pcmcia: CompactFlash driver for PA Semi Electra boards

[pv_ops_mirror.git] / drivers / ide / pci / alim15x3.c

/*
 * linux/drivers/ide/pci/alim15x3.c             Version 0.26    Jul 14 2007
 *
 *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
 *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
 *  Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
 *
 *  Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
 *  May be copied or modified under the terms of the GNU General Public License
 *  Copyright (C) 2002 Alan Cox <alan@redhat.com>
 *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
 *  Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
 *  Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
 *
 *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
 *
 **********************************************************************
 *  9/7/99 --Parts from the above author are included and need to be
 *  converted into standard interface, once I finish the thought.
 *
 *  Recent changes
 *      Don't use LBA48 mode on ALi <= 0xC4
 *      Don't poke 0x79 with a non ALi northbridge
 *      Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang)
 *      Allow UDMA6 on revisions > 0xC4
 *
 *  Documentation
 *      Chipset documentation available under NDA only
 *
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/dmi.h>

#include <asm/io.h>

#define DISPLAY_ALI_TIMINGS

/*
 *      ALi devices are not plug in. Otherwise these static values would
 *      need to go. They ought to go away anyway
 */
 
static u8 m5229_revision;
static u8 chip_is_1543c_e;
static struct pci_dev *isa_dev;

#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>

static u8 ali_proc = 0;

static struct pci_dev *bmide_dev;

static char *fifo[4] = {
        "FIFO Off",
        "FIFO On ",
        "DMA mode",
        "PIO mode" };

static char *udmaT[8] = {
        "1.5T",
        "  2T",
        "2.5T",
        "  3T",
        "3.5T",
        "  4T",
        "  6T",
        "  8T"
};

static char *channel_status[8] = {
        "OK            ",
        "busy          ",
        "DRQ           ",
        "DRQ busy      ",
        "error         ",
        "error busy    ",
        "error DRQ     ",
        "error DRQ busy"
};

/**
 *      ali_get_info            -       generate proc file for ALi IDE
 *      @buffer: buffer to fill
 *      @addr: address of user start in buffer
 *      @offset: offset into 'file'
 *      @count: buffer count
 *
 *      Walks the Ali devices and outputs summary data on the tuning and
 *      anything else that will help with debugging
 */
 
static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
{
        unsigned long bibma;
        u8 reg53h, reg5xh, reg5yh, reg5xh1, reg5yh1, c0, c1, rev, tmp;
        char *q, *p = buffer;

        /* fetch rev. */
        pci_read_config_byte(bmide_dev, 0x08, &rev);
        if (rev >= 0xc1)        /* M1543C or newer */
                udmaT[7] = " ???";
        else
                fifo[3]  = "   ???  ";

        /* first fetch bibma: */
        
        bibma = pci_resource_start(bmide_dev, 4);

        /*
         * at that point bibma+0x2 et bibma+0xa are byte
         * registers to investigate:
         */
        c0 = inb(bibma + 0x02);
        c1 = inb(bibma + 0x0a);

        p += sprintf(p,
                "\n                                Ali M15x3 Chipset.\n");
        p += sprintf(p,
                "                                ------------------\n");
        pci_read_config_byte(bmide_dev, 0x78, &reg53h);
        p += sprintf(p, "PCI Clock: %d.\n", reg53h);

        pci_read_config_byte(bmide_dev, 0x53, &reg53h);
        p += sprintf(p,
                "CD_ROM FIFO:%s, CD_ROM DMA:%s\n",
                (reg53h & 0x02) ? "Yes" : "No ",
                (reg53h & 0x01) ? "Yes" : "No " );
        pci_read_config_byte(bmide_dev, 0x74, &reg53h);
        p += sprintf(p,
                "FIFO Status: contains %d Words, runs%s%s\n\n",
                (reg53h & 0x3f),
                (reg53h & 0x40) ? " OVERWR" : "",
                (reg53h & 0x80) ? " OVERRD." : "." );

        p += sprintf(p,
                "-------------------primary channel"
                "-------------------secondary channel"
                "---------\n\n");

        pci_read_config_byte(bmide_dev, 0x09, &reg53h);
        p += sprintf(p,
                "channel status:       %s"
                "                               %s\n",
                (reg53h & 0x20) ? "On " : "Off",
                (reg53h & 0x10) ? "On " : "Off" );

