| blob | dec99455321fdf86018ca5b2b62936103fd73031 |
1 ------------------------------------------------------------------------------
2 T H E /proc F I L E S Y S T E M
3 ------------------------------------------------------------------------------
4 /proc/sys Terrehon Bowden <terrehon@pacbell.net> October 7 1999
5 Bodo Bauer <bb@ricochet.net>
7 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
8 ------------------------------------------------------------------------------
9 Version 1.3 Kernel version 2.2.12
10 Kernel version 2.4.0-test11-pre4
11 ------------------------------------------------------------------------------
13 Table of Contents
14 -----------------
16 0 Preface
17 0.1 Introduction/Credits
18 0.2 Legal Stuff
20 1 Collecting System Information
21 1.1 Process-Specific Subdirectories
22 1.2 Kernel data
23 1.3 IDE devices in /proc/ide
24 1.4 Networking info in /proc/net
25 1.5 SCSI info
26 1.6 Parallel port info in /proc/parport
27 1.7 TTY info in /proc/tty
28 1.8 Miscellaneous kernel statistics in /proc/stat
30 2 Modifying System Parameters
31 2.1 /proc/sys/fs - File system data
32 2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
33 2.3 /proc/sys/kernel - general kernel parameters
34 2.4 /proc/sys/vm - The virtual memory subsystem
35 2.5 /proc/sys/dev - Device specific parameters
36 2.6 /proc/sys/sunrpc - Remote procedure calls
37 2.7 /proc/sys/net - Networking stuff
38 2.8 /proc/sys/net/ipv4 - IPV4 settings
39 2.9 Appletalk
40 2.10 IPX
41 2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
42 2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score
43 2.13 /proc/<pid>/oom_score - Display current oom-killer score
44 2.14 /proc/<pid>/io - Display the IO accounting fields
45 2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
47 ------------------------------------------------------------------------------
48 Preface
49 ------------------------------------------------------------------------------
51 0.1 Introduction/Credits
52 ------------------------
54 This documentation is part of a soon (or so we hope) to be released book on
55 the SuSE Linux distribution. As there is no complete documentation for the
56 /proc file system and we've used many freely available sources to write these
57 chapters, it seems only fair to give the work back to the Linux community.
58 This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm
59 afraid it's still far from complete, but we hope it will be useful. As far as
60 we know, it is the first 'all-in-one' document about the /proc file system. It
61 is focused on the Intel x86 hardware, so if you are looking for PPC, ARM,
62 SPARC, AXP, etc., features, you probably won't find what you are looking for.
63 It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But
64 additions and patches are welcome and will be added to this document if you
65 mail them to Bodo.
67 We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of
68 other people for help compiling this documentation. We'd also like to extend a
69 special thank you to Andi Kleen for documentation, which we relied on heavily
70 to create this document, as well as the additional information he provided.
71 Thanks to everybody else who contributed source or docs to the Linux kernel
72 and helped create a great piece of software... :)
74 If you have any comments, corrections or additions, please don't hesitate to
75 contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
76 document.
78 The latest version of this document is available online at
79 http://skaro.nightcrawler.com/~bb/Docs/Proc as HTML version.
81 If the above direction does not works for you, ypu could try the kernel
82 mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
83 comandante@zaralinux.com.
85 0.2 Legal Stuff
86 ---------------
88 We don't guarantee the correctness of this document, and if you come to us
89 complaining about how you screwed up your system because of incorrect
90 documentation, we won't feel responsible...
92 ------------------------------------------------------------------------------
93 CHAPTER 1: COLLECTING SYSTEM INFORMATION
94 ------------------------------------------------------------------------------
96 ------------------------------------------------------------------------------
97 In This Chapter
98 ------------------------------------------------------------------------------
99 * Investigating the properties of the pseudo file system /proc and its
100 ability to provide information on the running Linux system
101 * Examining /proc's structure
102 * Uncovering various information about the kernel and the processes running
103 on the system
104 ------------------------------------------------------------------------------
107 The proc file system acts as an interface to internal data structures in the
108 kernel. It can be used to obtain information about the system and to change
109 certain kernel parameters at runtime (sysctl).
111 First, we'll take a look at the read-only parts of /proc. In Chapter 2, we
112 show you how you can use /proc/sys to change settings.
114 1.1 Process-Specific Subdirectories
115 -----------------------------------
117 The directory /proc contains (among other things) one subdirectory for each
118 process running on the system, which is named after the process ID (PID).
120 The link self points to the process reading the file system. Each process
121 subdirectory has the entries listed in Table 1-1.
124 Table 1-1: Process specific entries in /proc
125 ..............................................................................
126 File Content
127 clear_refs Clears page referenced bits shown in smaps output
128 cmdline Command line arguments
129 cpu Current and last cpu in which it was executed (2.4)(smp)
130 cwd Link to the current working directory
131 environ Values of environment variables
132 exe Link to the executable of this process
133 fd Directory, which contains all file descriptors
134 maps Memory maps to executables and library files (2.4)
135 mem Memory held by this process
136 root Link to the root directory of this process
137 stat Process status
138 statm Process memory status information
139 status Process status in human readable form
140 wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
141 smaps Extension based on maps, the rss size for each mapped file
142 ..............................................................................
144 For example, to get the status information of a process, all you have to do is
145 read the file /proc/PID/status:
147 >cat /proc/self/status
148 Name: cat
149 State: R (running)
150 Pid: 5452
151 PPid: 743
152 TracerPid: 0 (2.4)
153 Uid: 501 501 501 501
154 Gid: 100 100 100 100
155 Groups: 100 14 16
156 VmSize: 1112 kB
157 VmLck: 0 kB
158 VmRSS: 348 kB
159 VmData: 24 kB
160 VmStk: 12 kB
161 VmExe: 8 kB
162 VmLib: 1044 kB
163 SigPnd: 0000000000000000
164 SigBlk: 0000000000000000
165 SigIgn: 0000000000000000
166 SigCgt: 0000000000000000
167 CapInh: 00000000fffffeff
168 CapPrm: 0000000000000000
169 CapEff: 0000000000000000
172 This shows you nearly the same information you would get if you viewed it with
173 the ps command. In fact, ps uses the proc file system to obtain its
174 information. The statm file contains more detailed information about the
175 process memory usage. Its seven fields are explained in Table 1-2. The stat
176 file contains details information about the process itself. Its fields are
177 explained in Table 1-3.
180 Table 1-2: Contents of the statm files (as of 2.6.8-rc3)
181 ..............................................................................
182 Field Content
183 size total program size (pages) (same as VmSize in status)
184 resident size of memory portions (pages) (same as VmRSS in status)
185 shared number of pages that are shared (i.e. backed by a file)
186 trs number of pages that are 'code' (not including libs; broken,
187 includes data segment)
188 lrs number of pages of library (always 0 on 2.6)
189 drs number of pages of data/stack (including libs; broken,
190 includes library text)
191 dt number of dirty pages (always 0 on 2.6)
192 ..............................................................................
195 Table 1-3: Contents of the stat files (as of 2.6.22-rc3)
196 ..............................................................................
197 Field Content
198 pid process id
199 tcomm filename of the executable
200 state state (R is running, S is sleeping, D is sleeping in an
201 uninterruptible wait, Z is zombie, T is traced or stopped)
202 ppid process id of the parent process
203 pgrp pgrp of the process
204 sid session id
205 tty_nr tty the process uses
206 tty_pgrp pgrp of the tty
207 flags task flags
208 min_flt number of minor faults
209 cmin_flt number of minor faults with child's
210 maj_flt number of major faults
211 cmaj_flt number of major faults with child's
212 utime user mode jiffies
213 stime kernel mode jiffies
214 cutime user mode jiffies with child's
215 cstime kernel mode jiffies with child's
216 priority priority level
217 nice nice level
218 num_threads number of threads
219 start_time time the process started after system boot
220 vsize virtual memory size
221 rss resident set memory size
222 rsslim current limit in bytes on the rss
223 start_code address above which program text can run
224 end_code address below which program text can run
225 start_stack address of the start of the stack
226 esp current value of ESP
227 eip current value of EIP
228 pending bitmap of pending signals (obsolete)
229 blocked bitmap of blocked signals (obsolete)
230 sigign bitmap of ignored signals (obsolete)
231 sigcatch bitmap of catched signals (obsolete)
232 wchan address where process went to sleep
233 0 (place holder)
234 0 (place holder)
235 exit_signal signal to send to parent thread on exit
236 task_cpu which CPU the task is scheduled on
237 rt_priority realtime priority
238 policy scheduling policy (man sched_setscheduler)
239 blkio_ticks time spent waiting for block IO
240 ..............................................................................
243 1.2 Kernel data
244 ---------------
246 Similar to the process entries, the kernel data files give information about
247 the running kernel. The files used to obtain this information are contained in
248 /proc and are listed in Table 1-4. Not all of these will be present in your
249 system. It depends on the kernel configuration and the loaded modules, which
250 files are there, and which are missing.
252 Table 1-4: Kernel info in /proc
253 ..............................................................................
254 File Content
255 apm Advanced power management info
256 buddyinfo Kernel memory allocator information (see text) (2.5)
257 bus Directory containing bus specific information
258 cmdline Kernel command line
259 cpuinfo Info about the CPU
260 devices Available devices (block and character)
261 dma Used DMS channels
262 filesystems Supported filesystems
263 driver Various drivers grouped here, currently rtc (2.4)
264 execdomains Execdomains, related to security (2.4)
265 fb Frame Buffer devices (2.4)
266 fs File system parameters, currently nfs/exports (2.4)
267 ide Directory containing info about the IDE subsystem
268 interrupts Interrupt usage
269 iomem Memory map (2.4)
270 ioports I/O port usage
271 irq Masks for irq to cpu affinity (2.4)(smp?)
