drivers/usb/storage/scsiglue.c

   1 /* Driver for USB Mass Storage compliant devices
   2  * SCSI layer glue code
   3  *
   4  * $Id: scsiglue.c,v 1.26 2002/04/22 03:39:43 mdharm Exp $
   5  *
   6  * Current development and maintenance by:
   7  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   8  *
   9  * Developed with the assistance of:
  10  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
  11  *   (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
  12  *
  13  * Initial work by:
  14  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
  15  *
  16  * This driver is based on the 'USB Mass Storage Class' document. This
  17  * describes in detail the protocol used to communicate with such
  18  * devices.  Clearly, the designers had SCSI and ATAPI commands in
  19  * mind when they created this document.  The commands are all very
  20  * similar to commands in the SCSI-II and ATAPI specifications.
  21  *
  22  * It is important to note that in a number of cases this class
  23  * exhibits class-specific exemptions from the USB specification.
  24  * Notably the usage of NAK, STALL and ACK differs from the norm, in
  25  * that they are used to communicate wait, failed and OK on commands.
  26  *
  27  * Also, for certain devices, the interrupt endpoint is used to convey
  28  * status of a command.
  29  *
  30  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  31  * information about this driver.
  32  *
  33  * This program is free software; you can redistribute it and/or modify it
  34  * under the terms of the GNU General Public License as published by the
  35  * Free Software Foundation; either version 2, or (at your option) any
  36  * later version.
  37  *
  38  * This program is distributed in the hope that it will be useful, but
  39  * WITHOUT ANY WARRANTY; without even the implied warranty of
  40  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  41  * General Public License for more details.
  42  *
  43  * You should have received a copy of the GNU General Public License along
  44  * with this program; if not, write to the Free Software Foundation, Inc.,
  45  * 675 Mass Ave, Cambridge, MA 02139, USA.
  46  */
  47
  48 #include <linux/slab.h>
  49 #include <linux/module.h>
  50 #include <linux/mutex.h>
  51
  52 #include <scsi/scsi.h>
  53 #include <scsi/scsi_cmnd.h>
  54 #include <scsi/scsi_devinfo.h>
  55 #include <scsi/scsi_device.h>
  56 #include <scsi/scsi_eh.h>
  57
  58 #include "usb.h"
  59 #include "scsiglue.h"
  60 #include "debug.h"
  61 #include "transport.h"
  62 #include "protocol.h"
  63
  64 /***********************************************************************
  65  * Host functions
  66  ***********************************************************************/
  67
  68 static const char* host_info(struct Scsi_Host *host)
  69 {
  70         return "SCSI emulation for USB Mass Storage devices";
  71 }
  72
  73 static int slave_alloc (struct scsi_device *sdev)
  74 {
  75         struct us_data *us = host_to_us(sdev->host);
  76
  77         /*
  78          * Set the INQUIRY transfer length to 36.  We don't use any of
  79          * the extra data and many devices choke if asked for more or
  80          * less than 36 bytes.
  81          */
  82         sdev->inquiry_len = 36;
  83
  84         /*
  85          * The UFI spec treates the Peripheral Qualifier bits in an
  86          * INQUIRY result as reserved and requires devices to set them
  87          * to 0.  However the SCSI spec requires these bits to be set
  88          * to 3 to indicate when a LUN is not present.
  89          *
  90          * Let the scanning code know if this target merely sets
  91          * Peripheral Device Type to 0x1f to indicate no LUN.
