2 * linux/drivers/acorn/net/ether1.c
4 * Copyright (C) 1996-2000 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * Acorn ether1 driver (82586 chip) for Acorn machines
12 * We basically keep two queues in the cards memory - one for transmit
13 * and one for receive. Each has a head and a tail. The head is where
14 * we/the chip adds packets to be transmitted/received, and the tail
15 * is where the transmitter has got to/where the receiver will stop.
16 * Both of these queues are circular, and since the chip is running
17 * all the time, we have to be careful when we modify the pointers etc
18 * so that the buffer memory contents is valid all the time.
22 * 1.01 RMK 19/03/1996 Transfers the last odd byte onto/off of the card now.
23 * 1.02 RMK 25/05/1997 Added code to restart RU if it goes not ready
24 * 1.03 RMK 14/09/1997 Cleaned up the handling of a reset during the TX interrupt.
25 * Should prevent lockup.
26 * 1.04 RMK 17/09/1997 Added more info when initialsation of chip goes wrong.
27 * TDR now only reports failure when chip reports non-zero
29 * 1.05 RMK 31/12/1997 Removed calls to dev_tint for 2.1
30 * 1.06 RMK 10/02/2000 Updated for 2.3.43
31 * 1.07 RMK 13/05/2000 Updated for 2.3.99-pre8
34 #include <linux/module.h>
35 #include <linux/kernel.h>
36 #include <linux/types.h>
37 #include <linux/fcntl.h>
38 #include <linux/interrupt.h>
39 #include <linux/ptrace.h>
40 #include <linux/ioport.h>
42 #include <linux/slab.h>
43 #include <linux/string.h>
44 #include <linux/errno.h>
45 #include <linux/device.h>
46 #include <linux/init.h>
47 #include <linux/netdevice.h>
48 #include <linux/etherdevice.h>
49 #include <linux/skbuff.h>
50 #include <linux/bitops.h>
52 #include <asm/system.h>
55 #include <asm/ecard.h>
60 static unsigned int net_debug
= NET_DEBUG
;
62 #define BUFFER_SIZE 0x10000
63 #define TX_AREA_START 0x00100
64 #define TX_AREA_END 0x05000
65 #define RX_AREA_START 0x05000
66 #define RX_AREA_END 0x0fc00
68 static int ether1_open(struct net_device
*dev
);
69 static int ether1_sendpacket(struct sk_buff
*skb
, struct net_device
*dev
);
70 static irqreturn_t
ether1_interrupt(int irq
, void *dev_id
);
71 static int ether1_close(struct net_device
*dev
);
72 static struct net_device_stats
*ether1_getstats(struct net_device
*dev
);
73 static void ether1_setmulticastlist(struct net_device
*dev
);
74 static void ether1_timeout(struct net_device
*dev
);
76 /* ------------------------------------------------------------------------- */
78 static char version
[] __initdata
= "ether1 ethernet driver (c) 2000 Russell King v1.07\n";
83 /* ------------------------------------------------------------------------- */
88 #define ether1_readw(dev, addr, type, offset, svflgs) ether1_inw_p (dev, addr + (int)(&((type *)0)->offset), svflgs)
89 #define ether1_writew(dev, val, addr, type, offset, svflgs) ether1_outw_p (dev, val, addr + (int)(&((type *)0)->offset), svflgs)
91 static inline unsigned short
92 ether1_inw_p (struct net_device
*dev
, int addr
, int svflgs
)
98 local_irq_save (flags
);
100 writeb(addr
>> 12, REG_PAGE
);
101 ret
= readw(ETHER1_RAM
+ ((addr
& 4095) << 1));
103 local_irq_restore (flags
);
108 ether1_outw_p (struct net_device
*dev
, unsigned short val
, int addr
, int svflgs
)
113 local_irq_save (flags
);
115 writeb(addr
>> 12, REG_PAGE
);
116 writew(val
, ETHER1_RAM
+ ((addr
& 4095) << 1));
118 local_irq_restore (flags
);
122 * Some inline assembler to allow fast transfers on to/off of the card.
123 * Since this driver depends on some features presented by the ARM
124 * specific architecture, and that you can't configure this driver
125 * without specifiing ARM mode, this is not a problem.
127 * This routine is essentially an optimised memcpy from the card's
128 * onboard RAM to kernel memory.
