2 Fan", 35, 2, 60, 1, 0 },
530 { "AUX3 Fan", 36, 2, 60, 1, 0 },
531 { NULL, 0, 0, 0, 0, 0 } }
532 },
533 { 0x0000, NULL, { { NULL, 0, 0, 0, 0, 0 } } }
534 };
535
536
537 /* Insmod parameters */
538 static int force;
539 module_param(force, bool, 0);
540 MODULE_PARM_DESC(force, "Set to one to force detection.");
541 /* Default verbose is 1, since this driver is still in the testing phase */
542 static int verbose = 1;
543 module_param(verbose, bool, 0644);
544 MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
545
546
547 /* wait while the uguru is busy (usually after a write) */
548 static int abituguru3_wait_while_busy(struct abituguru3_data *data)
549 {
550 u8 x;
551 int timeout = ABIT_UGURU3_WAIT_TIMEOUT;
552
553 while ((x = inb_p(data->addr + ABIT_UGURU3_DATA)) &
554 ABIT_UGURU3_STATUS_BUSY) {
555 timeout--;
556 if (timeout == 0)
557 return x;
558 /* sleep a bit before our last try, to give the uGuru3 one
559 last chance to respond. */
560 if (timeout == 1)
561 msleep(1);
562 }
563 return ABIT_UGURU3_SUCCESS;
564 }
565
566 /* wait till uguru is ready to be read */
567 static int abituguru3_wait_for_read(struct abituguru3_data *data)
568 {
569 u8 x;
570 int timeout = ABIT_UGURU3_WAIT_TIMEOUT;
571
572 while (!((x = inb_p(data->addr + ABIT_UGURU3_DATA)) &
573 ABIT_UGURU3_STATUS_READY_FOR_READ)) {
574 timeout--;
575 if (timeout == 0)
576 return x;
577 /* sleep a bit before our last try, to give the uGuru3 one
578 last chance to respond. */
579 if (timeout == 1)
580 msleep(1);
581 }
582 return ABIT_UGURU3_SUCCESS;
583 }
584
585 /* This synchronizes us with the uGuru3's protocol state machine, this
586 must be done before each command. */
587 static int abituguru3_synchronize(struct abituguru3_data *data)
588 {
589 int x, timeout = ABIT_UGURU3_SYNCHRONIZE_TIMEOUT;
590
591 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
592 ABIT_UGURU3_DEBUG("synchronize timeout during initial busy "
593 "wait, status: 0x%02x\n", x);
594 return -EIO;
595 }
596
597 outb(0x20, data->addr + ABIT_UGURU3_DATA);
598 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
599 ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x20, "
600 "status: 0x%02x\n", x);
601 return -EIO;
602 }
603
604 outb(0x10, data->addr + ABIT_UGURU3_CMD);
605 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
606 ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x10, "
607 "status: 0x%02x\n", x);
608 return -EIO;
609 }
610
611 outb(0x00, data->addr + ABIT_UGURU3_CMD);
612 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
613 ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x00, "
614 "status: 0x%02x\n", x);
615 return -EIO;
616 }
617
618 if ((x = abituguru3_wait_for_read(data)) != ABIT_UGURU3_SUCCESS) {
619 ABIT_UGURU3_DEBUG("synchronize timeout waiting for read, "
620 "status: 0x%02x\n", x);
621 return -EIO;
622 }
623
624 while ((x = inb(data->addr + ABIT_UGURU3_CMD)) != 0xAC) {
625 timeout--;
626 if (timeout == 0) {
627 ABIT_UGURU3_DEBUG("synchronize timeout cmd does not "
628 "hold 0xAC after synchronize, cmd: 0x%02x\n",
629 x);
630 return -EIO;
631 }
632 msleep(1);
633 }
634 return 0;
635 }
636
637 /* Read count bytes from sensor sensor_addr in bank bank_addr and store the
638 result in buf */
