pcmcia: CompactFlash driver for PA Semi Electra boards
[pv_ops_mirror.git] / drivers / net / wireless / libertas / host.h
blobb37ddbca969f74dd1e056b358f6f2fdebbca0ef4
1 /**
2 * This file contains definitions of WLAN commands.
3 */
5 #ifndef _HOST_H_
6 #define _HOST_H_
8 /** PUBLIC DEFINITIONS */
9 #define DEFAULT_AD_HOC_CHANNEL 6
10 #define DEFAULT_AD_HOC_CHANNEL_A 36
12 /** IEEE 802.11 oids */
13 #define OID_802_11_SSID 0x00008002
14 #define OID_802_11_INFRASTRUCTURE_MODE 0x00008008
15 #define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009
16 #define OID_802_11_RTS_THRESHOLD 0x0000800A
17 #define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D
18 #define OID_802_11_SUPPORTED_RATES 0x0000800E
19 #define OID_802_11_STATISTICS 0x00008012
20 #define OID_802_11_TX_RETRYCOUNT 0x0000801D
21 #define OID_802_11D_ENABLE 0x00008020
23 #define CMD_OPTION_WAITFORRSP 0x0002
25 /** Host command IDs */
27 /* Return command are almost always the same as the host command, but with
28 * bit 15 set high. There are a few exceptions, though...
30 #define CMD_RET(cmd) (0x8000 | cmd)
32 /* Return command convention exceptions: */
33 #define CMD_RET_802_11_ASSOCIATE 0x8012
35 /* Command codes */
36 #define CMD_CODE_DNLD 0x0002
37 #define CMD_GET_HW_SPEC 0x0003
38 #define CMD_EEPROM_UPDATE 0x0004
39 #define CMD_802_11_RESET 0x0005
40 #define CMD_802_11_SCAN 0x0006
41 #define CMD_802_11_GET_LOG 0x000b
42 #define CMD_MAC_MULTICAST_ADR 0x0010
43 #define CMD_802_11_AUTHENTICATE 0x0011
44 #define CMD_802_11_EEPROM_ACCESS 0x0059
45 #define CMD_802_11_ASSOCIATE 0x0050
46 #define CMD_802_11_SET_WEP 0x0013
47 #define CMD_802_11_GET_STAT 0x0014
48 #define CMD_802_3_GET_STAT 0x0015
49 #define CMD_802_11_SNMP_MIB 0x0016
50 #define CMD_MAC_REG_MAP 0x0017
51 #define CMD_BBP_REG_MAP 0x0018
52 #define CMD_MAC_REG_ACCESS 0x0019
53 #define CMD_BBP_REG_ACCESS 0x001a
54 #define CMD_RF_REG_ACCESS 0x001b
55 #define CMD_802_11_RADIO_CONTROL 0x001c
56 #define CMD_802_11_RF_CHANNEL 0x001d
57 #define CMD_802_11_RF_TX_POWER 0x001e
58 #define CMD_802_11_RSSI 0x001f
59 #define CMD_802_11_RF_ANTENNA 0x0020
61 #define CMD_802_11_PS_MODE 0x0021
63 #define CMD_802_11_DATA_RATE 0x0022
64 #define CMD_RF_REG_MAP 0x0023
65 #define CMD_802_11_DEAUTHENTICATE 0x0024
66 #define CMD_802_11_REASSOCIATE 0x0025
67 #define CMD_802_11_DISASSOCIATE 0x0026
68 #define CMD_MAC_CONTROL 0x0028
69 #define CMD_802_11_AD_HOC_START 0x002b
70 #define CMD_802_11_AD_HOC_JOIN 0x002c
72 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
73 #define CMD_802_11_ENABLE_RSN 0x002f
74 #define CMD_802_11_PAIRWISE_TSC 0x0036
75 #define CMD_802_11_GROUP_TSC 0x0037
76 #define CMD_802_11_KEY_MATERIAL 0x005e
78 #define CMD_802_11_SET_AFC 0x003c
79 #define CMD_802_11_GET_AFC 0x003d
81 #define CMD_802_11_AD_HOC_STOP 0x0040
83 #define CMD_802_11_BEACON_STOP 0x0049
85 #define CMD_802_11_MAC_ADDRESS 0x004D
86 #define CMD_802_11_EEPROM_ACCESS 0x0059
88 #define CMD_802_11_BAND_CONFIG 0x0058
90 #define CMD_802_11D_DOMAIN_INFO 0x005b
92 #define CMD_802_11_SLEEP_PARAMS 0x0066
94 #define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
96 #define CMD_802_11_TPC_CFG 0x0072
97 #define CMD_802_11_PWR_CFG 0x0073
99 #define CMD_802_11_LED_GPIO_CTRL 0x004e
101 #define CMD_802_11_SUBSCRIBE_EVENT 0x0075
103 #define CMD_802_11_RATE_ADAPT_RATESET 0x0076
105 #define CMD_802_11_TX_RATE_QUERY 0x007f
107 #define CMD_GET_TSF 0x0080
109 #define CMD_BT_ACCESS 0x0087
111 #define CMD_FWT_ACCESS 0x0095
113 #define CMD_802_11_MONITOR_MODE 0x0098
115 #define CMD_MESH_ACCESS 0x009b
117 #define CMD_SET_BOOT2_VER 0x00a5
119 /* For the IEEE Power Save */
120 #define CMD_SUBCMD_ENTER_PS 0x0030