131 ether1_writebuffer (struct net_device
*dev
, void *data
, unsigned int start
, unsigned int length
)
133 unsigned int page
, thislen
, offset
;
136 offset
= start
& 4095;
138 addr
= ETHER1_RAM
+ (offset
<< 1);
140 if (offset
+ length
> 4096)
141 thislen
= 4096 - offset
;
148 writeb(page
, REG_PAGE
);
151 __asm__
__volatile__(
154 1: ldr %0, [%1], #2\n\
155 mov %0, %0, lsl #16\n\
156 orr %0, %0, %0, lsr #16\n\
161 mov %0, %0, lsl #16\n\
162 orr %0, %0, %0, lsr #16\n\
167 mov %0, %0, lsl #16\n\
168 orr %0, %0, %0, lsr #16\n\
173 mov %0, %0, lsl #16\n\
174 orr %0, %0, %0, lsr #16\n\
178 2: adds %3, %3, #1\n\
181 : "=&r" (used
), "=&r" (data
)
182 : "r" (addr
), "r" (thislen
), "1" (data
));
194 ether1_readbuffer (struct net_device
*dev
, void *data
, unsigned int start
, unsigned int length
)
196 unsigned int page
, thislen
, offset
;
199 offset
= start
& 4095;
201 addr
= ETHER1_RAM
+ (offset
<< 1);
203 if (offset
+ length
> 4096)
204 thislen
= 4096 - offset
;
211 writeb(page
, REG_PAGE
);
214 __asm__
__volatile__(
217 1: ldr %0, [%2], #4\n\
219 mov %0, %0, lsr #8\n\
225 mov %0, %0, lsr #8\n\
231 mov %0, %0, lsr #8\n\
237 mov %0, %0, lsr #8\n\
241 2: adds %3, %3, #1\n\
244 : "=&r" (used
), "=&r" (data
)
245 : "r" (addr
), "r" (thislen
), "1" (data
));
257 ether1_ramtest(struct net_device
*dev
, unsigned char byte
)
259 unsigned char *buffer
= kmalloc (BUFFER_SIZE
, GFP_KERNEL
);
260 int i
, ret
= BUFFER_SIZE
;
268 memset (buffer
, byte
, BUFFER_SIZE
);
269 ether1_writebuffer (dev
, buffer
, 0, BUFFER_SIZE
);
270 memset (buffer
, byte
^ 0xff, BUFFER_SIZE
);
271 ether1_readbuffer (dev
, buffer
, 0, BUFFER_SIZE
);
273 for (i
= 0; i
< BUFFER_SIZE
; i
++) {
274 if (buffer
[i
] != byte
) {
275 if (max_errors
>= 0 && bad
!= buffer
[i
]) {
278 printk (KERN_CRIT
"%s: RAM failed with (%02X instead of %02X) at 0x%04X",
279 dev
->name
, buffer
[i
], byte
, i
);
287 if (bad_start
== i
- 1)
290 printk (" - 0x%04X\n", i
- 1);
297 printk (" - 0x%04X\n", BUFFER_SIZE
);
304 ether1_reset (struct net_device
*dev
)
306 writeb(CTRL_RST
|CTRL_ACK
, REG_CONTROL
);
311 ether1_init_2(struct net_device
*dev
)
316 i
= ether1_ramtest (dev
, 0x5a);
319 i
= ether1_ramtest (dev
, 0x1e);
329 * These are the structures that are loaded into the ether RAM card to
330 * initialise the 82586
334 #define NOP_ADDR (TX_AREA_START)
335 #define NOP_SIZE (0x06)
336 static nop_t init_nop
= {
343 #define TDR_ADDR (0x003a)
344 #define TDR_SIZE (0x08)
345 static tdr_t init_tdr
= {
353 #define MC_ADDR (0x002e)
354 #define MC_SIZE (0x0c)
355 static mc_t init_mc
= {
364 #define SA_ADDR (0x0022)
365 #define SA_SIZE (0x0c)
366 static sa_t init_sa
= {
374 #define CFG_ADDR (0x0010)
375 #define CFG_SIZE (0x12)
376 static cfg_t init_cfg
= {
383 CFG9_PREAMB8
| CFG9_ADDRLENBUF
| CFG9_ADDRLEN(6),
387 CFG13_RETRY(15) | CFG13_SLOTH(2),
392 #define SCB_ADDR (0x0000)
393 #define SCB_SIZE (0x10)
394 static scb_t init_scb
= {
396 SCB_CMDACKRNR
| SCB_CMDACKCNA
| SCB_CMDACKFR
| SCB_CMDACKCX
,
406 #define ISCP_ADDR (0xffee)
407 #define ISCP_SIZE (0x08)
408 static iscp_t init_iscp
= {
416 #define SCP_ADDR (0xfff6)
417 #define SCP_SIZE (0x0a)
418 static scp_t init_scp