272 isapnp ISA PnP (Plug&Play) Info (2.4)
273 kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4))
274 kmsg Kernel messages
275 ksyms Kernel symbol table
276 loadavg Load average of last 1, 5 & 15 minutes
277 locks Kernel locks
278 meminfo Memory info
279 misc Miscellaneous
280 modules List of loaded modules
281 mounts Mounted filesystems
282 net Networking info (see text)
283 partitions Table of partitions known to the system
284 pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
285 decoupled by lspci (2.4)
286 rtc Real time clock
287 scsi SCSI info (see text)
288 slabinfo Slab pool info
289 stat Overall statistics
290 swaps Swap space utilization
291 sys See chapter 2
292 sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
293 tty Info of tty drivers
294 uptime System uptime
295 version Kernel version
296 video bttv info of video resources (2.4)
297 ..............................................................................
299 You can, for example, check which interrupts are currently in use and what
300 they are used for by looking in the file /proc/interrupts:
302 > cat /proc/interrupts
303 CPU0
304 0: 8728810 XT-PIC timer
305 1: 895 XT-PIC keyboard
306 2: 0 XT-PIC cascade
307 3: 531695 XT-PIC aha152x
308 4: 2014133 XT-PIC serial
309 5: 44401 XT-PIC pcnet_cs
310 8: 2 XT-PIC rtc
311 11: 8 XT-PIC i82365
312 12: 182918 XT-PIC PS/2 Mouse
313 13: 1 XT-PIC fpu
314 14: 1232265 XT-PIC ide0
315 15: 7 XT-PIC ide1
316 NMI: 0
318 In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the
319 output of a SMP machine):
321 > cat /proc/interrupts
323 CPU0 CPU1
324 0: 1243498 1214548 IO-APIC-edge timer
325 1: 8949 8958 IO-APIC-edge keyboard
326 2: 0 0 XT-PIC cascade
327 5: 11286 10161 IO-APIC-edge soundblaster
328 8: 1 0 IO-APIC-edge rtc
329 9: 27422 27407 IO-APIC-edge 3c503
330 12: 113645 113873 IO-APIC-edge PS/2 Mouse
331 13: 0 0 XT-PIC fpu
332 14: 22491 24012 IO-APIC-edge ide0
333 15: 2183 2415 IO-APIC-edge ide1
334 17: 30564 30414 IO-APIC-level eth0
335 18: 177 164 IO-APIC-level bttv
336 NMI: 2457961 2457959
337 LOC: 2457882 2457881
338 ERR: 2155
340 NMI is incremented in this case because every timer interrupt generates a NMI
341 (Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups.
343 LOC is the local interrupt counter of the internal APIC of every CPU.
345 ERR is incremented in the case of errors in the IO-APIC bus (the bus that
346 connects the CPUs in a SMP system. This means that an error has been detected,
347 the IO-APIC automatically retry the transmission, so it should not be a big
348 problem, but you should read the SMP-FAQ.
350 In 2.6.2* /proc/interrupts was expanded again. This time the goal was for
351 /proc/interrupts to display every IRQ vector in use by the system, not
352 just those considered 'most important'. The new vectors are:
354 THR -- interrupt raised when a machine check threshold counter
355 (typically counting ECC corrected errors of memory or cache) exceeds
356 a configurable threshold. Only available on some systems.
358 TRM -- a thermal event interrupt occurs when a temperature threshold
359 has been exceeded for the CPU. This interrupt may also be generated
360 when the temperature drops back to normal.
362 SPU -- a spurious interrupt is some interrupt that was raised then lowered
363 by some IO device before it could be fully processed by the APIC. Hence
364 the APIC sees the interrupt but does not know what device it came from.
365 For this case the APIC will generate the interrupt with a IRQ vector
366 of 0xff. This might also be generated by chipset bugs.
368 RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
369 sent from one CPU to another per the needs of the OS. Typically,
370 their statistics are used by kernel developers and interested users to
371 determine the occurance of interrupt of the given type.
373 The above IRQ vectors are displayed only when relevent. For example,
374 the threshold vector does not exist on x86_64 platforms. Others are
375 suppressed when the system is a uniprocessor. As of this writing, only
376 i386 and x86_64 platforms support the new IRQ vector displays.
378 Of some interest is the introduction of the /proc/irq directory to 2.4.
379 It could be used to set IRQ to CPU affinity, this means that you can "hook" an
380 IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the
381 irq subdir is one subdir for each IRQ, and one file; prof_cpu_mask
383 For example
384 > ls /proc/irq/
385 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask
386 1 11 13 15 17 19 3 5 7 9
387 > ls /proc/irq/0/
388 smp_affinity
390 The contents of the prof_cpu_mask file and each smp_affinity file for each IRQ
391 is the same by default:
393 > cat /proc/irq/0/smp_affinity
394 ffffffff
396 It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can
397 set it by doing:
399 > echo 1 > /proc/irq/prof_cpu_mask
401 This means that only the first CPU will handle the IRQ, but you can also echo 5
402 which means that only the first and fourth CPU can handle the IRQ.
404 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
405 between all the CPUs which are allowed to handle it. As usual the kernel has
406 more info than you and does a better job than you, so the defaults are the
407 best choice for almost everyone.
409 There are three more important subdirectories in /proc: net, scsi, and sys.
410 The general rule is that the contents, or even the existence of these
411 directories, depend on your kernel configuration. If SCSI is not enabled, the
412 directory scsi may not exist. The same is true with the net, which is there
413 only when networking support is present in the running kernel.
415 The slabinfo file gives information about memory usage at the slab level.
416 Linux uses slab pools for memory management above page level in version 2.2.
417 Commonly used objects have their own slab pool (such as network buffers,
418 directory cache, and so on).
420 ..............................................................................
422 > cat /proc/buddyinfo
424 Node 0, zone DMA 0 4 5 4 4 3 ...
425 Node 0, zone Normal 1 0 0 1 101 8 ...
426 Node 0, zone HighMem 2 0 0 1 1 0 ...
428 Memory fragmentation is a problem under some workloads, and buddyinfo is a
429 useful tool for helping diagnose these problems. Buddyinfo will give you a
430 clue as to how big an area you can safely allocate, or why a previous
431 allocation failed.
433 Each column represents the number of pages of a certain order which are
434 available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
435 ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
436 available in ZONE_NORMAL, etc...
438 ..............................................................................
440 meminfo:
442 Provides information about distribution and utilization of memory. This
443 varies by architecture and compile options. The following is from a
444 16GB PIII, which has highmem enabled. You may not have all of these fields.
446 > cat /proc/meminfo
449 MemTotal: 16344972 kB
450 MemFree: 13634064 kB
451 Buffers: 3656 kB
452 Cached: 1195708 kB
453 SwapCached: 0 kB
454 Active: 891636 kB
455 Inactive: 1077224 kB
456 HighTotal: 15597528 kB
457 HighFree: 13629632 kB
458 LowTotal: 747444 kB
459 LowFree: 4432 kB
460 SwapTotal: 0 kB
461 SwapFree: 0 kB
462 Dirty: 968 kB
463 Writeback: 0 kB
464 Mapped: 280372 kB
465 Slab: 684068 kB
466 CommitLimit: 7669796 kB
467 Committed_AS: 100056 kB
468 PageTables: 24448 kB
469 VmallocTotal: 112216 kB
470 VmallocUsed: 428 kB
471 VmallocChunk: 111088 kB
473 MemTotal: Total usable ram (i.e. physical ram minus a few reserved
474 bits and the kernel binary code)
475 MemFree: The sum of LowFree+HighFree
476 Buffers: Relatively temporary storage for raw disk blocks
477 shouldn't get tremendously large (20MB or so)
478 Cached: in-memory cache for files read from the disk (the
479 pagecache). Doesn't include SwapCached
480 SwapCached: Memory that once was swapped out, is swapped back in but
481 still also is in the swapfile (if memory is needed it
482 doesn't need to be swapped out AGAIN because it is already
483 in the swapfile. This saves I/O)
484 Active: Memory that has been used more recently and usually not
485 reclaimed unless absolutely necessary.
486 Inactive: Memory which has been less recently used. It is more
487 eligible to be reclaimed for other purposes
488 HighTotal:
489 HighFree: Highmem is all memory above ~860MB of physical memory
490 Highmem areas are for use by userspace programs, or
491 for the pagecache. The kernel must use tricks to access
492 this memory, making it slower to access than lowmem.
493 LowTotal:
494 LowFree: Lowmem is memory which can be used for everything that
495 highmem can be used for, but it is also available for the
496 kernel's use for its own data structures. Among many
497 other things, it is where everything from the Slab is
498 allocated. Bad things happen when you're out of lowmem.
499 SwapTotal: total amount of swap space available
500 SwapFree: Memory which has been evicted from RAM, and is temporarily
501 on the disk
502 Dirty: Memory which is waiting to get written back to the disk
503 Writeback: Memory which is actively being written back to the disk
504 Mapped: files which have been mmaped, such as libraries
505 Slab: in-kernel data structures cache
506 CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
507 this is the total amount of memory currently available to
508 be allocated on the system. This limit is only adhered to
509 if strict overcommit accounting is enabled (mode 2 in
510 'vm.overcommit_memory').
511 The CommitLimit is calculated with the following formula:
512 CommitLimit = ('vm.overcommit_ratio' * Physical RAM) + Swap
513 For example, on a system with 1G of physical RAM and 7G
514 of swap with a `vm.overcommit_ratio` of 30 it would
515 yield a CommitLimit of 7.3G.
516 For more details, see the memory overcommit documentation
517 in vm/overcommit-accounting.