        p += sprintf(p,
                "both channels togth:  %s"
                "                               %s\n",
                (c0&0x80) ? "No " : "Yes",
                (c1&0x80) ? "No " : "Yes" );

        pci_read_config_byte(bmide_dev, 0x76, &reg53h);
        p += sprintf(p,
                "Channel state:        %s                    %s\n",
                channel_status[reg53h & 0x07],
                channel_status[(reg53h & 0x70) >> 4] );

        pci_read_config_byte(bmide_dev, 0x58, &reg5xh);
        pci_read_config_byte(bmide_dev, 0x5c, &reg5yh);
        p += sprintf(p,
                "Add. Setup Timing:    %dT"
                "                                %dT\n",
                (reg5xh & 0x07) ? (reg5xh & 0x07) : 8,
                (reg5yh & 0x07) ? (reg5yh & 0x07) : 8 );

        pci_read_config_byte(bmide_dev, 0x59, &reg5xh);
        pci_read_config_byte(bmide_dev, 0x5d, &reg5yh);
        p += sprintf(p,
                "Command Act. Count:   %dT"
                "                                %dT\n"
                "Command Rec. Count:   %dT"
                "                               %dT\n\n",
                (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8,
                (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, 
                (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16,
                (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16 );

        p += sprintf(p,
                "----------------drive0-----------drive1"
                "------------drive0-----------drive1------\n\n");
        p += sprintf(p,
                "DMA enabled:      %s              %s"
                "               %s              %s\n",
                (c0&0x20) ? "Yes" : "No ",
                (c0&0x40) ? "Yes" : "No ",
                (c1&0x20) ? "Yes" : "No ",
                (c1&0x40) ? "Yes" : "No " );

        pci_read_config_byte(bmide_dev, 0x54, &reg5xh);
        pci_read_config_byte(bmide_dev, 0x55, &reg5yh);
        q = "FIFO threshold:   %2d Words         %2d Words"
                "          %2d Words         %2d Words\n";
        if (rev < 0xc1) {
                if ((rev == 0x20) &&
                    (pci_read_config_byte(bmide_dev, 0x4f, &tmp), (tmp &= 0x20))) {
                        p += sprintf(p, q, 8, 8, 8, 8);
                } else {
                        p += sprintf(p, q,
                                (reg5xh & 0x03) + 12,
                                ((reg5xh & 0x30)>>4) + 12,
                                (reg5yh & 0x03) + 12,
                                ((reg5yh & 0x30)>>4) + 12 );
                }
        } else {
                int t1 = (tmp = (reg5xh & 0x03)) ? (tmp << 3) : 4;
                int t2 = (tmp = ((reg5xh & 0x30)>>4)) ? (tmp << 3) : 4;
                int t3 = (tmp = (reg5yh & 0x03)) ? (tmp << 3) : 4;
                int t4 = (tmp = ((reg5yh & 0x30)>>4)) ? (tmp << 3) : 4;
                p += sprintf(p, q, t1, t2, t3, t4);
        }

#if 0
        p += sprintf(p, 
                "FIFO threshold:   %2d Words         %2d Words"
                "          %2d Words         %2d Words\n",
                (reg5xh & 0x03) + 12,
                ((reg5xh & 0x30)>>4) + 12,
                (reg5yh & 0x03) + 12,
                ((reg5yh & 0x30)>>4) + 12 );
#endif

        p += sprintf(p,
                "FIFO mode:        %s         %s          %s         %s\n",
                fifo[((reg5xh & 0x0c) >> 2)],
                fifo[((reg5xh & 0xc0) >> 6)],
                fifo[((reg5yh & 0x0c) >> 2)],
                fifo[((reg5yh & 0xc0) >> 6)] );

        pci_read_config_byte(bmide_dev, 0x5a, &reg5xh);
        pci_read_config_byte(bmide_dev, 0x5b, &reg5xh1);
        pci_read_config_byte(bmide_dev, 0x5e, &reg5yh);
        pci_read_config_byte(bmide_dev, 0x5f, &reg5yh1);