= {
425 #define RFD_SIZE (0x16)
426 static rfd_t init_rfd
= {
436 #define RBD_SIZE (0x0a)
437 static rbd_t init_rbd
= {
445 #define TX_SIZE (0x08)
446 #define TBD_SIZE (0x08)
449 ether1_init_for_open (struct net_device
*dev
)
451 int i
, status
, addr
, next
, next2
;
453 unsigned long timeout
;
455 writeb(CTRL_RST
|CTRL_ACK
, REG_CONTROL
);
457 for (i
= 0; i
< 6; i
++)
458 init_sa
.sa_addr
[i
] = dev
->dev_addr
[i
];
460 /* load data structures into ether1 RAM */
461 ether1_writebuffer (dev
, &init_scp
, SCP_ADDR
, SCP_SIZE
);
462 ether1_writebuffer (dev
, &init_iscp
, ISCP_ADDR
, ISCP_SIZE
);
463 ether1_writebuffer (dev
, &init_scb
, SCB_ADDR
, SCB_SIZE
);
464 ether1_writebuffer (dev
, &init_cfg
, CFG_ADDR
, CFG_SIZE
);
465 ether1_writebuffer (dev
, &init_sa
, SA_ADDR
, SA_SIZE
);
466 ether1_writebuffer (dev
, &init_mc
, MC_ADDR
, MC_SIZE
);
467 ether1_writebuffer (dev
, &init_tdr
, TDR_ADDR
, TDR_SIZE
);
468 ether1_writebuffer (dev
, &init_nop
, NOP_ADDR
, NOP_SIZE
);
470 if (ether1_readw(dev
, CFG_ADDR
, cfg_t
, cfg_command
, NORMALIRQS
) != CMD_CONFIG
) {
471 printk (KERN_ERR
"%s: detected either RAM fault or compiler bug\n",
477 * setup circularly linked list of { rfd, rbd, buffer }, with
478 * all rfds circularly linked, rbds circularly linked.
479 * First rfd is linked to scp, first rbd is linked to first
480 * rfd. Last rbd has a suspend command.
482 addr
= RX_AREA_START
;
484 next
= addr
+ RFD_SIZE
+ RBD_SIZE
+ ETH_FRAME_LEN
+ 10;
485 next2
= next
+ RFD_SIZE
+ RBD_SIZE
+ ETH_FRAME_LEN
+ 10;
487 if (next2
>= RX_AREA_END
) {
488 next
= RX_AREA_START
;
489 init_rfd
.rfd_command
= RFD_CMDEL
| RFD_CMDSUSPEND
;
490 priv(dev
)->rx_tail
= addr
;
492 init_rfd
.rfd_command
= 0;
493 if (addr
== RX_AREA_START
)
494 init_rfd
.rfd_rbdoffset
= addr
+ RFD_SIZE
;
496 init_rfd
.rfd_rbdoffset
= 0;
497 init_rfd
.rfd_link
= next
;
498 init_rbd
.rbd_link
= next
+ RFD_SIZE
;
499 init_rbd
.rbd_bufl
= addr
+ RFD_SIZE
+ RBD_SIZE
;
501 ether1_writebuffer (dev
, &init_rfd
, addr
, RFD_SIZE
);
502 ether1_writebuffer (dev
, &init_rbd
, addr
+ RFD_SIZE
, RBD_SIZE
);
504 } while (next2
< RX_AREA_END
);
506 priv(dev
)->tx_link
= NOP_ADDR
;
507 priv(dev
)->tx_head
= NOP_ADDR
+ NOP_SIZE
;
508 priv(dev
)->tx_tail
= TDR_ADDR
;
509 priv(dev
)->rx_head
= RX_AREA_START
;
511 /* release reset & give 586 a prod */
512 priv(dev
)->resetting
= 1;
513 priv(dev
)->initialising
= 1;
514 writeb(CTRL_RST
, REG_CONTROL
);
515 writeb(0, REG_CONTROL
);
516 writeb(CTRL_CA
, REG_CONTROL
);
518 /* 586 should now unset iscp.busy */
519 timeout
= jiffies
+ HZ
/2;
520 while (ether1_readw(dev
, ISCP_ADDR
, iscp_t
, iscp_busy
, DISABLEIRQS
) == 1) {
521 if (time_after(jiffies
, timeout
)) {
522 printk (KERN_WARNING
"%s: can't initialise 82586: iscp is busy\n", dev
->name
);
527 /* check status of commands that we issued */
529 while (((status
= ether1_readw(dev
, CFG_ADDR
, cfg_t
, cfg_status
, DISABLEIRQS
))
530 & STAT_COMPLETE
) == 0) {
531 if (time_after(jiffies
, timeout
))
535 if ((status
& (STAT_COMPLETE
| STAT_OK
)) != (STAT_COMPLETE
| STAT_OK
)) {
536 printk (KERN_WARNING
"%s: can't initialise 82586: config status %04X\n", dev
->name
