fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / include / asm-m68knommu / commproc.h
blob0161ebb5d883f903e9bef07371ba2dbd5b79331f
2 /*
3 * 68360 Communication Processor Module.
4 * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
5 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
7 * This file contains structures and information for the communication
8 * processor channels. Some CPM control and status is available
9 * through the 68360 internal memory map. See include/asm/360_immap.h for details.
10 * This file is not a complete map of all of the 360 QUICC's capabilities
12 * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
13 * bytes of the DP RAM and relocates the I2C parameter area to the
14 * IDMA1 space. The remaining DP RAM is available for buffer descriptors
15 * or other use.
17 #ifndef __CPM_360__
18 #define __CPM_360__
21 /* CPM Command register masks: */
22 #define CPM_CR_RST ((ushort)0x8000)
23 #define CPM_CR_OPCODE ((ushort)0x0f00)
24 #define CPM_CR_CHAN ((ushort)0x00f0)
25 #define CPM_CR_FLG ((ushort)0x0001)
27 /* CPM Command set (opcodes): */
28 #define CPM_CR_INIT_TRX ((ushort)0x0000)
29 #define CPM_CR_INIT_RX ((ushort)0x0001)
30 #define CPM_CR_INIT_TX ((ushort)0x0002)
31 #define CPM_CR_HUNT_MODE ((ushort)0x0003)
32 #define CPM_CR_STOP_TX ((ushort)0x0004)
33 #define CPM_CR_GRSTOP_TX ((ushort)0x0005)
34 #define CPM_CR_RESTART_TX ((ushort)0x0006)
35 #define CPM_CR_CLOSE_RXBD ((ushort)0x0007)
36 #define CPM_CR_SET_GADDR ((ushort)0x0008)
37 #define CPM_CR_GCI_TIMEOUT ((ushort)0x0009)
38 #define CPM_CR_GCI_ABORT ((ushort)0x000a)
39 #define CPM_CR_RESET_BCS ((ushort)0x000a)
41 /* CPM Channel numbers. */
42 #define CPM_CR_CH_SCC1 ((ushort)0x0000)
43 #define CPM_CR_CH_SCC2 ((ushort)0x0004)
44 #define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */
45 #define CPM_CR_CH_TMR ((ushort)0x0005)
46 #define CPM_CR_CH_SCC3 ((ushort)0x0008)
47 #define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */
48 #define CPM_CR_CH_IDMA1 ((ushort)0x0009)
49 #define CPM_CR_CH_SCC4 ((ushort)0x000c)
50 #define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */
51 #define CPM_CR_CH_IDMA2 ((ushort)0x000d)
54 #define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
56 #if 1 /* mleslie: I dinna think we have any such restrictions on
57 * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
59 /* The dual ported RAM is multi-functional. Some areas can be (and are
60 * being) used for microcode. There is an area that can only be used
61 * as data ram for buffer descriptors, which is all we use right now.
62 * Currently the first 512 and last 256 bytes are used for microcode.
64 /* mleslie: The uCquicc board is using no extra microcode in DPRAM */
65 #define CPM_DATAONLY_BASE ((uint)0x0000)
66 #define CPM_DATAONLY_SIZE ((uint)0x0800)
67 #define CPM_DP_NOSPACE ((uint)0x7fffffff)
69 #endif
72 /* Export the base address of the communication processor registers
73 * and dual port ram. */
74 /* extern cpm360_t *cpmp; */ /* Pointer to comm processor */
75 extern QUICC *pquicc;
76 uint m360_cpm_dpalloc(uint size);
77 /* void *m360_cpm_hostalloc(uint size); */
78 void m360_cpm_setbrg(uint brg, uint rate);
80 #if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */
81 /* Buffer descriptors used by many of the CPM protocols. */
82 typedef struct cpm_buf_desc {
83 ushort cbd_sc; /* Status and Control */
84 ushort cbd_datlen; /* Data length in buffer */
85 uint cbd_bufaddr; /* Buffer address in host memory */
86 } cbd_t;
87 #endif
90 /* rx bd status/control bits */
91 #define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
92 #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */
93 #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
94 #define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */
96 #define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */
97 #define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */
99 #define BD_SC_CM ((ushort)0x0200) /* Continous mode */
100 #define BD_SC_ID ((ushort)0x0100) /* Received too many idles */
102 #define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */
103 #define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */
105 #define BD_SC_BR ((ushort)0x0020) /* Break received */
