?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
pcmcia: CompactFlash driver for PA Semi Electra boards
[pv_ops_mirror.git] / drivers / scsi / constants.c
blob024553f9c247c669ab4769aef2ee5ef0c58c361e
1 /*
2 * ASCII values for a number of symbolic constants, printing functions,
3 * etc.
4 * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
5 * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
6 * by D. Gilbert and aeb (20020609)
7 * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025
8 * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702
9 */
10
11 #include <linux/blkdev.h>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14
15 #include <scsi/scsi.h>
16 #include <scsi/scsi_cmnd.h>
17 #include <scsi/scsi_device.h>
18 #include <scsi/scsi_host.h>
19 #include <scsi/scsi_eh.h>
20 #include <scsi/scsi_dbg.h>
21
22
23
24 /* Commands with service actions that change the command name */
25 #define MAINTENANCE_IN 0xa3
26 #define MAINTENANCE_OUT 0xa4
27 #define SERVICE_ACTION_IN_12 0xab
28 #define SERVICE_ACTION_OUT_12 0xa9
29 #define SERVICE_ACTION_IN_16 0x9e
30 #define SERVICE_ACTION_OUT_16 0x9f
31 #define VARIABLE_LENGTH_CMD 0x7f
32
33
34
35 #ifdef CONFIG_SCSI_CONSTANTS
36 static const char * cdb_byte0_names[] = {
37 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
38 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
39 "Reasssign Blocks",
40 /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
41 /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
42 /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
43 "Reserve(6)",
44 /* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
45 /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
46 /* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
47 /* 20-22 */ NULL, NULL, NULL,
48 /* 23-28 */ "Read Format Capacities", "Set Window",
49 "Read Capacity(10)", NULL, NULL, "Read(10)",
50 /* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
51 "Read updated block",
52 /* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
53 /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
54 /* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
55 "Read Defect Data(10)",
56 /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
57 "Read Buffer",
58 /* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
59 /* 40-41 */ "Change Definition", "Write Same(10)",
60 /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support",
61 "Play audio(10)", "Get configuration", "Play audio msf",
62 "Play audio track/index",
63 /* 49-4f */ "Play track relative(10)", "Get event status notification",
64 "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
65 NULL,
66 /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
67 "Reserve track", "Send OPC info", "Mode Select(10)",
68 /* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
69 "Mode Sense(10)", "Close track/session",
70 /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
71 "Persistent reserve out",
72 /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
73 /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
74 /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
75 /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length",
76 /* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
77 "Receive copy results",
78 /* 85-89 */ "ATA command pass through(16)", "Access control in",
79 "Access control out", "Read(16)", "Memory Export Out(16)",
80 /* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes",
81 "Write and verify(16)", "Verify(16)",
82 /* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
83 "Lock/unlock cache(16)", "Write same(16)", NULL,
84 /* 95-99 */ NULL, NULL, NULL, NULL, NULL,
85 /* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
86 "Service action out(16)",
87 /* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
88 "Security protocol in", "Maintenance in", "Maintenance out",
89 "Move medium/play audio(12)",
90 /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
91 "Play track relative(12)",
92 /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
93 "Read DVD structure", "Write and verify(12)",
94 /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
95 /* b2-b4 */ "Search data low(12)", "Set limits(12)",
96 "Read element status attached",
97 /* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
98 /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
99 /* ba-bc */ "Redundancy group (in), Scan",
100 "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
101 /* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
102 "Volume set (out), Send DVD structure",
103 };
104
105 struct value_name_pair {
106 int value;
107 const char * name;
108 };
109
110 static const struct value_name_pair maint_in_arr[] = {
111 {0x5, "Report device identifier"},
112 {0xa, "Report target port groups"},
113 {0xb, "Report aliases"},
114 {0xc, "Report supported operation codes"},
115 {0xd, "Report supported task management functions"},
116 {0xe, "Report priority"},
117 {0xf, "Report timestamp"},
118 };
119 #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
120
121 static const struct value_name_pair maint_out_arr[] = {
122 {0x6, "Set device identifier"},
123 {0xa, "Set target port groups"},
124 {0xb, "Change aliases"},
125 {0xe, "Set priority"},
126 {0xe, "Set timestamp"},
127 };
128 #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
129
130 static const struct value_name_pair serv_in12_arr[] = {
131 {0x1, "Read media serial number"},
132 };
133 #define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr)
134
135 static const struct value_name_pair serv_out12_arr[] = {
136 {-1, "dummy entry"},
137 };
138 #define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
139
140 static const struct value_name_pair serv_in16_arr[] = {
141 {0x10, "Read capacity(16)"},
142 {0x11, "Read long(16)"},
143 };
144 #define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
145
146 static const struct value_name_pair serv_out16_arr[] = {
147 {0x11, "Write long(16)"},
148 {0x1f, "Notify data transfer device(16)"},
149 };
150 #define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
151
152 static const struct value_name_pair variable_length_arr[] = {
153 {0x1, "Rebuild(32)"},
154 {0x2, "Regenerate(32)"},
155 {0x3, "Xdread(32)"},
156 {0x4, "Xdwrite(32)"},
157 {0x5, "Xdwrite extended(32)"},
158 {0x6, "Xpwrite(32)"},
159 {0x7, "Xdwriteread(32)"},
160 {0x8, "Xdwrite extended(64)"},
161 {0x9, "Read(32)"},
162 {0xa, "Verify(32)"},
163 {0xb, "Write(32)"},
164 {0xc, "Write an verify(32)"},
165 {0xd, "Write same(32)"},
166 {0x8801, "Format OSD"},
167 {0x8802, "Create (osd)"},
168 {0x8803, "List (osd)"},
169 {0x8805, "Read (osd)"},
170 {0x8806, "Write (osd)"},
171 {0x8807, "Append (osd)"},
172 {0x8808, "Flush (osd)"},
173 {0x880a, "Remove (osd)"},
174 {0x880b, "Create partition (osd)"},