639 static int abituguru3_read(struct abituguru3_data *data, u8 bank, u8 offset,
640 u8 count, u8 *buf)
641 {
642 int i, x;
643
644 if ((x = abituguru3_synchronize(data)))
645 return x;
646
647 outb(0x1A, data->addr + ABIT_UGURU3_DATA);
648 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
649 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
650 "sending 0x1A, status: 0x%02x\n", (unsigned int)bank,
651 (unsigned int)offset, x);
652 return -EIO;
653 }
654
655 outb(bank, data->addr + ABIT_UGURU3_CMD);
656 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
657 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
658 "sending the bank, status: 0x%02x\n",
659 (unsigned int)bank, (unsigned int)offset, x);
660 return -EIO;
661 }
662
663 outb(offset, data->addr + ABIT_UGURU3_CMD);
664 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
665 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
666 "sending the offset, status: 0x%02x\n",
667 (unsigned int)bank, (unsigned int)offset, x);
668 return -EIO;
669 }
670
671 outb(count, data->addr + ABIT_UGURU3_CMD);
672 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
673 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
674 "sending the count, status: 0x%02x\n",
675 (unsigned int)bank, (unsigned int)offset, x);
676 return -EIO;
677 }
678
679 for (i = 0; i < count; i++) {
680 if ((x = abituguru3_wait_for_read(data)) !=
681 ABIT_UGURU3_SUCCESS) {
682 ABIT_UGURU3_DEBUG("timeout reading byte %d from "
683 "0x%02x:0x%02x, status: 0x%02x\n", i,
684 (unsigned int)bank, (unsigned int)offset, x);
685 break;
686 }
687 buf[i] = inb(data->addr + ABIT_UGURU3_CMD);
688 }
689 return i;
690 }
691
692 /* Sensor settings are stored 1 byte per offset with the bytes
693 placed add consecutive offsets. */
694 static int abituguru3_read_increment_offset(struct abituguru3_data *data,
695 u8 bank, u8 offset, u8 count,
696 u8 *buf, int offset_count)
697 {
698 int i, x;
699
700 for (i = 0; i < offset_count; i++)
701 if ((x = abituguru3_read(data, bank, offset + i, count,
702 buf + i * count)) != count)
703 return i * count + (i && (x < 0)) ? 0 : x;
704
705 return i * count;
706 }
707
708 /* Following are the sysfs callback functions. These functions expect:
709 sensor_device_attribute_2->index: index into the data->sensors array
710 sensor_device_attribute_2->nr: register offset, bitmask or NA. */
711 static struct abituguru3_data *abituguru3_update_device(struct device *dev);
712
713 static ssize_t show_value(struct device *dev,
714 struct device_attribute *devattr, char *buf)
715 {
716 int value;
717 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
718 struct abituguru3_data *data = abituguru3_update_device(dev);
719 const struct abituguru3_sensor_info *sensor;
720
721 if (!data)
722 return -EIO;
723
724 sensor = &data->sensors[attr->index];
725
726 /* are we reading a setting, or is this a normal read? */
727 if (attr->nr)
728 value = data->settings[sensor->port][attr->nr];
729 else
730 value = data->value[sensor->port];
731
732 /* convert the value */
733 value = (value * sensor->multiplier) / sensor->divisor +
734 sensor->offset;
735
736 /* alternatively we could update the sensors settings struct for this,
737 but then its contents would differ from the windows sw ini files */