        p += sprintf(p,/*
                "------------------drive0-----------drive1"
                "------------drive0-----------drive1------\n")*/
                "Dt RW act. Cnt    %2dT              %2dT"
                "               %2dT              %2dT\n"
                "Dt RW rec. Cnt    %2dT              %2dT"
                "               %2dT              %2dT\n\n",
                (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8,
                (reg5xh1 & 0x70) ? ((reg5xh1 & 0x70) >> 4) : 8,
                (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8,
                (reg5yh1 & 0x70) ? ((reg5yh1 & 0x70) >> 4) : 8,
                (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16,
                (reg5xh1 & 0x0f) ? (reg5xh1 & 0x0f) : 16,
                (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16,
                (reg5yh1 & 0x0f) ? (reg5yh1 & 0x0f) : 16 );

        p += sprintf(p,
                "-----------------------------------UDMA Timings"
                "--------------------------------\n\n");

        pci_read_config_byte(bmide_dev, 0x56, &reg5xh);
        pci_read_config_byte(bmide_dev, 0x57, &reg5yh);
        p += sprintf(p,
                "UDMA:             %s               %s"
                "                %s               %s\n"
                "UDMA timings:     %s             %s"
                "              %s             %s\n\n",
                (reg5xh & 0x08) ? "OK" : "No",
                (reg5xh & 0x80) ? "OK" : "No",
                (reg5yh & 0x08) ? "OK" : "No",
                (reg5yh & 0x80) ? "OK" : "No",
                udmaT[(reg5xh & 0x07)],
                udmaT[(reg5xh & 0x70) >> 4],
                udmaT[reg5yh & 0x07],
                udmaT[(reg5yh & 0x70) >> 4] );

        return p-buffer; /* => must be less than 4k! */
}
#endif  /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */

/**
 *      ali_set_pio_mode        -       set host controller for PIO mode
 *      @drive: drive
 *      @pio: PIO mode number
 *
 *      Program the controller for the given PIO mode.
 */

static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
        ide_hwif_t *hwif = HWIF(drive);
        struct pci_dev *dev = hwif->pci_dev;
        int s_time, a_time, c_time;
        u8 s_clc, a_clc, r_clc;
        unsigned long flags;
        int bus_speed = system_bus_clock();
        int port = hwif->channel ? 0x5c : 0x58;
        int portFIFO = hwif->channel ? 0x55 : 0x54;
        u8 cd_dma_fifo = 0;
        int unit = drive->select.b.unit & 1;

        s_time = ide_pio_timings[pio].setup_time;
        a_time = ide_pio_timings[pio].active_time;
        if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
                s_clc = 0;
        if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8)
                a_clc = 0;
        c_time = ide_pio_timings[pio].cycle_time;

#if 0
        if ((r_clc = ((c_time - s_time - a_time) * bus_speed + 999) / 1000) >= 16)
                r_clc = 0;
#endif

        if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
                r_clc = 1;
        } else {
                if (r_clc >= 16)
                        r_clc = 0;
        }
        local_irq_save(flags);
        
        /* 
         * PIO mode => ATA FIFO on, ATAPI FIFO off
         */
        pci_read_config_byte(dev, portFIFO, &cd_dma_fifo);
        if (drive->media==ide_disk) {
                if (unit) {
                        pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
                } else {
                        pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
                }
        } else {
                if (unit) {
                        pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
                } else {
                        pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
                }
        }
        
        pci_write_config_byte(dev, port, s_clc);
        pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc);
        local_irq_restore(flags);

        /*
         * setup   active  rec
         * { 70,   165,    365 },   PIO Mode 0
         * { 50,   125,    208 },   PIO Mode 1
         * { 30,   100,    110 },   PIO Mode 2
         * { 30,   80,     70  },   PIO Mode 3 with IORDY
         * { 25,   70,     25  },   PIO Mode 4 with IORDY  ns
         * { 20,   50,     30  }    PIO Mode 5 with IORDY (nonstandard)
         */
}

