fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / kernel / irq / spurious.c
blob32b161972fad2cda220f3f4698e9fb565017b6a1
1 /*
2 * linux/kernel/irq/spurious.c
4 * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
6 * This file contains spurious interrupt handling.
7 */
9 #include <linux/irq.h>
10 #include <linux/module.h>
11 #include <linux/kallsyms.h>
12 #include <linux/interrupt.h>
14 static int irqfixup __read_mostly;
17 * Recovery handler for misrouted interrupts.
19 static int misrouted_irq(int irq)
21 int i;
22 int ok = 0;
23 int work = 0; /* Did we do work for a real IRQ */
25 for (i = 1; i < NR_IRQS; i++) {
26 struct irq_desc *desc = irq_desc + i;
27 struct irqaction *action;
29 if (i == irq) /* Already tried */
30 continue;
32 spin_lock(&desc->lock);
33 /* Already running on another processor */
34 if (desc->status & IRQ_INPROGRESS) {
36 * Already running: If it is shared get the other
37 * CPU to go looking for our mystery interrupt too
39 if (desc->action && (desc->action->flags & IRQF_SHARED))
40 desc->status |= IRQ_PENDING;
41 spin_unlock(&desc->lock);
42 continue;
44 /* Honour the normal IRQ locking */
45 desc->status |= IRQ_INPROGRESS;
46 action = desc->action;
47 spin_unlock(&desc->lock);
49 while (action) {
50 /* Only shared IRQ handlers are safe to call */
51 if (action->flags & IRQF_SHARED) {
52 if (action->handler(i, action->dev_id) ==
53 IRQ_HANDLED)
54 ok = 1;
56 action = action->next;
58 local_irq_disable();
59 /* Now clean up the flags */
60 spin_lock(&desc->lock);
61 action = desc->action;
64 * While we were looking for a fixup someone queued a real
65 * IRQ clashing with our walk:
67 while ((desc->status & IRQ_PENDING) && action) {
69 * Perform real IRQ processing for the IRQ we deferred
71 work = 1;
72 spin_unlock(&desc->lock);
73 handle_IRQ_event(i, action);
74 spin_lock(&desc->lock);
75 desc->status &= ~IRQ_PENDING;
77 desc->status &= ~IRQ_INPROGRESS;
79 * If we did actual work for the real IRQ line we must let the
80 * IRQ controller clean up too
82 if (work && desc->chip && desc->chip->end)
83 desc->chip->end(i);
84 spin_unlock(&desc->lock);
86 /* So the caller can adjust the irq error counts */
87 return ok;
91 * If 99,900 of the previous 100,000 interrupts have not been handled
92 * then assume that the IRQ is stuck in some manner. Drop a diagnostic
93 * and try to turn the IRQ off.
95 * (The other 100-of-100,000 interrupts may have been a correctly
96 * functioning device sharing an IRQ with the failing one)
98 * Called under desc->lock
101 static void
102 __report_bad_irq(unsigned int irq, struct irq_desc *desc,
103 irqreturn_t action_ret)
105 struct irqaction *action;
107 if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
108 printk(KERN_ERR "irq event %d: bogus return value %x\n",
109 irq, action_ret);
110 } else {
111 printk(KERN_ERR "irq %d: nobody cared (try booting with "
112 "the \"irqpoll\" option)\n", irq);
114 dump_stack();
115 printk(KERN_ERR "handlers:\n");
117 action = desc->action;
118 while (action) {
119 printk(KERN_ERR "[<%p>]", action->handler);
120 print_symbol(" (%s)",
121 (unsigned long)action->handler);
122 printk("\n");
123 action = action->next;
127 static void
128 report_bad_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret)
130 static int count = 100;
132 if (count > 0) {
133 count--;
134 __report_bad_irq(irq, desc, action_ret);
138 static inline int try_misrouted_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret)
140 struct irqaction *action;
142 if (!irqfixup)
143 return 0;
145 /* We didn't actually handle the IRQ - see if it was misrouted? */
146 if (action_ret == IRQ_NONE)
147 return 1;
150 * But for 'irqfixup == 2' we also do it for handled interrupts if
151 * they are marked as IRQF_IRQPOLL (or for irq zero, which is the
152 * traditional PC timer interrupt.. Legacy)
154 if (irqfixup < 2)
155 return 0;
157 if (!irq)
158 return 1;
161 * Since we don't get the descriptor lock, "action" can
162 * change under us. We don't really care, but we don't
163 * want to follow a NULL pointer. So tell the compiler to
164 * just load it once by using a barrier.
166 action = desc->action;
167 barrier();
168 return action && (action->flags & IRQF_IRQPOLL);
171 void note_interrupt(unsigned int irq, struct irq_desc *desc,
172 irqreturn_t action_ret)
174 if (unlikely(action_ret != IRQ_HANDLED)) {
176 * If we are seeing only the odd spurious IRQ caused by
177 * bus asynchronicity then don't eventually trigger an error,
178 * otherwise the couter becomes a doomsday timer for otherwise
179 * working systems
181 if (jiffies - desc->last_unhandled > HZ/10)
182 desc->irqs_unhandled = 1;
183 else
184 desc->irqs_unhandled++;
185 desc->last_unhandled = jiffies;
186 if (unlikely(action_ret != IRQ_NONE))
187 report_bad_irq(irq, desc, action_ret);
190 if (unlikely(try_misrouted_irq(irq, desc, action_ret))) {
191 int ok = misrouted_irq(irq);
192 if (action_ret == IRQ_NONE)
193 desc->irqs_unhandled -= ok;
196 desc->irq_count++;
197 if (likely(desc->irq_count < 100000))
198 return;
200 desc->irq_count = 0;
201 if (unlikely(desc->irqs_unhandled > 99900)) {
203 * The interrupt is stuck
205 __report_bad_irq(irq, desc, action_ret);
207 * Now kill the IRQ
209 printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
210 desc->status |= IRQ_DISABLED;
211 desc->depth = 1;
212 desc->chip->disable(irq);
214 desc->irqs_unhandled = 0;
217 int noirqdebug __read_mostly;
219 int noirqdebug_setup(char *str)
221 noirqdebug = 1;
222 printk(KERN_INFO "IRQ lockup detection disabled\n");
224 return 1;
227 __setup("noirqdebug", noirqdebug_setup);
229 static int __init irqfixup_setup(char *str)
231 irqfixup = 1;
232 printk(KERN_WARNING "Misrouted IRQ fixup support enabled.\n");
233 printk(KERN_WARNING "This may impact system performance.\n");
235 return 1;
238 __setup("irqfixup", irqfixup_setup);
240 static int __init irqpoll_setup(char *str)
242 irqfixup = 2;
243 printk(KERN_WARNING "Misrouted IRQ fixup and polling support "
244 "enabled\n");
245 printk(KERN_WARNING "This may significantly impact system "
246 "performance\n");
247 return 1;
250 __setup("irqpoll", irqpoll_setup);