  92          */
  93         if (us->subclass == US_SC_UFI)
  94                 sdev->sdev_target->pdt_1f_for_no_lun = 1;
  95
  96         return 0;
  97 }
  98
  99 static int slave_configure(struct scsi_device *sdev)
 100 {
 101         struct us_data *us = host_to_us(sdev->host);
 102
 103         /* Scatter-gather buffers (all but the last) must have a length
 104          * divisible by the bulk maxpacket size.  Otherwise a data packet
 105          * would end up being short, causing a premature end to the data
 106          * transfer.  Since high-speed bulk pipes have a maxpacket size
 107          * of 512, we'll use that as the scsi device queue's DMA alignment
 108          * mask.  Guaranteeing proper alignment of the first buffer will
 109          * have the desired effect because, except at the beginning and
 110          * the end, scatter-gather buffers follow page boundaries. */
 111         blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
 112
 113         /* Many devices have trouble transfering more than 32KB at a time,
 114          * while others have trouble with more than 64K. At this time we
 115          * are limiting both to 32K (64 sectores).
 116          */
 117         if ((us->flags & US_FL_MAX_SECTORS_64) &&
 118                         sdev->request_queue->max_sectors > 64)
 119                 blk_queue_max_sectors(sdev->request_queue, 64);
 120
 121         /* We can't put these settings in slave_alloc() because that gets
 122          * called before the device type is known.  Consequently these
 123          * settings can't be overridden via the scsi devinfo mechanism. */
 124         if (sdev->type == TYPE_DISK) {
 125
 126                 /* Disk-type devices use MODE SENSE(6) if the protocol
 127                  * (SubClass) is Transparent SCSI, otherwise they use
 128                  * MODE SENSE(10). */
 129                 if (us->subclass != US_SC_SCSI)
 130                         sdev->use_10_for_ms = 1;
 131
 132                 /* Many disks only accept MODE SENSE transfer lengths of
 133                  * 192 bytes (that's what Windows uses). */
 134                 sdev->use_192_bytes_for_3f = 1;
 135
 136                 /* Some devices don't like MODE SENSE with page=0x3f,
 137                  * which is the command used for checking if a device
 138                  * is write-protected.  Now that we tell the sd driver
 139                  * to do a 192-byte transfer with this command the
 140                  * majority of devices work fine, but a few still can't
 141                  * handle it.  The sd driver will simply assume those
 142                  * devices are write-enabled. */
 143                 if (us->flags & US_FL_NO_WP_DETECT)
 144                         sdev->skip_ms_page_3f = 1;
 145
 146                 /* A number of devices have problems with MODE SENSE for
 147                  * page x08, so we will skip it. */
 148                 sdev->skip_ms_page_8 = 1;
 149
 150                 /* Some disks return the total number of blocks in response
 151                  * to READ CAPACITY rather than the highest block number.
 152                  * If this device makes that mistake, tell the sd driver. */
 153                 if (us->flags & US_FL_FIX_CAPACITY)
 154                         sdev->fix_capacity = 1;
 155
 156                 /* A few disks have two indistinguishable version, one of
 157                  * which reports the correct capacity and the other does not.
 158                  * The sd driver has to guess which is the case. */
 159                 if (us->flags & US_FL_CAPACITY_HEURISTICS)
 160                         sdev->guess_capacity = 1;
 161
 162                 /* Some devices report a SCSI revision level above 2 but are
 163                  * unable to handle the REPORT LUNS command (for which
 164                  * support is mandatory at level 3).  Since we already have
 165                  * a Get-Max-LUN request, we won't lose much by setting the
 166                  * revision level down to 2.  The only devices that would be
 167                  * affected are those with sparse LUNs. */
 168                 if (sdev->scsi_level > SCSI_2)
 169                         sdev->sdev_target->scsi_level =
 170                                         sdev->scsi_level = SCSI_2;
 171
 172                 /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
 173                  * Hardware Error) when any low-level error occurs,
 174                  * recoverable or not.  Setting this flag tells the SCSI
 175                  * midlayer to retry such commands, which frequently will
 176                  * succeed and fix the error.  The worst this can lead to
 177                  * is an occasional series of retries that will all fail. */
 178                 sdev->retry_hwerror = 1;
 179
 180         } else {
 181
 182                 /* Non-disk-type devices don't need to blacklist any pages
 183                  * or to force 192-byte transfer lengths for MODE SENSE.