738 if (sensor->type == ABIT_UGURU3_TEMP_SENSOR)
739 value *= 1000;
740
741 return sprintf(buf, "%d\n", value);
742 }
743
744 static ssize_t show_alarm(struct device *dev,
745 struct device_attribute *devattr, char *buf)
746 {
747 int port;
748 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
749 struct abituguru3_data *data = abituguru3_update_device(dev);
750
751 if (!data)
752 return -EIO;
753
754 port = data->sensors[attr->index].port;
755
756 /* See if the alarm bit for this sensor is set and if a bitmask is
757 given in attr->nr also check if the alarm matches the type of alarm
758 we're looking for (for volt it can be either low or high). The type
759 is stored in a few readonly bits in the settings of the sensor. */
760 if ((data->alarms[port / 8] & (0x01 << (port % 8))) &&
761 (!attr->nr || (data->settings[port][0] & attr->nr)))
762 return sprintf(buf, "1\n");
763 else
764 return sprintf(buf, "0\n");
765 }
766
767 static ssize_t show_mask(struct device *dev,
768 struct device_attribute *devattr, char *buf)
769 {
770 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
771 struct abituguru3_data *data = dev_get_drvdata(dev);
772
773 if (data->settings[data->sensors[attr->index].port][0] & attr->nr)
774 return sprintf(buf, "1\n");
775 else
776 return sprintf(buf, "0\n");
777 }
778
779 static ssize_t show_label(struct device *dev,
780 struct device_attribute *devattr, char *buf)
781 {
782 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
783 struct abituguru3_data *data = dev_get_drvdata(dev);
784
785 return sprintf(buf, "%s\n", data->sensors[attr->index].name);
786 }
787
788 static ssize_t show_name(struct device *dev,
789 struct device_attribute *devattr, char *buf)
790 {
791 return sprintf(buf, "%s\n", ABIT_UGURU3_NAME);
792 }
793
794 /* Sysfs attr templates, the real entries are generated automatically. */
795 static const
796 struct sensor_device_attribute_2 abituguru3_sysfs_templ[3][10] = { {
797 SENSOR_ATTR_2(in%d_input, 0444, show_value, NULL, 0, 0),
798 SENSOR_ATTR_2(in%d_min, 0444, show_value, NULL, 1, 0),
799 SENSOR_ATTR_2(in%d_max, 0444, show_value, NULL, 2, 0),
800 SENSOR_ATTR_2(in%d_min_alarm, 0444, show_alarm, NULL,
801 ABIT_UGURU3_VOLT_LOW_ALARM_FLAG, 0),
802 SENSOR_ATTR_2(in%d_max_alarm, 0444, show_alarm, NULL,
803 ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG, 0),
804 SENSOR_ATTR_2(in%d_beep, 0444, show_mask, NULL,
805 ABIT_UGURU3_BEEP_ENABLE, 0),
806 SENSOR_ATTR_2(in%d_shutdown, 0444, show_mask, NULL,
807 ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
808 SENSOR_ATTR_2(in%d_min_alarm_enable, 0444, show_mask, NULL,
809 ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE, 0),
810 SENSOR_ATTR_2(in%d_max_alarm_enable, 0444, show_mask, NULL,
811 ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE, 0),
812 SENSOR_ATTR_2(in%d_label, 0444, show_label, NULL, 0, 0)
813 }, {
814 SENSOR_ATTR_2(temp%d_input, 0444, show_value, NULL, 0, 0),
815 SENSOR_ATTR_2(temp%d_max, 0444, show_value, NULL, 1, 0),
816 SENSOR_ATTR_2(temp%d_crit, 0444, show_value, NULL, 2, 0),
817 SENSOR_ATTR_2(temp%d_alarm, 0444, show_alarm, NULL, 0, 0),
818 SENSOR_ATTR_2(temp%d_beep, 0444, show_mask, NULL,
819 ABIT_UGURU3_BEEP_ENABLE, 0),
820 SENSOR_ATTR_2(temp%d_shutdown, 0444, show_mask, NULL,