518 Committed_AS: The amount of memory presently allocated on the system.
519 The committed memory is a sum of all of the memory which
520 has been allocated by processes, even if it has not been
521 "used" by them as of yet. A process which malloc()'s 1G
522 of memory, but only touches 300M of it will only show up
523 as using 300M of memory even if it has the address space
524 allocated for the entire 1G. This 1G is memory which has
525 been "committed" to by the VM and can be used at any time
526 by the allocating application. With strict overcommit
527 enabled on the system (mode 2 in 'vm.overcommit_memory'),
528 allocations which would exceed the CommitLimit (detailed
529 above) will not be permitted. This is useful if one needs
530 to guarantee that processes will not fail due to lack of
531 memory once that memory has been successfully allocated.
532 PageTables: amount of memory dedicated to the lowest level of page
533 tables.
534 VmallocTotal: total size of vmalloc memory area
535 VmallocUsed: amount of vmalloc area which is used
536 VmallocChunk: largest contigious block of vmalloc area which is free
539 1.3 IDE devices in /proc/ide
540 ----------------------------
542 The subdirectory /proc/ide contains information about all IDE devices of which
543 the kernel is aware. There is one subdirectory for each IDE controller, the
544 file drivers and a link for each IDE device, pointing to the device directory
545 in the controller specific subtree.
547 The file drivers contains general information about the drivers used for the
548 IDE devices:
550 > cat /proc/ide/drivers
551 ide-cdrom version 4.53
552 ide-disk version 1.08
554 More detailed information can be found in the controller specific
555 subdirectories. These are named ide0, ide1 and so on. Each of these
556 directories contains the files shown in table 1-5.
559 Table 1-5: IDE controller info in /proc/ide/ide?
560 ..............................................................................
561 File Content
562 channel IDE channel (0 or 1)
563 config Configuration (only for PCI/IDE bridge)
564 mate Mate name
565 model Type/Chipset of IDE controller
566 ..............................................................................
568 Each device connected to a controller has a separate subdirectory in the
569 controllers directory. The files listed in table 1-6 are contained in these
570 directories.
573 Table 1-6: IDE device information
574 ..............................................................................
575 File Content
576 cache The cache
577 capacity Capacity of the medium (in 512Byte blocks)
578 driver driver and version
579 geometry physical and logical geometry
580 identify device identify block
581 media media type
582 model device identifier
583 settings device setup
584 smart_thresholds IDE disk management thresholds
585 smart_values IDE disk management values
586 ..............................................................................
588 The most interesting file is settings. This file contains a nice overview of
589 the drive parameters:
591 # cat /proc/ide/ide0/hda/settings
592 name value min max mode
593 ---- ----- --- --- ----
594 bios_cyl 526 0 65535 rw
595 bios_head 255 0 255 rw
596 bios_sect 63 0 63 rw
597 breada_readahead 4 0 127 rw
598 bswap 0 0 1 r
599 file_readahead 72 0 2097151 rw
600 io_32bit 0 0 3 rw
601 keepsettings 0 0 1 rw
602 max_kb_per_request 122 1 127 rw
603 multcount 0 0 8 rw
604 nice1 1 0 1 rw
605 nowerr 0 0 1 rw
606 pio_mode write-only 0 255 w
607 slow 0 0 1 rw
608 unmaskirq 0 0 1 rw
609 using_dma 0 0 1 rw
612 1.4 Networking info in /proc/net
613 --------------------------------
615 The subdirectory /proc/net follows the usual pattern. Table 1-6 shows the
616 additional values you get for IP version 6 if you configure the kernel to
617 support this. Table 1-7 lists the files and their meaning.
620 Table 1-6: IPv6 info in /proc/net
621 ..............................................................................
622 File Content
623 udp6 UDP sockets (IPv6)
624 tcp6 TCP sockets (IPv6)
625 raw6 Raw device statistics (IPv6)
626 igmp6 IP multicast addresses, which this host joined (IPv6)
627 if_inet6 List of IPv6 interface addresses
628 ipv6_route Kernel routing table for IPv6
629 rt6_stats Global IPv6 routing tables statistics
630 sockstat6 Socket statistics (IPv6)
631 snmp6 Snmp data (IPv6)
632 ..............................................................................
635 Table 1-7: Network info in /proc/net
636 ..............................................................................
637 File Content
638 arp Kernel ARP table
639 dev network devices with statistics
640 dev_mcast the Layer2 multicast groups a device is listening too
641 (interface index, label, number of references, number of bound
642 addresses).
643 dev_stat network device status
644 ip_fwchains Firewall chain linkage
645 ip_fwnames Firewall chain names
646 ip_masq Directory containing the masquerading tables
647 ip_masquerade Major masquerading table
648 netstat Network statistics
649 raw raw device statistics
650 route Kernel routing table
651 rpc Directory containing rpc info
652 rt_cache Routing cache
653 snmp SNMP data
654 sockstat Socket statistics
655 tcp TCP sockets
656 tr_rif Token ring RIF routing table
657 udp UDP sockets
658 unix UNIX domain sockets
659 wireless Wireless interface data (Wavelan etc)
660 igmp IP multicast addresses, which this host joined
661 psched Global packet scheduler parameters.
662 netlink List of PF_NETLINK sockets
663 ip_mr_vifs List of multicast virtual interfaces
664 ip_mr_cache List of multicast routing cache
665 ..............................................................................
667 You can use this information to see which network devices are available in
668 your system and how much traffic was routed over those devices:
670 > cat /proc/net/dev
671 Inter-|Receive |[...
672 face |bytes packets errs drop fifo frame compressed multicast|[...
673 lo: 908188 5596 0 0 0 0 0 0 [...
674 ppp0:15475140 20721 410 0 0 410 0 0 [...
675 eth0: 614530 7085 0 0 0 0 0 1 [...
677 ...] Transmit
678 ...] bytes packets errs drop fifo colls carrier compressed
679 ...] 908188 5596 0 0 0 0 0 0
680 ...] 1375103 17405 0 0 0 0 0 0
681 ...] 1703981 5535 0 0 0 3 0 0
683 In addition, each Channel Bond interface has it's own directory. For
684 example, the bond0 device will have a directory called /proc/net/bond0/.
685 It will contain information that is specific to that bond, such as the
686 current slaves of the bond, the link status of the slaves, and how
687 many times the slaves link has failed.
689 1.5 SCSI info
690 -------------
692 If you have a SCSI host adapter in your system, you'll find a subdirectory
693 named after the driver for this adapter in /proc/scsi. You'll also see a list
694 of all recognized SCSI devices in /proc/scsi:
696 >cat /proc/scsi/scsi
697 Attached devices:
698 Host: scsi0 Channel: 00 Id: 00 Lun: 00
699 Vendor: IBM Model: DGHS09U Rev: 03E0
700 Type: Direct-Access ANSI SCSI revision: 03
701 Host: scsi0 Channel: 00 Id: 06 Lun: 00
702 Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04
703 Type: CD-ROM ANSI SCSI revision: 02
706 The directory named after the driver has one file for each adapter found in
707 the system. These files contain information about the controller, including
708 the used IRQ and the IO address range. The amount of information shown is
709 dependent on the adapter you use. The example shows the output for an Adaptec
710 AHA-2940 SCSI adapter:
712 > cat /proc/scsi/aic7xxx/0
714 Adaptec AIC7xxx driver version: 5.1.19/3.2.4
715 Compile Options:
716 TCQ Enabled By Default : Disabled
717 AIC7XXX_PROC_STATS : Disabled
718 AIC7XXX_RESET_DELAY : 5
719 Adapter Configuration:
720 SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
721 Ultra Wide Controller
722 PCI MMAPed I/O Base: 0xeb001000
723 Adapter SEEPROM Config: SEEPROM found and used.
724 Adaptec SCSI BIOS: Enabled
725 IRQ: 10
726 SCBs: Active 0, Max Active 2,
727 Allocated 15, HW 16, Page 255
728 Interrupts: 160328
729 BIOS Control Word: 0x18b6
730 Adapter Control Word: 0x005b
731 Extended Translation: Enabled
732 Disconnect Enable Flags: 0xffff
733 Ultra Enable Flags: 0x0001
734 Tag Queue Enable Flags: 0x0000
735 Ordered Queue Tag Flags: 0x0000
736 Default Tag Queue Depth: 8
737 Tagged Queue By Device array for aic7xxx host instance 0:
738 {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
739 Actual queue depth per device for aic7xxx host instance 0:
740 {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
741 Statistics:
742 (scsi0:0:0:0)
743 Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
744 Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
745 Total transfers 160151 (74577 reads and 85574 writes)
746 (scsi0:0:6:0)
747 Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
748 Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0)
749 Total transfers 0 (0 reads and 0 writes)
752 1.6 Parallel port info in /proc/parport
753 ---------------------------------------
755 The directory /proc/parport contains information about the parallel ports of
756 your system. It has one subdirectory for each port, named after the port
757 number (0,1,2,...).
759 These directories contain the four files shown in Table 1-8.
762 Table 1-8: Files in /proc/parport
763 ..............................................................................
764 File Content
765 autoprobe Any IEEE-1284 device ID information that has been acquired.
766 devices list of the device drivers using that port. A + will appear by the
767 name of the device currently using the port (it might not appear
768 against any).
769 hardware Parallel port's base address, IRQ line and DMA channel.
770 irq IRQ that parport is using for that port. This is in a separate
771 file to allow you to alter it by writing a new value in (IRQ
772 number or none).
773 ..............................................................................
775 1.7 TTY info in /proc/tty
776 -------------------------
778 Information about the available and actually used tty's can be found in the
779 directory /proc/tty.You'll find entries for drivers and line disciplines in
780 this directory, as shown in Table 1-9.
783 Table 1-9: Files in /proc/tty
784 ..............................................................................
785 File Content
786 drivers list of drivers and their usage
787 ldiscs registered line disciplines
788 driver/serial usage statistic and status of single tty lines
789 ..............................................................................