106 #define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */
108 #define BD_SC_FR ((ushort)0x0010) /* Framing error */
109 #define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */
111 #define BD_SC_PR ((ushort)0x0008) /* Parity error */
112 #define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */
114 #define BD_SC_OV ((ushort)0x0002) /* Overrun */
115 #define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
117 /* tx bd status/control bits (as differ from rx bd) */
118 #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
119 #define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
120 #define BD_SC_P ((ushort)0x0100) /* xmt preamble */
121 #define BD_SC_UN ((ushort)0x0002) /* Underrun */
126 /* Parameter RAM offsets. */
130 /* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
131 * In 2.0, we use a more structured C struct map of DPRAM, and so
132 * instead, we need only a parameter ram `slot' */
134 #define PRSLOT_SCC1 0
135 #define PRSLOT_SCC2 1
136 #define PRSLOT_SCC3 2
137 #define PRSLOT_SMC1 2
138 #define PRSLOT_SCC4 3
139 #define PRSLOT_SMC2 3
142 /* #define PROFF_SCC1 ((uint)0x0000) */
143 /* #define PROFF_SCC2 ((uint)0x0100) */
144 /* #define PROFF_SCC3 ((uint)0x0200) */
145 /* #define PROFF_SMC1 ((uint)0x0280) */
146 /* #define PROFF_SCC4 ((uint)0x0300) */
147 /* #define PROFF_SMC2 ((uint)0x0380) */
150 /* Define enough so I can at least use the serial port as a UART.
151 * The MBX uses SMC1 as the host serial port.
153 typedef struct smc_uart {
154 ushort smc_rbase; /* Rx Buffer descriptor base address */
155 ushort smc_tbase; /* Tx Buffer descriptor base address */
156 u_char smc_rfcr; /* Rx function code */
157 u_char smc_tfcr; /* Tx function code */
158 ushort smc_mrblr; /* Max receive buffer length */
159 uint smc_rstate; /* Internal */
160 uint smc_idp; /* Internal */
161 ushort smc_rbptr; /* Internal */
162 ushort smc_ibc; /* Internal */
163 uint smc_rxtmp; /* Internal */
164 uint smc_tstate; /* Internal */
165 uint smc_tdp; /* Internal */
166 ushort smc_tbptr; /* Internal */
167 ushort smc_tbc; /* Internal */
168 uint smc_txtmp; /* Internal */
169 ushort smc_maxidl; /* Maximum idle characters */
170 ushort smc_tmpidl; /* Temporary idle counter */
171 ushort smc_brklen; /* Last received break length */
172 ushort smc_brkec; /* rcv'd break condition counter */
173 ushort smc_brkcr; /* xmt break count register */
174 ushort smc_rmask; /* Temporary bit mask */
175 } smc_uart_t;
177 /* Function code bits.
179 #define SMC_EB ((u_char)0x10) /* Set big endian byte order */
181 /* SMC uart mode register.
183 #define SMCMR_REN ((ushort)0x0001)
184 #define SMCMR_TEN ((ushort)0x0002)
185 #define SMCMR_DM ((ushort)0x000c)
186 #define SMCMR_SM_GCI ((ushort)0x0000)
187 #define SMCMR_SM_UART ((ushort)0x0020)
188 #define SMCMR_SM_TRANS ((ushort)0x0030)
189 #define SMCMR_SM_MASK ((ushort)0x0030)
190 #define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
191 #define SMCMR_REVD SMCMR_PM_EVEN
192 #define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
193 #define SMCMR_BS SMCMR_PEN
194 #define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
195 #define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
196 #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
198 /* SMC2 as Centronics parallel printer. It is half duplex, in that
199 * it can only receive or transmit. The parameter ram values for
200 * each direction are either unique or properly overlap, so we can
201 * include them in one structure.
203 typedef struct smc_centronics {
204 ushort scent_rbase;
205 ushort scent_tbase;
206 u_char scent_cfcr;
207 u_char scent_smask;
208 ushort scent_mrblr;
209 uint scent_rstate;
210 uint scent_r_ptr;
211 ushort scent_rbptr;
212 ushort scent_r_cnt;
213 uint scent_rtemp;
214 uint scent_tstate;
215 uint scent_t_ptr;
216 ushort scent_tbptr;
217 ushort scent_t_cnt;
218 uint scent_ttemp;
219 ushort scent_max_sl;
220 ushort scent_sl_cnt;
221 ushort scent_character1;
222 ushort scent_character2;
223 ushort scent_character3;
224 ushort scent_character4;
225 ushort scent_character5;
226 ushort scent_character6;
227 ushort scent_character7;
228 ushort scent_character8;
229 ushort scent_rccm;
230 ushort scent_rccr;
231 } smc_cent_t;
233 /* Centronics Status Mask Register.