/**
 *      ali_udma_filter         -       compute UDMA mask
 *      @drive: IDE device
 *
 *      Return available UDMA modes.
 *
 *      The actual rules for the ALi are:
 *              No UDMA on revisions <= 0x20
 *              Disk only for revisions < 0xC2
 *              Not WDC drives for revisions < 0xC2
 *
 *      FIXME: WDC ifdef needs to die
 */

static u8 ali_udma_filter(ide_drive_t *drive)
{
        if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
                if (drive->media != ide_disk)
                        return 0;
#ifndef CONFIG_WDC_ALI15X3
                if (chip_is_1543c_e && strstr(drive->id->model, "WDC "))
                        return 0;
#endif
        }

        return drive->hwif->ultra_mask;
}

/**
 *      ali_set_dma_mode        -       set host controller for DMA mode
 *      @drive: drive
 *      @speed: DMA mode
 *
 *      Configure the hardware for the desired IDE transfer mode.
 */

static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
        ide_hwif_t *hwif        = HWIF(drive);
        struct pci_dev *dev     = hwif->pci_dev;
        u8 speed1               = speed;
        u8 unit                 = (drive->select.b.unit & 0x01);
        u8 tmpbyte              = 0x00;
        int m5229_udma          = (hwif->channel) ? 0x57 : 0x56;

        if (speed < XFER_PIO_0)
                return;

        if (speed == XFER_UDMA_6)
                speed1 = 0x47;

        if (speed < XFER_UDMA_0) {
                u8 ultra_enable = (unit) ? 0x7f : 0xf7;
                /*
                 * clear "ultra enable" bit
                 */
                pci_read_config_byte(dev, m5229_udma, &tmpbyte);
                tmpbyte &= ultra_enable;
                pci_write_config_byte(dev, m5229_udma, tmpbyte);

                /*
                 * FIXME: Oh, my... DMA timings are never set.
                 */
        } else {
                pci_read_config_byte(dev, m5229_udma, &tmpbyte);
                tmpbyte &= (0x0f << ((1-unit) << 2));
                /*
                 * enable ultra dma and set timing
                 */
                tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
                pci_write_config_byte(dev, m5229_udma, tmpbyte);
                if (speed >= XFER_UDMA_3) {
                        pci_read_config_byte(dev, 0x4b, &tmpbyte);
                        tmpbyte |= 1;
                        pci_write_config_byte(dev, 0x4b, tmpbyte);
                }
        }
}

/**
 *      ali15x3_dma_setup       -       begin a DMA phase
 *      @drive: target device
 *
 *      Returns 1 if the DMA cannot be performed, zero on success.
 */

static int ali15x3_dma_setup(ide_drive_t *drive)
{
        if (m5229_revision < 0xC2 && drive->media != ide_disk) {
                if (rq_data_dir(drive->hwif->hwgroup->rq))
                        return 1;       /* try PIO instead of DMA */
        }
        return ide_dma_setup(drive);
}

/**
 *      init_chipset_ali15x3    -       Initialise an ALi IDE controller
 *      @dev: PCI device
 *      @name: Name of the controller
 *
 *      This function initializes the ALI IDE controller and where 
 *      appropriate also sets up the 1533 southbridge.
 */
  
static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const char *name)
{
        unsigned long flags;
        u8 tmpbyte;
        struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));

        m5229_revision = dev->revision;

        isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);

#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
        if (!ali_proc) {
                ali_proc = 1;
                bmide_dev = dev;
                ide_pci_create_host_proc("ali", ali_get_info);
        }
#endif  /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */

        local_irq_save(flags);

        if (m5229_revision < 0xC2) {
                /*
                 * revision 0x20 (1543-E, 1543-F)
                 * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E)
                 * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7
                 */
                pci_read_config_byte(dev, 0x4b, &tmpbyte);
                /*
                 * clear bit 7
                 */
                pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
                goto out;
        }

        /*
         * 1543C-B?, 1535, 1535D, 1553
         * Note 1: not all "motherboard" support this detection
         * Note 2: if no udma 66 device, the detection may "error".
         *         but in this case, we will not set the device to
         *         ultra 66, the detection result is not important
         */

        /*
         * enable "Cable Detection", m5229, 0x4b, bit3
         */
        pci_read_config_byte(dev, 0x4b, &tmpbyte);
        pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08);

        /*
         * We should only tune the 1533 enable if we are using an ALi
         * North bridge. We might have no north found on some zany
         * box without a device at 0:0.0. The ALi bridge will be at
         * 0:0.0 so if we didn't find one we know what is cooking.
         */
        if (north && north->vendor != PCI_VENDOR_ID_AL)
                goto out;

        if (m5229_revision < 0xC5 && isa_dev)
        {       
                /*
                 * set south-bridge's enable bit, m1533, 0x79
                 */

                pci_read_config_byte(isa_dev, 0x79, &tmpbyte);
                if (m5229_revision == 0xC2) {
                        /*
                         * 1543C-B0 (m1533, 0x79, bit 2)
                         */
                        pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04);
                } else if (m5229_revision >= 0xC3) {
                        /*
                         * 1553/1535 (m1533, 0x79, bit 1)
                         */
                        pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
                }
        }
out:
        pci_dev_put(north);
        pci_dev_put(isa_dev);
        local_irq_restore(flags);
        return 0;
}

