pcmcia: CompactFlash driver for PA Semi Electra boards
[pv_ops_mirror.git] / drivers / scsi / arm / fas216.h
blob00e5f055afdc5fff16d80cf7e15ab123dd209b3f
1 /*
2 * linux/drivers/acorn/scsi/fas216.h
4 * Copyright (C) 1997-2000 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * FAS216 generic driver
12 #ifndef FAS216_H
13 #define FAS216_H
15 #ifndef NO_IRQ
16 #define NO_IRQ 255
17 #endif
19 #include "queue.h"
20 #include "msgqueue.h"
22 /* FAS register definitions */
24 /* transfer count low */
25 #define REG_CTCL (0)
26 #define REG_STCL (0)
28 /* transfer count medium */
29 #define REG_CTCM (1)
30 #define REG_STCM (1)
32 /* fifo data */
33 #define REG_FF (2)
35 /* command */
36 #define REG_CMD (3)
37 #define CMD_NOP 0x00
38 #define CMD_FLUSHFIFO 0x01
39 #define CMD_RESETCHIP 0x02
40 #define CMD_RESETSCSI 0x03
42 #define CMD_TRANSFERINFO 0x10
43 #define CMD_INITCMDCOMPLETE 0x11
44 #define CMD_MSGACCEPTED 0x12
45 #define CMD_PADBYTES 0x18
46 #define CMD_SETATN 0x1a
47 #define CMD_RSETATN 0x1b
49 #define CMD_SELECTWOATN 0x41
50 #define CMD_SELECTATN 0x42
51 #define CMD_SELECTATNSTOP 0x43
52 #define CMD_ENABLESEL 0x44
53 #define CMD_DISABLESEL 0x45
54 #define CMD_SELECTATN3 0x46
55 #define CMD_RESEL3 0x47
57 #define CMD_WITHDMA 0x80
59 /* status register (read) */
60 #define REG_STAT (4)
61 #define STAT_IO (1 << 0) /* IO phase */
62 #define STAT_CD (1 << 1) /* CD phase */
63 #define STAT_MSG (1 << 2) /* MSG phase */
64 #define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */
65 #define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */
66 #define STAT_PARITYERROR (1 << 5) /* Parity error */
67 #define STAT_REALBAD (1 << 6) /* Something bad */
68 #define STAT_INT (1 << 7) /* Interrupt */
70 #define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO)
71 #define STAT_DATAOUT (0) /* Data out */
72 #define STAT_DATAIN (STAT_IO) /* Data in */
73 #define STAT_COMMAND (STAT_CD) /* Command out */
74 #define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */
75 #define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */
76 #define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */
78 /* bus ID for select / reselect */
79 #define REG_SDID (4)
80 #define BUSID(target) ((target) & 7)
82 /* Interrupt status register (read) */
83 #define REG_INST (5)
84 #define INST_SELWOATN (1 << 0) /* Select w/o ATN */
85 #define INST_SELATN (1 << 1) /* Select w/ATN */
86 #define INST_RESELECTED (1 << 2) /* Reselected */
87 #define INST_FUNCDONE (1 << 3) /* Function done */
88 #define INST_BUSSERVICE (1 << 4) /* Bus service */
89 #define INST_DISCONNECT (1 << 5) /* Disconnect */
90 #define INST_ILLEGALCMD (1 << 6) /* Illegal command */
91 #define INST_BUSRESET (1 << 7) /* SCSI Bus reset */
93 /* Timeout register (write) */
94 #define REG_STIM (5)
96 /* Sequence step register (read) */
97 #define REG_IS (6)
98 #define IS_BITS 0x07
99 #define IS_SELARB 0x00 /* Select & Arb ok */
100 #define IS_MSGBYTESENT 0x01 /* One byte message sent*/
101 #define IS_NOTCOMMAND 0x02 /* Not in command state */
102 #define IS_EARLYPHASE 0x03 /* Early phase change */
103 #define IS_COMPLETE 0x04 /* Command ok */
104 #define IS_SOF 0x08 /* Sync off flag */
106 /* Transfer period step (write) */
107 #define REG_STP (6)
109 /* Synchronous Offset (write) */
110 #define REG_SOF (7)
112 /* Fifo state register (read) */
113 #define REG_CFIS (7)
114 #define CFIS_CF 0x1f /* Num bytes in FIFO */
115 #define CFIS_IS 0xe0 /* Step */
117 /* config register 1 */
118 #define REG_CNTL1 (8)
119 #define CNTL1_CID (7 << 0) /* Chip ID */
120 #define CNTL1_STE (1 << 3) /* Self test enable */
121 #define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */
122 #define CNTL1_PTE (1 << 5) /* Parity test enable */
123 #define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */
124 #define CNTL1_ETM (1 << 7) /* Extended Timing Mode */
126 /* Clock conversion factor (read) */
127 #define REG_CLKF (9)
128 #define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */
129 #define CLKF_F10MHZ 0x02 /* 10 MHz */
130 #define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */
131 #define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */
132 #define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */
133 #define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */
134 #define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */
136 /* Chip test register (write) */
137 #define REG_FTM (10)
138 #define TEST_FTM 0x01 /* Force target mode */
139 #define TEST_FIM 0x02 /* Force initiator mode */
140 #define TEST_FHI 0x04 /* Force high impedance mode */
142 /* Configuration register 2 (read/write) */
143 #define REG_CNTL2 (11)
144 #define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */
145 #define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */
146 #define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */
147 #define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */
148 #define CNTL2_TSDR (1 << 4) /* Tristate DREQ */
149 #define CNTL2_SBO (1 << 5) /* Select Byte Order */
150 #define CNTL2_ENF (1 << 6) /* Enable features */
151 #define CNTL2_DAE (1 << 7) /* Data Alignment Enable */
153 /* Configuration register 3 (read/write) */
154 #define REG_CNTL3 (12)
155 #define CNTL3_BS8 (1 << 0) /* Burst size 8 */
156 #define CNTL3_MDM (1 << 1) /* Modify DMA mode */
157 #define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */
158 #define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */
159 #define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */
160 #define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */
161 #define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */
162 #define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */
164 /* High transfer count (read/write) */
165 #define REG_CTCH (14)
166 #define REG_STCH (14)
168 /* ID register (read only) */
169 #define REG_ID (14)
171 /* Data alignment */
172 #define REG_DAL (15)
174 typedef enum {
175 PHASE_IDLE, /* we're not planning on doing anything */
176 PHASE_SELECTION, /* selecting a device */
177 PHASE_SELSTEPS, /* selection with command steps */
178 PHASE_COMMAND, /* command sent */
179 PHASE_MESSAGESENT, /* selected, and we're sending cmd */
180 PHASE_DATAOUT, /* data out to device */
181 PHASE_DATAIN, /* data in from device */
182 PHASE_MSGIN, /* message in from device */
183 PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */
184 PHASE_MSGOUT, /* after message out phase */
185 PHASE_MSGOUT_EXPECT, /* expecting message out */
186 PHASE_STATUS, /* status from device */
187 PHASE_DONE /* Command complete */
188 } phase_t;
190 typedef enum {
191 DMA_OUT, /* DMA from memory to chip */
192 DMA_IN /* DMA from chip to memory */
193 } fasdmadir_t;
195 typedef enum {
196 fasdma_none, /* No dma */
197 fasdma_pio, /* PIO mode */
198 fasdma_pseudo, /* Pseudo DMA */
199 fasdma_real_block, /* Real DMA, on block by block basis */
200 fasdma_real_all /* Real DMA, on request by request */
201 } fasdmatype_t;
203 typedef enum {
204 neg_wait, /* Negociate with device */
205 neg_inprogress, /* Negociation sent */
206 neg_complete, /* Negociation complete */
207 neg_targcomplete, /* Target completed negociation */
208 neg_invalid /* Negociation not supported */
209 } neg_t;
211 #define MAGIC 0x441296bdUL
212 #define NR_MSGS 8
214 #define FASCAP_DMA (1 << 0)
215 #define FASCAP_PSEUDODMA (1 << 1)
217 typedef struct {
218 unsigned long magic_start;
219 spinlock_t host_lock;
220 struct Scsi_Host *host; /* host */
221 struct scsi_cmnd *SCpnt; /* currently processing command */
222 struct scsi_cmnd *origSCpnt; /* original connecting command */
223 struct scsi_cmnd *reqSCpnt; /* request sense command */
224 struct scsi_cmnd *rstSCpnt; /* reset command */
225 struct scsi_cmnd *pending_SCpnt[8]; /* per-device pending commands */
226 int next_pending; /* next pending device */
229 * Error recovery
231 wait_queue_head_t eh_wait;
232 struct timer_list eh_timer;
233 unsigned int rst_dev_status;
234 unsigned int rst_bus_status;
236 /* driver information */
237 struct {
238 phase_t phase; /* current phase */
239 void __iomem *io_base; /* iomem base of FAS216 */
240 unsigned int io_shift; /* shift to adjust reg offsets by */
241 unsigned char cfg[4]; /* configuration registers */
242 const char *type; /* chip type */
243 unsigned int irq; /* interrupt */
244 int dma; /* dma channel */
246 struct scsi_pointer SCp; /* current commands data pointer */
248 MsgQueue_t msgs; /* message queue for connected device */
250 unsigned int async_stp; /* Async transfer STP value */
251 unsigned char msgin_fifo; /* bytes in fifo at time of message in */
252 unsigned char message[256]; /* last message received from device */
254 unsigned char disconnectable:1; /* this command can be disconnected */
255 unsigned char aborting:1; /* aborting command */
256 } scsi;
258 /* statistics information */
259 struct {
260 unsigned int queues;
261 unsigned int removes;
262 unsigned int fins;
263 unsigned int reads;
264 unsigned int writes;
265 unsigned int miscs;
266 unsigned int disconnects;
267 unsigned int aborts;
268 unsigned int bus_resets;
269 unsigned int host_resets;
270 } stats;
272 /* configuration information */
273 struct {
274 unsigned char clockrate; /* clock rate of FAS device (MHz) */
275 unsigned char select_timeout; /* timeout (R5) */
276 unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */
277 unsigned char wide_max_size; /* Maximum wide transfer size */
