drivers/net/cxgb3/firmware_exports.h

   1 /*
   2  * Copyright (c) 2004-2007 Chelsio, Inc. All rights reserved.
   3  *
   4  * This software is available to you under a choice of one of two
   5  * licenses.  You may choose to be licensed under the terms of the GNU
   6  * General Public License (GPL) Version 2, available from the file
   7  * COPYING in the main directory of this source tree, or the
   8  * OpenIB.org BSD license below:
   9  *
  10  *     Redistribution and use in source and binary forms, with or
  11  *     without modification, are permitted provided that the following
  12  *     conditions are met:
  13  *
  14  *      - Redistributions of source code must retain the above
  15  *        copyright notice, this list of conditions and the following
  16  *        disclaimer.
  17  *
  18  *      - Redistributions in binary form must reproduce the above
  19  *        copyright notice, this list of conditions and the following
  20  *        disclaimer in the documentation and/or other materials
  21  *        provided with the distribution.
  22  *
  23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30  * SOFTWARE.
  31  */
  32 #ifndef _FIRMWARE_EXPORTS_H_
  33 #define _FIRMWARE_EXPORTS_H_
  34
  35 /* WR OPCODES supported by the firmware.
  36  */
  37 #define FW_WROPCODE_FORWARD                     0x01
  38 #define FW_WROPCODE_BYPASS                      0x05
  39
  40 #define FW_WROPCODE_TUNNEL_TX_PKT               0x03
  41
  42 #define FW_WROPOCDE_ULPTX_DATA_SGL              0x00
  43 #define FW_WROPCODE_ULPTX_MEM_READ              0x02
  44 #define FW_WROPCODE_ULPTX_PKT                   0x04
  45 #define FW_WROPCODE_ULPTX_INVALIDATE            0x06
  46
  47 #define FW_WROPCODE_TUNNEL_RX_PKT               0x07
  48
  49 #define FW_WROPCODE_OFLD_GETTCB_RPL             0x08
  50 #define FW_WROPCODE_OFLD_CLOSE_CON              0x09
  51 #define FW_WROPCODE_OFLD_TP_ABORT_CON_REQ       0x0A
  52 #define FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL     0x0F
  53 #define FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ     0x0B
  54 #define FW_WROPCODE_OFLD_TP_ABORT_CON_RPL       0x0C
  55 #define FW_WROPCODE_OFLD_TX_DATA                0x0D
  56 #define FW_WROPCODE_OFLD_TX_DATA_ACK            0x0E
  57
  58 #define FW_WROPCODE_RI_RDMA_INIT                0x10
  59 #define FW_WROPCODE_RI_RDMA_WRITE               0x11
  60 #define FW_WROPCODE_RI_RDMA_READ_REQ            0x12
  61 #define FW_WROPCODE_RI_RDMA_READ_RESP           0x13
  62 #define FW_WROPCODE_RI_SEND                     0x14
  63 #define FW_WROPCODE_RI_TERMINATE                0x15
  64 #define FW_WROPCODE_RI_RDMA_READ                0x16
  65 #define FW_WROPCODE_RI_RECEIVE                  0x17
  66 #define FW_WROPCODE_RI_BIND_MW                  0x18
  67 #define FW_WROPCODE_RI_FASTREGISTER_MR          0x19
  68 #define FW_WROPCODE_RI_LOCAL_INV                0x1A
  69 #define FW_WROPCODE_RI_MODIFY_QP                0x1B
  70 #define FW_WROPCODE_RI_BYPASS                   0x1C
  71
  72 #define FW_WROPOCDE_RSVD                        0x1E
  73
  74 #define FW_WROPCODE_SGE_EGRESSCONTEXT_RR        0x1F
  75
  76 #define FW_WROPCODE_MNGT                        0x1D
  77 #define FW_MNGTOPCODE_PKTSCHED_SET              0x00
  78
  79 /* Maximum size of a WR sent from the host, limited by the SGE.
  80  *
  81  * Note: WR coming from ULP or TP are only limited by CIM.
  82  */
  83 #define FW_WR_SIZE                      128
  84
  85 /* Maximum number of outstanding WRs sent from the host. Value must be
  86  * programmed in the CTRL/TUNNEL/QP SGE Egress Context and used by
  87  * offload modules to limit the number of WRs per connection.
