fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / include / asm-sh / floppy.h
blob3b59b3af777bb16214072e4cb732230c295dbbbd
1 /*
2 * Architecture specific parts of the Floppy driver
3 * include/asm-i386/floppy.h
5 * This file is subject to the terms and conditions of the GNU General Public
6 * License. See the file "COPYING" in the main directory of this archive
7 * for more details.
9 * Copyright (C) 1995
11 #ifndef __ASM_SH_FLOPPY_H
12 #define __ASM_SH_FLOPPY_H
14 #include <linux/vmalloc.h>
18 * The DMA channel used by the floppy controller cannot access data at
19 * addresses >= 16MB
21 * Went back to the 1MB limit, as some people had problems with the floppy
22 * driver otherwise. It doesn't matter much for performance anyway, as most
23 * floppy accesses go through the track buffer.
25 #define _CROSS_64KB(a,s,vdma) \
26 (!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
28 #define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
31 #define SW fd_routine[use_virtual_dma&1]
32 #define CSW fd_routine[can_use_virtual_dma & 1]
35 #define fd_inb(port) inb_p(port)
36 #define fd_outb(value,port) outb_p(value,port)
38 #define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
39 #define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
40 #define fd_enable_irq() enable_irq(FLOPPY_IRQ)
41 #define fd_disable_irq() disable_irq(FLOPPY_IRQ)
42 #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
43 #define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA)
44 #define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size)
45 #define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
47 #define FLOPPY_CAN_FALLBACK_ON_NODMA
49 static int virtual_dma_count;
50 static int virtual_dma_residue;
51 static char *virtual_dma_addr;
52 static int virtual_dma_mode;
53 static int doing_pdma;
55 static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
57 register unsigned char st;
59 #undef TRACE_FLPY_INT
61 #ifdef TRACE_FLPY_INT
62 static int calls=0;
63 static int bytes=0;
64 static int dma_wait=0;
65 #endif
66 if(!doing_pdma) {
67 floppy_interrupt(irq, dev_id, regs);
68 return;
71 #ifdef TRACE_FLPY_INT
72 if(!calls)
73 bytes = virtual_dma_count;
74 #endif
77 register int lcount;
78 register char *lptr;
80 st = 1;
81 for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
82 lcount; lcount--, lptr++) {
83 st=inb(virtual_dma_port+4) & 0xa0 ;
84 if(st != 0xa0)
85 break;
86 if(virtual_dma_mode)
87 outb_p(*lptr, virtual_dma_port+5);
88 else
89 *lptr = inb_p(virtual_dma_port+5);
91 virtual_dma_count = lcount;
92 virtual_dma_addr = lptr;
93 st = inb(virtual_dma_port+4);
96 #ifdef TRACE_FLPY_INT
97 calls++;
98 #endif
99 if(st == 0x20)
100 return;
101 if(!(st & 0x20)) {
102 virtual_dma_residue += virtual_dma_count;
103 virtual_dma_count=0;
104 #ifdef TRACE_FLPY_INT
105 printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
106 virtual_dma_count, virtual_dma_residue, calls, bytes,
107 dma_wait);
108 calls = 0;
109 dma_wait=0;
110 #endif
111 doing_pdma = 0;
112 floppy_interrupt(irq, dev_id, regs);
113 return;
115 #ifdef TRACE_FLPY_INT
116 if(!virtual_dma_count)
117 dma_wait++;
118 #endif
121 static void fd_disable_dma(void)
123 if(! (can_use_virtual_dma & 1))
124 disable_dma(FLOPPY_DMA);
125 doing_pdma = 0;
126 virtual_dma_residue += virtual_dma_count;
127 virtual_dma_count=0;
130 static int vdma_request_dma(unsigned int dmanr, const char * device_id)
132 return 0;
135 static void vdma_nop(unsigned int dummy)
140 static int vdma_get_dma_residue(unsigned int dummy)
142 return virtual_dma_count + virtual_dma_residue;
146 static int fd_request_irq(void)
148 if(can_use_virtual_dma)
149 return request_irq(FLOPPY_IRQ, floppy_hardint,
150 IRQF_DISABLED, "floppy", NULL);
151 else
152 return request_irq(FLOPPY_IRQ, floppy_interrupt,
153 IRQF_DISABLED, "floppy", NULL);
156 static unsigned long dma_mem_alloc(unsigned long size)
158 return __get_dma_pages(GFP_KERNEL,get_order(size));
162 static unsigned long vdma_mem_alloc(unsigned long size)
164 return (unsigned long) vmalloc(size);
168 #define nodma_mem_alloc(size) vdma_mem_alloc(size)
170 static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
172 if((unsigned int) addr >= (unsigned int) high_memory)
173 return vfree((void *)addr);
174 else
175 free_pages(addr, get_order(size));
178 #define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size)
180 static void _fd_chose_dma_mode(char *addr, unsigned long size)
182 if(can_use_virtual_dma == 2) {
183 if((unsigned int) addr >= (unsigned int) high_memory ||
184 virt_to_phys(addr) >= 0x10000000)
185 use_virtual_dma = 1;
186 else
187 use_virtual_dma = 0;
188 } else {
189 use_virtual_dma = can_use_virtual_dma & 1;
193 #define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
196 static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
198 doing_pdma = 1;
199 virtual_dma_port = io;
200 virtual_dma_mode = (mode == DMA_MODE_WRITE);
201 virtual_dma_addr = addr;
202 virtual_dma_count = size;
203 virtual_dma_residue = 0;
204 return 0;
207 static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
209 #ifdef FLOPPY_SANITY_CHECK
210 if (CROSS_64KB(addr, size)) {
211 printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
212 return -1;
214 #endif
216 dma_cache_wback_inv(addr, size);
218 /* actual, physical DMA */
219 doing_pdma = 0;
220 clear_dma_ff(FLOPPY_DMA);
221 set_dma_mode(FLOPPY_DMA,mode);
222 set_dma_addr(FLOPPY_DMA,virt_to_phys(addr));
223 set_dma_count(FLOPPY_DMA,size);
224 enable_dma(FLOPPY_DMA);
225 return 0;
228 static struct fd_routine_l {
229 int (*_request_dma)(unsigned int dmanr, const char * device_id);
230 void (*_free_dma)(unsigned int dmanr);
231 int (*_get_dma_residue)(unsigned int dummy);
232 unsigned long (*_dma_mem_alloc) (unsigned long size);
233 int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
234 } fd_routine[] = {
236 request_dma,
237 free_dma,
238 get_dma_residue,
239 dma_mem_alloc,
240 hard_dma_setup
243 vdma_request_dma,
244 vdma_nop,
245 vdma_get_dma_residue,
246 vdma_mem_alloc,
247 vdma_dma_setup
252 static int FDC1 = 0x3f0;
253 static int FDC2 = -1;
256 * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
257 * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
258 * coincides with another rtc CMOS user. Paul G.
260 #define FLOPPY0_TYPE (4)
261 #define FLOPPY1_TYPE (0)
263 #define N_FDC 2
264 #define N_DRIVE 8
266 #define FLOPPY_MOTOR_MASK 0xf0
268 #define AUTO_DMA
270 #define EXTRA_FLOPPY_PARAMS
272 #endif /* __ASM_SH_FLOPPY_H */