821 ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
822 SENSOR_ATTR_2(temp%d_alarm_enable, 0444, show_mask, NULL,
823 ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE, 0),
824 SENSOR_ATTR_2(temp%d_label, 0444, show_label, NULL, 0, 0)
825 }, {
826 SENSOR_ATTR_2(fan%d_input, 0444, show_value, NULL, 0, 0),
827 SENSOR_ATTR_2(fan%d_min, 0444, show_value, NULL, 1, 0),
828 SENSOR_ATTR_2(fan%d_alarm, 0444, show_alarm, NULL, 0, 0),
829 SENSOR_ATTR_2(fan%d_beep, 0444, show_mask, NULL,
830 ABIT_UGURU3_BEEP_ENABLE, 0),
831 SENSOR_ATTR_2(fan%d_shutdown, 0444, show_mask, NULL,
832 ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
833 SENSOR_ATTR_2(fan%d_alarm_enable, 0444, show_mask, NULL,
834 ABIT_UGURU3_FAN_LOW_ALARM_ENABLE, 0),
835 SENSOR_ATTR_2(fan%d_label, 0444, show_label, NULL, 0, 0)
836 } };
837
838 static struct sensor_device_attribute_2 abituguru3_sysfs_attr[] = {
839 SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0),
840 };
841
842 static int __devinit abituguru3_probe(struct platform_device *pdev)
843 {
844 const int no_sysfs_attr[3] = { 10, 8, 7 };
845 int sensor_index[3] = { 0, 1, 1 };
846 struct abituguru3_data *data;
847 int i, j, type, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV;
848 char *sysfs_filename;
849 u8 buf[2];
850 u16 id;
851
852 if (!(data = kzalloc(sizeof(struct abituguru3_data), GFP_KERNEL)))
853 return -ENOMEM;
854
855 data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
856 mutex_init(&data->update_lock);
857 platform_set_drvdata(pdev, data);
858
859 /* Read the motherboard ID */
860 if ((i = abituguru3_read(data, ABIT_UGURU3_MISC_BANK,
861 ABIT_UGURU3_BOARD_ID, 2, buf)) != 2) {
862 goto abituguru3_probe_error;
863 }
864
865 /* Completely read the uGuru to see if one really is there */
866 if (!abituguru3_update_device(&pdev->dev))
867 goto abituguru3_probe_error;
868
869 /* lookup the ID in our motherboard table */
870 id = ((u16)buf[0] << 8) | (u16)buf[1];
871 for (i = 0; abituguru3_motherboards[i].id; i++)
872 if (abituguru3_motherboards[i].id == id)
873 break;
874 if (!abituguru3_motherboards[i].id) {
875 printk(KERN_ERR ABIT_UGURU3_NAME ": error unknown motherboard "
876 "ID: %04X. Please report this to the abituguru3 "
877 "maintainer (see MAINTAINERS)\n", (unsigned int)id);
878 goto abituguru3_probe_error;
879 }
880 data->sensors = abituguru3_motherboards[i].sensors;
881 printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
882 "ID: %04X (%s)\n", (unsigned int)id,
883 abituguru3_motherboards[i].name);
884
885 /* Fill the sysfs attr array */
886 sysfs_attr_i = 0;
887 sysfs_filename = data->sysfs_names;
888 sysfs_names_free = ABIT_UGURU3_SYSFS_NAMES_LENGTH;
889 for (i = 0; data->sensors[i].name; i++) {
890 /* Fail safe check, this should never happen! */
891 if (i >= ABIT_UGURU3_MAX_NO_SENSORS) {
892 printk(KERN_ERR ABIT_UGURU3_NAME
893 ": Fatal error motherboard has more sensors "
894 "then ABIT_UGURU3_MAX_NO_SENSORS. This should "
895 "never happen please report to the abituguru3 "
896 "maintainer (see MAINTAINERS)\n");
897 res = -ENAMETOOLONG;
898 goto abituguru3_probe_error;
899 }
900 type = data->sensors[i].type;
901 for (j = 0; j < no_sysfs_attr[type]; j++) {
902 used = snprintf(sysfs_filename, sysfs_names_free,
903 abituguru3_sysfs_templ[type][j].dev_attr.attr.