235 #define SMC_CENT_F ((u_char)0x08)
236 #define SMC_CENT_PE ((u_char)0x04)
237 #define SMC_CENT_S ((u_char)0x02)
239 /* SMC Event and Mask register.
241 #define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
242 #define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
243 #define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
244 #define SMCM_BSY ((unsigned char)0x04)
245 #define SMCM_TX ((unsigned char)0x02)
246 #define SMCM_RX ((unsigned char)0x01)
248 /* Baud rate generators.
250 #define CPM_BRG_RST ((uint)0x00020000)
251 #define CPM_BRG_EN ((uint)0x00010000)
252 #define CPM_BRG_EXTC_INT ((uint)0x00000000)
253 #define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
254 #define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
255 #define CPM_BRG_ATB ((uint)0x00002000)
256 #define CPM_BRG_CD_MASK ((uint)0x00001ffe)
257 #define CPM_BRG_DIV16 ((uint)0x00000001)
259 /* SCCs.
261 #define SCC_GSMRH_IRP ((uint)0x00040000)
262 #define SCC_GSMRH_GDE ((uint)0x00010000)
263 #define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
264 #define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
265 #define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
266 #define SCC_GSMRH_REVD ((uint)0x00002000)
267 #define SCC_GSMRH_TRX ((uint)0x00001000)
268 #define SCC_GSMRH_TTX ((uint)0x00000800)
269 #define SCC_GSMRH_CDP ((uint)0x00000400)
270 #define SCC_GSMRH_CTSP ((uint)0x00000200)
271 #define SCC_GSMRH_CDS ((uint)0x00000100)
272 #define SCC_GSMRH_CTSS ((uint)0x00000080)
273 #define SCC_GSMRH_TFL ((uint)0x00000040)
274 #define SCC_GSMRH_RFW ((uint)0x00000020)
275 #define SCC_GSMRH_TXSY ((uint)0x00000010)
276 #define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
277 #define SCC_GSMRH_SYNL8 ((uint)0x00000008)
278 #define SCC_GSMRH_SYNL4 ((uint)0x00000004)
279 #define SCC_GSMRH_RTSM ((uint)0x00000002)
280 #define SCC_GSMRH_RSYN ((uint)0x00000001)
282 #define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
283 #define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
284 #define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
285 #define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
286 #define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
287 #define SCC_GSMRL_TCI ((uint)0x10000000)
288 #define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
289 #define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
290 #define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
291 #define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
292 #define SCC_GSMRL_RINV ((uint)0x02000000)
293 #define SCC_GSMRL_TINV ((uint)0x01000000)
294 #define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
295 #define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
296 #define SCC_GSMRL_TPL_48 ((uint)0x00800000)
297 #define SCC_GSMRL_TPL_32 ((uint)0x00600000)
298 #define SCC_GSMRL_TPL_16 ((uint)0x00400000)
299 #define SCC_GSMRL_TPL_8 ((uint)0x00200000)
300 #define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
301 #define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
302 #define SCC_GSMRL_TPP_01 ((uint)0x00100000)
303 #define SCC_GSMRL_TPP_10 ((uint)0x00080000)
304 #define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
305 #define SCC_GSMRL_TEND ((uint)0x00040000)
306 #define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
307 #define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
308 #define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
309 #define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
310 #define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
311 #define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
312 #define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
313 #define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
314 #define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
315 #define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
316 #define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
317 #define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
318 #define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
319 #define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
320 #define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
321 #define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
322 #define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
323 #define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
324 #define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
325 #define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
326 #define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
327 #define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
328 #define SCC_GSMRL_ENR ((uint)0x00000020)
329 #define SCC_GSMRL_ENT ((uint)0x00000010)
330 #define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
331 #define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
332 #define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
333 #define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
334 #define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
335 #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
336 #define SCC_GSMRL_MODE_UART ((uint)0x00000004)
337 #define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
338 #define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
339 #define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
341 #define SCC_TODR_TOD ((ushort)0x8000)
343 /* SCC Event and Mask register.