, status
);
537 printk (KERN_DEBUG
"%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev
->name
,
538 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_status
, NORMALIRQS
),
539 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_command
, NORMALIRQS
),
540 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_cbl_offset
, NORMALIRQS
),
541 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_rfa_offset
, NORMALIRQS
));
546 while (((status
= ether1_readw(dev
, SA_ADDR
, sa_t
, sa_status
, DISABLEIRQS
))
547 & STAT_COMPLETE
) == 0) {
548 if (time_after(jiffies
, timeout
))
552 if ((status
& (STAT_COMPLETE
| STAT_OK
)) != (STAT_COMPLETE
| STAT_OK
)) {
553 printk (KERN_WARNING
"%s: can't initialise 82586: set address status %04X\n", dev
->name
, status
);
554 printk (KERN_DEBUG
"%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev
->name
,
555 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_status
, NORMALIRQS
),
556 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_command
, NORMALIRQS
),
557 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_cbl_offset
, NORMALIRQS
),
558 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_rfa_offset
, NORMALIRQS
));
563 while (((status
= ether1_readw(dev
, MC_ADDR
, mc_t
, mc_status
, DISABLEIRQS
))
564 & STAT_COMPLETE
) == 0) {
565 if (time_after(jiffies
, timeout
))
569 if ((status
& (STAT_COMPLETE
| STAT_OK
)) != (STAT_COMPLETE
| STAT_OK
)) {
570 printk (KERN_WARNING
"%s: can't initialise 82586: set multicast status %04X\n", dev
->name
, status
);
571 printk (KERN_DEBUG
"%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev
->name
,
572 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_status
, NORMALIRQS
),
573 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_command
, NORMALIRQS
),
574 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_cbl_offset
, NORMALIRQS
),
575 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_rfa_offset
, NORMALIRQS
));
580 while (((status
= ether1_readw(dev
, TDR_ADDR
, tdr_t
, tdr_status
, DISABLEIRQS
))
581 & STAT_COMPLETE
) == 0) {
582 if (time_after(jiffies
, timeout
))
586 if ((status
& (STAT_COMPLETE
| STAT_OK
)) != (STAT_COMPLETE
| STAT_OK
)) {
587 printk (KERN_WARNING
"%s: can't tdr (ignored)\n", dev
->name
);
588 printk (KERN_DEBUG
"%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev
->name
,
589 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_status
, NORMALIRQS
),
590 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_command
, NORMALIRQS
),
591 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_cbl_offset
, NORMALIRQS
),
592 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_rfa_offset
, NORMALIRQS
));
594 status
= ether1_readw(dev
, TDR_ADDR
, tdr_t
, tdr_result
, DISABLEIRQS
);
595 if (status
& TDR_XCVRPROB
)
596 printk (KERN_WARNING
"%s: i/f failed tdr: transceiver problem\n", dev
->name
);
597 else if ((status
& (TDR_SHORT
|TDR_OPEN
)) && (status
& TDR_TIME
)) {
599 printk (KERN_WARNING
"%s: i/f failed tdr: cable %s %d.%d us away\n", dev
->name
,
600 status
& TDR_SHORT
? "short" : "open", (status
& TDR_TIME
) / 10,
601 (status
& TDR_TIME
) % 10);
