fs: use kmem_cache_zalloc instead
[pv_ops_mirror.git] / sound / arm / aaci.h
blob924f69c1c44c4bd39340c006db12572ab80a341e
1 /*
2 * linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
4 * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #ifndef AACI_H
11 #define AACI_H
14 * Control and status register offsets
15 * P39.
17 #define AACI_CSCH1 0x000
18 #define AACI_CSCH2 0x014
19 #define AACI_CSCH3 0x028
20 #define AACI_CSCH4 0x03c
22 #define AACI_RXCR 0x000 /* 29 bits Control Rx FIFO */
23 #define AACI_TXCR 0x004 /* 17 bits Control Tx FIFO */
24 #define AACI_SR 0x008 /* 12 bits Status */
25 #define AACI_ISR 0x00c /* 7 bits Int Status */
26 #define AACI_IE 0x010 /* 7 bits Int Enable */
29 * Other registers
31 #define AACI_SL1RX 0x050
32 #define AACI_SL1TX 0x054
33 #define AACI_SL2RX 0x058
34 #define AACI_SL2TX 0x05c
35 #define AACI_SL12RX 0x060
36 #define AACI_SL12TX 0x064
37 #define AACI_SLFR 0x068 /* slot flags */
38 #define AACI_SLISTAT 0x06c /* slot interrupt status */
39 #define AACI_SLIEN 0x070 /* slot interrupt enable */
40 #define AACI_INTCLR 0x074 /* interrupt clear */
41 #define AACI_MAINCR 0x078 /* main control */
42 #define AACI_RESET 0x07c /* reset control */
43 #define AACI_SYNC 0x080 /* sync control */
44 #define AACI_ALLINTS 0x084 /* all fifo interrupt status */
45 #define AACI_MAINFR 0x088 /* main flag register */
46 #define AACI_DR1 0x090 /* data read/written fifo 1 */
47 #define AACI_DR2 0x0b0 /* data read/written fifo 2 */
48 #define AACI_DR3 0x0d0 /* data read/written fifo 3 */
49 #define AACI_DR4 0x0f0 /* data read/written fifo 4 */
52 * TX/RX fifo control register (CR). P48
54 #define CR_FEN (1 << 16) /* fifo enable */
55 #define CR_COMPACT (1 << 15) /* compact mode */
56 #define CR_SZ16 (0 << 13) /* 16 bits */
57 #define CR_SZ18 (1 << 13) /* 18 bits */
58 #define CR_SZ20 (2 << 13) /* 20 bits */
59 #define CR_SZ12 (3 << 13) /* 12 bits */
60 #define CR_SL12 (1 << 12)
61 #define CR_SL11 (1 << 11)
62 #define CR_SL10 (1 << 10)
63 #define CR_SL9 (1 << 9)
64 #define CR_SL8 (1 << 8)
65 #define CR_SL7 (1 << 7)
66 #define CR_SL6 (1 << 6)
67 #define CR_SL5 (1 << 5)
68 #define CR_SL4 (1 << 4)
69 #define CR_SL3 (1 << 3)
70 #define CR_SL2 (1 << 2)
71 #define CR_SL1 (1 << 1)
72 #define CR_EN (1 << 0) /* transmit enable */
75 * status register bits. P49
77 #define SR_RXTOFE (1 << 11) /* rx timeout fifo empty */
78 #define SR_TXTO (1 << 10) /* rx timeout fifo nonempty */
79 #define SR_TXU (1 << 9) /* tx underrun */
80 #define SR_RXO (1 << 8) /* rx overrun */
81 #define SR_TXB (1 << 7) /* tx busy */
82 #define SR_RXB (1 << 6) /* rx busy */
83 #define SR_TXFF (1 << 5) /* tx fifo full */
84 #define SR_RXFF (1 << 4) /* rx fifo full */
85 #define SR_TXHE (1 << 3) /* tx fifo half empty */
86 #define SR_RXHF (1 << 2) /* rx fifo half full */
87 #define SR_TXFE (1 << 1) /* tx fifo empty */
88 #define SR_RXFE (1 << 0) /* rx fifo empty */
91 * interrupt status register bits.
93 #define ISR_RXTOFEINTR (1 << 6) /* rx fifo empty */
94 #define ISR_URINTR (1 << 5) /* tx underflow */
95 #define ISR_ORINTR (1 << 4) /* rx overflow */
96 #define ISR_RXINTR (1 << 3) /* rx fifo */
97 #define ISR_TXINTR (1 << 2) /* tx fifo intr */
98 #define ISR_RXTOINTR (1 << 1) /* tx timeout */
99 #define ISR_TXCINTR (1 << 0) /* tx complete */
102 * interrupt enable register bits.
