fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / drivers / scsi / sun3x_esp.c
blob80fb3f88af2edd937ebdf2df51e8f4efcca67ee3
1 /* sun3x_esp.c: EnhancedScsiProcessor Sun3x SCSI driver code.
3 * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
5 * Based on David S. Miller's esp driver
6 */
8 #include <linux/kernel.h>
9 #include <linux/types.h>
10 #include <linux/string.h>
11 #include <linux/slab.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/stat.h>
15 #include <linux/delay.h>
16 #include <linux/interrupt.h>
18 #include "scsi.h"
19 #include <scsi/scsi_host.h>
20 #include "NCR53C9x.h"
22 #include <asm/sun3x.h>
23 #include <asm/dvma.h>
24 #include <asm/irq.h>
26 static void dma_barrier(struct NCR_ESP *esp);
27 static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
28 static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
29 static void dma_drain(struct NCR_ESP *esp);
30 static void dma_invalidate(struct NCR_ESP *esp);
31 static void dma_dump_state(struct NCR_ESP *esp);
32 static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length);
33 static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length);
34 static void dma_ints_off(struct NCR_ESP *esp);
35 static void dma_ints_on(struct NCR_ESP *esp);
36 static int dma_irq_p(struct NCR_ESP *esp);
37 static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr);
38 static int dma_ports_p(struct NCR_ESP *esp);
39 static void dma_reset(struct NCR_ESP *esp);
40 static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
41 static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
42 static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
43 static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
44 static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
45 static void dma_advance_sg (Scsi_Cmnd *sp);
47 /* Detecting ESP chips on the machine. This is the simple and easy
48 * version.
50 int sun3x_esp_detect(struct scsi_host_template *tpnt)
52 struct NCR_ESP *esp;
53 struct ConfigDev *esp_dev;
55 esp_dev = 0;
56 esp = esp_allocate(tpnt, esp_dev, 0);
58 /* Do command transfer with DMA */
59 esp->do_pio_cmds = 0;
61 /* Required functions */
62 esp->dma_bytes_sent = &dma_bytes_sent;
63 esp->dma_can_transfer = &dma_can_transfer;
64 esp->dma_dump_state = &dma_dump_state;
65 esp->dma_init_read = &dma_init_read;
66 esp->dma_init_write = &dma_init_write;
67 esp->dma_ints_off = &dma_ints_off;
68 esp->dma_ints_on = &dma_ints_on;
69 esp->dma_irq_p = &dma_irq_p;
70 esp->dma_ports_p = &dma_ports_p;
71 esp->dma_setup = &dma_setup;
73 /* Optional functions */
74 esp->dma_barrier = &dma_barrier;
75 esp->dma_invalidate = &dma_invalidate;
76 esp->dma_drain = &dma_drain;
77 esp->dma_irq_entry = 0;
78 esp->dma_irq_exit = 0;
79 esp->dma_led_on = 0;
80 esp->dma_led_off = 0;
81 esp->dma_poll = &dma_poll;
82 esp->dma_reset = &dma_reset;
84 /* virtual DMA functions */
85 esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one;
86 esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl;
87 esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one;
88 esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl;
89 esp->dma_advance_sg = &dma_advance_sg;
91 /* SCSI chip speed */
92 esp->cfreq = 20000000;
93 esp->eregs = (struct ESP_regs *)(SUN3X_ESP_BASE);
94 esp->dregs = (void *)SUN3X_ESP_DMA;
96 esp->esp_command = (volatile unsigned char *)dvma_malloc(DVMA_PAGE_SIZE);
97 esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command);
99 esp->irq = 2;
100 if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
101 "SUN3X SCSI", esp->ehost)) {
102 esp_deallocate(esp);
103 return 0;
106 esp->scsi_id = 7;
107 esp->diff = 0;
109 esp_initialize(esp);
111 /* for reasons beyond my knowledge (and which should likely be fixed)
112 sync mode doesn't work on a 3/80 at 5mhz. but it does at 4. */
113 esp->sync_defp = 0x3f;
115 printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,
116 esps_in_use);
117 esps_running = esps_in_use;
118 return esps_in_use;
121 static void dma_do_drain(struct NCR_ESP *esp)
123 struct sparc_dma_registers *dregs =
124 (struct sparc_dma_registers *) esp->dregs;
126 int count = 500000;
128 while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0))
129 udelay(1);
131 if(!count) {
132 printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
135 dregs->cond_reg |= DMA_FIFO_STDRAIN;
137 count = 500000;
139 while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0))
140 udelay(1);
142 if(!count) {
143 printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
148 static void dma_barrier(struct NCR_ESP *esp)
150 struct sparc_dma_registers *dregs =
151 (struct sparc_dma_registers *) esp->dregs;
152 int count = 500000;
154 while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0))
155 udelay(1);
157 if(!count) {
158 printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
161 dregs->cond_reg &= ~(DMA_ENABLE);
164 /* This uses various DMA csr fields and the fifo flags count value to
165 * determine how many bytes were successfully sent/received by the ESP.