791 To see which tty's are currently in use, you can simply look into the file
792 /proc/tty/drivers:
794 > cat /proc/tty/drivers
795 pty_slave /dev/pts 136 0-255 pty:slave
796 pty_master /dev/ptm 128 0-255 pty:master
797 pty_slave /dev/ttyp 3 0-255 pty:slave
798 pty_master /dev/pty 2 0-255 pty:master
799 serial /dev/cua 5 64-67 serial:callout
800 serial /dev/ttyS 4 64-67 serial
801 /dev/tty0 /dev/tty0 4 0 system:vtmaster
802 /dev/ptmx /dev/ptmx 5 2 system
803 /dev/console /dev/console 5 1 system:console
804 /dev/tty /dev/tty 5 0 system:/dev/tty
805 unknown /dev/tty 4 1-63 console
808 1.8 Miscellaneous kernel statistics in /proc/stat
809 -------------------------------------------------
811 Various pieces of information about kernel activity are available in the
812 /proc/stat file. All of the numbers reported in this file are aggregates
813 since the system first booted. For a quick look, simply cat the file:
815 > cat /proc/stat
816 cpu 2255 34 2290 22625563 6290 127 456 0
817 cpu0 1132 34 1441 11311718 3675 127 438 0
818 cpu1 1123 0 849 11313845 2614 0 18 0
819 intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
820 ctxt 1990473
821 btime 1062191376
822 processes 2915
823 procs_running 1
824 procs_blocked 0
826 The very first "cpu" line aggregates the numbers in all of the other "cpuN"
827 lines. These numbers identify the amount of time the CPU has spent performing
828 different kinds of work. Time units are in USER_HZ (typically hundredths of a
829 second). The meanings of the columns are as follows, from left to right:
831 - user: normal processes executing in user mode
832 - nice: niced processes executing in user mode
833 - system: processes executing in kernel mode
834 - idle: twiddling thumbs
835 - iowait: waiting for I/O to complete
836 - irq: servicing interrupts
837 - softirq: servicing softirqs
838 - steal: involuntary wait
840 The "intr" line gives counts of interrupts serviced since boot time, for each
841 of the possible system interrupts. The first column is the total of all
842 interrupts serviced; each subsequent column is the total for that particular
843 interrupt.
845 The "ctxt" line gives the total number of context switches across all CPUs.
847 The "btime" line gives the time at which the system booted, in seconds since
848 the Unix epoch.
850 The "processes" line gives the number of processes and threads created, which
851 includes (but is not limited to) those created by calls to the fork() and
852 clone() system calls.
854 The "procs_running" line gives the number of processes currently running on
855 CPUs.
857 The "procs_blocked" line gives the number of processes currently blocked,
858 waiting for I/O to complete.
861 ------------------------------------------------------------------------------
862 Summary
863 ------------------------------------------------------------------------------
864 The /proc file system serves information about the running system. It not only
865 allows access to process data but also allows you to request the kernel status
866 by reading files in the hierarchy.
868 The directory structure of /proc reflects the types of information and makes
869 it easy, if not obvious, where to look for specific data.
870 ------------------------------------------------------------------------------
872 ------------------------------------------------------------------------------
873 CHAPTER 2: MODIFYING SYSTEM PARAMETERS
874 ------------------------------------------------------------------------------
876 ------------------------------------------------------------------------------
877 In This Chapter
878 ------------------------------------------------------------------------------
879 * Modifying kernel parameters by writing into files found in /proc/sys
880 * Exploring the files which modify certain parameters
881 * Review of the /proc/sys file tree
882 ------------------------------------------------------------------------------
885 A very interesting part of /proc is the directory /proc/sys. This is not only
886 a source of information, it also allows you to change parameters within the
887 kernel. Be very careful when attempting this. You can optimize your system,
888 but you can also cause it to crash. Never alter kernel parameters on a
889 production system. Set up a development machine and test to make sure that
890 everything works the way you want it to. You may have no alternative but to
891 reboot the machine once an error has been made.
893 To change a value, simply echo the new value into the file. An example is
894 given below in the section on the file system data. You need to be root to do
895 this. You can create your own boot script to perform this every time your
896 system boots.
898 The files in /proc/sys can be used to fine tune and monitor miscellaneous and
899 general things in the operation of the Linux kernel. Since some of the files
900 can inadvertently disrupt your system, it is advisable to read both
901 documentation and source before actually making adjustments. In any case, be
902 very careful when writing to any of these files. The entries in /proc may
903 change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt
904 review the kernel documentation in the directory /usr/src/linux/Documentation.
905 This chapter is heavily based on the documentation included in the pre 2.2
906 kernels, and became part of it in version 2.2.1 of the Linux kernel.
908 2.1 /proc/sys/fs - File system data
909 -----------------------------------
911 This subdirectory contains specific file system, file handle, inode, dentry
912 and quota information.
914 Currently, these files are in /proc/sys/fs:
916 dentry-state
917 ------------
919 Status of the directory cache. Since directory entries are dynamically
920 allocated and deallocated, this file indicates the current status. It holds
921 six values, in which the last two are not used and are always zero. The others
922 are listed in table 2-1.
925 Table 2-1: Status files of the directory cache
926 ..............................................................................
927 File Content
928 nr_dentry Almost always zero
929 nr_unused Number of unused cache entries
930 age_limit
931 in seconds after the entry may be reclaimed, when memory is short
932 want_pages internally
933 ..............................................................................
935 dquot-nr and dquot-max
936 ----------------------
938 The file dquot-max shows the maximum number of cached disk quota entries.
940 The file dquot-nr shows the number of allocated disk quota entries and the
941 number of free disk quota entries.
943 If the number of available cached disk quotas is very low and you have a large
944 number of simultaneous system users, you might want to raise the limit.
946 file-nr and file-max
947 --------------------
949 The kernel allocates file handles dynamically, but doesn't free them again at
950 this time.
952 The value in file-max denotes the maximum number of file handles that the
953 Linux kernel will allocate. When you get a lot of error messages about running
954 out of file handles, you might want to raise this limit. The default value is
955 10% of RAM in kilobytes. To change it, just write the new number into the
956 file:
958 # cat /proc/sys/fs/file-max
959 4096
960 # echo 8192 > /proc/sys/fs/file-max
961 # cat /proc/sys/fs/file-max
962 8192
965 This method of revision is useful for all customizable parameters of the
966 kernel - simply echo the new value to the corresponding file.
968 Historically, the three values in file-nr denoted the number of allocated file
969 handles, the number of allocated but unused file handles, and the maximum
970 number of file handles. Linux 2.6 always reports 0 as the number of free file
971 handles -- this is not an error, it just means that the number of allocated
972 file handles exactly matches the number of used file handles.
974 Attempts to allocate more file descriptors than file-max are reported with
975 printk, look for "VFS: file-max limit <number> reached".
977 inode-state and inode-nr
978 ------------------------
980 The file inode-nr contains the first two items from inode-state, so we'll skip
981 to that file...
983 inode-state contains two actual numbers and five dummy values. The numbers
984 are nr_inodes and nr_free_inodes (in order of appearance).
986 nr_inodes
987 ~~~~~~~~~
989 Denotes the number of inodes the system has allocated. This number will
990 grow and shrink dynamically.
992 nr_free_inodes
993 --------------
995 Represents the number of free inodes. Ie. The number of inuse inodes is
996 (nr_inodes - nr_free_inodes).
998 aio-nr and aio-max-nr
999 ---------------------
1001 aio-nr is the running total of the number of events specified on the
1002 io_setup system call for all currently active aio contexts. If aio-nr
1003 reaches aio-max-nr then io_setup will fail with EAGAIN. Note that
1004 raising aio-max-nr does not result in the pre-allocation or re-sizing
1005 of any kernel data structures.
1007 2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
1008 -----------------------------------------------------------
1010 Besides these files, there is the subdirectory /proc/sys/fs/binfmt_misc. This
1011 handles the kernel support for miscellaneous binary formats.
1013 Binfmt_misc provides the ability to register additional binary formats to the
1014 Kernel without compiling an additional module/kernel. Therefore, binfmt_misc
1015 needs to know magic numbers at the beginning or the filename extension of the
1016 binary.
1018 It works by maintaining a linked list of structs that contain a description of
1019 a binary format, including a magic with size (or the filename extension),
1020 offset and mask, and the interpreter name. On request it invokes the given
1021 interpreter with the original program as argument, as binfmt_java and
1022 binfmt_em86 and binfmt_mz do. Since binfmt_misc does not define any default
1023 binary-formats, you have to register an additional binary-format.
1025 There are two general files in binfmt_misc and one file per registered format.
1026 The two general files are register and status.
1028 Registering a new binary format
1029 -------------------------------
1031 To register a new binary format you have to issue the command
1033 echo :name:type:offset:magic:mask:interpreter: > /proc/sys/fs/binfmt_misc/register
1037 with appropriate name (the name for the /proc-dir entry), offset (defaults to
1038 0, if omitted), magic, mask (which can be omitted, defaults to all 0xff) and
1039 last but not least, the interpreter that is to be invoked (for example and
1040 testing /bin/echo). Type can be M for usual magic matching or E for filename
1041 extension matching (give extension in place of magic).
1043 Check or reset the status of the binary format handler
1044 ------------------------------------------------------
1046 If you do a cat on the file /proc/sys/fs/binfmt_misc/status, you will get the
1047 current status (enabled/disabled) of binfmt_misc. Change the status by echoing
1048 0 (disables) or 1 (enables) or -1 (caution: this clears all previously
1049 registered binary formats) to status. For example echo 0 > status to disable
1050 binfmt_misc (temporarily).
1052 Status of a single handler
1053 --------------------------
1055 Each registered handler has an entry in /proc/sys/fs/binfmt_misc. These files
1056 perform the same function as status, but their scope is limited to the actual
1057 binary format. By cating this file, you also receive all related information
1058 about the interpreter/magic of the binfmt.