345 #define SCCM_TXE ((unsigned char)0x10)
346 #define SCCM_BSY ((unsigned char)0x04)
347 #define SCCM_TX ((unsigned char)0x02)
348 #define SCCM_RX ((unsigned char)0x01)
350 typedef struct scc_param {
351 ushort scc_rbase; /* Rx Buffer descriptor base address */
352 ushort scc_tbase; /* Tx Buffer descriptor base address */
353 u_char scc_rfcr; /* Rx function code */
354 u_char scc_tfcr; /* Tx function code */
355 ushort scc_mrblr; /* Max receive buffer length */
356 uint scc_rstate; /* Internal */
357 uint scc_idp; /* Internal */
358 ushort scc_rbptr; /* Internal */
359 ushort scc_ibc; /* Internal */
360 uint scc_rxtmp; /* Internal */
361 uint scc_tstate; /* Internal */
362 uint scc_tdp; /* Internal */
363 ushort scc_tbptr; /* Internal */
364 ushort scc_tbc; /* Internal */
365 uint scc_txtmp; /* Internal */
366 uint scc_rcrc; /* Internal */
367 uint scc_tcrc; /* Internal */
368 } sccp_t;
371 /* Function code bits.
373 #define SCC_EB ((u_char)0x10) /* Set big endian byte order */
374 #define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
376 /* CPM Ethernet through SCC1.
378 typedef struct scc_enet {
379 sccp_t sen_genscc;
380 uint sen_cpres; /* Preset CRC */
381 uint sen_cmask; /* Constant mask for CRC */
382 uint sen_crcec; /* CRC Error counter */
383 uint sen_alec; /* alignment error counter */
384 uint sen_disfc; /* discard frame counter */
385 ushort sen_pads; /* Tx short frame pad character */
386 ushort sen_retlim; /* Retry limit threshold */
387 ushort sen_retcnt; /* Retry limit counter */
388 ushort sen_maxflr; /* maximum frame length register */
389 ushort sen_minflr; /* minimum frame length register */
390 ushort sen_maxd1; /* maximum DMA1 length */
391 ushort sen_maxd2; /* maximum DMA2 length */
392 ushort sen_maxd; /* Rx max DMA */
393 ushort sen_dmacnt; /* Rx DMA counter */
394 ushort sen_maxb; /* Max BD byte count */
395 ushort sen_gaddr1; /* Group address filter */
396 ushort sen_gaddr2;
397 ushort sen_gaddr3;
398 ushort sen_gaddr4;
399 uint sen_tbuf0data0; /* Save area 0 - current frame */
400 uint sen_tbuf0data1; /* Save area 1 - current frame */
401 uint sen_tbuf0rba; /* Internal */
402 uint sen_tbuf0crc; /* Internal */
403 ushort sen_tbuf0bcnt; /* Internal */
404 ushort sen_paddrh; /* physical address (MSB) */
405 ushort sen_paddrm;
406 ushort sen_paddrl; /* physical address (LSB) */
407 ushort sen_pper; /* persistence */
408 ushort sen_rfbdptr; /* Rx first BD pointer */
409 ushort sen_tfbdptr; /* Tx first BD pointer */
410 ushort sen_tlbdptr; /* Tx last BD pointer */
411 uint sen_tbuf1data0; /* Save area 0 - current frame */
412 uint sen_tbuf1data1; /* Save area 1 - current frame */
413 uint sen_tbuf1rba; /* Internal */
414 uint sen_tbuf1crc; /* Internal */
415 ushort sen_tbuf1bcnt; /* Internal */
416 ushort sen_txlen; /* Tx Frame length counter */
417 ushort sen_iaddr1; /* Individual address filter */
418 ushort sen_iaddr2;
419 ushort sen_iaddr3;
420 ushort sen_iaddr4;
421 ushort sen_boffcnt; /* Backoff counter */
423 /* NOTE: Some versions of the manual have the following items
424 * incorrectly documented. Below is the proper order.