175 {0x880c, "Remove partition (osd)"},
176 {0x880e, "Get attributes (osd)"},
177 {0x880f, "Set attributes (osd)"},
178 {0x8812, "Create and write (osd)"},
179 {0x8815, "Create collection (osd)"},
180 {0x8816, "Remove collection (osd)"},
181 {0x8817, "List collection (osd)"},
182 {0x8818, "Set key (osd)"},
183 {0x8819, "Set master key (osd)"},
184 {0x881a, "Flush collection (osd)"},
185 {0x881b, "Flush partition (osd)"},
186 {0x881c, "Flush OSD"},
187 {0x8f7e, "Perform SCSI command (osd)"},
188 {0x8f7f, "Perform task management function (osd)"},
189 };
190 #define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)
191
192 static const char * get_sa_name(const struct value_name_pair * arr,
193 int arr_sz, int service_action)
194 {
195 int k;
196
197 for (k = 0; k < arr_sz; ++k, ++arr) {
198 if (service_action == arr->value)
199 break;
200 }
201 return (k < arr_sz) ? arr->name : NULL;
202 }
203
204 /* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */
205 static void print_opcode_name(unsigned char * cdbp, int cdb_len)
206 {
207 int sa, len, cdb0;
208 const char * name;
209
210 cdb0 = cdbp[0];
211 switch(cdb0) {
212 case VARIABLE_LENGTH_CMD:
213 len = cdbp[7] + 8;
214 if (len < 10) {
215 printk("short variable length command, "
216 "len=%d ext_len=%d", len, cdb_len);
217 break;
218 }
219 sa = (cdbp[8] << 8) + cdbp[9];
220 name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
221 if (name) {
222 printk("%s", name);
223 if ((cdb_len > 0) && (len != cdb_len))
224 printk(", in_cdb_len=%d, ext_len=%d",
225 len, cdb_len);
226 } else {
227 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
228 if ((cdb_len > 0) && (len != cdb_len))
229 printk(", in_cdb_len=%d, ext_len=%d",
230 len, cdb_len);
231 }
232 break;
233 case MAINTENANCE_IN:
234 sa = cdbp[1] & 0x1f;
235 name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
236 if (name)
237 printk("%s", name);
238 else
239 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
240 break;
241 case MAINTENANCE_OUT:
242 sa = cdbp[1] & 0x1f;
243 name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
244 if (name)
245 printk("%s", name);
246 else
247 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
248 break;
249 case SERVICE_ACTION_IN_12:
250 sa = cdbp[1] & 0x1f;
251 name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
252 if (name)
253 printk("%s", name);
254 else
255 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
256 break;
257 case SERVICE_ACTION_OUT_12:
258 sa = cdbp[1] & 0x1f;
259 name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
260 if (name)
261 printk("%s", name);
262 else
263 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
264 break;
265 case SERVICE_ACTION_IN_16:
266 sa = cdbp[1] & 0x1f;
267 name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
268 if (name)
269 printk("%s", name);
270 else
271 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
272 break;
273 case SERVICE_ACTION_OUT_16:
274 sa = cdbp[1] & 0x1f;
275 name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
276 if (name)
277 printk("%s", name);
278 else
279 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
280 break;
281 default:
282 if (cdb0 < 0xc0) {
283 name = cdb_byte0_names[cdb0];
284 if (name)
285 printk("%s", name);
286 else
287 printk("cdb[0]=0x%x (reserved)", cdb0);
288 } else
289 printk("cdb[0]=0x%x (vendor)", cdb0);
290 break;
291 }
292 }
293
294 #else /* ifndef CONFIG_SCSI_CONSTANTS */
295
296 static void print_opcode_name(unsigned char * cdbp, int cdb_len)
297 {
298 int sa, len, cdb0;
299
300 cdb0 = cdbp[0];
301 switch(cdb0) {
302 case VARIABLE_LENGTH_CMD:
303 len = cdbp[7] + 8;
304 if (len < 10) {
305 printk("short opcode=0x%x command, len=%d "
306 "ext_len=%d", cdb0, len, cdb_len);
307 break;
308 }
309 sa = (cdbp[8] << 8) + cdbp[9];
310 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
311 if (len != cdb_len)
312 printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
313 break;
314 case MAINTENANCE_IN:
315 case MAINTENANCE_OUT:
316 case SERVICE_ACTION_IN_12:
317 case SERVICE_ACTION_OUT_12:
318 case SERVICE_ACTION_IN_16:
319 case SERVICE_ACTION_OUT_16:
320 sa = cdbp[1] & 0x1f;
321 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
322 break;
323 default:
324 if (cdb0 < 0xc0)
325 printk("cdb[0]=0x%x", cdb0);
326 else
327 printk("cdb[0]=0x%x (vendor)", cdb0);
328 break;
329 }
330 }
331 #endif
332
333 void __scsi_print_command(unsigned char *cdb)
334 {
335 int k, len;
336
337 print_opcode_name(cdb, 0);
338 if (VARIABLE_LENGTH_CMD == cdb[0])
339 len = cdb[7] + 8;
340 else
341 len = COMMAND_SIZE(cdb[0]);
342 /* print out all bytes in cdb */
343 for (k = 0; k < len; ++k)
344 printk(" %02x", cdb[k]);
345 printk("\n");
346 }
347 EXPORT_SYMBOL(__scsi_print_command);
348
349 void scsi_print_command(struct scsi_cmnd *cmd)
350 {
351 int k;
352
353 scmd_printk(KERN_INFO, cmd, "CDB: ");
354 print_opcode_name(cmd->cmnd, cmd->cmd_len);
355
356 /* print out all bytes in cdb */
357 printk(":");
358 for (k = 0; k < cmd->cmd_len; ++k)
359 printk(" %02x", cmd->cmnd[k]);
360 printk("\n");
361 }
362 EXPORT_SYMBOL(scsi_print_command);
363
364 /**
365 *
366 * scsi_print_status - print scsi status description
367 * @scsi_status: scsi status value
368 *
369 * If the status is recognized, the description is printed.
370 * Otherwise "Unknown status" is output. No trailing space.
371 * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex
372 * (e.g. "0x2" for Check Condition).
373 **/
374 void
375 scsi_print_status(unsigned char scsi_status) {
376 #ifdef CONFIG_SCSI_CONSTANTS
377 const char * ccp;
378
379 switch (scsi_status) {
380 case 0: ccp = "Good"; break;
381 case 0x2: ccp = "Check Condition"; break;
382 case 0x4: ccp = "Condition Met"; break;
383 case 0x8: ccp = "Busy"; break;
384 case 0x10: ccp = "Intermediate"; break;
385 case 0x14: ccp = "Intermediate-Condition Met"; break;
386 case 0x18: ccp = "Reservation Conflict"; break;
387 case 0x22: ccp = "Command Terminated"; break; /* obsolete */
388 case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */
389 case 0x30: ccp = "ACA Active"; break;
390 case 0x40: ccp = "Task Aborted"; break;
391 default: ccp = "Unknown status";
392 }
393 printk(KERN_INFO "%s", ccp);
394 #else
395 printk(KERN_INFO "0x%0x", scsi_status);
396 #endif
397 }
398 EXPORT_SYMBOL(scsi_print_status);
399
400 #ifdef CONFIG_SCSI_CONSTANTS
401
402 struct error_info {
403 unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
404 const char * text;
405 };
406
407 /*
408 * The canonical list of T10 Additional Sense Codes is available at:
409 * http://www.t10.org/lists/asc-num.txt
410 */
411 static const struct error_info additional[] =
412 {
413 {0x0000, "No additional sense information"},
414 {0x0001, "Filemark detected"},
415 {0x0002, "End-of-partition/medium detected"},
416 {0x0003, "Setmark detected"},
