2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
4 * Copyright 2005 Tejun Heo
6 * Based on preview driver from Silicon Image.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2, or (at your option) any
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/blkdev.h>
24 #include <linux/delay.h>
25 #include <linux/interrupt.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/device.h>
28 #include <scsi/scsi_host.h>
29 #include <scsi/scsi_cmnd.h>
30 #include <linux/libata.h>
32 #define DRV_NAME "sata_sil24"
33 #define DRV_VERSION "1.1"
36 * Port request block (PRB) 32 bytes
46 * Scatter gather entry (SGE) 16 bytes
57 struct sil24_port_multiplier
{
67 * Global controller registers (128 bytes @ BAR0)
70 HOST_SLOT_STAT
= 0x00, /* 32 bit slot stat * 4 */
74 HOST_BIST_CTRL
= 0x50,
75 HOST_BIST_PTRN
= 0x54,
76 HOST_BIST_STAT
= 0x58,
77 HOST_MEM_BIST_STAT
= 0x5c,
78 HOST_FLASH_CMD
= 0x70,
80 HOST_FLASH_DATA
= 0x74,
81 HOST_TRANSITION_DETECT
= 0x75,
82 HOST_GPIO_CTRL
= 0x76,
83 HOST_I2C_ADDR
= 0x78, /* 32 bit */
85 HOST_I2C_XFER_CNT
= 0x7e,
88 /* HOST_SLOT_STAT bits */
89 HOST_SSTAT_ATTN
= (1 << 31),
92 HOST_CTRL_M66EN
= (1 << 16), /* M66EN PCI bus signal */
93 HOST_CTRL_TRDY
= (1 << 17), /* latched PCI TRDY */
94 HOST_CTRL_STOP
= (1 << 18), /* latched PCI STOP */
95 HOST_CTRL_DEVSEL
= (1 << 19), /* latched PCI DEVSEL */
96 HOST_CTRL_REQ64
= (1 << 20), /* latched PCI REQ64 */
97 HOST_CTRL_GLOBAL_RST
= (1 << 31), /* global reset */
101 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
103 PORT_REGS_SIZE
= 0x2000,
105 PORT_LRAM
= 0x0000, /* 31 LRAM slots and PMP regs */
106 PORT_LRAM_SLOT_SZ
= 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
108 PORT_PMP
= 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
109 PORT_PMP_STATUS
= 0x0000, /* port device status offset */
110 PORT_PMP_QACTIVE
= 0x0004, /* port device QActive offset */
111 PORT_PMP_SIZE
= 0x0008, /* 8 bytes per PMP */
114 PORT_CTRL_STAT
= 0x1000, /* write: ctrl-set, read: stat */
115 PORT_CTRL_CLR
= 0x1004, /* write: ctrl-clear */
116 PORT_IRQ_STAT
= 0x1008, /* high: status, low: interrupt */
117 PORT_IRQ_ENABLE_SET
= 0x1010, /* write: enable-set */
118 PORT_IRQ_ENABLE_CLR
= 0x1014, /* write: enable-clear */
119 PORT_ACTIVATE_UPPER_ADDR
= 0x101c,
120 PORT_EXEC_FIFO
= 0x1020, /* command execution fifo */
121 PORT_CMD_ERR
= 0x1024, /* command error number */
122 PORT_FIS_CFG
= 0x1028,
123 PORT_FIFO_THRES
= 0x102c,
125 PORT_DECODE_ERR_CNT
= 0x1040,
126 PORT_DECODE_ERR_THRESH
= 0x1042,
127 PORT_CRC_ERR_CNT
= 0x1044,
128 PORT_CRC_ERR_THRESH
= 0x1046,
129 PORT_HSHK_ERR_CNT
= 0x1048,
130 PORT_HSHK_ERR_THRESH
= 0x104a,
132 PORT_PHY_CFG
= 0x1050,
133 PORT_SLOT_STAT
= 0x1800,
134 PORT_CMD_ACTIVATE
= 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
135 PORT_CONTEXT
= 0x1e04,
136 PORT_EXEC_DIAG
= 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
137 PORT_PSD_DIAG
= 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
138 PORT_SCONTROL
= 0x1f00,
139 PORT_SSTATUS
= 0x1f04,
140 PORT_SERROR
= 0x1f08,
141 PORT_SACTIVE
= 0x1f0c,
143 /* PORT_CTRL_STAT bits */
144 PORT_CS_PORT_RST
= (1 << 0), /* port reset */
145 PORT_CS_DEV_RST
= (1 << 1), /* device reset */
146 PORT_CS_INIT
= (1 << 2), /* port initialize */
147 PORT_CS_IRQ_WOC
= (1 << 3), /* interrupt write one to clear */
148 PORT_CS_CDB16
= (1 << 5), /* 0=12b cdb, 1=16b cdb */
149 PORT_CS_PMP_RESUME
= (1 << 6), /* PMP resume */
150 PORT_CS_32BIT_ACTV
= (1 << 10), /* 32-bit activation */
151 PORT_CS_PMP_EN
= (1 << 13), /* port multiplier enable */
