fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / include / asm-blackfin / ptrace.h
blobb8346cd3a6f609018b7a0aae0db0f11fc0d33802
1 #ifndef _BFIN_PTRACE_H
2 #define _BFIN_PTRACE_H
4 /*
5 * GCC defines register number like this:
6 * -----------------------------
7 * 0 - 7 are data registers R0-R7
8 * 8 - 15 are address registers P0-P7
9 * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
10 * 32 - 33 A registers A0 & A1
11 * 34 - status register
12 * -----------------------------
14 * We follows above, except:
15 * 32-33 --- Low 32-bit of A0&1
16 * 34-35 --- High 8-bit of A0&1
19 #ifndef __ASSEMBLY__
21 /* this struct defines the way the registers are stored on the
22 stack during a system call. */
24 struct pt_regs {
25 long orig_pc;
26 long ipend;
27 long seqstat;
28 long rete;
29 long retn;
30 long retx;
31 long pc; /* PC == RETI */
32 long rets;
33 long reserved; /* Used as scratch during system calls */
34 long astat;
35 long lb1;
36 long lb0;
37 long lt1;
38 long lt0;
39 long lc1;
40 long lc0;
41 long a1w;
42 long a1x;
43 long a0w;
44 long a0x;
45 long b3;
46 long b2;
47 long b1;
48 long b0;
49 long l3;
50 long l2;
51 long l1;
52 long l0;
53 long m3;
54 long m2;
55 long m1;
56 long m0;
57 long i3;
58 long i2;
59 long i1;
60 long i0;
61 long usp;
62 long fp;
63 long p5;
64 long p4;
65 long p3;
66 long p2;
67 long p1;
68 long p0;
69 long r7;
70 long r6;
71 long r5;
72 long r4;
73 long r3;
74 long r2;
75 long r1;
76 long r0;
77 long orig_r0;
78 long orig_p0;
79 long syscfg;
82 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
83 #define PTRACE_GETREGS 12
84 #define PTRACE_SETREGS 13 /* ptrace signal */
86 #ifdef CONFIG_BINFMT_ELF_FDPIC
87 #define PTRACE_GETFDPIC 31
88 #define PTRACE_GETFDPIC_EXEC 0
89 #define PTRACE_GETFDPIC_INTERP 1
90 #endif
92 #define PS_S (0x0002)
94 /* user_mode returns true if only one bit is set in IPEND, other than the
95 master interrupt enable. */
96 #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
97 #define instruction_pointer(regs) ((regs)->pc)
98 #define profile_pc(regs) instruction_pointer(regs)
99 extern void show_regs(struct pt_regs *);
101 #endif /* __ASSEMBLY__ */
104 * Offsets used by 'ptrace' system call interface.
107 #define PT_R0 204
108 #define PT_R1 200
109 #define PT_R2 196
110 #define PT_R3 192
111 #define PT_R4 188
112 #define PT_R5 184
113 #define PT_R6 180
114 #define PT_R7 176
115 #define PT_P0 172
116 #define PT_P1 168
117 #define PT_P2 164
118 #define PT_P3 160
119 #define PT_P4 156
120 #define PT_P5 152
121 #define PT_FP 148
122 #define PT_USP 144
123 #define PT_I0 140
124 #define PT_I1 136
125 #define PT_I2 132
126 #define PT_I3 128
127 #define PT_M0 124
128 #define PT_M1 120
129 #define PT_M2 116
130 #define PT_M3 112
131 #define PT_L0 108
132 #define PT_L1 104
133 #define PT_L2 100
134 #define PT_L3 96
135 #define PT_B0 92
136 #define PT_B1 88
137 #define PT_B2 84
138 #define PT_B3 80
139 #define PT_A0X 76
140 #define PT_A0W 72
141 #define PT_A1X 68
142 #define PT_A1W 64
143 #define PT_LC0 60
144 #define PT_LC1 56
145 #define PT_LT0 52
146 #define PT_LT1 48
147 #define PT_LB0 44
148 #define PT_LB1 40
149 #define PT_ASTAT 36
150 #define PT_RESERVED 32
151 #define PT_RETS 28
152 #define PT_PC 24
153 #define PT_RETX 20
154 #define PT_RETN 16
155 #define PT_RETE 12
156 #define PT_SEQSTAT 8
157 #define PT_IPEND 4
159 #define PT_SYSCFG 216
160 #define PT_TEXT_ADDR 220
161 #define PT_TEXT_END_ADDR 224
162 #define PT_DATA_ADDR 228
163 #define PT_FDPIC_EXEC 232
164 #define PT_FDPIC_INTERP 236
166 #endif /* _BFIN_PTRACE_H */