Revert "[PATCH] paravirt: Add startup infrastructure for paravirtualization"
[pv_ops_mirror.git] / drivers / isdn / hisax / nj_s.c
blobc09ffb135330ef1363f74edb207302a14ba4364e
1 /* $Id: nj_s.c,v 2.13.2.4 2004/01/16 01:53:48 keil Exp $
3 * This software may be used and distributed according to the terms
4 * of the GNU General Public License, incorporated herein by reference.
6 */
8 #include <linux/init.h>
9 #include "hisax.h"
10 #include "isac.h"
11 #include "isdnl1.h"
12 #include <linux/pci.h>
13 #include <linux/interrupt.h>
14 #include <linux/ppp_defs.h>
15 #include "netjet.h"
17 static const char *NETjet_S_revision = "$Revision: 2.13.2.4 $";
19 static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off)
21 return(5);
24 static void dummywr(struct IsdnCardState *cs, int chan, u_char off, u_char value)
28 static irqreturn_t
29 netjet_s_interrupt(int intno, void *dev_id)
31 struct IsdnCardState *cs = dev_id;
32 u_char val, s1val, s0val;
33 u_long flags;
35 spin_lock_irqsave(&cs->lock, flags);
36 s1val = bytein(cs->hw.njet.base + NETJET_IRQSTAT1);
37 if (!(s1val & NETJET_ISACIRQ)) {
38 val = NETjet_ReadIC(cs, ISAC_ISTA);
39 if (cs->debug & L1_DEB_ISAC)
40 debugl1(cs, "tiger: i1 %x %x", s1val, val);
41 if (val) {
42 isac_interrupt(cs, val);
43 NETjet_WriteIC(cs, ISAC_MASK, 0xFF);
44 NETjet_WriteIC(cs, ISAC_MASK, 0x0);
46 s1val = 1;
47 } else
48 s1val = 0;
49 /*
50 * read/write stat0 is better, because lower IRQ rate
51 * Note the IRQ is on for 125 us if a condition match
52 * thats long on modern CPU and so the IRQ is reentered
53 * all the time.
55 s0val = bytein(cs->hw.njet.base + NETJET_IRQSTAT0);
56 if ((s0val | s1val)==0) { // shared IRQ
57 spin_unlock_irqrestore(&cs->lock, flags);
58 return IRQ_NONE;
60 if (s0val)
61 byteout(cs->hw.njet.base + NETJET_IRQSTAT0, s0val);
62 /* start new code 13/07/00 GE */
63 /* set bits in sval to indicate which page is free */
64 if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
65 inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
66 /* the 2nd write page is free */
67 s0val = 0x08;
68 else /* the 1st write page is free */
69 s0val = 0x04;
70 if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
71 inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
72 /* the 2nd read page is free */
73 s0val |= 0x02;
74 else /* the 1st read page is free */
75 s0val |= 0x01;
76 if (s0val != cs->hw.njet.last_is0) /* we have a DMA interrupt */
78 if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
79 printk(KERN_WARNING "nj LOCK_ATOMIC s0val %x->%x\n",
80 cs->hw.njet.last_is0, s0val);
81 spin_unlock_irqrestore(&cs->lock, flags);
82 return IRQ_HANDLED;
84 cs->hw.njet.irqstat0 = s0val;
85 if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) !=
86 (cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
87 /* we have a read dma int */
88 read_tiger(cs);
89 if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
90 (cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
91 /* we have a write dma int */
92 write_tiger(cs);
93 /* end new code 13/07/00 GE */
94 test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
96 spin_unlock_irqrestore(&cs->lock, flags);
97 return IRQ_HANDLED;
100 static void
101 reset_netjet_s(struct IsdnCardState *cs)
103 cs->hw.njet.ctrl_reg = 0xff; /* Reset On */
104 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
105 mdelay(10);
106 /* now edge triggered for TJ320 GE 13/07/00 */
107 /* see comment in IRQ function */
108 if (cs->subtyp) /* TJ320 */
109 cs->hw.njet.ctrl_reg = 0x40; /* Reset Off and status read clear */
110 else
111 cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */
112 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
113 mdelay(10);
114 cs->hw.njet.auxd = 0;
115 cs->hw.njet.dmactrl = 0;
116 byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
117 byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
118 byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
121 static int
122 NETjet_S_card_msg(struct IsdnCardState *cs, int mt, void *arg)
124 u_long flags;
126 switch (mt) {
127 case CARD_RESET:
128 spin_lock_irqsave(&cs->lock, flags);
129 reset_netjet_s(cs);