152 PORT_CS_RDY
= (1 << 31), /* port ready to accept commands */
154 /* PORT_IRQ_STAT/ENABLE_SET/CLR */
155 /* bits[11:0] are masked */
156 PORT_IRQ_COMPLETE
= (1 << 0), /* command(s) completed */
157 PORT_IRQ_ERROR
= (1 << 1), /* command execution error */
158 PORT_IRQ_PORTRDY_CHG
= (1 << 2), /* port ready change */
159 PORT_IRQ_PWR_CHG
= (1 << 3), /* power management change */
160 PORT_IRQ_PHYRDY_CHG
= (1 << 4), /* PHY ready change */
161 PORT_IRQ_COMWAKE
= (1 << 5), /* COMWAKE received */
162 PORT_IRQ_UNK_FIS
= (1 << 6), /* unknown FIS received */
163 PORT_IRQ_DEV_XCHG
= (1 << 7), /* device exchanged */
164 PORT_IRQ_8B10B
= (1 << 8), /* 8b/10b decode error threshold */
165 PORT_IRQ_CRC
= (1 << 9), /* CRC error threshold */
166 PORT_IRQ_HANDSHAKE
= (1 << 10), /* handshake error threshold */
167 PORT_IRQ_SDB_NOTIFY
= (1 << 11), /* SDB notify received */
169 DEF_PORT_IRQ
= PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
|
170 PORT_IRQ_PHYRDY_CHG
| PORT_IRQ_DEV_XCHG
|
171 PORT_IRQ_UNK_FIS
| PORT_IRQ_SDB_NOTIFY
,
173 /* bits[27:16] are unmasked (raw) */
174 PORT_IRQ_RAW_SHIFT
= 16,
175 PORT_IRQ_MASKED_MASK
= 0x7ff,
176 PORT_IRQ_RAW_MASK
= (0x7ff << PORT_IRQ_RAW_SHIFT
),
178 /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
179 PORT_IRQ_STEER_SHIFT
= 30,
180 PORT_IRQ_STEER_MASK
= (3 << PORT_IRQ_STEER_SHIFT
),
182 /* PORT_CMD_ERR constants */
183 PORT_CERR_DEV
= 1, /* Error bit in D2H Register FIS */
184 PORT_CERR_SDB
= 2, /* Error bit in SDB FIS */
185 PORT_CERR_DATA
= 3, /* Error in data FIS not detected by dev */
186 PORT_CERR_SEND
= 4, /* Initial cmd FIS transmission failure */
187 PORT_CERR_INCONSISTENT
= 5, /* Protocol mismatch */
188 PORT_CERR_DIRECTION
= 6, /* Data direction mismatch */
189 PORT_CERR_UNDERRUN
= 7, /* Ran out of SGEs while writing */
190 PORT_CERR_OVERRUN
= 8, /* Ran out of SGEs while reading */
191 PORT_CERR_PKT_PROT
= 11, /* DIR invalid in 1st PIO setup of ATAPI */
192 PORT_CERR_SGT_BOUNDARY
= 16, /* PLD ecode 00 - SGT not on qword boundary */
193 PORT_CERR_SGT_TGTABRT
= 17, /* PLD ecode 01 - target abort */
194 PORT_CERR_SGT_MSTABRT
= 18, /* PLD ecode 10 - master abort */
195 PORT_CERR_SGT_PCIPERR
= 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
196 PORT_CERR_CMD_BOUNDARY
= 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
197 PORT_CERR_CMD_TGTABRT
= 25, /* ctrl[15:13] 010 - target abort */
198 PORT_CERR_CMD_MSTABRT
= 26, /* ctrl[15:13] 100 - master abort */
199 PORT_CERR_CMD_PCIPERR
= 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
200 PORT_CERR_XFR_UNDEF
= 32, /* PSD ecode 00 - undefined */
201 PORT_CERR_XFR_TGTABRT
= 33, /* PSD ecode 01 - target abort */
202 PORT_CERR_XFR_MSTABRT
= 34, /* PSD ecode 10 - master abort */
203 PORT_CERR_XFR_PCIPERR
= 35, /* PSD ecode 11 - PCI prity err during transfer */
204 PORT_CERR_SENDSERVICE
= 36, /* FIS received while sending service */
206 /* bits of PRB control field */
207 PRB_CTRL_PROTOCOL
= (1 << 0), /* override def. ATA protocol */
208 PRB_CTRL_PACKET_READ
= (1 << 4), /* PACKET cmd read */
209 PRB_CTRL_PACKET_WRITE
= (1 << 5), /* PACKET cmd write */
210 PRB_CTRL_NIEN
= (1 << 6), /* Mask completion irq */
211 PRB_CTRL_SRST
= (1 << 7), /* Soft reset request (ign BSY?) */
213 /* PRB protocol field */
214 PRB_PROT_PACKET
= (1 << 0),
215 PRB_PROT_TCQ
= (1 << 1),
216 PRB_PROT_NCQ
= (1 << 2),
217 PRB_PROT_READ
= (1 << 3),
218 PRB_PROT_WRITE
= (1 << 4),
219 PRB_PROT_TRANSPARENT
= (1 << 5),
224 SGE_TRM
= (1 << 31), /* Last SGE in chain */
225 SGE_LNK