1060 Example usage of binfmt_misc (emulate binfmt_java)
1061 --------------------------------------------------
1063 cd /proc/sys/fs/binfmt_misc
1064 echo ':Java:M::\xca\xfe\xba\xbe::/usr/local/java/bin/javawrapper:' > register
1065 echo ':HTML:E::html::/usr/local/java/bin/appletviewer:' > register
1066 echo ':Applet:M::<!--applet::/usr/local/java/bin/appletviewer:' > register
1067 echo ':DEXE:M::\x0eDEX::/usr/bin/dosexec:' > register
1070 These four lines add support for Java executables and Java applets (like
1071 binfmt_java, additionally recognizing the .html extension with no need to put
1072 <!--applet> to every applet file). You have to install the JDK and the
1073 shell-script /usr/local/java/bin/javawrapper too. It works around the
1074 brokenness of the Java filename handling. To add a Java binary, just create a
1075 link to the class-file somewhere in the path.
1077 2.3 /proc/sys/kernel - general kernel parameters
1078 ------------------------------------------------
1080 This directory reflects general kernel behaviors. As I've said before, the
1081 contents depend on your configuration. Here you'll find the most important
1082 files, along with descriptions of what they mean and how to use them.
1084 acct
1085 ----
1087 The file contains three values; highwater, lowwater, and frequency.
1089 It exists only when BSD-style process accounting is enabled. These values
1090 control its behavior. If the free space on the file system where the log lives
1091 goes below lowwater percentage, accounting suspends. If it goes above
1092 highwater percentage, accounting resumes. Frequency determines how often you
1093 check the amount of free space (value is in seconds). Default settings are: 4,
1094 2, and 30. That is, suspend accounting if there is less than 2 percent free;
1095 resume it if we have a value of 3 or more percent; consider information about
1096 the amount of free space valid for 30 seconds
1098 audit_argv_kb
1099 -------------
1101 The file contains a single value denoting the limit on the argv array size
1102 for execve (in KiB). This limit is only applied when system call auditing for
1103 execve is enabled, otherwise the value is ignored.
1105 ctrl-alt-del
1106 ------------
1108 When the value in this file is 0, ctrl-alt-del is trapped and sent to the init
1109 program to handle a graceful restart. However, when the value is greater that
1110 zero, Linux's reaction to this key combination will be an immediate reboot,
1111 without syncing its dirty buffers.
1113 [NOTE]
1114 When a program (like dosemu) has the keyboard in raw mode, the
1115 ctrl-alt-del is intercepted by the program before it ever reaches the
1116 kernel tty layer, and it is up to the program to decide what to do with
1117 it.
1119 domainname and hostname
1120 -----------------------
1122 These files can be controlled to set the NIS domainname and hostname of your
1123 box. For the classic darkstar.frop.org a simple:
1125 # echo "darkstar" > /proc/sys/kernel/hostname
1126 # echo "frop.org" > /proc/sys/kernel/domainname
1129 would suffice to set your hostname and NIS domainname.
1131 osrelease, ostype and version
1132 -----------------------------
1134 The names make it pretty obvious what these fields contain:
1136 > cat /proc/sys/kernel/osrelease
1137 2.2.12
1139 > cat /proc/sys/kernel/ostype
1140 Linux
1142 > cat /proc/sys/kernel/version
1143 #4 Fri Oct 1 12:41:14 PDT 1999
1146 The files osrelease and ostype should be clear enough. Version needs a little
1147 more clarification. The #4 means that this is the 4th kernel built from this
1148 source base and the date after it indicates the time the kernel was built. The
1149 only way to tune these values is to rebuild the kernel.
1151 panic
1152 -----
1154 The value in this file represents the number of seconds the kernel waits
1155 before rebooting on a panic. When you use the software watchdog, the
1156 recommended setting is 60. If set to 0, the auto reboot after a kernel panic
1157 is disabled, which is the default setting.
1159 printk
1160 ------
1162 The four values in printk denote
1163 * console_loglevel,
1164 * default_message_loglevel,
1165 * minimum_console_loglevel and
1166 * default_console_loglevel
1167 respectively.
1169 These values influence printk() behavior when printing or logging error
1170 messages, which come from inside the kernel. See syslog(2) for more
1171 information on the different log levels.
1173 console_loglevel
1174 ----------------
1176 Messages with a higher priority than this will be printed to the console.
1178 default_message_level
1179 ---------------------
1181 Messages without an explicit priority will be printed with this priority.
1183 minimum_console_loglevel
1184 ------------------------
1186 Minimum (highest) value to which the console_loglevel can be set.
1188 default_console_loglevel
1189 ------------------------
1191 Default value for console_loglevel.
1193 sg-big-buff
1194 -----------
1196 This file shows the size of the generic SCSI (sg) buffer. At this point, you
1197 can't tune it yet, but you can change it at compile time by editing
1198 include/scsi/sg.h and changing the value of SG_BIG_BUFF.
1200 If you use a scanner with SANE (Scanner Access Now Easy) you might want to set
1201 this to a higher value. Refer to the SANE documentation on this issue.
1203 modprobe
1204 --------
1206 The location where the modprobe binary is located. The kernel uses this
1207 program to load modules on demand.
1209 unknown_nmi_panic
1210 -----------------
1212 The value in this file affects behavior of handling NMI. When the value is
1213 non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel
1214 debugging information is displayed on console.
1216 NMI switch that most IA32 servers have fires unknown NMI up, for example.
1217 If a system hangs up, try pressing the NMI switch.
1219 nmi_watchdog
1220 ------------
1222 Enables/Disables the NMI watchdog on x86 systems. When the value is non-zero
1223 the NMI watchdog is enabled and will continuously test all online cpus to
1224 determine whether or not they are still functioning properly.
1226 Because the NMI watchdog shares registers with oprofile, by disabling the NMI
1227 watchdog, oprofile may have more registers to utilize.
1229 maps_protect
1230 ------------
1232 Enables/Disables the protection of the per-process proc entries "maps" and
1233 "smaps". When enabled, the contents of these files are visible only to
1234 readers that are allowed to ptrace() the given process.
1237 2.4 /proc/sys/vm - The virtual memory subsystem
1238 -----------------------------------------------
1240 The files in this directory can be used to tune the operation of the virtual
1241 memory (VM) subsystem of the Linux kernel.
1243 vfs_cache_pressure
1244 ------------------
1246 Controls the tendency of the kernel to reclaim the memory which is used for
1247 caching of directory and inode objects.
1249 At the default value of vfs_cache_pressure=100 the kernel will attempt to
1250 reclaim dentries and inodes at a "fair" rate with respect to pagecache and
1251 swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer
1252 to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100
1253 causes the kernel to prefer to reclaim dentries and inodes.
1255 dirty_background_ratio
1256 ----------------------
1258 Contains, as a percentage of total system memory, the number of pages at which
1259 the pdflush background writeback daemon will start writing out dirty data.
1261 dirty_ratio
1262 -----------------
1264 Contains, as a percentage of total system memory, the number of pages at which
1265 a process which is generating disk writes will itself start writing out dirty
1266 data.
1268 dirty_writeback_centisecs
1269 -------------------------
1271 The pdflush writeback daemons will periodically wake up and write `old' data
1272 out to disk. This tunable expresses the interval between those wakeups, in
1273 100'ths of a second.
1275 Setting this to zero disables periodic writeback altogether.
1277 dirty_expire_centisecs
1278 ----------------------
1280 This tunable is used to define when dirty data is old enough to be eligible
1281 for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
1282 Data which has been dirty in-memory for longer than this interval will be
1283 written out next time a pdflush daemon wakes up.
1285 legacy_va_layout
1286 ----------------
1288 If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
1289 will use the legacy (2.4) layout for all processes.
1291 lower_zone_protection
1292 ---------------------
1294 For some specialised workloads on highmem machines it is dangerous for
1295 the kernel to allow process memory to be allocated from the "lowmem"
1296 zone. This is because that memory could then be pinned via the mlock()
1297 system call, or by unavailability of swapspace.
1299 And on large highmem machines this lack of reclaimable lowmem memory
1300 can be fatal.
1302 So the Linux page allocator has a mechanism which prevents allocations
1303 which _could_ use highmem from using too much lowmem. This means that
1304 a certain amount of lowmem is defended from the possibility of being
1305 captured into pinned user memory.
1307 (The same argument applies to the old 16 megabyte ISA DMA region. This
1308 mechanism will also defend that region from allocations which could use
1309 highmem or lowmem).
1311 The `lower_zone_protection' tunable determines how aggressive the kernel is
1312 in defending these lower zones. The default value is zero - no
1313 protection at all.
1315 If you have a machine which uses highmem or ISA DMA and your
1316 applications are using mlock(), or if you are running with no swap then
1317 you probably should increase the lower_zone_protection setting.
1319 The units of this tunable are fairly vague. It is approximately equal
1320 to "megabytes," so setting lower_zone_protection=100 will protect around 100
1321 megabytes of the lowmem zone from user allocations. It will also make
1322 those 100 megabytes unavailable for use by applications and by
1323 pagecache, so there is a cost.
1325 The effects of this tunable may be observed by monitoring
1326 /proc/meminfo:LowFree. Write a single huge file and observe the point
1327 at which LowFree ceases to fall.
1329 A reasonable value for lower_zone_protection is 100.
1331 page-cluster
1332 ------------
1334 page-cluster controls the number of pages which are written to swap in
1335 a single attempt. The swap I/O size.
1337 It is a logarithmic value - setting it to zero means "1 page", setting
1338 it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
1340 The default value is three (eight pages at a time). There may be some
1341 small benefits in tuning this to a different value if your workload is
1342 swap-intensive.
