drivers/usb/misc/berry_charge.c

   1 /*
   2  * USB BlackBerry charging module
   3  *
   4  * Copyright (C) 2007 Greg Kroah-Hartman <gregkh@suse.de>
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License as
   8  *      published by the Free Software Foundation, version 2.
   9  *
  10  * Information on how to switch configs was taken by the bcharge.cc file
  11  * created by the barry.sf.net project.
  12  *
  13  * bcharge.cc has the following copyright:
  14  *      Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/)
  15  * and is released under the GPLv2.
  16  *
  17  *
  18  */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/errno.h>
  22 #include <linux/init.h>
  23 #include <linux/slab.h>
  24 #include <linux/module.h>
  25 #include <linux/usb.h>
  26
  27 #define RIM_VENDOR              0x0fca
  28 #define BLACKBERRY              0x0001
  29 #define BLACKBERRY_PEARL_DUAL   0x0004
  30 #define BLACKBERRY_PEARL        0x0006
  31
  32 static int debug;
  33 static int pearl_dual_mode = 1;
  34
  35 #ifdef dbg
  36 #undef dbg
  37 #endif
  38 #define dbg(dev, format, arg...)                                \
  39         if (debug)                                              \
  40                 dev_printk(KERN_DEBUG , dev , format , ## arg)
  41
  42 static struct usb_device_id id_table [] = {
  43         { USB_DEVICE(RIM_VENDOR, BLACKBERRY) },
  44         { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL) },
  45         { USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL_DUAL) },
  46         { },                                    /* Terminating entry */
  47 };
  48 MODULE_DEVICE_TABLE(usb, id_table);
  49
  50 static int magic_charge(struct usb_device *udev)
  51 {
  52         char *dummy_buffer = kzalloc(2, GFP_KERNEL);
  53         int retval;
  54
  55         if (!dummy_buffer)
  56                 return -ENOMEM;
  57
  58         /* send two magic commands and then set the configuration.  The device
  59          * will then reset itself with the new power usage and should start
  60          * charging. */
  61
  62         /* Note, with testing, it only seems that the first message is really
  63          * needed (at least for the 8700c), but to be safe, we emulate what
  64          * other operating systems seem to be sending to their device.  We
  65          * really need to get some specs for this device to be sure about what
  66          * is going on here.
  67          */
  68         dbg(&udev->dev, "Sending first magic command\n");
  69         retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
  70                                  0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100);
  71         if (retval != 2) {
  72                 dev_err(&udev->dev, "First magic command failed: %d.\n",
  73                         retval);
  74                 goto exit;
  75         }
  76
  77         dbg(&udev->dev, "Sending second magic command\n");
  78         retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
  79                                  0xa2, 0x40, 0, 1, dummy_buffer, 0, 100);
  80         if (retval != 0) {
  81                 dev_err(&udev->dev, "Second magic command failed: %d.\n",
  82                         retval);
  83                 goto exit;
  84         }
  85
  86         dbg(&udev->dev, "Calling set_configuration\n");
  87         retval = usb_driver_set_configuration(udev, 1);
  88         if (retval)
  89                 dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
  90
  91 exit:
  92         kfree(dummy_buffer);
  93         return retval;
  94 }
  95
  96 static int magic_dual_mode(struct usb_device *udev)
  97 {
  98         char *dummy_buffer = kzalloc(2, GFP_KERNEL);
  99         int retval;
 100
 101         if (!dummy_buffer)
 102                 return -ENOMEM;
 103
 104         /* send magic command so that the Blackberry Pearl device exposes
 105          * two interfaces: both the USB mass-storage one and one which can
 106          * be used for database access. */
 107         dbg(&udev->dev, "Sending magic pearl command\n");
 108         retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 109                                  0xa9, 0xc0, 1, 1, dummy_buffer, 2, 100);
 110         dbg(&udev->dev, "Magic pearl command returned %d\n", retval);
 111
 112         dbg(&udev->dev, "Calling set_configuration\n");
 113         retval = usb_driver_set_configuration(udev, 1);
 114         if (retval)
 115                 dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
 116
 117         kfree(dummy_buffer);
 118         return retval;
 119 }
 120
 121 static int berry_probe(struct usb_interface *intf,
 122                        const struct usb_device_id *id)
 123 {
 124         struct usb_device *udev = interface_to_usbdev(intf);
 125
 126         dbg(&udev->dev, "Power is set to %dmA\n",
 127             udev->actconfig->desc.bMaxPower * 2);
 128
 129         /* check the power usage so we don't try to enable something that is
 130          * already enabled */
 131         if ((udev->actconfig->desc.bMaxPower * 2) == 500) {
 132                 dbg(&udev->dev, "device is already charging, power is "
 133                     "set to %dmA\n", udev->actconfig->desc.bMaxPower * 2);
 134                 return -ENODEV;
 135         }
 136
 137         /* turn the power on */
 138         magic_charge(udev);
 139
 140         if ((le16_to_cpu(udev->descriptor.idProduct) == BLACKBERRY_PEARL) &&
 141             (pearl_dual_mode))
 142                 magic_dual_mode(udev);
 143
 144         /* we don't really want to bind to the device, userspace programs can
 145          * handle the syncing just fine, so get outta here. */
 146         return -ENODEV;
 147 }
 148
 149 static void berry_disconnect(struct usb_interface *intf)
 150 {
 151 }
 152
 153 static struct usb_driver berry_driver = {
 154         .name =         "berry_charge",
 155         .probe =        berry_probe,
 156         .disconnect =   berry_disconnect,
 157         .id_table =     id_table,
 158 };
 159
 160 static int __init berry_init(void)
 161 {
 162         return usb_register(&berry_driver);
 163 }
 164
 165 static void __exit berry_exit(void)
 166 {
 167         usb_deregister(&berry_driver);
 168 }
 169
 170 module_init(berry_init);
 171 module_exit(berry_exit);
 172
 173 MODULE_LICENSE("GPL");
 174 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
 175 module_param(debug, bool, S_IRUGO | S_IWUSR);
 176 MODULE_PARM_DESC(debug, "Debug enabled or not");
 177 module_param(pearl_dual_mode, bool, S_IRUGO | S_IWUSR);
 178 MODULE_PARM_DESC(pearl_dual_mode, "Change Blackberry Pearl to run in dual mode");