417 {0x0004, "Beginning-of-partition/medium detected"},
418 {0x0005, "End-of-data detected"},
419 {0x0006, "I/O process terminated"},
420 {0x0011, "Audio play operation in progress"},
421 {0x0012, "Audio play operation paused"},
422 {0x0013, "Audio play operation successfully completed"},
423 {0x0014, "Audio play operation stopped due to error"},
424 {0x0015, "No current audio status to return"},
425 {0x0016, "Operation in progress"},
426 {0x0017, "Cleaning requested"},
427 {0x0018, "Erase operation in progress"},
428 {0x0019, "Locate operation in progress"},
429 {0x001A, "Rewind operation in progress"},
430 {0x001B, "Set capacity operation in progress"},
431 {0x001C, "Verify operation in progress"},
432 {0x001D, "ATA pass through information available"},
433
434 {0x0100, "No index/sector signal"},
435
436 {0x0200, "No seek complete"},
437
438 {0x0300, "Peripheral device write fault"},
439 {0x0301, "No write current"},
440 {0x0302, "Excessive write errors"},
441
442 {0x0400, "Logical unit not ready, cause not reportable"},
443 {0x0401, "Logical unit is in process of becoming ready"},
444 {0x0402, "Logical unit not ready, initializing command required"},
445 {0x0403, "Logical unit not ready, manual intervention required"},
446 {0x0404, "Logical unit not ready, format in progress"},
447 {0x0405, "Logical unit not ready, rebuild in progress"},
448 {0x0406, "Logical unit not ready, recalculation in progress"},
449 {0x0407, "Logical unit not ready, operation in progress"},
450 {0x0408, "Logical unit not ready, long write in progress"},
451 {0x0409, "Logical unit not ready, self-test in progress"},
452 {0x040A, "Logical unit not accessible, asymmetric access state "
453 "transition"},
454 {0x040B, "Logical unit not accessible, target port in standby state"},
455 {0x040C, "Logical unit not accessible, target port in unavailable "
456 "state"},
457 {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
458 {0x0411, "Logical unit not ready, notify (enable spinup) required"},
459 {0x0412, "Logical unit not ready, offline"},
460
461 {0x0500, "Logical unit does not respond to selection"},
462
463 {0x0600, "No reference position found"},
464
465 {0x0700, "Multiple peripheral devices selected"},
466
467 {0x0800, "Logical unit communication failure"},
468 {0x0801, "Logical unit communication time-out"},
469 {0x0802, "Logical unit communication parity error"},
470 {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
471 {0x0804, "Unreachable copy target"},
472
473 {0x0900, "Track following error"},
474 {0x0901, "Tracking servo failure"},
475 {0x0902, "Focus servo failure"},
476 {0x0903, "Spindle servo failure"},
477 {0x0904, "Head select fault"},
478
479 {0x0A00, "Error log overflow"},
480
481 {0x0B00, "Warning"},
482 {0x0B01, "Warning - specified temperature exceeded"},
483 {0x0B02, "Warning - enclosure degraded"},
484 {0x0B03, "Warning - background self-test failed"},
485 {0x0B04, "Warning - background pre-scan detected medium error"},
486 {0x0B05, "Warning - background medium scan detected medium error"},
487
488 {0x0C00, "Write error"},
489 {0x0C01, "Write error - recovered with auto reallocation"},
490 {0x0C02, "Write error - auto reallocation failed"},
491 {0x0C03, "Write error - recommend reassignment"},
492 {0x0C04, "Compression check miscompare error"},
493 {0x0C05, "Data expansion occurred during compression"},
494 {0x0C06, "Block not compressible"},
495 {0x0C07, "Write error - recovery needed"},
496 {0x0C08, "Write error - recovery failed"},
497 {0x0C09, "Write error - loss of streaming"},
498 {0x0C0A, "Write error - padding blocks added"},
499 {0x0C0B, "Auxiliary memory write error"},
500 {0x0C0C, "Write error - unexpected unsolicited data"},
501 {0x0C0D, "Write error - not enough unsolicited data"},
502 {0x0C0F, "Defects in error window"},
503
504 {0x0D00, "Error detected by third party temporary initiator"},
505 {0x0D01, "Third party device failure"},
506 {0x0D02, "Copy target device not reachable"},
507 {0x0D03, "Incorrect copy target device type"},
508 {0x0D04, "Copy target device data underrun"},
509 {0x0D05, "Copy target device data overrun"},
510
511 {0x0E00, "Invalid information unit"},
512 {0x0E01, "Information unit too short"},
513 {0x0E02, "Information unit too long"},
514 {0x0E03, "Invalid field in command information unit"},
515
516 {0x1000, "Id CRC or ECC error"},
517 {0x1001, "Logical block guard check failed"},
518 {0x1002, "Logical block application tag check failed"},
519 {0x1003, "Logical block reference tag check failed"},
520
521 {0x1100, "Unrecovered read error"},
522 {0x1101, "Read retries exhausted"},
523 {0x1102, "Error too long to correct"},
524 {0x1103, "Multiple read errors"},
525 {0x1104, "Unrecovered read error - auto reallocate failed"},
526 {0x1105, "L-EC uncorrectable error"},
527 {0x1106, "CIRC unrecovered error"},
528 {0x1107, "Data re-synchronization error"},
529 {0x1108, "Incomplete block read"},
530 {0x1109, "No gap found"},
531 {0x110A, "Miscorrected error"},
532 {0x110B, "Unrecovered read error - recommend reassignment"},
533 {0x110C, "Unrecovered read error - recommend rewrite the data"},
534 {0x110D, "De-compression CRC error"},
535 {0x110E, "Cannot decompress using declared algorithm"},
536 {0x110F, "Error reading UPC/EAN number"},
537 {0x1110, "Error reading ISRC number"},
538 {0x1111, "Read error - loss of streaming"},
539 {0x1112, "Auxiliary memory read error"},
540 {0x1113, "Read error - failed retransmission request"},
541 {0x1114, "Read error - lba marked bad by application client"},
542
543 {0x1200, "Address mark not found for id field"},
544
545 {0x1300, "Address mark not found for data field"},
546
547 {0x1400, "Recorded entity not found"},
548 {0x1401, "Record not found"},
549 {0x1402, "Filemark or setmark not found"},
550 {0x1403, "End-of-data not found"},
551 {0x1404, "Block sequence error"},
552 {0x1405, "Record not found - recommend reassignment"},
553 {0x1406, "Record not found - data auto-reallocated"},
554 {0x1407, "Locate operation failure"},
555
556 {0x1500, "Random positioning error"},
557 {0x1501, "Mechanical positioning error"},
558 {0x1502, "Positioning error detected by read of medium"},
559
560 {0x1600, "Data synchronization mark error"},
561 {0x1601, "Data sync error - data rewritten"},
562 {0x1602, "Data sync error - recommend rewrite"},
563 {0x1603, "Data sync error - data auto-reallocated"},
564 {0x1604, "Data sync error - recommend reassignment"},
565
566 {0x1700, "Recovered data with no error correction applied"},
567 {0x1701, "Recovered data with retries"},
568 {0x1702, "Recovered data with positive head offset"},
569 {0x1703, "Recovered data with negative head offset"},
570 {0x1704, "Recovered data with retries and/or circ applied"},
571 {0x1705, "Recovered data using previous sector id"},
