fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / drivers / i2c / chips / ds1374.c
blob8a2ff0c114d9db7460c3b8177d9dbec2472456fa
1 /*
2 * drivers/i2c/chips/ds1374.c
4 * I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock
6 * Author: Randy Vinson <rvinson@mvista.com>
8 * Based on the m41t00.c by Mark Greer <mgreer@mvista.com>
10 * 2005 (c) MontaVista Software, Inc. This file is licensed under
11 * the terms of the GNU General Public License version 2. This program
12 * is licensed "as is" without any warranty of any kind, whether express
13 * or implied.
16 * This i2c client/driver wedges between the drivers/char/genrtc.c RTC
17 * interface and the SMBus interface of the i2c subsystem.
18 * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
19 * recommened in .../Documentation/i2c/writing-clients section
20 * "Sending and receiving", using SMBus level communication is preferred.
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/interrupt.h>
26 #include <linux/i2c.h>
27 #include <linux/rtc.h>
28 #include <linux/bcd.h>
29 #include <linux/mutex.h>
30 #include <linux/workqueue.h>
32 #define DS1374_REG_TOD0 0x00
33 #define DS1374_REG_TOD1 0x01
34 #define DS1374_REG_TOD2 0x02
35 #define DS1374_REG_TOD3 0x03
36 #define DS1374_REG_WDALM0 0x04
37 #define DS1374_REG_WDALM1 0x05
38 #define DS1374_REG_WDALM2 0x06
39 #define DS1374_REG_CR 0x07
40 #define DS1374_REG_SR 0x08
41 #define DS1374_REG_SR_OSF 0x80
42 #define DS1374_REG_TCR 0x09
44 #define DS1374_DRV_NAME "ds1374"
46 static DEFINE_MUTEX(ds1374_mutex);
48 static struct i2c_driver ds1374_driver;
49 static struct i2c_client *save_client;
51 static unsigned short ignore[] = { I2C_CLIENT_END };
52 static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
54 static struct i2c_client_address_data addr_data = {
55 .normal_i2c = normal_addr,
56 .probe = ignore,
57 .ignore = ignore,
60 static ulong ds1374_read_rtc(void)
62 ulong time = 0;
63 int reg = DS1374_REG_WDALM0;
65 while (reg--) {
66 s32 tmp;
67 if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) {
68 dev_warn(&save_client->dev,
69 "can't read from rtc chip\n");
70 return 0;
72 time = (time << 8) | (tmp & 0xff);
74 return time;
77 static void ds1374_write_rtc(ulong time)
79 int reg;
81 for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) {
82 if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff)
83 < 0) {
84 dev_warn(&save_client->dev,
85 "can't write to rtc chip\n");
86 break;
88 time = time >> 8;
92 static void ds1374_check_rtc_status(void)
94 s32 tmp;
96 tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR);
97 if (tmp < 0) {
98 dev_warn(&save_client->dev,
99 "can't read status from rtc chip\n");
100 return;
102 if (tmp & DS1374_REG_SR_OSF) {
103 dev_warn(&save_client->dev,
104 "oscillator discontinuity flagged, time unreliable\n");
105 tmp &= ~DS1374_REG_SR_OSF;
106 tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR,
107 tmp & 0xff);
108 if (tmp < 0)
109 dev_warn(&save_client->dev,
110 "can't clear discontinuity notification\n");
114 ulong ds1374_get_rtc_time(void)
116 ulong t1, t2;
117 int limit = 10; /* arbitrary retry limit */
119 mutex_lock(&ds1374_mutex);
122 * Since the reads are being performed one byte at a time using
123 * the SMBus vs a 4-byte i2c transfer, there is a chance that a
124 * carry will occur during the read. To detect this, 2 reads are
125 * performed and compared.
127 do {
128 t1 = ds1374_read_rtc();
129 t2 = ds1374_read_rtc();
130 } while (t1 != t2 && limit--);
132 mutex_unlock(&ds1374_mutex);
134 if (t1 != t2) {
135 dev_warn(&save_client->dev,
136 "can't get consistent time from rtc chip\n");
137 t1 = 0;
140 return t1;
143 static ulong new_time;
145 static void ds1374_set_work(struct work_struct *work)
147 ulong t1, t2;
148 int limit = 10; /* arbitrary retry limit */
150 t1 = new_time;
152 mutex_lock(&ds1374_mutex);
155 * Since the writes are being performed one byte at a time using
156 * the SMBus vs a 4-byte i2c transfer, there is a chance that a
157 * carry will occur during the write. To detect this, the write
158 * value is read back and compared.
160 do {
161 ds1374_write_rtc(t1);
162 t2 = ds1374_read_rtc();
163 } while (t1 != t2 && limit--);
165 mutex_unlock(&ds1374_mutex);
167 if (t1 != t2)
168 dev_warn(&save_client->dev,
169 "can't confirm time set from rtc chip\n");
172 static struct workqueue_struct *ds1374_workqueue;
174 static DECLARE_WORK(ds1374_work, ds1374_set_work);
176 int ds1374_set_rtc_time(ulong nowtime)
178 new_time = nowtime;
180 if (in_interrupt())
181 queue_work(ds1374_workqueue, &ds1374_work);
182 else
183 ds1374_set_work(NULL);
185 return 0;
189 *****************************************************************************
191 * Driver Interface
193 *****************************************************************************
195 static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
197 struct i2c_client *client;
198 int rc;
200 client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
201 if (!client)
202 return -ENOMEM;
204 strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
205 client->addr = addr;
206 client->adapter = adap;
207 client->driver = &ds1374_driver;
209 ds1374_workqueue = create_singlethread_workqueue("ds1374");
210 if (!ds1374_workqueue) {
211 kfree(client);
212 return -ENOMEM; /* most expected reason */
215 if ((rc = i2c_attach_client(client)) != 0) {
216 kfree(client);
217 return rc;
220 save_client = client;
222 ds1374_check_rtc_status();
224 return 0;
227 static int ds1374_attach(struct i2c_adapter *adap)
229 return i2c_probe(adap, &addr_data, ds1374_probe);
232 static int ds1374_detach(struct i2c_client *client)
234 int rc;
236 if ((rc = i2c_detach_client(client)) == 0) {
237 kfree(i2c_get_clientdata(client));
238 destroy_workqueue(ds1374_workqueue);
240 return rc;
243 static struct i2c_driver ds1374_driver = {
244 .driver = {
245 .name = DS1374_DRV_NAME,
247 .id = I2C_DRIVERID_DS1374,
248 .attach_adapter = ds1374_attach,
249 .detach_client = ds1374_detach,
252 static int __init ds1374_init(void)
254 return i2c_add_driver(&ds1374_driver);
257 static void __exit ds1374_exit(void)
259 i2c_del_driver(&ds1374_driver);
262 module_init(ds1374_init);
263 module_exit(ds1374_exit);
265 MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>");
266 MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver");
267 MODULE_LICENSE("GPL");