1344 overcommit_memory
1345 -----------------
1347 Controls overcommit of system memory, possibly allowing processes
1348 to allocate (but not use) more memory than is actually available.
1351 0 - Heuristic overcommit handling. Obvious overcommits of
1352 address space are refused. Used for a typical system. It
1353 ensures a seriously wild allocation fails while allowing
1354 overcommit to reduce swap usage. root is allowed to
1355 allocate slightly more memory in this mode. This is the
1356 default.
1358 1 - Always overcommit. Appropriate for some scientific
1359 applications.
1361 2 - Don't overcommit. The total address space commit
1362 for the system is not permitted to exceed swap plus a
1363 configurable percentage (default is 50) of physical RAM.
1364 Depending on the percentage you use, in most situations
1365 this means a process will not be killed while attempting
1366 to use already-allocated memory but will receive errors
1367 on memory allocation as appropriate.
1369 overcommit_ratio
1370 ----------------
1372 Percentage of physical memory size to include in overcommit calculations
1373 (see above.)
1375 Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
1377 swapspace = total size of all swap areas
1378 physmem = size of physical memory in system
1380 nr_hugepages and hugetlb_shm_group
1381 ----------------------------------
1383 nr_hugepages configures number of hugetlb page reserved for the system.
1385 hugetlb_shm_group contains group id that is allowed to create SysV shared
1386 memory segment using hugetlb page.
1388 hugepages_treat_as_movable
1389 --------------------------
1391 This parameter is only useful when kernelcore= is specified at boot time to
1392 create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
1393 are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
1394 value written to hugepages_treat_as_movable allows huge pages to be allocated
1395 from ZONE_MOVABLE.
1397 Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
1398 pages pool can easily grow or shrink within. Assuming that applications are
1399 not running that mlock() a lot of memory, it is likely the huge pages pool
1400 can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
1401 into nr_hugepages and triggering page reclaim.
1403 laptop_mode
1404 -----------
1406 laptop_mode is a knob that controls "laptop mode". All the things that are
1407 controlled by this knob are discussed in Documentation/laptop-mode.txt.
1409 block_dump
1410 ----------
1412 block_dump enables block I/O debugging when set to a nonzero value. More
1413 information on block I/O debugging is in Documentation/laptop-mode.txt.
1415 swap_token_timeout
1416 ------------------
1418 This file contains valid hold time of swap out protection token. The Linux
1419 VM has token based thrashing control mechanism and uses the token to prevent
1420 unnecessary page faults in thrashing situation. The unit of the value is
1421 second. The value would be useful to tune thrashing behavior.
1423 drop_caches
1424 -----------
1426 Writing to this will cause the kernel to drop clean caches, dentries and
1427 inodes from memory, causing that memory to become free.
1429 To free pagecache:
1430 echo 1 > /proc/sys/vm/drop_caches
1431 To free dentries and inodes:
1432 echo 2 > /proc/sys/vm/drop_caches
1433 To free pagecache, dentries and inodes:
1434 echo 3 > /proc/sys/vm/drop_caches
1436 As this is a non-destructive operation and dirty objects are not freeable, the
1437 user should run `sync' first.
1440 2.5 /proc/sys/dev - Device specific parameters
1441 ----------------------------------------------
1443 Currently there is only support for CDROM drives, and for those, there is only
1444 one read-only file containing information about the CD-ROM drives attached to
1445 the system:
1447 >cat /proc/sys/dev/cdrom/info
1448 CD-ROM information, Id: cdrom.c 2.55 1999/04/25
1450 drive name: sr0 hdb
1451 drive speed: 32 40
1452 drive # of slots: 1 0
1453 Can close tray: 1 1
1454 Can open tray: 1 1
1455 Can lock tray: 1 1
1456 Can change speed: 1 1
1457 Can select disk: 0 1
1458 Can read multisession: 1 1
1459 Can read MCN: 1 1
1460 Reports media changed: 1 1
1461 Can play audio: 1 1
1464 You see two drives, sr0 and hdb, along with a list of their features.
1466 2.6 /proc/sys/sunrpc - Remote procedure calls
1467 ---------------------------------------------
1469 This directory contains four files, which enable or disable debugging for the
1470 RPC functions NFS, NFS-daemon, RPC and NLM. The default values are 0. They can
1471 be set to one to turn debugging on. (The default value is 0 for each)
1473 2.7 /proc/sys/net - Networking stuff
1474 ------------------------------------
1476 The interface to the networking parts of the kernel is located in
1477 /proc/sys/net. Table 2-3 shows all possible subdirectories. You may see only
1478 some of them, depending on your kernel's configuration.
1481 Table 2-3: Subdirectories in /proc/sys/net
1482 ..............................................................................
1483 Directory Content Directory Content
1484 core General parameter appletalk Appletalk protocol
1485 unix Unix domain sockets netrom NET/ROM
1486 802 E802 protocol ax25 AX25
1487 ethernet Ethernet protocol rose X.25 PLP layer
1488 ipv4 IP version 4 x25 X.25 protocol
1489 ipx IPX token-ring IBM token ring
1490 bridge Bridging decnet DEC net
1491 ipv6 IP version 6
1492 ..............................................................................
1494 We will concentrate on IP networking here. Since AX15, X.25, and DEC Net are
1495 only minor players in the Linux world, we'll skip them in this chapter. You'll
1496 find some short info on Appletalk and IPX further on in this chapter. Review
1497 the online documentation and the kernel source to get a detailed view of the
1498 parameters for those protocols. In this section we'll discuss the
1499 subdirectories printed in bold letters in the table above. As default values
1500 are suitable for most needs, there is no need to change these values.
1502 /proc/sys/net/core - Network core options
1503 -----------------------------------------
1505 rmem_default
1506 ------------
1508 The default setting of the socket receive buffer in bytes.
1510 rmem_max
1511 --------
1513 The maximum receive socket buffer size in bytes.
1515 wmem_default
1516 ------------
1518 The default setting (in bytes) of the socket send buffer.
1520 wmem_max
1521 --------
1523 The maximum send socket buffer size in bytes.
1525 message_burst and message_cost
1526 ------------------------------
1528 These parameters are used to limit the warning messages written to the kernel
1529 log from the networking code. They enforce a rate limit to make a
1530 denial-of-service attack impossible. A higher message_cost factor, results in
1531 fewer messages that will be written. Message_burst controls when messages will
1532 be dropped. The default settings limit warning messages to one every five
1533 seconds.
1535 warnings
1536 --------
1538 This controls console messages from the networking stack that can occur because
1539 of problems on the network like duplicate address or bad checksums. Normally,
1540 this should be enabled, but if the problem persists the messages can be
1541 disabled.
1544 netdev_max_backlog
1545 ------------------
1547 Maximum number of packets, queued on the INPUT side, when the interface
1548 receives packets faster than kernel can process them.
1550 optmem_max
1551 ----------
1553 Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence
1554 of struct cmsghdr structures with appended data.
1556 /proc/sys/net/unix - Parameters for Unix domain sockets
1557 -------------------------------------------------------
1559 There are only two files in this subdirectory. They control the delays for
1560 deleting and destroying socket descriptors.
1562 2.8 /proc/sys/net/ipv4 - IPV4 settings
1563 --------------------------------------
1565 IP version 4 is still the most used protocol in Unix networking. It will be
1566 replaced by IP version 6 in the next couple of years, but for the moment it's
1567 the de facto standard for the internet and is used in most networking
1568 environments around the world. Because of the importance of this protocol,
1569 we'll have a deeper look into the subtree controlling the behavior of the IPv4
1570 subsystem of the Linux kernel.
1572 Let's start with the entries in /proc/sys/net/ipv4.
1574 ICMP settings
1575 -------------
1577 icmp_echo_ignore_all and icmp_echo_ignore_broadcasts
1578 ----------------------------------------------------
1580 Turn on (1) or off (0), if the kernel should ignore all ICMP ECHO requests, or
1581 just those to broadcast and multicast addresses.
1583 Please note that if you accept ICMP echo requests with a broadcast/multi\-cast
1584 destination address your network may be used as an exploder for denial of
1585 service packet flooding attacks to other hosts.
1587 icmp_destunreach_rate, icmp_echoreply_rate, icmp_paramprob_rate and icmp_timeexeed_rate
1588 ---------------------------------------------------------------------------------------
1590 Sets limits for sending ICMP packets to specific targets. A value of zero
1591 disables all limiting. Any positive value sets the maximum package rate in
1592 hundredth of a second (on Intel systems).
1594 IP settings
1595 -----------
1597 ip_autoconfig
1598 -------------
1600 This file contains the number one if the host received its IP configuration by
1601 RARP, BOOTP, DHCP or a similar mechanism. Otherwise it is zero.
1603 ip_default_ttl
1604 --------------
1606 TTL (Time To Live) for IPv4 interfaces. This is simply the maximum number of
1607 hops a packet may travel.
1609 ip_dynaddr
1610 ----------
1612 Enable dynamic socket address rewriting on interface address change. This is
1613 useful for dialup interface with changing IP addresses.
1615 ip_forward
1616 ----------
1618 Enable or disable forwarding of IP packages between interfaces. Changing this
1619 value resets all other parameters to their default values. They differ if the
1620 kernel is configured as host or router.
1622 ip_local_port_range
1623 -------------------
1625 Range of ports used by TCP and UDP to choose the local port. Contains two
1626 numbers, the first number is the lowest port, the second number the highest
1627 local port. Default is 1024-4999. Should be changed to 32768-61000 for
1628 high-usage systems.
1630 ip_no_pmtu_disc
1631 ---------------
1633 Global switch to turn path MTU discovery off. It can also be set on a per
1634 socket basis by the applications or on a per route basis.
