2 * linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002
4 * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
5 * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
6 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
7 * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
9 * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
12 #include <linux/module.h>
13 #include <linux/types.h>
14 #include <linux/kernel.h>
15 #include <linux/timer.h>
17 #include <linux/ioport.h>
18 #include <linux/interrupt.h>
19 #include <linux/blkdev.h>
20 #include <linux/hdreg.h>
21 #include <linux/pci.h>
22 #include <linux/delay.h>
23 #include <linux/ide.h>
24 #include <linux/init.h>
29 /* SUPERIO 87560 is a PoS chip that NatSem denies exists.
30 * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
31 * which use the integrated NS87514 cell for CD-ROM support.
32 * i.e we have to support for CD-ROM installs.
33 * See drivers/parisc/superio.c for more gory details.
35 #include <asm/superio.h>
37 static unsigned long superio_ide_status
[2];
38 static unsigned long superio_ide_select
[2];
39 static unsigned long superio_ide_dma_status
[2];
41 #define SUPERIO_IDE_MAX_RETRIES 25
43 /* Because of a defect in Super I/O, all reads of the PCI DMA status
44 * registers, IDE status register and the IDE select register need to be
47 static u8
superio_ide_inb (unsigned long port
)
49 if (port
== superio_ide_status
[0] ||
50 port
== superio_ide_status
[1] ||
51 port
== superio_ide_select
[0] ||
52 port
== superio_ide_select
[1] ||
53 port
== superio_ide_dma_status
[0] ||
54 port
== superio_ide_dma_status
[1]) {
56 int retries
= SUPERIO_IDE_MAX_RETRIES
;
58 /* printk(" [ reading port 0x%x with retry ] ", port); */
64 } while (tmp
== 0 && retries
-- > 0);
72 static void __devinit
superio_ide_init_iops (struct hwif_s
*hwif
)
76 struct pci_dev
*pdev
= hwif
->pci_dev
;
77 u8 port
= hwif
->channel
;
79 base
= pci_resource_start(pdev
, port
* 2) & ~3;
80 dmabase
= pci_resource_start(pdev
, 4) & ~3;
82 superio_ide_status
[port
] = base
+ IDE_STATUS_OFFSET
;
83 superio_ide_select
[port
] = base
+ IDE_SELECT_OFFSET
;
84 superio_ide_dma_status
[port
] = dmabase
+ (!port
? 2 : 0xa);
86 /* Clear error/interrupt, enable dma */
87 tmp
= superio_ide_inb(superio_ide_dma_status
[port
]);
88 outb(tmp
| 0x66, superio_ide_dma_status
[port
]);
90 /* We need to override inb to workaround a SuperIO errata */
91 hwif
->INB
= superio_ide_inb
;
94 static void __devinit
init_iops_ns87415(ide_hwif_t
*hwif
)
96 if (PCI_SLOT(hwif
->pci_dev
->devfn
) == 0xE) {
97 /* Built-in - assume it's under superio. */
98 superio_ide_init_iops(hwif
);
103 static unsigned int ns87415_count
= 0, ns87415_control
[MAX_HWIFS
] = { 0 };
106 * This routine either enables/disables (according to drive->present)
107 * the IRQ associated with the port (HWIF(drive)),
108 * and selects either PIO or DMA handshaking for the next I/O operation.
110 static void ns87415_prepare_drive (ide_drive_t
*drive
, unsigned int use_dma
)
112 ide_hwif_t
*hwif
= HWIF(drive
);
113 unsigned int bit
, other
, new, *old
= (unsigned int *) hwif
->select_data
;
114 struct pci_dev
*dev
= hwif
->pci_dev
;
117 local_irq_save(flags
);
120 /* Adjust IRQ enable bit */
121 bit
= 1 << (8 + hwif
->channel
);
122 new = drive
->present
? (new & ~bit
) : (new | bit
);
124 /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
125 bit
= 1 << (20 + drive
->select
.b
.unit
+ (hwif
->channel
<< 1));
126 other
= 1 << (20 + (1 - drive
->select
.b
.unit
) + (hwif
->channel
<< 1));
127 new = use_dma
? ((new & ~other
) | bit
) : (new & ~bit
);
133 * Don't change DMA engine settings while Write Buffers
136 (void) pci_read_config_byte(dev
, 0x43, &stat
);
137 while (stat
& 0x03) {
139 (void) pci_read_config_byte(dev
, 0x43, &stat
);
143 (void) pci_write_config_dword(dev
, 0x40, new);
146 * And let things settle...