130 spin_unlock_irqrestore(&cs->lock, flags);
131 return(0);
132 case CARD_RELEASE:
133 release_io_netjet(cs);
134 return(0);
135 case CARD_INIT:
136 reset_netjet_s(cs);
137 inittiger(cs);
138 spin_lock_irqsave(&cs->lock, flags);
139 clear_pending_isac_ints(cs);
140 initisac(cs);
141 /* Reenable all IRQ */
142 cs->writeisac(cs, ISAC_MASK, 0);
143 spin_unlock_irqrestore(&cs->lock, flags);
144 return(0);
145 case CARD_TEST:
146 return(0);
148 return(0);
151 static struct pci_dev *dev_netjet __devinitdata = NULL;
153 int __devinit
154 setup_netjet_s(struct IsdnCard *card)
156 int bytecnt,cfg;
157 struct IsdnCardState *cs = card->cs;
158 char tmp[64];
160 #ifdef __BIG_ENDIAN
161 #error "not running on big endian machines now"
162 #endif
163 strcpy(tmp, NETjet_S_revision);
164 printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
165 if (cs->typ != ISDN_CTYPE_NETJET_S)
166 return(0);
167 test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
169 #ifdef CONFIG_PCI
171 for ( ;; )
173 if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
174 PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
175 if (pci_enable_device(dev_netjet))
176 return(0);
177 pci_set_master(dev_netjet);
178 cs->irq = dev_netjet->irq;
179 if (!cs->irq) {
180 printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
181 return(0);
183 cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
184 if (!cs->hw.njet.base) {
185 printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
186 return(0);
188 /* the TJ300 and TJ320 must be detected, the IRQ handling is different
189 * unfortunatly the chips use the same device ID, but the TJ320 has
190 * the bit20 in status PCI cfg register set
192 pci_read_config_dword(dev_netjet, 0x04, &cfg);
193 if (cfg & 0x00100000)
194 cs->subtyp = 1; /* TJ320 */
195 else
196 cs->subtyp = 0; /* TJ300 */
197 /* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
198 if ((dev_netjet->subsystem_vendor == 0x55) &&
199 (dev_netjet->subsystem_device == 0x02)) {
200 printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
201 printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
202 return(0);
204 /* end new code */
205 } else {
206 printk(KERN_WARNING "NETjet-S: No PCI card found\n");
207 return(0);
210 cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
211 cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
213 cs->hw.njet.ctrl_reg = 0xff; /* Reset On */
214 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
215 mdelay(10);
217 cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */
218 byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
219 mdelay(10);
221 cs->hw.njet.auxd = 0xC0;
222 cs->hw.njet.dmactrl = 0;
224 byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
225 byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
226 byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
228 switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
230 case 0 :
231 break;
233 case 3 :
234 printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
235 continue;
237 default :
238 printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
239 return 0;
241 break;
243 #else
245 printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
246 printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
247 return (0);
249 #endif /* CONFIG_PCI */
251 bytecnt = 256;
253 printk(KERN_INFO
254 "NETjet-S: %s card configured at %#lx IRQ %d\n",
255 cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
256 if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
257 printk(KERN_WARNING
258 "HiSax: %s config port %#lx-%#lx already in use\n",
259 CardType[card->typ],
260 cs->hw.njet.base,
261 cs->hw.njet.base + bytecnt);
262 return (0);
264 cs->readisac = &NETjet_ReadIC;
265 cs->writeisac = &NETjet_WriteIC;
266 cs->readisacfifo = &NETjet_ReadICfifo;
267 cs->writeisacfifo = &NETjet_WriteICfifo;
268 cs->BC_Read_Reg = &dummyrr;
269 cs->BC_Write_Reg = &dummywr;
270 cs->BC_Send_Data = &netjet_fill_dma;
271 setup_isac(cs);
272 cs->cardmsg = &NETjet_S_card_msg;
273 cs->irq_func = &netjet_s_interrupt;
274 cs->irq_flags |= IRQF_SHARED;
275 ISACVersion(cs, "NETjet-S:");
276 return (1);