fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / include / asm-x86 / spinlock_64.h
blob88bf981e73cf45c084c66d6d60c25e066fa53340
1 #ifndef __ASM_SPINLOCK_H
2 #define __ASM_SPINLOCK_H
4 #include <asm/atomic.h>
5 #include <asm/rwlock.h>
6 #include <asm/page.h>
7 #include <asm/processor.h>
9 /*
10 * Your basic SMP spinlocks, allowing only a single CPU anywhere
12 * Simple spin lock operations. There are two variants, one clears IRQ's
13 * on the local processor, one does not.
15 * We make no fairness assumptions. They have a cost.
17 * (the type definitions are in asm/spinlock_types.h)
20 static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
22 return *(volatile signed int *)(&(lock)->slock) <= 0;
25 static inline void __raw_spin_lock(raw_spinlock_t *lock)
27 asm volatile(
28 "\n1:\t"
29 LOCK_PREFIX " ; decl %0\n\t"
30 "jns 2f\n"
31 "3:\n"
32 "rep;nop\n\t"
33 "cmpl $0,%0\n\t"
34 "jle 3b\n\t"
35 "jmp 1b\n"
36 "2:\t" : "=m" (lock->slock) : : "memory");
40 * Same as __raw_spin_lock, but reenable interrupts during spinning.
42 #ifndef CONFIG_PROVE_LOCKING
43 static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
45 asm volatile(
46 "\n1:\t"
47 LOCK_PREFIX " ; decl %0\n\t"
48 "jns 5f\n"
49 "testl $0x200, %1\n\t" /* interrupts were disabled? */
50 "jz 4f\n\t"
51 "sti\n"
52 "3:\t"
53 "rep;nop\n\t"
54 "cmpl $0, %0\n\t"
55 "jle 3b\n\t"
56 "cli\n\t"
57 "jmp 1b\n"
58 "4:\t"
59 "rep;nop\n\t"
60 "cmpl $0, %0\n\t"
61 "jg 1b\n\t"
62 "jmp 4b\n"
63 "5:\n\t"
64 : "+m" (lock->slock) : "r" ((unsigned)flags) : "memory");
66 #endif
68 static inline int __raw_spin_trylock(raw_spinlock_t *lock)
70 int oldval;
72 asm volatile(
73 "xchgl %0,%1"
74 :"=q" (oldval), "=m" (lock->slock)
75 :"0" (0) : "memory");
77 return oldval > 0;
80 static inline void __raw_spin_unlock(raw_spinlock_t *lock)
82 asm volatile("movl $1,%0" :"=m" (lock->slock) :: "memory");
85 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
87 while (__raw_spin_is_locked(lock))
88 cpu_relax();
92 * Read-write spinlocks, allowing multiple readers
93 * but only one writer.
95 * NOTE! it is quite common to have readers in interrupts
96 * but no interrupt writers. For those circumstances we
97 * can "mix" irq-safe locks - any writer needs to get a
98 * irq-safe write-lock, but readers can get non-irqsafe
99 * read-locks.
101 * On x86, we implement read-write locks as a 32-bit counter
102 * with the high bit (sign) being the "contended" bit.
105 static inline int __raw_read_can_lock(raw_rwlock_t *lock)
107 return (int)(lock)->lock > 0;
110 static inline int __raw_write_can_lock(raw_rwlock_t *lock)
112 return (lock)->lock == RW_LOCK_BIAS;
115 static inline void __raw_read_lock(raw_rwlock_t *rw)
117 asm volatile(LOCK_PREFIX "subl $1,(%0)\n\t"
118 "jns 1f\n"
119 "call __read_lock_failed\n"
120 "1:\n"
121 ::"D" (rw), "i" (RW_LOCK_BIAS) : "memory");
124 static inline void __raw_write_lock(raw_rwlock_t *rw)
126 asm volatile(LOCK_PREFIX "subl %1,(%0)\n\t"
127 "jz 1f\n"
128 "\tcall __write_lock_failed\n\t"
129 "1:\n"
130 ::"D" (rw), "i" (RW_LOCK_BIAS) : "memory");
133 static inline int __raw_read_trylock(raw_rwlock_t *lock)
135 atomic_t *count = (atomic_t *)lock;
136 atomic_dec(count);
137 if (atomic_read(count) >= 0)
138 return 1;
139 atomic_inc(count);
140 return 0;
143 static inline int __raw_write_trylock(raw_rwlock_t *lock)
145 atomic_t *count = (atomic_t *)lock;
146 if (atomic_sub_and_test(RW_LOCK_BIAS, count))
147 return 1;
148 atomic_add(RW_LOCK_BIAS, count);
149 return 0;
152 static inline void __raw_read_unlock(raw_rwlock_t *rw)
154 asm volatile(LOCK_PREFIX " ; incl %0" :"=m" (rw->lock) : : "memory");
157 static inline void __raw_write_unlock(raw_rwlock_t *rw)
159 asm volatile(LOCK_PREFIX " ; addl $" RW_LOCK_BIAS_STR ",%0"
160 : "=m" (rw->lock) : : "memory");
163 #define _raw_spin_relax(lock) cpu_relax()
164 #define _raw_read_relax(lock) cpu_relax()
165 #define _raw_write_relax(lock) cpu_relax()
167 #endif /* __ASM_SPINLOCK_H */