572 {0x1706, "Recovered data without ECC - data auto-reallocated"},
573 {0x1707, "Recovered data without ECC - recommend reassignment"},
574 {0x1708, "Recovered data without ECC - recommend rewrite"},
575 {0x1709, "Recovered data without ECC - data rewritten"},
576
577 {0x1800, "Recovered data with error correction applied"},
578 {0x1801, "Recovered data with error corr. & retries applied"},
579 {0x1802, "Recovered data - data auto-reallocated"},
580 {0x1803, "Recovered data with CIRC"},
581 {0x1804, "Recovered data with L-EC"},
582 {0x1805, "Recovered data - recommend reassignment"},
583 {0x1806, "Recovered data - recommend rewrite"},
584 {0x1807, "Recovered data with ECC - data rewritten"},
585 {0x1808, "Recovered data with linking"},
586
587 {0x1900, "Defect list error"},
588 {0x1901, "Defect list not available"},
589 {0x1902, "Defect list error in primary list"},
590 {0x1903, "Defect list error in grown list"},
591
592 {0x1A00, "Parameter list length error"},
593
594 {0x1B00, "Synchronous data transfer error"},
595
596 {0x1C00, "Defect list not found"},
597 {0x1C01, "Primary defect list not found"},
598 {0x1C02, "Grown defect list not found"},
599
600 {0x1D00, "Miscompare during verify operation"},
601
602 {0x1E00, "Recovered id with ECC correction"},
603
604 {0x1F00, "Partial defect list transfer"},
605
606 {0x2000, "Invalid command operation code"},
607 {0x2001, "Access denied - initiator pending-enrolled"},
608 {0x2002, "Access denied - no access rights"},
609 {0x2003, "Access denied - invalid mgmt id key"},
610 {0x2004, "Illegal command while in write capable state"},
611 {0x2005, "Obsolete"},
612 {0x2006, "Illegal command while in explicit address mode"},
613 {0x2007, "Illegal command while in implicit address mode"},
614 {0x2008, "Access denied - enrollment conflict"},
615 {0x2009, "Access denied - invalid LU identifier"},
616 {0x200A, "Access denied - invalid proxy token"},
617 {0x200B, "Access denied - ACL LUN conflict"},
618
619 {0x2100, "Logical block address out of range"},
620 {0x2101, "Invalid element address"},
621 {0x2102, "Invalid address for write"},
622 {0x2103, "Invalid write crossing layer jump"},
623
624 {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
625
626 {0x2400, "Invalid field in cdb"},
627 {0x2401, "CDB decryption error"},
628 {0x2402, "Obsolete"},
629 {0x2403, "Obsolete"},
630 {0x2404, "Security audit value frozen"},
631 {0x2405, "Security working key frozen"},
632 {0x2406, "Nonce not unique"},
633 {0x2407, "Nonce timestamp out of range"},
634
635 {0x2500, "Logical unit not supported"},
636
637 {0x2600, "Invalid field in parameter list"},
638 {0x2601, "Parameter not supported"},
639 {0x2602, "Parameter value invalid"},
640 {0x2603, "Threshold parameters not supported"},
641 {0x2604, "Invalid release of persistent reservation"},
642 {0x2605, "Data decryption error"},
643 {0x2606, "Too many target descriptors"},
644 {0x2607, "Unsupported target descriptor type code"},
645 {0x2608, "Too many segment descriptors"},
646 {0x2609, "Unsupported segment descriptor type code"},
647 {0x260A, "Unexpected inexact segment"},
648 {0x260B, "Inline data length exceeded"},
649 {0x260C, "Invalid operation for copy source or destination"},
650 {0x260D, "Copy segment granularity violation"},
651 {0x260E, "Invalid parameter while port is enabled"},
652 {0x260F, "Invalid data-out buffer integrity check value"},
653 {0x2610, "Data decryption key fail limit reached"},
654 {0x2611, "Incomplete key-associated data set"},
655 {0x2612, "Vendor specific key reference not found"},
656
657 {0x2700, "Write protected"},
658 {0x2701, "Hardware write protected"},
659 {0x2702, "Logical unit software write protected"},
660 {0x2703, "Associated write protect"},
661 {0x2704, "Persistent write protect"},
662 {0x2705, "Permanent write protect"},
663 {0x2706, "Conditional write protect"},
664
665 {0x2800, "Not ready to ready change, medium may have changed"},
666 {0x2801, "Import or export element accessed"},
667 {0x2802, "Format-layer may have changed"},
668
669 {0x2900, "Power on, reset, or bus device reset occurred"},
670 {0x2901, "Power on occurred"},
671 {0x2902, "Scsi bus reset occurred"},
672 {0x2903, "Bus device reset function occurred"},
673 {0x2904, "Device internal reset"},
674 {0x2905, "Transceiver mode changed to single-ended"},
675 {0x2906, "Transceiver mode changed to lvd"},
676 {0x2907, "I_T nexus loss occurred"},
677
678 {0x2A00, "Parameters changed"},
679 {0x2A01, "Mode parameters changed"},
680 {0x2A02, "Log parameters changed"},
681 {0x2A03, "Reservations preempted"},
682 {0x2A04, "Reservations released"},
683 {0x2A05, "Registrations preempted"},
684 {0x2A06, "Asymmetric access state changed"},
685 {0x2A07, "Implicit asymmetric access state transition failed"},
686 {0x2A08, "Priority changed"},
687 {0x2A09, "Capacity data has changed"},
688 {0x2A10, "Timestamp changed"},
689 {0x2A11, "Data encryption parameters changed by another i_t nexus"},
690 {0x2A12, "Data encryption parameters changed by vendor specific "
691 "event"},
692 {0x2A13, "Data encryption key instance counter has changed"},
693
694 {0x2B00, "Copy cannot execute since host cannot disconnect"},
695
696 {0x2C00, "Command sequence error"},
697 {0x2C01, "Too many windows specified"},
698 {0x2C02, "Invalid combination of windows specified"},
699 {0x2C03, "Current program area is not empty"},
700 {0x2C04, "Current program area is empty"},
701 {0x2C05, "Illegal power condition request"},
702 {0x2C06, "Persistent prevent conflict"},
703 {0x2C07, "Previous busy status"},
704 {0x2C08, "Previous task set full status"},
705 {0x2C09, "Previous reservation conflict status"},
706 {0x2C0A, "Partition or collection contains user objects"},
707 {0x2C0B, "Not reserved"},
708
709 {0x2D00, "Overwrite error on update in place"},
710
711 {0x2E00, "Insufficient time for operation"},
712
713 {0x2F00, "Commands cleared by another initiator"},
714 {0x2F01, "Commands cleared by power loss notification"},
715 {0x2F02, "Commands cleared by device server"},
716
717 {0x3000, "Incompatible medium installed"},
718 {0x3001, "Cannot read medium - unknown format"},
719 {0x3002, "Cannot read medium - incompatible format"},
720 {0x3003, "Cleaning cartridge installed"},
721 {0x3004, "Cannot write medium - unknown format"},
722 {0x3005, "Cannot write medium - incompatible format"},
723 {0x3006, "Cannot format medium - incompatible medium"},
724 {0x3007, "Cleaning failure"},
725 {0x3008, "Cannot write - application code mismatch"},
726 {0x3009, "Current session not fixated for append"},
727 {0x300A, "Cleaning request rejected"},
728 {0x300C, "WORM medium - overwrite attempted"},
729 {0x300D, "WORM medium - integrity check"},
730 {0x3010, "Medium not formatted"},
731
732 {0x3100, "Medium format corrupted"},
733 {0x3101, "Format command failed"},
