fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / include / asm-m68knommu / mcfuart.h
blobdc0146c5258b745bc3ebf094029626dfbf35eaaa
1 /****************************************************************************/
3 /*
4 * mcfuart.h -- ColdFire internal UART support defines.
6 * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
7 * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
8 */
10 /****************************************************************************/
11 #ifndef mcfuart_h
12 #define mcfuart_h
13 /****************************************************************************/
17 * Define the base address of the UARTS within the MBAR address
18 * space.
20 #if defined(CONFIG_M5272)
21 #define MCFUART_BASE1 0x100 /* Base address of UART1 */
22 #define MCFUART_BASE2 0x140 /* Base address of UART2 */
23 #elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
24 #if defined(CONFIG_NETtel)
25 #define MCFUART_BASE1 0x180 /* Base address of UART1 */
26 #define MCFUART_BASE2 0x140 /* Base address of UART2 */
27 #else
28 #define MCFUART_BASE1 0x140 /* Base address of UART1 */
29 #define MCFUART_BASE2 0x180 /* Base address of UART2 */
30 #endif
31 #elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
32 #define MCFUART_BASE1 0x200 /* Base address of UART1 */
33 #define MCFUART_BASE2 0x240 /* Base address of UART2 */
34 #define MCFUART_BASE3 0x280 /* Base address of UART3 */
35 #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
36 #if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
37 #define MCFUART_BASE1 0x200 /* Base address of UART1 */
38 #define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
39 #else
40 #define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
41 #define MCFUART_BASE2 0x200 /* Base address of UART2 */
42 #endif
43 #elif defined(CONFIG_M520x)
44 #define MCFUART_BASE1 0x60000 /* Base address of UART1 */
45 #define MCFUART_BASE2 0x64000 /* Base address of UART2 */
46 #define MCFUART_BASE3 0x68000 /* Base address of UART2 */
47 #elif defined(CONFIG_M532x)
48 #define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
49 #define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
50 #define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
51 #endif
55 * Define the ColdFire UART register set addresses.
57 #define MCFUART_UMR 0x00 /* Mode register (r/w) */
58 #define MCFUART_USR 0x04 /* Status register (r) */
59 #define MCFUART_UCSR 0x04 /* Clock Select (w) */
60 #define MCFUART_UCR 0x08 /* Command register (w) */
61 #define MCFUART_URB 0x0c /* Receiver Buffer (r) */
62 #define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
63 #define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
64 #define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
65 #define MCFUART_UISR 0x14 /* Interrup Status (r) */
66 #define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
67 #define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
68 #define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
69 #ifdef CONFIG_M5272
70 #define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
71 #define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
72 #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
73 #else
74 #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
75 #endif
76 #define MCFUART_UIPR 0x34 /* Input Port (r) */
77 #define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
78 #define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
82 * Define bit flags in Mode Register 1 (MR1).
84 #define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
85 #define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
86 #define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
87 #define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
88 #define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
90 #define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
91 #define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
92 #define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
93 #define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
94 #define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
96 #define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
97 #define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
98 #define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
99 #define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
102 * Define bit flags in Mode Register 2 (MR2).
104 #define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
105 #define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
106 #define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
107 #define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
108 #define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
110 #define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
111 #define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
112 #define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
115 * Define bit flags in Status Register (USR).
117 #define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
118 #define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
119 #define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
120 #define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
121 #define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
122 #define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
123 #define MCFUART_USR_RXFULL 0x02 /* Receiver full */
124 #define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
126 #define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
127 MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
130 * Define bit flags in Clock Select Register (UCSR).
132 #define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
133 #define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
134 #define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
136 #define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
137 #define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
138 #define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
141 * Define bit flags in Command Register (UCR).
143 #define MCFUART_UCR_CMDNULL 0x00 /* No command */
144 #define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */
145 #define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */
146 #define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */
147 #define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */
148 #define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */
149 #define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
150 #define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
152 #define MCFUART_UCR_TXNULL 0x00 /* No TX command */
153 #define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
154 #define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
155 #define MCFUART_UCR_RXNULL 0x00 /* No RX command */
156 #define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
157 #define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
160 * Define bit flags in Input Port Change Register (UIPCR).
162 #define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
163 #define MCFUART_UIPCR_CTS 0x01 /* CTS value */
166 * Define bit flags in Input Port Register (UIP).
168 #define MCFUART_UIPR_CTS 0x01 /* CTS value */
171 * Define bit flags in Output Port Registers (UOP).
172 * Clear bit by writing to UOP0, set by writing to UOP1.
174 #define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
177 * Define bit flags in the Auxiliary Control Register (UACR).
179 #define MCFUART_UACR_IEC 0x01 /* Input enable control */
182 * Define bit flags in Interrupt Status Register (UISR).
183 * These same bits are used for the Interrupt Mask Register (UIMR).
185 #define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
186 #define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
187 #define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
188 #define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
190 #ifdef CONFIG_M5272
192 * Define bit flags in the Transmitter FIFO Register (UTF).
194 #define MCFUART_UTF_TXB 0x1f /* Transmitter data level */
195 #define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */
196 #define MCFUART_UTF_TXS 0xc0 /* Transmitter status */
199 * Define bit flags in the Receiver FIFO Register (URF).
201 #define MCFUART_URF_RXB 0x1f /* Receiver data level */
202 #define MCFUART_URF_FULL 0x20 /* Receiver fifo full */
203 #define MCFUART_URF_RXS 0xc0 /* Receiver status */
204 #endif
206 /****************************************************************************/
207 #endif /* mcfuart_h */