1 /******************************************************************************
3 * Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
31 * NOTE: This file (iwl-base.c) is used to build to multiple hardware targets
32 * by defining IWL to either 3945 or 4965. The Makefile used when building
33 * the base targets will create base-3945.o and base-4965.o
35 * The eventual goal is to move as many of the #if IWL / #endif blocks out of
36 * this file and into the hardware specific implementation files (iwl-XXXX.c)
37 * and leave only the common (non #ifdef sprinkled) code in this file
40 #include <linux/kernel.h>
41 #include <linux/module.h>
42 #include <linux/version.h>
43 #include <linux/init.h>
44 #include <linux/pci.h>
45 #include <linux/dma-mapping.h>
46 #include <linux/delay.h>
47 #include <linux/skbuff.h>
48 #include <linux/netdevice.h>
49 #include <linux/wireless.h>
50 #include <linux/firmware.h>
51 #include <linux/etherdevice.h>
52 #include <linux/if_arp.h>
54 #include <net/ieee80211_radiotap.h>
55 #include <net/mac80211.h>
57 #include <asm/div64.h>
63 #include "iwl-helpers.h"
65 #ifdef CONFIG_IWLWIFI_DEBUG
69 /******************************************************************************
73 ******************************************************************************/
75 /* module parameters */
76 int iwl_param_disable_hw_scan
;
78 int iwl_param_disable
; /* def: enable radio */
79 int iwl_param_antenna
; /* def: 0 = both antennas (use diversity) */
80 int iwl_param_hwcrypto
; /* def: using software encryption */
81 int iwl_param_qos_enable
= 1;
82 int iwl_param_queues_num
= IWL_MAX_NUM_QUEUES
;
85 * module name, copyright, version, etc.
86 * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
89 #define DRV_DESCRIPTION \
90 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
92 #ifdef CONFIG_IWLWIFI_DEBUG
98 #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT
104 #define IWLWIFI_VERSION "1.1.17k" VD VS
105 #define DRV_COPYRIGHT "Copyright(c) 2003-2007 Intel Corporation"
106 #define DRV_VERSION IWLWIFI_VERSION
108 /* Change firmware file name, using "-" and incrementing number,
109 * *only* when uCode interface or architecture changes so that it
110 * is not compatible with earlier drivers.
111 * This number will also appear in << 8 position of 1st dword of uCode file */
112 #define IWL3945_UCODE_API "-1"
114 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
115 MODULE_VERSION(DRV_VERSION
);
116 MODULE_AUTHOR(DRV_COPYRIGHT
);
117 MODULE_LICENSE("GPL");
119 __le16
*ieee80211_get_qos_ctrl(struct ieee80211_hdr
*hdr
)
121 u16 fc
= le16_to_cpu(hdr
->frame_control
);
122 int hdr_len
= ieee80211_get_hdrlen(fc
);
124 if ((fc
& 0x00cc) == (IEEE80211_STYPE_QOS_DATA
| IEEE80211_FTYPE_DATA
))
125 return (__le16
*) ((u8
*) hdr
+ hdr_len
- QOS_CONTROL_LEN
);
129 static const struct ieee80211_hw_mode
*iwl_get_hw_mode(
130 struct iwl_priv
*priv
, int mode
)
134 for (i
= 0; i
< 3; i
++)
135 if (priv
->modes
[i
].mode
== mode
)
136 return &priv
->modes
[i
];
141 static int iwl_is_empty_essid(const char *essid
, int essid_len
)
143 /* Single white space is for Linksys APs */
144 if (essid_len
== 1 && essid
[0] == ' ')
147 /* Otherwise, if the entire essid is 0, we assume it is hidden */
150 if (essid
[essid_len
] != '\0')
157 static const char *iwl_escape_essid(const char *essid
, u8 essid_len
)
159 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
160 const char *s
= essid
;
163 if (iwl_is_empty_essid(essid
, essid_len
)) {
164 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
168 essid_len
= min(essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
169 while (essid_len
--) {
181 static void iwl_print_hex_dump(int level
, void *p
, u32 len
)
183 #ifdef CONFIG_IWLWIFI_DEBUG
184 if (!(iwl_debug_level
& level
))
187 print_hex_dump(KERN_DEBUG
, "iwl data: ", DUMP_PREFIX_OFFSET
, 16, 1,
192 /*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
195 * Theory of operation
197 * A queue is a circular buffers with 'Read' and 'Write' pointers.
198 * 2 empty entries always kept in the buffer to protect from overflow.
200 * For Tx queue, there are low mark and high mark limits. If, after queuing
201 * the packet for Tx, free space become < low mark, Tx queue stopped. When
202 * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
205 * The IWL operates with six queues, one receive queue in the device's
206 * sram, one transmit queue for sending commands to the device firmware,
207 * and four transmit queues for data.
208 ***************************************************/
210 static int iwl_queue_space(const struct iwl_queue
*q
)
212 int s
= q
->last_used
- q
->first_empty
;
214 if (q
->last_used
> q
->first_empty
)
219 /* keep some reserve to not confuse empty and full situations */
226 /* XXX: n_bd must be power-of-two size */
227 static inline int iwl_queue_inc_wrap(int index
, int n_bd
)
229 return ++index
& (n_bd
- 1);
232 /* XXX: n_bd must be power-of-two size */
233 static inline int iwl_queue_dec_wrap(int index
, int n_bd
)
235 return --index
& (n_bd
- 1);
238 static inline int x2_queue_used(const struct iwl_queue
*q
, int i
)
240 return q
->first_empty
> q
->last_used
?
241 (i
>= q
->last_used
&& i
< q
->first_empty
) :
242 !(i
< q
->last_used
&& i
>= q
->first_empty
);
245 static inline u8
get_cmd_index(struct iwl_queue
*q
, u32 index
, int is_huge
)
250 return index
& (q
->n_window
- 1);
253 static int iwl_queue_init(struct iwl_priv
*priv
, struct iwl_queue
*q
,
254 int count
, int slots_num
, u32 id
)
257 q
->n_window
= slots_num
;
260 /* count must be power-of-two size, otherwise iwl_queue_inc_wrap
261 * and iwl_queue_dec_wrap are broken. */
262 BUG_ON(!is_power_of_2(count
));
264 /* slots_num must be power-of-two size, otherwise
265 * get_cmd_index is broken. */
266 BUG_ON(!is_power_of_2(slots_num
));
268 q
->low_mark
= q
->n_window
/ 4;
272 q
->high_mark
= q
->n_window
/ 8;
273 if (q
->high_mark
< 2)
276 q
->first_empty
= q
->last_used
= 0;
281 static int iwl_tx_queue_alloc(struct iwl_priv
*priv
,
282 struct iwl_tx_queue
*txq
, u32 id
)
284 struct pci_dev
*dev
= priv
->pci_dev
;
286 if (id
!= IWL_CMD_QUEUE_NUM
) {
287 txq
->txb
= kmalloc(sizeof(txq
->txb
[0]) *
288 TFD_QUEUE_SIZE_MAX
, GFP_KERNEL
);
290 IWL_ERROR("kmalloc for auxilary BD "
291 "structures failed\n");
297 txq
->bd
= pci_alloc_consistent(dev
,
298 sizeof(txq
->bd
[0]) * TFD_QUEUE_SIZE_MAX
,
302 IWL_ERROR("pci_alloc_consistent(%zd) failed\n",
303 sizeof(txq
->bd
[0]) * TFD_QUEUE_SIZE_MAX
);
319 int iwl_tx_queue_init(struct iwl_priv
*priv
,
320 struct iwl_tx_queue
*txq
, int slots_num
, u32 txq_id
)
322 struct pci_dev
*dev
= priv
->pci_dev
;
326 /* alocate command space + one big command for scan since scan
327 * command is very huge the system will not have two scan at the
329 len
= sizeof(struct iwl_cmd
) * slots_num
;
330 if (txq_id
== IWL_CMD_QUEUE_NUM
)
331 len
+= IWL_MAX_SCAN_SIZE
;
332 txq
->cmd
= pci_alloc_consistent(dev
, len
, &txq
->dma_addr_cmd
);
336 rc
= iwl_tx_queue_alloc(priv
, txq
, txq_id
);
338 pci_free_consistent(dev
, len
, txq
->cmd
, txq
->dma_addr_cmd
);
342 txq
->need_update
= 0;
344 /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
345 * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
346 BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX
& (TFD_QUEUE_SIZE_MAX
- 1));
347 iwl_queue_init(priv
, &txq
->q
, TFD_QUEUE_SIZE_MAX
, slots_num
, txq_id
);
349 iwl_hw_tx_queue_init(priv
, txq
);
355 * iwl_tx_queue_free - Deallocate DMA queue.
356 * @txq: Transmit queue to deallocate.
358 * Empty queue by removing and destroying all BD's.
359 * Free all buffers. txq itself is not freed.
362 void iwl_tx_queue_free(struct iwl_priv
*priv
, struct iwl_tx_queue
*txq
)
364 struct iwl_queue
*q
= &txq
->q
;
365 struct pci_dev
*dev
= priv
->pci_dev
;
371 /* first, empty all BD's */
372 for (; q
->first_empty
!= q
->last_used
;
373 q
->last_used
= iwl_queue_inc_wrap(q
->last_used
, q
->n_bd
))
374 iwl_hw_txq_free_tfd(priv
, txq
);
376 len
= sizeof(struct iwl_cmd
) * q
->n_window
;
377 if (q
->id
== IWL_CMD_QUEUE_NUM
)
378 len
+= IWL_MAX_SCAN_SIZE
;
380 pci_free_consistent(dev
, len
, txq
->cmd
, txq
->dma_addr_cmd
);
382 /* free buffers belonging to queue itself */
384 pci_free_consistent(dev
, sizeof(struct iwl_tfd_frame
) *
385 txq
->q
.n_bd
, txq
->bd
, txq
->q
.dma_addr
);
392 /* 0 fill whole structure */
393 memset(txq
, 0, sizeof(*txq
));
396 const u8 BROADCAST_ADDR
[ETH_ALEN
] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
398 /*************** STATION TABLE MANAGEMENT ****
400 * NOTE: This needs to be overhauled to better synchronize between
401 * how the iwl-4965.c is using iwl_hw_find_station vs. iwl-3945.c
403 * mac80211 should also be examined to determine if sta_info is duplicating
404 * the functionality provided here
407 /**************************************************************/
408 #if 0 /* temparary disable till we add real remove station */
409 static u8
iwl_remove_station(struct iwl_priv
*priv
, const u8
*addr
, int is_ap
)
411 int index
= IWL_INVALID_STATION
;
415 spin_lock_irqsave(&priv
->sta_lock
, flags
);
419 else if (is_broadcast_ether_addr(addr
))
420 index
= priv
->hw_setting
.bcast_sta_id
;
422 for (i
= IWL_STA_ID
; i
< priv
->hw_setting
.max_stations
; i
++)
423 if (priv
->stations
[i
].used
&&
424 !compare_ether_addr(priv
->stations
[i
].sta
.sta
.addr
,
430 if (unlikely(index
== IWL_INVALID_STATION
))
433 if (priv
->stations
[index
].used
) {
434 priv
->stations
[index
].used
= 0;
435 priv
->num_stations
--;
438 BUG_ON(priv
->num_stations
< 0);
441 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
445 static void iwl_clear_stations_table(struct iwl_priv
*priv
)
449 spin_lock_irqsave(&priv
->sta_lock
, flags
);
451 priv
->num_stations
= 0;
452 memset(priv
->stations
, 0, sizeof(priv
->stations
));
454 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
458 u8
iwl_add_station(struct iwl_priv
*priv
, const u8
*addr
, int is_ap
, u8 flags
)
461 int index
= IWL_INVALID_STATION
;
462 struct iwl_station_entry
*station
;
463 unsigned long flags_spin
;
464 DECLARE_MAC_BUF(mac
);
467 spin_lock_irqsave(&priv
->sta_lock
, flags_spin
);
470 else if (is_broadcast_ether_addr(addr
))
471 index
= priv
->hw_setting
.bcast_sta_id
;
473 for (i
= IWL_STA_ID
; i
< priv
->hw_setting
.max_stations
; i
++) {
474 if (!compare_ether_addr(priv
->stations
[i
].sta
.sta
.addr
,
480 if (!priv
->stations
[i
].used
&&
481 index
== IWL_INVALID_STATION
)
485 /* These twh conditions has the same outcome but keep them separate
486 since they have different meaning */
487 if (unlikely(index
== IWL_INVALID_STATION
)) {
488 spin_unlock_irqrestore(&priv
->sta_lock
, flags_spin
);
492 if (priv
->stations
[index
].used
&&
493 !compare_ether_addr(priv
->stations
[index
].sta
.sta
.addr
, addr
)) {
494 spin_unlock_irqrestore(&priv
->sta_lock
, flags_spin
);
498 IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index
, print_mac(mac
, addr
));
499 station
= &priv
->stations
[index
];
501 priv
->num_stations
++;
503 memset(&station
->sta
, 0, sizeof(struct iwl_addsta_cmd
));
504 memcpy(station
->sta
.sta
.addr
, addr
, ETH_ALEN
);
505 station
->sta
.mode
= 0;
506 station
->sta
.sta
.sta_id
= index
;
507 station
->sta
.station_flags
= 0;
509 rate
= (priv
->phymode
== MODE_IEEE80211A
) ? IWL_RATE_6M_PLCP
:
510 IWL_RATE_1M_PLCP
| priv
->hw_setting
.cck_flag
;
512 /* Turn on both antennas for the station... */
513 station
->sta
.rate_n_flags
=
514 iwl_hw_set_rate_n_flags(rate
, RATE_MCS_ANT_AB_MSK
);
515 station
->current_rate
.rate_n_flags
=
516 le16_to_cpu(station
->sta
.rate_n_flags
);
518 spin_unlock_irqrestore(&priv
->sta_lock
, flags_spin
);
519 iwl_send_add_station(priv
, &station
->sta
, flags
);
524 /*************** DRIVER STATUS FUNCTIONS *****/
526 static inline int iwl_is_ready(struct iwl_priv
*priv
)
528 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
529 * set but EXIT_PENDING is not */
530 return test_bit(STATUS_READY
, &priv
->status
) &&
531 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) &&
532 !test_bit(STATUS_EXIT_PENDING
, &priv
->status
);
535 static inline int iwl_is_alive(struct iwl_priv
*priv
)
537 return test_bit(STATUS_ALIVE
, &priv
->status
);
540 static inline int iwl_is_init(struct iwl_priv
*priv
)
542 return test_bit(STATUS_INIT
, &priv
->status
);
545 static inline int iwl_is_rfkill(struct iwl_priv
*priv
)
547 return test_bit(STATUS_RF_KILL_HW
, &priv
->status
) ||
548 test_bit(STATUS_RF_KILL_SW
, &priv
->status
);
551 static inline int iwl_is_ready_rf(struct iwl_priv
*priv
)
554 if (iwl_is_rfkill(priv
))
557 return iwl_is_ready(priv
);
560 /*************** HOST COMMAND QUEUE FUNCTIONS *****/
562 #define IWL_CMD(x) case x : return #x
564 static const char *get_cmd_string(u8 cmd
)
567 IWL_CMD(REPLY_ALIVE
);
568 IWL_CMD(REPLY_ERROR
);
570 IWL_CMD(REPLY_RXON_ASSOC
);
571 IWL_CMD(REPLY_QOS_PARAM
);
572 IWL_CMD(REPLY_RXON_TIMING
);
573 IWL_CMD(REPLY_ADD_STA
);
574 IWL_CMD(REPLY_REMOVE_STA
);
575 IWL_CMD(REPLY_REMOVE_ALL_STA
);
576 IWL_CMD(REPLY_3945_RX
);
578 IWL_CMD(REPLY_RATE_SCALE
);
579 IWL_CMD(REPLY_LEDS_CMD
);
580 IWL_CMD(REPLY_TX_LINK_QUALITY_CMD
);
581 IWL_CMD(RADAR_NOTIFICATION
);
582 IWL_CMD(REPLY_QUIET_CMD
);
583 IWL_CMD(REPLY_CHANNEL_SWITCH
);
584 IWL_CMD(CHANNEL_SWITCH_NOTIFICATION
);
585 IWL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD
);
586 IWL_CMD(SPECTRUM_MEASURE_NOTIFICATION
);
587 IWL_CMD(POWER_TABLE_CMD
);
588 IWL_CMD(PM_SLEEP_NOTIFICATION
);
589 IWL_CMD(PM_DEBUG_STATISTIC_NOTIFIC
);
590 IWL_CMD(REPLY_SCAN_CMD
);
591 IWL_CMD(REPLY_SCAN_ABORT_CMD
);
592 IWL_CMD(SCAN_START_NOTIFICATION
);
593 IWL_CMD(SCAN_RESULTS_NOTIFICATION
);
594 IWL_CMD(SCAN_COMPLETE_NOTIFICATION
);
595 IWL_CMD(BEACON_NOTIFICATION
);
596 IWL_CMD(REPLY_TX_BEACON
);
597 IWL_CMD(WHO_IS_AWAKE_NOTIFICATION
);
598 IWL_CMD(QUIET_NOTIFICATION
);
599 IWL_CMD(REPLY_TX_PWR_TABLE_CMD
);
600 IWL_CMD(MEASURE_ABORT_NOTIFICATION
);
601 IWL_CMD(REPLY_BT_CONFIG
);
602 IWL_CMD(REPLY_STATISTICS_CMD
);
603 IWL_CMD(STATISTICS_NOTIFICATION
);
604 IWL_CMD(REPLY_CARD_STATE_CMD
);
605 IWL_CMD(CARD_STATE_NOTIFICATION
);
606 IWL_CMD(MISSED_BEACONS_NOTIFICATION
);
613 #define HOST_COMPLETE_TIMEOUT (HZ / 2)
616 * iwl_enqueue_hcmd - enqueue a uCode command
617 * @priv: device private data point
618 * @cmd: a point to the ucode command structure
620 * The function returns < 0 values to indicate the operation is
621 * failed. On success, it turns the index (> 0) of command in the
624 static int iwl_enqueue_hcmd(struct iwl_priv
*priv
, struct iwl_host_cmd
*cmd
)
626 struct iwl_tx_queue
*txq
= &priv
->txq
[IWL_CMD_QUEUE_NUM
];
627 struct iwl_queue
*q
= &txq
->q
;
628 struct iwl_tfd_frame
*tfd
;
630 struct iwl_cmd
*out_cmd
;
632 u16 fix_size
= (u16
)(cmd
->len
+ sizeof(out_cmd
->hdr
));
633 dma_addr_t phys_addr
;
639 /* If any of the command structures end up being larger than
640 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
641 * we will need to increase the size of the TFD entries */
642 BUG_ON((fix_size
> TFD_MAX_PAYLOAD_SIZE
) &&
643 !(cmd
->meta
.flags
& CMD_SIZE_HUGE
));
645 if (iwl_queue_space(q
) < ((cmd
->meta
.flags
& CMD_ASYNC
) ? 2 : 1)) {
646 IWL_ERROR("No space for Tx\n");
650 spin_lock_irqsave(&priv
->hcmd_lock
, flags
);
652 tfd
= &txq
->bd
[q
->first_empty
];
653 memset(tfd
, 0, sizeof(*tfd
));
655 control_flags
= (u32
*) tfd
;
657 idx
= get_cmd_index(q
, q
->first_empty
, cmd
->meta
.flags
& CMD_SIZE_HUGE
);
658 out_cmd
= &txq
->cmd
[idx
];
660 out_cmd
->hdr
.cmd
= cmd
->id
;
661 memcpy(&out_cmd
->meta
, &cmd
->meta
, sizeof(cmd
->meta
));
662 memcpy(&out_cmd
->cmd
.payload
, cmd
->data
, cmd
->len
);
664 /* At this point, the out_cmd now has all of the incoming cmd
667 out_cmd
->hdr
.flags
= 0;
668 out_cmd
->hdr
.sequence
= cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM
) |
669 INDEX_TO_SEQ(q
->first_empty
));
670 if (out_cmd
->meta
.flags
& CMD_SIZE_HUGE
)
671 out_cmd
->hdr
.sequence
|= cpu_to_le16(SEQ_HUGE_FRAME
);
673 phys_addr
= txq
->dma_addr_cmd
+ sizeof(txq
->cmd
[0]) * idx
+
674 offsetof(struct iwl_cmd
, hdr
);
675 iwl_hw_txq_attach_buf_to_tfd(priv
, tfd
, phys_addr
, fix_size
);
677 pad
= U32_PAD(cmd
->len
);
678 count
= TFD_CTL_COUNT_GET(*control_flags
);
679 *control_flags
= TFD_CTL_COUNT_SET(count
) | TFD_CTL_PAD_SET(pad
);
681 IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
682 "%d bytes at %d[%d]:%d\n",
683 get_cmd_string(out_cmd
->hdr
.cmd
),
684 out_cmd
->hdr
.cmd
, le16_to_cpu(out_cmd
->hdr
.sequence
),
685 fix_size
, q
->first_empty
, idx
, IWL_CMD_QUEUE_NUM
);
687 txq
->need_update
= 1;
688 q
->first_empty
= iwl_queue_inc_wrap(q
->first_empty
, q
->n_bd
);
689 ret
= iwl_tx_queue_update_write_ptr(priv
, txq
);
691 spin_unlock_irqrestore(&priv
->hcmd_lock
, flags
);
692 return ret
? ret
: idx
;
695 int iwl_send_cmd_async(struct iwl_priv
*priv
, struct iwl_host_cmd
*cmd
)
699 BUG_ON(!(cmd
->meta
.flags
& CMD_ASYNC
));
701 /* An asynchronous command can not expect an SKB to be set. */
702 BUG_ON(cmd
->meta
.flags
& CMD_WANT_SKB
);
704 /* An asynchronous command MUST have a callback. */
705 BUG_ON(!cmd
->meta
.u
.callback
);
707 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
710 ret
= iwl_enqueue_hcmd(priv
, cmd
);
712 IWL_ERROR("Error sending %s: iwl_enqueue_hcmd failed: %d\n",
713 get_cmd_string(cmd
->id
), ret
);
719 int iwl_send_cmd_sync(struct iwl_priv
*priv
, struct iwl_host_cmd
*cmd
)
723 static atomic_t entry
= ATOMIC_INIT(0); /* reentrance protection */
725 BUG_ON(cmd
->meta
.flags
& CMD_ASYNC
);
727 /* A synchronous command can not have a callback set. */
728 BUG_ON(cmd
->meta
.u
.callback
!= NULL
);
730 if (atomic_xchg(&entry
, 1)) {
731 IWL_ERROR("Error sending %s: Already sending a host command\n",
732 get_cmd_string(cmd
->id
));
736 set_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
738 if (cmd
->meta
.flags
& CMD_WANT_SKB
)
739 cmd
->meta
.source
= &cmd
->meta
;
741 cmd_idx
= iwl_enqueue_hcmd(priv
, cmd
);
744 IWL_ERROR("Error sending %s: iwl_enqueue_hcmd failed: %d\n",
745 get_cmd_string(cmd
->id
), ret
);
749 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
750 !test_bit(STATUS_HCMD_ACTIVE
, &priv
->status
),
751 HOST_COMPLETE_TIMEOUT
);
753 if (test_bit(STATUS_HCMD_ACTIVE
, &priv
->status
)) {
754 IWL_ERROR("Error sending %s: time out after %dms.\n",
755 get_cmd_string(cmd
->id
),
756 jiffies_to_msecs(HOST_COMPLETE_TIMEOUT
));
758 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
764 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
)) {
765 IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n",
766 get_cmd_string(cmd
->id
));
770 if (test_bit(STATUS_FW_ERROR
, &priv
->status
)) {
771 IWL_DEBUG_INFO("Command %s failed: FW Error\n",
772 get_cmd_string(cmd
->id
));
776 if ((cmd
->meta
.flags
& CMD_WANT_SKB
) && !cmd
->meta
.u
.skb
) {
777 IWL_ERROR("Error: Response NULL in '%s'\n",
778 get_cmd_string(cmd
->id
));
787 if (cmd
->meta
.flags
& CMD_WANT_SKB
) {
788 struct iwl_cmd
*qcmd
;
790 /* Cancel the CMD_WANT_SKB flag for the cmd in the
791 * TX cmd queue. Otherwise in case the cmd comes
792 * in later, it will possibly set an invalid
793 * address (cmd->meta.source). */
794 qcmd
= &priv
->txq
[IWL_CMD_QUEUE_NUM
].cmd
[cmd_idx
];
795 qcmd
->meta
.flags
&= ~CMD_WANT_SKB
;
798 if (cmd
->meta
.u
.skb
) {
799 dev_kfree_skb_any(cmd
->meta
.u
.skb
);
800 cmd
->meta
.u
.skb
= NULL
;
803 atomic_set(&entry
, 0);
807 int iwl_send_cmd(struct iwl_priv
*priv
, struct iwl_host_cmd
*cmd
)
809 /* A command can not be asynchronous AND expect an SKB to be set. */
810 BUG_ON((cmd
->meta
.flags
& CMD_ASYNC
) &&
811 (cmd
->meta
.flags
& CMD_WANT_SKB
));
813 if (cmd
->meta
.flags
& CMD_ASYNC
)
814 return iwl_send_cmd_async(priv
, cmd
);
816 return iwl_send_cmd_sync(priv
, cmd
);
819 int iwl_send_cmd_pdu(struct iwl_priv
*priv
, u8 id
, u16 len
, const void *data
)
821 struct iwl_host_cmd cmd
= {
827 return iwl_send_cmd_sync(priv
, &cmd
);
830 static int __must_check
iwl_send_cmd_u32(struct iwl_priv
*priv
, u8 id
, u32 val
)
832 struct iwl_host_cmd cmd
= {
838 return iwl_send_cmd_sync(priv
, &cmd
);
841 int iwl_send_statistics_request(struct iwl_priv
*priv
)
843 return iwl_send_cmd_u32(priv
, REPLY_STATISTICS_CMD
, 0);
847 * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
848 * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
849 * @channel: Any channel valid for the requested phymode
851 * In addition to setting the staging RXON, priv->phymode is also set.
853 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
854 * in the staging RXON flag structure based on the phymode
856 static int iwl_set_rxon_channel(struct iwl_priv
*priv
, u8 phymode
, u16 channel
)
858 if (!iwl_get_channel_info(priv
, phymode
, channel
)) {
859 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
864 if ((le16_to_cpu(priv
->staging_rxon
.channel
) == channel
) &&
865 (priv
->phymode
== phymode
))
868 priv
->staging_rxon
.channel
= cpu_to_le16(channel
);
869 if (phymode
== MODE_IEEE80211A
)
870 priv
->staging_rxon
.flags
&= ~RXON_FLG_BAND_24G_MSK
;
872 priv
->staging_rxon
.flags
|= RXON_FLG_BAND_24G_MSK
;
874 priv
->phymode
= phymode
;
876 IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel
, phymode
);
882 * iwl_check_rxon_cmd - validate RXON structure is valid
884 * NOTE: This is really only useful during development and can eventually
885 * be #ifdef'd out once the driver is stable and folks aren't actively
888 static int iwl_check_rxon_cmd(struct iwl_rxon_cmd
*rxon
)
893 if (rxon
->flags
& RXON_FLG_BAND_24G_MSK
) {
894 error
|= le32_to_cpu(rxon
->flags
&
895 (RXON_FLG_TGJ_NARROW_BAND_MSK
|
896 RXON_FLG_RADAR_DETECT_MSK
));
898 IWL_WARNING("check 24G fields %d | %d\n",
901 error
|= (rxon
->flags
& RXON_FLG_SHORT_SLOT_MSK
) ?
902 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK
);
904 IWL_WARNING("check 52 fields %d | %d\n",
906 error
|= le32_to_cpu(rxon
->flags
& RXON_FLG_CCK_MSK
);
908 IWL_WARNING("check 52 CCK %d | %d\n",
911 error
|= (rxon
->node_addr
[0] | rxon
->bssid_addr
[0]) & 0x1;
913 IWL_WARNING("check mac addr %d | %d\n", counter
++, error
);
915 /* make sure basic rates 6Mbps and 1Mbps are supported */
916 error
|= (((rxon
->ofdm_basic_rates
& IWL_RATE_6M_MASK
) == 0) &&
917 ((rxon
->cck_basic_rates
& IWL_RATE_1M_MASK
) == 0));
919 IWL_WARNING("check basic rate %d | %d\n", counter
++, error
);
921 error
|= (le16_to_cpu(rxon
->assoc_id
) > 2007);
923 IWL_WARNING("check assoc id %d | %d\n", counter
++, error
);
925 error
|= ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
))
926 == (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
));
928 IWL_WARNING("check CCK and short slot %d | %d\n",
931 error
|= ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
))
932 == (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
));
934 IWL_WARNING("check CCK & auto detect %d | %d\n",
937 error
|= ((rxon
->flags
& (RXON_FLG_AUTO_DETECT_MSK
|
938 RXON_FLG_TGG_PROTECT_MSK
)) == RXON_FLG_TGG_PROTECT_MSK
);
940 IWL_WARNING("check TGG and auto detect %d | %d\n",
943 if ((rxon
->flags
& RXON_FLG_DIS_DIV_MSK
))
944 error
|= ((rxon
->flags
& (RXON_FLG_ANT_B_MSK
|
945 RXON_FLG_ANT_A_MSK
)) == 0);
947 IWL_WARNING("check antenna %d %d\n", counter
++, error
);
950 IWL_WARNING("Tuning to channel %d\n",
951 le16_to_cpu(rxon
->channel
));
954 IWL_ERROR("Not a valid iwl_rxon_assoc_cmd field values\n");
961 * iwl_full_rxon_required - determine if RXON_ASSOC can be used in RXON commit
962 * @priv: staging_rxon is comapred to active_rxon
964 * If the RXON structure is changing sufficient to require a new
965 * tune or to clear and reset the RXON_FILTER_ASSOC_MSK then return 1
966 * to indicate a new tune is required.
968 static int iwl_full_rxon_required(struct iwl_priv
*priv
)
971 /* These items are only settable from the full RXON command */
972 if (!(priv
->active_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
) ||
973 compare_ether_addr(priv
->staging_rxon
.bssid_addr
,
974 priv
->active_rxon
.bssid_addr
) ||
975 compare_ether_addr(priv
->staging_rxon
.node_addr
,
976 priv
->active_rxon
.node_addr
) ||
977 compare_ether_addr(priv
->staging_rxon
.wlap_bssid_addr
,
978 priv
->active_rxon
.wlap_bssid_addr
) ||
979 (priv
->staging_rxon
.dev_type
!= priv
->active_rxon
.dev_type
) ||
980 (priv
->staging_rxon
.channel
!= priv
->active_rxon
.channel
) ||
981 (priv
->staging_rxon
.air_propagation
!=
982 priv
->active_rxon
.air_propagation
) ||
983 (priv
->staging_rxon
.assoc_id
!= priv
->active_rxon
.assoc_id
))
986 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
987 * be updated with the RXON_ASSOC command -- however only some
988 * flag transitions are allowed using RXON_ASSOC */
990 /* Check if we are not switching bands */
991 if ((priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) !=
992 (priv
->active_rxon
.flags
& RXON_FLG_BAND_24G_MSK
))
995 /* Check if we are switching association toggle */
996 if ((priv
->staging_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
) !=
997 (priv
->active_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
))
1003 static int iwl_send_rxon_assoc(struct iwl_priv
*priv
)
1006 struct iwl_rx_packet
*res
= NULL
;
1007 struct iwl_rxon_assoc_cmd rxon_assoc
;
1008 struct iwl_host_cmd cmd
= {
1009 .id
= REPLY_RXON_ASSOC
,
1010 .len
= sizeof(rxon_assoc
),
1011 .meta
.flags
= CMD_WANT_SKB
,
1012 .data
= &rxon_assoc
,
1014 const struct iwl_rxon_cmd
*rxon1
= &priv
->staging_rxon
;
1015 const struct iwl_rxon_cmd
*rxon2
= &priv
->active_rxon
;
1017 if ((rxon1
->flags
== rxon2
->flags
) &&
1018 (rxon1
->filter_flags
== rxon2
->filter_flags
) &&
1019 (rxon1
->cck_basic_rates
== rxon2
->cck_basic_rates
) &&
1020 (rxon1
->ofdm_basic_rates
== rxon2
->ofdm_basic_rates
)) {
1021 IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
1025 rxon_assoc
.flags
= priv
->staging_rxon
.flags
;
1026 rxon_assoc
.filter_flags
= priv
->staging_rxon
.filter_flags
;
1027 rxon_assoc
.ofdm_basic_rates
= priv
->staging_rxon
.ofdm_basic_rates
;
1028 rxon_assoc
.cck_basic_rates
= priv
->staging_rxon
.cck_basic_rates
;
1029 rxon_assoc
.reserved
= 0;
1031 rc
= iwl_send_cmd_sync(priv
, &cmd
);
1035 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
1036 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
1037 IWL_ERROR("Bad return from REPLY_RXON_ASSOC command\n");
1041 priv
->alloc_rxb_skb
--;
1042 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
1048 * iwl_commit_rxon - commit staging_rxon to hardware
1050 * The RXON command in staging_rxon is commited to the hardware and
1051 * the active_rxon structure is updated with the new data. This
1052 * function correctly transitions out of the RXON_ASSOC_MSK state if
1053 * a HW tune is required based on the RXON structure changes.
1055 static int iwl_commit_rxon(struct iwl_priv
*priv
)
1057 /* cast away the const for active_rxon in this function */
1058 struct iwl_rxon_cmd
*active_rxon
= (void *)&priv
->active_rxon
;
1060 DECLARE_MAC_BUF(mac
);
1062 if (!iwl_is_alive(priv
))
1065 /* always get timestamp with Rx frame */
1066 priv
->staging_rxon
.flags
|= RXON_FLG_TSF2HOST_MSK
;
1068 /* select antenna */
1069 priv
->staging_rxon
.flags
&=
1070 ~(RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_SEL_MSK
);
1071 priv
->staging_rxon
.flags
|= iwl3945_get_antenna_flags(priv
);
1073 rc
= iwl_check_rxon_cmd(&priv
->staging_rxon
);
1075 IWL_ERROR("Invalid RXON configuration. Not committing.\n");
1079 /* If we don't need to send a full RXON, we can use
1080 * iwl_rxon_assoc_cmd which is used to reconfigure filter
1081 * and other flags for the current radio configuration. */
1082 if (!iwl_full_rxon_required(priv
)) {
1083 rc
= iwl_send_rxon_assoc(priv
);
1085 IWL_ERROR("Error setting RXON_ASSOC "
1086 "configuration (%d).\n", rc
);
1090 memcpy(active_rxon
, &priv
->staging_rxon
, sizeof(*active_rxon
));
1095 /* If we are currently associated and the new config requires
1096 * an RXON_ASSOC and the new config wants the associated mask enabled,
1097 * we must clear the associated from the active configuration
1098 * before we apply the new config */
1099 if (iwl_is_associated(priv
) &&
1100 (priv
->staging_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
)) {
1101 IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
1102 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
1104 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON
,
1105 sizeof(struct iwl_rxon_cmd
),
1106 &priv
->active_rxon
);
1108 /* If the mask clearing failed then we set
1109 * active_rxon back to what it was previously */
1111 active_rxon
->filter_flags
|= RXON_FILTER_ASSOC_MSK
;
1112 IWL_ERROR("Error clearing ASSOC_MSK on current "
1113 "configuration (%d).\n", rc
);
1118 IWL_DEBUG_INFO("Sending RXON\n"
1119 "* with%s RXON_FILTER_ASSOC_MSK\n"
1122 ((priv
->staging_rxon
.filter_flags
&
1123 RXON_FILTER_ASSOC_MSK
) ? "" : "out"),
1124 le16_to_cpu(priv
->staging_rxon
.channel
),
1125 print_mac(mac
, priv
->staging_rxon
.bssid_addr
));
1127 /* Apply the new configuration */
1128 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON
,
1129 sizeof(struct iwl_rxon_cmd
), &priv
->staging_rxon
);
1131 IWL_ERROR("Error setting new configuration (%d).\n", rc
);
1135 memcpy(active_rxon
, &priv
->staging_rxon
, sizeof(*active_rxon
));
1137 iwl_clear_stations_table(priv
);
1139 /* If we issue a new RXON command which required a tune then we must
1140 * send a new TXPOWER command or we won't be able to Tx any frames */
1141 rc
= iwl_hw_reg_send_txpower(priv
);
1143 IWL_ERROR("Error setting Tx power (%d).\n", rc
);
1147 /* Add the broadcast address so we can send broadcast frames */
1148 if (iwl_add_station(priv
, BROADCAST_ADDR
, 0, 0) ==
1149 IWL_INVALID_STATION
) {
1150 IWL_ERROR("Error adding BROADCAST address for transmit.\n");
1154 /* If we have set the ASSOC_MSK and we are in BSS mode then
1155 * add the IWL_AP_ID to the station rate table */
1156 if (iwl_is_associated(priv
) &&
1157 (priv
->iw_mode
== IEEE80211_IF_TYPE_STA
))
1158 if (iwl_add_station(priv
, priv
->active_rxon
.bssid_addr
, 1, 0)
1159 == IWL_INVALID_STATION
) {
1160 IWL_ERROR("Error adding AP address for transmit.\n");
1164 /* Init the hardware's rate fallback order based on the
1166 rc
= iwl3945_init_hw_rate_table(priv
);
1168 IWL_ERROR("Error setting HW rate table: %02X\n", rc
);
1175 static int iwl_send_bt_config(struct iwl_priv
*priv
)
1177 struct iwl_bt_cmd bt_cmd
= {
1185 return iwl_send_cmd_pdu(priv
, REPLY_BT_CONFIG
,
1186 sizeof(struct iwl_bt_cmd
), &bt_cmd
);
1189 static int iwl_send_scan_abort(struct iwl_priv
*priv
)
1192 struct iwl_rx_packet
*res
;
1193 struct iwl_host_cmd cmd
= {
1194 .id
= REPLY_SCAN_ABORT_CMD
,
1195 .meta
.flags
= CMD_WANT_SKB
,
1198 /* If there isn't a scan actively going on in the hardware
1199 * then we are in between scan bands and not actually
1200 * actively scanning, so don't send the abort command */
1201 if (!test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
1202 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
1206 rc
= iwl_send_cmd_sync(priv
, &cmd
);
1208 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
1212 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
1213 if (res
->u
.status
!= CAN_ABORT_STATUS
) {
1214 /* The scan abort will return 1 for success or
1215 * 2 for "failure". A failure condition can be
1216 * due to simply not being in an active scan which
1217 * can occur if we send the scan abort before we
1218 * the microcode has notified us that a scan is
1220 IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res
->u
.status
);
1221 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
1222 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
1225 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
1230 static int iwl_card_state_sync_callback(struct iwl_priv
*priv
,
1231 struct iwl_cmd
*cmd
,
1232 struct sk_buff
*skb
)
1240 * Use: Sets the internal card state to enable, disable, or halt
1242 * When in the 'enable' state the card operates as normal.