= (1 << 30), /* linked list
226 Points to SGT, not SGE */
227 SGE_DRD
= (1 << 29), /* discard data read (/dev/null)
228 data address ignored */
238 SIL24_COMMON_FLAGS
= ATA_FLAG_SATA
| ATA_FLAG_NO_LEGACY
|
239 ATA_FLAG_MMIO
| ATA_FLAG_PIO_DMA
|
240 ATA_FLAG_NCQ
| ATA_FLAG_ACPI_SATA
|
241 ATA_FLAG_AN
| ATA_FLAG_PMP
,
242 SIL24_COMMON_LFLAGS
= ATA_LFLAG_SKIP_D2H_BSY
,
243 SIL24_FLAG_PCIX_IRQ_WOC
= (1 << 24), /* IRQ loss errata on PCI-X */
245 IRQ_STAT_4PORTS
= 0xf,
248 struct sil24_ata_block
{
249 struct sil24_prb prb
;
250 struct sil24_sge sge
[LIBATA_MAX_PRD
];
253 struct sil24_atapi_block
{
254 struct sil24_prb prb
;
256 struct sil24_sge sge
[LIBATA_MAX_PRD
- 1];
259 union sil24_cmd_block
{
260 struct sil24_ata_block ata
;
261 struct sil24_atapi_block atapi
;
264 static struct sil24_cerr_info
{
265 unsigned int err_mask
, action
;
267 } sil24_cerr_db
[] = {
268 [0] = { AC_ERR_DEV
, ATA_EH_REVALIDATE
,
270 [PORT_CERR_DEV
] = { AC_ERR_DEV
, ATA_EH_REVALIDATE
,
271 "device error via D2H FIS" },
272 [PORT_CERR_SDB
] = { AC_ERR_DEV
, ATA_EH_REVALIDATE
,
273 "device error via SDB FIS" },
274 [PORT_CERR_DATA
] = { AC_ERR_ATA_BUS
, ATA_EH_SOFTRESET
,
275 "error in data FIS" },
276 [PORT_CERR_SEND
] = { AC_ERR_ATA_BUS
, ATA_EH_SOFTRESET
,
277 "failed to transmit command FIS" },
278 [PORT_CERR_INCONSISTENT
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
279 "protocol mismatch" },
280 [PORT_CERR_DIRECTION
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
281 "data directon mismatch" },
282 [PORT_CERR_UNDERRUN
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
283 "ran out of SGEs while writing" },
284 [PORT_CERR_OVERRUN
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
285 "ran out of SGEs while reading" },
286 [PORT_CERR_PKT_PROT
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
287 "invalid data directon for ATAPI CDB" },
288 [PORT_CERR_SGT_BOUNDARY
] = { AC_ERR_SYSTEM
, ATA_EH_SOFTRESET
,
289 "SGT no on qword boundary" },
290 [PORT_CERR_SGT_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
291 "PCI target abort while fetching SGT" },
292 [PORT_CERR_SGT_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
293 "PCI master abort while fetching SGT" },
294 [PORT_CERR_SGT_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
295 "PCI parity error while fetching SGT" },
296 [PORT_CERR_CMD_BOUNDARY
] = { AC_ERR_SYSTEM
, ATA_EH_SOFTRESET
,
297 "PRB not on qword boundary" },
298 [PORT_CERR_CMD_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
299 "PCI target abort while fetching PRB" },
300 [PORT_CERR_CMD_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
301 "PCI master abort while fetching PRB" },
302 [PORT_CERR_CMD_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
303 "PCI parity error while fetching PRB" },
304 [PORT_CERR_XFR_UNDEF
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
305 "undefined error while transferring data" },
306 [PORT_CERR_XFR_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
307 "PCI target abort while transferring data" },
308 [PORT_CERR_XFR_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
309 "PCI master abort while transferring data" },
310 [PORT_CERR_XFR_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
311 "PCI parity error while transferring data" },
312 [PORT_CERR_SENDSERVICE
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
313 "FIS received while sending service FIS" },
319 * The preview driver always returned 0 for status. We emulate it
320 * here from the previous interrupt.