603 printk (KERN_WARNING
"%s: i/f failed tdr: cable %s %d clks away\n", dev
->name
,
604 status
& TDR_SHORT
? "short" : "open", (status
& TDR_TIME
));
611 return failures
? 1 : 0;
614 /* ------------------------------------------------------------------------- */
617 ether1_txalloc (struct net_device
*dev
, int size
)
621 size
= (size
+ 1) & ~1;
622 tail
= priv(dev
)->tx_tail
;
624 if (priv(dev
)->tx_head
+ size
> TX_AREA_END
) {
625 if (tail
> priv(dev
)->tx_head
)
627 start
= TX_AREA_START
;
628 if (start
+ size
> tail
)
630 priv(dev
)->tx_head
= start
+ size
;
632 if (priv(dev
)->tx_head
< tail
&& (priv(dev
)->tx_head
+ size
) > tail
)
634 start
= priv(dev
)->tx_head
;
635 priv(dev
)->tx_head
+= size
;
642 ether1_open (struct net_device
*dev
)
644 if (!is_valid_ether_addr(dev
->dev_addr
)) {
645 printk(KERN_WARNING
"%s: invalid ethernet MAC address\n",
650 if (request_irq(dev
->irq
, ether1_interrupt
, 0, "ether1", dev
))
653 memset (&priv(dev
)->stats
, 0, sizeof (struct net_device_stats
));
655 if (ether1_init_for_open (dev
)) {
656 free_irq (dev
->irq
, dev
);
660 netif_start_queue(dev
);
666 ether1_timeout(struct net_device
*dev
)
668 printk(KERN_WARNING
"%s: transmit timeout, network cable problem?\n",
670 printk(KERN_WARNING
"%s: resetting device\n", dev
->name
);
674 if (ether1_init_for_open (dev
))
675 printk (KERN_ERR
"%s: unable to restart interface\n", dev
->name
);
677 priv(dev
)->stats
.tx_errors
++;
678 netif_wake_queue(dev
);
682 ether1_sendpacket (struct sk_buff
*skb
, struct net_device
*dev
)
684 int tmp
, tst
, nopaddr
, txaddr
, tbdaddr
, dataddr
;
690 if (priv(dev
)->restart
) {
691 printk(KERN_WARNING
"%s: resetting device\n", dev
->name
);
695 if (ether1_init_for_open(dev
))
696 printk(KERN_ERR
"%s: unable to restart interface\n", dev
->name
);
698 priv(dev
)->restart
= 0;
701 if (skb
->len
< ETH_ZLEN
) {
702 if (skb_padto(skb
, ETH_ZLEN
))
707 * insert packet followed by a nop
709 txaddr
= ether1_txalloc (dev
, TX_SIZE
);
710 tbdaddr
= ether1_txalloc (dev
, TBD_SIZE
);
711 dataddr
= ether1_txalloc (dev
, skb
->len
);
712 nopaddr
= ether1_txalloc (dev
, NOP_SIZE
);
715 tx
.tx_command
= CMD_TX
| CMD_INTR
;
716 tx
.tx_link
= nopaddr
;
717 tx
.tx_tbdoffset
= tbdaddr
;
718 tbd
.tbd_opts
= TBD_EOL
| skb
->len
;
719 tbd
.tbd_link
= I82586_NULL
;
720 tbd
.tbd_bufl
= dataddr
;
723 nop
.nop_command
= CMD_NOP
;
724 nop
.nop_link
= nopaddr
;
726 local_irq_save(flags
);
727 ether1_writebuffer (dev
, &tx
, txaddr
, TX_SIZE
);
728 ether1_writebuffer (dev
, &tbd
, tbdaddr
, TBD_SIZE
);
729 ether1_writebuffer (dev
, skb
->data
, dataddr
, skb
->len
);
730 ether1_writebuffer (dev
, &nop
, nopaddr
, NOP_SIZE
);
731 tmp
= priv(dev
)->tx_link
;
732 priv(dev
)->tx_link
= nopaddr
;
734 /* now reset the previous nop pointer */
735 ether1_writew(dev
, txaddr
, tmp
, nop_t
, nop_link
, NORMALIRQS
);
737 local_irq_restore(flags
);
739 /* handle transmit */
740 dev
->trans_start
= jiffies
;
742 /* check to see if we have room for a full sized ether frame */
743 tmp
= priv(dev
)->tx_head
;
744 tst
= ether1_txalloc (dev
, TX_SIZE
+ TBD_SIZE
+ NOP_SIZE
+ ETH_FRAME_LEN
);
745 priv(dev
)->tx_head
= tmp
;