/*
 *      Cable special cases
 */

static const struct dmi_system_id cable_dmi_table[] = {
        {
                .ident = "HP Pavilion N5430",
                .matches = {
                        DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
                        DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
                },
        },
        {
                .ident = "Toshiba Satellite S1800-814",
                .matches = {
                        DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
                        DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
                },
        },
        { }
};

static int ali_cable_override(struct pci_dev *pdev)
{
        /* Fujitsu P2000 */
        if (pdev->subsystem_vendor == 0x10CF &&
            pdev->subsystem_device == 0x10AF)
                return 1;

        /* Systems by DMI */
        if (dmi_check_system(cable_dmi_table))
                return 1;

        return 0;
}

/**
 *      ata66_ali15x3   -       check for UDMA 66 support
 *      @hwif: IDE interface
 *
 *      This checks if the controller and the cable are capable
 *      of UDMA66 transfers. It doesn't check the drives.
 *      But see note 2 below!
 *
 *      FIXME: frobs bits that are not defined on newer ALi devicea
 */

static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
{
        struct pci_dev *dev     = hwif->pci_dev;
        unsigned long flags;
        u8 cbl = ATA_CBL_PATA40, tmpbyte;

        local_irq_save(flags);

        if (m5229_revision >= 0xC2) {
                /*
                 * m5229 80-pin cable detection (from Host View)
                 *
                 * 0x4a bit0 is 0 => primary channel has 80-pin
                 * 0x4a bit1 is 0 => secondary channel has 80-pin
                 *
                 * Certain laptops use short but suitable cables
                 * and don't implement the detect logic.
                 */
                if (ali_cable_override(dev))
                        cbl = ATA_CBL_PATA40_SHORT;
                else {
                        pci_read_config_byte(dev, 0x4a, &tmpbyte);
                        if ((tmpbyte & (1 << hwif->channel)) == 0)
                                cbl = ATA_CBL_PATA80;
                }
        } else {
                /*
                 * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
                 */
                pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
                chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
        }

        /*
         * CD_ROM DMA on (m5229, 0x53, bit0)
         *      Enable this bit even if we want to use PIO
         * PIO FIFO off (m5229, 0x53, bit1)
         *      The hardware will use 0x54h and 0x55h to control PIO FIFO
         *      (Not on later devices it seems)
         *
         *      0x53 changes meaning on later revs - we must no touch
         *      bit 1 on them. Need to check if 0x20 is the right break
         */
         
        pci_read_config_byte(dev, 0x53, &tmpbyte);
        
        if(m5229_revision <= 0x20)
                tmpbyte = (tmpbyte & (~0x02)) | 0x01;
        else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
                tmpbyte |= 0x03;
        else
                tmpbyte |= 0x01;

        pci_write_config_byte(dev, 0x53, tmpbyte);

        local_irq_restore(flags);

        return cbl;
}

/**
 *      init_hwif_common_ali15x3        -       Set up ALI IDE hardware
 *      @hwif: IDE interface
 *
 *      Initialize the IDE structure side of the ALi 15x3 driver.
 */
 
static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
{
        hwif->set_pio_mode = &ali_set_pio_mode;
        hwif->set_dma_mode = &ali_set_dma_mode;
        hwif->udma_filter = &ali_udma_filter;

        /* don't use LBA48 DMA on ALi devices before rev 0xC5 */
        hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0;

        if (!hwif->dma_base) {
                hwif->drives[0].autotune = 1;
                hwif->drives[1].autotune = 1;
                return;
        }