 184                  * But they do need to use MODE SENSE(10). */
 185                 sdev->use_10_for_ms = 1;
 186         }
 187
 188         /* The CB and CBI transports have no way to pass LUN values
 189          * other than the bits in the second byte of a CDB.  But those
 190          * bits don't get set to the LUN value if the device reports
 191          * scsi_level == 0 (UNKNOWN).  Hence such devices must necessarily
 192          * be single-LUN.
 193          */
 194         if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
 195                         sdev->scsi_level == SCSI_UNKNOWN)
 196                 us->max_lun = 0;
 197
 198         /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
 199          * REMOVAL command, so suppress those commands. */
 200         if (us->flags & US_FL_NOT_LOCKABLE)
 201                 sdev->lockable = 0;
 202
 203         /* this is to satisfy the compiler, tho I don't think the
 204          * return code is ever checked anywhere. */
 205         return 0;
 206 }
 207
 208 /* queue a command */
 209 /* This is always called with scsi_lock(host) held */
 210 static int queuecommand(struct scsi_cmnd *srb,
 211                         void (*done)(struct scsi_cmnd *))
 212 {
 213         struct us_data *us = host_to_us(srb->device->host);
 214
 215         US_DEBUGP("%s called\n", __FUNCTION__);
 216
 217         /* check for state-transition errors */
 218         if (us->srb != NULL) {
 219                 printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
 220                         __FUNCTION__, us->srb);
 221                 return SCSI_MLQUEUE_HOST_BUSY;
 222         }
 223
 224         /* fail the command if we are disconnecting */
 225         if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
 226                 US_DEBUGP("Fail command during disconnect\n");
 227                 srb->result = DID_NO_CONNECT << 16;
 228                 done(srb);
 229                 return 0;
 230         }
 231
 232         /* enqueue the command and wake up the control thread */
 233         srb->scsi_done = done;
 234         us->srb = srb;
 235         up(&(us->sema));
 236
 237         return 0;
 238 }
 239
 240 /***********************************************************************
 241  * Error handling functions
 242  ***********************************************************************/
 243
 244 /* Command timeout and abort */
 245 static int command_abort(struct scsi_cmnd *srb)
 246 {
 247         struct us_data *us = host_to_us(srb->device->host);
 248
 249         US_DEBUGP("%s called\n", __FUNCTION__);
 250
 251         /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
 252          * bits are protected by the host lock. */
 253         scsi_lock(us_to_host(us));
 254
 255         /* Is this command still active? */
 256         if (us->srb != srb) {
 257                 scsi_unlock(us_to_host(us));
 258                 US_DEBUGP ("-- nothing to abort\n");
 259                 return FAILED;
 260         }
 261
 262         /* Set the TIMED_OUT bit.  Also set the ABORTING bit, but only if
 263          * a device reset isn't already in progress (to avoid interfering
 264          * with the reset).  Note that we must retain the host lock while
 265          * calling usb_stor_stop_transport(); otherwise it might interfere
 266          * with an auto-reset that begins as soon as we release the lock. */
 267         set_bit(US_FLIDX_TIMED_OUT, &us->flags);
 268         if (!test_bit(US_FLIDX_RESETTING, &us->flags)) {
 269                 set_bit(US_FLIDX_ABORTING, &us->flags);
 270                 usb_stor_stop_transport(us);
 271         }
 272         scsi_unlock(us_to_host(us));
 273
 274         /* Wait for the aborted command to finish */
 275         wait_for_completion(&us->notify);
 276         return SUCCESS;
 277 }
 278
 279 /* This invokes the transport reset mechanism to reset the state of the
 280  * device */
 281 static int device_reset(struct scsi_cmnd *srb)
 282 {
 283         struct us_data *us = host_to_us(srb->device->host);
 284         int result;
 285
 286         US_DEBUGP("%s called\n", __FUNCTION__);
 287
 288         /* lock the device pointers and do the reset */
 289         mutex_lock(&(us->dev_mutex));
 290         result = us->transport_reset(us);
 291         mutex_unlock(&us->dev_mutex);
 292
 293         return result < 0 ? FAILED : SUCCESS;
 294 }
 295
 296 /* Simulate a SCSI bus reset by resetting the device's USB port. */
 297 static int bus_reset(struct scsi_cmnd *srb)
 298 {
 299         struct us_data *us = host_to_us(srb->device->host);
 300         int result;
 301
 302         US_DEBUGP("%s called\n", __FUNCTION__);
 303         result = usb_stor_port_reset(us);
 304         return result < 0 ? FAILED : SUCCESS;
 305 }
 306
 307 /* Report a driver-initiated device reset to the SCSI layer.
