fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / include / asm-m68knommu / m527xsim.h
blob1f63ab3fb3e671fd3b44ee731664c1a9c6709c86
1 /****************************************************************************/
3 /*
4 * m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
6 * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
7 */
9 /****************************************************************************/
10 #ifndef m527xsim_h
11 #define m527xsim_h
12 /****************************************************************************/
16 * Define the 5270/5271 SIM register set addresses.
18 #define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
19 #define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */
20 #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
21 #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
22 #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
23 #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
24 #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
25 #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
26 #define MCFINTC_IRLR 0x18 /* */
27 #define MCFINTC_IACKL 0x19 /* */
28 #define MCFINTC_ICR0 0x40 /* Base ICR register */
30 #define MCFINT_VECBASE 64 /* Vector base number */
31 #define MCFINT_UART0 13 /* Interrupt number for UART0 */
32 #define MCFINT_UART1 14 /* Interrupt number for UART1 */
33 #define MCFINT_UART2 15 /* Interrupt number for UART2 */
34 #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
37 * SDRAM configuration registers.
39 #ifdef CONFIG_M5271
40 #define MCFSIM_DCR 0x40 /* SDRAM control */
41 #define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
42 #define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
43 #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
44 #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
45 #endif
46 #ifdef CONFIG_M5275
47 #define MCFSIM_DMR 0x40 /* SDRAM mode */
48 #define MCFSIM_DCR 0x44 /* SDRAM control */
49 #define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */
50 #define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */
51 #define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */
52 #define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */
53 #define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */
54 #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
55 #endif
58 * GPIO pins setups to enable the UARTs.
60 #ifdef CONFIG_M5271
61 #define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */
62 #define UART0_ENABLE_MASK 0x000f
63 #define UART1_ENABLE_MASK 0x0ff0
64 #define UART2_ENABLE_MASK 0x3000
65 #endif
66 #ifdef CONFIG_M5275
67 #define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */
68 #define UART0_ENABLE_MASK 0x000f
69 #define UART1_ENABLE_MASK 0x00f0
70 #define UART2_ENABLE_MASK 0x3f00
71 #endif
73 /****************************************************************************/
74 #endif /* m527xsim_h */