749 netif_stop_queue(dev
);
756 ether1_xmit_done (struct net_device
*dev
)
761 caddr
= priv(dev
)->tx_tail
;
764 ether1_readbuffer (dev
, &nop
, caddr
, NOP_SIZE
);
766 switch (nop
.nop_command
& CMD_MASK
) {
769 if (ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_cbl_offset
, NORMALIRQS
)
770 != (unsigned short)I82586_NULL
) {
771 ether1_writew(dev
, SCB_CMDCUCSTART
| SCB_CMDRXSTART
, SCB_ADDR
, scb_t
,
772 scb_command
, NORMALIRQS
);
773 writeb(CTRL_CA
, REG_CONTROL
);
775 priv(dev
)->tx_tail
= NOP_ADDR
;
779 if (nop
.nop_link
== caddr
) {
780 if (priv(dev
)->initialising
== 0)
781 printk (KERN_WARNING
"%s: strange command complete with no tx command!\n", dev
->name
);
783 priv(dev
)->initialising
= 0;
786 if (caddr
== nop
.nop_link
)
788 caddr
= nop
.nop_link
;
792 if (nop
.nop_status
& STAT_COMPLETE
)
794 printk (KERN_ERR
"%s: strange command complete without completed command\n", dev
->name
);
795 priv(dev
)->restart
= 1;
799 printk (KERN_WARNING
"%s: strange command %d complete! (offset %04X)", dev
->name
,
800 nop
.nop_command
& CMD_MASK
, caddr
);
801 priv(dev
)->restart
= 1;
805 while (nop
.nop_status
& STAT_COMPLETE
) {
806 if (nop
.nop_status
& STAT_OK
) {
807 priv(dev
)->stats
.tx_packets
++;
808 priv(dev
)->stats
.collisions
+= (nop
.nop_status
& STAT_COLLISIONS
);
810 priv(dev
)->stats
.tx_errors
++;
812 if (nop
.nop_status
& STAT_COLLAFTERTX
)
813 priv(dev
)->stats
.collisions
++;
814 if (nop
.nop_status
& STAT_NOCARRIER
)
815 priv(dev
)->stats
.tx_carrier_errors
++;
816 if (nop
.nop_status
& STAT_TXLOSTCTS
)
817 printk (KERN_WARNING
"%s: cts lost\n", dev
->name
);
818 if (nop
.nop_status
& STAT_TXSLOWDMA
)
819 priv(dev
)->stats
.tx_fifo_errors
++;
820 if (nop
.nop_status
& STAT_COLLEXCESSIVE
)
821 priv(dev
)->stats
.collisions
+= 16;
824 if (nop
.nop_link
== caddr
) {
825 printk (KERN_ERR
"%s: tx buffer chaining error: tx command points to itself\n", dev
->name
);
829 caddr
= nop
.nop_link
;
830 ether1_readbuffer (dev
, &nop
, caddr
, NOP_SIZE
);
831 if ((nop
.nop_command
& CMD_MASK
) != CMD_NOP
) {
832 printk (KERN_ERR
"%s: tx buffer chaining error: no nop after tx command\n", dev
->name
);
836 if (caddr
== nop
.nop_link
)
839 caddr
= nop
.nop_link
;
840 ether1_readbuffer (dev
, &nop
, caddr
, NOP_SIZE
);
841 if ((nop
.nop_command
& CMD_MASK
) != CMD_TX
) {
842 printk (KERN_ERR
"%s: tx buffer chaining error: no tx command after nop\n", dev
->name
);
846 priv(dev
)->tx_tail
= caddr
;
848 caddr
= priv(dev
)->tx_head
;
849 tst
= ether1_txalloc (dev
, TX_SIZE
+ TBD_SIZE
+ NOP_SIZE
+ ETH_FRAME_LEN
);
850 priv(dev
)->tx_head
= caddr
;
852 netif_wake_queue(dev
);
856 ether1_recv_done (struct net_device
*dev
)
859 int nexttail
, rbdaddr
;
863 status
= ether1_readw(dev
, priv(dev
)->rx_head
, rfd_t
, rfd_status
, NORMALIRQS
);
864 if ((status
& RFD_COMPLETE
) == 0)
867 rbdaddr
= ether1_readw(dev
, priv(dev
)->rx_head
, rfd_t
, rfd_rbdoffset
, NORMALIRQS
);
868 ether1_readbuffer (dev
, &rbd
, rbdaddr
, RBD_SIZE
);
870 if ((rbd
.rbd_status
& (RBD_EOF
| RBD_ACNTVALID
)) == (RBD_EOF
| RBD_ACNTVALID
)) {
871 int length
= rbd
.rbd_status
& RBD_ACNT
;
874 length
= (length
+ 1) & ~1;
875 skb