 308  * Calling this for a SCSI-initiated reset is unnecessary but harmless.
 309  * The caller must own the SCSI host lock. */
 310 void usb_stor_report_device_reset(struct us_data *us)
 311 {
 312         int i;
 313         struct Scsi_Host *host = us_to_host(us);
 314
 315         scsi_report_device_reset(host, 0, 0);
 316         if (us->flags & US_FL_SCM_MULT_TARG) {
 317                 for (i = 1; i < host->max_id; ++i)
 318                         scsi_report_device_reset(host, 0, i);
 319         }
 320 }
 321
 322 /* Report a driver-initiated bus reset to the SCSI layer.
 323  * Calling this for a SCSI-initiated reset is unnecessary but harmless.
 324  * The caller must not own the SCSI host lock. */
 325 void usb_stor_report_bus_reset(struct us_data *us)
 326 {
 327         struct Scsi_Host *host = us_to_host(us);
 328
 329         scsi_lock(host);
 330         scsi_report_bus_reset(host, 0);
 331         scsi_unlock(host);
 332 }
 333
 334 /***********************************************************************
 335  * /proc/scsi/ functions
 336  ***********************************************************************/
 337
 338 /* we use this macro to help us write into the buffer */
 339 #undef SPRINTF
 340 #define SPRINTF(args...) \
 341         do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
 342
 343 static int proc_info (struct Scsi_Host *host, char *buffer,
 344                 char **start, off_t offset, int length, int inout)
 345 {
 346         struct us_data *us = host_to_us(host);
 347         char *pos = buffer;
 348         const char *string;
 349
 350         /* if someone is sending us data, just throw it away */
 351         if (inout)
 352                 return length;
 353
 354         /* print the controller name */
 355         SPRINTF("   Host scsi%d: usb-storage\n", host->host_no);
 356
 357         /* print product, vendor, and serial number strings */
 358         if (us->pusb_dev->manufacturer)
 359                 string = us->pusb_dev->manufacturer;
 360         else if (us->unusual_dev->vendorName)
 361                 string = us->unusual_dev->vendorName;
 362         else
 363                 string = "Unknown";
 364         SPRINTF("       Vendor: %s\n", string);
 365         if (us->pusb_dev->product)
 366                 string = us->pusb_dev->product;
 367         else if (us->unusual_dev->productName)
 368                 string = us->unusual_dev->productName;
 369         else
 370                 string = "Unknown";
 371         SPRINTF("      Product: %s\n", string);
 372         if (us->pusb_dev->serial)
 373                 string = us->pusb_dev->serial;
 374         else
 375                 string = "None";
 376         SPRINTF("Serial Number: %s\n", string);
 377
 378         /* show the protocol and transport */
 379         SPRINTF("     Protocol: %s\n", us->protocol_name);
 380         SPRINTF("    Transport: %s\n", us->transport_name);
 381
 382         /* show the device flags */
 383         if (pos < buffer + length) {
 384                 pos += sprintf(pos, "       Quirks:");
 385
 386 #define US_FLAG(name, value) \
 387         if (us->flags & value) pos += sprintf(pos, " " #name);
 388 US_DO_ALL_FLAGS
 389 #undef US_FLAG
 390
 391                 *(pos++) = '\n';
 392         }
 393
 394         /*
 395          * Calculate start of next buffer, and return value.