121 #define CMD_SUBCMD_EXIT_PS 0x0031
122 #define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
123 #define CMD_SUBCMD_FULL_POWERDOWN 0x0035
124 #define CMD_SUBCMD_FULL_POWERUP 0x0036
126 #define CMD_ENABLE_RSN 0x0001
127 #define CMD_DISABLE_RSN 0x0000
129 #define CMD_ACT_SET 0x0001
130 #define CMD_ACT_GET 0x0000
132 #define CMD_ACT_GET_AES (CMD_ACT_GET + 2)
133 #define CMD_ACT_SET_AES (CMD_ACT_SET + 2)
134 #define CMD_ACT_REMOVE_AES (CMD_ACT_SET + 3)
136 /* Define action or option for CMD_802_11_SET_WEP */
137 #define CMD_ACT_ADD 0x0002
138 #define CMD_ACT_REMOVE 0x0004
139 #define CMD_ACT_USE_DEFAULT 0x0008
141 #define CMD_TYPE_WEP_40_BIT 0x01
142 #define CMD_TYPE_WEP_104_BIT 0x02
144 #define CMD_NUM_OF_WEP_KEYS 4
146 #define CMD_WEP_KEY_INDEX_MASK 0x3fff
148 /* Define action or option for CMD_802_11_RESET */
149 #define CMD_ACT_HALT 0x0003
151 /* Define action or option for CMD_802_11_SCAN */
152 #define CMD_BSS_TYPE_BSS 0x0001
153 #define CMD_BSS_TYPE_IBSS 0x0002
154 #define CMD_BSS_TYPE_ANY 0x0003
156 /* Define action or option for CMD_802_11_SCAN */
157 #define CMD_SCAN_TYPE_ACTIVE 0x0000
158 #define CMD_SCAN_TYPE_PASSIVE 0x0001
160 #define CMD_SCAN_RADIO_TYPE_BG 0
162 #define CMD_SCAN_PROBE_DELAY_TIME 0
164 /* Define action or option for CMD_MAC_CONTROL */
165 #define CMD_ACT_MAC_RX_ON 0x0001
166 #define CMD_ACT_MAC_TX_ON 0x0002
167 #define CMD_ACT_MAC_LOOPBACK_ON 0x0004
168 #define CMD_ACT_MAC_WEP_ENABLE 0x0008
169 #define CMD_ACT_MAC_INT_ENABLE 0x0010
170 #define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
171 #define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
172 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
173 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
174 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
176 /* Define action or option for CMD_802_11_RADIO_CONTROL */
177 #define CMD_TYPE_AUTO_PREAMBLE 0x0001
178 #define CMD_TYPE_SHORT_PREAMBLE 0x0002
179 #define CMD_TYPE_LONG_PREAMBLE 0x0003
181 #define TURN_ON_RF 0x01
182 #define RADIO_ON 0x01
183 #define RADIO_OFF 0x00
185 #define SET_AUTO_PREAMBLE 0x05
186 #define SET_SHORT_PREAMBLE 0x03
187 #define SET_LONG_PREAMBLE 0x01
189 /* Define action or option for CMD_802_11_RF_CHANNEL */
190 #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
191 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
193 /* Define action or option for CMD_802_11_RF_TX_POWER */
194 #define CMD_ACT_TX_POWER_OPT_GET 0x0000
195 #define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007
196 #define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004
197 #define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000
199 #define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007
200 #define CMD_ACT_TX_POWER_INDEX_MID 0x0004
201 #define CMD_ACT_TX_POWER_INDEX_LOW 0x0000
203 /* Define action or option for CMD_802_11_DATA_RATE */
204 #define CMD_ACT_SET_TX_AUTO 0x0000
205 #define CMD_ACT_SET_TX_FIX_RATE 0x0001
206 #define CMD_ACT_GET_TX_RATE 0x0002
208 #define CMD_ACT_SET_RX 0x0001
209 #define CMD_ACT_SET_TX 0x0002
210 #define CMD_ACT_SET_BOTH 0x0003
211 #define CMD_ACT_GET_RX 0x0004
212 #define CMD_ACT_GET_TX 0x0008
213 #define CMD_ACT_GET_BOTH 0x000c
215 /* Define action or option for CMD_802_11_PS_MODE */
216 #define CMD_TYPE_CAM 0x0000
217 #define CMD_TYPE_MAX_PSP 0x0001
218 #define CMD_TYPE_FAST_PSP 0x0002
220 /* Define action or option for CMD_BT_ACCESS */
221 enum cmd_bt_access_opts {
222 /* The bt commands start at 5 instead of 1 because the old dft commands
223 * are mapped to 1-4. These old commands are no longer maintained and
224 * should not be called.