734 {0x3102, "Zoned formatting failed due to spare linking"},
735
736 {0x3200, "No defect spare location available"},
737 {0x3201, "Defect list update failure"},
738
739 {0x3300, "Tape length error"},
740
741 {0x3400, "Enclosure failure"},
742
743 {0x3500, "Enclosure services failure"},
744 {0x3501, "Unsupported enclosure function"},
745 {0x3502, "Enclosure services unavailable"},
746 {0x3503, "Enclosure services transfer failure"},
747 {0x3504, "Enclosure services transfer refused"},
748 {0x3505, "Enclosure services checksum error"},
749
750 {0x3600, "Ribbon, ink, or toner failure"},
751
752 {0x3700, "Rounded parameter"},
753
754 {0x3800, "Event status notification"},
755 {0x3802, "Esn - power management class event"},
756 {0x3804, "Esn - media class event"},
757 {0x3806, "Esn - device busy class event"},
758
759 {0x3900, "Saving parameters not supported"},
760
761 {0x3A00, "Medium not present"},
762 {0x3A01, "Medium not present - tray closed"},
763 {0x3A02, "Medium not present - tray open"},
764 {0x3A03, "Medium not present - loadable"},
765 {0x3A04, "Medium not present - medium auxiliary memory accessible"},
766
767 {0x3B00, "Sequential positioning error"},
768 {0x3B01, "Tape position error at beginning-of-medium"},
769 {0x3B02, "Tape position error at end-of-medium"},
770 {0x3B03, "Tape or electronic vertical forms unit not ready"},
771 {0x3B04, "Slew failure"},
772 {0x3B05, "Paper jam"},
773 {0x3B06, "Failed to sense top-of-form"},
774 {0x3B07, "Failed to sense bottom-of-form"},
775 {0x3B08, "Reposition error"},
776 {0x3B09, "Read past end of medium"},
777 {0x3B0A, "Read past beginning of medium"},
778 {0x3B0B, "Position past end of medium"},
779 {0x3B0C, "Position past beginning of medium"},
780 {0x3B0D, "Medium destination element full"},
781 {0x3B0E, "Medium source element empty"},
782 {0x3B0F, "End of medium reached"},
783 {0x3B11, "Medium magazine not accessible"},
784 {0x3B12, "Medium magazine removed"},
785 {0x3B13, "Medium magazine inserted"},
786 {0x3B14, "Medium magazine locked"},
787 {0x3B15, "Medium magazine unlocked"},
788 {0x3B16, "Mechanical positioning or changer error"},
789 {0x3B17, "Read past end of user object"},
790
791 {0x3D00, "Invalid bits in identify message"},
792
793 {0x3E00, "Logical unit has not self-configured yet"},
794 {0x3E01, "Logical unit failure"},
795 {0x3E02, "Timeout on logical unit"},
796 {0x3E03, "Logical unit failed self-test"},
797 {0x3E04, "Logical unit unable to update self-test log"},
798
799 {0x3F00, "Target operating conditions have changed"},
800 {0x3F01, "Microcode has been changed"},
801 {0x3F02, "Changed operating definition"},
802 {0x3F03, "Inquiry data has changed"},
803 {0x3F04, "Component device attached"},
804 {0x3F05, "Device identifier changed"},
805 {0x3F06, "Redundancy group created or modified"},
806 {0x3F07, "Redundancy group deleted"},
807 {0x3F08, "Spare created or modified"},
808 {0x3F09, "Spare deleted"},
809 {0x3F0A, "Volume set created or modified"},
810 {0x3F0B, "Volume set deleted"},
811 {0x3F0C, "Volume set deassigned"},
812 {0x3F0D, "Volume set reassigned"},
813 {0x3F0E, "Reported luns data has changed"},
814 {0x3F0F, "Echo buffer overwritten"},
815 {0x3F10, "Medium loadable"},
816 {0x3F11, "Medium auxiliary memory accessible"},
817 {0x3F12, "iSCSI IP address added"},
818 {0x3F13, "iSCSI IP address removed"},
819 {0x3F14, "iSCSI IP address changed"},
820 /*
821 * {0x40NN, "Ram failure"},
822 * {0x40NN, "Diagnostic failure on component nn"},
823 * {0x41NN, "Data path failure"},
824 * {0x42NN, "Power-on or self-test failure"},
825 */
826 {0x4300, "Message error"},
827
828 {0x4400, "Internal target failure"},
829 {0x4471, "ATA device failed set features"},
830
831 {0x4500, "Select or reselect failure"},
832
833 {0x4600, "Unsuccessful soft reset"},
834
835 {0x4700, "Scsi parity error"},
836 {0x4701, "Data phase CRC error detected"},
837 {0x4702, "Scsi parity error detected during st data phase"},
838 {0x4703, "Information unit iuCRC error detected"},
839 {0x4704, "Asynchronous information protection error detected"},
840 {0x4705, "Protocol service CRC error"},
841 {0x4706, "Phy test function in progress"},
842 {0x477f, "Some commands cleared by iSCSI Protocol event"},
843
844 {0x4800, "Initiator detected error message received"},
845
846 {0x4900, "Invalid message error"},
847
848 {0x4A00, "Command phase error"},
849
850 {0x4B00, "Data phase error"},
851 {0x4B01, "Invalid target port transfer tag received"},
852 {0x4B02, "Too much write data"},
853 {0x4B03, "Ack/nak timeout"},
854 {0x4B04, "Nak received"},
855 {0x4B05, "Data offset error"},
856 {0x4B06, "Initiator response timeout"},
857
858 {0x4C00, "Logical unit failed self-configuration"},
859 /*
860 * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
861 */
862 {0x4E00, "Overlapped commands attempted"},
863
864 {0x5000, "Write append error"},
865 {0x5001, "Write append position error"},
866 {0x5002, "Position error related to timing"},
867
868 {0x5100, "Erase failure"},
869 {0x5101, "Erase failure - incomplete erase operation detected"},
870
871 {0x5200, "Cartridge fault"},
872
873 {0x5300, "Media load or eject failed"},
874 {0x5301, "Unload tape failure"},
875 {0x5302, "Medium removal prevented"},
876 {0x5303, "Medium removal prevented by data transfer element"},
877 {0x5304, "Medium thread or unthread failure"},
878
879 {0x5400, "Scsi to host system interface failure"},
880
881 {0x5500, "System resource failure"},
882 {0x5501, "System buffer full"},
883 {0x5502, "Insufficient reservation resources"},
884 {0x5503, "Insufficient resources"},
885 {0x5504, "Insufficient registration resources"},
886 {0x5505, "Insufficient access control resources"},
887 {0x5506, "Auxiliary memory out of space"},
888 {0x5507, "Quota error"},
889 {0x5508, "Maximum number of supplemental decryption keys exceeded"},
890
891 {0x5700, "Unable to recover table-of-contents"},
892
893 {0x5800, "Generation does not exist"},
894
895 {0x5900, "Updated block read"},
896
897 {0x5A00, "Operator request or state change input"},
898 {0x5A01, "Operator medium removal request"},
899 {0x5A02, "Operator selected write protect"},
900 {0x5A03, "Operator selected write permit"},
901
902 {0x5B00, "Log exception"},
903 {0x5B01, "Threshold condition met"},
904 {0x5B02, "Log counter at maximum"},
905 {0x5B03, "Log list codes exhausted"},
906
907 {0x5C00, "Rpl status change"},
908 {0x5C01, "Spindles synchronized"},
909 {0x5C02, "Spindles not synchronized"},
910
911 {0x5D00, "Failure prediction threshold exceeded"},
912 {0x5D01, "Media failure prediction threshold exceeded"},
913 {0x5D02, "Logical unit failure prediction threshold exceeded"},
914 {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
915 {0x5D10, "Hardware impending failure general hard drive failure"},
916 {0x5D11, "Hardware impending failure drive error rate too high"},