426 ushort sen_taddrh; /* temp address (MSB) */
427 ushort sen_taddrm;
428 ushort sen_taddrl; /* temp address (LSB) */
429 } scc_enet_t;
433 #if defined (CONFIG_UCQUICC)
434 /* uCquicc has the following signals connected to Ethernet:
435 * 68360 - lxt905
436 * PA0/RXD1 - rxd
437 * PA1/TXD1 - txd
438 * PA8/CLK1 - tclk
439 * PA9/CLK2 - rclk
440 * PC0/!RTS1 - t_en
441 * PC1/!CTS1 - col
442 * PC5/!CD1 - cd
444 #define PA_ENET_RXD PA_RXD1
445 #define PA_ENET_TXD PA_TXD1
446 #define PA_ENET_TCLK PA_CLK1
447 #define PA_ENET_RCLK PA_CLK2
448 #define PC_ENET_TENA PC_RTS1
449 #define PC_ENET_CLSN PC_CTS1
450 #define PC_ENET_RENA PC_CD1
452 /* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
453 * SCC1.
455 #define SICR_ENET_MASK ((uint)0x000000ff)
456 #define SICR_ENET_CLKRT ((uint)0x0000002c)
458 #endif /* config_ucquicc */
461 #ifdef MBX
462 /* Bits in parallel I/O port registers that have to be set/cleared
463 * to configure the pins for SCC1 use. The TCLK and RCLK seem unique
464 * to the MBX860 board. Any two of the four available clocks could be
465 * used, and the MPC860 cookbook manual has an example using different
466 * clock pins.
468 #define PA_ENET_RXD ((ushort)0x0001)
469 #define PA_ENET_TXD ((ushort)0x0002)
470 #define PA_ENET_TCLK ((ushort)0x0200)
471 #define PA_ENET_RCLK ((ushort)0x0800)
472 #define PC_ENET_TENA ((ushort)0x0001)
473 #define PC_ENET_CLSN ((ushort)0x0010)
474 #define PC_ENET_RENA ((ushort)0x0020)
476 /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
477 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
479 #define SICR_ENET_MASK ((uint)0x000000ff)
480 #define SICR_ENET_CLKRT ((uint)0x0000003d)
481 #endif
483 #ifdef CONFIG_RPXLITE
484 /* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
485 * this may be unique to the RPX-Lite configuration.
486 * Note TENA is on Port B.
488 #define PA_ENET_RXD ((ushort)0x0004)
489 #define PA_ENET_TXD ((ushort)0x0008)
490 #define PA_ENET_TCLK ((ushort)0x0200)
491 #define PA_ENET_RCLK ((ushort)0x0800)
492 #define PB_ENET_TENA ((uint)0x00002000)
493 #define PC_ENET_CLSN ((ushort)0x0040)
494 #define PC_ENET_RENA ((ushort)0x0080)
496 #define SICR_ENET_MASK ((uint)0x0000ff00)
497 #define SICR_ENET_CLKRT ((uint)0x00003d00)
498 #endif
500 #ifdef CONFIG_BSEIP
501 /* This ENET stuff is for the MPC823 with ethernet on SCC2.
502 * This is unique to the BSE ip-Engine board.
504 #define PA_ENET_RXD ((ushort)0x0004)
505 #define PA_ENET_TXD ((ushort)0x0008)
506 #define PA_ENET_TCLK ((ushort)0x0100)
507 #define PA_ENET_RCLK ((ushort)0x0200)
508 #define PB_ENET_TENA ((uint)0x00002000)
509 #define PC_ENET_CLSN ((ushort)0x0040)
510 #define PC_ENET_RENA ((ushort)0x0080)
512 /* BSE uses port B and C bits for PHY control also.
514 #define PB_BSE_POWERUP ((uint)0x00000004)
515 #define PB_BSE_FDXDIS ((uint)0x00008000)
516 #define PC_BSE_LOOPBACK ((ushort)0x0800)
518 #define SICR_ENET_MASK ((uint)0x0000ff00)
519 #define SICR_ENET_CLKRT ((uint)0x00002c00)
520 #endif
522 #ifdef CONFIG_RPXCLASSIC
523 /* Bits in parallel I/O port registers that have to be set/cleared
524 * to configure the pins for SCC1 use.
526 #define PA_ENET_RXD ((ushort)0x0001)
527 #define PA_ENET_TXD ((ushort)0x0002)
528 #define PA_ENET_TCLK ((ushort)0x0200)
529 #define PA_ENET_RCLK ((ushort)0x0800)
530 #define PB_ENET_TENA ((uint)0x00001000)
531 #define PC_ENET_CLSN ((ushort)0x0010)
532 #define PC_ENET_RENA ((ushort)0x0020)
534 /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
535 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
537 #define SICR_ENET_MASK ((uint)0x000000ff)
538 #define SICR_ENET_CLKRT ((uint)0x0000003d)
539 #endif
541 /* SCC Event register as used by Ethernet.