1243 * When in the 'disable' state, the card enters into a low power mode.
1244 * When in the 'halt' state, the card is shut down and must be fully
1245 * restarted to come back on.
1247 static int iwl_send_card_state(struct iwl_priv
*priv
, u32 flags
, u8 meta_flag
)
1249 struct iwl_host_cmd cmd
= {
1250 .id
= REPLY_CARD_STATE_CMD
,
1253 .meta
.flags
= meta_flag
,
1256 if (meta_flag
& CMD_ASYNC
)
1257 cmd
.meta
.u
.callback
= iwl_card_state_sync_callback
;
1259 return iwl_send_cmd(priv
, &cmd
);
1262 static int iwl_add_sta_sync_callback(struct iwl_priv
*priv
,
1263 struct iwl_cmd
*cmd
, struct sk_buff
*skb
)
1265 struct iwl_rx_packet
*res
= NULL
;
1268 IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n");
1272 res
= (struct iwl_rx_packet
*)skb
->data
;
1273 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
1274 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1279 switch (res
->u
.add_sta
.status
) {
1280 case ADD_STA_SUCCESS_MSK
:
1286 /* We didn't cache the SKB; let the caller free it */
1290 int iwl_send_add_station(struct iwl_priv
*priv
,
1291 struct iwl_addsta_cmd
*sta
, u8 flags
)
1293 struct iwl_rx_packet
*res
= NULL
;
1295 struct iwl_host_cmd cmd
= {
1296 .id
= REPLY_ADD_STA
,
1297 .len
= sizeof(struct iwl_addsta_cmd
),
1298 .meta
.flags
= flags
,
1302 if (flags
& CMD_ASYNC
)
1303 cmd
.meta
.u
.callback
= iwl_add_sta_sync_callback
;
1305 cmd
.meta
.flags
|= CMD_WANT_SKB
;
1307 rc
= iwl_send_cmd(priv
, &cmd
);
1309 if (rc
|| (flags
& CMD_ASYNC
))
1312 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
1313 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
1314 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1320 switch (res
->u
.add_sta
.status
) {
1321 case ADD_STA_SUCCESS_MSK
:
1322 IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n");
1326 IWL_WARNING("REPLY_ADD_STA failed\n");
1331 priv
->alloc_rxb_skb
--;
1332 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
1337 static int iwl_update_sta_key_info(struct iwl_priv
*priv
,
1338 struct ieee80211_key_conf
*keyconf
,
1341 unsigned long flags
;
1342 __le16 key_flags
= 0;
1344 switch (keyconf
->alg
) {
1346 key_flags
|= STA_KEY_FLG_CCMP
;
1347 key_flags
|= cpu_to_le16(
1348 keyconf
->keyidx
<< STA_KEY_FLG_KEYID_POS
);
1349 key_flags
&= ~STA_KEY_FLG_INVALID
;
1357 spin_lock_irqsave(&priv
->sta_lock
, flags
);
1358 priv
->stations
[sta_id
].keyinfo
.alg
= keyconf
->alg
;
1359 priv
->stations
[sta_id
].keyinfo
.keylen
= keyconf
->keylen
;
1360 memcpy(priv
->stations
[sta_id
].keyinfo
.key
, keyconf
->key
,
1363 memcpy(priv
->stations
[sta_id
].sta
.key
.key
, keyconf
->key
,
1365 priv
->stations
[sta_id
].sta
.key
.key_flags
= key_flags
;
1366 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
1367 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
1369 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
1371 IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
1372 iwl_send_add_station(priv
, &priv
->stations
[sta_id
].sta
, 0);
1376 static int iwl_clear_sta_key_info(struct iwl_priv
*priv
, u8 sta_id
)
1378 unsigned long flags
;
1380 spin_lock_irqsave(&priv
->sta_lock
, flags
);
1381 memset(&priv
->stations
[sta_id
].keyinfo
, 0, sizeof(struct iwl_hw_key
));
1382 memset(&priv
->stations
[sta_id
].sta
.key
, 0, sizeof(struct iwl_keyinfo
));
1383 priv
->stations
[sta_id
].sta
.key
.key_flags
= STA_KEY_FLG_NO_ENC
;
1384 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
1385 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
1386 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
1388 IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n");
1389 iwl_send_add_station(priv
, &priv
->stations
[sta_id
].sta
, 0);
1393 static void iwl_clear_free_frames(struct iwl_priv
*priv
)
1395 struct list_head
*element
;
1397 IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
1398 priv
->frames_count
);
1400 while (!list_empty(&priv
->free_frames
)) {
1401 element
= priv
->free_frames
.next
;
1403 kfree(list_entry(element
, struct iwl_frame
, list
));
1404 priv
->frames_count
--;
1407 if (priv
->frames_count
) {
1408 IWL_WARNING("%d frames still in use. Did we lose one?\n",
1409 priv
->frames_count
);
1410 priv
->frames_count
= 0;
1414 static struct iwl_frame
*iwl_get_free_frame(struct iwl_priv
*priv
)
1416 struct iwl_frame
*frame
;
1417 struct list_head
*element
;
1418 if (list_empty(&priv
->free_frames
)) {
1419 frame
= kzalloc(sizeof(*frame
), GFP_KERNEL
);
1421 IWL_ERROR("Could not allocate frame!\n");
1425 priv
->frames_count
++;
1429 element
= priv
->free_frames
.next
;
1431 return list_entry(element
, struct iwl_frame
, list
);
1434 static void iwl_free_frame(struct iwl_priv
*priv
, struct iwl_frame
*frame
)
1436 memset(frame
, 0, sizeof(*frame
));
1437 list_add(&frame
->list
, &priv
->free_frames
);
1440 unsigned int iwl_fill_beacon_frame(struct iwl_priv
*priv
,
1441 struct ieee80211_hdr
*hdr
,
1442 const u8
*dest
, int left
)
1445 if (!iwl_is_associated(priv
) || !priv
->ibss_beacon
||
1446 ((priv
->iw_mode
!= IEEE80211_IF_TYPE_IBSS
) &&
1447 (priv
->iw_mode
!= IEEE80211_IF_TYPE_AP
)))
1450 if (priv
->ibss_beacon
->len
> left
)
1453 memcpy(hdr
, priv
->ibss_beacon
->data
, priv
->ibss_beacon
->len
);
1455 return priv
->ibss_beacon
->len
;
1458 static int iwl_rate_index_from_plcp(int plcp
)
1462 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
1463 if (iwl_rates
[i
].plcp
== plcp
)
1468 static u8
iwl_rate_get_lowest_plcp(int rate_mask
)
1472 for (i
= IWL_RATE_1M_INDEX
; i
!= IWL_RATE_INVALID
;
1473 i
= iwl_rates
[i
].next_ieee
) {
1474 if (rate_mask
& (1 << i
))
1475 return iwl_rates
[i
].plcp
;
1478 return IWL_RATE_INVALID
;
1481 static int iwl_send_beacon_cmd(struct iwl_priv
*priv
)
1483 struct iwl_frame
*frame
;
1484 unsigned int frame_size
;
1488 frame
= iwl_get_free_frame(priv
);
1491 IWL_ERROR("Could not obtain free frame buffer for beacon "
1496 if (!(priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
)) {
1497 rate
= iwl_rate_get_lowest_plcp(priv
->active_rate_basic
&
1499 if (rate
== IWL_INVALID_RATE
)
1500 rate
= IWL_RATE_6M_PLCP
;
1502 rate
= iwl_rate_get_lowest_plcp(priv
->active_rate_basic
& 0xF);
1503 if (rate
== IWL_INVALID_RATE
)
1504 rate
= IWL_RATE_1M_PLCP
;
1507 frame_size
= iwl_hw_get_beacon_cmd(priv
, frame
, rate
);
1509 rc
= iwl_send_cmd_pdu(priv
, REPLY_TX_BEACON
, frame_size
,
1512 iwl_free_frame(priv
, frame
);
1517 /******************************************************************************
1519 * EEPROM related functions
1521 ******************************************************************************/
1523 static void get_eeprom_mac(struct iwl_priv
*priv
, u8
*mac
)
1525 memcpy(mac
, priv
->eeprom
.mac_address
, 6);
1529 * iwl_eeprom_init - read EEPROM contents
1531 * Load the EEPROM from adapter into priv->eeprom
1533 * NOTE: This routine uses the non-debug IO access functions.
1535 int iwl_eeprom_init(struct iwl_priv
*priv
)
1537 u16
*e
= (u16
*)&priv
->eeprom
;
1538 u32 gp
= iwl_read32(priv
, CSR_EEPROM_GP
);
1540 int sz
= sizeof(priv
->eeprom
);
1545 /* The EEPROM structure has several padding buffers within it
1546 * and when adding new EEPROM maps is subject to programmer errors
1547 * which may be very difficult to identify without explicitly
1548 * checking the resulting size of the eeprom map. */
1549 BUILD_BUG_ON(sizeof(priv
->eeprom
) != IWL_EEPROM_IMAGE_SIZE
);
1551 if ((gp
& CSR_EEPROM_GP_VALID_MSK
) == CSR_EEPROM_GP_BAD_SIGNATURE
) {
1552 IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp
);
1556 rc
= iwl_eeprom_aqcuire_semaphore(priv
);
1558 IWL_ERROR("Failed to aqcuire EEPROM semaphore.\n");
1562 /* eeprom is an array of 16bit values */
1563 for (addr
= 0; addr
< sz
; addr
+= sizeof(u16
)) {
1564 _iwl_write32(priv
, CSR_EEPROM_REG
, addr
<< 1);
1565 _iwl_clear_bit(priv
, CSR_EEPROM_REG
, CSR_EEPROM_REG_BIT_CMD
);
1567 for (i
= 0; i
< IWL_EEPROM_ACCESS_TIMEOUT
;
1568 i
+= IWL_EEPROM_ACCESS_DELAY
) {
1569 r
= _iwl_read_restricted(priv
, CSR_EEPROM_REG
);
1570 if (r
& CSR_EEPROM_REG_READ_VALID_MSK
)
1572 udelay(IWL_EEPROM_ACCESS_DELAY
);
1575 if (!(r
& CSR_EEPROM_REG_READ_VALID_MSK
)) {
1576 IWL_ERROR("Time out reading EEPROM[%d]", addr
);
1579 e
[addr
/ 2] = le16_to_cpu(r
>> 16);
1585 /******************************************************************************
1587 * Misc. internal state and helper functions
1589 ******************************************************************************/
1590 #ifdef CONFIG_IWLWIFI_DEBUG
1593 * iwl_report_frame - dump frame to syslog during debug sessions
1595 * hack this function to show different aspects of received frames,
1596 * including selective frame dumps.
1597 * group100 parameter selects whether to show 1 out of 100 good frames.
1599 * TODO: ieee80211_hdr stuff is common to 3945 and 4965, so frame type
1600 * info output is okay, but some of this stuff (e.g. iwl_rx_frame_stats)
1601 * is 3945-specific and gives bad output for 4965. Need to split the
1602 * functionality, keep common stuff here.
1604 void iwl_report_frame(struct iwl_priv
*priv
,
1605 struct iwl_rx_packet
*pkt
,
1606 struct ieee80211_hdr
*header
, int group100
)
1609 u32 print_summary
= 0;
1610 u32 print_dump
= 0; /* set to 1 to dump all frames' contents */
1627 struct iwl_rx_frame_stats
*rx_stats
= IWL_RX_STATS(pkt
);
1628 struct iwl_rx_frame_hdr
*rx_hdr
= IWL_RX_HDR(pkt
);
1629 struct iwl_rx_frame_end
*rx_end
= IWL_RX_END(pkt
);
1630 u8
*data
= IWL_RX_DATA(pkt
);
1633 fc
= le16_to_cpu(header
->frame_control
);
1634 seq_ctl
= le16_to_cpu(header
->seq_ctrl
);
1637 channel
= le16_to_cpu(rx_hdr
->channel
);
1638 phy_flags
= le16_to_cpu(rx_hdr
->phy_flags
);
1639 rate_sym
= rx_hdr
->rate
;
1640 length
= le16_to_cpu(rx_hdr
->len
);
1642 /* end-of-frame status and timestamp */
1643 status
= le32_to_cpu(rx_end
->status
);
1644 bcn_tmr
= le32_to_cpu(rx_end
->beacon_timestamp
);
1645 tsf_low
= le64_to_cpu(rx_end
->timestamp
) & 0x0ffffffff;
1646 tsf
= le64_to_cpu(rx_end
->timestamp
);
1648 /* signal statistics */
1649 rssi
= rx_stats
->rssi
;
1650 agc
= rx_stats
->agc
;
1651 sig_avg
= le16_to_cpu(rx_stats
->sig_avg
);
1652 noise_diff
= le16_to_cpu(rx_stats
->noise_diff
);
1654 to_us
= !compare_ether_addr(header
->addr1
, priv
->mac_addr
);
1656 /* if data frame is to us and all is good,
1657 * (optionally) print summary for only 1 out of every 100 */
1658 if (to_us
&& (fc
& ~IEEE80211_FCTL_PROTECTED
) ==
1659 (IEEE80211_FCTL_FROMDS
| IEEE80211_FTYPE_DATA
)) {
1662 print_summary
= 1; /* print each frame */
1663 else if (priv
->framecnt_to_us
< 100) {
1664 priv
->framecnt_to_us
++;
1667 priv
->framecnt_to_us
= 0;
1672 /* print summary for all other frames */
1676 if (print_summary
) {
1681 title
= "100Frames";
1682 else if (fc
& IEEE80211_FCTL_RETRY
)
1684 else if (ieee80211_is_assoc_response(fc
))
1686 else if (ieee80211_is_reassoc_response(fc
))
1688 else if (ieee80211_is_probe_response(fc
)) {
1690 print_dump
= 1; /* dump frame contents */
1691 } else if (ieee80211_is_beacon(fc
)) {
1693 print_dump
= 1; /* dump frame contents */
1694 } else if (ieee80211_is_atim(fc
))
1696 else if (ieee80211_is_auth(fc
))
1698 else if (ieee80211_is_deauth(fc
))
1700 else if (ieee80211_is_disassoc(fc
))
1705 rate
= iwl_rate_index_from_plcp(rate_sym
);
1709 rate
= iwl_rates
[rate
].ieee
/ 2;
1711 /* print frame summary.
1712 * MAC addresses show just the last byte (for brevity),
1713 * but you can hack it to show more, if you'd like to. */
1715 IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
1716 "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
1717 title
, fc
, header
->addr1
[5],
1718 length
, rssi
, channel
, rate
);
1720 /* src/dst addresses assume managed mode */
1721 IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
1722 "src=0x%02x, rssi=%u, tim=%lu usec, "
1723 "phy=0x%02x, chnl=%d\n",
1724 title
, fc
, header
->addr1
[5],
1725 header
->addr3
[5], rssi
,
1726 tsf_low
- priv
->scan_start_tsf
,
1727 phy_flags
, channel
);
1731 iwl_print_hex_dump(IWL_DL_RX
, data
, length
);
1735 static void iwl_unset_hw_setting(struct iwl_priv
*priv
)
1737 if (priv
->hw_setting
.shared_virt
)
1738 pci_free_consistent(priv
->pci_dev
,
1739 sizeof(struct iwl_shared
),
1740 priv
->hw_setting
.shared_virt
,
1741 priv
->hw_setting
.shared_phys
);
1745 * iwl_supported_rate_to_ie - fill in the supported rate in IE field
1747 * return : set the bit for each supported rate insert in ie
1749 static u16
iwl_supported_rate_to_ie(u8
*ie
, u16 supported_rate
,
1750 u16 basic_rate
, int *left
)
1752 u16 ret_rates
= 0, bit
;
1757 for (bit
= 1, i
= 0; i
< IWL_RATE_COUNT
; i
++, bit
<<= 1) {
1758 if (bit
& supported_rate
) {
1760 rates
[*cnt
] = iwl_rates
[i
].ieee
|
1761 ((bit
& basic_rate
) ? 0x80 : 0x00);
1765 (*cnt
>= IWL_SUPPORTED_RATES_IE_LEN
))
1774 * iwl_fill_probe_req - fill in all required fields and IE for probe request
1776 static u16
iwl_fill_probe_req(struct iwl_priv
*priv
,
1777 struct ieee80211_mgmt
*frame
,
1778 int left
, int is_direct
)
1782 u16 active_rates
, ret_rates
, cck_rates
;
1784 /* Make sure there is enough space for the probe request,
1785 * two mandatory IEs and the data */
1791 frame
->frame_control
= cpu_to_le16(IEEE80211_STYPE_PROBE_REQ
);
1792 memcpy(frame
->da
, BROADCAST_ADDR
, ETH_ALEN
);
1793 memcpy(frame
->sa
, priv
->mac_addr
, ETH_ALEN
);
1794 memcpy(frame
->bssid
, BROADCAST_ADDR
, ETH_ALEN
);
1795 frame
->seq_ctrl
= 0;
1797 /* fill in our indirect SSID IE */
1804 pos
= &(frame
->u
.probe_req
.variable
[0]);
1805 *pos
++ = WLAN_EID_SSID
;
1808 /* fill in our direct SSID IE... */
1811 left
-= 2 + priv
->essid_len
;
1814 /* ... fill it in... */
1815 *pos
++ = WLAN_EID_SSID
;
1816 *pos
++ = priv
->essid_len
;
1817 memcpy(pos
, priv
->essid
, priv
->essid_len
);
1818 pos
+= priv
->essid_len
;
1819 len
+= 2 + priv
->essid_len
;
1822 /* fill in supported rate */
1828 /* ... fill it in... */
1829 *pos
++ = WLAN_EID_SUPP_RATES
;
1832 priv
->active_rate
= priv
->rates_mask
;
1833 active_rates
= priv
->active_rate
;
1834 priv
->active_rate_basic
= priv
->rates_mask
& IWL_BASIC_RATES_MASK
;
1836 cck_rates
= IWL_CCK_RATES_MASK
& active_rates
;
1837 ret_rates
= iwl_supported_rate_to_ie(pos
, cck_rates
,
1838 priv
->active_rate_basic
, &left
);
1839 active_rates
&= ~ret_rates
;
1841 ret_rates
= iwl_supported_rate_to_ie(pos
, active_rates
,
1842 priv
->active_rate_basic
, &left
);
1843 active_rates
&= ~ret_rates
;
1847 if (active_rates
== 0)
1850 /* fill in supported extended rate */
1855 /* ... fill it in... */
1856 *pos
++ = WLAN_EID_EXT_SUPP_RATES
;
1858 iwl_supported_rate_to_ie(pos
, active_rates
,
1859 priv
->active_rate_basic
, &left
);
1870 #ifdef CONFIG_IWLWIFI_QOS
1871 static int iwl_send_qos_params_command(struct iwl_priv
*priv
,
1872 struct iwl_qosparam_cmd
*qos
)
1875 return iwl_send_cmd_pdu(priv
, REPLY_QOS_PARAM
,
1876 sizeof(struct iwl_qosparam_cmd
), qos
);
1879 static void iwl_reset_qos(struct iwl_priv
*priv
)
1885 unsigned long flags
;
1888 spin_lock_irqsave(&priv
->lock
, flags
);
1889 priv
->qos_data
.qos_active
= 0;
1891 if (priv
->iw_mode
== IEEE80211_IF_TYPE_IBSS
) {
1892 if (priv
->qos_data
.qos_enable
)
1893 priv
->qos_data
.qos_active
= 1;
1894 if (!(priv
->active_rate
& 0xfff0)) {
1898 } else if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) {
1899 if (priv
->qos_data
.qos_enable
)
1900 priv
->qos_data
.qos_active
= 1;
1901 } else if (!(priv
->staging_rxon
.flags
& RXON_FLG_SHORT_SLOT_MSK
)) {
1906 if (priv
->qos_data
.qos_active
)
1909 priv
->qos_data
.def_qos_parm
.ac
[0].cw_min
= cpu_to_le16(cw_min
);
1910 priv
->qos_data
.def_qos_parm
.ac
[0].cw_max
= cpu_to_le16(cw_max
);
1911 priv
->qos_data
.def_qos_parm
.ac
[0].aifsn
= aifs
;
1912 priv
->qos_data
.def_qos_parm
.ac
[0].edca_txop
= 0;
1913 priv
->qos_data
.def_qos_parm
.ac
[0].reserved1
= 0;
1915 if (priv
->qos_data
.qos_active
) {
1917 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
= cpu_to_le16(cw_min
);
1918 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
= cpu_to_le16(cw_max
);
1919 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 7;
1920 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
= 0;
1921 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1924 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
1925 cpu_to_le16((cw_min
+ 1) / 2 - 1);
1926 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
1927 cpu_to_le16(cw_max
);
1928 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 2;
1930 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1933 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1935 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1938 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
1939 cpu_to_le16((cw_min
+ 1) / 4 - 1);
1940 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
1941 cpu_to_le16((cw_max
+ 1) / 2 - 1);
1942 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 2;
1943 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1945 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1948 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1951 for (i
= 1; i
< 4; i
++) {
1952 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
1953 cpu_to_le16(cw_min
);
1954 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
1955 cpu_to_le16(cw_max
);
1956 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= aifs
;
1957 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
= 0;
1958 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1961 IWL_DEBUG_QOS("set QoS to default \n");
1963 spin_unlock_irqrestore(&priv
->lock
, flags
);
1966 static void iwl_activate_qos(struct iwl_priv
*priv
, u8 force
)
1968 unsigned long flags
;
1973 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
1976 if (!priv
->qos_data
.qos_enable
)
1979 spin_lock_irqsave(&priv
->lock
, flags
);
1980 priv
->qos_data
.def_qos_parm
.qos_flags
= 0;
1982 if (priv
->qos_data
.qos_cap
.q_AP
.queue_request
&&
1983 !priv
->qos_data
.qos_cap
.q_AP
.txop_request
)
1984 priv
->qos_data
.def_qos_parm
.qos_flags
|=
1985 QOS_PARAM_FLG_TXOP_TYPE_MSK
;
1987 if (priv
->qos_data
.qos_active
)
1988 priv
->qos_data
.def_qos_parm
.qos_flags
|=
1989 QOS_PARAM_FLG_UPDATE_EDCA_MSK
;
1991 spin_unlock_irqrestore(&priv
->lock
, flags
);
1993 if (force
|| iwl_is_associated(priv
)) {
1994 IWL_DEBUG_QOS("send QoS cmd with Qos active %d \n",
1995 priv
->qos_data
.qos_active
);
1997 iwl_send_qos_params_command(priv
,
1998 &(priv
->qos_data
.def_qos_parm
));
2002 #endif /* CONFIG_IWLWIFI_QOS */
2004 * Power management (not Tx power!) functions
2006 #define MSEC_TO_USEC 1024
2008 #define NOSLP __constant_cpu_to_le32(0)
2009 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK
2010 #define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
2011 #define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
2012 __constant_cpu_to_le32(X1), \
2013 __constant_cpu_to_le32(X2), \
2014 __constant_cpu_to_le32(X3), \
2015 __constant_cpu_to_le32(X4)}
2018 /* default power management (not Tx power) table values */
2020 static struct iwl_power_vec_entry range_0
[IWL_POWER_AC
] = {
2021 {{NOSLP
, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
2022 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
2023 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0},
2024 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0},
2025 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1},
2026 {{SLP
, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
2030 static struct iwl_power_vec_entry range_1
[IWL_POWER_AC
] = {
2031 {{NOSLP
, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
2032 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(500),
2033 SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
2034 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(300),
2035 SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
2036 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(100),
2037 SLP_VEC(2, 6, 9, 9, 0xFF)}, 0},
2038 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
2039 {{SLP
, SLP_TIMEOUT(25), SLP_TIMEOUT(25),
2040 SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
2043 int iwl_power_init_handle(struct iwl_priv
*priv
)
2046 struct iwl_power_mgr
*pow_data
;
2047 int size
= sizeof(struct iwl_power_vec_entry
) * IWL_POWER_AC
;
2050 IWL_DEBUG_POWER("Initialize power \n");
2052 pow_data
= &(priv
->power_data
);
2054 memset(pow_data
, 0, sizeof(*pow_data
));
2056 pow_data
->active_index
= IWL_POWER_RANGE_0
;
2057 pow_data
->dtim_val
= 0xffff;
2059 memcpy(&pow_data
->pwr_range_0
[0], &range_0
[0], size
);
2060 memcpy(&pow_data
->pwr_range_1
[0], &range_1
[0], size
);
2062 rc
= pci_read_config_word(priv
->pci_dev
, PCI_LINK_CTRL
, &pci_pm
);
2066 struct iwl_powertable_cmd
*cmd
;
2068 IWL_DEBUG_POWER("adjust power command flags\n");
2070 for (i
= 0; i
< IWL_POWER_AC
; i
++) {
2071 cmd
= &pow_data
->pwr_range_0
[i
].cmd
;
2074 cmd
->flags
&= ~IWL_POWER_PCI_PM_MSK
;
2076 cmd
->flags
|= IWL_POWER_PCI_PM_MSK
;
2082 static int iwl_update_power_cmd(struct iwl_priv
*priv
,
2083 struct iwl_powertable_cmd
*cmd
, u32 mode
)
2088 struct iwl_power_vec_entry
*range
;
2090 struct iwl_power_mgr
*pow_data
;
2092 if (mode
> IWL_POWER_INDEX_5
) {
2093 IWL_DEBUG_POWER("Error invalid power mode \n");
2096 pow_data
= &(priv
->power_data
);
2098 if (pow_data
->active_index
== IWL_POWER_RANGE_0
)
2099 range
= &pow_data
->pwr_range_0
[0];
2101 range
= &pow_data
->pwr_range_1
[1];
2103 memcpy(cmd
, &range
[mode
].cmd
, sizeof(struct iwl_powertable_cmd
));
2105 #ifdef IWL_MAC80211_DISABLE
2106 if (priv
->assoc_network
!= NULL
) {
2107 unsigned long flags
;
2109 period
= priv
->assoc_network
->tim
.tim_period
;
2111 #endif /*IWL_MAC80211_DISABLE */
2112 skip
= range
[mode
].no_dtim
;
2121 cmd
->flags
&= ~IWL_POWER_SLEEP_OVER_DTIM_MSK
;
2123 __le32 slp_itrvl
= cmd
->sleep_interval
[IWL_POWER_VEC_SIZE
- 1];
2124 max_sleep
= (le32_to_cpu(slp_itrvl
) / period
) * period
;
2125 cmd
->flags
|= IWL_POWER_SLEEP_OVER_DTIM_MSK
;
2128 for (i
= 0; i
< IWL_POWER_VEC_SIZE
; i
++) {
2129 if (le32_to_cpu(cmd
->sleep_interval
[i
]) > max_sleep
)
2130 cmd
->sleep_interval
[i
] = cpu_to_le32(max_sleep
);
2133 IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd
->flags
);
2134 IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd
->tx_data_timeout
));
2135 IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd
->rx_data_timeout
));
2136 IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
2137 le32_to_cpu(cmd
->sleep_interval
[0]),
2138 le32_to_cpu(cmd
->sleep_interval
[1]),
2139 le32_to_cpu(cmd
->sleep_interval
[2]),
2140 le32_to_cpu(cmd
->sleep_interval
[3]),
2141 le32_to_cpu(cmd
->sleep_interval
[4]));
2146 static int iwl_send_power_mode(struct iwl_priv
*priv
, u32 mode
)
2148 u32 final_mode
= mode
;
2150 struct iwl_powertable_cmd cmd
;
2152 /* If on battery, set to 3,
2153 * if plugged into AC power, set to CAM ("continuosly aware mode"),
2154 * else user level */
2156 case IWL_POWER_BATTERY
:
2157 final_mode
= IWL_POWER_INDEX_3
;
2160 final_mode
= IWL_POWER_MODE_CAM
;
2167 iwl_update_power_cmd(priv
, &cmd
, final_mode
);
2169 rc
= iwl_send_cmd_pdu(priv
, POWER_TABLE_CMD
, sizeof(cmd
), &cmd
);
2171 if (final_mode
== IWL_POWER_MODE_CAM
)
2172 clear_bit(STATUS_POWER_PMI
, &priv
->status
);
2174 set_bit(STATUS_POWER_PMI
, &priv
->status
);
2179 int iwl_is_network_packet(struct iwl_priv
*priv
, struct ieee80211_hdr
*header
)
2181 /* Filter incoming packets to determine if they are targeted toward
2182 * this network, discarding packets coming from ourselves */
2183 switch (priv
->iw_mode
) {
2184 case IEEE80211_IF_TYPE_IBSS
: /* Header: Dest. | Source | BSSID */
2185 /* packets from our adapter are dropped (echo) */
2186 if (!compare_ether_addr(header
->addr2
, priv
->mac_addr
))
2188 /* {broad,multi}cast packets to our IBSS go through */
2189 if (is_multicast_ether_addr(header
->addr1
))
2190 return !compare_ether_addr(header
->addr3
, priv
->bssid
);
2191 /* packets to our adapter go through */
2192 return !compare_ether_addr(header
->addr1
, priv
->mac_addr
);
2193 case IEEE80211_IF_TYPE_STA
: /* Header: Dest. | AP{BSSID} | Source */
2194 /* packets from our adapter are dropped (echo) */
2195 if (!compare_ether_addr(header
->addr3
, priv
->mac_addr
))
2197 /* {broad,multi}cast packets to our BSS go through */
2198 if (is_multicast_ether_addr(header
->addr1
))
2199 return !compare_ether_addr(header
->addr2
, priv
->bssid
);
2200 /* packets to our adapter go through */
2201 return !compare_ether_addr(header
->addr1
, priv
->mac_addr
);
2207 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
2209 const char *iwl_get_tx_fail_reason(u32 status
)
2211 switch (status
& TX_STATUS_MSK
) {
2212 case TX_STATUS_SUCCESS
:
2214 TX_STATUS_ENTRY(SHORT_LIMIT
);
2215 TX_STATUS_ENTRY(LONG_LIMIT
);
2216 TX_STATUS_ENTRY(FIFO_UNDERRUN
);
2217 TX_STATUS_ENTRY(MGMNT_ABORT
);
2218 TX_STATUS_ENTRY(NEXT_FRAG
);
2219 TX_STATUS_ENTRY(LIFE_EXPIRE
);
2220 TX_STATUS_ENTRY(DEST_PS
);
2221 TX_STATUS_ENTRY(ABORTED
);
2222 TX_STATUS_ENTRY(BT_RETRY
);
2223 TX_STATUS_ENTRY(STA_INVALID
);
2224 TX_STATUS_ENTRY(FRAG_DROPPED
);
2225 TX_STATUS_ENTRY(TID_DISABLE
);
2226 TX_STATUS_ENTRY(FRAME_FLUSHED
);
2227 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL
);
2228 TX_STATUS_ENTRY(TX_LOCKED
);
2229 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR
);
2236 * iwl_scan_cancel - Cancel any currently executing HW scan
2238 * NOTE: priv->mutex is not required before calling this function
2240 static int iwl_scan_cancel(struct iwl_priv
*priv
)
2242 if (!test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
2243 clear_bit(STATUS_SCANNING
, &priv
->status
);
2247 if (test_bit(STATUS_SCANNING
, &priv
->status
)) {
2248 if (!test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
2249 IWL_DEBUG_SCAN("Queuing scan abort.\n");
2250 set_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
2251 queue_work(priv
->workqueue
, &priv
->abort_scan
);
2254 IWL_DEBUG_SCAN("Scan abort already in progress.\n");
2256 return test_bit(STATUS_SCANNING
, &priv
->status
);
2263 * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
2264 * @ms: amount of time to wait (in milliseconds) for scan to abort
2266 * NOTE: priv->mutex must be held before calling this function
2268 static int iwl_scan_cancel_timeout(struct iwl_priv
*priv
, unsigned long ms
)
2270 unsigned long now
= jiffies
;
2273 ret
= iwl_scan_cancel(priv
);
2275 mutex_unlock(&priv
->mutex
);
2276 while (!time_after(jiffies
, now
+ msecs_to_jiffies(ms
)) &&
2277 test_bit(STATUS_SCANNING
, &priv
->status
))
2279 mutex_lock(&priv
->mutex
);
2281 return test_bit(STATUS_SCANNING
, &priv
->status
);
2287 static void iwl_sequence_reset(struct iwl_priv
*priv
)
2289 /* Reset ieee stats */
2291 /* We don't reset the net_device_stats (ieee->stats) on
2294 priv
->last_seq_num
= -1;
2295 priv
->last_frag_num
= -1;
2296 priv
->last_packet_time
= 0;
2298 iwl_scan_cancel(priv
);
2301 #define MAX_UCODE_BEACON_INTERVAL 1024
2302 #define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA)
2304 static __le16
iwl_adjust_beacon_interval(u16 beacon_val
)
2307 u16 beacon_factor
= 0;
2310 (beacon_val
+ MAX_UCODE_BEACON_INTERVAL
)
2311 / MAX_UCODE_BEACON_INTERVAL
;
2312 new_val
= beacon_val
/ beacon_factor
;
2314 return cpu_to_le16(new_val
);
2317 static void iwl_setup_rxon_timing(struct iwl_priv
*priv
)
2319 u64 interval_tm_unit
;
2321 unsigned long flags
;
2322 struct ieee80211_conf
*conf
= NULL
;
2325 conf
= ieee80211_get_hw_conf(priv
->hw
);
2327 spin_lock_irqsave(&priv
->lock
, flags
);
2328 priv
->rxon_timing
.timestamp
.dw
[1] = cpu_to_le32(priv
->timestamp1
);
2329 priv
->rxon_timing
.timestamp
.dw
[0] = cpu_to_le32(priv
->timestamp0
);
2331 priv
->rxon_timing
.listen_interval
= INTEL_CONN_LISTEN_INTERVAL
;
2333 tsf
= priv
->timestamp1
;
2334 tsf
= ((tsf
<< 32) | priv
->timestamp0
);
2336 beacon_int
= priv
->beacon_int
;
2337 spin_unlock_irqrestore(&priv
->lock
, flags
);
2339 if (priv
->iw_mode
== IEEE80211_IF_TYPE_STA
) {
2340 if (beacon_int
== 0) {
2341 priv
->rxon_timing
.beacon_interval
= cpu_to_le16(100);
2342 priv
->rxon_timing
.beacon_init_val
= cpu_to_le32(102400);
2344 priv
->rxon_timing
.beacon_interval
=
2345 cpu_to_le16(beacon_int
);
2346 priv
->rxon_timing
.beacon_interval
=
2347 iwl_adjust_beacon_interval(
2348 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
2351 priv
->rxon_timing
.atim_window
= 0;
2353 priv
->rxon_timing
.beacon_interval
=
2354 iwl_adjust_beacon_interval(conf
->beacon_int
);
2355 /* TODO: we need to get atim_window from upper stack
2356 * for now we set to 0 */
2357 priv
->rxon_timing
.atim_window
= 0;
2361 (le16_to_cpu(priv
->rxon_timing
.beacon_interval
) * 1024);
2362 result
= do_div(tsf
, interval_tm_unit
);
2363 priv
->rxon_timing
.beacon_init_val
=
2364 cpu_to_le32((u32
) ((u64
) interval_tm_unit
- result
));
2367 ("beacon interval %d beacon timer %d beacon tim %d\n",
2368 le16_to_cpu(priv
->rxon_timing
.beacon_interval
),
2369 le32_to_cpu(priv
->rxon_timing
.beacon_init_val
),
2370 le16_to_cpu(priv
->rxon_timing
.atim_window
));
2373 static int iwl_scan_initiate(struct iwl_priv
*priv
)
2375 if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) {
2376 IWL_ERROR("APs don't scan.\n");
2380 if (!iwl_is_ready_rf(priv
)) {
2381 IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
2385 if (test_bit(STATUS_SCANNING
, &priv
->status
)) {
2386 IWL_DEBUG_SCAN("Scan already in progress.\n");
2390 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
2391 IWL_DEBUG_SCAN("Scan request while abort pending. "
2396 IWL_DEBUG_INFO("Starting scan...\n");
2397 priv
->scan_bands
= 2;
2398 set_bit(STATUS_SCANNING
, &priv
->status
);
2399 priv
->scan_start
= jiffies
;
2400 priv
->scan_pass_start
= priv
->scan_start
;
2402 queue_work(priv
->workqueue
, &priv
->request_scan
);
2407 static int iwl_set_rxon_hwcrypto(struct iwl_priv
*priv
, int hw_decrypt
)
2409 struct iwl_rxon_cmd
*rxon
= &priv
->staging_rxon
;
2412 rxon
->filter_flags
&= ~RXON_FILTER_DIS_DECRYPT_MSK
;
2414 rxon
->filter_flags
|= RXON_FILTER_DIS_DECRYPT_MSK
;
2419 static void iwl_set_flags_for_phymode(struct iwl_priv
*priv
, u8 phymode
)
2421 if (phymode
== MODE_IEEE80211A
) {
2422 priv
->staging_rxon
.flags
&=
2423 ~(RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
2424 | RXON_FLG_CCK_MSK
);
2425 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
2427 /* Copied from iwl_bg_post_associate() */
2428 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_SLOT_TIME
)
2429 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
2431 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
2433 if (priv
->iw_mode
== IEEE80211_IF_TYPE_IBSS
)
2434 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
2436 priv
->staging_rxon
.flags
|= RXON_FLG_BAND_24G_MSK
;
2437 priv
->staging_rxon
.flags
|= RXON_FLG_AUTO_DETECT_MSK
;
2438 priv
->staging_rxon
.flags
&= ~RXON_FLG_CCK_MSK
;
2443 * initilize rxon structure with default values fromm eeprom
2445 static void iwl_connection_init_rx_config(struct iwl_priv
*priv
)
2447 const struct iwl_channel_info
*ch_info
;
2449 memset(&priv
->staging_rxon
, 0, sizeof(priv
->staging_rxon
));
2451 switch (priv
->iw_mode
) {
2452 case IEEE80211_IF_TYPE_AP
:
2453 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_AP
;
2456 case IEEE80211_IF_TYPE_STA
:
2457 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_ESS
;
2458 priv
->staging_rxon
.filter_flags
= RXON_FILTER_ACCEPT_GRP_MSK
;
2461 case IEEE80211_IF_TYPE_IBSS
:
2462 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_IBSS
;
2463 priv
->staging_rxon
.flags
= RXON_FLG_SHORT_PREAMBLE_MSK
;
2464 priv
->staging_rxon
.filter_flags
= RXON_FILTER_BCON_AWARE_MSK
|
2465 RXON_FILTER_ACCEPT_GRP_MSK
;
2468 case IEEE80211_IF_TYPE_MNTR
:
2469 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_SNIFFER
;
2470 priv
->staging_rxon
.filter_flags
= RXON_FILTER_PROMISC_MSK
|
2471 RXON_FILTER_CTL2HOST_MSK
| RXON_FILTER_ACCEPT_GRP_MSK
;
2476 /* TODO: Figure out when short_preamble would be set and cache from
2478 if (!hw_to_local(priv
->hw
)->short_preamble
)
2479 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
2481 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
2484 ch_info
= iwl_get_channel_info(priv
, priv
->phymode
,
2485 le16_to_cpu(priv
->staging_rxon
.channel
));
2488 ch_info
= &priv
->channel_info
[0];
2491 * in some case A channels are all non IBSS
2492 * in this case force B/G channel
2494 if ((priv
->iw_mode
== IEEE80211_IF_TYPE_IBSS
) &&
2495 !(is_channel_ibss(ch_info
)))
2496 ch_info
= &priv
->channel_info
[0];
2498 priv
->staging_rxon
.channel
= cpu_to_le16(ch_info
->channel
);
2499 if (is_channel_a_band(ch_info
))
2500 priv
->phymode
= MODE_IEEE80211A
;
2502 priv
->phymode
= MODE_IEEE80211G
;
2504 iwl_set_flags_for_phymode(priv
, priv
->phymode
);
2506 priv
->staging_rxon
.ofdm_basic_rates
=
2507 (IWL_OFDM_RATES_MASK
>> IWL_FIRST_OFDM_RATE
) & 0xFF;
2508 priv
->staging_rxon
.cck_basic_rates
=
2509 (IWL_CCK_RATES_MASK
>> IWL_FIRST_CCK_RATE
) & 0xF;
2512 static int iwl_set_mode(struct iwl_priv
*priv
, int mode
)
2514 if (!iwl_is_ready_rf(priv
))
2517 if (mode
== IEEE80211_IF_TYPE_IBSS
) {
2518 const struct iwl_channel_info
*ch_info
;
2520 ch_info
= iwl_get_channel_info(priv
,
2522 le16_to_cpu(priv
->staging_rxon
.channel
));
2524 if (!ch_info
|| !is_channel_ibss(ch_info
)) {
2525 IWL_ERROR("channel %d not IBSS channel\n",
2526 le16_to_cpu(priv
->staging_rxon
.channel
));
2531 cancel_delayed_work(&priv
->scan_check
);
2532 if (iwl_scan_cancel_timeout(priv
, 100)) {
2533 IWL_WARNING("Aborted scan still in progress after 100ms\n");
2534 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
2538 priv
->iw_mode
= mode
;
2540 iwl_connection_init_rx_config(priv
);
2541 memcpy(priv
->staging_rxon
.node_addr
, priv
->mac_addr
, ETH_ALEN
);
2543 iwl_clear_stations_table(priv
);
2545 iwl_commit_rxon(priv
);
2550 static void iwl_build_tx_cmd_hwcrypto(struct iwl_priv
*priv
,
2551 struct ieee80211_tx_control
*ctl
,
2552 struct iwl_cmd
*cmd
,
2553 struct sk_buff
*skb_frag
,
2556 struct iwl_hw_key
*keyinfo
= &priv
->stations
[ctl
->key_idx
].keyinfo
;
2558 switch (keyinfo
->alg
) {
2560 cmd
->cmd
.tx
.sec_ctl
= TX_CMD_SEC_CCM
;
2561 memcpy(cmd
->cmd
.tx
.key
, keyinfo
->key
, keyinfo
->keylen
);
2562 IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
2567 cmd
->cmd
.tx
.sec_ctl
= TX_CMD_SEC_TKIP
;
2570 memcpy(cmd
->cmd
.tx
.tkip_mic
.byte
, skb_frag
->tail
- 8,
2573 memset(cmd
->cmd
.tx
.tkip_mic
.byte
, 0, 8);
2578 cmd
->cmd
.tx
.sec_ctl
= TX_CMD_SEC_WEP
|
2579 (ctl
->key_idx
& TX_CMD_SEC_MSK
) << TX_CMD_SEC_SHIFT
;
2581 if (keyinfo
->keylen
== 13)
2582 cmd
->cmd
.tx
.sec_ctl
|= TX_CMD_SEC_KEY128
;
2584 memcpy(&cmd
->cmd
.tx
.key
[3], keyinfo
->key
, keyinfo
->keylen
);
2586 IWL_DEBUG_TX("Configuring packet for WEP encryption "
2587 "with key %d\n", ctl
->key_idx
);
2591 printk(KERN_ERR
"Unknown encode alg %d\n", keyinfo
->alg
);
2597 * handle build REPLY_TX command notification.
2599 static void iwl_build_tx_cmd_basic(struct iwl_priv
*priv
,
2600 struct iwl_cmd
*cmd
,
2601 struct ieee80211_tx_control
*ctrl
,
2602 struct ieee80211_hdr
*hdr
,
2603 int is_unicast
, u8 std_id
)
2606 u16 fc
= le16_to_cpu(hdr
->frame_control
);
2607 __le32 tx_flags
= cmd
->cmd
.tx
.tx_flags
;
2609 cmd
->cmd
.tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
2610 if (!(ctrl
->flags
& IEEE80211_TXCTL_NO_ACK
)) {
2611 tx_flags
|= TX_CMD_FLG_ACK_MSK
;
2612 if ((fc
& IEEE80211_FCTL_FTYPE
) == IEEE80211_FTYPE_MGMT
)
2613 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
2614 if (ieee80211_is_probe_response(fc
) &&
2615 !(le16_to_cpu(hdr
->seq_ctrl
) & 0xf))
2616 tx_flags
|= TX_CMD_FLG_TSF_MSK
;
2618 tx_flags
&= (~TX_CMD_FLG_ACK_MSK
);
2619 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
2622 cmd
->cmd
.tx
.sta_id
= std_id
;
2623 if (ieee80211_get_morefrag(hdr
))
2624 tx_flags
|= TX_CMD_FLG_MORE_FRAG_MSK
;
2626 qc
= ieee80211_get_qos_ctrl(hdr
);
2628 cmd
->cmd
.tx
.tid_tspec
= (u8
) (le16_to_cpu(*qc
) & 0xf);
2629 tx_flags
&= ~TX_CMD_FLG_SEQ_CTL_MSK
;
2631 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
2633 if (ctrl
->flags
& IEEE80211_TXCTL_USE_RTS_CTS
) {
2634 tx_flags
|= TX_CMD_FLG_RTS_MSK
;
2635 tx_flags
&= ~TX_CMD_FLG_CTS_MSK
;
2636 } else if (ctrl
->flags
& IEEE80211_TXCTL_USE_CTS_PROTECT
) {
2637 tx_flags
&= ~TX_CMD_FLG_RTS_MSK
;
2638 tx_flags
|= TX_CMD_FLG_CTS_MSK
;
2641 if ((tx_flags
& TX_CMD_FLG_RTS_MSK
) || (tx_flags
& TX_CMD_FLG_CTS_MSK
))
2642 tx_flags
|= TX_CMD_FLG_FULL_TXOP_PROT_MSK
;
2644 tx_flags
&= ~(TX_CMD_FLG_ANT_SEL_MSK
);
2645 if ((fc
& IEEE80211_FCTL_FTYPE
) == IEEE80211_FTYPE_MGMT
) {
2646 if ((fc
& IEEE80211_FCTL_STYPE
) == IEEE80211_STYPE_ASSOC_REQ
||
2647 (fc
& IEEE80211_FCTL_STYPE
) == IEEE80211_STYPE_REASSOC_REQ
)
2648 cmd
->cmd
.tx
.timeout
.pm_frame_timeout
=
2651 cmd
->cmd
.tx
.timeout
.pm_frame_timeout
=
2654 cmd
->cmd
.tx
.timeout
.pm_frame_timeout
= 0;
2656 cmd
->cmd
.tx
.driver_txop
= 0;
2657 cmd
->cmd
.tx
.tx_flags
= tx_flags
;
2658 cmd
->cmd
.tx
.next_frame_len
= 0;
2661 static int iwl_get_sta_id(struct iwl_priv
*priv
, struct ieee80211_hdr
*hdr
)
2664 u16 fc
= le16_to_cpu(hdr
->frame_control
);
2666 /* If this frame is broadcast or not data then use the broadcast
2668 if (((fc
& IEEE80211_FCTL_FTYPE
) != IEEE80211_FTYPE_DATA
) ||
2669 is_multicast_ether_addr(hdr
->addr1
))
2670 return priv
->hw_setting
.bcast_sta_id
;
2672 switch (priv
->iw_mode
) {
2674 /* If this frame is part of a BSS network (we're a station), then
2675 * we use the AP's station id */
2676 case IEEE80211_IF_TYPE_STA
:
2679 /* If we are an AP, then find the station, or use BCAST */
2680 case IEEE80211_IF_TYPE_AP
:
2681 sta_id
= iwl_hw_find_station(priv
, hdr
->addr1
);
2682 if (sta_id
!= IWL_INVALID_STATION
)
2684 return priv
->hw_setting
.bcast_sta_id
;
2686 /* If this frame is part of a IBSS network, then we use the
2687 * target specific station id */
2688 case IEEE80211_IF_TYPE_IBSS
: {
2689 DECLARE_MAC_BUF(mac
);
2691 sta_id
= iwl_hw_find_station(priv
, hdr
->addr1
);
2692 if (sta_id
!= IWL_INVALID_STATION
)
2695 sta_id
= iwl_add_station(priv
, hdr
->addr1
, 0, CMD_ASYNC
);
2697 if (sta_id
!= IWL_INVALID_STATION
)
2700 IWL_DEBUG_DROP("Station %s not in station map. "
2701 "Defaulting to broadcast...\n",
2702 print_mac(mac
, hdr
->addr1
));
2703 iwl_print_hex_dump(IWL_DL_DROP
, (u8
*) hdr
, sizeof(*hdr
));
2704 return priv
->hw_setting
.bcast_sta_id
;
2707 IWL_WARNING("Unkown mode of operation: %d", priv
->iw_mode
);
2708 return priv
->hw_setting
.bcast_sta_id
;
2713 * start REPLY_TX command process
2715 static int iwl_tx_skb(struct iwl_priv
*priv
,
2716 struct sk_buff
*skb
, struct ieee80211_tx_control
*ctl
)
2718 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
2719 struct iwl_tfd_frame
*tfd
;
2721 int txq_id
= ctl
->queue
;
2722 struct iwl_tx_queue
*txq
= NULL
;
2723 struct iwl_queue
*q
= NULL
;
2724 dma_addr_t phys_addr
;
2725 dma_addr_t txcmd_phys
;
2726 struct iwl_cmd
*out_cmd
= NULL
;
2727 u16 len
, idx
, len_org
;
2728 u8 id
, hdr_len
, unicast
;
2733 u8 wait_write_ptr
= 0;
2734 unsigned long flags
;
2737 spin_lock_irqsave(&priv
->lock
, flags
);
2738 if (iwl_is_rfkill(priv
)) {
2739 IWL_DEBUG_DROP("Dropping - RF KILL\n");
2743 if (!priv
->interface_id
) {
2744 IWL_DEBUG_DROP("Dropping - !priv->interface_id\n");
2748 if ((ctl
->tx_rate
& 0xFF) == IWL_INVALID_RATE
) {
2749 IWL_ERROR("ERROR: No TX rate available.\n");
2753 unicast
= !is_multicast_ether_addr(hdr
->addr1
);
2756 fc
= le16_to_cpu(hdr
->frame_control
);
2758 #ifdef CONFIG_IWLWIFI_DEBUG
2759 if (ieee80211_is_auth(fc
))
2760 IWL_DEBUG_TX("Sending AUTH frame\n");
2761 else if (ieee80211_is_assoc_request(fc
))
2762 IWL_DEBUG_TX("Sending ASSOC frame\n");
2763 else if (ieee80211_is_reassoc_request(fc
))
2764 IWL_DEBUG_TX("Sending REASSOC frame\n");
2767 if (!iwl_is_associated(priv
) &&
2768 ((fc
& IEEE80211_FCTL_FTYPE
) == IEEE80211_FTYPE_DATA
)) {
2769 IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n");
2773 spin_unlock_irqrestore(&priv
->lock
, flags
);
2775 hdr_len
= ieee80211_get_hdrlen(fc
);
2776 sta_id
= iwl_get_sta_id(priv
, hdr
);
2777 if (sta_id
== IWL_INVALID_STATION
) {
2778 DECLARE_MAC_BUF(mac
);
2780 IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n",
2781 print_mac(mac
, hdr
->addr1
));
2785 IWL_DEBUG_RATE("station Id %d\n", sta_id
);
2787 qc
= ieee80211_get_qos_ctrl(hdr
);
2789 u8 tid
= (u8
)(le16_to_cpu(*qc
) & 0xf);
2790 seq_number
= priv
->stations
[sta_id
].tid
[tid
].seq_number
&
2792 hdr
->seq_ctrl
= cpu_to_le16(seq_number
) |
2794 __constant_cpu_to_le16(IEEE80211_SCTL_FRAG
));
2797 txq
= &priv
->txq
[txq_id
];
2800 spin_lock_irqsave(&priv
->lock
, flags
);
2802 tfd
= &txq
->bd
[q
->first_empty
];
2803 memset(tfd
, 0, sizeof(*tfd
));
2804 control_flags
= (u32
*) tfd
;
2805 idx
= get_cmd_index(q
, q
->first_empty
, 0);
2807 memset(&(txq
->txb
[q
->first_empty
]), 0, sizeof(struct iwl_tx_info
));
2808 txq
->txb
[q
->first_empty
].skb
[0] = skb
;
2809 memcpy(&(txq
->txb
[q
->first_empty
].status
.control
),
2810 ctl
, sizeof(struct ieee80211_tx_control
));
2811 out_cmd
= &txq
->cmd
[idx
];
2812 memset(&out_cmd
->hdr
, 0, sizeof(out_cmd
->hdr
));
2813 memset(&out_cmd
->cmd
.tx
, 0, sizeof(out_cmd
->cmd
.tx
));
2814 out_cmd
->hdr
.cmd
= REPLY_TX
;
2815 out_cmd
->hdr
.sequence
= cpu_to_le16((u16
)(QUEUE_TO_SEQ(txq_id
) |
2816 INDEX_TO_SEQ(q
->first_empty
)));
2817 /* copy frags header */
2818 memcpy(out_cmd
->cmd
.tx
.hdr
, hdr
, hdr_len
);
2820 /* hdr = (struct ieee80211_hdr *)out_cmd->cmd.tx.hdr; */
2821 len
= priv
->hw_setting
.tx_cmd_len
+
2822 sizeof(struct iwl_cmd_header
) + hdr_len
;
2825 len
= (len
+ 3) & ~3;
2832 txcmd_phys
= txq
->dma_addr_cmd
+ sizeof(struct iwl_cmd
) * idx
+
2833 offsetof(struct iwl_cmd
, hdr
);
2835 iwl_hw_txq_attach_buf_to_tfd(priv
, tfd
, txcmd_phys
, len
);
2837 if (!(ctl
->flags
& IEEE80211_TXCTL_DO_NOT_ENCRYPT
))
2838 iwl_build_tx_cmd_hwcrypto(priv
, ctl
, out_cmd
, skb
, 0);
2840 /* 802.11 null functions have no payload... */
2841 len
= skb
->len
- hdr_len
;
2843 phys_addr
= pci_map_single(priv
->pci_dev
, skb
->data
+ hdr_len
,
2844 len
, PCI_DMA_TODEVICE
);
2845 iwl_hw_txq_attach_buf_to_tfd(priv
, tfd
, phys_addr
, len
);
2848 /* If there is no payload, then only one TFD is used */
2850 *control_flags
= TFD_CTL_COUNT_SET(1);
2852 *control_flags
= TFD_CTL_COUNT_SET(2) |
2853 TFD_CTL_PAD_SET(U32_PAD(len
));
2855 len
= (u16
)skb
->len
;
2856 out_cmd
->cmd
.tx
.len
= cpu_to_le16(len
);
2858 /* TODO need this for burst mode later on */
2859 iwl_build_tx_cmd_basic(priv
, out_cmd
, ctl
, hdr
, unicast
, sta_id
);
2861 /* set is_hcca to 0; it probably will never be implemented */
2862 iwl_hw_build_tx_cmd_rate(priv
, out_cmd
, ctl
, hdr
, sta_id
, 0);
2864 out_cmd
->cmd
.tx
.tx_flags
&= ~TX_CMD_FLG_ANT_A_MSK
;
2865 out_cmd
->cmd
.tx
.tx_flags
&= ~TX_CMD_FLG_ANT_B_MSK
;
2867 if (!ieee80211_get_morefrag(hdr
)) {
2868 txq
->need_update
= 1;
2870 u8 tid
= (u8
)(le16_to_cpu(*qc
) & 0xf);
2871 priv
->stations
[sta_id
].tid
[tid
].seq_number
= seq_number
;
2875 txq
->need_update
= 0;
2878 iwl_print_hex_dump(IWL_DL_TX
, out_cmd
->cmd
.payload
,
2879 sizeof(out_cmd
->cmd
.tx
));
2881 iwl_print_hex_dump(IWL_DL_TX
, (u8
*)out_cmd
->cmd
.tx
.hdr
,
2882 ieee80211_get_hdrlen(fc
));
2884 q
->first_empty
= iwl_queue_inc_wrap(q
->first_empty
, q
->n_bd
);
2885 rc
= iwl_tx_queue_update_write_ptr(priv
, txq
);
2886 spin_unlock_irqrestore(&priv
->lock
, flags
);
2891 if ((iwl_queue_space(q
) < q
->high_mark
)
2892 && priv
->mac80211_registered
) {
2893 if (wait_write_ptr
) {
2894 spin_lock_irqsave(&priv
->lock
, flags
);
2895 txq
->need_update
= 1;
2896 iwl_tx_queue_update_write_ptr(priv
, txq
);
2897 spin_unlock_irqrestore(&priv
->lock
, flags
);
2900 ieee80211_stop_queue(priv
->hw
, ctl
->queue
);
2906 spin_unlock_irqrestore(&priv
->lock
, flags
);
2911 static void iwl_set_rate(struct iwl_priv
*priv
)
2913 const struct ieee80211_hw_mode
*hw
= NULL
;
2914 struct ieee80211_rate
*rate
;
2917 hw
= iwl_get_hw_mode(priv
, priv
->phymode
);
2919 priv
->active_rate
= 0;
2920 priv
->active_rate_basic
= 0;
2922 IWL_DEBUG_RATE("Setting rates for 802.11%c\n",
2923 hw
->mode
== MODE_IEEE80211A
?
2924 'a' : ((hw
->mode
== MODE_IEEE80211B
) ? 'b' : 'g'));
2926 for (i
= 0; i
< hw
->num_rates
; i
++) {
2927 rate
= &(hw
->rates
[i
]);
2928 if ((rate
->val
< IWL_RATE_COUNT
) &&
2929 (rate
->flags
& IEEE80211_RATE_SUPPORTED
)) {
2930 IWL_DEBUG_RATE("Adding rate index %d (plcp %d)%s\n",
2931 rate
->val
, iwl_rates
[rate
->val
].plcp
,
2932 (rate
->flags
& IEEE80211_RATE_BASIC
) ?
2934 priv
->active_rate
|= (1 << rate
->val
);
2935 if (rate
->flags
& IEEE80211_RATE_BASIC
)
2936 priv
->active_rate_basic
|= (1 << rate
->val
);
2938 IWL_DEBUG_RATE("Not adding rate %d (plcp %d)\n",
2939 rate
->val
, iwl_rates
[rate
->val
].plcp
);
2942 IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
2943 priv
->active_rate
, priv
->active_rate_basic
);
2946 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
2947 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
2950 if (priv
->active_rate_basic
& IWL_CCK_BASIC_RATES_MASK
)
2951 priv
->staging_rxon
.cck_basic_rates
=
2952 ((priv
->active_rate_basic
&
2953 IWL_CCK_RATES_MASK
) >> IWL_FIRST_CCK_RATE
) & 0xF;
2955 priv
->staging_rxon
.cck_basic_rates
=
2956 (IWL_CCK_BASIC_RATES_MASK
>> IWL_FIRST_CCK_RATE
) & 0xF;
2958 if (priv
->active_rate_basic
& IWL_OFDM_BASIC_RATES_MASK
)
2959 priv
->staging_rxon
.ofdm_basic_rates
=
2960 ((priv
->active_rate_basic
&
2961 (IWL_OFDM_BASIC_RATES_MASK
| IWL_RATE_6M_MASK
)) >>
2962 IWL_FIRST_OFDM_RATE
) & 0xFF;
2964 priv
->staging_rxon
.ofdm_basic_rates
=
2965 (IWL_OFDM_BASIC_RATES_MASK
>> IWL_FIRST_OFDM_RATE
) & 0xFF;
2968 static void iwl_radio_kill_sw(struct iwl_priv
*priv
, int disable_radio
)
2970 unsigned long flags
;
2972 if (!!disable_radio
== test_bit(STATUS_RF_KILL_SW
, &priv
->status
))
2975 IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n",
2976 disable_radio
? "OFF" : "ON");
2978 if (disable_radio
) {
2979 iwl_scan_cancel(priv
);
2980 /* FIXME: This is a workaround for AP */
2981 if (priv
->iw_mode
!= IEEE80211_IF_TYPE_AP
) {
2982 spin_lock_irqsave(&priv
->lock
, flags
);
2983 iwl_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
2984 CSR_UCODE_SW_BIT_RFKILL
);
2985 spin_unlock_irqrestore(&priv
->lock
, flags
);
2986 iwl_send_card_state(priv
, CARD_STATE_CMD_DISABLE
, 0);
2987 set_bit(STATUS_RF_KILL_SW
, &priv
->status
);
2992 spin_lock_irqsave(&priv
->lock
, flags
);
2993 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2995 clear_bit(STATUS_RF_KILL_SW
, &priv
->status
);
2996 spin_unlock_irqrestore(&priv
->lock
, flags
);
3001 spin_lock_irqsave(&priv
->lock
, flags
);
3002 iwl_read32(priv
, CSR_UCODE_DRV_GP1
);
3003 if (!iwl_grab_restricted_access(priv
))
3004 iwl_release_restricted_access(priv
);
3005 spin_unlock_irqrestore(&priv
->lock
, flags
);
3007 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
)) {
3008 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
3009 "disabled by HW switch\n");
3013 queue_work(priv
->workqueue
, &priv
->restart
);
3017 void iwl_set_decrypted_flag(struct iwl_priv
*priv
, struct sk_buff
*skb
,
3018 u32 decrypt_res
, struct ieee80211_rx_status
*stats
)
3021 le16_to_cpu(((struct ieee80211_hdr
*)skb
->data
)->frame_control
);
3023 if (priv
->active_rxon
.filter_flags
& RXON_FILTER_DIS_DECRYPT_MSK
)
3026 if (!(fc
& IEEE80211_FCTL_PROTECTED
))
3029 IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res
);
3030 switch (decrypt_res
& RX_RES_STATUS_SEC_TYPE_MSK
) {
3031 case RX_RES_STATUS_SEC_TYPE_TKIP
:
3032 if ((decrypt_res
& RX_RES_STATUS_DECRYPT_TYPE_MSK
) ==
3033 RX_RES_STATUS_BAD_ICV_MIC
)
3034 stats
->flag
|= RX_FLAG_MMIC_ERROR
;
3035 case RX_RES_STATUS_SEC_TYPE_WEP
:
3036 case RX_RES_STATUS_SEC_TYPE_CCMP
:
3037 if ((decrypt_res
& RX_RES_STATUS_DECRYPT_TYPE_MSK
) ==
3038 RX_RES_STATUS_DECRYPT_OK
) {
3039 IWL_DEBUG_RX("hw decrypt successfully!!!\n");
3040 stats
->flag
|= RX_FLAG_DECRYPTED
;
3049 void iwl_handle_data_packet_monitor(struct iwl_priv
*priv
,
3050 struct iwl_rx_mem_buffer
*rxb
,
3051 void *data
, short len
,
3052 struct ieee80211_rx_status
*stats
,
3055 struct iwl_rt_rx_hdr
*iwl_rt
;
3057 /* First cache any information we need before we overwrite
3058 * the information provided in the skb from the hardware */
3059 s8 signal
= stats
->ssi
;
3061 int rate
= stats
->rate
;
3062 u64 tsf
= stats
->mactime
;
3063 __le16 phy_flags_hw
= cpu_to_le16(phy_flags
);
3065 /* We received data from the HW, so stop the watchdog */
3066 if (len
> IWL_RX_BUF_SIZE
- sizeof(*iwl_rt
)) {
3067 IWL_DEBUG_DROP("Dropping too large packet in monitor\n");
3071 /* copy the frame data to write after where the radiotap header goes */
3072 iwl_rt
= (void *)rxb
->skb
->data
;
3073 memmove(iwl_rt
->payload
, data
, len
);
3075 iwl_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
3076 iwl_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
3078 /* total header + data */
3079 iwl_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(*iwl_rt
));
3081 /* Set the size of the skb to the size of the frame */
3082 skb_put(rxb
->skb
, sizeof(*iwl_rt
) + len
);
3084 /* Big bitfield of all the fields we provide in radiotap */
3085 iwl_rt
->rt_hdr
.it_present
=
3086 cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT
) |
3087 (1 << IEEE80211_RADIOTAP_FLAGS
) |
3088 (1 << IEEE80211_RADIOTAP_RATE
) |
3089 (1 << IEEE80211_RADIOTAP_CHANNEL
) |
3090 (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
) |
3091 (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE
) |
3092 (1 << IEEE80211_RADIOTAP_ANTENNA
));
3094 /* Zero the flags, we'll add to them as we go */
3095 iwl_rt
->rt_flags
= 0;
3097 iwl_rt
->rt_tsf
= cpu_to_le64(tsf
);
3099 /* Convert to dBm */
3100 iwl_rt
->rt_dbmsignal
= signal
;
3101 iwl_rt
->rt_dbmnoise
= noise
;
3103 /* Convert the channel frequency and set the flags */
3104 iwl_rt
->rt_channelMHz
= cpu_to_le16(stats
->freq
);
3105 if (!(phy_flags_hw
& RX_RES_PHY_FLAGS_BAND_24_MSK
))
3106 iwl_rt
->rt_chbitmask
=
3107 cpu_to_le16((IEEE80211_CHAN_OFDM
| IEEE80211_CHAN_5GHZ
));
3108 else if (phy_flags_hw
& RX_RES_PHY_FLAGS_MOD_CCK_MSK
)
3109 iwl_rt
->rt_chbitmask
=
3110 cpu_to_le16((IEEE80211_CHAN_CCK
| IEEE80211_CHAN_2GHZ
));
3112 iwl_rt
->rt_chbitmask
=
3113 cpu_to_le16((IEEE80211_CHAN_OFDM
| IEEE80211_CHAN_2GHZ
));
3115 rate
= iwl_rate_index_from_plcp(rate
);
3117 iwl_rt
->rt_rate
= 0;
3119 iwl_rt
->rt_rate
= iwl_rates
[rate
].ieee
;
3121 /* antenna number */
3122 iwl_rt
->rt_antenna
=
3123 le16_to_cpu(phy_flags_hw
& RX_RES_PHY_FLAGS_ANTENNA_MSK
) >> 4;
3125 /* set the preamble flag if we have it */
3126 if (phy_flags_hw
& RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK
)
3127 iwl_rt
->rt_flags
|= IEEE80211_RADIOTAP_F_SHORTPRE
;
3129 IWL_DEBUG_RX("Rx packet of %d bytes.\n", rxb
->skb
->len
);
3131 stats
->flag
|= RX_FLAG_RADIOTAP
;
3132 ieee80211_rx_irqsafe(priv
->hw
, rxb
->skb
, stats
);
3137 #define IWL_PACKET_RETRY_TIME HZ
3139 int is_duplicate_packet(struct iwl_priv
*priv
, struct ieee80211_hdr
*header
)
3141 u16 sc
= le16_to_cpu(header
->seq_ctrl
);
3142 u16 seq
= (sc
& IEEE80211_SCTL_SEQ
) >> 4;
3143 u16 frag
= sc
& IEEE80211_SCTL_FRAG
;
3144 u16
*last_seq
, *last_frag
;
3145 unsigned long *last_time
;
3147 switch (priv
->iw_mode
) {
3148 case IEEE80211_IF_TYPE_IBSS
:{
3149 struct list_head
*p
;
3150 struct iwl_ibss_seq
*entry
= NULL
;
3151 u8
*mac
= header
->addr2
;
3152 int index
= mac
[5] & (IWL_IBSS_MAC_HASH_SIZE
- 1);
3154 __list_for_each(p
, &priv
->ibss_mac_hash
[index
]) {
3156 list_entry(p
, struct iwl_ibss_seq
, list
);
3157 if (!compare_ether_addr(entry
->mac
, mac
))
3160 if (p
== &priv
->ibss_mac_hash
[index
]) {
3161 entry
= kzalloc(sizeof(*entry
), GFP_ATOMIC
);
3164 ("Cannot malloc new mac entry\n");
3167 memcpy(entry
->mac
, mac
, ETH_ALEN
);
3168 entry
->seq_num
= seq
;
3169 entry
->frag_num
= frag
;
3170 entry
->packet_time
= jiffies
;
3171 list_add(&entry
->list
,
3172 &priv
->ibss_mac_hash
[index
]);
3175 last_seq
= &entry
->seq_num
;
3176 last_frag
= &entry
->frag_num
;
3177 last_time
= &entry
->packet_time
;
3180 case IEEE80211_IF_TYPE_STA
:
3181 last_seq
= &priv
->last_seq_num
;
3182 last_frag
= &priv
->last_frag_num
;
3183 last_time
= &priv
->last_packet_time
;
3188 if ((*last_seq
== seq
) &&
3189 time_after(*last_time
+ IWL_PACKET_RETRY_TIME
, jiffies
)) {
3190 if (*last_frag
== frag
)
3192 if (*last_frag
+ 1 != frag
)
3193 /* out-of-order fragment */
3199 *last_time
= jiffies
;
3206 #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT
3208 #include "iwl-spectrum.h"
3210 #define BEACON_TIME_MASK_LOW 0x00FFFFFF
3211 #define BEACON_TIME_MASK_HIGH 0xFF000000
3212 #define TIME_UNIT 1024
3215 * extended beacon time format
3216 * time in usec will be changed into a 32-bit value in 8:24 format
3217 * the high 1 byte is the beacon counts
3218 * the lower 3 bytes is the time in usec within one beacon interval
3221 static u32
iwl_usecs_to_beacons(u32 usec
, u32 beacon_interval
)
3225 u32 interval
= beacon_interval
* 1024;
3227 if (!interval
|| !usec
)
3230 quot
= (usec
/ interval
) & (BEACON_TIME_MASK_HIGH
>> 24);
3231 rem
= (usec
% interval
) & BEACON_TIME_MASK_LOW
;
3233 return (quot
<< 24) + rem
;
3236 /* base is usually what we get from ucode with each received frame,
3237 * the same as HW timer counter counting down
3240 static __le32
iwl_add_beacon_time(u32 base
, u32 addon
, u32 beacon_interval
)
3242 u32 base_low
= base
& BEACON_TIME_MASK_LOW
;
3243 u32 addon_low
= addon
& BEACON_TIME_MASK_LOW
;
3244 u32 interval
= beacon_interval
* TIME_UNIT
;
3245 u32 res
= (base
& BEACON_TIME_MASK_HIGH
) +
3246 (addon
& BEACON_TIME_MASK_HIGH
);
3248 if (base_low
> addon_low
)
3249 res
+= base_low
- addon_low
;
3250 else if (base_low
< addon_low
) {
3251 res
+= interval
+ base_low
- addon_low
;
3256 return cpu_to_le32(res
);
3259 static int iwl_get_measurement(struct iwl_priv
*priv
,
3260 struct ieee80211_measurement_params
*params
,
3263 struct iwl_spectrum_cmd spectrum
;
3264 struct iwl_rx_packet
*res
;
3265 struct iwl_host_cmd cmd
= {
3266 .id
= REPLY_SPECTRUM_MEASUREMENT_CMD
,
3267 .data
= (void *)&spectrum
,
3268 .meta
.flags
= CMD_WANT_SKB
,
3270 u32 add_time
= le64_to_cpu(params
->start_time
);
3272 int spectrum_resp_status
;
3273 int duration
= le16_to_cpu(params
->duration
);
3275 if (iwl_is_associated(priv
))
3277 iwl_usecs_to_beacons(
3278 le64_to_cpu(params
->start_time
) - priv
->last_tsf
,
3279 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
3281 memset(&spectrum
, 0, sizeof(spectrum
));
3283 spectrum
.channel_count
= cpu_to_le16(1);
3285 RXON_FLG_TSF2HOST_MSK
| RXON_FLG_ANT_A_MSK
| RXON_FLG_DIS_DIV_MSK
;
3286 spectrum
.filter_flags
= MEASUREMENT_FILTER_FLAG
;
3287 cmd
.len
= sizeof(spectrum
);
3288 spectrum
.len
= cpu_to_le16(cmd
.len
- sizeof(spectrum
.len
));
3290 if (iwl_is_associated(priv
))
3291 spectrum
.start_time
=
3292 iwl_add_beacon_time(priv
->last_beacon_time
,
3294 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
3296 spectrum
.start_time
= 0;
3298 spectrum
.channels
[0].duration
= cpu_to_le32(duration
* TIME_UNIT
);
3299 spectrum
.channels
[0].channel
= params
->channel
;
3300 spectrum
.channels
[0].type
= type
;
3301 if (priv
->active_rxon
.flags
& RXON_FLG_BAND_24G_MSK
)
3302 spectrum
.flags
|= RXON_FLG_BAND_24G_MSK
|
3303 RXON_FLG_AUTO_DETECT_MSK
| RXON_FLG_TGG_PROTECT_MSK
;
3305 rc
= iwl_send_cmd_sync(priv
, &cmd
);
3309 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
3310 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
3311 IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
3315 spectrum_resp_status
= le16_to_cpu(res
->u
.spectrum
.status
);
3316 switch (spectrum_resp_status
) {
3317 case 0: /* Command will be handled */
3318 if (res
->u
.spectrum
.id
!= 0xff) {
3320 ("Replaced existing measurement: %d\n",
3321 res
->u
.spectrum
.id
);
3322 priv
->measurement_status
&= ~MEASUREMENT_READY
;
3324 priv
->measurement_status
|= MEASUREMENT_ACTIVE
;
3328 case 1: /* Command will not be handled */
3333 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
3339 static void iwl_txstatus_to_ieee(struct iwl_priv
*priv
,
3340 struct iwl_tx_info
*tx_sta
)
3343 tx_sta
->status
.ack_signal
= 0;
3344 tx_sta
->status
.excessive_retries
= 0;
3345 tx_sta
->status
.queue_length
= 0;
3346 tx_sta
->status
.queue_number
= 0;
3349 ieee80211_tx_status_irqsafe(priv
->hw
,
3350 tx_sta
->skb
[0], &(tx_sta
->status
));
3352 ieee80211_tx_status(priv
->hw
,
3353 tx_sta
->skb
[0], &(tx_sta
->status
));
3355 tx_sta
->skb
[0] = NULL
;
3359 * iwl_tx_queue_reclaim - Reclaim Tx queue entries no more used by NIC.
3361 * When FW advances 'R' index, all entries between old and
3362 * new 'R' index need to be reclaimed. As result, some free space
3363 * forms. If there is enough free space (> low mark), wake Tx queue.
3365 int iwl_tx_queue_reclaim(struct iwl_priv
*priv
, int txq_id
, int index
)
3367 struct iwl_tx_queue
*txq
= &priv
->txq
[txq_id
];
3368 struct iwl_queue
*q
= &txq
->q
;
3371 if ((index
>= q
->n_bd
) || (x2_queue_used(q
, index
) == 0)) {
3372 IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
3373 "is out of range [0-%d] %d %d.\n", txq_id
,
3374 index
, q
->n_bd
, q
->first_empty
, q
->last_used
);
3378 for (index
= iwl_queue_inc_wrap(index
, q
->n_bd
);
3379 q
->last_used
!= index
;
3380 q
->last_used
= iwl_queue_inc_wrap(q
->last_used
, q
->n_bd
)) {
3381 if (txq_id
!= IWL_CMD_QUEUE_NUM
) {
3382 iwl_txstatus_to_ieee(priv
,
3383 &(txq
->txb
[txq
->q
.last_used
]));
3384 iwl_hw_txq_free_tfd(priv
, txq
);
3385 } else if (nfreed
> 1) {
3386 IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index
,
3387 q
->first_empty
, q
->last_used
);
3388 queue_work(priv
->workqueue
, &priv
->restart
);
3393 if (iwl_queue_space(q
) > q
->low_mark
&& (txq_id
>= 0) &&
3394 (txq_id
!= IWL_CMD_QUEUE_NUM
) &&
3395 priv
->mac80211_registered
)
3396 ieee80211_wake_queue(priv
->hw
, txq_id
);
3402 static int iwl_is_tx_success(u32 status
)
3404 return (status
& 0xFF) == 0x1;
3407 /******************************************************************************
3409 * Generic RX handler implementations
3411 ******************************************************************************/
3412 static void iwl_rx_reply_tx(struct iwl_priv
*priv
,
3413 struct iwl_rx_mem_buffer
*rxb
)
3415 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3416 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
3417 int txq_id
= SEQ_TO_QUEUE(sequence
);
3418 int index
= SEQ_TO_INDEX(sequence
);
3419 struct iwl_tx_queue
*txq
= &priv
->txq
[txq_id
];
3420 struct ieee80211_tx_status
*tx_status
;
3421 struct iwl_tx_resp
*tx_resp
= (void *)&pkt
->u
.raw
[0];
3422 u32 status
= le32_to_cpu(tx_resp
->status
);
3424 if ((index
>= txq
->q
.n_bd
) || (x2_queue_used(&txq
->q
, index
) == 0)) {
3425 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
3426 "is out of range [0-%d] %d %d\n", txq_id
,
3427 index
, txq
->q
.n_bd
, txq
->q
.first_empty
,
3432 tx_status
= &(txq
->txb
[txq
->q
.last_used
].status
);
3434 tx_status
->retry_count
= tx_resp
->failure_frame
;
3435 tx_status
->queue_number
= status
;
3436 tx_status
->queue_length
= tx_resp
->bt_kill_count
;
3437 tx_status
->queue_length
|= tx_resp
->failure_rts
;
3440 iwl_is_tx_success(status
) ? IEEE80211_TX_STATUS_ACK
: 0;
3442 tx_status
->control
.tx_rate
= iwl_rate_index_from_plcp(tx_resp
->rate
);
3444 IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
3445 txq_id
, iwl_get_tx_fail_reason(status
), status
,
3446 tx_resp
->rate
, tx_resp
->failure_frame
);
3448 IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index
);
3450 iwl_tx_queue_reclaim(priv
, txq_id
, index
);
3452 if (iwl_check_bits(status
, TX_ABORT_REQUIRED_MSK
))
3453 IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n");
3457 static void iwl_rx_reply_alive(struct iwl_priv
*priv
,
3458 struct iwl_rx_mem_buffer
*rxb
)
3460 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3461 struct iwl_alive_resp
*palive
;
3462 struct delayed_work
*pwork
;
3464 palive
= &pkt
->u
.alive_frame
;
3466 IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
3468 palive
->is_valid
, palive
->ver_type
,
3469 palive
->ver_subtype
);
3471 if (palive
->ver_subtype
== INITIALIZE_SUBTYPE
) {
3472 IWL_DEBUG_INFO("Initialization Alive received.\n");
3473 memcpy(&priv
->card_alive_init
,
3474 &pkt
->u
.alive_frame
,
3475 sizeof(struct iwl_init_alive_resp
));
3476 pwork
= &priv
->init_alive_start
;
3478 IWL_DEBUG_INFO("Runtime Alive received.\n");
3479 memcpy(&priv
->card_alive
, &pkt
->u
.alive_frame
,
3480 sizeof(struct iwl_alive_resp
));
3481 pwork
= &priv
->alive_start
;
3482 iwl_disable_events(priv
);
3485 /* We delay the ALIVE response by 5ms to
3486 * give the HW RF Kill time to activate... */
3487 if (palive
->is_valid
== UCODE_VALID_OK
)
3488 queue_delayed_work(priv
->workqueue
, pwork
,
3489 msecs_to_jiffies(5));
3491 IWL_WARNING("uCode did not respond OK.\n");
3494 static void iwl_rx_reply_add_sta(struct iwl_priv
*priv
,
3495 struct iwl_rx_mem_buffer
*rxb
)
3497 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3499 IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt
->u
.status
);
3503 static void iwl_rx_reply_error(struct iwl_priv
*priv
,
3504 struct iwl_rx_mem_buffer
*rxb
)
3506 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3508 IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
3509 "seq 0x%04X ser 0x%08X\n",
3510 le32_to_cpu(pkt
->u
.err_resp
.error_type
),
3511 get_cmd_string(pkt
->u
.err_resp
.cmd_id
),
3512 pkt
->u
.err_resp
.cmd_id
,
3513 le16_to_cpu(pkt
->u
.err_resp
.bad_cmd_seq_num
),
3514 le32_to_cpu(pkt
->u
.err_resp
.error_info
));
3517 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
3519 static void iwl_rx_csa(struct iwl_priv
*priv
, struct iwl_rx_mem_buffer
*rxb
)
3521 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3522 struct iwl_rxon_cmd
*rxon
= (void *)&priv
->active_rxon
;
3523 struct iwl_csa_notification
*csa
= &(pkt
->u
.csa_notif
);
3524 IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
3525 le16_to_cpu(csa
->channel
), le32_to_cpu(csa
->status
));
3526 rxon
->channel
= csa
->channel
;
3527 priv
->staging_rxon
.channel
= csa
->channel
;
3530 static void iwl_rx_spectrum_measure_notif(struct iwl_priv
*priv
,
3531 struct iwl_rx_mem_buffer
*rxb
)
3533 #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT
3534 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3535 struct iwl_spectrum_notification
*report
= &(pkt
->u
.spectrum_notif
);
3537 if (!report
->state
) {
3538 IWL_DEBUG(IWL_DL_11H
| IWL_DL_INFO
,
3539 "Spectrum Measure Notification: Start\n");
3543 memcpy(&priv
->measure_report
, report
, sizeof(*report
));
3544 priv
->measurement_status
|= MEASUREMENT_READY
;
3548 static void iwl_rx_pm_sleep_notif(struct iwl_priv
*priv
,
3549 struct iwl_rx_mem_buffer
*rxb
)
3551 #ifdef CONFIG_IWLWIFI_DEBUG
3552 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3553 struct iwl_sleep_notification
*sleep
= &(pkt
->u
.sleep_notif
);
3554 IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
3555 sleep
->pm_sleep_mode
, sleep
->pm_wakeup_src
);
3559 static void iwl_rx_pm_debug_statistics_notif(struct iwl_priv
*priv
,
3560 struct iwl_rx_mem_buffer
*rxb
)
3562 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3563 IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
3564 "notification for %s:\n",
3565 le32_to_cpu(pkt
->len
), get_cmd_string(pkt
->hdr
.cmd
));
3566 iwl_print_hex_dump(IWL_DL_RADIO
, pkt
->u
.raw
, le32_to_cpu(pkt
->len
));
3569 static void iwl_bg_beacon_update(struct work_struct
*work
)
3571 struct iwl_priv
*priv
=
3572 container_of(work
, struct iwl_priv
, beacon_update
);
3573 struct sk_buff
*beacon
;
3575 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
3576 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->interface_id
, NULL
);
3579 IWL_ERROR("update beacon failed\n");
3583 mutex_lock(&priv
->mutex
);
3584 /* new beacon skb is allocated every time; dispose previous.*/
3585 if (priv
->ibss_beacon
)
3586 dev_kfree_skb(priv
->ibss_beacon
);
3588 priv
->ibss_beacon
= beacon
;
3589 mutex_unlock(&priv
->mutex
);
3591 iwl_send_beacon_cmd(priv
);
3594 static void iwl_rx_beacon_notif(struct iwl_priv
*priv
,
3595 struct iwl_rx_mem_buffer
*rxb
)
3597 #ifdef CONFIG_IWLWIFI_DEBUG
3598 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3599 struct iwl_beacon_notif
*beacon
= &(pkt
->u
.beacon_status
);
3600 u8 rate
= beacon
->beacon_notify_hdr
.rate
;
3602 IWL_DEBUG_RX("beacon status %x retries %d iss %d "
3603 "tsf %d %d rate %d\n",
3604 le32_to_cpu(beacon
->beacon_notify_hdr
.status
) & TX_STATUS_MSK
,
3605 beacon
->beacon_notify_hdr
.failure_frame
,
3606 le32_to_cpu(beacon
->ibss_mgr_status
),
3607 le32_to_cpu(beacon
->high_tsf
),
3608 le32_to_cpu(beacon
->low_tsf
), rate
);
3611 if ((priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) &&
3612 (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
)))
3613 queue_work(priv
->workqueue
, &priv
->beacon_update
);
3616 /* Service response to REPLY_SCAN_CMD (0x80) */
3617 static void iwl_rx_reply_scan(struct iwl_priv
*priv
,
3618 struct iwl_rx_mem_buffer
*rxb
)
3620 #ifdef CONFIG_IWLWIFI_DEBUG
3621 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3622 struct iwl_scanreq_notification
*notif
=
3623 (struct iwl_scanreq_notification
*)pkt
->u
.raw
;
3625 IWL_DEBUG_RX("Scan request status = 0x%x\n", notif
->status
);
3629 /* Service SCAN_START_NOTIFICATION (0x82) */
3630 static void iwl_rx_scan_start_notif(struct iwl_priv
*priv
,
3631 struct iwl_rx_mem_buffer
*rxb
)
3633 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3634 struct iwl_scanstart_notification
*notif
=
3635 (struct iwl_scanstart_notification
*)pkt
->u
.raw
;
3636 priv
->scan_start_tsf
= le32_to_cpu(notif
->tsf_low
);
3637 IWL_DEBUG_SCAN("Scan start: "
3639 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
3641 notif
->band
? "bg" : "a",
3643 notif
->tsf_low
, notif
->status
, notif
->beacon_timer
);
3646 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
3647 static void iwl_rx_scan_results_notif(struct iwl_priv
*priv
,
3648 struct iwl_rx_mem_buffer
*rxb
)
3650 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3651 struct iwl_scanresults_notification
*notif
=
3652 (struct iwl_scanresults_notification
*)pkt
->u
.raw
;
3654 IWL_DEBUG_SCAN("Scan ch.res: "
3656 "(TSF: 0x%08X:%08X) - %d "
3657 "elapsed=%lu usec (%dms since last)\n",
3659 notif
->band
? "bg" : "a",
3660 le32_to_cpu(notif
->tsf_high
),
3661 le32_to_cpu(notif
->tsf_low
),
3662 le32_to_cpu(notif
->statistics
[0]),
3663 le32_to_cpu(notif
->tsf_low
) - priv
->scan_start_tsf
,
3664 jiffies_to_msecs(elapsed_jiffies
3665 (priv
->last_scan_jiffies
, jiffies
)));
3667 priv
->last_scan_jiffies
= jiffies
;
3670 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
3671 static void iwl_rx_scan_complete_notif(struct iwl_priv
*priv
,
3672 struct iwl_rx_mem_buffer
*rxb
)
3674 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3675 struct iwl_scancomplete_notification
*scan_notif
= (void *)pkt
->u
.raw
;
3677 IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
3678 scan_notif
->scanned_channels
,
3679 scan_notif
->tsf_low
,
3680 scan_notif
->tsf_high
, scan_notif
->status
);
3682 /* The HW is no longer scanning */
3683 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
3685 /* The scan completion notification came in, so kill that timer... */
3686 cancel_delayed_work(&priv
->scan_check
);
3688 IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
3689 (priv
->scan_bands
== 2) ? "2.4" : "5.2",
3690 jiffies_to_msecs(elapsed_jiffies
3691 (priv
->scan_pass_start
, jiffies
)));
3693 /* Remove this scanned band from the list
3694 * of pending bands to scan */
3697 /* If a request to abort was given, or the scan did not succeed
3698 * then we reset the scan state machine and terminate,
3699 * re-queuing another scan if one has been requested */
3700 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
3701 IWL_DEBUG_INFO("Aborted scan completed.\n");
3702 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
3704 /* If there are more bands on this scan pass reschedule */
3705 if (priv
->scan_bands
> 0)
3709 priv
->last_scan_jiffies
= jiffies
;
3710 IWL_DEBUG_INFO("Setting scan to off\n");
3712 clear_bit(STATUS_SCANNING
, &priv
->status
);
3714 IWL_DEBUG_INFO("Scan took %dms\n",
3715 jiffies_to_msecs(elapsed_jiffies(priv
->scan_start
, jiffies
)));
3717 queue_work(priv
->workqueue
, &priv
->scan_completed
);
3722 priv
->scan_pass_start
= jiffies
;
3723 queue_work(priv
->workqueue
, &priv
->request_scan
);
3726 /* Handle notification from uCode that card's power state is changing
3727 * due to software, hardware, or critical temperature RFKILL */
3728 static void iwl_rx_card_state_notif(struct iwl_priv
*priv
,
3729 struct iwl_rx_mem_buffer
*rxb
)
3731 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3732 u32 flags
= le32_to_cpu(pkt
->u
.card_state_notif
.flags
);
3733 unsigned long status
= priv
->status
;
3735 IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
3736 (flags
& HW_CARD_DISABLED
) ? "Kill" : "On",
3737 (flags
& SW_CARD_DISABLED
) ? "Kill" : "On");
3739 iwl_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
3740 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
3742 if (flags
& HW_CARD_DISABLED
)
3743 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3745 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3748 if (flags
& SW_CARD_DISABLED
)
3749 set_bit(STATUS_RF_KILL_SW
, &priv
->status
);
3751 clear_bit(STATUS_RF_KILL_SW
, &priv
->status
);
3753 iwl_scan_cancel(priv
);
3755 if ((test_bit(STATUS_RF_KILL_HW
, &status
) !=
3756 test_bit(STATUS_RF_KILL_HW
, &priv
->status
)) ||
3757 (test_bit(STATUS_RF_KILL_SW
, &status
) !=
3758 test_bit(STATUS_RF_KILL_SW
, &priv
->status
)))
3759 queue_work(priv
->workqueue
, &priv
->rf_kill
);
3761 wake_up_interruptible(&priv
->wait_command_queue
);
3765 * iwl_setup_rx_handlers - Initialize Rx handler callbacks
3767 * Setup the RX handlers for each of the reply types sent from the uCode
3770 * This function chains into the hardware specific files for them to setup
3771 * any hardware specific handlers as well.
3773 static void iwl_setup_rx_handlers(struct iwl_priv
*priv
)
3775 priv
->rx_handlers
[REPLY_ALIVE
] = iwl_rx_reply_alive
;
3776 priv
->rx_handlers
[REPLY_ADD_STA
] = iwl_rx_reply_add_sta
;
3777 priv
->rx_handlers
[REPLY_ERROR
] = iwl_rx_reply_error
;
3778 priv
->rx_handlers
[CHANNEL_SWITCH_NOTIFICATION
] = iwl_rx_csa
;
3779 priv
->rx_handlers
[SPECTRUM_MEASURE_NOTIFICATION
] =
3780 iwl_rx_spectrum_measure_notif
;
3781 priv
->rx_handlers
[PM_SLEEP_NOTIFICATION
] = iwl_rx_pm_sleep_notif
;
3782 priv
->rx_handlers
[PM_DEBUG_STATISTIC_NOTIFIC
] =
3783 iwl_rx_pm_debug_statistics_notif
;
3784 priv
->rx_handlers
[BEACON_NOTIFICATION
] = iwl_rx_beacon_notif
;
3786 /* NOTE: iwl_rx_statistics is different based on whether
3787 * the build is for the 3945 or the 4965. See the
3788 * corresponding implementation in iwl-XXXX.c
3790 * The same handler is used for both the REPLY to a
3791 * discrete statistics request from the host as well as
3792 * for the periodic statistics notification from the uCode
3794 priv
->rx_handlers
[REPLY_STATISTICS_CMD
] = iwl_hw_rx_statistics
;
3795 priv
->rx_handlers
[STATISTICS_NOTIFICATION
] = iwl_hw_rx_statistics
;
3797 priv
->rx_handlers
[REPLY_SCAN_CMD
] = iwl_rx_reply_scan
;
3798 priv
->rx_handlers
[SCAN_START_NOTIFICATION
] = iwl_rx_scan_start_notif
;
3799 priv
->rx_handlers
[SCAN_RESULTS_NOTIFICATION
] =
3800 iwl_rx_scan_results_notif
;
3801 priv
->rx_handlers
[SCAN_COMPLETE_NOTIFICATION
] =
3802 iwl_rx_scan_complete_notif
;
3803 priv
->rx_handlers
[CARD_STATE_NOTIFICATION
] = iwl_rx_card_state_notif
;
3804 priv
->rx_handlers
[REPLY_TX
] = iwl_rx_reply_tx
;
3806 /* Setup hardware specific Rx handlers */
3807 iwl_hw_rx_handler_setup(priv
);
3811 * iwl_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
3812 * @rxb: Rx buffer to reclaim
3814 * If an Rx buffer has an async callback associated with it the callback
3815 * will be executed. The attached skb (if present) will only be freed
3816 * if the callback returns 1
3818 static void iwl_tx_cmd_complete(struct iwl_priv
*priv
,
3819 struct iwl_rx_mem_buffer
*rxb
)
3821 struct iwl_rx_packet
*pkt
= (struct iwl_rx_packet
*)rxb
->skb
->data
;
3822 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
3823 int txq_id
= SEQ_TO_QUEUE(sequence
);
3824 int index
= SEQ_TO_INDEX(sequence
);
3825 int huge
= sequence
& SEQ_HUGE_FRAME
;
3827 struct iwl_cmd
*cmd
;
3829 /* If a Tx command is being handled and it isn't in the actual
3830 * command queue then there a command routing bug has been introduced
3831 * in the queue management code. */
3832 if (txq_id
!= IWL_CMD_QUEUE_NUM
)
3833 IWL_ERROR("Error wrong command queue %d command id 0x%X\n",
3834 txq_id
, pkt
->hdr
.cmd
);
3835 BUG_ON(txq_id
!= IWL_CMD_QUEUE_NUM
);
3837 cmd_index
= get_cmd_index(&priv
->txq
[IWL_CMD_QUEUE_NUM
].q
, index
, huge
);
3838 cmd
= &priv
->txq
[IWL_CMD_QUEUE_NUM
].cmd
[cmd_index
];
3840 /* Input error checking is done when commands are added to queue. */
3841 if (cmd
->meta
.flags
& CMD_WANT_SKB
) {
3842 cmd
->meta
.source
->u
.skb
= rxb
->skb
;
3844 } else if (cmd
->meta
.u
.callback
&&
3845 !cmd
->meta
.u
.callback(priv
, cmd
, rxb
->skb
))
3848 iwl_tx_queue_reclaim(priv
, txq_id
, index
);
3850 if (!(cmd
->meta
.flags
& CMD_ASYNC
)) {
3851 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
3852 wake_up_interruptible(&priv
->wait_command_queue
);
3856 /************************** RX-FUNCTIONS ****************************/
3858 * Rx theory of operation
3860 * The host allocates 32 DMA target addresses and passes the host address
3861 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
3865 * The host/firmware share two index registers for managing the Rx buffers.
3867 * The READ index maps to the first position that the firmware may be writing
3868 * to -- the driver can read up to (but not including) this position and get
3870 * The READ index is managed by the firmware once the card is enabled.
3872 * The WRITE index maps to the last position the driver has read from -- the
3873 * position preceding WRITE is the last slot the firmware can place a packet.
3875 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
3878 * During initialization the host sets up the READ queue position to the first
3879 * INDEX position, and WRITE to the last (READ - 1 wrapped)
3881 * When the firmware places a packet in a buffer it will advance the READ index
3882 * and fire the RX interrupt. The driver can then query the READ index and
3883 * process as many packets as possible, moving the WRITE index forward as it
3884 * resets the Rx queue buffers with new memory.
3886 * The management in the driver is as follows:
3887 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
3888 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
3889 * to replensish the iwl->rxq->rx_free.
3890 * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
3891 * iwl->rxq is replenished and the READ INDEX is updated (updating the
3892 * 'processed' and 'read' driver indexes as well)
3893 * + A received packet is processed and handed to the kernel network stack,
3894 * detached from the iwl->rxq. The driver 'processed' index is updated.
3895 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
3896 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
3897 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
3898 * were enough free buffers and RX_STALLED is set it is cleared.
3903 * iwl_rx_queue_alloc() Allocates rx_free
3904 * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls
3905 * iwl_rx_queue_restock
3906 * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx
3907 * queue, updates firmware pointers, and updates
3908 * the WRITE index. If insufficient rx_free buffers
3909 * are available, schedules iwl_rx_replenish
3911 * -- enable interrupts --
3912 * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the
3913 * READ INDEX, detaching the SKB from the pool.
3914 * Moves the packet buffer from queue to rx_used.
3915 * Calls iwl_rx_queue_restock to refill any empty
3922 * iwl_rx_queue_space - Return number of free slots available in queue.
3924 static int iwl_rx_queue_space(const struct iwl_rx_queue
*q
)
3926 int s
= q
->read
- q
->write
;
3929 /* keep some buffer to not confuse full and empty queue */
3937 * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
3939 * NOTE: This function has 3945 and 4965 specific code sections
3940 * but is declared in base due to the majority of the
3941 * implementation being the same (only a numeric constant is
3945 int iwl_rx_queue_update_write_ptr(struct iwl_priv
*priv
, struct iwl_rx_queue
*q
)
3949 unsigned long flags
;
3951 spin_lock_irqsave(&q
->lock
, flags
);
3953 if (q
->need_update
== 0)
3956 if (test_bit(STATUS_POWER_PMI
, &priv
->status
)) {
3957 reg
= iwl_read32(priv
, CSR_UCODE_DRV_GP1
);
3959 if (reg
& CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP
) {
3960 iwl_set_bit(priv
, CSR_GP_CNTRL
,
3961 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
3965 rc
= iwl_grab_restricted_access(priv
);
3969 iwl_write_restricted(priv
, FH_RSCSR_CHNL0_WPTR
,
3971 iwl_release_restricted_access(priv
);
3973 iwl_write32(priv
, FH_RSCSR_CHNL0_WPTR
, q
->write
& ~0x7);
3979 spin_unlock_irqrestore(&q
->lock
, flags
);
3984 * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer pointer.
3986 * NOTE: This function has 3945 and 4965 specific code paths in it.
3988 static inline __le32
iwl_dma_addr2rbd_ptr(struct iwl_priv
*priv
,
3989 dma_addr_t dma_addr
)
3991 return cpu_to_le32((u32
)dma_addr
);
3995 * iwl_rx_queue_restock - refill RX queue from pre-allocated pool
3997 * If there are slots in the RX queue that need to be restocked,
3998 * and we have free pre-allocated buffers, fill the ranks as much
3999 * as we can pulling from rx_free.
4001 * This moves the 'write' index forward to catch up with 'processed', and
4002 * also updates the memory address in the firmware to reference the new
4005 int iwl_rx_queue_restock(struct iwl_priv
*priv
)
4007 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
4008 struct list_head
*element
;
4009 struct iwl_rx_mem_buffer
*rxb
;
4010 unsigned long flags
;
4013 spin_lock_irqsave(&rxq
->lock
, flags
);
4014 write
= rxq
->write
& ~0x7;
4015 while ((iwl_rx_queue_space(rxq
) > 0) && (rxq
->free_count
)) {
4016 element
= rxq
->rx_free
.next
;
4017 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
4019 rxq
->bd
[rxq
->write
] = iwl_dma_addr2rbd_ptr(priv
, rxb
->dma_addr
);
4020 rxq
->queue
[rxq
->write
] = rxb
;
4021 rxq
->write
= (rxq
->write
+ 1) & RX_QUEUE_MASK
;
4024 spin_unlock_irqrestore(&rxq
->lock
, flags
);
4025 /* If the pre-allocated buffer pool is dropping low, schedule to
4027 if (rxq
->free_count
<= RX_LOW_WATERMARK
)
4028 queue_work(priv
->workqueue
, &priv
->rx_replenish
);
4031 /* If we've added more space for the firmware to place data, tell it */
4032 if ((write
!= (rxq
->write
& ~0x7))
4033 || (abs(rxq
->write
- rxq
->read
) > 7)) {
4034 spin_lock_irqsave(&rxq
->lock
, flags
);
4035 rxq
->need_update
= 1;
4036 spin_unlock_irqrestore(&rxq
->lock
, flags
);
4037 rc
= iwl_rx_queue_update_write_ptr(priv
, rxq
);
4046 * iwl_rx_replensih - Move all used packet from rx_used to rx_free
4048 * When moving to rx_free an SKB is allocated for the slot.
4050 * Also restock the Rx queue via iwl_rx_queue_restock.
4051 * This is called as a scheduled work item (except for during intialization)
4053 void iwl_rx_replenish(void *data
)
4055 struct iwl_priv
*priv
= data
;
4056 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
4057 struct list_head
*element
;
4058 struct iwl_rx_mem_buffer
*rxb
;
4059 unsigned long flags
;
4060 spin_lock_irqsave(&rxq
->lock
, flags
);
4061 while (!list_empty(&rxq
->rx_used
)) {
4062 element
= rxq
->rx_used
.next
;
4063 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
4065 alloc_skb(IWL_RX_BUF_SIZE
, __GFP_NOWARN
| GFP_ATOMIC
);
4067 if (net_ratelimit())
4068 printk(KERN_CRIT DRV_NAME
4069 ": Can not allocate SKB buffers\n");
4070 /* We don't reschedule replenish work here -- we will
4071 * call the restock method and if it still needs
4072 * more buffers it will schedule replenish */
4075 priv
->alloc_rxb_skb
++;
4078 pci_map_single(priv
->pci_dev
, rxb
->skb
->data
,
4079 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
4080 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
4083 spin_unlock_irqrestore(&rxq
->lock
, flags
);
4085 spin_lock_irqsave(&priv
->lock
, flags
);
4086 iwl_rx_queue_restock(priv
);
4087 spin_unlock_irqrestore(&priv
->lock
, flags
);
4090 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
4091 * If an SKB has been detached, the POOL needs to have it's SKB set to NULL
4092 * This free routine walks the list of POOL entries and if SKB is set to
4093 * non NULL it is unmapped and freed
4095 void iwl_rx_queue_free(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
4098 for (i
= 0; i
< RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
; i
++) {
4099 if (rxq
->pool
[i
].skb
!= NULL
) {
4100 pci_unmap_single(priv
->pci_dev
,
4101 rxq
->pool
[i
].dma_addr
,
4102 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
4103 dev_kfree_skb(rxq
->pool
[i
].skb
);
4107 pci_free_consistent(priv
->pci_dev
, 4 * RX_QUEUE_SIZE
, rxq
->bd
,
4112 int iwl_rx_queue_alloc(struct iwl_priv
*priv
)
4114 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
4115 struct pci_dev
*dev
= priv
->pci_dev
;
4118 spin_lock_init(&rxq
->lock
);
4119 INIT_LIST_HEAD(&rxq
->rx_free
);
4120 INIT_LIST_HEAD(&rxq
->rx_used
);
4121 rxq
->bd
= pci_alloc_consistent(dev
, 4 * RX_QUEUE_SIZE
, &rxq
->dma_addr
);
4124 /* Fill the rx_used queue with _all_ of the Rx buffers */
4125 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++)
4126 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
4127 /* Set us so that we have processed and used all buffers, but have
4128 * not restocked the Rx queue with fresh buffers */
4129 rxq
->read
= rxq
->write
= 0;
4130 rxq
->free_count
= 0;
4131 rxq
->need_update
= 0;
4135 void iwl_rx_queue_reset(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
4137 unsigned long flags
;
4139 spin_lock_irqsave(&rxq
->lock
, flags
);
4140 INIT_LIST_HEAD(&rxq
->rx_free
);
4141 INIT_LIST_HEAD(&rxq
->rx_used
);
4142 /* Fill the rx_used queue with _all_ of the Rx buffers */
4143 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++) {
4144 /* In the reset function, these buffers may have been allocated
4145 * to an SKB, so we need to unmap and free potential storage */
4146 if (rxq
->pool
[i
].skb
!= NULL
) {
4147 pci_unmap_single(priv
->pci_dev
,
4148 rxq
->pool
[i
].dma_addr
,
4149 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
4150 priv
->alloc_rxb_skb
--;
4151 dev_kfree_skb(rxq
->pool
[i
].skb
);
4152 rxq
->pool
[i
].skb
= NULL
;
4154 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
4157 /* Set us so that we have processed and used all buffers, but have
4158 * not restocked the Rx queue with fresh buffers */
4159 rxq
->read
= rxq
->write
= 0;
4160 rxq
->free_count
= 0;
4161 spin_unlock_irqrestore(&rxq
->lock
, flags
);
4164 /* Convert linear signal-to-noise ratio into dB */
4165 static u8 ratio2dB
[100] = {
4166 /* 0 1 2 3 4 5 6 7 8 9 */
4167 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
4168 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
4169 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
4170 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
4171 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
4172 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
4173 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
4174 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
4175 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
4176 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
4179 /* Calculates a relative dB value from a ratio of linear
4180 * (i.e. not dB) signal levels.
4181 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
4182 int iwl_calc_db_from_ratio(int sig_ratio
)
4184 /* Anything above 1000:1 just report as 60 dB */
4185 if (sig_ratio
> 1000)
4188 /* Above 100:1, divide by 10 and use table,
4189 * add 20 dB to make up for divide by 10 */
4190 if (sig_ratio
> 100)
4191 return (20 + (int)ratio2dB
[sig_ratio
/10]);
4193 /* We shouldn't see this */
4197 /* Use table for ratios 1:1 - 99:1 */
4198 return (int)ratio2dB
[sig_ratio
];
4201 #define PERFECT_RSSI (-20) /* dBm */
4202 #define WORST_RSSI (-95) /* dBm */
4203 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
4205 /* Calculate an indication of rx signal quality (a percentage, not dBm!).
4206 * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
4207 * about formulas used below. */
4208 int iwl_calc_sig_qual(int rssi_dbm
, int noise_dbm
)
4211 int degradation
= PERFECT_RSSI
- rssi_dbm
;
4213 /* If we get a noise measurement, use signal-to-noise ratio (SNR)
4214 * as indicator; formula is (signal dbm - noise dbm).
4215 * SNR at or above 40 is a great signal (100%).
4216 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
4217 * Weakest usable signal is usually 10 - 15 dB SNR. */
4219 if (rssi_dbm
- noise_dbm
>= 40)
4221 else if (rssi_dbm
< noise_dbm
)
4223 sig_qual
= ((rssi_dbm
- noise_dbm
) * 5) / 2;
4225 /* Else use just the signal level.
4226 * This formula is a least squares fit of data points collected and
4227 * compared with a reference system that had a percentage (%) display
4228 * for signal quality. */
4230 sig_qual
= (100 * (RSSI_RANGE
* RSSI_RANGE
) - degradation
*
4231 (15 * RSSI_RANGE
+ 62 * degradation
)) /
4232 (RSSI_RANGE
* RSSI_RANGE
);
4236 else if (sig_qual
< 1)
4243 * iwl_rx_handle - Main entry function for receiving responses from the uCode
4245 * Uses the priv->rx_handlers callback function array to invoke
4246 * the appropriate handlers, including command responses,
4247 * frame-received notifications, and other notifications.
4249 static void iwl_rx_handle(struct iwl_priv
*priv
)
4251 struct iwl_rx_mem_buffer
*rxb
;
4252 struct iwl_rx_packet
*pkt
;
4253 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
4256 unsigned long flags
;
4258 r
= iwl_hw_get_rx_read(priv
);
4261 /* Rx interrupt, but nothing sent from uCode */
4263 IWL_DEBUG(IWL_DL_RX
| IWL_DL_ISR
, "r = %d, i = %d\n", r
, i
);
4266 rxb
= rxq
->queue
[i
];
4268 /* If an RXB doesn't have a queue slot associated with it
4269 * then a bug has been introduced in the queue refilling
4270 * routines -- catch it here */
4271 BUG_ON(rxb
== NULL
);
4273 rxq
->queue
[i
] = NULL
;
4275 pci_dma_sync_single_for_cpu(priv
->pci_dev
, rxb
->dma_addr
,
4277 PCI_DMA_FROMDEVICE
);
4278 pkt
= (struct iwl_rx_packet
*)rxb
->skb
->data
;
4280 /* Reclaim a command buffer only if this packet is a response
4281 * to a (driver-originated) command.
4282 * If the packet (e.g. Rx frame) originated from uCode,
4283 * there is no command buffer to reclaim.
4284 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
4285 * but apparently a few don't get set; catch them here. */
4286 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
4287 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
4288 (pkt
->hdr
.cmd
!= REPLY_TX
);
4290 /* Based on type of command response or notification,
4291 * handle those that need handling via function in
4292 * rx_handlers table. See iwl_setup_rx_handlers() */
4293 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
4294 IWL_DEBUG(IWL_DL_HOST_COMMAND
| IWL_DL_RX
| IWL_DL_ISR
,
4295 "r = %d, i = %d, %s, 0x%02x\n", r
, i
,
4296 get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
4297 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
4299 /* No handling needed */
4300 IWL_DEBUG(IWL_DL_HOST_COMMAND
| IWL_DL_RX
| IWL_DL_ISR
,
4301 "r %d i %d No handler needed for %s, 0x%02x\n",
4302 r
, i
, get_cmd_string(pkt
->hdr
.cmd
),
4307 /* Invoke any callbacks, transfer the skb to caller,
4308 * and fire off the (possibly) blocking iwl_send_cmd()
4309 * as we reclaim the driver command queue */
4310 if (rxb
&& rxb
->skb
)
4311 iwl_tx_cmd_complete(priv
, rxb
);
4313 IWL_WARNING("Claim null rxb?\n");
4316 /* For now we just don't re-use anything. We can tweak this
4317 * later to try and re-use notification packets and SKBs that
4318 * fail to Rx correctly */
4319 if (rxb
->skb
!= NULL
) {
4320 priv
->alloc_rxb_skb
--;
4321 dev_kfree_skb_any(rxb
->skb
);
4325 pci_unmap_single(priv
->pci_dev
, rxb
->dma_addr
,
4326 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
4327 spin_lock_irqsave(&rxq
->lock
, flags
);
4328 list_add_tail(&rxb
->list
, &priv
->rxq
.rx_used
);
4329 spin_unlock_irqrestore(&rxq
->lock
, flags
);
4330 i
= (i
+ 1) & RX_QUEUE_MASK
;
4333 /* Backtrack one entry */
4335 iwl_rx_queue_restock(priv
);
4338 int iwl_tx_queue_update_write_ptr(struct iwl_priv
*priv
,
4339 struct iwl_tx_queue
*txq
)
4343 int txq_id
= txq
->q
.id
;
4345 if (txq
->need_update
== 0)
4348 /* if we're trying to save power */
4349 if (test_bit(STATUS_POWER_PMI
, &priv
->status
)) {
4350 /* wake up nic if it's powered down ...
4351 * uCode will wake up, and interrupt us again, so next
4352 * time we'll skip this part. */
4353 reg
= iwl_read32(priv
, CSR_UCODE_DRV_GP1
);
4355 if (reg
& CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP
) {
4356 IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg
);
4357 iwl_set_bit(priv
, CSR_GP_CNTRL
,
4358 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
4362 /* restore this queue's parameters in nic hardware. */
4363 rc
= iwl_grab_restricted_access(priv
);
4366 iwl_write_restricted(priv
, HBUS_TARG_WRPTR
,
4367 txq
->q
.first_empty
| (txq_id
<< 8));
4368 iwl_release_restricted_access(priv
);
4370 /* else not in power-save mode, uCode will never sleep when we're
4371 * trying to tx (during RFKILL, we're not trying to tx). */
4373 iwl_write32(priv
, HBUS_TARG_WRPTR
,
4374 txq
->q
.first_empty
| (txq_id
<< 8));
4376 txq
->need_update
= 0;
4381 #ifdef CONFIG_IWLWIFI_DEBUG
4382 static void iwl_print_rx_config_cmd(struct iwl_rxon_cmd
*rxon
)
4384 DECLARE_MAC_BUF(mac
);
4386 IWL_DEBUG_RADIO("RX CONFIG:\n");
4387 iwl_print_hex_dump(IWL_DL_RADIO
, (u8
*) rxon
, sizeof(*rxon
));
4388 IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon
->channel
));
4389 IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon
->flags
));
4390 IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
4391 le32_to_cpu(rxon
->filter_flags
));
4392 IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon
->dev_type
);
4393 IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
4394 rxon
->ofdm_basic_rates
);
4395 IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon
->cck_basic_rates
);
4396 IWL_DEBUG_RADIO("u8[6] node_addr: %s\n",
4397 print_mac(mac
, rxon
->node_addr
));
4398 IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n",
4399 print_mac(mac
, rxon
->bssid_addr
));
4400 IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon
->assoc_id
));
4404 static void iwl_enable_interrupts(struct iwl_priv
*priv
)
4406 IWL_DEBUG_ISR("Enabling interrupts\n");
4407 set_bit(STATUS_INT_ENABLED
, &priv
->status
);
4408 iwl_write32(priv
, CSR_INT_MASK
, CSR_INI_SET_MASK
);
4411 static inline void iwl_disable_interrupts(struct iwl_priv
*priv
)
4413 clear_bit(STATUS_INT_ENABLED
, &priv
->status
);
4415 /* disable interrupts from uCode/NIC to host */
4416 iwl_write32(priv
, CSR_INT_MASK
, 0x00000000);
4418 /* acknowledge/clear/reset any interrupts still pending
4419 * from uCode or flow handler (Rx/Tx DMA) */
4420 iwl_write32(priv
, CSR_INT
, 0xffffffff);
4421 iwl_write32(priv
, CSR_FH_INT_STATUS
, 0xffffffff);
4422 IWL_DEBUG_ISR("Disabled interrupts\n");
4425 static const char *desc_lookup(int i
)
4433 return "BAD_CHECKSUM";
4435 return "NMI_INTERRUPT";
4439 return "FATAL_ERROR";
4445 #define ERROR_START_OFFSET (1 * sizeof(u32))
4446 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
4448 static void iwl_dump_nic_error_log(struct iwl_priv
*priv
)
4451 u32 desc
, time
, count
, base
, data1
;
4452 u32 blink1
, blink2
, ilink1
, ilink2
;
4455 base
= le32_to_cpu(priv
->card_alive
.error_event_table_ptr
);
4457 if (!iwl_hw_valid_rtc_data_addr(base
)) {
4458 IWL_ERROR("Not valid error log pointer 0x%08X\n", base
);
4462 rc
= iwl_grab_restricted_access(priv
);
4464 IWL_WARNING("Can not read from adapter at this time.\n");
4468 count
= iwl_read_restricted_mem(priv
, base
);
4470 if (ERROR_START_OFFSET
<= count
* ERROR_ELEM_SIZE
) {
4471 IWL_ERROR("Start IWL Error Log Dump:\n");
4472 IWL_ERROR("Status: 0x%08lX, Config: %08X count: %d\n",
4473 priv
->status
, priv
->config
, count
);
4476 IWL_ERROR("Desc Time asrtPC blink2 "
4477 "ilink1 nmiPC Line\n");
4478 for (i
= ERROR_START_OFFSET
;
4479 i
< (count
* ERROR_ELEM_SIZE
) + ERROR_START_OFFSET
;
4480 i
+= ERROR_ELEM_SIZE
) {
4481 desc
= iwl_read_restricted_mem(priv
, base
+ i
);
4483 iwl_read_restricted_mem(priv
, base
+ i
+ 1 * sizeof(u32
));
4485 iwl_read_restricted_mem(priv
, base
+ i
+ 2 * sizeof(u32
));
4487 iwl_read_restricted_mem(priv
, base
+ i
+ 3 * sizeof(u32
));
4489 iwl_read_restricted_mem(priv
, base
+ i
+ 4 * sizeof(u32
));
4491 iwl_read_restricted_mem(priv
, base
+ i
+ 5 * sizeof(u32
));
4493 iwl_read_restricted_mem(priv
, base
+ i
+ 6 * sizeof(u32
));
4496 ("%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
4497 desc_lookup(desc
), desc
, time
, blink1
, blink2
,
4498 ilink1
, ilink2
, data1
);
4501 iwl_release_restricted_access(priv
);
4505 #define EVENT_START_OFFSET (4 * sizeof(u32))
4508 * iwl_print_event_log - Dump error event log to syslog
4510 * NOTE: Must be called with iwl_grab_restricted_access() already obtained!
4512 static void iwl_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
4513 u32 num_events
, u32 mode
)
4516 u32 base
; /* SRAM byte address of event log header */
4517 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
4518 u32 ptr
; /* SRAM byte address of log data */
4519 u32 ev
, time
, data
; /* event log data */
4521 if (num_events
== 0)
4524 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
4527 event_size
= 2 * sizeof(u32
);
4529 event_size
= 3 * sizeof(u32
);
4531 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
4533 /* "time" is actually "data" for mode 0 (no timestamp).
4534 * place event id # at far right for easier visual parsing. */
4535 for (i
= 0; i
< num_events
; i
++) {
4536 ev
= iwl_read_restricted_mem(priv
, ptr
);
4538 time
= iwl_read_restricted_mem(priv
, ptr
);
4541 IWL_ERROR("0x%08x\t%04u\n", time
, ev
); /* data, ev */
4543 data
= iwl_read_restricted_mem(priv
, ptr
);
4545 IWL_ERROR("%010u\t0x%08x\t%04u\n", time
, data
, ev
);
4550 static void iwl_dump_nic_event_log(struct iwl_priv
*priv
)
4553 u32 base
; /* SRAM byte address of event log header */
4554 u32 capacity
; /* event log capacity in # entries */
4555 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
4556 u32 num_wraps
; /* # times uCode wrapped to top of log */
4557 u32 next_entry
; /* index of next entry to be written by uCode */
4558 u32 size
; /* # entries that we'll print */
4560 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
4561 if (!iwl_hw_valid_rtc_data_addr(base
)) {
4562 IWL_ERROR("Invalid event log pointer 0x%08X\n", base
);
4566 rc
= iwl_grab_restricted_access(priv
);
4568 IWL_WARNING("Can not read from adapter at this time.\n");
4572 /* event log header */
4573 capacity
= iwl_read_restricted_mem(priv
, base
);
4574 mode
= iwl_read_restricted_mem(priv
, base
+ (1 * sizeof(u32
)));
4575 num_wraps
= iwl_read_restricted_mem(priv
, base
+ (2 * sizeof(u32
)));
4576 next_entry
= iwl_read_restricted_mem(priv
, base
+ (3 * sizeof(u32
)));
4578 size
= num_wraps
? capacity
: next_entry
;
4580 /* bail out if nothing in log */
4582 IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
4583 iwl_release_restricted_access(priv
);
4587 IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
4590 /* if uCode has wrapped back to top of log, start at the oldest entry,
4591 * i.e the next one that uCode would fill. */
4593 iwl_print_event_log(priv
, next_entry
,
4594 capacity
- next_entry
, mode
);
4596 /* (then/else) start at top of log */
4597 iwl_print_event_log(priv
, 0, next_entry
, mode
);
4599 iwl_release_restricted_access(priv
);
4603 * iwl_irq_handle_error - called for HW or SW error interrupt from card
4605 static void iwl_irq_handle_error(struct iwl_priv
*priv
)
4607 /* Set the FW error flag -- cleared on iwl_down */
4608 set_bit(STATUS_FW_ERROR
, &priv
->status
);
4610 /* Cancel currently queued command. */
4611 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
4613 #ifdef CONFIG_IWLWIFI_DEBUG
4614 if (iwl_debug_level
& IWL_DL_FW_ERRORS
) {
4615 iwl_dump_nic_error_log(priv
);
4616 iwl_dump_nic_event_log(priv
);
4617 iwl_print_rx_config_cmd(&priv
->staging_rxon
);
4621 wake_up_interruptible(&priv
->wait_command_queue
);
4623 /* Keep the restart process from trying to send host
4624 * commands by clearing the INIT status bit */
4625 clear_bit(STATUS_READY
, &priv
->status
);
4627 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
4628 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_FW_ERRORS
,
4629 "Restarting adapter due to uCode error.\n");
4631 if (iwl_is_associated(priv
)) {
4632 memcpy(&priv
->recovery_rxon
, &priv
->active_rxon
,
4633 sizeof(priv
->recovery_rxon
));
4634 priv
->error_recovering
= 1;
4636 queue_work(priv
->workqueue
, &priv
->restart
);
4640 static void iwl_error_recovery(struct iwl_priv
*priv
)
4642 unsigned long flags
;
4644 memcpy(&priv
->staging_rxon
, &priv
->recovery_rxon
,
4645 sizeof(priv
->staging_rxon
));
4646 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
4647 iwl_commit_rxon(priv
);
4649 iwl_add_station(priv
, priv
->bssid
, 1, 0);
4651 spin_lock_irqsave(&priv
->lock
, flags
);
4652 priv
->assoc_id
= le16_to_cpu(priv
->staging_rxon
.assoc_id
);
4653 priv
->error_recovering
= 0;
4654 spin_unlock_irqrestore(&priv
->lock
, flags
);
4657 static void iwl_irq_tasklet(struct iwl_priv
*priv
)
4659 u32 inta
, handled
= 0;
4661 unsigned long flags
;
4662 #ifdef CONFIG_IWLWIFI_DEBUG
4666 spin_lock_irqsave(&priv
->lock
, flags
);
4668 /* Ack/clear/reset pending uCode interrupts.
4669 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
4670 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
4671 inta
= iwl_read32(priv
, CSR_INT
);
4672 iwl_write32(priv
, CSR_INT
, inta
);
4674 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
4675 * Any new interrupts that happen after this, either while we're
4676 * in this tasklet, or later, will show up in next ISR/tasklet. */
4677 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
4678 iwl_write32(priv
, CSR_FH_INT_STATUS
, inta_fh
);
4680 #ifdef CONFIG_IWLWIFI_DEBUG
4681 if (iwl_debug_level
& IWL_DL_ISR
) {
4682 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
); /* just for debug */
4683 IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4684 inta
, inta_mask
, inta_fh
);
4688 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
4689 * atomic, make sure that inta covers all the interrupts that
4690 * we've discovered, even if FH interrupt came in just after
4691 * reading CSR_INT. */
4692 if (inta_fh
& CSR_FH_INT_RX_MASK
)
4693 inta
|= CSR_INT_BIT_FH_RX
;
4694 if (inta_fh
& CSR_FH_INT_TX_MASK
)
4695 inta
|= CSR_INT_BIT_FH_TX
;
4697 /* Now service all interrupt bits discovered above. */
4698 if (inta
& CSR_INT_BIT_HW_ERR
) {
4699 IWL_ERROR("Microcode HW error detected. Restarting.\n");
4701 /* Tell the device to stop sending interrupts */
4702 iwl_disable_interrupts(priv
);
4704 iwl_irq_handle_error(priv
);
4706 handled
|= CSR_INT_BIT_HW_ERR
;
4708 spin_unlock_irqrestore(&priv
->lock
, flags
);
4713 #ifdef CONFIG_IWLWIFI_DEBUG
4714 if (iwl_debug_level
& (IWL_DL_ISR
)) {
4715 /* NIC fires this, but we don't use it, redundant with WAKEUP */
4716 if (inta
& CSR_INT_BIT_MAC_CLK_ACTV
)
4717 IWL_DEBUG_ISR("Microcode started or stopped.\n");
4719 /* Alive notification via Rx interrupt will do the real work */
4720 if (inta
& CSR_INT_BIT_ALIVE
)
4721 IWL_DEBUG_ISR("Alive interrupt\n");
4724 /* Safely ignore these bits for debug checks below */
4725 inta
&= ~(CSR_INT_BIT_MAC_CLK_ACTV
| CSR_INT_BIT_ALIVE
);
4727 /* HW RF KILL switch toggled (4965 only) */
4728 if (inta
& CSR_INT_BIT_RF_KILL
) {
4730 if (!(iwl_read32(priv
, CSR_GP_CNTRL
) &
4731 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
))
4734 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_RF_KILL
| IWL_DL_ISR
,
4735 "RF_KILL bit toggled to %s.\n",
4736 hw_rf_kill
? "disable radio":"enable radio");
4738 /* Queue restart only if RF_KILL switch was set to "kill"
4739 * when we loaded driver, and is now set to "enable".
4740 * After we're Alive, RF_KILL gets handled by
4741 * iwl_rx_card_state_notif() */
4742 if (!hw_rf_kill
&& !test_bit(STATUS_ALIVE
, &priv
->status
))
4743 queue_work(priv
->workqueue
, &priv
->restart
);
4745 handled
|= CSR_INT_BIT_RF_KILL
;
4748 /* Chip got too hot and stopped itself (4965 only) */
4749 if (inta
& CSR_INT_BIT_CT_KILL
) {
4750 IWL_ERROR("Microcode CT kill error detected.\n");
4751 handled
|= CSR_INT_BIT_CT_KILL
;
4754 /* Error detected by uCode */
4755 if (inta
& CSR_INT_BIT_SW_ERR
) {
4756 IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n",
4758 iwl_irq_handle_error(priv
);
4759 handled
|= CSR_INT_BIT_SW_ERR
;
4762 /* uCode wakes up after power-down sleep */
4763 if (inta
& CSR_INT_BIT_WAKEUP
) {
4764 IWL_DEBUG_ISR("Wakeup interrupt\n");
4765 iwl_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
4766 iwl_tx_queue_update_write_ptr(priv
, &priv
->txq
[0]);
4767 iwl_tx_queue_update_write_ptr(priv
, &priv
->txq
[1]);
4768 iwl_tx_queue_update_write_ptr(priv
, &priv
->txq
[2]);
4769 iwl_tx_queue_update_write_ptr(priv
, &priv
->txq
[3]);
4770 iwl_tx_queue_update_write_ptr(priv
, &priv
->txq
[4]);
4771 iwl_tx_queue_update_write_ptr(priv
, &priv
->txq
[5]);
4773 handled
|= CSR_INT_BIT_WAKEUP
;
4776 /* All uCode command responses, including Tx command responses,
4777 * Rx "responses" (frame-received notification), and other
4778 * notifications from uCode come through here*/
4779 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
4780 iwl_rx_handle(priv
);
4781 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
4784 if (inta
& CSR_INT_BIT_FH_TX
) {
4785 IWL_DEBUG_ISR("Tx interrupt\n");
4787 iwl_write32(priv
, CSR_FH_INT_STATUS
, (1 << 6));
4788 if (!iwl_grab_restricted_access(priv
)) {
4789 iwl_write_restricted(priv
,
4791 (ALM_FH_SRVC_CHNL
), 0x0);
4792 iwl_release_restricted_access(priv
);
4794 handled
|= CSR_INT_BIT_FH_TX
;
4797 if (inta
& ~handled
)
4798 IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
4800 if (inta
& ~CSR_INI_SET_MASK
) {
4801 IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
4802 inta
& ~CSR_INI_SET_MASK
);
4803 IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh
);
4806 /* Re-enable all interrupts */
4807 iwl_enable_interrupts(priv
);
4809 #ifdef CONFIG_IWLWIFI_DEBUG
4810 if (iwl_debug_level
& (IWL_DL_ISR
)) {
4811 inta
= iwl_read32(priv
, CSR_INT
);
4812 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
4813 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
4814 IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
4815 "flags 0x%08lx\n", inta
, inta_mask
, inta_fh
, flags
);
4818 spin_unlock_irqrestore(&priv
->lock
, flags
);
4821 static irqreturn_t
iwl_isr(int irq
, void *data
)
4823 struct iwl_priv
*priv
= data
;
4824 u32 inta
, inta_mask
;
4829 spin_lock(&priv
->lock
);
4831 /* Disable (but don't clear!) interrupts here to avoid
4832 * back-to-back ISRs and sporadic interrupts from our NIC.
4833 * If we have something to service, the tasklet will re-enable ints.
4834 * If we *don't* have something, we'll re-enable before leaving here. */
4835 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
); /* just for debug */
4836 iwl_write32(priv
, CSR_INT_MASK
, 0x00000000);
4838 /* Discover which interrupts are active/pending */
4839 inta
= iwl_read32(priv
, CSR_INT
);
4840 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
4842 /* Ignore interrupt if there's nothing in NIC to service.
4843 * This may be due to IRQ shared with another device,
4844 * or due to sporadic interrupts thrown from our NIC. */
4845 if (!inta
&& !inta_fh
) {
4846 IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
4850 if ((inta
== 0xFFFFFFFF) || ((inta
& 0xFFFFFFF0) == 0xa5a5a5a0)) {
4851 /* Hardware disappeared */
4852 IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta
);
4856 IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4857 inta
, inta_mask
, inta_fh
);
4859 /* iwl_irq_tasklet() will service interrupts and re-enable them */
4860 tasklet_schedule(&priv
->irq_tasklet
);
4862 spin_unlock(&priv
->lock
);
4867 /* re-enable interrupts here since we don't have anything to service. */
4868 iwl_enable_interrupts(priv
);
4869 spin_unlock(&priv
->lock
);
4873 /************************** EEPROM BANDS ****************************
4875 * The iwl_eeprom_band definitions below provide the mapping from the
4876 * EEPROM contents to the specific channel number supported for each
4879 * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
4880 * definition below maps to physical channel 42 in the 5.2GHz spectrum.
4881 * The specific geography and calibration information for that channel
4882 * is contained in the eeprom map itself.
4884 * During init, we copy the eeprom information and channel map
4885 * information into priv->channel_info_24/52 and priv->channel_map_24/52
4887 * channel_map_24/52 provides the index in the channel_info array for a
4888 * given channel. We have to have two separate maps as there is channel
4889 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
4892 * A value of 0xff stored in the channel_map indicates that the channel
4893 * is not supported by the hardware at all.
4895 * A value of 0xfe in the channel_map indicates that the channel is not
4896 * valid for Tx with the current hardware. This means that
4897 * while the system can tune and receive on a given channel, it may not
4898 * be able to associate or transmit any frames on that
4899 * channel. There is no corresponding channel information for that
4902 *********************************************************************/
4905 static const u8 iwl_eeprom_band_1
[14] = {
4906 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
4910 static const u8 iwl_eeprom_band_2
[] = {
4911 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
4914 static const u8 iwl_eeprom_band_3
[] = { /* 5205-5320MHz */
4915 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
4918 static const u8 iwl_eeprom_band_4
[] = { /* 5500-5700MHz */
4919 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
4922 static const u8 iwl_eeprom_band_5
[] = { /* 5725-5825MHz */
4923 145, 149, 153, 157, 161, 165
4926 static void iwl_init_band_reference(const struct iwl_priv
*priv
, int band
,
4927 int *eeprom_ch_count
,
4928 const struct iwl_eeprom_channel
4930 const u8
**eeprom_ch_index
)
4933 case 1: /* 2.4GHz band */
4934 *eeprom_ch_count
= ARRAY_SIZE(iwl_eeprom_band_1
);
4935 *eeprom_ch_info
= priv
->eeprom
.band_1_channels
;
4936 *eeprom_ch_index
= iwl_eeprom_band_1
;
4938 case 2: /* 5.2GHz band */
4939 *eeprom_ch_count
= ARRAY_SIZE(iwl_eeprom_band_2
);
4940 *eeprom_ch_info
= priv
->eeprom
.band_2_channels
;
4941 *eeprom_ch_index
= iwl_eeprom_band_2
;
4943 case 3: /* 5.2GHz band */
4944 *eeprom_ch_count
= ARRAY_SIZE(iwl_eeprom_band_3
);
4945 *eeprom_ch_info
= priv
->eeprom
.band_3_channels
;
4946 *eeprom_ch_index
= iwl_eeprom_band_3
;
4948 case 4: /* 5.2GHz band */
4949 *eeprom_ch_count
= ARRAY_SIZE(iwl_eeprom_band_4
);
4950 *eeprom_ch_info
= priv
->eeprom
.band_4_channels
;
4951 *eeprom_ch_index
= iwl_eeprom_band_4
;
4953 case 5: /* 5.2GHz band */
4954 *eeprom_ch_count
= ARRAY_SIZE(iwl_eeprom_band_5
);
4955 *eeprom_ch_info
= priv
->eeprom
.band_5_channels
;
4956 *eeprom_ch_index
= iwl_eeprom_band_5
;
4964 const struct iwl_channel_info
*iwl_get_channel_info(const struct iwl_priv
*priv
,
4965 int phymode
, u16 channel
)
4970 case MODE_IEEE80211A
:
4971 for (i
= 14; i
< priv
->channel_count
; i
++) {
4972 if (priv
->channel_info
[i
].channel
== channel
)
4973 return &priv
->channel_info
[i
];
4977 case MODE_IEEE80211B
:
4978 case MODE_IEEE80211G
:
4979 if (channel
>= 1 && channel
<= 14)
4980 return &priv
->channel_info
[channel
- 1];
4988 #define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
4991 static int iwl_init_channel_map(struct iwl_priv
*priv
)
4993 int eeprom_ch_count
= 0;
4994 const u8
*eeprom_ch_index
= NULL
;
4995 const struct iwl_eeprom_channel
*eeprom_ch_info
= NULL
;
4997 struct iwl_channel_info
*ch_info
;
4999 if (priv
->channel_count
) {
5000 IWL_DEBUG_INFO("Channel map already initialized.\n");
5004 if (priv
->eeprom
.version
< 0x2f) {
5005 IWL_WARNING("Unsupported EEPROM version: 0x%04X\n",
5006 priv
->eeprom
.version
);
5010 IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
5012 priv
->channel_count
=
5013 ARRAY_SIZE(iwl_eeprom_band_1
) +
5014 ARRAY_SIZE(iwl_eeprom_band_2
) +
5015 ARRAY_SIZE(iwl_eeprom_band_3
) +
5016 ARRAY_SIZE(iwl_eeprom_band_4
) +
5017 ARRAY_SIZE(iwl_eeprom_band_5
);
5019 IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv
->channel_count
);
5021 priv
->channel_info
= kzalloc(sizeof(struct iwl_channel_info
) *
5022 priv
->channel_count
, GFP_KERNEL
);
5023 if (!priv
->channel_info
) {
5024 IWL_ERROR("Could not allocate channel_info\n");
5025 priv
->channel_count
= 0;
5029 ch_info
= priv
->channel_info
;
5031 /* Loop through the 5 EEPROM bands adding them in order to the
5032 * channel map we maintain (that contains additional information than
5033 * what just in the EEPROM) */
5034 for (band
= 1; band
<= 5; band
++) {
5036 iwl_init_band_reference(priv
, band
, &eeprom_ch_count
,
5037 &eeprom_ch_info
, &eeprom_ch_index
);
5039 /* Loop through each band adding each of the channels */
5040 for (ch
= 0; ch
< eeprom_ch_count
; ch
++) {
5041 ch_info
->channel
= eeprom_ch_index
[ch
];
5042 ch_info
->phymode
= (band
== 1) ? MODE_IEEE80211B
:
5045 /* permanently store EEPROM's channel regulatory flags
5046 * and max power in channel info database. */
5047 ch_info
->eeprom
= eeprom_ch_info
[ch
];
5049 /* Copy the run-time flags so they are there even on
5050 * invalid channels */
5051 ch_info
->flags
= eeprom_ch_info
[ch
].flags
;
5053 if (!(is_channel_valid(ch_info
))) {
5054 IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
5058 is_channel_a_band(ch_info
) ?
5064 /* Initialize regulatory-based run-time data */
5065 ch_info
->max_power_avg
= ch_info
->curr_txpow
=
5066 eeprom_ch_info
[ch
].max_power_avg
;
5067 ch_info
->scan_power
= eeprom_ch_info
[ch
].max_power_avg
;
5068 ch_info
->min_power
= 0;
5070 IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x"
5071 " %ddBm): Ad-Hoc %ssupported\n",
5073 is_channel_a_band(ch_info
) ?
5075 CHECK_AND_PRINT(IBSS
),
5076 CHECK_AND_PRINT(ACTIVE
),
5077 CHECK_AND_PRINT(RADAR
),
5078 CHECK_AND_PRINT(WIDE
),
5079 CHECK_AND_PRINT(NARROW
),
5080 CHECK_AND_PRINT(DFS
),
5081 eeprom_ch_info
[ch
].flags
,
5082 eeprom_ch_info
[ch
].max_power_avg
,
5083 ((eeprom_ch_info
[ch
].
5084 flags
& EEPROM_CHANNEL_IBSS
)
5085 && !(eeprom_ch_info
[ch
].
5086 flags
& EEPROM_CHANNEL_RADAR
))
5089 /* Set the user_txpower_limit to the highest power
5090 * supported by any channel */
5091 if (eeprom_ch_info
[ch
].max_power_avg
>
5092 priv
->user_txpower_limit
)
5093 priv
->user_txpower_limit
=
5094 eeprom_ch_info
[ch
].max_power_avg
;
5100 if (iwl3945_txpower_set_from_eeprom(priv
))
5106 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
5107 * sending probe req. This should be set long enough to hear probe responses
5108 * from more than one AP. */
5109 #define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
5110 #define IWL_ACTIVE_DWELL_TIME_52 (10)
5112 /* For faster active scanning, scan will move to the next channel if fewer than
5113 * PLCP_QUIET_THRESH packets are heard on this channel within
5114 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
5115 * time if it's a quiet channel (nothing responded to our probe, and there's
5116 * no other traffic).
5117 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
5118 #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
5119 #define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
5121 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
5122 * Must be set longer than active dwell time.
5123 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
5124 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
5125 #define IWL_PASSIVE_DWELL_TIME_52 (10)
5126 #define IWL_PASSIVE_DWELL_BASE (100)
5127 #define IWL_CHANNEL_TUNE_TIME 5
5129 static inline u16
iwl_get_active_dwell_time(struct iwl_priv
*priv
, int phymode
)
5131 if (phymode
== MODE_IEEE80211A
)
5132 return IWL_ACTIVE_DWELL_TIME_52
;
5134 return IWL_ACTIVE_DWELL_TIME_24
;
5137 static u16
iwl_get_passive_dwell_time(struct iwl_priv
*priv
, int phymode
)
5139 u16 active
= iwl_get_active_dwell_time(priv
, phymode
);
5140 u16 passive
= (phymode
!= MODE_IEEE80211A
) ?
5141 IWL_PASSIVE_DWELL_BASE
+ IWL_PASSIVE_DWELL_TIME_24
:
5142 IWL_PASSIVE_DWELL_BASE
+ IWL_PASSIVE_DWELL_TIME_52
;
5144 if (iwl_is_associated(priv
)) {
5145 /* If we're associated, we clamp the maximum passive
5146 * dwell time to be 98% of the beacon interval (minus
5147 * 2 * channel tune time) */
5148 passive
= priv
->beacon_int
;
5149 if ((passive
> IWL_PASSIVE_DWELL_BASE
) || !passive
)
5150 passive
= IWL_PASSIVE_DWELL_BASE
;
5151 passive
= (passive
* 98) / 100 - IWL_CHANNEL_TUNE_TIME
* 2;
5154 if (passive
<= active
)
5155 passive
= active
+ 1;
5160 static int iwl_get_channels_for_scan(struct iwl_priv
*priv
, int phymode
,
5161 u8 is_active
, u8 direct_mask
,
5162 struct iwl_scan_channel
*scan_ch
)
5164 const struct ieee80211_channel
*channels
= NULL
;
5165 const struct ieee80211_hw_mode
*hw_mode
;
5166 const struct iwl_channel_info
*ch_info
;
5167 u16 passive_dwell
= 0;
5168 u16 active_dwell
= 0;
5171 hw_mode
= iwl_get_hw_mode(priv
, phymode
);
5175 channels
= hw_mode
->channels
;
5177 active_dwell
= iwl_get_active_dwell_time(priv
, phymode
);
5178 passive_dwell
= iwl_get_passive_dwell_time(priv
, phymode
);
5180 for (i
= 0, added
= 0; i
< hw_mode
->num_channels
; i
++) {
5181 if (channels
[i
].chan
==
5182 le16_to_cpu(priv
->active_rxon
.channel
)) {
5183 if (iwl_is_associated(priv
)) {
5185 ("Skipping current channel %d\n",
5186 le16_to_cpu(priv
->active_rxon
.channel
));
5189 } else if (priv
->only_active_channel
)
5192 scan_ch
->channel
= channels
[i
].chan
;
5194 ch_info
= iwl_get_channel_info(priv
, phymode
, scan_ch
->channel
);
5195 if (!is_channel_valid(ch_info
)) {
5196 IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
5201 if (!is_active
|| is_channel_passive(ch_info
) ||
5202 !(channels
[i
].flag
& IEEE80211_CHAN_W_ACTIVE_SCAN
))
5203 scan_ch
->type
= 0; /* passive */
5205 scan_ch
->type
= 1; /* active */
5207 if (scan_ch
->type
& 1)
5208 scan_ch
->type
|= (direct_mask
<< 1);
5210 if (is_channel_narrow(ch_info
))
5211 scan_ch
->type
|= (1 << 7);
5213 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
5214 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
5216 /* Set power levels to defaults */
5217 scan_ch
->tpc
.dsp_atten
= 110;
5218 /* scan_pwr_info->tpc.dsp_atten; */
5220 /*scan_pwr_info->tpc.tx_gain; */
5221 if (phymode
== MODE_IEEE80211A
)
5222 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (3 << 3)) | 3;
5224 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (5 << 3));
5225 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
5227 scan_ch->tpc.tx_gain = ((1<<5) | (2 << 3)) | 3;
5231 IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
5233 (scan_ch
->type
& 1) ? "ACTIVE" : "PASSIVE",
5234 (scan_ch
->type
& 1) ?
5235 active_dwell
: passive_dwell
);
5241 IWL_DEBUG_SCAN("total channels to scan %d \n", added
);
5245 static void iwl_reset_channel_flag(struct iwl_priv
*priv
)
5248 for (i
= 0; i
< 3; i
++) {
5249 struct ieee80211_hw_mode
*hw_mode
= (void *)&priv
->modes
[i
];
5250 for (j
= 0; j
< hw_mode
->num_channels
; j
++)
5251 hw_mode
->channels
[j
].flag
= hw_mode
->channels
[j
].val
;
5255 static void iwl_init_hw_rates(struct iwl_priv
*priv
,
5256 struct ieee80211_rate
*rates
)
5260 for (i
= 0; i
< IWL_RATE_COUNT
; i
++) {
5261 rates
[i
].rate
= iwl_rates
[i
].ieee
* 5;
5262 rates
[i
].val
= i
; /* Rate scaling will work on indexes */
5264 rates
[i
].flags
= IEEE80211_RATE_SUPPORTED
;
5265 /* Only OFDM have the bits-per-symbol set */
5266 if ((i
<= IWL_LAST_OFDM_RATE
) && (i
>= IWL_FIRST_OFDM_RATE
))
5267 rates
[i
].flags
|= IEEE80211_RATE_OFDM
;
5270 * If CCK 1M then set rate flag to CCK else CCK_2
5271 * which is CCK | PREAMBLE2
5273 rates
[i
].flags
|= (iwl_rates
[i
].plcp
== 10) ?
5274 IEEE80211_RATE_CCK
: IEEE80211_RATE_CCK_2
;
5277 /* Set up which ones are basic rates... */
5278 if (IWL_BASIC_RATES_MASK
& (1 << i
))
5279 rates
[i
].flags
|= IEEE80211_RATE_BASIC
;
5284 * iwl_init_geos - Initialize mac80211's geo/channel info based from eeprom
5286 static int iwl_init_geos(struct iwl_priv
*priv
)
5288 struct iwl_channel_info
*ch
;
5289 struct ieee80211_hw_mode
*modes
;
5290 struct ieee80211_channel
*channels
;
5291 struct ieee80211_channel
*geo_ch
;
5292 struct ieee80211_rate
*rates
;
5302 IWL_DEBUG_INFO("Geography modes already initialized.\n");
5303 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
5307 modes
= kzalloc(sizeof(struct ieee80211_hw_mode
) * mode_count
,
5312 channels
= kzalloc(sizeof(struct ieee80211_channel
) *
5313 priv
->channel_count
, GFP_KERNEL
);
5319 rates
= kzalloc((sizeof(struct ieee80211_rate
) * (IWL_MAX_RATES
+ 1)),
5332 /* 5.2GHz channels start after the 2.4GHz channels */
5333 modes
[A
].mode
= MODE_IEEE80211A
;
5334 modes
[A
].channels
= &channels
[ARRAY_SIZE(iwl_eeprom_band_1
)];
5335 modes
[A
].rates
= &rates
[4];
5336 modes
[A
].num_rates
= 8; /* just OFDM */
5337 modes
[A
].num_channels
= 0;
5339 modes
[B
].mode
= MODE_IEEE80211B
;
5340 modes
[B
].channels
= channels
;
5341 modes
[B
].rates
= rates
;
5342 modes
[B
].num_rates
= 4; /* just CCK */
5343 modes
[B
].num_channels
= 0;
5345 modes
[G
].mode
= MODE_IEEE80211G
;
5346 modes
[G
].channels
= channels
;
5347 modes
[G
].rates
= rates
;
5348 modes
[G
].num_rates
= 12; /* OFDM & CCK */
5349 modes
[G
].num_channels
= 0;
5351 priv
->ieee_channels
= channels
;
5352 priv
->ieee_rates
= rates
;
5354 iwl_init_hw_rates(priv
, rates
);
5356 for (i
= 0, geo_ch
= channels
; i
< priv
->channel_count
; i
++) {
5357 ch
= &priv
->channel_info
[i
];
5359 if (!is_channel_valid(ch
)) {
5360 IWL_DEBUG_INFO("Channel %d [%sGHz] is restricted -- "
5362 ch
->channel
, is_channel_a_band(ch
) ?
5367 if (is_channel_a_band(ch
))
5368 geo_ch
= &modes
[A
].channels
[modes
[A
].num_channels
++];
5370 geo_ch
= &modes
[B
].channels
[modes
[B
].num_channels
++];
5371 modes
[G
].num_channels
++;
5374 geo_ch
->freq
= ieee80211chan2mhz(ch
->channel
);
5375 geo_ch
->chan
= ch
->channel
;
5376 geo_ch
->power_level
= ch
->max_power_avg
;
5377 geo_ch
->antenna_max
= 0xff;
5379 if (is_channel_valid(ch
)) {
5380 geo_ch
->flag
= IEEE80211_CHAN_W_SCAN
;
5381 if (ch
->flags
& EEPROM_CHANNEL_IBSS
)
5382 geo_ch
->flag
|= IEEE80211_CHAN_W_IBSS
;
5384 if (ch
->flags
& EEPROM_CHANNEL_ACTIVE
)
5385 geo_ch
->flag
|= IEEE80211_CHAN_W_ACTIVE_SCAN
;
5387 if (ch
->flags
& EEPROM_CHANNEL_RADAR
)
5388 geo_ch
->flag
|= IEEE80211_CHAN_W_RADAR_DETECT
;
5390 if (ch
->max_power_avg
> priv
->max_channel_txpower_limit
)
5391 priv
->max_channel_txpower_limit
=
5395 geo_ch
->val
= geo_ch
->flag
;
5398 if ((modes
[A
].num_channels
== 0) && priv
->is_abg
) {
5399 printk(KERN_INFO DRV_NAME
5400 ": Incorrectly detected BG card as ABG. Please send "
5401 "your PCI ID 0x%04X:0x%04X to maintainer.\n",
5402 priv
->pci_dev
->device
, priv
->pci_dev
->subsystem_device
);
5406 printk(KERN_INFO DRV_NAME
5407 ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
5408 modes
[G
].num_channels
, modes
[A
].num_channels
);
5411 * NOTE: We register these in preference of order -- the
5412 * stack doesn't currently (as of 7.0.6 / Apr 24 '07) pick
5413 * a phymode based on rates or AP capabilities but seems to
5414 * configure it purely on if the channel being configured
5415 * is supported by a mode -- and the first match is taken
5418 if (modes
[G
].num_channels
)
5419 ieee80211_register_hwmode(priv
->hw
, &modes
[G
]);
5420 if (modes
[B
].num_channels
)
5421 ieee80211_register_hwmode(priv
->hw
, &modes
[B
]);
5422 if (modes
[A
].num_channels
)
5423 ieee80211_register_hwmode(priv
->hw
, &modes
[A
]);
5425 priv
->modes
= modes
;
5426 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
5431 /******************************************************************************
5433 * uCode download functions
5435 ******************************************************************************/
5437 static void iwl_dealloc_ucode_pci(struct iwl_priv
*priv
)
5439 if (priv
->ucode_code
.v_addr
!= NULL
) {
5440 pci_free_consistent(priv
->pci_dev
,
5441 priv
->ucode_code
.len
,
5442 priv
->ucode_code
.v_addr
,
5443 priv
->ucode_code
.p_addr
);
5444 priv
->ucode_code
.v_addr
= NULL
;
5446 if (priv
->ucode_data
.v_addr
!= NULL
) {
5447 pci_free_consistent(priv
->pci_dev
,
5448 priv
->ucode_data
.len
,
5449 priv
->ucode_data
.v_addr
,
5450 priv
->ucode_data
.p_addr
);
5451 priv
->ucode_data
.v_addr
= NULL
;
5453 if (priv
->ucode_data_backup
.v_addr
!= NULL
) {
5454 pci_free_consistent(priv
->pci_dev
,
5455 priv
->ucode_data_backup
.len
,
5456 priv
->ucode_data_backup
.v_addr
,
5457 priv
->ucode_data_backup
.p_addr
);
5458 priv
->ucode_data_backup
.v_addr
= NULL
;
5460 if (priv
->ucode_init
.v_addr
!= NULL
) {
5461 pci_free_consistent(priv
->pci_dev
,
5462 priv
->ucode_init
.len
,
5463 priv
->ucode_init
.v_addr
,
5464 priv
->ucode_init
.p_addr
);
5465 priv
->ucode_init
.v_addr
= NULL
;
5467 if (priv
->ucode_init_data
.v_addr
!= NULL
) {
5468 pci_free_consistent(priv
->pci_dev
,
5469 priv
->ucode_init_data
.len
,
5470 priv
->ucode_init_data
.v_addr
,
5471 priv
->ucode_init_data
.p_addr
);
5472 priv
->ucode_init_data
.v_addr
= NULL
;
5474 if (priv
->ucode_boot
.v_addr
!= NULL
) {
5475 pci_free_consistent(priv
->pci_dev
,
5476 priv
->ucode_boot
.len
,
5477 priv
->ucode_boot
.v_addr
,
5478 priv
->ucode_boot
.p_addr
);
5479 priv
->ucode_boot
.v_addr
= NULL
;
5484 * iwl_verify_inst_full - verify runtime uCode image in card vs. host,
5485 * looking at all data.
5487 static int iwl_verify_inst_full(struct iwl_priv
*priv
, __le32
* image
, u32 len
)
5494 IWL_DEBUG_INFO("ucode inst image size is %u\n", len
);
5496 rc
= iwl_grab_restricted_access(priv
);
5500 iwl_write_restricted(priv
, HBUS_TARG_MEM_RADDR
, RTC_INST_LOWER_BOUND
);
5503 for (; len
> 0; len
-= sizeof(u32
), image
++) {
5504 /* read data comes through single port, auto-incr addr */
5505 /* NOTE: Use the debugless read so we don't flood kernel log
5506 * if IWL_DL_IO is set */
5507 val
= _iwl_read_restricted(priv
, HBUS_TARG_MEM_RDAT
);
5508 if (val
!= le32_to_cpu(*image
)) {
5509 IWL_ERROR("uCode INST section is invalid at "
5510 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5511 save_len
- len
, val
, le32_to_cpu(*image
));
5519 iwl_release_restricted_access(priv
);
5523 ("ucode image in INSTRUCTION memory is good\n");
5530 * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
5531 * using sample data 100 bytes apart. If these sample points are good,
5532 * it's a pretty good bet that everything between them is good, too.
5534 static int iwl_verify_inst_sparse(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
5541 IWL_DEBUG_INFO("ucode inst image size is %u\n", len
);
5543 rc
= iwl_grab_restricted_access(priv
);
5547 for (i
= 0; i
< len
; i
+= 100, image
+= 100/sizeof(u32
)) {
5548 /* read data comes through single port, auto-incr addr */
5549 /* NOTE: Use the debugless read so we don't flood kernel log
5550 * if IWL_DL_IO is set */
5551 iwl_write_restricted(priv
, HBUS_TARG_MEM_RADDR
,
5552 i
+ RTC_INST_LOWER_BOUND
);
5553 val
= _iwl_read_restricted(priv
, HBUS_TARG_MEM_RDAT
);
5554 if (val
!= le32_to_cpu(*image
)) {
5555 #if 0 /* Enable this if you want to see details */
5556 IWL_ERROR("uCode INST section is invalid at "
5557 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5567 iwl_release_restricted_access(priv
);
5574 * iwl_verify_ucode - determine which instruction image is in SRAM,
5575 * and verify its contents
5577 static int iwl_verify_ucode(struct iwl_priv
*priv
)
5584 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
5585 len
= priv
->ucode_boot
.len
;
5586 rc
= iwl_verify_inst_sparse(priv
, image
, len
);
5588 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
5592 /* Try initialize */
5593 image
= (__le32
*)priv
->ucode_init
.v_addr
;
5594 len
= priv
->ucode_init
.len
;
5595 rc
= iwl_verify_inst_sparse(priv
, image
, len
);
5597 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
5601 /* Try runtime/protocol */
5602 image
= (__le32
*)priv
->ucode_code
.v_addr
;
5603 len
= priv
->ucode_code
.len
;
5604 rc
= iwl_verify_inst_sparse(priv
, image
, len
);
5606 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
5610 IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
5612 /* Show first several data entries in instruction SRAM.
5613 * Selection of bootstrap image is arbitrary. */
5614 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
5615 len
= priv
->ucode_boot
.len
;
5616 rc
= iwl_verify_inst_full(priv
, image
, len
);
5622 /* check contents of special bootstrap uCode SRAM */
5623 static int iwl_verify_bsm(struct iwl_priv
*priv
)
5625 __le32
*image
= priv
->ucode_boot
.v_addr
;
5626 u32 len
= priv
->ucode_boot
.len
;
5630 IWL_DEBUG_INFO("Begin verify bsm\n");
5632 /* verify BSM SRAM contents */
5633 val
= iwl_read_restricted_reg(priv
, BSM_WR_DWCOUNT_REG
);
5634 for (reg
= BSM_SRAM_LOWER_BOUND
;
5635 reg
< BSM_SRAM_LOWER_BOUND
+ len
;
5636 reg
+= sizeof(u32
), image
++) {
5637 val
= iwl_read_restricted_reg(priv
, reg
);
5638 if (val
!= le32_to_cpu(*image
)) {
5639 IWL_ERROR("BSM uCode verification failed at "
5640 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
5641 BSM_SRAM_LOWER_BOUND
,
5642 reg
- BSM_SRAM_LOWER_BOUND
, len
,
5643 val
, le32_to_cpu(*image
));
5648 IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
5654 * iwl_load_bsm - Load bootstrap instructions
5658 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
5659 * in special SRAM that does not power down during RFKILL. When powering back
5660 * up after power-saving sleeps (or during initial uCode load), the BSM loads
5661 * the bootstrap program into the on-board processor, and starts it.
5663 * The bootstrap program loads (via DMA) instructions and data for a new
5664 * program from host DRAM locations indicated by the host driver in the
5665 * BSM_DRAM_* registers. Once the new program is loaded, it starts
5668 * When initializing the NIC, the host driver points the BSM to the
5669 * "initialize" uCode image. This uCode sets up some internal data, then
5670 * notifies host via "initialize alive" that it is complete.
5672 * The host then replaces the BSM_DRAM_* pointer values to point to the
5673 * normal runtime uCode instructions and a backup uCode data cache buffer
5674 * (filled initially with starting data values for the on-board processor),
5675 * then triggers the "initialize" uCode to load and launch the runtime uCode,
5676 * which begins normal operation.
5678 * When doing a power-save shutdown, runtime uCode saves data SRAM into
5679 * the backup data cache in DRAM before SRAM is powered down.
5681 * When powering back up, the BSM loads the bootstrap program. This reloads
5682 * the runtime uCode instructions and the backup data cache into SRAM,
5683 * and re-launches the runtime uCode from where it left off.
5685 static int iwl_load_bsm(struct iwl_priv
*priv
)
5687 __le32
*image
= priv
->ucode_boot
.v_addr
;
5688 u32 len
= priv
->ucode_boot
.len
;
5698 IWL_DEBUG_INFO("Begin load bsm\n");
5700 /* make sure bootstrap program is no larger than BSM's SRAM size */
5701 if (len
> IWL_MAX_BSM_SIZE
)
5704 /* Tell bootstrap uCode where to find the "Initialize" uCode
5705 * in host DRAM ... bits 31:0 for 3945, bits 35:4 for 4965.
5706 * NOTE: iwl_initialize_alive_start() will replace these values,
5707 * after the "initialize" uCode has run, to point to
5708 * runtime/protocol instructions and backup data cache. */
5709 pinst
= priv
->ucode_init
.p_addr
;
5710 pdata
= priv
->ucode_init_data
.p_addr
;
5711 inst_len
= priv
->ucode_init
.len
;
5712 data_len
= priv
->ucode_init_data
.len
;
5714 rc
= iwl_grab_restricted_access(priv
);
5718 iwl_write_restricted_reg(priv
, BSM_DRAM_INST_PTR_REG
, pinst
);
5719 iwl_write_restricted_reg(priv
, BSM_DRAM_DATA_PTR_REG
, pdata
);
5720 iwl_write_restricted_reg(priv
, BSM_DRAM_INST_BYTECOUNT_REG
, inst_len
);
5721 iwl_write_restricted_reg(priv
, BSM_DRAM_DATA_BYTECOUNT_REG
, data_len
);
5723 /* Fill BSM memory with bootstrap instructions */
5724 for (reg_offset
= BSM_SRAM_LOWER_BOUND
;
5725 reg_offset
< BSM_SRAM_LOWER_BOUND
+ len
;
5726 reg_offset
+= sizeof(u32
), image
++)
5727 _iwl_write_restricted_reg(priv
, reg_offset
,
5728 le32_to_cpu(*image
));
5730 rc
= iwl_verify_bsm(priv
);
5732 iwl_release_restricted_access(priv
);
5736 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
5737 iwl_write_restricted_reg(priv
, BSM_WR_MEM_SRC_REG
, 0x0);
5738 iwl_write_restricted_reg(priv
, BSM_WR_MEM_DST_REG
,
5739 RTC_INST_LOWER_BOUND
);
5740 iwl_write_restricted_reg(priv
, BSM_WR_DWCOUNT_REG
, len
/ sizeof(u32
));
5742 /* Load bootstrap code into instruction SRAM now,
5743 * to prepare to load "initialize" uCode */
5744 iwl_write_restricted_reg(priv
, BSM_WR_CTRL_REG
,
5745 BSM_WR_CTRL_REG_BIT_START
);
5747 /* Wait for load of bootstrap uCode to finish */
5748 for (i
= 0; i
< 100; i
++) {
5749 done
= iwl_read_restricted_reg(priv
, BSM_WR_CTRL_REG
);
5750 if (!(done
& BSM_WR_CTRL_REG_BIT_START
))
5755 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i
);
5757 IWL_ERROR("BSM write did not complete!\n");
5761 /* Enable future boot loads whenever power management unit triggers it
5762 * (e.g. when powering back up after power-save shutdown) */
5763 iwl_write_restricted_reg(priv
, BSM_WR_CTRL_REG
,
5764 BSM_WR_CTRL_REG_BIT_START_EN
);
5766 iwl_release_restricted_access(priv
);
5771 static void iwl_nic_start(struct iwl_priv
*priv
)
5773 /* Remove all resets to allow NIC to operate */
5774 iwl_write32(priv
, CSR_RESET
, 0);
5778 * iwl_read_ucode - Read uCode images from disk file.
5780 * Copy into buffers for card to fetch via bus-mastering
5782 static int iwl_read_ucode(struct iwl_priv
*priv
)
5784 struct iwl_ucode
*ucode
;
5786 const struct firmware
*ucode_raw
;
5787 /* firmware file name contains uCode/driver compatibility version */
5788 const char *name
= "iwlwifi-3945" IWL3945_UCODE_API
".ucode";
5791 u32 ver
, inst_size
, data_size
, init_size
, init_data_size
, boot_size
;
5793 /* Ask kernel firmware_class module to get the boot firmware off disk.
5794 * request_firmware() is synchronous, file is in memory on return. */
5795 rc
= request_firmware(&ucode_raw
, name
, &priv
->pci_dev
->dev
);
5797 IWL_ERROR("%s firmware file req failed: Reason %d\n", name
, rc
);
5801 IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
5802 name
, ucode_raw
->size
);
5804 /* Make sure that we got at least our header! */
5805 if (ucode_raw
->size
< sizeof(*ucode
)) {
5806 IWL_ERROR("File size way too small!\n");
5811 /* Data from ucode file: header followed by uCode images */
5812 ucode
= (void *)ucode_raw
->data
;
5814 ver
= le32_to_cpu(ucode
->ver
);
5815 inst_size
= le32_to_cpu(ucode
->inst_size
);
5816 data_size
= le32_to_cpu(ucode
->data_size
);
5817 init_size
= le32_to_cpu(ucode
->init_size
);
5818 init_data_size
= le32_to_cpu(ucode
->init_data_size
);
5819 boot_size
= le32_to_cpu(ucode
->boot_size
);
5821 IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver
);
5822 IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n",
5824 IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n",
5826 IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n",
5828 IWL_DEBUG_INFO("f/w package hdr init data size = %u\n",
5830 IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n",
5833 /* Verify size of file vs. image size info in file's header */
5834 if (ucode_raw
->size
< sizeof(*ucode
) +
5835 inst_size
+ data_size
+ init_size
+
5836 init_data_size
+ boot_size
) {
5838 IWL_DEBUG_INFO("uCode file size %d too small\n",
5839 (int)ucode_raw
->size
);
5844 /* Verify that uCode images will fit in card's SRAM */
5845 if (inst_size
> IWL_MAX_INST_SIZE
) {
5846 IWL_DEBUG_INFO("uCode instr len %d too large to fit in card\n",
5852 if (data_size
> IWL_MAX_DATA_SIZE
) {
5853 IWL_DEBUG_INFO("uCode data len %d too large to fit in card\n",
5858 if (init_size
> IWL_MAX_INST_SIZE
) {
5860 ("uCode init instr len %d too large to fit in card\n",
5865 if (init_data_size
> IWL_MAX_DATA_SIZE
) {
5867 ("uCode init data len %d too large to fit in card\n",
5868 (int)init_data_size
);
5872 if (boot_size
> IWL_MAX_BSM_SIZE
) {
5874 ("uCode boot instr len %d too large to fit in bsm\n",
5880 /* Allocate ucode buffers for card's bus-master loading ... */
5882 /* Runtime instructions and 2 copies of data:
5883 * 1) unmodified from disk
5884 * 2) backup cache for save/restore during power-downs */
5885 priv
->ucode_code
.len
= inst_size
;
5886 priv
->ucode_code
.v_addr
=
5887 pci_alloc_consistent(priv
->pci_dev
,
5888 priv
->ucode_code
.len
,
5889 &(priv
->ucode_code
.p_addr
));
5891 priv
->ucode_data
.len
= data_size
;
5892 priv
->ucode_data
.v_addr
=
5893 pci_alloc_consistent(priv
->pci_dev
,
5894 priv
->ucode_data
.len
,
5895 &(priv
->ucode_data
.p_addr
));
5897 priv
->ucode_data_backup
.len
= data_size
;
5898 priv
->ucode_data_backup
.v_addr
=
5899 pci_alloc_consistent(priv
->pci_dev
,
5900 priv
->ucode_data_backup
.len
,
5901 &(priv
->ucode_data_backup
.p_addr
));
5904 /* Initialization instructions and data */
5905 priv
->ucode_init
.len
= init_size
;
5906 priv
->ucode_init
.v_addr
=
5907 pci_alloc_consistent(priv
->pci_dev
,
5908 priv
->ucode_init
.len
,
5909 &(priv
->ucode_init
.p_addr
));
5911 priv
->ucode_init_data
.len
= init_data_size
;
5912 priv
->ucode_init_data
.v_addr
=
5913 pci_alloc_consistent(priv
->pci_dev
,
5914 priv
->ucode_init_data
.len
,
5915 &(priv
->ucode_init_data
.p_addr
));
5917 /* Bootstrap (instructions only, no data) */
5918 priv
->ucode_boot
.len
= boot_size
;
5919 priv
->ucode_boot
.v_addr
=
5920 pci_alloc_consistent(priv
->pci_dev
,
5921 priv
->ucode_boot
.len
,
5922 &(priv
->ucode_boot
.p_addr
));
5924 if (!priv
->ucode_code
.v_addr
|| !priv
->ucode_data
.v_addr
||
5925 !priv
->ucode_init
.v_addr
|| !priv
->ucode_init_data
.v_addr
||
5926 !priv
->ucode_boot
.v_addr
|| !priv
->ucode_data_backup
.v_addr
)
5929 /* Copy images into buffers for card's bus-master reads ... */
5931 /* Runtime instructions (first block of data in file) */
5932 src
= &ucode
->data
[0];
5933 len
= priv
->ucode_code
.len
;
5934 IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %d\n",
5936 memcpy(priv
->ucode_code
.v_addr
, src
, len
);
5937 IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
5938 priv
->ucode_code
.v_addr
, (u32
)priv
->ucode_code
.p_addr
);
5940 /* Runtime data (2nd block)
5941 * NOTE: Copy into backup buffer will be done in iwl_up() */
5942 src
= &ucode
->data
[inst_size
];
5943 len
= priv
->ucode_data
.len
;
5944 IWL_DEBUG_INFO("Copying (but not loading) uCode data len %d\n",
5946 memcpy(priv
->ucode_data
.v_addr
, src
, len
);
5947 memcpy(priv
->ucode_data_backup
.v_addr
, src
, len
);
5949 /* Initialization instructions (3rd block) */
5951 src
= &ucode
->data
[inst_size
+ data_size
];
5952 len
= priv
->ucode_init
.len
;
5953 IWL_DEBUG_INFO("Copying (but not loading) init instr len %d\n",
5955 memcpy(priv
->ucode_init
.v_addr
, src
, len
);
5958 /* Initialization data (4th block) */
5959 if (init_data_size
) {
5960 src
= &ucode
->data
[inst_size
+ data_size
+ init_size
];
5961 len
= priv
->ucode_init_data
.len
;
5962 IWL_DEBUG_INFO("Copying (but not loading) init data len %d\n",
5964 memcpy(priv
->ucode_init_data
.v_addr
, src
, len
);
5967 /* Bootstrap instructions (5th block) */
5968 src
= &ucode
->data
[inst_size
+ data_size
+ init_size
+ init_data_size
];
5969 len
= priv
->ucode_boot
.len
;
5970 IWL_DEBUG_INFO("Copying (but not loading) boot instr len %d\n",
5972 memcpy(priv
->ucode_boot
.v_addr
, src
, len
);
5974 /* We have our copies now, allow OS release its copies */
5975 release_firmware(ucode_raw
);
5979 IWL_ERROR("failed to allocate pci memory\n");
5981 iwl_dealloc_ucode_pci(priv
);
5984 release_firmware(ucode_raw
);
5992 * iwl_set_ucode_ptrs - Set uCode address location
5994 * Tell initialization uCode where to find runtime uCode.
5996 * BSM registers initially contain pointers to initialization uCode.
5997 * We need to replace them to load runtime uCode inst and data,
5998 * and to save runtime data when powering down.
6000 static int iwl_set_ucode_ptrs(struct iwl_priv
*priv
)
6005 unsigned long flags
;
6007 /* bits 31:0 for 3945 */
6008 pinst
= priv
->ucode_code
.p_addr
;
6009 pdata
= priv
->ucode_data_backup
.p_addr
;
6011 spin_lock_irqsave(&priv
->lock
, flags
);
6012 rc
= iwl_grab_restricted_access(priv
);
6014 spin_unlock_irqrestore(&priv
->lock
, flags
);
6018 /* Tell bootstrap uCode where to find image to load */
6019 iwl_write_restricted_reg(priv
, BSM_DRAM_INST_PTR_REG
, pinst
);
6020 iwl_write_restricted_reg(priv
, BSM_DRAM_DATA_PTR_REG
, pdata
);
6021 iwl_write_restricted_reg(priv
, BSM_DRAM_DATA_BYTECOUNT_REG
,
6022 priv
->ucode_data
.len
);
6024 /* Inst bytecount must be last to set up, bit 31 signals uCode
6025 * that all new ptr/size info is in place */
6026 iwl_write_restricted_reg(priv
, BSM_DRAM_INST_BYTECOUNT_REG
,
6027 priv
->ucode_code
.len
| BSM_DRAM_INST_LOAD
);
6029 iwl_release_restricted_access(priv
);
6031 spin_unlock_irqrestore(&priv
->lock
, flags
);
6033 IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
6039 * iwl_init_alive_start - Called after REPLY_ALIVE notification receieved
6041 * Called after REPLY_ALIVE notification received from "initialize" uCode.
6043 * The 4965 "initialize" ALIVE reply contains calibration data for:
6044 * Voltage, temperature, and MIMO tx gain correction, now stored in priv
6045 * (3945 does not contain this data).
6047 * Tell "initialize" uCode to go ahead and load the runtime uCode.
6049 static void iwl_init_alive_start(struct iwl_priv
*priv
)
6051 /* Check alive response for "valid" sign from uCode */
6052 if (priv
->card_alive_init
.is_valid
!= UCODE_VALID_OK
) {
6053 /* We had an error bringing up the hardware, so take it
6054 * all the way back down so we can try again */
6055 IWL_DEBUG_INFO("Initialize Alive failed.\n");
6059 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
6060 * This is a paranoid check, because we would not have gotten the
6061 * "initialize" alive if code weren't properly loaded. */
6062 if (iwl_verify_ucode(priv
)) {
6063 /* Runtime instruction load was bad;
6064 * take it all the way back down so we can try again */
6065 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
6069 /* Send pointers to protocol/runtime uCode image ... init code will
6070 * load and launch runtime uCode, which will send us another "Alive"
6072 IWL_DEBUG_INFO("Initialization Alive received.\n");
6073 if (iwl_set_ucode_ptrs(priv
)) {
6074 /* Runtime instruction load won't happen;
6075 * take it all the way back down so we can try again */
6076 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
6082 queue_work(priv
->workqueue
, &priv
->restart
);
6087 * iwl_alive_start - called after REPLY_ALIVE notification received
6088 * from protocol/runtime uCode (initialization uCode's
6089 * Alive gets handled by iwl_init_alive_start()).
6091 static void iwl_alive_start(struct iwl_priv
*priv
)
6094 int thermal_spin
= 0;
6097 IWL_DEBUG_INFO("Runtime Alive received.\n");
6099 if (priv
->card_alive
.is_valid
!= UCODE_VALID_OK
) {
6100 /* We had an error bringing up the hardware, so take it
6101 * all the way back down so we can try again */
6102 IWL_DEBUG_INFO("Alive failed.\n");
6106 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
6107 * This is a paranoid check, because we would not have gotten the
6108 * "runtime" alive if code weren't properly loaded. */
6109 if (iwl_verify_ucode(priv
)) {
6110 /* Runtime instruction load was bad;
6111 * take it all the way back down so we can try again */
6112 IWL_DEBUG_INFO("Bad runtime uCode load.\n");
6116 iwl_clear_stations_table(priv
);
6118 rc
= iwl_grab_restricted_access(priv
);
6120 IWL_WARNING("Can not read rfkill status from adapter\n");
6124 rfkill
= iwl_read_restricted_reg(priv
, APMG_RFKILL_REG
);
6125 IWL_DEBUG_INFO("RFKILL status: 0x%x\n", rfkill
);
6126 iwl_release_restricted_access(priv
);
6129 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
6130 /* if rfkill is not on, then wait for thermal
6131 * sensor in adapter to kick in */
6132 while (iwl_hw_get_temperature(priv
) == 0) {
6138 IWL_DEBUG_INFO("Thermal calibration took %dus\n",
6141 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
6143 /* After the ALIVE response, we can process host commands */
6144 set_bit(STATUS_ALIVE
, &priv
->status
);
6146 /* Clear out the uCode error bit if it is set */
6147 clear_bit(STATUS_FW_ERROR
, &priv
->status
);
6149 rc
= iwl_init_channel_map(priv
);
6151 IWL_ERROR("initializing regulatory failed: %d\n", rc
);
6155 iwl_init_geos(priv
);
6157 if (iwl_is_rfkill(priv
))
6160 if (!priv
->mac80211_registered
) {
6161 /* Unlock so any user space entry points can call back into
6162 * the driver without a deadlock... */
6163 mutex_unlock(&priv
->mutex
);
6164 iwl_rate_control_register(priv
->hw
);
6165 rc
= ieee80211_register_hw(priv
->hw
);
6166 priv
->hw
->conf
.beacon_int
= 100;
6167 mutex_lock(&priv
->mutex
);
6170 IWL_ERROR("Failed to register network "
6171 "device (error %d)\n", rc
);
6175 priv
->mac80211_registered
= 1;
6177 iwl_reset_channel_flag(priv
);
6179 ieee80211_start_queues(priv
->hw
);
6181 priv
->active_rate
= priv
->rates_mask
;
6182 priv
->active_rate_basic
= priv
->rates_mask
& IWL_BASIC_RATES_MASK
;
6184 iwl_send_power_mode(priv
, IWL_POWER_LEVEL(priv
->power_mode
));
6186 if (iwl_is_associated(priv
)) {
6187 struct iwl_rxon_cmd
*active_rxon
=
6188 (struct iwl_rxon_cmd
*)(&priv
->active_rxon
);
6190 memcpy(&priv
->staging_rxon
, &priv
->active_rxon
,
6191 sizeof(priv
->staging_rxon
));
6192 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
6194 /* Initialize our rx_config data */
6195 iwl_connection_init_rx_config(priv
);
6196 memcpy(priv
->staging_rxon
.node_addr
, priv
->mac_addr
, ETH_ALEN
);
6199 /* Configure BT coexistence */
6200 iwl_send_bt_config(priv
);
6202 /* Configure the adapter for unassociated operation */
6203 iwl_commit_rxon(priv
);
6205 /* At this point, the NIC is initialized and operational */
6206 priv
->notif_missed_beacons
= 0;
6207 set_bit(STATUS_READY
, &priv
->status
);
6209 iwl3945_reg_txpower_periodic(priv
);
6211 IWL_DEBUG_INFO("ALIVE processing complete.\n");
6213 if (priv
->error_recovering
)
6214 iwl_error_recovery(priv
);
6219 queue_work(priv
->workqueue
, &priv
->restart
);
6222 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
);
6224 static void __iwl_down(struct iwl_priv
*priv
)
6226 unsigned long flags
;
6227 int exit_pending
= test_bit(STATUS_EXIT_PENDING
, &priv
->status
);
6228 struct ieee80211_conf
*conf
= NULL
;
6230 IWL_DEBUG_INFO(DRV_NAME
" is going down\n");
6232 conf
= ieee80211_get_hw_conf(priv
->hw
);
6235 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
6237 iwl_clear_stations_table(priv
);
6239 /* Unblock any waiting calls */
6240 wake_up_interruptible_all(&priv
->wait_command_queue
);
6242 iwl_cancel_deferred_work(priv
);
6244 /* Wipe out the EXIT_PENDING status bit if we are not actually
6245 * exiting the module */
6247 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
6249 /* stop and reset the on-board processor */
6250 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
6252 /* tell the device to stop sending interrupts */
6253 iwl_disable_interrupts(priv
);
6255 if (priv
->mac80211_registered
)
6256 ieee80211_stop_queues(priv
->hw
);
6258 /* If we have not previously called iwl_init() then
6259 * clear all bits but the RF Kill and SUSPEND bits and return */
6260 if (!iwl_is_init(priv
)) {
6261 priv
->status
= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
6263 test_bit(STATUS_RF_KILL_SW
, &priv
->status
) <<
6265 test_bit(STATUS_IN_SUSPEND
, &priv
->status
) <<
6270 /* ...otherwise clear out all the status bits but the RF Kill and
6271 * SUSPEND bits and continue taking the NIC down. */
6272 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
6274 test_bit(STATUS_RF_KILL_SW
, &priv
->status
) <<
6276 test_bit(STATUS_IN_SUSPEND
, &priv
->status
) <<
6278 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
6281 spin_lock_irqsave(&priv
->lock
, flags
);
6282 iwl_clear_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
6283 spin_unlock_irqrestore(&priv
->lock
, flags
);
6285 iwl_hw_txq_ctx_stop(priv
);
6286 iwl_hw_rxq_stop(priv
);
6288 spin_lock_irqsave(&priv
->lock
, flags
);
6289 if (!iwl_grab_restricted_access(priv
)) {
6290 iwl_write_restricted_reg(priv
, APMG_CLK_DIS_REG
,
6291 APMG_CLK_VAL_DMA_CLK_RQT
);
6292 iwl_release_restricted_access(priv
);
6294 spin_unlock_irqrestore(&priv
->lock
, flags
);
6298 iwl_hw_nic_stop_master(priv
);
6299 iwl_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_SW_RESET
);
6300 iwl_hw_nic_reset(priv
);
6303 memset(&priv
->card_alive
, 0, sizeof(struct iwl_alive_resp
));
6305 if (priv
->ibss_beacon
)
6306 dev_kfree_skb(priv
->ibss_beacon
);
6307 priv
->ibss_beacon
= NULL
;
6309 /* clear out any free frames */
6310 iwl_clear_free_frames(priv
);
6313 static void iwl_down(struct iwl_priv
*priv
)
6315 mutex_lock(&priv
->mutex
);
6317 mutex_unlock(&priv
->mutex
);
6320 #define MAX_HW_RESTARTS 5
6322 static int __iwl_up(struct iwl_priv
*priv
)
6324 DECLARE_MAC_BUF(mac
);
6327 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
6328 IWL_WARNING("Exit pending; will not bring the NIC up\n");
6332 if (test_bit(STATUS_RF_KILL_SW
, &priv
->status
)) {
6333 IWL_WARNING("Radio disabled by SW RF kill (module "
6338 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
6340 rc
= iwl_hw_nic_init(priv
);
6342 IWL_ERROR("Unable to int nic\n");
6346 /* make sure rfkill handshake bits are cleared */
6347 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
6348 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
6349 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
6351 /* clear (again), then enable host interrupts */
6352 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
6353 iwl_enable_interrupts(priv
);
6355 /* really make sure rfkill handshake bits are cleared */
6356 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
6357 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
6359 /* Copy original ucode data image from disk into backup cache.
6360 * This will be used to initialize the on-board processor's
6361 * data SRAM for a clean start when the runtime program first loads. */
6362 memcpy(priv
->ucode_data_backup
.v_addr
, priv
->ucode_data
.v_addr
,
6363 priv
->ucode_data
.len
);
6365 for (i
= 0; i
< MAX_HW_RESTARTS
; i
++) {
6367 iwl_clear_stations_table(priv
);
6369 /* load bootstrap state machine,
6370 * load bootstrap program into processor's memory,
6371 * prepare to load the "initialize" uCode */
6372 rc
= iwl_load_bsm(priv
);
6375 IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc
);
6379 /* start card; "initialize" will load runtime ucode */
6380 iwl_nic_start(priv
);
6382 /* MAC Address location in EEPROM same for 3945/4965 */
6383 get_eeprom_mac(priv
, priv
->mac_addr
);
6384 IWL_DEBUG_INFO("MAC address: %s\n",
6385 print_mac(mac
, priv
->mac_addr
));
6387 SET_IEEE80211_PERM_ADDR(priv
->hw
, priv
->mac_addr
);
6389 IWL_DEBUG_INFO(DRV_NAME
" is coming up\n");
6394 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
6397 /* tried to restart and config the device for as long as our
6398 * patience could withstand */
6399 IWL_ERROR("Unable to initialize device after %d attempts.\n", i
);
6404 /*****************************************************************************
6406 * Workqueue callbacks
6408 *****************************************************************************/
6410 static void iwl_bg_init_alive_start(struct work_struct
*data
)
6412 struct iwl_priv
*priv
=
6413 container_of(data
, struct iwl_priv
, init_alive_start
.work
);
6415 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6418 mutex_lock(&priv
->mutex
);
6419 iwl_init_alive_start(priv
);
6420 mutex_unlock(&priv
->mutex
);
6423 static void iwl_bg_alive_start(struct work_struct
*data
)
6425 struct iwl_priv
*priv
=
6426 container_of(data
, struct iwl_priv
, alive_start
.work
);
6428 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6431 mutex_lock(&priv
->mutex
);
6432 iwl_alive_start(priv
);
6433 mutex_unlock(&priv
->mutex
);
6436 static void iwl_bg_rf_kill(struct work_struct
*work
)
6438 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
, rf_kill
);
6440 wake_up_interruptible(&priv
->wait_command_queue
);
6442 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6445 mutex_lock(&priv
->mutex
);
6447 if (!iwl_is_rfkill(priv
)) {
6448 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_RF_KILL
,
6449 "HW and/or SW RF Kill no longer active, restarting "
6451 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6452 queue_work(priv
->workqueue
, &priv
->restart
);
6455 if (!test_bit(STATUS_RF_KILL_HW
, &priv
->status
))
6456 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
6457 "disabled by SW switch\n");
6459 IWL_WARNING("Radio Frequency Kill Switch is On:\n"
6460 "Kill switch must be turned off for "
6461 "wireless networking to work.\n");
6463 mutex_unlock(&priv
->mutex
);
6466 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
6468 static void iwl_bg_scan_check(struct work_struct
*data
)
6470 struct iwl_priv
*priv
=
6471 container_of(data
, struct iwl_priv
, scan_check
.work
);
6473 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6476 mutex_lock(&priv
->mutex
);
6477 if (test_bit(STATUS_SCANNING
, &priv
->status
) ||
6478 test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
6479 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_SCAN
,
6480 "Scan completion watchdog resetting adapter (%dms)\n",
6481 jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG
));
6483 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6484 iwl_send_scan_abort(priv
);
6486 mutex_unlock(&priv
->mutex
);
6489 static void iwl_bg_request_scan(struct work_struct
*data
)
6491 struct iwl_priv
*priv
=
6492 container_of(data
, struct iwl_priv
, request_scan
);
6493 struct iwl_host_cmd cmd
= {
6494 .id
= REPLY_SCAN_CMD
,
6495 .len
= sizeof(struct iwl_scan_cmd
),
6496 .meta
.flags
= CMD_SIZE_HUGE
,
6499 struct iwl_scan_cmd
*scan
;
6500 struct ieee80211_conf
*conf
= NULL
;
6504 conf
= ieee80211_get_hw_conf(priv
->hw
);
6506 mutex_lock(&priv
->mutex
);
6508 if (!iwl_is_ready(priv
)) {
6509 IWL_WARNING("request scan called when driver not ready.\n");
6513 /* Make sure the scan wasn't cancelled before this queued work
6514 * was given the chance to run... */
6515 if (!test_bit(STATUS_SCANNING
, &priv
->status
))
6518 /* This should never be called or scheduled if there is currently
6519 * a scan active in the hardware. */
6520 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
6521 IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
6522 "Ignoring second request.\n");
6527 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
6528 IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
6532 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
6533 IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
6537 if (iwl_is_rfkill(priv
)) {
6538 IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
6542 if (!test_bit(STATUS_READY
, &priv
->status
)) {
6543 IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
6547 if (!priv
->scan_bands
) {
6548 IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
6553 priv
->scan
= kmalloc(sizeof(struct iwl_scan_cmd
) +
6554 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
6561 memset(scan
, 0, sizeof(struct iwl_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
6563 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
6564 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
6566 if (iwl_is_associated(priv
)) {
6569 u32 suspend_time
= 100;
6570 u32 scan_suspend_time
= 100;
6571 unsigned long flags
;
6573 IWL_DEBUG_INFO("Scanning while associated...\n");
6575 spin_lock_irqsave(&priv
->lock
, flags
);
6576 interval
= priv
->beacon_int
;
6577 spin_unlock_irqrestore(&priv
->lock
, flags
);
6579 scan
->suspend_time
= 0;
6580 scan
->max_out_time
= cpu_to_le32(200 * 1024);
6582 interval
= suspend_time
;
6584 * suspend time format:
6585 * 0-19: beacon interval in usec (time before exec.)
6587 * 24-31: number of beacons (suspend between channels)
6590 extra
= (suspend_time
/ interval
) << 24;
6591 scan_suspend_time
= 0xFF0FFFFF &
6592 (extra
| ((suspend_time
% interval
) * 1024));
6594 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
6595 IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
6596 scan_suspend_time
, interval
);
6599 /* We should add the ability for user to lock to PASSIVE ONLY */
6600 if (priv
->one_direct_scan
) {
6602 ("Kicking off one direct scan for '%s'\n",
6603 iwl_escape_essid(priv
->direct_ssid
,
6604 priv
->direct_ssid_len
));
6605 scan
->direct_scan
[0].id
= WLAN_EID_SSID
;
6606 scan
->direct_scan
[0].len
= priv
->direct_ssid_len
;
6607 memcpy(scan
->direct_scan
[0].ssid
,
6608 priv
->direct_ssid
, priv
->direct_ssid_len
);
6610 } else if (!iwl_is_associated(priv
) && priv
->essid_len
) {
6611 scan
->direct_scan
[0].id
= WLAN_EID_SSID
;
6612 scan
->direct_scan
[0].len
= priv
->essid_len
;
6613 memcpy(scan
->direct_scan
[0].ssid
, priv
->essid
, priv
->essid_len
);
6618 /* We don't build a direct scan probe request; the uCode will do
6619 * that based on the direct_mask added to each channel entry */
6620 scan
->tx_cmd
.len
= cpu_to_le16(
6621 iwl_fill_probe_req(priv
, (struct ieee80211_mgmt
*)scan
->data
,
6622 IWL_MAX_SCAN_SIZE
- sizeof(scan
), 0));
6623 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
6624 scan
->tx_cmd
.sta_id
= priv
->hw_setting
.bcast_sta_id
;
6625 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
6627 /* flags + rate selection */
6629 switch (priv
->scan_bands
) {
6631 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
6632 scan
->tx_cmd
.rate
= IWL_RATE_1M_PLCP
;
6633 scan
->good_CRC_th
= 0;
6634 phymode
= MODE_IEEE80211G
;
6638 scan
->tx_cmd
.rate
= IWL_RATE_6M_PLCP
;
6639 scan
->good_CRC_th
= IWL_GOOD_CRC_TH
;
6640 phymode
= MODE_IEEE80211A
;
6644 IWL_WARNING("Invalid scan band count\n");
6648 /* select Rx antennas */
6649 scan
->flags
|= iwl3945_get_antenna_flags(priv
);
6651 if (priv
->iw_mode
== IEEE80211_IF_TYPE_MNTR
)
6652 scan
->filter_flags
= RXON_FILTER_PROMISC_MSK
;
6656 ("Initiating direct scan for %s.\n",
6657 iwl_escape_essid(priv
->essid
, priv
->essid_len
));
6659 IWL_DEBUG_SCAN("Initiating indirect scan.\n");
6661 scan
->channel_count
=
6662 iwl_get_channels_for_scan(
6663 priv
, phymode
, 1, /* active */
6665 (void *)&scan
->data
[le16_to_cpu(scan
->tx_cmd
.len
)]);
6667 cmd
.len
+= le16_to_cpu(scan
->tx_cmd
.len
) +
6668 scan
->channel_count
* sizeof(struct iwl_scan_channel
);
6670 scan
->len
= cpu_to_le16(cmd
.len
);
6672 set_bit(STATUS_SCAN_HW
, &priv
->status
);
6673 rc
= iwl_send_cmd_sync(priv
, &cmd
);
6677 queue_delayed_work(priv
->workqueue
, &priv
->scan_check
,
6678 IWL_SCAN_CHECK_WATCHDOG
);
6680 mutex_unlock(&priv
->mutex
);
6684 /* inform mac80211 sacn aborted */
6685 queue_work(priv
->workqueue
, &priv
->scan_completed
);
6686 mutex_unlock(&priv
->mutex
);
6689 static void iwl_bg_up(struct work_struct
*data
)
6691 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, up
);
6693 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6696 mutex_lock(&priv
->mutex
);
6698 mutex_unlock(&priv
->mutex
);
6701 static void iwl_bg_restart(struct work_struct
*data
)
6703 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
6705 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6709 queue_work(priv
->workqueue
, &priv
->up
);
6712 static void iwl_bg_rx_replenish(struct work_struct
*data
)
6714 struct iwl_priv
*priv
=
6715 container_of(data
, struct iwl_priv
, rx_replenish
);
6717 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6720 mutex_lock(&priv
->mutex
);
6721 iwl_rx_replenish(priv
);
6722 mutex_unlock(&priv
->mutex
);
6725 static void iwl_bg_post_associate(struct work_struct
*data
)
6727 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
,
6728 post_associate
.work
);
6731 struct ieee80211_conf
*conf
= NULL
;
6732 DECLARE_MAC_BUF(mac
);
6734 if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) {
6735 IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__
);
6740 IWL_DEBUG_ASSOC("Associated as %d to: %s\n",
6742 print_mac(mac
, priv
->active_rxon
.bssid_addr
));
6744 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6747 mutex_lock(&priv
->mutex
);
6749 if (!priv
->interface_id
|| !priv
->is_open
) {
6750 mutex_unlock(&priv
->mutex
);
6753 iwl_scan_cancel_timeout(priv
, 200);
6755 conf
= ieee80211_get_hw_conf(priv
->hw
);
6757 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
6758 iwl_commit_rxon(priv
);
6760 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
6761 iwl_setup_rxon_timing(priv
);
6762 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
6763 sizeof(priv
->rxon_timing
), &priv
->rxon_timing
);
6765 IWL_WARNING("REPLY_RXON_TIMING failed - "
6766 "Attempting to continue.\n");
6768 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
6770 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
6772 IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
6773 priv
->assoc_id
, priv
->beacon_int
);
6775 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
6776 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
6778 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
6780 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
6781 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_SLOT_TIME
)
6782 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
6784 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
6786 if (priv
->iw_mode
== IEEE80211_IF_TYPE_IBSS
)
6787 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
6791 iwl_commit_rxon(priv
);
6793 switch (priv
->iw_mode
) {
6794 case IEEE80211_IF_TYPE_STA
:
6795 iwl_rate_scale_init(priv
->hw
, IWL_AP_ID
);
6798 case IEEE80211_IF_TYPE_IBSS
:
6800 /* clear out the station table */
6801 iwl_clear_stations_table(priv
);
6803 iwl_add_station(priv
, BROADCAST_ADDR
, 0, 0);
6804 iwl_add_station(priv
, priv
->bssid
, 0, 0);
6805 iwl3945_sync_sta(priv
, IWL_STA_ID
,
6806 (priv
->phymode
== MODE_IEEE80211A
)?
6807 IWL_RATE_6M_PLCP
: IWL_RATE_1M_PLCP
,
6809 iwl_rate_scale_init(priv
->hw
, IWL_STA_ID
);
6810 iwl_send_beacon_cmd(priv
);
6815 IWL_ERROR("%s Should not be called in %d mode\n",
6816 __FUNCTION__
, priv
->iw_mode
);
6820 iwl_sequence_reset(priv
);
6822 #ifdef CONFIG_IWLWIFI_QOS
6823 iwl_activate_qos(priv
, 0);
6824 #endif /* CONFIG_IWLWIFI_QOS */
6825 mutex_unlock(&priv
->mutex
);
6828 static void iwl_bg_abort_scan(struct work_struct
*work
)
6830 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
6833 if (!iwl_is_ready(priv
))
6836 mutex_lock(&priv
->mutex
);
6838 set_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
6839 iwl_send_scan_abort(priv
);
6841 mutex_unlock(&priv
->mutex
);
6844 static void iwl_bg_scan_completed(struct work_struct
*work
)
6846 struct iwl_priv
*priv
=
6847 container_of(work
, struct iwl_priv
, scan_completed
);
6849 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_SCAN
, "SCAN complete scan\n");
6851 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6854 ieee80211_scan_completed(priv
->hw
);
6856 /* Since setting the TXPOWER may have been deferred while
6857 * performing the scan, fire one off */
6858 mutex_lock(&priv
->mutex
);
6859 iwl_hw_reg_send_txpower(priv
);
6860 mutex_unlock(&priv
->mutex
);
6863 /*****************************************************************************
6865 * mac80211 entry point functions
6867 *****************************************************************************/
6869 static int iwl_mac_start(struct ieee80211_hw
*hw
)
6871 struct iwl_priv
*priv
= hw
->priv
;
6873 IWL_DEBUG_MAC80211("enter\n");
6875 /* we should be verifying the device is ready to be opened */
6876 mutex_lock(&priv
->mutex
);
6880 if (!iwl_is_rfkill(priv
))
6881 ieee80211_start_queues(priv
->hw
);
6883 mutex_unlock(&priv
->mutex
);
6884 IWL_DEBUG_MAC80211("leave\n");
6888 static void iwl_mac_stop(struct ieee80211_hw
*hw
)
6890 struct iwl_priv
*priv
= hw
->priv
;
6892 IWL_DEBUG_MAC80211("enter\n");
6895 mutex_lock(&priv
->mutex
);
6896 /* stop mac, cancel any scan request and clear
6897 * RXON_FILTER_ASSOC_MSK BIT
6900 iwl_scan_cancel_timeout(priv
, 100);
6901 cancel_delayed_work(&priv
->post_associate
);
6902 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
6903 iwl_commit_rxon(priv
);
6904 mutex_unlock(&priv
->mutex
);
6906 IWL_DEBUG_MAC80211("leave\n");
6909 static int iwl_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
,
6910 struct ieee80211_tx_control
*ctl
)
6912 struct iwl_priv
*priv
= hw
->priv
;
6914 IWL_DEBUG_MAC80211("enter\n");
6916 if (priv
->iw_mode
== IEEE80211_IF_TYPE_MNTR
) {
6917 IWL_DEBUG_MAC80211("leave - monitor\n");
6921 IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
6924 if (iwl_tx_skb(priv
, skb
, ctl
))
6925 dev_kfree_skb_any(skb
);
6927 IWL_DEBUG_MAC80211("leave\n");
6931 static int iwl_mac_add_interface(struct ieee80211_hw
*hw
,
6932 struct ieee80211_if_init_conf
*conf
)
6934 struct iwl_priv
*priv
= hw
->priv
;
6935 unsigned long flags
;
6936 DECLARE_MAC_BUF(mac
);
6938 IWL_DEBUG_MAC80211("enter: id %d, type %d\n", conf
->if_id
, conf
->type
);
6940 IWL_DEBUG_MAC80211("enter: MAC %s\n",
6941 print_mac(mac
, conf
->mac_addr
));
6943 if (priv
->interface_id
) {
6944 IWL_DEBUG_MAC80211("leave - interface_id != 0\n");
6948 spin_lock_irqsave(&priv
->lock
, flags
);
6949 priv
->interface_id
= conf
->if_id
;
6951 spin_unlock_irqrestore(&priv
->lock
, flags
);
6953 mutex_lock(&priv
->mutex
);
6954 iwl_set_mode(priv
, conf
->type
);
6956 IWL_DEBUG_MAC80211("leave\n");
6957 mutex_unlock(&priv
->mutex
);
6963 * iwl_mac_config - mac80211 config callback
6965 * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
6966 * be set inappropriately and the driver currently sets the hardware up to
6967 * use it whenever needed.
6969 static int iwl_mac_config(struct ieee80211_hw
*hw
, struct ieee80211_conf
*conf
)
6971 struct iwl_priv
*priv
= hw
->priv
;
6972 const struct iwl_channel_info
*ch_info
;
6973 unsigned long flags
;
6975 mutex_lock(&priv
->mutex
);
6976 IWL_DEBUG_MAC80211("enter to channel %d\n", conf
->channel
);
6978 if (!iwl_is_ready(priv
)) {
6979 IWL_DEBUG_MAC80211("leave - not ready\n");
6980 mutex_unlock(&priv
->mutex
);
6984 /* TODO: Figure out how to get ieee80211_local->sta_scanning w/ only
6985 * what is exposed through include/ declrations */
6986 if (unlikely(!iwl_param_disable_hw_scan
&&
6987 test_bit(STATUS_SCANNING
, &priv
->status
))) {
6988 IWL_DEBUG_MAC80211("leave - scanning\n");
6989 mutex_unlock(&priv
->mutex
);
6993 spin_lock_irqsave(&priv
->lock
, flags
);
6995 ch_info
= iwl_get_channel_info(priv
, conf
->phymode
, conf
->channel
);
6996 if (!is_channel_valid(ch_info
)) {
6997 IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
6998 conf
->channel
, conf
->phymode
);
6999 IWL_DEBUG_MAC80211("leave - invalid channel\n");
7000 spin_unlock_irqrestore(&priv
->lock
, flags
);
7001 mutex_unlock(&priv
->mutex
);
7005 iwl_set_rxon_channel(priv
, conf
->phymode
, conf
->channel
);
7007 iwl_set_flags_for_phymode(priv
, conf
->phymode
);
7009 /* The list of supported rates and rate mask can be different
7010 * for each phymode; since the phymode may have changed, reset
7011 * the rate mask to what mac80211 lists */
7014 spin_unlock_irqrestore(&priv
->lock
, flags
);
7016 #ifdef IEEE80211_CONF_CHANNEL_SWITCH
7017 if (conf
->flags
& IEEE80211_CONF_CHANNEL_SWITCH
) {
7018 iwl_hw_channel_switch(priv
, conf
->channel
);
7019 mutex_unlock(&priv
->mutex
);
7024 iwl_radio_kill_sw(priv
, !conf
->radio_enabled
);
7026 if (!conf
->radio_enabled
) {
7027 IWL_DEBUG_MAC80211("leave - radio disabled\n");
7028 mutex_unlock(&priv
->mutex
);
7032 if (iwl_is_rfkill(priv
)) {
7033 IWL_DEBUG_MAC80211("leave - RF kill\n");
7034 mutex_unlock(&priv
->mutex
);
7040 if (memcmp(&priv
->active_rxon
,
7041 &priv
->staging_rxon
, sizeof(priv
->staging_rxon
)))
7042 iwl_commit_rxon(priv
);
7044 IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
7046 IWL_DEBUG_MAC80211("leave\n");
7048 mutex_unlock(&priv
->mutex
);
7053 static void iwl_config_ap(struct iwl_priv
*priv
)
7057 if (priv
->status
& STATUS_EXIT_PENDING
)
7060 /* The following should be done only at AP bring up */
7061 if ((priv
->active_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
) == 0) {
7063 /* RXON - unassoc (to set timing command) */
7064 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
7065 iwl_commit_rxon(priv
);
7068 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
7069 iwl_setup_rxon_timing(priv
);
7070 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
7071 sizeof(priv
->rxon_timing
), &priv
->rxon_timing
);
7073 IWL_WARNING("REPLY_RXON_TIMING failed - "
7074 "Attempting to continue.\n");
7076 /* FIXME: what should be the assoc_id for AP? */
7077 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
7078 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
7079 priv
->staging_rxon
.flags
|=
7080 RXON_FLG_SHORT_PREAMBLE_MSK
;
7082 priv
->staging_rxon
.flags
&=
7083 ~RXON_FLG_SHORT_PREAMBLE_MSK
;
7085 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
7086 if (priv
->assoc_capability
&
7087 WLAN_CAPABILITY_SHORT_SLOT_TIME
)
7088 priv
->staging_rxon
.flags
|=
7089 RXON_FLG_SHORT_SLOT_MSK
;
7091 priv
->staging_rxon
.flags
&=
7092 ~RXON_FLG_SHORT_SLOT_MSK
;
7094 if (priv
->iw_mode
== IEEE80211_IF_TYPE_IBSS
)
7095 priv
->staging_rxon
.flags
&=
7096 ~RXON_FLG_SHORT_SLOT_MSK
;
7098 /* restore RXON assoc */
7099 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
7100 iwl_commit_rxon(priv
);
7101 iwl_add_station(priv
, BROADCAST_ADDR
, 0, 0);
7103 iwl_send_beacon_cmd(priv
);
7105 /* FIXME - we need to add code here to detect a totally new
7106 * configuration, reset the AP, unassoc, rxon timing, assoc,
7107 * clear sta table, add BCAST sta... */
7110 static int iwl_mac_config_interface(struct ieee80211_hw
*hw
, int if_id
,
7111 struct ieee80211_if_conf
*conf
)
7113 struct iwl_priv
*priv
= hw
->priv
;
7114 DECLARE_MAC_BUF(mac
);
7115 unsigned long flags
;
7121 /* XXX: this MUST use conf->mac_addr */
7123 if ((priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) &&
7124 (!conf
->beacon
|| !conf
->ssid_len
)) {
7126 ("Leaving in AP mode because HostAPD is not ready.\n");
7130 mutex_lock(&priv
->mutex
);
7132 IWL_DEBUG_MAC80211("enter: interface id %d\n", if_id
);
7134 IWL_DEBUG_MAC80211("bssid: %s\n",
7135 print_mac(mac
, conf
->bssid
));
7138 * very dubious code was here; the probe filtering flag is never set:
7140 if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
7141 !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
7143 if (unlikely(test_bit(STATUS_SCANNING
, &priv
->status
))) {
7144 IWL_DEBUG_MAC80211("leave - scanning\n");
7145 mutex_unlock(&priv
->mutex
);
7149 if (priv
->interface_id
!= if_id
) {
7150 IWL_DEBUG_MAC80211("leave - interface_id != if_id\n");
7151 mutex_unlock(&priv
->mutex
);
7155 if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) {
7157 conf
->bssid
= priv
->mac_addr
;
7158 memcpy(priv
->bssid
, priv
->mac_addr
, ETH_ALEN
);
7159 IWL_DEBUG_MAC80211("bssid was set to: %s\n",
7160 print_mac(mac
, conf
->bssid
));
7162 if (priv
->ibss_beacon
)
7163 dev_kfree_skb(priv
->ibss_beacon
);
7165 priv
->ibss_beacon
= conf
->beacon
;
7168 if (conf
->bssid
&& !is_zero_ether_addr(conf
->bssid
) &&
7169 !is_multicast_ether_addr(conf
->bssid
)) {
7170 /* If there is currently a HW scan going on in the background
7171 * then we need to cancel it else the RXON below will fail. */
7172 if (iwl_scan_cancel_timeout(priv
, 100)) {
7173 IWL_WARNING("Aborted scan still in progress "
7175 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
7176 mutex_unlock(&priv
->mutex
);
7179 memcpy(priv
->staging_rxon
.bssid_addr
, conf
->bssid
, ETH_ALEN
);
7181 /* TODO: Audit driver for usage of these members and see
7182 * if mac80211 deprecates them (priv->bssid looks like it
7183 * shouldn't be there, but I haven't scanned the IBSS code
7184 * to verify) - jpk */
7185 memcpy(priv
->bssid
, conf
->bssid
, ETH_ALEN
);
7187 if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
)
7188 iwl_config_ap(priv
);
7190 rc
= iwl_commit_rxon(priv
);
7191 if ((priv
->iw_mode
== IEEE80211_IF_TYPE_STA
) && rc
)
7192 iwl_add_station(priv
,
7193 priv
->active_rxon
.bssid_addr
, 1, 0);
7197 iwl_scan_cancel_timeout(priv
, 100);
7198 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
7199 iwl_commit_rxon(priv
);
7202 spin_lock_irqsave(&priv
->lock
, flags
);
7203 if (!conf
->ssid_len
)
7204 memset(priv
->essid
, 0, IW_ESSID_MAX_SIZE
);
7206 memcpy(priv
->essid
, conf
->ssid
, conf
->ssid_len
);
7208 priv
->essid_len
= conf
->ssid_len
;
7209 spin_unlock_irqrestore(&priv
->lock
, flags
);
7211 IWL_DEBUG_MAC80211("leave\n");
7212 mutex_unlock(&priv
->mutex
);
7217 static void iwl_configure_filter(struct ieee80211_hw
*hw
,
7218 unsigned int changed_flags
,
7219 unsigned int *total_flags
,
7220 int mc_count
, struct dev_addr_list
*mc_list
)
7224 * see also iwl_connection_init_rx_config
7229 static void iwl_mac_remove_interface(struct ieee80211_hw
*hw
,
7230 struct ieee80211_if_init_conf
*conf
)
7232 struct iwl_priv
*priv
= hw
->priv
;
7234 IWL_DEBUG_MAC80211("enter\n");
7236 mutex_lock(&priv
->mutex
);
7238 iwl_scan_cancel_timeout(priv
, 100);
7239 cancel_delayed_work(&priv
->post_associate
);
7240 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
7241 iwl_commit_rxon(priv
);
7243 if (priv
->interface_id
== conf
->if_id
) {
7244 priv
->interface_id
= 0;
7245 memset(priv
->bssid
, 0, ETH_ALEN
);
7246 memset(priv
->essid
, 0, IW_ESSID_MAX_SIZE
);
7247 priv
->essid_len
= 0;
7249 mutex_unlock(&priv
->mutex
);
7251 IWL_DEBUG_MAC80211("leave\n");
7255 #define IWL_DELAY_NEXT_SCAN (HZ*2)
7256 static int iwl_mac_hw_scan(struct ieee80211_hw
*hw
, u8
*ssid
, size_t len
)
7259 unsigned long flags
;
7260 struct iwl_priv
*priv
= hw
->priv
;
7262 IWL_DEBUG_MAC80211("enter\n");
7264 mutex_lock(&priv
->mutex
);
7265 spin_lock_irqsave(&priv
->lock
, flags
);
7267 if (!iwl_is_ready_rf(priv
)) {
7269 IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
7273 if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) { /* APs don't scan */
7275 IWL_ERROR("ERROR: APs don't scan\n");
7279 /* if we just finished scan ask for delay */
7280 if (priv
->last_scan_jiffies
&&
7281 time_after(priv
->last_scan_jiffies
+ IWL_DELAY_NEXT_SCAN
,
7287 IWL_DEBUG_SCAN("direct scan for "
7289 iwl_escape_essid(ssid
, len
), (int)len
);
7291 priv
->one_direct_scan
= 1;
7292 priv
->direct_ssid_len
= (u8
)
7293 min((u8
) len
, (u8
) IW_ESSID_MAX_SIZE
);
7294 memcpy(priv
->direct_ssid
, ssid
, priv
->direct_ssid_len
);
7296 priv
->one_direct_scan
= 0;
7298 rc
= iwl_scan_initiate(priv
);
7300 IWL_DEBUG_MAC80211("leave\n");
7303 spin_unlock_irqrestore(&priv
->lock
, flags
);
7304 mutex_unlock(&priv
->mutex
);
7309 static int iwl_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
7310 const u8
*local_addr
, const u8
*addr
,
7311 struct ieee80211_key_conf
*key
)
7313 struct iwl_priv
*priv
= hw
->priv
;
7317 IWL_DEBUG_MAC80211("enter\n");
7319 if (!iwl_param_hwcrypto
) {
7320 IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
7324 if (is_zero_ether_addr(addr
))
7325 /* only support pairwise keys */
7328 sta_id
= iwl_hw_find_station(priv
, addr
);
7329 if (sta_id
== IWL_INVALID_STATION
) {
7330 DECLARE_MAC_BUF(mac
);
7332 IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
7333 print_mac(mac
, addr
));
7337 mutex_lock(&priv
->mutex
);
7339 iwl_scan_cancel_timeout(priv
, 100);
7343 rc
= iwl_update_sta_key_info(priv
, key
, sta_id
);
7345 iwl_set_rxon_hwcrypto(priv
, 1);
7346 iwl_commit_rxon(priv
);
7347 key
->hw_key_idx
= sta_id
;
7348 IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n");
7349 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
7353 rc
= iwl_clear_sta_key_info(priv
, sta_id
);
7355 iwl_set_rxon_hwcrypto(priv
, 0);
7356 iwl_commit_rxon(priv
);
7357 IWL_DEBUG_MAC80211("disable hwcrypto key\n");
7364 IWL_DEBUG_MAC80211("leave\n");
7365 mutex_unlock(&priv
->mutex
);
7370 static int iwl_mac_conf_tx(struct ieee80211_hw
*hw
, int queue
,
7371 const struct ieee80211_tx_queue_params
*params
)
7373 struct iwl_priv
*priv
= hw
->priv
;
7374 #ifdef CONFIG_IWLWIFI_QOS
7375 unsigned long flags
;
7377 #endif /* CONFIG_IWL_QOS */
7379 IWL_DEBUG_MAC80211("enter\n");
7381 if (!iwl_is_ready_rf(priv
)) {
7382 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7386 if (queue
>= AC_NUM
) {
7387 IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue
);
7391 #ifdef CONFIG_IWLWIFI_QOS
7392 if (!priv
->qos_data
.qos_enable
) {
7393 priv
->qos_data
.qos_active
= 0;
7394 IWL_DEBUG_MAC80211("leave - qos not enabled\n");
7397 q
= AC_NUM
- 1 - queue
;
7399 spin_lock_irqsave(&priv
->lock
, flags
);
7401 priv
->qos_data
.def_qos_parm
.ac
[q
].cw_min
= cpu_to_le16(params
->cw_min
);
7402 priv
->qos_data
.def_qos_parm
.ac
[q
].cw_max
= cpu_to_le16(params
->cw_max
);
7403 priv
->qos_data
.def_qos_parm
.ac
[q
].aifsn
= params
->aifs
;
7404 priv
->qos_data
.def_qos_parm
.ac
[q
].edca_txop
=
7405 cpu_to_le16((params
->burst_time
* 100));
7407 priv
->qos_data
.def_qos_parm
.ac
[q
].reserved1
= 0;
7408 priv
->qos_data
.qos_active
= 1;
7410 spin_unlock_irqrestore(&priv
->lock
, flags
);
7412 mutex_lock(&priv
->mutex
);
7413 if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
)
7414 iwl_activate_qos(priv
, 1);
7415 else if (priv
->assoc_id
&& iwl_is_associated(priv
))
7416 iwl_activate_qos(priv
, 0);
7418 mutex_unlock(&priv
->mutex
);
7420 #endif /*CONFIG_IWLWIFI_QOS */
7422 IWL_DEBUG_MAC80211("leave\n");
7426 static int iwl_mac_get_tx_stats(struct ieee80211_hw
*hw
,
7427 struct ieee80211_tx_queue_stats
*stats
)
7429 struct iwl_priv
*priv
= hw
->priv
;
7431 struct iwl_tx_queue
*txq
;
7432 struct iwl_queue
*q
;
7433 unsigned long flags
;
7435 IWL_DEBUG_MAC80211("enter\n");
7437 if (!iwl_is_ready_rf(priv
)) {
7438 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7442 spin_lock_irqsave(&priv
->lock
, flags
);
7444 for (i
= 0; i
< AC_NUM
; i
++) {
7445 txq
= &priv
->txq
[i
];
7447 avail
= iwl_queue_space(q
);
7449 stats
->data
[i
].len
= q
->n_window
- avail
;
7450 stats
->data
[i
].limit
= q
->n_window
- q
->high_mark
;
7451 stats
->data
[i
].count
= q
->n_window
;
7454 spin_unlock_irqrestore(&priv
->lock
, flags
);
7456 IWL_DEBUG_MAC80211("leave\n");
7461 static int iwl_mac_get_stats(struct ieee80211_hw
*hw
,
7462 struct ieee80211_low_level_stats
*stats
)
7464 IWL_DEBUG_MAC80211("enter\n");
7465 IWL_DEBUG_MAC80211("leave\n");
7470 static u64
iwl_mac_get_tsf(struct ieee80211_hw
*hw
)
7472 IWL_DEBUG_MAC80211("enter\n");
7473 IWL_DEBUG_MAC80211("leave\n");
7478 static void iwl_mac_reset_tsf(struct ieee80211_hw
*hw
)
7480 struct iwl_priv
*priv
= hw
->priv
;
7481 unsigned long flags
;
7483 mutex_lock(&priv
->mutex
);
7484 IWL_DEBUG_MAC80211("enter\n");
7486 #ifdef CONFIG_IWLWIFI_QOS
7487 iwl_reset_qos(priv
);
7489 cancel_delayed_work(&priv
->post_associate
);
7491 spin_lock_irqsave(&priv
->lock
, flags
);
7493 priv
->assoc_capability
= 0;
7494 priv
->call_post_assoc_from_beacon
= 0;
7496 /* new association get rid of ibss beacon skb */
7497 if (priv
->ibss_beacon
)
7498 dev_kfree_skb(priv
->ibss_beacon
);
7500 priv
->ibss_beacon
= NULL
;
7502 priv
->beacon_int
= priv
->hw
->conf
.beacon_int
;
7503 priv
->timestamp1
= 0;
7504 priv
->timestamp0
= 0;
7505 if ((priv
->iw_mode
== IEEE80211_IF_TYPE_STA
))
7506 priv
->beacon_int
= 0;
7508 spin_unlock_irqrestore(&priv
->lock
, flags
);
7510 /* we are restarting association process
7511 * clear RXON_FILTER_ASSOC_MSK bit
7513 if (priv
->iw_mode
!= IEEE80211_IF_TYPE_AP
) {
7514 iwl_scan_cancel_timeout(priv
, 100);
7515 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
7516 iwl_commit_rxon(priv
);
7519 /* Per mac80211.h: This is only used in IBSS mode... */
7520 if (priv
->iw_mode
!= IEEE80211_IF_TYPE_IBSS
) {
7522 IWL_DEBUG_MAC80211("leave - not in IBSS\n");
7523 mutex_unlock(&priv
->mutex
);
7527 if (!iwl_is_ready_rf(priv
)) {
7528 IWL_DEBUG_MAC80211("leave - not ready\n");
7529 mutex_unlock(&priv
->mutex
);
7533 priv
->only_active_channel
= 0;
7537 mutex_unlock(&priv
->mutex
);
7539 IWL_DEBUG_MAC80211("leave\n");
7543 static int iwl_mac_beacon_update(struct ieee80211_hw
*hw
, struct sk_buff
*skb
,
7544 struct ieee80211_tx_control
*control
)
7546 struct iwl_priv
*priv
= hw
->priv
;
7547 unsigned long flags
;
7549 mutex_lock(&priv
->mutex
);
7550 IWL_DEBUG_MAC80211("enter\n");
7552 if (!iwl_is_ready_rf(priv
)) {
7553 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7554 mutex_unlock(&priv
->mutex
);
7558 if (priv
->iw_mode
!= IEEE80211_IF_TYPE_IBSS
) {
7559 IWL_DEBUG_MAC80211("leave - not IBSS\n");
7560 mutex_unlock(&priv
->mutex
);
7564 spin_lock_irqsave(&priv
->lock
, flags
);
7566 if (priv
->ibss_beacon
)
7567 dev_kfree_skb(priv
->ibss_beacon
);
7569 priv
->ibss_beacon
= skb
;
7573 IWL_DEBUG_MAC80211("leave\n");
7574 spin_unlock_irqrestore(&priv
->lock
, flags
);
7576 #ifdef CONFIG_IWLWIFI_QOS
7577 iwl_reset_qos(priv
);
7580 queue_work(priv
->workqueue
, &priv
->post_associate
.work
);
7582 mutex_unlock(&priv
->mutex
);
7587 /*****************************************************************************
7591 *****************************************************************************/
7593 #ifdef CONFIG_IWLWIFI_DEBUG
7596 * The following adds a new attribute to the sysfs representation
7597 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
7598 * used for controlling the debug level.
7600 * See the level definitions in iwl for details.
7603 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
7605 return sprintf(buf
, "0x%08X\n", iwl_debug_level
);
7607 static ssize_t
store_debug_level(struct device_driver
*d
,
7608 const char *buf
, size_t count
)
7610 char *p
= (char *)buf
;
7613 val
= simple_strtoul(p
, &p
, 0);
7615 printk(KERN_INFO DRV_NAME
7616 ": %s is not in hex or decimal form.\n", buf
);
7618 iwl_debug_level
= val
;
7620 return strnlen(buf
, count
);
7623 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
7624 show_debug_level
, store_debug_level
);
7626 #endif /* CONFIG_IWLWIFI_DEBUG */
7628 static ssize_t
show_rf_kill(struct device
*d
,
7629 struct device_attribute
*attr
, char *buf
)
7632 * 0 - RF kill not enabled
7633 * 1 - SW based RF kill active (sysfs)
7634 * 2 - HW based RF kill active
7635 * 3 - Both HW and SW based RF kill active
7637 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7638 int val
= (test_bit(STATUS_RF_KILL_SW
, &priv
->status
) ? 0x1 : 0x0) |
7639 (test_bit(STATUS_RF_KILL_HW
, &priv
->status
) ? 0x2 : 0x0);
7641 return sprintf(buf
, "%i\n", val
);
7644 static ssize_t
store_rf_kill(struct device
*d
,
7645 struct device_attribute
*attr
,
7646 const char *buf
, size_t count
)
7648 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7650 mutex_lock(&priv
->mutex
);
7651 iwl_radio_kill_sw(priv
, buf
[0] == '1');
7652 mutex_unlock(&priv
->mutex
);
7657 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
7659 static ssize_t
show_temperature(struct device
*d
,
7660 struct device_attribute
*attr
, char *buf
)
7662 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7664 if (!iwl_is_alive(priv
))
7667 return sprintf(buf
, "%d\n", iwl_hw_get_temperature(priv
));
7670 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
7672 static ssize_t
show_rs_window(struct device
*d
,
7673 struct device_attribute
*attr
,
7676 struct iwl_priv
*priv
= d
->driver_data
;
7677 return iwl_fill_rs_info(priv
->hw
, buf
, IWL_AP_ID
);
7679 static DEVICE_ATTR(rs_window
, S_IRUGO
, show_rs_window
, NULL
);
7681 static ssize_t
show_tx_power(struct device
*d
,
7682 struct device_attribute
*attr
, char *buf
)
7684 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7685 return sprintf(buf
, "%d\n", priv
->user_txpower_limit
);
7688 static ssize_t
store_tx_power(struct device
*d
,
7689 struct device_attribute
*attr
,
7690 const char *buf
, size_t count
)
7692 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7693 char *p
= (char *)buf
;
7696 val
= simple_strtoul(p
, &p
, 10);
7698 printk(KERN_INFO DRV_NAME
7699 ": %s is not in decimal form.\n", buf
);
7701 iwl_hw_reg_set_txpower(priv
, val
);
7706 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
7708 static ssize_t
show_flags(struct device
*d
,
7709 struct device_attribute
*attr
, char *buf
)
7711 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7713 return sprintf(buf
, "0x%04X\n", priv
->active_rxon
.flags
);
7716 static ssize_t
store_flags(struct device
*d
,
7717 struct device_attribute
*attr
,
7718 const char *buf
, size_t count
)
7720 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7721 u32 flags
= simple_strtoul(buf
, NULL
, 0);
7723 mutex_lock(&priv
->mutex
);
7724 if (le32_to_cpu(priv
->staging_rxon
.flags
) != flags
) {
7725 /* Cancel any currently running scans... */
7726 if (iwl_scan_cancel_timeout(priv
, 100))
7727 IWL_WARNING("Could not cancel scan.\n");
7729 IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
7731 priv
->staging_rxon
.flags
= cpu_to_le32(flags
);
7732 iwl_commit_rxon(priv
);
7735 mutex_unlock(&priv
->mutex
);
7740 static DEVICE_ATTR(flags
, S_IWUSR
| S_IRUGO
, show_flags
, store_flags
);
7742 static ssize_t
show_filter_flags(struct device
*d
,
7743 struct device_attribute
*attr
, char *buf
)
7745 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7747 return sprintf(buf
, "0x%04X\n",
7748 le32_to_cpu(priv
->active_rxon
.filter_flags
));
7751 static ssize_t
store_filter_flags(struct device
*d
,
7752 struct device_attribute
*attr
,
7753 const char *buf
, size_t count
)
7755 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7756 u32 filter_flags
= simple_strtoul(buf
, NULL
, 0);
7758 mutex_lock(&priv
->mutex
);
7759 if (le32_to_cpu(priv
->staging_rxon
.filter_flags
) != filter_flags
) {
7760 /* Cancel any currently running scans... */
7761 if (iwl_scan_cancel_timeout(priv
, 100))
7762 IWL_WARNING("Could not cancel scan.\n");
7764 IWL_DEBUG_INFO("Committing rxon.filter_flags = "
7765 "0x%04X\n", filter_flags
);
7766 priv
->staging_rxon
.filter_flags
=
7767 cpu_to_le32(filter_flags
);
7768 iwl_commit_rxon(priv
);
7771 mutex_unlock(&priv
->mutex
);
7776 static DEVICE_ATTR(filter_flags
, S_IWUSR
| S_IRUGO
, show_filter_flags
,
7777 store_filter_flags
);
7779 static ssize_t
show_tune(struct device
*d
,
7780 struct device_attribute
*attr
, char *buf
)
7782 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7784 return sprintf(buf
, "0x%04X\n",
7785 (priv
->phymode
<< 8) |
7786 le16_to_cpu(priv
->active_rxon
.channel
));
7789 static void iwl_set_flags_for_phymode(struct iwl_priv
*priv
, u8 phymode
);
7791 static ssize_t
store_tune(struct device
*d
,
7792 struct device_attribute
*attr
,
7793 const char *buf
, size_t count
)
7795 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
7796 char *p
= (char *)buf
;
7797 u16 tune
= simple_strtoul(p
, &p
, 0);
7798 u8 phymode
= (tune
>> 8) & 0xff;
7799 u16 channel
= tune
& 0xff;
7801 IWL_DEBUG_INFO("Tune request to:%d channel:%d\n", phymode
, channel
);
7803 mutex_lock(&priv
->mutex
);
7804 if ((le16_to_cpu(priv
->staging_rxon
.channel
) != channel
) ||
7805 (priv
->phymode
!= phymode
)) {
7806 const struct iwl_channel_info
*ch_info
;
7808 ch_info
= iwl_get_channel_info(priv
, phymode
, channel
);
7810 IWL_WARNING("Requested invalid phymode/channel "
7811 "combination: %d %d\n", phymode
, channel
);
7812 mutex_unlock(&priv
->mutex
);
7816 /* Cancel any currently running scans... */
7817 if (iwl_scan_cancel_timeout(priv
, 100))
7818 IWL_WARNING("Could not cancel scan.\n");
7820 IWL_DEBUG_INFO("Committing phymode and "
7821 "rxon.channel = %d %d\n",
7824 iwl_set_rxon_channel(priv
, phymode
, channel
);
7825 iwl_set_flags_for_phymode(priv
, phymode
);
7828 iwl_commit_rxon(priv
);
7831 mutex_unlock(&priv
->mutex
);
7836 static DEVICE_ATTR(tune
, S_IWUSR
| S_IRUGO
, show_tune
, store_tune
);
7838 #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT
7840 static ssize_t
show_measurement(struct device
*d
,
7841 struct device_attribute
*attr
, char *buf
)
7843 struct iwl_priv
*priv
= dev_get_drvdata(d
);
7844 struct iwl_spectrum_notification measure_report
;
7845 u32 size
= sizeof(measure_report
), len
= 0, ofs
= 0;
7846 u8
*data
= (u8
*) & measure_report
;
7847 unsigned long flags
;
7849 spin_lock_irqsave(&priv
->lock
, flags
);
7850 if (!(priv
->measurement_status
& MEASUREMENT_READY
)) {
7851 spin_unlock_irqrestore(&priv
->lock
, flags
);
7854 memcpy(&measure_report
, &priv
->measure_report
, size
);
7855 priv
->measurement_status
= 0;
7856 spin_unlock_irqrestore(&priv
->lock
, flags
);
7858 while (size
&& (PAGE_SIZE
- len
)) {
7859 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
7860 PAGE_SIZE
- len
, 1);
7862 if (PAGE_SIZE
- len
)
7866 size
-= min(size
, 16U);
7872 static ssize_t
store_measurement(struct device
*d
,
7873 struct device_attribute
*attr
,
7874 const char *buf
, size_t count
)
7876 struct iwl_priv
*priv
= dev_get_drvdata(d
);
7877 struct ieee80211_measurement_params params
= {
7878 .channel
= le16_to_cpu(priv
->active_rxon
.channel
),
7879 .start_time
= cpu_to_le64(priv
->last_tsf
),
7880 .duration
= cpu_to_le16(1),
7882 u8 type
= IWL_MEASURE_BASIC
;
7888 strncpy(buffer
, buf
, min(sizeof(buffer
), count
));
7889 channel
= simple_strtoul(p
, NULL
, 0);
7891 params
.channel
= channel
;
7894 while (*p
&& *p
!= ' ')
7897 type
= simple_strtoul(p
+ 1, NULL
, 0);
7900 IWL_DEBUG_INFO("Invoking measurement of type %d on "
7901 "channel %d (for '%s')\n", type
, params
.channel
, buf
);
7902 iwl_get_measurement(priv
, ¶ms
, type
);
7907 static DEVICE_ATTR(measurement
, S_IRUSR
| S_IWUSR
,
7908 show_measurement
, store_measurement
);
7909 #endif /* CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT */
7911 static ssize_t
show_rate(struct device
*d
,
7912 struct device_attribute
*attr
, char *buf
)
7914 struct iwl_priv
*priv
= dev_get_drvdata(d
);
7915 unsigned long flags
;
7918 spin_lock_irqsave(&priv
->sta_lock
, flags
);
7919 if (priv
->iw_mode
== IEEE80211_IF_TYPE_STA
)
7920 i
= priv
->stations
[IWL_AP_ID
].current_rate
.s
.rate
;
7922 i
= priv
->stations
[IWL_STA_ID
].current_rate
.s
.rate
;
7923 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
7925 i
= iwl_rate_index_from_plcp(i
);
7927 return sprintf(buf
, "0\n");
7929 return sprintf(buf
, "%d%s\n",
7930 (iwl_rates
[i
].ieee
>> 1),
7931 (iwl_rates
[i
].ieee
& 0x1) ? ".5" : "");
7934 static DEVICE_ATTR(rate
, S_IRUSR
, show_rate
, NULL
);
7936 static ssize_t
store_retry_rate(struct device
*d
,
7937 struct device_attribute
*attr
,
7938 const char *buf
, size_t count
)
7940 struct iwl_priv
*priv
= dev_get_drvdata(d
);
7942 priv
->retry_rate
= simple_strtoul(buf
, NULL
, 0);
7943 if (priv
->retry_rate
<= 0)
7944 priv
->retry_rate
= 1;
7949 static ssize_t
show_retry_rate(struct device
*d
,
7950 struct device_attribute
*attr
, char *buf
)
7952 struct iwl_priv
*priv
= dev_get_drvdata(d
);
7953 return sprintf(buf
, "%d", priv
->retry_rate
);
7956 static DEVICE_ATTR(retry_rate
, S_IWUSR
| S_IRUSR
, show_retry_rate
,
7959 static ssize_t
store_power_level(struct device
*d
,
7960 struct device_attribute
*attr
,
7961 const char *buf
, size_t count
)
7963 struct iwl_priv
*priv
= dev_get_drvdata(d
);
7967 mode
= simple_strtoul(buf
, NULL
, 0);
7968 mutex_lock(&priv
->mutex
);
7970 if (!iwl_is_ready(priv
)) {
7975 if ((mode
< 1) || (mode
> IWL_POWER_LIMIT
) || (mode
== IWL_POWER_AC
))
7976 mode
= IWL_POWER_AC
;
7978 mode
|= IWL_POWER_ENABLED
;
7980 if (mode
!= priv
->power_mode
) {
7981 rc
= iwl_send_power_mode(priv
, IWL_POWER_LEVEL(mode
));
7983 IWL_DEBUG_MAC80211("failed setting power mode.\n");
7986 priv
->power_mode
= mode
;
7992 mutex_unlock(&priv
->mutex
);
7996 #define MAX_WX_STRING 80
7998 /* Values are in microsecond */
7999 static const s32 timeout_duration
[] = {
8006 static const s32 period_duration
[] = {
8014 static ssize_t
show_power_level(struct device
*d
,
8015 struct device_attribute
*attr
, char *buf
)
8017 struct iwl_priv
*priv
= dev_get_drvdata(d
);
8018 int level
= IWL_POWER_LEVEL(priv
->power_mode
);
8021 p
+= sprintf(p
, "%d ", level
);
8023 case IWL_POWER_MODE_CAM
:
8025 p
+= sprintf(p
, "(AC)");
8027 case IWL_POWER_BATTERY
:
8028 p
+= sprintf(p
, "(BATTERY)");
8032 "(Timeout %dms, Period %dms)",
8033 timeout_duration
[level
- 1] / 1000,
8034 period_duration
[level
- 1] / 1000);
8037 if (!(priv
->power_mode
& IWL_POWER_ENABLED
))
8038 p
+= sprintf(p
, " OFF\n");
8040 p
+= sprintf(p
, " \n");
8042 return (p
- buf
+ 1);
8046 static DEVICE_ATTR(power_level
, S_IWUSR
| S_IRUSR
, show_power_level
,
8049 static ssize_t
show_channels(struct device
*d
,
8050 struct device_attribute
*attr
, char *buf
)
8052 struct iwl_priv
*priv
= dev_get_drvdata(d
);
8054 struct ieee80211_channel
*channels
= NULL
;
8055 const struct ieee80211_hw_mode
*hw_mode
= NULL
;
8058 if (!iwl_is_ready(priv
))
8061 hw_mode
= iwl_get_hw_mode(priv
, MODE_IEEE80211G
);
8063 hw_mode
= iwl_get_hw_mode(priv
, MODE_IEEE80211B
);
8065 channels
= hw_mode
->channels
;
8066 count
= hw_mode
->num_channels
;
8071 "Displaying %d channels in 2.4GHz band "
8072 "(802.11bg):\n", count
);
8074 for (i
= 0; i
< count
; i
++)
8075 len
+= sprintf(&buf
[len
], "%d: %ddBm: BSS%s%s, %s.\n",
8077 channels
[i
].power_level
,
8079 flag
& IEEE80211_CHAN_W_RADAR_DETECT
?
8080 " (IEEE 802.11h required)" : "",
8081 (!(channels
[i
].flag
& IEEE80211_CHAN_W_IBSS
)
8084 IEEE80211_CHAN_W_RADAR_DETECT
)) ? "" :
8087 flag
& IEEE80211_CHAN_W_ACTIVE_SCAN
?
8088 "active/passive" : "passive only");
8090 hw_mode
= iwl_get_hw_mode(priv
, MODE_IEEE80211A
);
8092 channels
= hw_mode
->channels
;
8093 count
= hw_mode
->num_channels
;
8099 len
+= sprintf(&buf
[len
], "Displaying %d channels in 5.2GHz band "
8100 "(802.11a):\n", count
);
8102 for (i
= 0; i
< count
; i
++)
8103 len
+= sprintf(&buf
[len
], "%d: %ddBm: BSS%s%s, %s.\n",
8105 channels
[i
].power_level
,
8107 flag
& IEEE80211_CHAN_W_RADAR_DETECT
?
8108 " (IEEE 802.11h required)" : "",
8109 (!(channels
[i
].flag
& IEEE80211_CHAN_W_IBSS
)
8112 IEEE80211_CHAN_W_RADAR_DETECT
)) ? "" :
8115 flag
& IEEE80211_CHAN_W_ACTIVE_SCAN
?
8116 "active/passive" : "passive only");
8121 static DEVICE_ATTR(channels
, S_IRUSR
, show_channels
, NULL
);
8123 static ssize_t
show_statistics(struct device
*d
,
8124 struct device_attribute
*attr
, char *buf
)
8126 struct iwl_priv
*priv
= dev_get_drvdata(d
);
8127 u32 size
= sizeof(struct iwl_notif_statistics
);
8128 u32 len
= 0, ofs
= 0;
8129 u8
*data
= (u8
*) & priv
->statistics
;
8132 if (!iwl_is_alive(priv
))
8135 mutex_lock(&priv
->mutex
);
8136 rc
= iwl_send_statistics_request(priv
);
8137 mutex_unlock(&priv
->mutex
);
8141 "Error sending statistics request: 0x%08X\n", rc
);
8145 while (size
&& (PAGE_SIZE
- len
)) {
8146 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
8147 PAGE_SIZE
- len
, 1);
8149 if (PAGE_SIZE
- len
)
8153 size
-= min(size
, 16U);
8159 static DEVICE_ATTR(statistics
, S_IRUGO
, show_statistics
, NULL
);
8161 static ssize_t
show_antenna(struct device
*d
,
8162 struct device_attribute
*attr
, char *buf
)
8164 struct iwl_priv
*priv
= dev_get_drvdata(d
);
8166 if (!iwl_is_alive(priv
))
8169 return sprintf(buf
, "%d\n", priv
->antenna
);
8172 static ssize_t
store_antenna(struct device
*d
,
8173 struct device_attribute
*attr
,
8174 const char *buf
, size_t count
)
8177 struct iwl_priv
*priv
= dev_get_drvdata(d
);
8182 if (sscanf(buf
, "%1i", &ant
) != 1) {
8183 IWL_DEBUG_INFO("not in hex or decimal form.\n");
8187 if ((ant
>= 0) && (ant
<= 2)) {
8188 IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant
);
8189 priv
->antenna
= (enum iwl_antenna
)ant
;
8191 IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant
);
8197 static DEVICE_ATTR(antenna
, S_IWUSR
| S_IRUGO
, show_antenna
, store_antenna
);
8199 static ssize_t
show_status(struct device
*d
,
8200 struct device_attribute
*attr
, char *buf
)
8202 struct iwl_priv
*priv
= (struct iwl_priv
*)d
->driver_data
;
8203 if (!iwl_is_alive(priv
))
8205 return sprintf(buf
, "0x%08x\n", (int)priv
->status
);
8208 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
8210 static ssize_t
dump_error_log(struct device
*d
,
8211 struct device_attribute
*attr
,
8212 const char *buf
, size_t count
)
8214 char *p
= (char *)buf
;
8217 iwl_dump_nic_error_log((struct iwl_priv
*)d
->driver_data
);
8219 return strnlen(buf
, count
);
8222 static DEVICE_ATTR(dump_errors
, S_IWUSR
, NULL
, dump_error_log
);
8224 static ssize_t
dump_event_log(struct device
*d
,
8225 struct device_attribute
*attr
,
8226 const char *buf
, size_t count
)
8228 char *p
= (char *)buf
;
8231 iwl_dump_nic_event_log((struct iwl_priv
*)d
->driver_data
);
8233 return strnlen(buf
, count
);
8236 static DEVICE_ATTR(dump_events
, S_IWUSR
, NULL
, dump_event_log
);
8238 /*****************************************************************************
8240 * driver setup and teardown
8242 *****************************************************************************/
8244 static void iwl_setup_deferred_work(struct iwl_priv
*priv
)
8246 priv
->workqueue
= create_workqueue(DRV_NAME
);
8248 init_waitqueue_head(&priv
->wait_command_queue
);
8250 INIT_WORK(&priv
->up
, iwl_bg_up
);
8251 INIT_WORK(&priv
->restart
, iwl_bg_restart
);
8252 INIT_WORK(&priv
->rx_replenish
, iwl_bg_rx_replenish
);
8253 INIT_WORK(&priv
->scan_completed
, iwl_bg_scan_completed
);
8254 INIT_WORK(&priv
->request_scan
, iwl_bg_request_scan
);
8255 INIT_WORK(&priv
->abort_scan
, iwl_bg_abort_scan
);
8256 INIT_WORK(&priv
->rf_kill
, iwl_bg_rf_kill
);
8257 INIT_WORK(&priv
->beacon_update
, iwl_bg_beacon_update
);
8258 INIT_DELAYED_WORK(&priv
->post_associate
, iwl_bg_post_associate
);
8259 INIT_DELAYED_WORK(&priv
->init_alive_start
, iwl_bg_init_alive_start
);
8260 INIT_DELAYED_WORK(&priv
->alive_start
, iwl_bg_alive_start
);
8261 INIT_DELAYED_WORK(&priv
->scan_check
, iwl_bg_scan_check
);
8263 iwl_hw_setup_deferred_work(priv
);
8265 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
8266 iwl_irq_tasklet
, (unsigned long)priv
);
8269 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
)
8271 iwl_hw_cancel_deferred_work(priv
);
8273 cancel_delayed_work(&priv
->scan_check
);
8274 cancel_delayed_work(&priv
->alive_start
);
8275 cancel_delayed_work(&priv
->post_associate
);
8276 cancel_work_sync(&priv
->beacon_update
);
8279 static struct attribute
*iwl_sysfs_entries
[] = {
8280 &dev_attr_antenna
.attr
,
8281 &dev_attr_channels
.attr
,
8282 &dev_attr_dump_errors
.attr
,
8283 &dev_attr_dump_events
.attr
,
8284 &dev_attr_flags
.attr
,
8285 &dev_attr_filter_flags
.attr
,
8286 #ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT
8287 &dev_attr_measurement
.attr
,
8289 &dev_attr_power_level
.attr
,
8290 &dev_attr_rate
.attr
,
8291 &dev_attr_retry_rate
.attr
,
8292 &dev_attr_rf_kill
.attr
,
8293 &dev_attr_rs_window
.attr
,
8294 &dev_attr_statistics
.attr
,
8295 &dev_attr_status
.attr
,
8296 &dev_attr_temperature
.attr
,
8297 &dev_attr_tune
.attr
,
8298 &dev_attr_tx_power
.attr
,
8303 static struct attribute_group iwl_attribute_group
= {
8304 .name
= NULL
, /* put in device directory */
8305 .attrs
= iwl_sysfs_entries
,
8308 static struct ieee80211_ops iwl_hw_ops
= {
8310 .start
= iwl_mac_start
,
8311 .stop
= iwl_mac_stop
,
8312 .add_interface
= iwl_mac_add_interface
,
8313 .remove_interface
= iwl_mac_remove_interface
,
8314 .config
= iwl_mac_config
,
8315 .config_interface
= iwl_mac_config_interface
,
8316 .configure_filter
= iwl_configure_filter
,
8317 .set_key
= iwl_mac_set_key
,
8318 .get_stats
= iwl_mac_get_stats
,
8319 .get_tx_stats
= iwl_mac_get_tx_stats
,
8320 .conf_tx
= iwl_mac_conf_tx
,
8321 .get_tsf
= iwl_mac_get_tsf
,
8322 .reset_tsf
= iwl_mac_reset_tsf
,
8323 .beacon_update
= iwl_mac_beacon_update
,
8324 .hw_scan
= iwl_mac_hw_scan
8327 static int iwl_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
8331 struct iwl_priv
*priv
;
8332 struct ieee80211_hw
*hw
;
8335 if (iwl_param_disable_hw_scan
) {
8336 IWL_DEBUG_INFO("Disabling hw_scan\n");
8337 iwl_hw_ops
.hw_scan
= NULL
;
8340 if ((iwl_param_queues_num
> IWL_MAX_NUM_QUEUES
) ||
8341 (iwl_param_queues_num
< IWL_MIN_NUM_QUEUES
)) {
8342 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
8343 IWL_MIN_NUM_QUEUES
, IWL_MAX_NUM_QUEUES
);
8348 /* mac80211 allocates memory for this device instance, including
8349 * space for this driver's private structure */
8350 hw
= ieee80211_alloc_hw(sizeof(struct iwl_priv
), &iwl_hw_ops
);
8352 IWL_ERROR("Can not allocate network device\n");
8356 SET_IEEE80211_DEV(hw
, &pdev
->dev
);
8358 hw
->rate_control_algorithm
= "iwl-3945-rs";
8360 IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
8364 priv
->pci_dev
= pdev
;
8365 priv
->antenna
= (enum iwl_antenna
)iwl_param_antenna
;
8366 #ifdef CONFIG_IWLWIFI_DEBUG
8367 iwl_debug_level
= iwl_param_debug
;
8368 atomic_set(&priv
->restrict_refcnt
, 0);
8370 priv
->retry_rate
= 1;
8372 priv
->ibss_beacon
= NULL
;
8374 /* Tell mac80211 and its clients (e.g. Wireless Extensions)
8375 * the range of signal quality values that we'll provide.
8376 * Negative values for level/noise indicate that we'll provide dBm.
8377 * For WE, at least, non-0 values here *enable* display of values
8378 * in app (iwconfig). */
8379 hw
->max_rssi
= -20; /* signal level, negative indicates dBm */
8380 hw
->max_noise
= -20; /* noise level, negative indicates dBm */
8381 hw
->max_signal
= 100; /* link quality indication (%) */
8383 /* Tell mac80211 our Tx characteristics */
8384 hw
->flags
= IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE
;
8388 spin_lock_init(&priv
->lock
);
8389 spin_lock_init(&priv
->power_data
.lock
);
8390 spin_lock_init(&priv
->sta_lock
);
8391 spin_lock_init(&priv
->hcmd_lock
);
8393 for (i
= 0; i
< IWL_IBSS_MAC_HASH_SIZE
; i
++)
8394 INIT_LIST_HEAD(&priv
->ibss_mac_hash
[i
]);
8396 INIT_LIST_HEAD(&priv
->free_frames
);
8398 mutex_init(&priv
->mutex
);
8399 if (pci_enable_device(pdev
)) {
8401 goto out_ieee80211_free_hw
;
8404 pci_set_master(pdev
);
8406 iwl_clear_stations_table(priv
);
8408 priv
->data_retry_limit
= -1;
8409 priv
->ieee_channels
= NULL
;
8410 priv
->ieee_rates
= NULL
;
8413 err
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
8415 err
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
8417 printk(KERN_WARNING DRV_NAME
": No suitable DMA available.\n");
8418 goto out_pci_disable_device
;
8421 pci_set_drvdata(pdev
, priv
);
8422 err
= pci_request_regions(pdev
, DRV_NAME
);
8424 goto out_pci_disable_device
;
8425 /* We disable the RETRY_TIMEOUT register (0x41) to keep
8426 * PCI Tx retries from interfering with C3 CPU state */
8427 pci_write_config_byte(pdev
, 0x41, 0x00);
8428 priv
->hw_base
= pci_iomap(pdev
, 0, 0);
8429 if (!priv
->hw_base
) {
8431 goto out_pci_release_regions
;
8434 IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
8435 (unsigned long long) pci_resource_len(pdev
, 0));
8436 IWL_DEBUG_INFO("pci_resource_base = %p\n", priv
->hw_base
);
8438 /* Initialize module parameter values here */
8440 if (iwl_param_disable
) {
8441 set_bit(STATUS_RF_KILL_SW
, &priv
->status
);
8442 IWL_DEBUG_INFO("Radio disabled.\n");
8445 priv
->iw_mode
= IEEE80211_IF_TYPE_STA
;
8448 (priv
->pci_dev
->device
<< 16) | priv
->pci_dev
->subsystem_device
;
8451 case 0x42221005: /* 0x4222 0x8086 0x1005 is BG SKU */
8452 case 0x42221034: /* 0x4222 0x8086 0x1034 is BG SKU */
8453 case 0x42271014: /* 0x4227 0x8086 0x1014 is BG SKU */
8454 case 0x42221044: /* 0x4222 0x8086 0x1044 is BG SKU */
8459 * Rest are assumed ABG SKU -- if this is not the
8460 * case then the card will get the wrong 'Detected'
8461 * line in the kernel log however the code that
8462 * initializes the GEO table will detect no A-band
8463 * channels and remove the is_abg mask.
8470 printk(KERN_INFO DRV_NAME
8471 ": Detected Intel PRO/Wireless 3945%sBG Network Connection\n",
8472 priv
->is_abg
? "A" : "");
8474 /* Device-specific setup */
8475 if (iwl_hw_set_hw_setting(priv
)) {
8476 IWL_ERROR("failed to set hw settings\n");
8477 mutex_unlock(&priv
->mutex
);
8481 #ifdef CONFIG_IWLWIFI_QOS
8482 if (iwl_param_qos_enable
)
8483 priv
->qos_data
.qos_enable
= 1;
8485 iwl_reset_qos(priv
);
8487 priv
->qos_data
.qos_active
= 0;
8488 priv
->qos_data
.qos_cap
.val
= 0;
8489 #endif /* CONFIG_IWLWIFI_QOS */
8491 iwl_set_rxon_channel(priv
, MODE_IEEE80211G
, 6);
8492 iwl_setup_deferred_work(priv
);
8493 iwl_setup_rx_handlers(priv
);
8495 priv
->rates_mask
= IWL_RATES_MASK
;
8496 /* If power management is turned on, default to AC mode */
8497 priv
->power_mode
= IWL_POWER_AC
;
8498 priv
->user_txpower_limit
= IWL_DEFAULT_TX_POWER
;
8500 pci_enable_msi(pdev
);
8502 err
= request_irq(pdev
->irq
, iwl_isr
, IRQF_SHARED
, DRV_NAME
, priv
);
8504 IWL_ERROR("Error allocating IRQ %d\n", pdev
->irq
);
8505 goto out_disable_msi
;
8508 mutex_lock(&priv
->mutex
);
8510 err
= sysfs_create_group(&pdev
->dev
.kobj
, &iwl_attribute_group
);
8512 IWL_ERROR("failed to create sysfs device attributes\n");
8513 mutex_unlock(&priv
->mutex
);
8514 goto out_release_irq
;
8517 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
8518 * ucode filename and max sizes are card-specific. */
8519 err
= iwl_read_ucode(priv
);
8521 IWL_ERROR("Could not read microcode: %d\n", err
);
8522 mutex_unlock(&priv
->mutex
);
8526 mutex_unlock(&priv
->mutex
);
8528 IWL_DEBUG_INFO("Queing UP work.\n");
8530 queue_work(priv
->workqueue
, &priv
->up
);
8535 iwl_dealloc_ucode_pci(priv
);
8537 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl_attribute_group
);
8540 free_irq(pdev
->irq
, priv
);
8543 pci_disable_msi(pdev
);
8544 destroy_workqueue(priv
->workqueue
);
8545 priv
->workqueue
= NULL
;
8546 iwl_unset_hw_setting(priv
);
8549 pci_iounmap(pdev
, priv
->hw_base
);
8550 out_pci_release_regions
:
8551 pci_release_regions(pdev
);
8552 out_pci_disable_device
:
8553 pci_disable_device(pdev
);
8554 pci_set_drvdata(pdev
, NULL
);
8555 out_ieee80211_free_hw
:
8556 ieee80211_free_hw(priv
->hw
);
8561 static void iwl_pci_remove(struct pci_dev
*pdev
)
8563 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
8564 struct list_head
*p
, *q
;
8570 IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
8572 mutex_lock(&priv
->mutex
);
8573 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
8575 mutex_unlock(&priv
->mutex
);
8577 /* Free MAC hash list for ADHOC */
8578 for (i
= 0; i
< IWL_IBSS_MAC_HASH_SIZE
; i
++) {
8579 list_for_each_safe(p
, q
, &priv
->ibss_mac_hash
[i
]) {
8581 kfree(list_entry(p
, struct iwl_ibss_seq
, list
));
8585 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl_attribute_group
);
8587 iwl_dealloc_ucode_pci(priv
);
8590 iwl_rx_queue_free(priv
, &priv
->rxq
);
8591 iwl_hw_txq_ctx_free(priv
);
8593 iwl_unset_hw_setting(priv
);
8594 iwl_clear_stations_table(priv
);
8596 if (priv
->mac80211_registered
) {
8597 ieee80211_unregister_hw(priv
->hw
);
8598 iwl_rate_control_unregister(priv
->hw
);
8601 /*netif_stop_queue(dev); */
8602 flush_workqueue(priv
->workqueue
);
8604 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
8605 * priv->workqueue... so we can't take down the workqueue
8607 destroy_workqueue(priv
->workqueue
);
8608 priv
->workqueue
= NULL
;
8610 free_irq(pdev
->irq
, priv
);
8611 pci_disable_msi(pdev
);
8612 pci_iounmap(pdev
, priv
->hw_base
);
8613 pci_release_regions(pdev
);
8614 pci_disable_device(pdev
);
8615 pci_set_drvdata(pdev
, NULL
);
8617 kfree(priv
->channel_info
);
8619 kfree(priv
->ieee_channels
);
8620 kfree(priv
->ieee_rates
);
8622 if (priv
->ibss_beacon
)
8623 dev_kfree_skb(priv
->ibss_beacon
);
8625 ieee80211_free_hw(priv
->hw
);
8630 static int iwl_pci_suspend(struct pci_dev
*pdev
, pm_message_t state
)
8632 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
8634 mutex_lock(&priv
->mutex
);
8636 set_bit(STATUS_IN_SUSPEND
, &priv
->status
);
8638 /* Take down the device; powers it off, etc. */
8641 if (priv
->mac80211_registered
)
8642 ieee80211_stop_queues(priv
->hw
);
8644 pci_save_state(pdev
);
8645 pci_disable_device(pdev
);
8646 pci_set_power_state(pdev
, PCI_D3hot
);
8648 mutex_unlock(&priv
->mutex
);
8653 static void iwl_resume(struct iwl_priv
*priv
)
8655 unsigned long flags
;
8657 /* The following it a temporary work around due to the
8658 * suspend / resume not fully initializing the NIC correctly.
8659 * Without all of the following, resume will not attempt to take
8660 * down the NIC (it shouldn't really need to) and will just try
8661 * and bring the NIC back up. However that fails during the
8662 * ucode verification process. This then causes iwl_down to be
8663 * called *after* iwl_hw_nic_init() has succeeded -- which
8664 * then lets the next init sequence succeed. So, we've
8665 * replicated all of that NIC init code here... */
8667 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
8669 iwl_hw_nic_init(priv
);
8671 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
8672 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
8673 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
8674 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
8675 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
8676 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
8678 /* tell the device to stop sending interrupts */
8679 iwl_disable_interrupts(priv
);
8681 spin_lock_irqsave(&priv
->lock
, flags
);
8682 iwl_clear_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
8684 if (!iwl_grab_restricted_access(priv
)) {
8685 iwl_write_restricted_reg(priv
, APMG_CLK_DIS_REG
,
8686 APMG_CLK_VAL_DMA_CLK_RQT
);
8687 iwl_release_restricted_access(priv
);
8689 spin_unlock_irqrestore(&priv
->lock
, flags
);
8693 iwl_hw_nic_reset(priv
);
8695 /* Bring the device back up */
8696 clear_bit(STATUS_IN_SUSPEND
, &priv
->status
);
8697 queue_work(priv
->workqueue
, &priv
->up
);
8700 static int iwl_pci_resume(struct pci_dev
*pdev
)
8702 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
8705 printk(KERN_INFO
"Coming out of suspend...\n");
8707 mutex_lock(&priv
->mutex
);
8709 pci_set_power_state(pdev
, PCI_D0
);
8710 err
= pci_enable_device(pdev
);
8711 pci_restore_state(pdev
);
8714 * Suspend/Resume resets the PCI configuration space, so we have to
8715 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
8716 * from interfering with C3 CPU state. pci_restore_state won't help
8717 * here since it only restores the first 64 bytes pci config header.
8719 pci_write_config_byte(pdev
, 0x41, 0x00);
8722 mutex_unlock(&priv
->mutex
);
8727 #endif /* CONFIG_PM */
8729 /*****************************************************************************
8731 * driver and module entry point
8733 *****************************************************************************/
8735 static struct pci_driver iwl_driver
= {
8737 .id_table
= iwl_hw_card_ids
,
8738 .probe
= iwl_pci_probe
,
8739 .remove
= __devexit_p(iwl_pci_remove
),
8741 .suspend
= iwl_pci_suspend
,
8742 .resume
= iwl_pci_resume
,
8746 static int __init
iwl_init(void)
8750 printk(KERN_INFO DRV_NAME
": " DRV_DESCRIPTION
", " DRV_VERSION
"\n");
8751 printk(KERN_INFO DRV_NAME
": " DRV_COPYRIGHT
"\n");
8752 ret
= pci_register_driver(&iwl_driver
);
8754 IWL_ERROR("Unable to initialize PCI module\n");
8757 #ifdef CONFIG_IWLWIFI_DEBUG
8758 ret
= driver_create_file(&iwl_driver
.driver
, &driver_attr_debug_level
);
8760 IWL_ERROR("Unable to create driver sysfs file\n");
8761 pci_unregister_driver(&iwl_driver
);
8769 static void __exit
iwl_exit(void)
8771 #ifdef CONFIG_IWLWIFI_DEBUG
8772 driver_remove_file(&iwl_driver
.driver
, &driver_attr_debug_level
);
8774 pci_unregister_driver(&iwl_driver
);
8777 module_param_named(antenna
, iwl_param_antenna
, int, 0444);
8778 MODULE_PARM_DESC(antenna
, "select antenna (1=Main, 2=Aux, default 0 [both])");
8779 module_param_named(disable
, iwl_param_disable
, int, 0444);
8780 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
8781 module_param_named(hwcrypto
, iwl_param_hwcrypto
, int, 0444);
8782 MODULE_PARM_DESC(hwcrypto
,
8783 "using hardware crypto engine (default 0 [software])\n");
8784 module_param_named(debug
, iwl_param_debug
, int, 0444);
8785 MODULE_PARM_DESC(debug
, "debug output mask");
8786 module_param_named(disable_hw_scan
, iwl_param_disable_hw_scan
, int, 0444);
8787 MODULE_PARM_DESC(disable_hw_scan
, "disable hardware scanning (default 0)");
8789 module_param_named(queues_num
, iwl_param_queues_num
, int, 0444);
8790 MODULE_PARM_DESC(queues_num
, "number of hw queues.");
8793 module_param_named(qos_enable
, iwl_param_qos_enable
, int, 0444);
8794 MODULE_PARM_DESC(qos_enable
, "enable all QoS functionality");
8796 module_exit(iwl_exit
);
8797 module_init(iwl_init
);