917 {0x5D12, "Hardware impending failure data error rate too high"},
918 {0x5D13, "Hardware impending failure seek error rate too high"},
919 {0x5D14, "Hardware impending failure too many block reassigns"},
920 {0x5D15, "Hardware impending failure access times too high"},
921 {0x5D16, "Hardware impending failure start unit times too high"},
922 {0x5D17, "Hardware impending failure channel parametrics"},
923 {0x5D18, "Hardware impending failure controller detected"},
924 {0x5D19, "Hardware impending failure throughput performance"},
925 {0x5D1A, "Hardware impending failure seek time performance"},
926 {0x5D1B, "Hardware impending failure spin-up retry count"},
927 {0x5D1C, "Hardware impending failure drive calibration retry count"},
928 {0x5D20, "Controller impending failure general hard drive failure"},
929 {0x5D21, "Controller impending failure drive error rate too high"},
930 {0x5D22, "Controller impending failure data error rate too high"},
931 {0x5D23, "Controller impending failure seek error rate too high"},
932 {0x5D24, "Controller impending failure too many block reassigns"},
933 {0x5D25, "Controller impending failure access times too high"},
934 {0x5D26, "Controller impending failure start unit times too high"},
935 {0x5D27, "Controller impending failure channel parametrics"},
936 {0x5D28, "Controller impending failure controller detected"},
937 {0x5D29, "Controller impending failure throughput performance"},
938 {0x5D2A, "Controller impending failure seek time performance"},
939 {0x5D2B, "Controller impending failure spin-up retry count"},
940 {0x5D2C, "Controller impending failure drive calibration retry count"},
941 {0x5D30, "Data channel impending failure general hard drive failure"},
942 {0x5D31, "Data channel impending failure drive error rate too high"},
943 {0x5D32, "Data channel impending failure data error rate too high"},
944 {0x5D33, "Data channel impending failure seek error rate too high"},
945 {0x5D34, "Data channel impending failure too many block reassigns"},
946 {0x5D35, "Data channel impending failure access times too high"},
947 {0x5D36, "Data channel impending failure start unit times too high"},
948 {0x5D37, "Data channel impending failure channel parametrics"},
949 {0x5D38, "Data channel impending failure controller detected"},
950 {0x5D39, "Data channel impending failure throughput performance"},
951 {0x5D3A, "Data channel impending failure seek time performance"},
952 {0x5D3B, "Data channel impending failure spin-up retry count"},
953 {0x5D3C, "Data channel impending failure drive calibration retry "
954 "count"},
955 {0x5D40, "Servo impending failure general hard drive failure"},
956 {0x5D41, "Servo impending failure drive error rate too high"},
957 {0x5D42, "Servo impending failure data error rate too high"},
958 {0x5D43, "Servo impending failure seek error rate too high"},
959 {0x5D44, "Servo impending failure too many block reassigns"},
960 {0x5D45, "Servo impending failure access times too high"},
961 {0x5D46, "Servo impending failure start unit times too high"},
962 {0x5D47, "Servo impending failure channel parametrics"},
963 {0x5D48, "Servo impending failure controller detected"},
964 {0x5D49, "Servo impending failure throughput performance"},
965 {0x5D4A, "Servo impending failure seek time performance"},
966 {0x5D4B, "Servo impending failure spin-up retry count"},
967 {0x5D4C, "Servo impending failure drive calibration retry count"},
968 {0x5D50, "Spindle impending failure general hard drive failure"},
969 {0x5D51, "Spindle impending failure drive error rate too high"},
970 {0x5D52, "Spindle impending failure data error rate too high"},
971 {0x5D53, "Spindle impending failure seek error rate too high"},
972 {0x5D54, "Spindle impending failure too many block reassigns"},
973 {0x5D55, "Spindle impending failure access times too high"},
974 {0x5D56, "Spindle impending failure start unit times too high"},
975 {0x5D57, "Spindle impending failure channel parametrics"},
976 {0x5D58, "Spindle impending failure controller detected"},
977 {0x5D59, "Spindle impending failure throughput performance"},
978 {0x5D5A, "Spindle impending failure seek time performance"},
979 {0x5D5B, "Spindle impending failure spin-up retry count"},
980 {0x5D5C, "Spindle impending failure drive calibration retry count"},
981 {0x5D60, "Firmware impending failure general hard drive failure"},
982 {0x5D61, "Firmware impending failure drive error rate too high"},
983 {0x5D62, "Firmware impending failure data error rate too high"},
984 {0x5D63, "Firmware impending failure seek error rate too high"},
985 {0x5D64, "Firmware impending failure too many block reassigns"},
986 {0x5D65, "Firmware impending failure access times too high"},
987 {0x5D66, "Firmware impending failure start unit times too high"},
988 {0x5D67, "Firmware impending failure channel parametrics"},
989 {0x5D68, "Firmware impending failure controller detected"},
990 {0x5D69, "Firmware impending failure throughput performance"},
991 {0x5D6A, "Firmware impending failure seek time performance"},
992 {0x5D6B, "Firmware impending failure spin-up retry count"},
993 {0x5D6C, "Firmware impending failure drive calibration retry count"},
994 {0x5DFF, "Failure prediction threshold exceeded (false)"},
995
996 {0x5E00, "Low power condition on"},
997 {0x5E01, "Idle condition activated by timer"},
998 {0x5E02, "Standby condition activated by timer"},
999 {0x5E03, "Idle condition activated by command"},
1000 {0x5E04, "Standby condition activated by command"},
1001 {0x5E41, "Power state change to active"},
1002 {0x5E42, "Power state change to idle"},
1003 {0x5E43, "Power state change to standby"},
1004 {0x5E45, "Power state change to sleep"},
1005 {0x5E47, "Power state change to device control"},
1006
1007 {0x6000, "Lamp failure"},
1008
1009 {0x6100, "Video acquisition error"},
1010 {0x6101, "Unable to acquire video"},
1011 {0x6102, "Out of focus"},
1012
1013 {0x6200, "Scan head positioning error"},
1014
1015 {0x6300, "End of user area encountered on this track"},
1016 {0x6301, "Packet does not fit in available space"},
1017
1018 {0x6400, "Illegal mode for this track"},
1019 {0x6401, "Invalid packet size"},
1020
1021 {0x6500, "Voltage fault"},
1022
1023 {0x6600, "Automatic document feeder cover up"},
1024 {0x6601, "Automatic document feeder lift up"},
1025 {0x6602, "Document jam in automatic document feeder"},
1026 {0x6603, "Document miss feed automatic in document feeder"},
1027
1028 {0x6700, "Configuration failure"},
1029 {0x6701, "Configuration of incapable logical units failed"},
1030 {0x6702, "Add logical unit failed"},
1031 {0x6703, "Modification of logical unit failed"},
1032 {0x6704, "Exchange of logical unit failed"},
1033 {0x6705, "Remove of logical unit failed"},
1034 {0x6706, "Attachment of logical unit failed"},