        /*
         * check in ->init_dma guarantees m5229_revision >= 0x20 here
         */

        if (m5229_revision > 0x20)
                hwif->atapi_dma = 1;

        if (m5229_revision <= 0x20)
                hwif->ultra_mask = 0x00; /* no udma */
        else if (m5229_revision < 0xC2)
                hwif->ultra_mask = 0x07; /* udma0-2 */
        else if (m5229_revision == 0xC2 || m5229_revision == 0xC3)
                hwif->ultra_mask = 0x1f; /* udma0-4 */
        else if (m5229_revision == 0xC4)
                hwif->ultra_mask = 0x3f; /* udma0-5 */
        else
                hwif->ultra_mask = 0x7f; /* udma0-6 */

        hwif->mwdma_mask = 0x07;
        hwif->swdma_mask = 0x07;

        hwif->dma_setup = &ali15x3_dma_setup;

        if (hwif->cbl != ATA_CBL_PATA40_SHORT)
                hwif->cbl = ata66_ali15x3(hwif);
}

/**
 *      init_hwif_ali15x3       -       Initialize the ALI IDE x86 stuff
 *      @hwif: interface to configure
 *
 *      Obtain the IRQ tables for an ALi based IDE solution on the PC
 *      class platforms. This part of the code isn't applicable to the
 *      Sparc systems
 */

static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
{
        u8 ideic, inmir;
        s8 irq_routing_table[] = { -1,  9, 3, 10, 4,  5, 7,  6,
                                      1, 11, 0, 12, 0, 14, 0, 15 };
        int irq = -1;

        if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229)
                hwif->irq = hwif->channel ? 15 : 14;

        if (isa_dev) {
                /*
                 * read IDE interface control
                 */
                pci_read_config_byte(isa_dev, 0x58, &ideic);

                /* bit0, bit1 */
                ideic = ideic & 0x03;

                /* get IRQ for IDE Controller */
                if ((hwif->channel && ideic == 0x03) ||
                    (!hwif->channel && !ideic)) {
                        /*
                         * get SIRQ1 routing table
                         */
                        pci_read_config_byte(isa_dev, 0x44, &inmir);
                        inmir = inmir & 0x0f;
                        irq = irq_routing_table[inmir];
                } else if (hwif->channel && !(ideic & 0x01)) {
                        /*
                         * get SIRQ2 routing table
                         */
                        pci_read_config_byte(isa_dev, 0x75, &inmir);
                        inmir = inmir & 0x0f;
                        irq = irq_routing_table[inmir];
                }
                if(irq >= 0)
                        hwif->irq = irq;
        }

        init_hwif_common_ali15x3(hwif);
}

/**
 *      init_dma_ali15x3        -       set up DMA on ALi15x3
 *      @hwif: IDE interface
 *      @dmabase: DMA interface base PCI address
 *
 *      Set up the DMA functionality on the ALi 15x3. For the ALi
 *      controllers this is generic so we can let the generic code do
 *      the actual work.
 */

static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
{
        if (m5229_revision < 0x20)
                return;
        if (!hwif->channel)
                outb(inb(dmabase + 2) & 0x60, dmabase + 2);
        ide_setup_dma(hwif, dmabase, 8);
}

static ide_pci_device_t ali15x3_chipset __devinitdata = {
        .name           = "ALI15X3",
        .init_chipset   = init_chipset_ali15x3,
        .init_hwif      = init_hwif_ali15x3,
        .init_dma       = init_dma_ali15x3,
        .autodma        = AUTODMA,
        .bootable       = ON_BOARD,
        .pio_mask       = ATA_PIO5,
};

/**
 *      alim15x3_init_one       -       set up an ALi15x3 IDE controller
 *      @dev: PCI device to set up
 *
 *      Perform the actual set up for an ALi15x3 that has been found by the
 *      hot plug layer.
 */
 
static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
        static struct pci_device_id ati_rs100[] = {
                { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) },
                { },
        };

        ide_pci_device_t *d = &ali15x3_chipset;

        if (pci_dev_present(ati_rs100))
                printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");

#if defined(CONFIG_SPARC64)
        d->init_hwif = init_hwif_common_ali15x3;
#endif /* CONFIG_SPARC64 */
        return ide_setup_pci_device(dev, d);
}


static const struct pci_device_id alim15x3_pci_tbl[] = {
        { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
        { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 0 },
        { 0, },
};
MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);

static struct pci_driver driver = {
        .name           = "ALI15x3_IDE",
        .id_table       = alim15x3_pci_tbl,
        .probe          = alim15x3_init_one,
};

static int __init ali15x3_ide_init(void)
{
        return ide_pci_register_driver(&driver);
}

module_init(ali15x3_ide_init);

MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
MODULE_LICENSE("GPL");