sound/isa/opti9xx/miro.h

   1 #ifndef _MIRO_H_
   2 #define _MIRO_H_
   3
   4 #define ACI_REG_COMMAND         0       /* write register offset */
   5 #define ACI_REG_STATUS          1       /* read register offset */
   6 #define ACI_REG_BUSY            2       /* busy register offset */
   7 #define ACI_REG_RDS             2       /* PCM20: RDS register offset */
   8 #define ACI_MINTIME             500     /* ACI time out limit */
   9
  10 #define ACI_SET_MUTE            0x0d
  11 #define ACI_SET_POWERAMP        0x0f
  12 #define ACI_SET_TUNERMUTE       0xa3
  13 #define ACI_SET_TUNERMONO       0xa4
  14 #define ACI_SET_IDE             0xd0
  15 #define ACI_SET_WSS             0xd1
  16 #define ACI_SET_SOLOMODE        0xd2
  17 #define ACI_SET_PREAMP          0x03
  18 #define ACI_GET_PREAMP          0x21
  19 #define ACI_WRITE_TUNE          0xa7
  20 #define ACI_READ_TUNERSTEREO    0xa8
  21 #define ACI_READ_TUNERSTATION   0xa9
  22 #define ACI_READ_VERSION        0xf1
  23 #define ACI_READ_IDCODE         0xf2
  24 #define ACI_INIT                0xff
  25 #define ACI_STATUS              0xf0
  26 #define ACI_S_GENERAL           0x00
  27 #define ACI_ERROR_OP            0xdf
  28
  29 /* ACI Mixer */
  30
  31 /* These are the values for the right channel GET registers.
  32    Add an offset of 0x01 for the left channel register.
  33    (left=right+0x01) */
  34
  35 #define ACI_GET_MASTER          0x03
  36 #define ACI_GET_MIC             0x05
  37 #define ACI_GET_LINE            0x07
  38 #define ACI_GET_CD              0x09
  39 #define ACI_GET_SYNTH           0x0b
  40 #define ACI_GET_PCM             0x0d
  41 #define ACI_GET_LINE1           0x10    /* Radio on PCM20 */
  42 #define ACI_GET_LINE2           0x12
  43
  44 #define ACI_GET_EQ1             0x22    /* from Bass ... */
  45 #define ACI_GET_EQ2             0x24
  46 #define ACI_GET_EQ3             0x26
  47 #define ACI_GET_EQ4             0x28
  48 #define ACI_GET_EQ5             0x2a
  49 #define ACI_GET_EQ6             0x2c
  50 #define ACI_GET_EQ7             0x2e    /* ... to Treble */
  51
  52 /* And these are the values for the right channel SET registers.
  53    For left channel access you have to add an offset of 0x08.
  54    MASTER is an exception, which needs an offset of 0x01 */
  55
  56 #define ACI_SET_MASTER          0x00
  57 #define ACI_SET_MIC             0x30
  58 #define ACI_SET_LINE            0x31
  59 #define ACI_SET_CD              0x34
  60 #define ACI_SET_SYNTH           0x33
  61 #define ACI_SET_PCM             0x32
  62 #define ACI_SET_LINE1           0x35    /* Radio on PCM20 */
  63 #define ACI_SET_LINE2           0x36
  64
  65 #define ACI_SET_EQ1             0x40    /* from Bass ... */
  66 #define ACI_SET_EQ2             0x41
  67 #define ACI_SET_EQ3             0x42
  68 #define ACI_SET_EQ4             0x43
  69 #define ACI_SET_EQ5             0x44
  70 #define ACI_SET_EQ6             0x45
  71 #define ACI_SET_EQ7             0x46    /* ... to Treble */
  72
  73 #endif  /* _MIRO_H_ */