= dev_alloc_skb (length
+ 2);
878 skb_reserve (skb
, 2);
880 ether1_readbuffer (dev
, skb_put (skb
, length
), rbd
.rbd_bufl
, length
);
882 skb
->protocol
= eth_type_trans (skb
, dev
);
884 priv(dev
)->stats
.rx_packets
++;
886 priv(dev
)->stats
.rx_dropped
++;
888 printk(KERN_WARNING
"%s: %s\n", dev
->name
,
889 (rbd
.rbd_status
& RBD_EOF
) ? "oversized packet" : "acnt not valid");
890 priv(dev
)->stats
.rx_dropped
++;
893 nexttail
= ether1_readw(dev
, priv(dev
)->rx_tail
, rfd_t
, rfd_link
, NORMALIRQS
);
894 /* nexttail should be rx_head */
895 if (nexttail
!= priv(dev
)->rx_head
)
896 printk(KERN_ERR
"%s: receiver buffer chaining error (%04X != %04X)\n",
897 dev
->name
, nexttail
, priv(dev
)->rx_head
);
898 ether1_writew(dev
, RFD_CMDEL
| RFD_CMDSUSPEND
, nexttail
, rfd_t
, rfd_command
, NORMALIRQS
);
899 ether1_writew(dev
, 0, priv(dev
)->rx_tail
, rfd_t
, rfd_command
, NORMALIRQS
);
900 ether1_writew(dev
, 0, priv(dev
)->rx_tail
, rfd_t
, rfd_status
, NORMALIRQS
);
901 ether1_writew(dev
, 0, priv(dev
)->rx_tail
, rfd_t
, rfd_rbdoffset
, NORMALIRQS
);
903 priv(dev
)->rx_tail
= nexttail
;
904 priv(dev
)->rx_head
= ether1_readw(dev
, priv(dev
)->rx_head
, rfd_t
, rfd_link
, NORMALIRQS
);
909 ether1_interrupt (int irq
, void *dev_id
)
911 struct net_device
*dev
= (struct net_device
*)dev_id
;
914 status
= ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_status
, NORMALIRQS
);
917 ether1_writew(dev
, status
& (SCB_STRNR
| SCB_STCNA
| SCB_STFR
| SCB_STCX
),
918 SCB_ADDR
, scb_t
, scb_command
, NORMALIRQS
);
919 writeb(CTRL_CA
| CTRL_ACK
, REG_CONTROL
);
920 if (status
& SCB_STCX
) {
921 ether1_xmit_done (dev
);
923 if (status
& SCB_STCNA
) {
924 if (priv(dev
)->resetting
== 0)
925 printk (KERN_WARNING
"%s: CU went not ready ???\n", dev
->name
);
927 priv(dev
)->resetting
+= 1;
928 if (ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_cbl_offset
, NORMALIRQS
)
929 != (unsigned short)I82586_NULL
) {
930 ether1_writew(dev
, SCB_CMDCUCSTART
, SCB_ADDR
, scb_t
, scb_command
, NORMALIRQS
);
931 writeb(CTRL_CA
, REG_CONTROL
);
933 if (priv(dev
)->resetting
== 2)
934 priv(dev
)->resetting
= 0;
936 if (status
& SCB_STFR
) {
937 ether1_recv_done (dev
);
939 if (status
& SCB_STRNR
) {
940 if (ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_status
, NORMALIRQS
) & SCB_STRXSUSP
) {
941 printk (KERN_WARNING
"%s: RU went not ready: RU suspended\n", dev
->name
);
942 ether1_writew(dev
, SCB_CMDRXRESUME
, SCB_ADDR
, scb_t
, scb_command
, NORMALIRQS
);
943 writeb(CTRL_CA
, REG_CONTROL
);
944 priv(dev
)->stats
.rx_dropped
++; /* we suspended due to lack of buffer space */
946 printk(KERN_WARNING
"%s: RU went not ready: %04X\n", dev
->name
,
947 ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_status
, NORMALIRQS
));
948 printk (KERN_WARNING
"RU ptr = %04X\n", ether1_readw(dev
, SCB_ADDR
, scb_t
, scb_rfa_offset
,
952 writeb(CTRL_ACK
, REG_CONTROL
);
958 ether1_close (struct net_device
*dev
)
962 free_irq(dev
->irq
, dev
);
967 static struct net_device_stats
*
968 ether1_getstats (struct net_device
*dev
)
970 return &priv(dev
)->stats
;
974 * Set or clear the multicast filter for this adaptor.