1636 ip_masq_debug
1637 -------------
1639 Enable/disable debugging of IP masquerading.
1641 IP fragmentation settings
1642 -------------------------
1644 ipfrag_high_trash and ipfrag_low_trash
1645 --------------------------------------
1647 Maximum memory used to reassemble IP fragments. When ipfrag_high_thresh bytes
1648 of memory is allocated for this purpose, the fragment handler will toss
1649 packets until ipfrag_low_thresh is reached.
1651 ipfrag_time
1652 -----------
1654 Time in seconds to keep an IP fragment in memory.
1656 TCP settings
1657 ------------
1659 tcp_ecn
1660 -------
1662 This file controls the use of the ECN bit in the IPv4 headers. This is a new
1663 feature about Explicit Congestion Notification, but some routers and firewalls
1664 block traffic that has this bit set, so it could be necessary to echo 0 to
1665 /proc/sys/net/ipv4/tcp_ecn if you want to talk to these sites. For more info
1666 you could read RFC2481.
1668 tcp_retrans_collapse
1669 --------------------
1671 Bug-to-bug compatibility with some broken printers. On retransmit, try to send
1672 larger packets to work around bugs in certain TCP stacks. Can be turned off by
1673 setting it to zero.
1675 tcp_keepalive_probes
1676 --------------------
1678 Number of keep alive probes TCP sends out, until it decides that the
1679 connection is broken.
1681 tcp_keepalive_time
1682 ------------------
1684 How often TCP sends out keep alive messages, when keep alive is enabled. The
1685 default is 2 hours.
1687 tcp_syn_retries
1688 ---------------
1690 Number of times initial SYNs for a TCP connection attempt will be
1691 retransmitted. Should not be higher than 255. This is only the timeout for
1692 outgoing connections, for incoming connections the number of retransmits is
1693 defined by tcp_retries1.
1695 tcp_sack
1696 --------
1698 Enable select acknowledgments after RFC2018.
1700 tcp_timestamps
1701 --------------
1703 Enable timestamps as defined in RFC1323.
1705 tcp_stdurg
1706 ----------
1708 Enable the strict RFC793 interpretation of the TCP urgent pointer field. The
1709 default is to use the BSD compatible interpretation of the urgent pointer
1710 pointing to the first byte after the urgent data. The RFC793 interpretation is
1711 to have it point to the last byte of urgent data. Enabling this option may
1712 lead to interoperability problems. Disabled by default.
1714 tcp_syncookies
1715 --------------
1717 Only valid when the kernel was compiled with CONFIG_SYNCOOKIES. Send out
1718 syncookies when the syn backlog queue of a socket overflows. This is to ward
1719 off the common 'syn flood attack'. Disabled by default.
1721 Note that the concept of a socket backlog is abandoned. This means the peer
1722 may not receive reliable error messages from an over loaded server with
1723 syncookies enabled.
1725 tcp_window_scaling
1726 ------------------
1728 Enable window scaling as defined in RFC1323.
1730 tcp_fin_timeout
1731 ---------------
1733 The length of time in seconds it takes to receive a final FIN before the
1734 socket is always closed. This is strictly a violation of the TCP
1735 specification, but required to prevent denial-of-service attacks.
1737 tcp_max_ka_probes
1738 -----------------
1740 Indicates how many keep alive probes are sent per slow timer run. Should not
1741 be set too high to prevent bursts.
1743 tcp_max_syn_backlog
1744 -------------------
1746 Length of the per socket backlog queue. Since Linux 2.2 the backlog specified
1747 in listen(2) only specifies the length of the backlog queue of already
1748 established sockets. When more connection requests arrive Linux starts to drop
1749 packets. When syncookies are enabled the packets are still answered and the
1750 maximum queue is effectively ignored.
1752 tcp_retries1
1753 ------------
1755 Defines how often an answer to a TCP connection request is retransmitted
1756 before giving up.
1758 tcp_retries2
1759 ------------
1761 Defines how often a TCP packet is retransmitted before giving up.
1763 Interface specific settings
1764 ---------------------------
1766 In the directory /proc/sys/net/ipv4/conf you'll find one subdirectory for each
1767 interface the system knows about and one directory calls all. Changes in the
1768 all subdirectory affect all interfaces, whereas changes in the other
1769 subdirectories affect only one interface. All directories have the same
1770 entries:
1772 accept_redirects
1773 ----------------
1775 This switch decides if the kernel accepts ICMP redirect messages or not. The
1776 default is 'yes' if the kernel is configured for a regular host and 'no' for a
1777 router configuration.
1779 accept_source_route
1780 -------------------
1782 Should source routed packages be accepted or declined. The default is
1783 dependent on the kernel configuration. It's 'yes' for routers and 'no' for
1784 hosts.
1786 bootp_relay
1787 ~~~~~~~~~~~
1789 Accept packets with source address 0.b.c.d with destinations not to this host
1790 as local ones. It is supposed that a BOOTP relay daemon will catch and forward
1791 such packets.
1793 The default is 0, since this feature is not implemented yet (kernel version
1794 2.2.12).
1796 forwarding
1797 ----------
1799 Enable or disable IP forwarding on this interface.
1801 log_martians
1802 ------------
1804 Log packets with source addresses with no known route to kernel log.
1806 mc_forwarding
1807 -------------
1809 Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE and a
1810 multicast routing daemon is required.
1812 proxy_arp
1813 ---------
1815 Does (1) or does not (0) perform proxy ARP.
1817 rp_filter
1818 ---------
1820 Integer value determines if a source validation should be made. 1 means yes, 0
1821 means no. Disabled by default, but local/broadcast address spoofing is always
1822 on.
1824 If you set this to 1 on a router that is the only connection for a network to
1825 the net, it will prevent spoofing attacks against your internal networks
1826 (external addresses can still be spoofed), without the need for additional
1827 firewall rules.
1829 secure_redirects
1830 ----------------
1832 Accept ICMP redirect messages only for gateways, listed in default gateway
1833 list. Enabled by default.
1835 shared_media
1836 ------------
1838 If it is not set the kernel does not assume that different subnets on this
1839 device can communicate directly. Default setting is 'yes'.
1841 send_redirects
1842 --------------
1844 Determines whether to send ICMP redirects to other hosts.
1846 Routing settings
1847 ----------------
1849 The directory /proc/sys/net/ipv4/route contains several file to control
1850 routing issues.
1852 error_burst and error_cost
1853 --------------------------
1855 These parameters are used to limit how many ICMP destination unreachable to
1856 send from the host in question. ICMP destination unreachable messages are
1857 sent when we cannot reach the next hop while trying to transmit a packet.
1858 It will also print some error messages to kernel logs if someone is ignoring
1859 our ICMP redirects. The higher the error_cost factor is, the fewer
1860 destination unreachable and error messages will be let through. Error_burst
1861 controls when destination unreachable messages and error messages will be
1862 dropped. The default settings limit warning messages to five every second.
1864 flush
1865 -----
1867 Writing to this file results in a flush of the routing cache.
1869 gc_elasticity, gc_interval, gc_min_interval_ms, gc_timeout, gc_thresh
1870 ---------------------------------------------------------------------
1872 Values to control the frequency and behavior of the garbage collection
1873 algorithm for the routing cache. gc_min_interval is deprecated and replaced
1874 by gc_min_interval_ms.
1877 max_size
1878 --------
1880 Maximum size of the routing cache. Old entries will be purged once the cache
1881 reached has this size.
1883 max_delay, min_delay
1884 --------------------
1886 Delays for flushing the routing cache.
1888 redirect_load, redirect_number
1889 ------------------------------
1891 Factors which determine if more ICPM redirects should be sent to a specific
1892 host. No redirects will be sent once the load limit or the maximum number of
1893 redirects has been reached.
1895 redirect_silence
1896 ----------------
1898 Timeout for redirects. After this period redirects will be sent again, even if
1899 this has been stopped, because the load or number limit has been reached.
1901 Network Neighbor handling
1902 -------------------------
1904 Settings about how to handle connections with direct neighbors (nodes attached
1905 to the same link) can be found in the directory /proc/sys/net/ipv4/neigh.
1907 As we saw it in the conf directory, there is a default subdirectory which
1908 holds the default values, and one directory for each interface. The contents
1909 of the directories are identical, with the single exception that the default
1910 settings contain additional options to set garbage collection parameters.
1912 In the interface directories you'll find the following entries:
1914 base_reachable_time, base_reachable_time_ms
1915 -------------------------------------------
1917 A base value used for computing the random reachable time value as specified
1918 in RFC2461.
1920 Expression of base_reachable_time, which is deprecated, is in seconds.
1921 Expression of base_reachable_time_ms is in milliseconds.
1923 retrans_time, retrans_time_ms
1924 -----------------------------
1926 The time between retransmitted Neighbor Solicitation messages.
1927 Used for address resolution and to determine if a neighbor is
1928 unreachable.
1930 Expression of retrans_time, which is deprecated, is in 1/100 seconds (for
1931 IPv4) or in jiffies (for IPv6).
1932 Expression of retrans_time_ms is in milliseconds.
1934 unres_qlen
1935 ----------
1937 Maximum queue length for a pending arp request - the number of packets which
1938 are accepted from other layers while the ARP address is still resolved.
1940 anycast_delay
1941 -------------
1943 Maximum for random delay of answers to neighbor solicitation messages in
1944 jiffies (1/100 sec). Not yet implemented (Linux does not have anycast support
1945 yet).
1947 ucast_solicit
1948 -------------
1950 Maximum number of retries for unicast solicitation.
1952 mcast_solicit
1953 -------------
1955 Maximum number of retries for multicast solicitation.
1957 delay_first_probe_time
1958 ----------------------
1960 Delay for the first time probe if the neighbor is reachable. (see
1961 gc_stale_time)
1963 locktime
1964 --------
1966 An ARP/neighbor entry is only replaced with a new one if the old is at least
1967 locktime old. This prevents ARP cache thrashing.