151 local_irq_restore(flags
);
154 static void ns87415_selectproc (ide_drive_t
*drive
)
156 ns87415_prepare_drive (drive
, drive
->using_dma
);
159 static int ns87415_ide_dma_end (ide_drive_t
*drive
)
161 ide_hwif_t
*hwif
= HWIF(drive
);
162 u8 dma_stat
= 0, dma_cmd
= 0;
164 drive
->waiting_for_dma
= 0;
165 dma_stat
= hwif
->INB(hwif
->dma_status
);
166 /* get dma command mode */
167 dma_cmd
= hwif
->INB(hwif
->dma_command
);
169 outb(dma_cmd
& ~1, hwif
->dma_command
);
170 /* from ERRATA: clear the INTR & ERROR bits */
171 dma_cmd
= hwif
->INB(hwif
->dma_command
);
172 outb(dma_cmd
| 6, hwif
->dma_command
);
173 /* and free any DMA resources */
174 ide_destroy_dmatable(drive
);
175 /* verify good DMA status */
176 return (dma_stat
& 7) != 4;
179 static int ns87415_ide_dma_setup(ide_drive_t
*drive
)
181 /* select DMA xfer */
182 ns87415_prepare_drive(drive
, 1);
183 if (!ide_dma_setup(drive
))
185 /* DMA failed: select PIO xfer */
186 ns87415_prepare_drive(drive
, 0);
190 static int ns87415_ide_dma_check (ide_drive_t
*drive
)
192 if (drive
->media
!= ide_disk
)
195 return __ide_dma_check(drive
);
198 static void __devinit
init_hwif_ns87415 (ide_hwif_t
*hwif
)
200 struct pci_dev
*dev
= hwif
->pci_dev
;
201 unsigned int ctrl
, using_inta
;
209 hwif
->selectproc
= &ns87415_selectproc
;
212 * We cannot probe for IRQ: both ports share common IRQ on INTA.
213 * Also, leave IRQ masked during drive probing, to prevent infinite
214 * interrupts from a potentially floating INTA..
216 * IRQs get unmasked in selectproc when drive is first used.
218 (void) pci_read_config_dword(dev
, 0x40, &ctrl
);
219 (void) pci_read_config_byte(dev
, 0x09, &progif
);
220 /* is irq in "native" mode? */
221 using_inta
= progif
& (1 << (hwif
->channel
<< 1));
223 using_inta
= ctrl
& (1 << (4 + hwif
->channel
));
225 hwif
->select_data
= hwif
->mate
->select_data
;
227 hwif
->select_data
= (unsigned long)
228 &ns87415_control
[ns87415_count
++];
229 ctrl
|= (1 << 8) | (1 << 9); /* mask both IRQs */
231 ctrl
&= ~(1 << 6); /* unmask INTA */
232 *((unsigned int *)hwif
->select_data
) = ctrl
;
233 (void) pci_write_config_dword(dev
, 0x40, ctrl
);
236 * Set prefetch size to 512 bytes for both ports,
237 * but don't turn on/off prefetching here.
239 pci_write_config_byte(dev
, 0x55, 0xee);
243 * XXX: Reset the device, if we don't it will not respond
244 * to SELECT_DRIVE() properly during first probe_hwif().
247 outb(12, hwif
->io_ports
[IDE_CONTROL_OFFSET
]);
249 outb(8, hwif
->io_ports
[IDE_CONTROL_OFFSET
]);
252 stat
= hwif
->INB(hwif
->io_ports
[IDE_STATUS_OFFSET
]);
255 } while ((stat
& BUSY_STAT
) && --timeout
);
260 hwif
->irq
= ide_default_irq(hwif
->io_ports
[IDE_DATA_OFFSET
]);
261 else if (!hwif
->irq
&& hwif
->mate
&& hwif
->mate
->irq
)
262 hwif
->irq
= hwif
->mate
->irq
; /* share IRQ with mate */
267 outb(0x60, hwif
->dma_status
);
268 hwif
->dma_setup
= &ns87415_ide_dma_setup
;
269 hwif
->ide_dma_check
= &ns87415_ide_dma_check
;
270 hwif
->ide_dma_end
= &ns87415_ide_dma_end
;
274 hwif
->drives
[0].autodma
= hwif
->autodma
;
275 hwif
->drives
[1].autodma
= hwif
->autodma
;
278 static ide_pci_device_t ns87415_chipset __devinitdata
= {
280 #ifdef CONFIG_SUPERIO
281 .init_iops
= init_iops_ns87415
,
283 .init_hwif
= init_hwif_ns87415
,
286 .bootable
= ON_BOARD
,
289 static int __devinit
ns87415_init_one(struct pci_dev
*dev
, const struct pci_device_id
*id
)
291 return ide_setup_pci_device(dev
, &ns87415_chipset
);
294 static struct pci_device_id ns87415_pci_tbl
[] = {
295 { PCI_VENDOR_ID_NS
, PCI_DEVICE_ID_NS_87415
, PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
298 MODULE_DEVICE_TABLE(pci
, ns87415_pci_tbl
);
300 static struct pci_driver driver
= {
301 .name
= "NS87415_IDE",
302 .id_table
= ns87415_pci_tbl
,
303 .probe
= ns87415_init_one
,
306 static int __init
ns87415_ide_init(void)
308 return ide_pci_register_driver(&driver
);
311 module_init(ns87415_ide_init
);
313 MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
314 MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
315 MODULE_LICENSE("GPL");