167 static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
169 struct sparc_dma_registers *dregs =
170 (struct sparc_dma_registers *) esp->dregs;
172 int rval = dregs->st_addr - esp->esp_command_dvma;
174 return rval - fifo_count;
177 static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
179 return sp->SCp.this_residual;
182 static void dma_drain(struct NCR_ESP *esp)
184 struct sparc_dma_registers *dregs =
185 (struct sparc_dma_registers *) esp->dregs;
186 int count = 500000;
188 if(dregs->cond_reg & DMA_FIFO_ISDRAIN) {
189 dregs->cond_reg |= DMA_FIFO_STDRAIN;
190 while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0))
191 udelay(1);
192 if(!count) {
193 printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
199 static void dma_invalidate(struct NCR_ESP *esp)
201 struct sparc_dma_registers *dregs =
202 (struct sparc_dma_registers *) esp->dregs;
204 __u32 tmp;
205 int count = 500000;
207 while(((tmp = dregs->cond_reg) & DMA_PEND_READ) && (--count > 0))
208 udelay(1);
210 if(!count) {
211 printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
214 dregs->cond_reg = tmp | DMA_FIFO_INV;
215 dregs->cond_reg &= ~DMA_FIFO_INV;
219 static void dma_dump_state(struct NCR_ESP *esp)
221 struct sparc_dma_registers *dregs =
222 (struct sparc_dma_registers *) esp->dregs;
224 ESPLOG(("esp%d: dma -- cond_reg<%08lx> addr<%08lx>\n",
225 esp->esp_id, dregs->cond_reg, dregs->st_addr));
228 static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length)
230 struct sparc_dma_registers *dregs =
231 (struct sparc_dma_registers *) esp->dregs;
233 dregs->st_addr = vaddress;
234 dregs->cond_reg |= (DMA_ST_WRITE | DMA_ENABLE);
237 static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length)
239 struct sparc_dma_registers *dregs =
240 (struct sparc_dma_registers *) esp->dregs;
242 /* Set up the DMA counters */
244 dregs->st_addr = vaddress;
245 dregs->cond_reg = ((dregs->cond_reg & ~(DMA_ST_WRITE)) | DMA_ENABLE);
248 static void dma_ints_off(struct NCR_ESP *esp)
250 DMA_INTSOFF((struct sparc_dma_registers *) esp->dregs);
253 static void dma_ints_on(struct NCR_ESP *esp)
255 DMA_INTSON((struct sparc_dma_registers *) esp->dregs);
258 static int dma_irq_p(struct NCR_ESP *esp)
260 return DMA_IRQ_P((struct sparc_dma_registers *) esp->dregs);
263 static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr)
265 int count = 50;
266 dma_do_drain(esp);
268 /* Wait till the first bits settle. */
269 while((*(volatile unsigned char *)vaddr == 0xff) && (--count > 0))
270 udelay(1);
272 if(!count) {
273 // printk("%s:%d timeout expire (data %02x)\n", __FILE__, __LINE__,
274 // esp_read(esp->eregs->esp_fdata));
275 //mach_halt();
276 vaddr[0] = esp_read(esp->eregs->esp_fdata);
277 vaddr[1] = esp_read(esp->eregs->esp_fdata);
282 static int dma_ports_p(struct NCR_ESP *esp)
284 return (((struct sparc_dma_registers *) esp->dregs)->cond_reg
285 & DMA_INT_ENAB);
288 /* Resetting various pieces of the ESP scsi driver chipset/buses. */
289 static void dma_reset(struct NCR_ESP *esp)
291 struct sparc_dma_registers *dregs =
292 (struct sparc_dma_registers *)esp->dregs;
294 /* Punt the DVMA into a known state. */
295 dregs->cond_reg |= DMA_RST_SCSI;
296 dregs->cond_reg &= ~(DMA_RST_SCSI);
297 DMA_INTSON(dregs);
300 static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
302 struct sparc_dma_registers *dregs =
303 (struct sparc_dma_registers *) esp->dregs;
304 unsigned long nreg = dregs->cond_reg;
306 // printk("dma_setup %c addr %08x cnt %08x\n",
307 // write ? 'W' : 'R', addr, count);
309 dma_do_drain(esp);
311 if(write)
312 nreg |= DMA_ST_WRITE;
313 else {
314 nreg &= ~(DMA_ST_WRITE);
317 nreg |= DMA_ENABLE;
318 dregs->cond_reg = nreg;
319 dregs->st_addr = addr;
322 static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
324 sp->SCp.have_data_in = dvma_map((unsigned long)sp->SCp.buffer,
325 sp->SCp.this_residual);
326 sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in);
329 static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
331 int sz = sp->SCp.buffers_residual;
332 struct scatterlist *sg = sp->SCp.buffer;
334 while (sz >= 0) {
335 sg[sz].dma_address = dvma_map((unsigned long)page_address(sg[sz].page) +
336 sg[sz].offset, sg[sz].length);
337 sz--;
339 sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dma_address);
342 static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
344 dvma_unmap((char *)sp->SCp.have_data_in);
347 static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
349 int sz = sp->use_sg - 1;
350 struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
352 while(sz >= 0) {
353 dvma_unmap((char *)sg[sz].dma_address);
354 sz--;
358 static void dma_advance_sg (Scsi_Cmnd *sp)
360 sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dma_address);
363 static int sun3x_esp_release(struct Scsi_Host *instance)
365 /* this code does not support being compiled as a module */
366 return 1;
370 static struct scsi_host_template driver_template = {
371 .proc_name = "sun3x_esp",
372 .proc_info = &esp_proc_info,
373 .name = "Sun ESP 100/100a/200",
374 .detect = sun3x_esp_detect,
375 .release = sun3x_esp_release,
376 .slave_alloc = esp_slave_alloc,
377 .slave_destroy = esp_slave_destroy,
378 .info = esp_info,
379 .queuecommand = esp_queue,
380 .eh_abort_handler = esp_abort,
381 .eh_bus_reset_handler = esp_reset,
382 .can_queue = 7,
383 .this_id = 7,
384 .sg_tablesize = SG_ALL,
385 .cmd_per_lun = 1,
386 .use_clustering = DISABLE_CLUSTERING,
390 #include "scsi_module.c"
392 MODULE_LICENSE("GPL");