1035 {0x6707, "Creation of logical unit failed"},
1036 {0x6708, "Assign failure occurred"},
1037 {0x6709, "Multiply assigned logical unit"},
1038 {0x670A, "Set target port groups command failed"},
1039 {0x670B, "ATA device feature not enabled"},
1040
1041 {0x6800, "Logical unit not configured"},
1042
1043 {0x6900, "Data loss on logical unit"},
1044 {0x6901, "Multiple logical unit failures"},
1045 {0x6902, "Parity/data mismatch"},
1046
1047 {0x6A00, "Informational, refer to log"},
1048
1049 {0x6B00, "State change has occurred"},
1050 {0x6B01, "Redundancy level got better"},
1051 {0x6B02, "Redundancy level got worse"},
1052
1053 {0x6C00, "Rebuild failure occurred"},
1054
1055 {0x6D00, "Recalculate failure occurred"},
1056
1057 {0x6E00, "Command to logical unit failed"},
1058
1059 {0x6F00, "Copy protection key exchange failure - authentication "
1060 "failure"},
1061 {0x6F01, "Copy protection key exchange failure - key not present"},
1062 {0x6F02, "Copy protection key exchange failure - key not established"},
1063 {0x6F03, "Read of scrambled sector without authentication"},
1064 {0x6F04, "Media region code is mismatched to logical unit region"},
1065 {0x6F05, "Drive region must be permanent/region reset count error"},
1066 {0x6F06, "Insufficient block count for binding nonce recording"},
1067 {0x6F07, "Conflict in binding nonce recording"},
1068 /*
1069 * {0x70NN, "Decompression exception short algorithm id of nn"},
1070 */
1071 {0x7100, "Decompression exception long algorithm id"},
1072
1073 {0x7200, "Session fixation error"},
1074 {0x7201, "Session fixation error writing lead-in"},
1075 {0x7202, "Session fixation error writing lead-out"},
1076 {0x7203, "Session fixation error - incomplete track in session"},
1077 {0x7204, "Empty or partially written reserved track"},
1078 {0x7205, "No more track reservations allowed"},
1079 {0x7206, "RMZ extension is not allowed"},
1080 {0x7207, "No more test zone extensions are allowed"},
1081
1082 {0x7300, "Cd control error"},
1083 {0x7301, "Power calibration area almost full"},
1084 {0x7302, "Power calibration area is full"},
1085 {0x7303, "Power calibration area error"},
1086 {0x7304, "Program memory area update failure"},
1087 {0x7305, "Program memory area is full"},
1088 {0x7306, "RMA/PMA is almost full"},
1089 {0x7310, "Current power calibration area almost full"},
1090 {0x7311, "Current power calibration area is full"},
1091 {0x7317, "RDZ is full"},
1092
1093 {0x7400, "Security error"},
1094 {0x7401, "Unable to decrypt data"},
1095 {0x7402, "Unencrypted data encountered while decrypting"},
1096 {0x7403, "Incorrect data encryption key"},
1097 {0x7404, "Cryptographic integrity validation failed"},
1098 {0x7405, "Error decrypting data"},
1099 {0x7471, "Logical unit access not authorized"},
1100
1101 {0, NULL}
1102 };
1103
1104 struct error_info2 {
1105 unsigned char code1, code2_min, code2_max;
1106 const char * fmt;
1107 };
1108
1109 static const struct error_info2 additional2[] =
1110 {
1111 {0x40,0x00,0x7f,"Ram failure (%x)"},
1112 {0x40,0x80,0xff,"Diagnostic failure on component (%x)"},
1113 {0x41,0x00,0xff,"Data path failure (%x)"},
1114 {0x42,0x00,0xff,"Power-on or self-test failure (%x)"},
1115 {0x4D,0x00,0xff,"Tagged overlapped commands (queue tag %x)"},
1116 {0x70,0x00,0xff,"Decompression exception short algorithm id of %x"},
1117 {0, 0, 0, NULL}
1118 };
1119
1120 /* description of the sense key values */
1121 static const char * const snstext[] = {
1122 "No Sense", /* 0: There is no sense information */
1123 "Recovered Error", /* 1: The last command completed successfully
1124 but used error correction */
1125 "Not Ready", /* 2: The addressed target is not ready */
1126 "Medium Error", /* 3: Data error detected on the medium */
1127 "Hardware Error", /* 4: Controller or device failure */
1128 "Illegal Request", /* 5: Error in request */
1129 "Unit Attention", /* 6: Removable medium was changed, or
1130 the target has been reset, or ... */
1131 "Data Protect", /* 7: Access to the data is blocked */
1132 "Blank Check", /* 8: Reached unexpected written or unwritten
1133 region of the medium */
1134 "Vendor Specific(9)",
1135 "Copy Aborted", /* A: COPY or COMPARE was aborted */
1136 "Aborted Command", /* B: The target aborted the command */
1137 "Equal", /* C: A SEARCH DATA command found data equal */
1138 "Volume Overflow", /* D: Medium full with still data to be written */
1139 "Miscompare", /* E: Source data and data on the medium
1140 do not agree */
1141 };
1142 #endif
1143
1144 /* Get sense key string or NULL if not available */
1145 const char *
1146 scsi_sense_key_string(unsigned char key) {
1147 #ifdef CONFIG_SCSI_CONSTANTS
1148 if (key <= 0xE)
1149 return snstext[key];
1150 #endif
1151 return NULL;
1152 }
1153 EXPORT_SYMBOL(scsi_sense_key_string);
1154
1155 /*
1156 * Get additional sense code string or NULL if not available.
1157 * This string may contain a "%x" and should be printed with ascq as arg.
1158 */
1159 const char *
1160 scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
1161 #ifdef CONFIG_SCSI_CONSTANTS
1162 int i;
1163 unsigned short code = ((asc << 8) | ascq);
1164
1165 for (i=0; additional[i].text; i++)
1166 if (additional[i].code12 == code)
1167 return additional[i].text;
1168 for (i=0; additional2[i].fmt; i++)
1169 if (additional2[i].code1 == asc &&
1170 additional2[i].code2_min >= ascq &&
1171 additional2[i].code2_max <= ascq)
1172 return additional2[i].fmt;
1173 #endif
1174 return NULL;
1175 }
1176 EXPORT_SYMBOL(scsi_extd_sense_format);
1177
1178 void
1179 scsi_show_extd_sense(unsigned char asc, unsigned char ascq)
1180 {
1181 const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
1182
1183 if (extd_sense_fmt) {
1184 if (strstr(extd_sense_fmt, "%x")) {
1185 printk("Add. Sense: ");
1186 printk(extd_sense_fmt, ascq);
1187 } else
1188 printk("Add. Sense: %s", extd_sense_fmt);
1189 } else {
1190 if (asc >= 0x80)
1191 printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc,
1192 ascq);
1193 if (ascq >= 0x80)
1194 printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc,
1195 ascq);
1196 else
1197 printk("ASC=0x%x ASCQ=0x%x", asc, ascq);
1198 }
1199
1200 printk("\n");
1201 }
1202 EXPORT_SYMBOL(scsi_show_extd_sense);
1203
1204 void
1205 scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr)
1206 {
1207 const char *sense_txt;
1208
1209 sense_txt = scsi_sense_key_string(sshdr->sense_key);
1210 if (sense_txt)
1211 printk("Sense Key : %s ", sense_txt);
1212 else
1213 printk("Sense Key : 0x%x ", sshdr->sense_key);
1214
1215 printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " :
1216 "[current] ");
1217
1218 if (sshdr->response_code >= 0x72)
1219 printk("[descriptor]");
1220
1221 printk("\n");
1222 }
1223 EXPORT_SYMBOL(scsi_show_sense_hdr);
1224
1225 /*
1226 * Print normalized SCSI sense header with a prefix.