226 CMD_ACT_BT_ACCESS_ADD = 5,
227 CMD_ACT_BT_ACCESS_DEL,
228 CMD_ACT_BT_ACCESS_LIST,
229 CMD_ACT_BT_ACCESS_RESET,
230 CMD_ACT_BT_ACCESS_SET_INVERT,
231 CMD_ACT_BT_ACCESS_GET_INVERT
234 /* Define action or option for CMD_FWT_ACCESS */
235 enum cmd_fwt_access_opts {
236 CMD_ACT_FWT_ACCESS_ADD = 1,
237 CMD_ACT_FWT_ACCESS_DEL,
238 CMD_ACT_FWT_ACCESS_LOOKUP,
239 CMD_ACT_FWT_ACCESS_LIST,
240 CMD_ACT_FWT_ACCESS_LIST_route,
241 CMD_ACT_FWT_ACCESS_LIST_neighbor,
242 CMD_ACT_FWT_ACCESS_RESET,
243 CMD_ACT_FWT_ACCESS_CLEANUP,
244 CMD_ACT_FWT_ACCESS_TIME,
247 /* Define action or option for CMD_MESH_ACCESS */
248 enum cmd_mesh_access_opts {
249 CMD_ACT_MESH_GET_TTL = 1,
250 CMD_ACT_MESH_SET_TTL,
251 CMD_ACT_MESH_GET_STATS,
252 CMD_ACT_MESH_GET_ANYCAST,
253 CMD_ACT_MESH_SET_ANYCAST,
254 CMD_ACT_MESH_SET_LINK_COSTS,
255 CMD_ACT_MESH_GET_LINK_COSTS,
256 CMD_ACT_MESH_SET_BCAST_RATE,
257 CMD_ACT_MESH_GET_BCAST_RATE,
258 CMD_ACT_MESH_SET_RREQ_DELAY,
259 CMD_ACT_MESH_GET_RREQ_DELAY,
260 CMD_ACT_MESH_SET_ROUTE_EXP,
261 CMD_ACT_MESH_GET_ROUTE_EXP,
262 CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
263 CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
266 /** Card Event definition */
267 #define MACREG_INT_CODE_TX_PPA_FREE 0x00000000
268 #define MACREG_INT_CODE_TX_DMA_DONE 0x00000001
269 #define MACREG_INT_CODE_LINK_LOSE_W_SCAN 0x00000002
270 #define MACREG_INT_CODE_LINK_LOSE_NO_SCAN 0x00000003
271 #define MACREG_INT_CODE_LINK_SENSED 0x00000004
272 #define MACREG_INT_CODE_CMD_FINISHED 0x00000005
273 #define MACREG_INT_CODE_MIB_CHANGED 0x00000006
274 #define MACREG_INT_CODE_INIT_DONE 0x00000007
275 #define MACREG_INT_CODE_DEAUTHENTICATED 0x00000008
276 #define MACREG_INT_CODE_DISASSOCIATED 0x00000009
277 #define MACREG_INT_CODE_PS_AWAKE 0x0000000a
278 #define MACREG_INT_CODE_PS_SLEEP 0x0000000b
279 #define MACREG_INT_CODE_MIC_ERR_MULTICAST 0x0000000d
280 #define MACREG_INT_CODE_MIC_ERR_UNICAST 0x0000000e
281 #define MACREG_INT_CODE_WM_AWAKE 0x0000000f
282 #define MACREG_INT_CODE_ADHOC_BCN_LOST 0x00000011
283 #define MACREG_INT_CODE_RSSI_LOW 0x00000019
284 #define MACREG_INT_CODE_SNR_LOW 0x0000001a
285 #define MACREG_INT_CODE_MAX_FAIL 0x0000001b
286 #define MACREG_INT_CODE_RSSI_HIGH 0x0000001c
287 #define MACREG_INT_CODE_SNR_HIGH 0x0000001d
288 #define MACREG_INT_CODE_MESH_AUTO_STARTED 0x00000023
290 #endif /* _HOST_H_ */