975 * num_addrs == -1 Promiscuous mode, receive all packets.
976 * num_addrs == 0 Normal mode, clear multicast list.
977 * num_addrs > 0 Multicast mode, receive normal and MC packets, and do
978 * best-effort filtering.
981 ether1_setmulticastlist (struct net_device
*dev
)
985 /* ------------------------------------------------------------------------- */
987 static void __devinit
ether1_banner(void)
989 static unsigned int version_printed
= 0;
991 if (net_debug
&& version_printed
++ == 0)
992 printk(KERN_INFO
"%s", version
);
996 ether1_probe(struct expansion_card
*ec
, const struct ecard_id
*id
)
998 struct net_device
*dev
;
1003 ret
= ecard_request_resources(ec
);
1007 dev
= alloc_etherdev(sizeof(struct ether1_priv
));
1013 SET_MODULE_OWNER(dev
);
1014 SET_NETDEV_DEV(dev
, &ec
->dev
);
1017 priv(dev
)->base
= ioremap(ecard_resource_start(ec
, ECARD_RES_IOCFAST
),
1018 ecard_resource_len(ec
, ECARD_RES_IOCFAST
));
1019 if (!priv(dev
)->base
) {
1024 if ((priv(dev
)->bus_type
= ether1_reset(dev
)) == 0) {
1029 for (i
= 0; i
< 6; i
++)
1030 dev
->dev_addr
[i
] = readb(IDPROM_ADDRESS
+ (i
<< 2));
1032 if (ether1_init_2(dev
)) {
1037 dev
->open
= ether1_open
;
1038 dev
->stop
= ether1_close
;
1039 dev
->hard_start_xmit
= ether1_sendpacket
;
1040 dev
->get_stats
= ether1_getstats
;
1041 dev
->set_multicast_list
= ether1_setmulticastlist
;
1042 dev
->tx_timeout
= ether1_timeout
;
1043 dev
->watchdog_timeo
= 5 * HZ
/ 100;
1045 ret
= register_netdev(dev
);
1049 printk(KERN_INFO
"%s: ether1 in slot %d, ",
1050 dev
->name
, ec
->slot_no
);
1052 for (i
= 0; i
< 6; i
++)
1053 printk ("%2.2x%c", dev
->dev_addr
[i
], i
== 5 ? '\n' : ':');
1055 ecard_set_drvdata(ec
, dev
);
1059 if (priv(dev
)->base
)
1060 iounmap(priv(dev
)->base
);
1063 ecard_release_resources(ec
);
1068 static void __devexit
ether1_remove(struct expansion_card
*ec
)
1070 struct net_device
*dev
= ecard_get_drvdata(ec
);
1072 ecard_set_drvdata(ec
, NULL
);
1074 unregister_netdev(dev
);
1075 iounmap(priv(dev
)->base
);
1077 ecard_release_resources(ec
);
1080 static const struct ecard_id ether1_ids
[] = {
1081 { MANU_ACORN
, PROD_ACORN_ETHER1
},
1085 static struct ecard_driver ether1_driver
= {
1086 .probe
= ether1_probe
,
1087 .remove
= __devexit_p(ether1_remove
),
1088 .id_table
= ether1_ids
,
1094 static int __init
ether1_init(void)
1096 return ecard_register_driver(ðer1_driver
);
1099 static void __exit
ether1_exit(void)
1101 ecard_remove_driver(ðer1_driver
);
1104 module_init(ether1_init
);
1105 module_exit(ether1_exit
);
1107 MODULE_LICENSE("GPL");