1227 */
1228 void
1229 scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
1230 {
1231 printk(KERN_INFO "%s: ", name);
1232 scsi_show_sense_hdr(sshdr);
1233 printk(KERN_INFO "%s: ", name);
1234 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
1235 }
1236 EXPORT_SYMBOL(scsi_print_sense_hdr);
1237
1238 /*
1239 * Print normalized SCSI sense header with device information and a prefix.
1240 */
1241 void
1242 scsi_cmd_print_sense_hdr(struct scsi_cmnd *scmd, const char *desc,
1243 struct scsi_sense_hdr *sshdr)
1244 {
1245 scmd_printk(KERN_INFO, scmd, "%s: ", desc);
1246 scsi_show_sense_hdr(sshdr);
1247 scmd_printk(KERN_INFO, scmd, "%s: ", desc);
1248 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
1249 }
1250 EXPORT_SYMBOL(scsi_cmd_print_sense_hdr);
1251
1252 static void
1253 scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len,
1254 struct scsi_sense_hdr *sshdr)
1255 {
1256 int k, num, res;
1257
1258 res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
1259 if (0 == res) {
1260 /* this may be SCSI-1 sense data */
1261 num = (sense_len < 32) ? sense_len : 32;
1262 printk("Unrecognized sense data (in hex):");
1263 for (k = 0; k < num; ++k) {
1264 if (0 == (k % 16)) {
1265 printk("\n");
1266 printk(KERN_INFO " ");
1267 }
1268 printk("%02x ", sense_buffer[k]);
1269 }
1270 printk("\n");
1271 return;
1272 }
1273 }
1274
1275 static void
1276 scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len,
1277 struct scsi_sense_hdr *sshdr)
1278 {
1279 int k, num, res;
1280
1281 if (sshdr->response_code < 0x72)
1282 {
1283 /* only decode extras for "fixed" format now */
1284 char buff[80];
1285 int blen, fixed_valid;
1286 unsigned int info;
1287
1288 fixed_valid = sense_buffer[0] & 0x80;
1289 info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) |
1290 (sense_buffer[5] << 8) | sense_buffer[6]);
1291 res = 0;
1292 memset(buff, 0, sizeof(buff));
1293 blen = sizeof(buff) - 1;
1294 if (fixed_valid)
1295 res += snprintf(buff + res, blen - res,
1296 "Info fld=0x%x", info);
1297 if (sense_buffer[2] & 0x80) {
1298 /* current command has read a filemark */
1299 if (res > 0)
1300 res += snprintf(buff + res, blen - res, ", ");
1301 res += snprintf(buff + res, blen - res, "FMK");
1302 }
1303 if (sense_buffer[2] & 0x40) {
1304 /* end-of-medium condition exists */
1305 if (res > 0)
1306 res += snprintf(buff + res, blen - res, ", ");
1307 res += snprintf(buff + res, blen - res, "EOM");
1308 }
1309 if (sense_buffer[2] & 0x20) {
1310 /* incorrect block length requested */
1311 if (res > 0)
1312 res += snprintf(buff + res, blen - res, ", ");
1313 res += snprintf(buff + res, blen - res, "ILI");
1314 }
1315 if (res > 0)
1316 printk("%s\n", buff);
1317 } else if (sshdr->additional_length > 0) {
1318 /* descriptor format with sense descriptors */
1319 num = 8 + sshdr->additional_length;
1320 num = (sense_len < num) ? sense_len : num;
1321 printk("Descriptor sense data with sense descriptors "
1322 "(in hex):");
1323 for (k = 0; k < num; ++k) {
1324 if (0 == (k % 16)) {
1325 printk("\n");
1326 printk(KERN_INFO " ");
1327 }
1328 printk("%02x ", sense_buffer[k]);
1329 }
1330
1331 printk("\n");
1332 }
1333
1334 }
1335
1336 /* Normalize and print sense buffer with name prefix */
1337 void __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
1338 int sense_len)
1339 {
1340 struct scsi_sense_hdr sshdr;
1341
1342 printk(KERN_INFO "%s: ", name);
1343 scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr);
1344 scsi_show_sense_hdr(&sshdr);
1345 scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr);
1346 printk(KERN_INFO "%s: ", name);
1347 scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
1348 }
1349 EXPORT_SYMBOL(__scsi_print_sense);
1350
1351 /* Normalize and print sense buffer in SCSI command */
1352 void scsi_print_sense(char *name, struct scsi_cmnd *cmd)
1353 {
1354 struct scsi_sense_hdr sshdr;
1355
1356 scmd_printk(KERN_INFO, cmd, "");
1357 scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
1358 &sshdr);
1359 scsi_show_sense_hdr(&sshdr);
1360 scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
1361 &sshdr);
1362 scmd_printk(KERN_INFO, cmd, "");
1363 scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
1364 }
1365 EXPORT_SYMBOL(scsi_print_sense);
1366
1367 #ifdef CONFIG_SCSI_CONSTANTS
1368
1369 static const char * const hostbyte_table[]={
1370 "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
1371 "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
1372 "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY"};
1373 #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)
1374
1375 static const char * const driverbyte_table[]={
1376 "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR",
1377 "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
1378 #define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table)
1379
1380 static const char * const driversuggest_table[]={"SUGGEST_OK",
1381 "SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE",
1382 "SUGGEST_5", "SUGGEST_6", "SUGGEST_7", "SUGGEST_SENSE"};
1383 #define NUM_SUGGEST_STRS ARRAY_SIZE(driversuggest_table)
1384
1385 void scsi_show_result(int result)
1386 {
1387 int hb = host_byte(result);
1388 int db = (driver_byte(result) & DRIVER_MASK);
1389 int su = ((driver_byte(result) & SUGGEST_MASK) >> 4);
1390
1391 printk("Result: hostbyte=%s driverbyte=%s,%s\n",
1392 (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"),
1393 (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"),
1394 (su < NUM_SUGGEST_STRS ? driversuggest_table[su] : "invalid"));
1395 }
1396
1397 #else
1398
1399 void scsi_show_result(int result)
1400 {
1401 printk("Result: hostbyte=0x%02x driverbyte=0x%02x\n",
1402 host_byte(result), driver_byte(result));
1403 }
1404
1405 #endif
1406 EXPORT_SYMBOL(scsi_show_result);
1407
1408
1409 void scsi_print_result(struct scsi_cmnd *cmd)
1410 {
1411 scmd_printk(KERN_INFO, cmd, "");
1412 scsi_show_result(cmd->result);
1413 }
1414 EXPORT_SYMBOL(scsi_print_result);
1415
1416
Mirror for ia64_pv_ops.git