543 #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
544 #define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
545 #define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
546 #define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
547 #define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
548 #define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
550 /* SCC Mode Register (PMSR) as used by Ethernet.
552 #define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */
553 #define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */
554 #define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */
555 #define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */
556 #define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
557 #define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */
558 #define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
559 #define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */
560 #define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */
561 #define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */
562 #define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */
563 #define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */
564 #define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */
566 /* Buffer descriptor control/status used by Ethernet receive.
568 #define BD_ENET_RX_EMPTY ((ushort)0x8000)
569 #define BD_ENET_RX_WRAP ((ushort)0x2000)
570 #define BD_ENET_RX_INTR ((ushort)0x1000)
571 #define BD_ENET_RX_LAST ((ushort)0x0800)
572 #define BD_ENET_RX_FIRST ((ushort)0x0400)
573 #define BD_ENET_RX_MISS ((ushort)0x0100)
574 #define BD_ENET_RX_LG ((ushort)0x0020)
575 #define BD_ENET_RX_NO ((ushort)0x0010)
576 #define BD_ENET_RX_SH ((ushort)0x0008)
577 #define BD_ENET_RX_CR ((ushort)0x0004)
578 #define BD_ENET_RX_OV ((ushort)0x0002)
579 #define BD_ENET_RX_CL ((ushort)0x0001)
580 #define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
582 /* Buffer descriptor control/status used by Ethernet transmit.
584 #define BD_ENET_TX_READY ((ushort)0x8000)
585 #define BD_ENET_TX_PAD ((ushort)0x4000)
586 #define BD_ENET_TX_WRAP ((ushort)0x2000)
587 #define BD_ENET_TX_INTR ((ushort)0x1000)
588 #define BD_ENET_TX_LAST ((ushort)0x0800)
589 #define BD_ENET_TX_TC ((ushort)0x0400)
590 #define BD_ENET_TX_DEF ((ushort)0x0200)
591 #define BD_ENET_TX_HB ((ushort)0x0100)
592 #define BD_ENET_TX_LC ((ushort)0x0080)
593 #define BD_ENET_TX_RL ((ushort)0x0040)
594 #define BD_ENET_TX_RCMASK ((ushort)0x003c)
595 #define BD_ENET_TX_UN ((ushort)0x0002)
596 #define BD_ENET_TX_CSL ((ushort)0x0001)
597 #define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
599 /* SCC as UART
601 typedef struct scc_uart {
602 sccp_t scc_genscc;
603 uint scc_res1; /* Reserved */
604 uint scc_res2; /* Reserved */
605 ushort scc_maxidl; /* Maximum idle chars */
606 ushort scc_idlc; /* temp idle counter */
607 ushort scc_brkcr; /* Break count register */
608 ushort scc_parec; /* receive parity error counter */
609 ushort scc_frmec; /* receive framing error counter */
610 ushort scc_nosec; /* receive noise counter */
611 ushort scc_brkec; /* receive break condition counter */
612 ushort scc_brkln; /* last received break length */
613 ushort scc_uaddr1; /* UART address character 1 */
614 ushort scc_uaddr2; /* UART address character 2 */
615 ushort scc_rtemp; /* Temp storage */
616 ushort scc_toseq; /* Transmit out of sequence char */
617 ushort scc_char1; /* control character 1 */
618 ushort scc_char2; /* control character 2 */
619 ushort scc_char3; /* control character 3 */
620 ushort scc_char4; /* control character 4 */
621 ushort scc_char5; /* control character 5 */
622 ushort scc_char6; /* control character 6 */
623 ushort scc_char7; /* control character 7 */
624 ushort scc_char8; /* control character 8 */
625 ushort scc_rccm; /* receive control character mask */
626 ushort scc_rccr; /* receive control character register */
627 ushort scc_rlbc; /* receive last break character */
628 } scc_uart_t;
630 /* SCC Event and Mask registers when it is used as a UART.
