pcmcia: CompactFlash driver for PA Semi Electra boards
[pv_ops_mirror.git] / drivers / ide / legacy / macide.c
blobb557c45a5a9dc614e7aa556e07554f5b3623457a
1 /*
2 * linux/drivers/ide/legacy/macide.c -- Macintosh IDE Driver
4 * Copyright (C) 1998 by Michael Schmitz
6 * This driver was written based on information obtained from the MacOS IDE
7 * driver binary by Mikael Forselius
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file COPYING in the main directory of this archive for
11 * more details.
14 #include <linux/types.h>
15 #include <linux/mm.h>
16 #include <linux/interrupt.h>
17 #include <linux/blkdev.h>
18 #include <linux/hdreg.h>
19 #include <linux/delay.h>
20 #include <linux/ide.h>
22 #include <asm/machw.h>
23 #include <asm/macintosh.h>
24 #include <asm/macints.h>
25 #include <asm/mac_baboon.h>
27 #define IDE_BASE 0x50F1A000 /* Base address of IDE controller */
30 * Generic IDE registers as offsets from the base
31 * These match MkLinux so they should be correct.
34 #define IDE_DATA 0x00
35 #define IDE_ERROR 0x04 /* see err-bits */
36 #define IDE_NSECTOR 0x08 /* nr of sectors to read/write */
37 #define IDE_SECTOR 0x0c /* starting sector */
38 #define IDE_LCYL 0x10 /* starting cylinder */
39 #define IDE_HCYL 0x14 /* high byte of starting cyl */
40 #define IDE_SELECT 0x18 /* 101dhhhh , d=drive, hhhh=head */
41 #define IDE_STATUS 0x1c /* see status-bits */
42 #define IDE_CONTROL 0x38 /* control/altstatus */
45 * Mac-specific registers
49 * this register is odd; it doesn't seem to do much and it's
50 * not word-aligned like virtually every other hardware register
51 * on the Mac...
54 #define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra:
56 * Bit 0+1: some interrupt flags
57 * Bit 2+3: some interrupt enable
58 * Bit 4: ??
59 * Bit 5: IDE interrupt flag (any hwif)
60 * Bit 6: maybe IDE interrupt enable (any hwif) ??
61 * Bit 7: Any interrupt condition
64 volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
66 static int macide_offsets[IDE_NR_PORTS] = {
67 IDE_DATA, IDE_ERROR, IDE_NSECTOR, IDE_SECTOR, IDE_LCYL,
68 IDE_HCYL, IDE_SELECT, IDE_STATUS, IDE_CONTROL
71 int macide_ack_intr(ide_hwif_t* hwif)
73 if (*ide_ifr & 0x20) {
74 *ide_ifr &= ~0x20;
75 return 1;
77 return 0;
81 * Probe for a Macintosh IDE interface
84 void macide_init(void)
86 hw_regs_t hw;
87 ide_hwif_t *hwif;
88 int index = -1;
90 switch (macintosh_config->ide_type) {
91 case MAC_IDE_QUADRA:
92 ide_setup_ports(&hw, IDE_BASE, macide_offsets,
93 0, 0, macide_ack_intr,
94 // quadra_ide_iops,
95 IRQ_NUBUS_F);
96 index = ide_register_hw(&hw, 1, &hwif);
97 break;
98 case MAC_IDE_PB:
99 ide_setup_ports(&hw, IDE_BASE, macide_offsets,
100 0, 0, macide_ack_intr,
101 // macide_pb_iops,
102 IRQ_NUBUS_C);
103 index = ide_register_hw(&hw, 1, &hwif);
104 break;
105 case MAC_IDE_BABOON:
106 ide_setup_ports(&hw, BABOON_BASE, macide_offsets,
107 0, 0, NULL,
108 // macide_baboon_iops,
109 IRQ_BABOON_1);
110 index = ide_register_hw(&hw, 1, &hwif);
111 if (index == -1) break;
112 if (macintosh_config->ident == MAC_MODEL_PB190) {
114 /* Fix breakage in ide-disk.c: drive capacity */
115 /* is not initialized for drives without a */
116 /* hardware ID, and we can't get that without */
117 /* probing the drive which freezes a 190. */
119 ide_drive_t *drive = &ide_hwifs[index].drives[0];
120 drive->capacity64 = drive->cyl*drive->head*drive->sect;
123 break;
125 default:
126 return;
129 if (index != -1) {
130 hwif->mmio = 1;
131 if (macintosh_config->ide_type == MAC_IDE_QUADRA)
132 printk(KERN_INFO "ide%d: Macintosh Quadra IDE interface\n", index);
133 else if (macintosh_config->ide_type == MAC_IDE_PB)
134 printk(KERN_INFO "ide%d: Macintosh Powerbook IDE interface\n", index);
135 else if (macintosh_config->ide_type == MAC_IDE_BABOON)
136 printk(KERN_INFO "ide%d: Macintosh Powerbook Baboon IDE interface\n", index);
137 else
138 printk(KERN_INFO "ide%d: Unknown Macintosh IDE interface\n", index);