 396          */
 397         *start = buffer + offset;
 398
 399         if ((pos - buffer) < offset)
 400                 return (0);
 401         else if ((pos - buffer - offset) < length)
 402                 return (pos - buffer - offset);
 403         else
 404                 return (length);
 405 }
 406
 407 /***********************************************************************
 408  * Sysfs interface
 409  ***********************************************************************/
 410
 411 /* Output routine for the sysfs max_sectors file */
 412 static ssize_t show_max_sectors(struct device *dev, struct device_attribute *attr, char *buf)
 413 {
 414         struct scsi_device *sdev = to_scsi_device(dev);
 415
 416         return sprintf(buf, "%u\n", sdev->request_queue->max_sectors);
 417 }
 418
 419 /* Input routine for the sysfs max_sectors file */
 420 static ssize_t store_max_sectors(struct device *dev, struct device_attribute *attr, const char *buf,
 421                 size_t count)
 422 {
 423         struct scsi_device *sdev = to_scsi_device(dev);
 424         unsigned short ms;
 425
 426         if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) {
 427                 blk_queue_max_sectors(sdev->request_queue, ms);
 428                 return strlen(buf);
 429         }
 430         return -EINVAL;
 431 }
 432
 433 static DEVICE_ATTR(max_sectors, S_IRUGO | S_IWUSR, show_max_sectors,
 434                 store_max_sectors);
 435
 436 static struct device_attribute *sysfs_device_attr_list[] = {
 437                 &dev_attr_max_sectors,
 438                 NULL,
 439                 };
 440
 441 /*
 442  * this defines our host template, with which we'll allocate hosts
 443  */
 444
 445 struct scsi_host_template usb_stor_host_template = {
 446         /* basic userland interface stuff */
 447         .name =                         "usb-storage",
 448         .proc_name =                    "usb-storage",
 449         .proc_info =                    proc_info,
 450         .info =                         host_info,
 451
 452         /* command interface -- queued only */
 453         .queuecommand =                 queuecommand,
 454
 455         /* error and abort handlers */
 456         .eh_abort_handler =             command_abort,
 457         .eh_device_reset_handler =      device_reset,
 458         .eh_bus_reset_handler =         bus_reset,
 459
 460         /* queue commands only, only one command per LUN */
 461         .can_queue =                    1,
 462         .cmd_per_lun =                  1,
 463
 464         /* unknown initiator id */
 465         .this_id =                      -1,
 466
 467         .slave_alloc =                  slave_alloc,
 468         .slave_configure =              slave_configure,
 469
 470         /* lots of sg segments can be handled */
 471         .sg_tablesize =                 SG_ALL,
 472
 473         /* limit the total size of a transfer to 120 KB */
 474         .max_sectors =                  240,
 475
 476         /* merge commands... this seems to help performance, but
 477          * periodically someone should test to see which setting is more
 478          * optimal.
 479          */
 480         .use_clustering =               1,
 481
 482         /* emulated HBA */
 483         .emulated =                     1,
 484
 485         /* we do our own delay after a device or bus reset */
 486         .skip_settle_delay =            1,
 487
 488         /* sysfs device attributes */
 489         .sdev_attrs =                   sysfs_device_attr_list,
 490
 491         /* module management */
 492         .module =                       THIS_MODULE
 493 };
 494
 495 /* To Report "Illegal Request: Invalid Field in CDB */
 496 unsigned char usb_stor_sense_invalidCDB[18] = {
 497         [0]     = 0x70,                     /* current error */
 498         [2]     = ILLEGAL_REQUEST,          /* Illegal Request = 0x05 */
 499         [7]     = 0x0a,                     /* additional length */
 500         [12]    = 0x24                      /* Invalid Field in CDB */
 501 };
 502