  88  */
  89 #define FW_T3_WR_NUM                    16
  90 #define FW_N3_WR_NUM                    7
  91
  92 #ifndef N3
  93 # define FW_WR_NUM                      FW_T3_WR_NUM
  94 #else
  95 # define FW_WR_NUM                      FW_N3_WR_NUM
  96 #endif
  97
  98 /* FW_TUNNEL_NUM corresponds to the number of supported TUNNEL Queues. These
  99  * queues must start at SGE Egress Context FW_TUNNEL_SGEEC_START and must
 100  * start at 'TID' (or 'uP Token') FW_TUNNEL_TID_START.
 101  *
 102  * Ingress Traffic (e.g. DMA completion credit)  for TUNNEL Queue[i] is sent
 103  * to RESP Queue[i].
 104  */
 105 #define FW_TUNNEL_NUM                   8
 106 #define FW_TUNNEL_SGEEC_START           8
 107 #define FW_TUNNEL_TID_START             65544
 108
 109 /* FW_CTRL_NUM corresponds to the number of supported CTRL Queues. These queues
 110  * must start at SGE Egress Context FW_CTRL_SGEEC_START and must start at 'TID'
 111  * (or 'uP Token') FW_CTRL_TID_START.
 112  *
 113  * Ingress Traffic for CTRL Queue[i] is sent to RESP Queue[i].
 114  */
 115 #define FW_CTRL_NUM                     8
 116 #define FW_CTRL_SGEEC_START             65528
 117 #define FW_CTRL_TID_START               65536
 118
 119 /* FW_OFLD_NUM corresponds to the number of supported OFFLOAD Queues. These
 120  * queues must start at SGE Egress Context FW_OFLD_SGEEC_START.
 121  *
 122  * Note: the 'uP Token' in the SGE Egress Context fields is irrelevant for
 123  * OFFLOAD Queues, as the host is responsible for providing the correct TID in
 124  * every WR.
 125  *
 126  * Ingress Trafffic for OFFLOAD Queue[i] is sent to RESP Queue[i].
 127  */
 128 #define FW_OFLD_NUM                     8
 129 #define FW_OFLD_SGEEC_START             0
 130
 131 /*
 132  *
 133  */
 134 #define FW_RI_NUM                       1
 135 #define FW_RI_SGEEC_START               65527
 136 #define FW_RI_TID_START                 65552
 137
 138 /*
 139  * The RX_PKT_TID
 140  */
 141 #define FW_RX_PKT_NUM                   1
 142 #define FW_RX_PKT_TID_START             65553
 143
 144 /* FW_WRC_NUM corresponds to the number of Work Request Context that supported
 145  * by the firmware.
 146  */
 147 #define FW_WRC_NUM                      \
 148     (65536 + FW_TUNNEL_NUM + FW_CTRL_NUM + FW_RI_NUM + FW_RX_PKT_NUM)
 149
 150 /*
 151  * FW type and version.
 152  */
 153 #define S_FW_VERSION_TYPE               28
 154 #define M_FW_VERSION_TYPE               0xF
 155 #define V_FW_VERSION_TYPE(x)            ((x) << S_FW_VERSION_TYPE)
 156 #define G_FW_VERSION_TYPE(x)            \
 157     (((x) >> S_FW_VERSION_TYPE) & M_FW_VERSION_TYPE)
 158
 159 #define S_FW_VERSION_MAJOR              16
 160 #define M_FW_VERSION_MAJOR              0xFFF
 161 #define V_FW_VERSION_MAJOR(x)           ((x) << S_FW_VERSION_MAJOR)
 162 #define G_FW_VERSION_MAJOR(x)           \
 163     (((x) >> S_FW_VERSION_MAJOR) & M_FW_VERSION_MAJOR)
 164
 165 #define S_FW_VERSION_MINOR              8
 166 #define M_FW_VERSION_MINOR              0xFF
 167 #define V_FW_VERSION_MINOR(x)           ((x) << S_FW_VERSION_MINOR)
 168 #define G_FW_VERSION_MINOR(x)           \
 169     (((x) >> S_FW_VERSION_MINOR) & M_FW_VERSION_MINOR)
 170
 171 #define S_FW_VERSION_MICRO              0
 172 #define M_FW_VERSION_MICRO              0xFF
 173 #define V_FW_VERSION_MICRO(x)           ((x) << S_FW_VERSION_MICRO)
 174 #define G_FW_VERSION_MICRO(x)           \
 175     (((x) >> S_FW_VERSION_MICRO) & M_FW_VERSION_MICRO)
 176
 177 #endif                          /* _FIRMWARE_EXPORTS_H_ */