104 #define IE_RXTOIE (1 << 6)
105 #define IE_URIE (1 << 5)
106 #define IE_ORIE (1 << 4)
107 #define IE_RXIE (1 << 3)
108 #define IE_TXIE (1 << 2)
109 #define IE_RXTIE (1 << 1)
110 #define IE_TXCIE (1 << 0)
113 * interrupt status. P51
115 #define ISR_RXTOFE (1 << 6) /* rx timeout fifo empty */
116 #define ISR_UR (1 << 5) /* tx fifo underrun */
117 #define ISR_OR (1 << 4) /* rx fifo overrun */
118 #define ISR_RX (1 << 3) /* rx interrupt status */
119 #define ISR_TX (1 << 2) /* tx interrupt status */
120 #define ISR_RXTO (1 << 1) /* rx timeout */
121 #define ISR_TXC (1 << 0) /* tx complete */
124 * interrupt enable. P52
126 #define IE_RXTOFE (1 << 6) /* rx timeout fifo empty */
127 #define IE_UR (1 << 5) /* tx fifo underrun */
128 #define IE_OR (1 << 4) /* rx fifo overrun */
129 #define IE_RX (1 << 3) /* rx interrupt status */
130 #define IE_TX (1 << 2) /* tx interrupt status */
131 #define IE_RXTO (1 << 1) /* rx timeout */
132 #define IE_TXC (1 << 0) /* tx complete */
135 * slot flag register bits. P56
137 #define SLFR_RWIS (1 << 13) /* raw wake-up interrupt status */
138 #define SLFR_RGPIOINTR (1 << 12) /* raw gpio interrupt */
139 #define SLFR_12TXE (1 << 11) /* slot 12 tx empty */
140 #define SLFR_12RXV (1 << 10) /* slot 12 rx valid */
141 #define SLFR_2TXE (1 << 9) /* slot 2 tx empty */
142 #define SLFR_2RXV (1 << 8) /* slot 2 rx valid */
143 #define SLFR_1TXE (1 << 7) /* slot 1 tx empty */
144 #define SLFR_1RXV (1 << 6) /* slot 1 rx valid */
145 #define SLFR_12TXB (1 << 5) /* slot 12 tx busy */
146 #define SLFR_12RXB (1 << 4) /* slot 12 rx busy */
147 #define SLFR_2TXB (1 << 3) /* slot 2 tx busy */
148 #define SLFR_2RXB (1 << 2) /* slot 2 rx busy */
149 #define SLFR_1TXB (1 << 1) /* slot 1 tx busy */
150 #define SLFR_1RXB (1 << 0) /* slot 1 rx busy */
153 * Interrupt clear register.
155 #define ICLR_RXTOFEC4 (1 << 12)
156 #define ICLR_RXTOFEC3 (1 << 11)
157 #define ICLR_RXTOFEC2 (1 << 10)
158 #define ICLR_RXTOFEC1 (1 << 9)
159 #define ICLR_TXUEC4 (1 << 8)
160 #define ICLR_TXUEC3 (1 << 7)
161 #define ICLR_TXUEC2 (1 << 6)
162 #define ICLR_TXUEC1 (1 << 5)
163 #define ICLR_RXOEC4 (1 << 4)
164 #define ICLR_RXOEC3 (1 << 3)
165 #define ICLR_RXOEC2 (1 << 2)
166 #define ICLR_RXOEC1 (1 << 1)
167 #define ICLR_WISC (1 << 0)
170 * Main control register bits. P62
172 #define MAINCR_SCRA(x) ((x) << 10) /* secondary codec reg access */
173 #define MAINCR_DMAEN (1 << 9) /* dma enable */
174 #define MAINCR_SL12TXEN (1 << 8) /* slot 12 transmit enable */
175 #define MAINCR_SL12RXEN (1 << 7) /* slot 12 receive enable */
176 #define MAINCR_SL2TXEN (1 << 6) /* slot 2 transmit enable */
177 #define MAINCR_SL2RXEN (1 << 5) /* slot 2 receive enable */
178 #define MAINCR_SL1TXEN (1 << 4) /* slot 1 transmit enable */
179 #define MAINCR_SL1RXEN (1 << 3) /* slot 1 receive enable */
180 #define MAINCR_LPM (1 << 2) /* low power mode */
181 #define MAINCR_LOOPBK (1 << 1) /* loopback */
182 #define MAINCR_IE (1 << 0) /* aaci interface enable */
185 * Reset register bits. P65
187 #define RESET_NRST (1 << 0)
190 * Sync register bits. P65
192 #define SYNC_FORCE (1 << 0)
195 * Main flag register bits. P66
197 #define MAINFR_TXB (1 << 1) /* transmit busy */
198 #define MAINFR_RXB (1 << 0) /* receive busy */
202 struct aaci_runtime {
203 void __iomem *base;
204 void __iomem *fifo;
206 struct ac97_pcm *pcm;
207 int pcm_open;
209 u32 cr;
210 struct snd_pcm_substream *substream;
213 * PIO support
215 void *start;
216 void *end;
217 void *ptr;
218 int bytes;
219 unsigned int period;
220 unsigned int fifosz;
223 struct aaci {
224 struct amba_device *dev;
225 struct snd_card *card;
226 void __iomem *base;
227 unsigned int fifosize;
229 /* AC'97 */
230 struct mutex ac97_sem;
231 struct snd_ac97_bus *ac97_bus;
232 struct snd_ac97 *ac97;
234 u32 maincr;
235 spinlock_t lock;
237 struct aaci_runtime playback;
238 struct aaci_runtime capture;
240 struct snd_pcm *pcm;
243 #define ACSTREAM_FRONT 0
244 #define ACSTREAM_SURROUND 1
245 #define ACSTREAM_LFE 2
247 #endif