322 struct sil24_port_priv
{
323 union sil24_cmd_block
*cmd_block
; /* 32 cmd blocks */
324 dma_addr_t cmd_block_dma
; /* DMA base addr for them */
325 struct ata_taskfile tf
; /* Cached taskfile registers */
329 static void sil24_dev_config(struct ata_device
*dev
);
330 static u8
sil24_check_status(struct ata_port
*ap
);
331 static int sil24_scr_read(struct ata_port
*ap
, unsigned sc_reg
, u32
*val
);
332 static int sil24_scr_write(struct ata_port
*ap
, unsigned sc_reg
, u32 val
);
333 static void sil24_tf_read(struct ata_port
*ap
, struct ata_taskfile
*tf
);
334 static int sil24_qc_defer(struct ata_queued_cmd
*qc
);
335 static void sil24_qc_prep(struct ata_queued_cmd
*qc
);
336 static unsigned int sil24_qc_issue(struct ata_queued_cmd
*qc
);
337 static void sil24_irq_clear(struct ata_port
*ap
);
338 static void sil24_pmp_attach(struct ata_port
*ap
);
339 static void sil24_pmp_detach(struct ata_port
*ap
);
340 static void sil24_freeze(struct ata_port
*ap
);
341 static void sil24_thaw(struct ata_port
*ap
);
342 static void sil24_error_handler(struct ata_port
*ap
);
343 static void sil24_post_internal_cmd(struct ata_queued_cmd
*qc
);
344 static int sil24_port_start(struct ata_port
*ap
);
345 static int sil24_init_one(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
347 static int sil24_pci_device_resume(struct pci_dev
*pdev
);
348 static int sil24_port_resume(struct ata_port
*ap
);
351 static const struct pci_device_id sil24_pci_tbl
[] = {
352 { PCI_VDEVICE(CMD
, 0x3124), BID_SIL3124
},
353 { PCI_VDEVICE(INTEL
, 0x3124), BID_SIL3124
},
354 { PCI_VDEVICE(CMD
, 0x3132), BID_SIL3132
},
355 { PCI_VDEVICE(CMD
, 0x0242), BID_SIL3132
},
356 { PCI_VDEVICE(CMD
, 0x3131), BID_SIL3131
},
357 { PCI_VDEVICE(CMD
, 0x3531), BID_SIL3131
},
359 { } /* terminate list */
362 static struct pci_driver sil24_pci_driver
= {
364 .id_table
= sil24_pci_tbl
,
365 .probe
= sil24_init_one
,
366 .remove
= ata_pci_remove_one
,
368 .suspend
= ata_pci_device_suspend
,
369 .resume
= sil24_pci_device_resume
,
373 static struct scsi_host_template sil24_sht
= {
374 .module
= THIS_MODULE
,
376 .ioctl
= ata_scsi_ioctl
,
377 .queuecommand
= ata_scsi_queuecmd
,
378 .change_queue_depth
= ata_scsi_change_queue_depth
,
379 .can_queue
= SIL24_MAX_CMDS
,
380 .this_id
= ATA_SHT_THIS_ID
,
381 .sg_tablesize
= LIBATA_MAX_PRD
,
382 .cmd_per_lun
= ATA_SHT_CMD_PER_LUN
,
383 .emulated
= ATA_SHT_EMULATED
,
384 .use_clustering
= ATA_SHT_USE_CLUSTERING
,
385 .proc_name
= DRV_NAME
,
386 .dma_boundary
= ATA_DMA_BOUNDARY
,
387 .slave_configure
= ata_scsi_slave_config
,
388 .slave_destroy
= ata_scsi_slave_destroy
,
389 .bios_param
= ata_std_bios_param
,
392 static const struct ata_port_operations sil24_ops
= {
393 .dev_config
= sil24_dev_config
,
395 .check_status
= sil24_check_status
,
396 .check_altstatus
= sil24_check_status
,
397 .dev_select
= ata_noop_dev_select
,
399 .tf_read
= sil24_tf_read
,
401 .qc_defer
= sil24_qc_defer
,
402 .qc_prep
= sil24_qc_prep
,
403 .qc_issue
= sil24_qc_issue
,
405 .irq_clear
= sil24_irq_clear
,
407 .scr_read
= sil24_scr_read
,
408 .scr_write
= sil24_scr_write
,
410 .pmp_attach
= sil24_pmp_attach
,
411 .pmp_detach
= sil24_pmp_detach
,
413 .freeze
= sil24_freeze
,
415 .error_handler
= sil24_error_handler
,
416 .post_internal_cmd
= sil24_post_internal_cmd
,
418 .port_start
= sil24_port_start
,
421 .port_resume
= sil24_port_resume
,
426 * Use bits 30-31 of port_flags to encode available port numbers.
427 * