2 * Copyright (C) 2002 Intersil Americas Inc.
3 * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
13 * You should have received a copy of the GNU General Public License
14 * along with this program; if not, write to the Free Software
15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 #include <linux/module.h>
21 #include <linux/pci.h>
22 #include <linux/delay.h>
23 #include <linux/netdevice.h>
24 #include <linux/etherdevice.h>
25 #include <linux/if_arp.h>
27 #include "prismcompat.h"
29 #include "islpci_eth.h"
30 #include "islpci_mgt.h"
33 /******************************************************************************
34 Network Interface functions
35 ******************************************************************************/
37 islpci_eth_cleanup_transmit(islpci_private
*priv
,
38 isl38xx_control_block
*control_block
)
43 /* compare the control block read pointer with the free pointer */
44 while (priv
->free_data_tx
!=
45 le32_to_cpu(control_block
->
46 device_curr_frag
[ISL38XX_CB_TX_DATA_LQ
])) {
47 /* read the index of the first fragment to be freed */
48 index
= priv
->free_data_tx
% ISL38XX_CB_TX_QSIZE
;
50 /* check for holes in the arrays caused by multi fragment frames
51 * searching for the last fragment of a frame */
52 if (priv
->pci_map_tx_address
[index
] != (dma_addr_t
) NULL
) {
53 /* entry is the last fragment of a frame
54 * free the skb structure and unmap pci memory */
55 skb
= priv
->data_low_tx
[index
];
57 #if VERBOSE > SHOW_ERROR_MESSAGES
59 "cleanup skb %p skb->data %p skb->len %u truesize %u\n ",
60 skb
, skb
->data
, skb
->len
, skb
->truesize
);
63 pci_unmap_single(priv
->pdev
,
64 priv
->pci_map_tx_address
[index
],
65 skb
->len
, PCI_DMA_TODEVICE
);
66 dev_kfree_skb_irq(skb
);
69 /* increment the free data low queue pointer */
75 islpci_eth_transmit(struct sk_buff
*skb
, struct net_device
*ndev
)
77 islpci_private
*priv
= netdev_priv(ndev
);
78 isl38xx_control_block
*cb
= priv
->control_block
;
80 dma_addr_t pci_map_address
;
82 isl38xx_fragment
*fragment
;
84 struct sk_buff
*newskb
;
87 unsigned char wds_mac
[6];
91 #if VERBOSE > SHOW_ERROR_MESSAGES
92 DEBUG(SHOW_FUNCTION_CALLS
, "islpci_eth_transmit \n");
95 /* lock the driver code */
96 spin_lock_irqsave(&priv
->slock
, flags
);
98 /* check whether the destination queue has enough fragments for the frame */
99 curr_frag
= le32_to_cpu(cb
->driver_curr_frag
[ISL38XX_CB_TX_DATA_LQ
]);
100 if (unlikely(curr_frag
- priv
->free_data_tx
>= ISL38XX_CB_TX_QSIZE
)) {
101 printk(KERN_ERR
"%s: transmit device queue full when awake\n",
103 netif_stop_queue(ndev
);
105 /* trigger the device */
106 isl38xx_w32_flush(priv
->device_base
, ISL38XX_DEV_INT_UPDATE
,
107 ISL38XX_DEV_INT_REG
);
108 udelay(ISL38XX_WRITEIO_DELAY
);
113 /* Check alignment and WDS frame formatting. The start of the packet should
114 * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
115 * and add WDS address information */
116 if (likely(((long) skb
->data
& 0x03) | init_wds
)) {
117 /* get the number of bytes to add and re-allign */
118 offset
= (4 - (long) skb
->data
) & 0x03;
119 offset
+= init_wds
? 6 : 0;
121 /* check whether the current skb can be used */
122 if (!skb_cloned(skb
) && (skb_tailroom(skb
) >= offset
)) {
123 unsigned char *src
= skb
->data
;
125 #if VERBOSE > SHOW_ERROR_MESSAGES
126 DEBUG(SHOW_TRACING
, "skb offset %i wds %i\n", offset
,
130 /* align the buffer on 4-byte boundary */
131 skb_reserve(skb
, (4 - (long) skb
->data
) & 0x03);
133 /* wds requires an additional address field of 6 bytes */
135 #ifdef ISLPCI_ETH_DEBUG
136 printk("islpci_eth_transmit:wds_mac\n");
138 memmove(skb
->data
+ 6, src
, skb
->len
);
139 skb_copy_to_linear_data(skb
, wds_mac
, 6);
141 memmove(skb
->data
, src
, skb
->len
);
144 #if VERBOSE > SHOW_ERROR_MESSAGES
145 DEBUG(SHOW_TRACING
, "memmove %p %p %i \n", skb
->data
,
150 dev_alloc_skb(init_wds
? skb
->len
+ 6 : skb
->len
);
151 if (unlikely(newskb
== NULL
)) {
152 printk(KERN_ERR
"%s: Cannot allocate skb\n",
157 newskb_offset
= (4 - (long) newskb
->data
) & 0x03;
159 /* Check if newskb->data is aligned */
161 skb_reserve(newskb
, newskb_offset
);
163 skb_put(newskb
, init_wds
? skb
->len
+ 6 : skb
->len
);
165 skb_copy_from_linear_data(skb
,
168 skb_copy_to_linear_data(newskb
, wds_mac
, 6);
169 #ifdef ISLPCI_ETH_DEBUG
170 printk("islpci_eth_transmit:wds_mac\n");
173 skb_copy_from_linear_data(skb
, newskb
->data
,
176 #if VERBOSE > SHOW_ERROR_MESSAGES
177 DEBUG(SHOW_TRACING
, "memcpy %p %p %i wds %i\n",
178 newskb
->data
, skb
->data
, skb
->len
, init_wds
);
181 newskb
->dev
= skb
->dev
;
182 dev_kfree_skb_irq(skb
);
186 /* display the buffer contents for debugging */
187 #if VERBOSE > SHOW_ERROR_MESSAGES
188 DEBUG(SHOW_BUFFER_CONTENTS
, "\ntx %p ", skb
->data
);
189 display_buffer((char *) skb
->data
, skb
->len
);
192 /* map the skb buffer to pci memory for DMA operation */
193 pci_map_address
= pci_map_single(priv
->pdev
,
194 (void *) skb
->data
, skb
->len
,
196 if (unlikely(pci_map_address
== 0)) {
197 printk(KERN_WARNING
"%s: cannot map buffer to PCI\n",
203 /* Place the fragment in the control block structure. */
204 index
= curr_frag
% ISL38XX_CB_TX_QSIZE
;
205 fragment
= &cb
->tx_data_low
[index
];
207 priv
->pci_map_tx_address
[index
] = pci_map_address
;
208 /* store the skb address for future freeing */
209 priv
->data_low_tx
[index
] = skb
;
210 /* set the proper fragment start address and size information */
211 frame_size
= skb
->len
;
212 fragment
->size
= cpu_to_le16(frame_size
);
213 fragment
->flags
= cpu_to_le16(0); /* set to 1 if more fragments */
214 fragment
->address
= cpu_to_le32(pci_map_address
);
217 /* The fragment address in the control block must have been
218 * written before announcing the frame buffer to device. */
220 cb
->driver_curr_frag
[ISL38XX_CB_TX_DATA_LQ
] = cpu_to_le32(curr_frag
);
222 if (curr_frag
- priv
->free_data_tx
+ ISL38XX_MIN_QTHRESHOLD
223 > ISL38XX_CB_TX_QSIZE
) {
224 /* stop sends from upper layers */
225 netif_stop_queue(ndev
);
227 /* set the full flag for the transmission queue */
228 priv
->data_low_tx_full
= 1;
231 /* set the transmission time */
232 ndev
->trans_start
= jiffies
;
233 priv
->statistics
.tx_packets
++;
234 priv
->statistics
.tx_bytes
+= skb
->len
;
236 /* trigger the device */
237 islpci_trigger(priv
);
239 /* unlock the driver code */
240 spin_unlock_irqrestore(&priv
->slock
, flags
);
245 priv
->statistics
.tx_dropped
++;
246 spin_unlock_irqrestore(&priv
->slock
, flags
);
252 islpci_monitor_rx(islpci_private
*priv
, struct sk_buff
**skb
)
254 /* The card reports full 802.11 packets but with a 20 bytes
255 * header and without the FCS. But there a is a bit that
256 * indicates if the packet is corrupted :-) */
257 struct rfmon_header
*hdr
= (struct rfmon_header
*) (*skb
)->data
;
259 if (hdr
->flags
& 0x01)
260 /* This one is bad. Drop it ! */
262 if (priv
->ndev
->type
== ARPHRD_IEEE80211_PRISM
) {
263 struct avs_80211_1_header
*avs
;
264 /* extract the relevant data from the header */
265 u32 clock
= le32_to_cpu(hdr
->clock
);
267 u16 freq
= le16_to_cpu(hdr
->freq
);
270 skb_pull(*skb
, sizeof (struct rfmon_header
));
272 if (skb_headroom(*skb
) < sizeof (struct avs_80211_1_header
)) {
273 struct sk_buff
*newskb
= skb_copy_expand(*skb
,
278 dev_kfree_skb_irq(*skb
);
282 /* This behavior is not very subtile... */
285 /* make room for the new header and fill it. */
287 (struct avs_80211_1_header
*) skb_push(*skb
,
289 avs_80211_1_header
));
291 avs
->version
= cpu_to_be32(P80211CAPTURE_VERSION
);
292 avs
->length
= cpu_to_be32(sizeof (struct avs_80211_1_header
));
293 avs
->mactime
= cpu_to_be64(le64_to_cpu(clock
));
294 avs
->hosttime
= cpu_to_be64(jiffies
);
295 avs
->phytype
= cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */
296 avs
->channel
= cpu_to_be32(channel_of_freq(freq
));
297 avs
->datarate
= cpu_to_be32(rate
* 5);
298 avs
->antenna
= cpu_to_be32(0); /*unknown */
299 avs
->priority
= cpu_to_be32(0); /*unknown */
300 avs
->ssi_type
= cpu_to_be32(3); /*2: dBm, 3: raw RSSI */
301 avs
->ssi_signal
= cpu_to_be32(rssi
& 0x7f);
302 avs
->ssi_noise
= cpu_to_be32(priv
->local_iwstatistics
.qual
.noise
); /*better than 'undefined', I assume */
303 avs
->preamble
= cpu_to_be32(0); /*unknown */
304 avs
->encoding
= cpu_to_be32(0); /*unknown */
306 skb_pull(*skb
, sizeof (struct rfmon_header
));
308 (*skb
)->protocol
= htons(ETH_P_802_2
);
309 skb_reset_mac_header(*skb
);
310 (*skb
)->pkt_type
= PACKET_OTHERHOST
;
316 islpci_eth_receive(islpci_private
*priv
)
318 struct net_device
*ndev
= priv
->ndev
;
319 isl38xx_control_block
*control_block
= priv
->control_block
;
326 #if VERBOSE > SHOW_ERROR_MESSAGES
327 DEBUG(SHOW_FUNCTION_CALLS
, "islpci_eth_receive \n");
330 /* the device has written an Ethernet frame in the data area
331 * of the sk_buff without updating the structure, do it now */
332 index
= priv
->free_data_rx
% ISL38XX_CB_RX_QSIZE
;
333 size
= le16_to_cpu(control_block
->rx_data_low
[index
].size
);
334 skb
= priv
->data_low_rx
[index
];
335 offset
= ((unsigned long)
336 le32_to_cpu(control_block
->rx_data_low
[index
].address
) -
337 (unsigned long) skb
->data
) & 3;
339 #if VERBOSE > SHOW_ERROR_MESSAGES
341 "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ",
342 control_block
->rx_data_low
[priv
->free_data_rx
].address
, skb
->data
,
343 skb
->len
, offset
, skb
->truesize
);
346 /* delete the streaming DMA mapping before processing the skb */
347 pci_unmap_single(priv
->pdev
,
348 priv
->pci_map_rx_address
[index
],
349 MAX_FRAGMENT_SIZE_RX
+ 2, PCI_DMA_FROMDEVICE
);
351 /* update the skb structure and allign the buffer */
354 /* shift the buffer allocation offset bytes to get the right frame */
358 #if VERBOSE > SHOW_ERROR_MESSAGES
359 /* display the buffer contents for debugging */
360 DEBUG(SHOW_BUFFER_CONTENTS
, "\nrx %p ", skb
->data
);
361 display_buffer((char *) skb
->data
, skb
->len
);
364 /* check whether WDS is enabled and whether the data frame is a WDS frame */
367 /* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
369 memmove(skb
->data
, src
, skb
->len
- 6);
370 skb_trim(skb
, skb
->len
- 6);
372 #if VERBOSE > SHOW_ERROR_MESSAGES
373 DEBUG(SHOW_TRACING
, "Fragment size %i in skb at %p\n", size
, skb
);
374 DEBUG(SHOW_TRACING
, "Skb data at %p, length %i\n", skb
->data
, skb
->len
);
376 /* display the buffer contents for debugging */
377 DEBUG(SHOW_BUFFER_CONTENTS
, "\nrx %p ", skb
->data
);
378 display_buffer((char *) skb
->data
, skb
->len
);
380 /* take care of monitor mode and spy monitoring. */
381 if (unlikely(priv
->iw_mode
== IW_MODE_MONITOR
)) {
383 discard
= islpci_monitor_rx(priv
, &skb
);
385 if (unlikely(skb
->data
[2 * ETH_ALEN
] == 0)) {
386 /* The packet has a rx_annex. Read it for spy monitoring, Then
387 * remove it, while keeping the 2 leading MAC addr.
389 struct iw_quality wstats
;
390 struct rx_annex_header
*annex
=
391 (struct rx_annex_header
*) skb
->data
;
392 wstats
.level
= annex
->rfmon
.rssi
;
393 /* The noise value can be a bit outdated if nobody's
394 * reading wireless stats... */
395 wstats
.noise
= priv
->local_iwstatistics
.qual
.noise
;
396 wstats
.qual
= wstats
.level
- wstats
.noise
;
397 wstats
.updated
= 0x07;
398 /* Update spy records */
399 wireless_spy_update(ndev
, annex
->addr2
, &wstats
);
401 skb_copy_from_linear_data(skb
,
403 sizeof(struct rfmon_header
)),
405 skb_pull(skb
, sizeof (struct rfmon_header
));
407 skb
->protocol
= eth_type_trans(skb
, ndev
);
409 skb
->ip_summed
= CHECKSUM_NONE
;
410 priv
->statistics
.rx_packets
++;
411 priv
->statistics
.rx_bytes
+= size
;
413 /* deliver the skb to the network layer */
414 #ifdef ISLPCI_ETH_DEBUG
416 ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
417 skb
->data
[0], skb
->data
[1], skb
->data
[2], skb
->data
[3],
418 skb
->data
[4], skb
->data
[5]);
420 if (unlikely(discard
)) {
421 dev_kfree_skb_irq(skb
);
426 /* increment the read index for the rx data low queue */
427 priv
->free_data_rx
++;
429 /* add one or more sk_buff structures */
431 le32_to_cpu(control_block
->
432 driver_curr_frag
[ISL38XX_CB_RX_DATA_LQ
]),
433 index
- priv
->free_data_rx
< ISL38XX_CB_RX_QSIZE
) {
434 /* allocate an sk_buff for received data frames storage
435 * include any required allignment operations */
436 skb
= dev_alloc_skb(MAX_FRAGMENT_SIZE_RX
+ 2);
437 if (unlikely(skb
== NULL
)) {
438 /* error allocating an sk_buff structure elements */
439 DEBUG(SHOW_ERROR_MESSAGES
, "Error allocating skb \n");
442 skb_reserve(skb
, (4 - (long) skb
->data
) & 0x03);
443 /* store the new skb structure pointer */
444 index
= index
% ISL38XX_CB_RX_QSIZE
;
445 priv
->data_low_rx
[index
] = skb
;
447 #if VERBOSE > SHOW_ERROR_MESSAGES
449 "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ",
450 skb
, skb
->data
, skb
->len
, index
, skb
->truesize
);
453 /* set the streaming DMA mapping for proper PCI bus operation */
454 priv
->pci_map_rx_address
[index
] =
455 pci_map_single(priv
->pdev
, (void *) skb
->data
,
456 MAX_FRAGMENT_SIZE_RX
+ 2,
458 if (unlikely(priv
->pci_map_rx_address
[index
] == (dma_addr_t
) NULL
)) {
459 /* error mapping the buffer to device accessable memory address */
460 DEBUG(SHOW_ERROR_MESSAGES
,
461 "Error mapping DMA address\n");
463 /* free the skbuf structure before aborting */
464 dev_kfree_skb_irq((struct sk_buff
*) skb
);
468 /* update the fragment address */
469 control_block
->rx_data_low
[index
].address
=
470 cpu_to_le32((u32
)priv
->pci_map_rx_address
[index
]);
473 /* increment the driver read pointer */
474 add_le32p((u32
*) &control_block
->
475 driver_curr_frag
[ISL38XX_CB_RX_DATA_LQ
], 1);
478 /* trigger the device */
479 islpci_trigger(priv
);
485 islpci_do_reset_and_wake(struct work_struct
*work
)
487 islpci_private
*priv
= container_of(work
, islpci_private
, reset_task
);
489 islpci_reset(priv
, 1);
490 priv
->reset_task_pending
= 0;
492 netif_wake_queue(priv
->ndev
);
496 islpci_eth_tx_timeout(struct net_device
*ndev
)
498 islpci_private
*priv
= netdev_priv(ndev
);
499 struct net_device_stats
*statistics
= &priv
->statistics
;
501 /* increment the transmit error counter */
502 statistics
->tx_errors
++;
504 if (!priv
->reset_task_pending
) {
506 "%s: tx_timeout, scheduling reset", ndev
->name
);
507 netif_stop_queue(ndev
);
508 priv
->reset_task_pending
= 1;
509 schedule_work(&priv
->reset_task
);
512 "%s: tx_timeout, waiting for reset", ndev
->name
);