1969 proxy_delay
1970 -----------
1972 Maximum time (real time is random [0..proxytime]) before answering to an ARP
1973 request for which we have an proxy ARP entry. In some cases, this is used to
1974 prevent network flooding.
1976 proxy_qlen
1977 ----------
1979 Maximum queue length of the delayed proxy arp timer. (see proxy_delay).
1981 app_solicit
1982 ----------
1984 Determines the number of requests to send to the user level ARP daemon. Use 0
1985 to turn off.
1987 gc_stale_time
1988 -------------
1990 Determines how often to check for stale ARP entries. After an ARP entry is
1991 stale it will be resolved again (which is useful when an IP address migrates
1992 to another machine). When ucast_solicit is greater than 0 it first tries to
1993 send an ARP packet directly to the known host When that fails and
1994 mcast_solicit is greater than 0, an ARP request is broadcasted.
1996 2.9 Appletalk
1997 -------------
1999 The /proc/sys/net/appletalk directory holds the Appletalk configuration data
2000 when Appletalk is loaded. The configurable parameters are:
2002 aarp-expiry-time
2003 ----------------
2005 The amount of time we keep an ARP entry before expiring it. Used to age out
2006 old hosts.
2008 aarp-resolve-time
2009 -----------------
2011 The amount of time we will spend trying to resolve an Appletalk address.
2013 aarp-retransmit-limit
2014 ---------------------
2016 The number of times we will retransmit a query before giving up.
2018 aarp-tick-time
2019 --------------
2021 Controls the rate at which expires are checked.
2023 The directory /proc/net/appletalk holds the list of active Appletalk sockets
2024 on a machine.
2026 The fields indicate the DDP type, the local address (in network:node format)
2027 the remote address, the size of the transmit pending queue, the size of the
2028 received queue (bytes waiting for applications to read) the state and the uid
2029 owning the socket.
2031 /proc/net/atalk_iface lists all the interfaces configured for appletalk.It
2032 shows the name of the interface, its Appletalk address, the network range on
2033 that address (or network number for phase 1 networks), and the status of the
2034 interface.
2036 /proc/net/atalk_route lists each known network route. It lists the target
2037 (network) that the route leads to, the router (may be directly connected), the
2038 route flags, and the device the route is using.
2040 2.10 IPX
2041 --------
2043 The IPX protocol has no tunable values in proc/sys/net.
2045 The IPX protocol does, however, provide proc/net/ipx. This lists each IPX
2046 socket giving the local and remote addresses in Novell format (that is
2047 network:node:port). In accordance with the strange Novell tradition,
2048 everything but the port is in hex. Not_Connected is displayed for sockets that
2049 are not tied to a specific remote address. The Tx and Rx queue sizes indicate
2050 the number of bytes pending for transmission and reception. The state
2051 indicates the state the socket is in and the uid is the owning uid of the
2052 socket.
2054 The /proc/net/ipx_interface file lists all IPX interfaces. For each interface
2055 it gives the network number, the node number, and indicates if the network is
2056 the primary network. It also indicates which device it is bound to (or
2057 Internal for internal networks) and the Frame Type if appropriate. Linux
2058 supports 802.3, 802.2, 802.2 SNAP and DIX (Blue Book) ethernet framing for
2059 IPX.
2061 The /proc/net/ipx_route table holds a list of IPX routes. For each route it
2062 gives the destination network, the router node (or Directly) and the network
2063 address of the router (or Connected) for internal networks.
2065 2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
2066 ----------------------------------------------------------
2068 The "mqueue" filesystem provides the necessary kernel features to enable the
2069 creation of a user space library that implements the POSIX message queues
2070 API (as noted by the MSG tag in the POSIX 1003.1-2001 version of the System
2071 Interfaces specification.)
2073 The "mqueue" filesystem contains values for determining/setting the amount of
2074 resources used by the file system.
2076 /proc/sys/fs/mqueue/queues_max is a read/write file for setting/getting the
2077 maximum number of message queues allowed on the system.
2079 /proc/sys/fs/mqueue/msg_max is a read/write file for setting/getting the
2080 maximum number of messages in a queue value. In fact it is the limiting value
2081 for another (user) limit which is set in mq_open invocation. This attribute of
2082 a queue must be less or equal then msg_max.
2084 /proc/sys/fs/mqueue/msgsize_max is a read/write file for setting/getting the
2085 maximum message size value (it is every message queue's attribute set during
2086 its creation).
2088 2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score
2089 ------------------------------------------------------
2091 This file can be used to adjust the score used to select which processes
2092 should be killed in an out-of-memory situation. Giving it a high score will
2093 increase the likelihood of this process being killed by the oom-killer. Valid
2094 values are in the range -16 to +15, plus the special value -17, which disables
2095 oom-killing altogether for this process.
2097 2.13 /proc/<pid>/oom_score - Display current oom-killer score
2098 -------------------------------------------------------------
2100 ------------------------------------------------------------------------------
2101 This file can be used to check the current score used by the oom-killer is for
2102 any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which
2103 process should be killed in an out-of-memory situation.
2105 ------------------------------------------------------------------------------
2106 Summary
2107 ------------------------------------------------------------------------------
2108 Certain aspects of kernel behavior can be modified at runtime, without the
2109 need to recompile the kernel, or even to reboot the system. The files in the
2110 /proc/sys tree can not only be read, but also modified. You can use the echo
2111 command to write value into these files, thereby changing the default settings
2112 of the kernel.
2113 ------------------------------------------------------------------------------
2115 2.14 /proc/<pid>/io - Display the IO accounting fields
2116 -------------------------------------------------------
2118 This file contains IO statistics for each running process
2120 Example
2121 -------
2123 test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
2124 [1] 3828
2126 test:/tmp # cat /proc/3828/io
2127 rchar: 323934931
2128 wchar: 323929600
2129 syscr: 632687
2130 syscw: 632675
2131 read_bytes: 0
2132 write_bytes: 323932160
2133 cancelled_write_bytes: 0
2136 Description
2137 -----------
2139 rchar
2140 -----
2142 I/O counter: chars read
2143 The number of bytes which this task has caused to be read from storage. This
2144 is simply the sum of bytes which this process passed to read() and pread().
2145 It includes things like tty IO and it is unaffected by whether or not actual
2146 physical disk IO was required (the read might have been satisfied from
2147 pagecache)
2150 wchar
2151 -----
2153 I/O counter: chars written
2154 The number of bytes which this task has caused, or shall cause to be written
2155 to disk. Similar caveats apply here as with rchar.
2158 syscr
2159 -----
2161 I/O counter: read syscalls
2162 Attempt to count the number of read I/O operations, i.e. syscalls like read()
2163 and pread().
2166 syscw
2167 -----
2169 I/O counter: write syscalls
2170 Attempt to count the number of write I/O operations, i.e. syscalls like
2171 write() and pwrite().
2174 read_bytes
2175 ----------
2177 I/O counter: bytes read
2178 Attempt to count the number of bytes which this process really did cause to
2179 be fetched from the storage layer. Done at the submit_bio() level, so it is
2180 accurate for block-backed filesystems. <please add status regarding NFS and
2181 CIFS at a later time>
2184 write_bytes
2185 -----------
2187 I/O counter: bytes written
2188 Attempt to count the number of bytes which this process caused to be sent to
2189 the storage layer. This is done at page-dirtying time.
2192 cancelled_write_bytes
2193 ---------------------
2195 The big inaccuracy here is truncate. If a process writes 1MB to a file and
2196 then deletes the file, it will in fact perform no writeout. But it will have
2197 been accounted as having caused 1MB of write.
2198 In other words: The number of bytes which this process caused to not happen,
2199 by truncating pagecache. A task can cause "negative" IO too. If this task
2200 truncates some dirty pagecache, some IO which another task has been accounted
2201 for (in it's write_bytes) will not be happening. We _could_ just subtract that
2202 from the truncating task's write_bytes, but there is information loss in doing
2203 that.
2206 Note
2207 ----
2209 At its current implementation state, this is a bit racy on 32-bit machines: if
2210 process A reads process B's /proc/pid/io while process B is updating one of
2211 those 64-bit counters, process A could see an intermediate result.
2214 More information about this can be found within the taskstats documentation in
2215 Documentation/accounting.
2217 2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
2218 ---------------------------------------------------------------
2219 When a process is dumped, all anonymous memory is written to a core file as
2220 long as the size of the core file isn't limited. But sometimes we don't want
2221 to dump some memory segments, for example, huge shared memory. Conversely,
2222 sometimes we want to save file-backed memory segments into a core file, not
2223 only the individual files.
2225 /proc/<pid>/coredump_filter allows you to customize which memory segments
2226 will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
2227 of memory types. If a bit of the bitmask is set, memory segments of the
2228 corresponding memory type are dumped, otherwise they are not dumped.
2230 The following 4 memory types are supported:
2231 - (bit 0) anonymous private memory
2232 - (bit 1) anonymous shared memory
2233 - (bit 2) file-backed private memory
2234 - (bit 3) file-backed shared memory
2236 Note that MMIO pages such as frame buffer are never dumped and vDSO pages
2237 are always dumped regardless of the bitmask status.
2239 Default value of coredump_filter is 0x3; this means all anonymous memory
2240 segments are dumped.
2242 If you don't want to dump all shared memory segments attached to pid 1234,
2243 write 1 to the process's proc file.
2245 $ echo 0x1 > /proc/1234/coredump_filter
2247 When a new process is created, the process inherits the bitmask status from its
2248 parent. It is useful to set up coredump_filter before the program runs.
2249 For example:
2251 $ echo 0x7 > /proc/self/coredump_filter
2252 $ ./some_program
2254 ------------------------------------------------------------------------------