904 name, sensor_index[type]) + 1;
905 data->sysfs_attr[sysfs_attr_i] =
906 abituguru3_sysfs_templ[type][j];
907 data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name =
908 sysfs_filename;
909 data->sysfs_attr[sysfs_attr_i].index = i;
910 sysfs_filename += used;
911 sysfs_names_free -= used;
912 sysfs_attr_i++;
913 }
914 sensor_index[type]++;
915 }
916 /* Fail safe check, this should never happen! */
917 if (sysfs_names_free < 0) {
918 printk(KERN_ERR ABIT_UGURU3_NAME
919 ": Fatal error ran out of space for sysfs attr names. "
920 "This should never happen please report to the "
921 "abituguru3 maintainer (see MAINTAINERS)\n");
922 res = -ENAMETOOLONG;
923 goto abituguru3_probe_error;
924 }
925
926 /* Register sysfs hooks */
927 for (i = 0; i < sysfs_attr_i; i++)
928 if (device_create_file(&pdev->dev,
929 &data->sysfs_attr[i].dev_attr))
930 goto abituguru3_probe_error;
931 for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
932 if (device_create_file(&pdev->dev,
933 &abituguru3_sysfs_attr[i].dev_attr))
934 goto abituguru3_probe_error;
935
936 data->hwmon_dev = hwmon_device_register(&pdev->dev);
937 if (IS_ERR(data->hwmon_dev)) {
938 res = PTR_ERR(data->hwmon_dev);
939 goto abituguru3_probe_error;
940 }
941
942 return 0; /* success */
943
944 abituguru3_probe_error:
945 for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
946 device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
947 for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
948 device_remove_file(&pdev->dev,
949 &abituguru3_sysfs_attr[i].dev_attr);
950 kfree(data);
951 return res;
952 }
953
954 static int __devexit abituguru3_remove(struct platform_device *pdev)
955 {
956 int i;
957 struct abituguru3_data *data = platform_get_drvdata(pdev);
958
959 platform_set_drvdata(pdev, NULL);
960 hwmon_device_unregister(data->hwmon_dev);
961 for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
962 device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
963 for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
964 device_remove_file(&pdev->dev,
965 &abituguru3_sysfs_attr[i].dev_attr);
966 kfree(data);
967
968 return 0;
969 }
970
971 static struct abituguru3_data *abituguru3_update_device(struct device *dev)
972 {
973 int i;
974 struct abituguru3_data *data = dev_get_drvdata(dev);
975
976 mutex_lock(&data->update_lock);
977 if (!data->valid || time_after(jiffies, data->last_updated + HZ)) {
978 /* Clear data->valid while updating */
979 data->valid = 0;
980 /* Read alarms */
981 if (abituguru3_read_increment_offset(data,
982 ABIT_UGURU3_SETTINGS_BANK,
983 ABIT_UGURU3_ALARMS_START,
984 1, data->alarms, 48/8) != (48/8))
985 goto LEAVE_UPDATE;
986 /* Read in and temp sensors (3 byte settings / sensor) */
987 for (i = 0; i < 32; i++) {
988 if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK,
989 ABIT_UGURU3_VALUES_START + i,
990 1, &data->value[i]) != 1)
991 goto LEAVE_UPDATE;
992 if (abituguru3_read_increment_offset(data,
993 ABIT_UGURU3_SETTINGS_BANK,
994 ABIT_UGURU3_SETTINGS_START + i * 3,
995 1,
996 data->settings[i], 3) != 3)
997 goto LEAVE_UPDATE;
998 }
999 /* Read temp sensors (2 byte settings / sensor) */
1000 for (i = 0; i < 16; i++) {
1001 if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK,
1002 ABIT_UGURU3_VALUES_START + 32 + i,
1003 1, &data->value[32 + i]) != 1)
1004 goto LEAVE_UPDATE;
1005 if (abituguru3_read_increment_offset(data,
1006 ABIT_UGURU3_SETTINGS_BANK,
1007 ABIT_UGURU3_SETTINGS_START + 32 * 3 +
1008 i * 2, 1,
1009 data->settings[32 + i], 2) != 2)
1010 goto LEAVE_UPDATE;
1011 }
1012 data->last_updated = jiffies;
1013 data->valid = 1;
1014 }
1015 LEAVE_UPDATE:
1016 mutex_unlock(&data->update_lock);
1017 if (data->valid)
1018 return data;
1019 else
1020 return NULL;
1021 }
1022
1023 #ifdef CONFIG_PM
1024 static int abituguru3_suspend(struct platform_device *pdev, pm_message_t state)
1025 {
1026 struct abituguru3_data *data = platform_get_drvdata(pdev);
1027 /* make sure all communications with the uguru3 are done and no new
1028 ones are started */
1029 mutex_lock(&data->update_lock);
1030 return 0;
1031 }
1032
1033 static int abituguru3_resume(struct platform_device *pdev)
1034 {
1035 struct abituguru3_data *data = platform_get_drvdata(pdev);
1036 mutex_unlock(&data->update_lock);
1037 return 0;
1038 }
1039 #else
1040 #define abituguru3_suspend NULL
1041 #define abituguru3_resume NULL
1042 #endif /* CONFIG_PM */
1043
1044 static struct platform_driver abituguru3_driver = {
1045 .driver = {
1046 .owner = THIS_MODULE,
1047 .name = ABIT_UGURU3_NAME,
1048 },
1049 .probe = abituguru3_probe,
1050 .remove = __devexit_p(abituguru3_remove),
1051 .suspend = abituguru3_suspend,
1052 .resume = abituguru3_resume
1053 };
1054
1055 static int __init abituguru3_detect(void)
1056 {
1057 /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
1058 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
1059 at CMD instead, why is unknown. So we test for 0x05 too. */
1060 u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
1061 u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
1062 if (((data_val == 0x00) || (data_val == 0x08)) &&
1063 ((cmd_val == 0xAC) || (cmd_val == 0x05)))
1064 return ABIT_UGURU3_BASE;
1065
1066 ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
1067 "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
1068
1069 if (force) {
1070 printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
1071 "present because of \"force\" parameter\n");
1072 return ABIT_UGURU3_BASE;
1073 }
1074
1075 /* No uGuru3 found */
1076 return -ENODEV;
1077 }
1078
1079 static struct platform_device *abituguru3_pdev;
1080
1081 static int __init abituguru3_init(void)
1082 {
1083 int address, err;
1084 struct resource res = { .flags = IORESOURCE_IO };
1085
1086 address = abituguru3_detect();
1087 if (address < 0)
1088 return address;
1089
1090 err = platform_driver_register(&abituguru3_driver);
1091 if (err)
1092 goto exit;
1093
1094 abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
1095 if (!abituguru3_pdev) {
1096 printk(KERN_ERR ABIT_UGURU3_NAME
1097 ": Device allocation failed\n");
1098 err = -ENOMEM;
1099 goto exit_driver_unregister;
1100 }
1101
1102 res.start = address;
1103 res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
1104 res.name = ABIT_UGURU3_NAME;
1105
1106 err = platform_device_add_resources(abituguru3_pdev, &res, 1);
1107 if (err) {
1108 printk(KERN_ERR ABIT_UGURU3_NAME
1109 ": Device resource addition failed (%d)\n", err);
1110 goto exit_device_put;
1111 }
1112
1113 err = platform_device_add(abituguru3_pdev);
1114 if (err) {
1115 printk(KERN_ERR ABIT_UGURU3_NAME
1116 ": Device addition failed (%d)\n", err);
1117 goto exit_device_put;
1118 }
1119
1120 return 0;
1121
1122 exit_device_put:
1123 platform_device_put(abituguru3_pdev);
1124 exit_driver_unregister:
1125 platform_driver_unregister(&abituguru3_driver);
1126 exit:
1127 return err;
1128 }
1129
1130 static void __exit abituguru3_exit(void)
1131 {
1132 platform_device_unregister(abituguru3_pdev);
1133 platform_driver_unregister(&abituguru3_driver);
1134 }
1135
1136 MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
1137 MODULE_DESCRIPTION("Abit uGuru3 Sensor device");
1138 MODULE_LICENSE("GPL");
1139
1140 module_init(abituguru3_init);
1141 module_exit(abituguru3_exit);
Mirror for ia64_pv_ops.git