632 #define UART_SCCM_GLR ((ushort)0x1000)
633 #define UART_SCCM_GLT ((ushort)0x0800)
634 #define UART_SCCM_AB ((ushort)0x0200)
635 #define UART_SCCM_IDL ((ushort)0x0100)
636 #define UART_SCCM_GRA ((ushort)0x0080)
637 #define UART_SCCM_BRKE ((ushort)0x0040)
638 #define UART_SCCM_BRKS ((ushort)0x0020)
639 #define UART_SCCM_CCR ((ushort)0x0008)
640 #define UART_SCCM_BSY ((ushort)0x0004)
641 #define UART_SCCM_TX ((ushort)0x0002)
642 #define UART_SCCM_RX ((ushort)0x0001)
644 /* The SCC PMSR when used as a UART.
646 #define SCU_PMSR_FLC ((ushort)0x8000)
647 #define SCU_PMSR_SL ((ushort)0x4000)
648 #define SCU_PMSR_CL ((ushort)0x3000)
649 #define SCU_PMSR_UM ((ushort)0x0c00)
650 #define SCU_PMSR_FRZ ((ushort)0x0200)
651 #define SCU_PMSR_RZS ((ushort)0x0100)
652 #define SCU_PMSR_SYN ((ushort)0x0080)
653 #define SCU_PMSR_DRT ((ushort)0x0040)
654 #define SCU_PMSR_PEN ((ushort)0x0010)
655 #define SCU_PMSR_RPM ((ushort)0x000c)
656 #define SCU_PMSR_REVP ((ushort)0x0008)
657 #define SCU_PMSR_TPM ((ushort)0x0003)
658 #define SCU_PMSR_TEVP ((ushort)0x0003)
660 /* CPM Transparent mode SCC.
662 typedef struct scc_trans {
663 sccp_t st_genscc;
664 uint st_cpres; /* Preset CRC */
665 uint st_cmask; /* Constant mask for CRC */
666 } scc_trans_t;
668 #define BD_SCC_TX_LAST ((ushort)0x0800)
672 /* CPM interrupts. There are nearly 32 interrupts generated by CPM
673 * channels or devices. All of these are presented to the PPC core
674 * as a single interrupt. The CPM interrupt handler dispatches its
675 * own handlers, in a similar fashion to the PPC core handler. We
676 * use the table as defined in the manuals (i.e. no special high
677 * priority and SCC1 == SCCa, etc...).
679 /* #define CPMVEC_NR 32 */
680 /* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */
681 /* #define CPMVEC_SCC1 ((ushort)0x1e) */
682 /* #define CPMVEC_SCC2 ((ushort)0x1d) */
683 /* #define CPMVEC_SCC3 ((ushort)0x1c) */
684 /* #define CPMVEC_SCC4 ((ushort)0x1b) */
685 /* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */
686 /* #define CPMVEC_TIMER1 ((ushort)0x19) */
687 /* #define CPMVEC_PIO_PC13 ((ushort)0x18) */
688 /* #define CPMVEC_PIO_PC12 ((ushort)0x17) */
689 /* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */
690 /* #define CPMVEC_IDMA1 ((ushort)0x15) */
691 /* #define CPMVEC_IDMA2 ((ushort)0x14) */
692 /* #define CPMVEC_TIMER2 ((ushort)0x12) */
693 /* #define CPMVEC_RISCTIMER ((ushort)0x11) */
694 /* #define CPMVEC_I2C ((ushort)0x10) */
695 /* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */
696 /* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */
697 /* #define CPMVEC_TIMER3 ((ushort)0x0c) */
698 /* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */
699 /* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */
700 /* #define CPMVEC_PIO_PC7 ((ushort)0x09) */
701 /* #define CPMVEC_TIMER4 ((ushort)0x07) */
702 /* #define CPMVEC_PIO_PC6 ((ushort)0x06) */
703 /* #define CPMVEC_SPI ((ushort)0x05) */
704 /* #define CPMVEC_SMC1 ((ushort)0x04) */
705 /* #define CPMVEC_SMC2 ((ushort)0x03) */
706 /* #define CPMVEC_PIO_PC5 ((ushort)0x02) */
707 /* #define CPMVEC_PIO_PC4 ((ushort)0x01) */
708 /* #define CPMVEC_ERROR ((ushort)0x00) */
710 extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
712 /* CPM interrupt configuration vector.
714 #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
715 #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
716 #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
717 #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
718 #define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
719 #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
720 #define CICR_IEN ((uint)0x00000080) /* Int. enable */
721 #define CICR_SPS ((uint)0x00000001) /* SCC Spread */
722 #endif /* __CPM_360__ */