278 unsigned char cntl3; /* Control Reg 3 */
279 unsigned int asyncperiod; /* Async transfer period (ns) */
280 unsigned int capabilities; /* driver capabilities */
281 unsigned int disconnect_ok:1; /* Disconnects allowed? */
282 } ifcfg;
284 /* queue handling */
285 struct {
286 Queue_t issue; /* issue queue */
287 Queue_t disconnected; /* disconnected command queue */
288 } queues;
290 /* per-device info */
291 struct fas216_device {
292 unsigned char disconnect_ok:1; /* device can disconnect */
293 unsigned char parity_enabled:1; /* parity checking enabled */
294 unsigned char parity_check:1; /* need to check parity checking */
295 unsigned char period; /* sync xfer period in (*4ns) */
296 unsigned char stp; /* synchronous transfer period */
297 unsigned char sof; /* synchronous offset register */
298 unsigned char wide_xfer; /* currently negociated wide transfer */
299 neg_t sync_state; /* synchronous transfer mode */
300 neg_t wide_state; /* wide transfer mode */
301 } device[8];
302 unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */
304 /* dma */
305 struct {
306 fasdmatype_t transfer_type; /* current type of DMA transfer */
307 fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma);
308 void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer);
309 void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp);
310 } dma;
312 /* miscellaneous */
313 int internal_done; /* flag to indicate request done */
314 unsigned long magic_end;
315 } FAS216_Info;
317 /* Function: int fas216_init (struct Scsi_Host *instance)
318 * Purpose : initialise FAS/NCR/AMD SCSI structures.
319 * Params : instance - a driver-specific filled-out structure
320 * Returns : 0 on success
322 extern int fas216_init (struct Scsi_Host *instance);
324 /* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev)
325 * Purpose : initialise FAS/NCR/AMD SCSI ic.
326 * Params : instance - a driver-specific filled-out structure
327 * Returns : 0 on success
329 extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
331 /* Function: int fas216_queue_command(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
332 * Purpose : queue a command for adapter to process.
333 * Params : SCpnt - Command to queue
334 * done - done function to call once command is complete
335 * Returns : 0 - success, else error
337 extern int fas216_queue_command(struct scsi_cmnd *,
338 void (*done)(struct scsi_cmnd *));
340 /* Function: int fas216_noqueue_command(istruct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
341 * Purpose : queue a command for adapter to process, and process it to completion.
342 * Params : SCpnt - Command to queue
343 * done - done function to call once command is complete
344 * Returns : 0 - success, else error
346 extern int fas216_noqueue_command(struct scsi_cmnd *,
347 void (*done)(struct scsi_cmnd *));
349 /* Function: irqreturn_t fas216_intr (FAS216_Info *info)
350 * Purpose : handle interrupts from the interface to progress a command
351 * Params : info - interface to service
353 extern irqreturn_t fas216_intr (FAS216_Info *info);
355 extern void fas216_remove (struct Scsi_Host *instance);
357 /* Function: void fas216_release (struct Scsi_Host *instance)
358 * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
359 * Params : instance - a driver-specific filled-out structure
360 * Returns : 0 on success
362 extern void fas216_release (struct Scsi_Host *instance);
364 extern int fas216_print_host(FAS216_Info *info, char *buffer);
365 extern int fas216_print_stats(FAS216_Info *info, char *buffer);
366 extern int fas216_print_devices(FAS216_Info *info, char *buffer);
368 /* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt)
369 * Purpose : abort this command
370 * Params : SCpnt - command to abort
371 * Returns : FAILED if unable to abort
373 extern int fas216_eh_abort(struct scsi_cmnd *SCpnt);
375 /* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
376 * Purpose : Reset the device associated with this command
377 * Params : SCpnt - command specifing device to reset
378 * Returns : FAILED if unable to reset
380 extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt);
382 /* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
383 * Purpose : Reset the complete bus associated with this command
384 * Params : SCpnt - command specifing bus to reset
385 * Returns : FAILED if unable to reset
387 extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt);
389 /* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
390 * Purpose : Reset the host associated with this command
391 * Params : SCpnt - command specifing host to reset
392 * Returns : FAILED if unable to reset
394 extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt);
396 #endif /* FAS216_H */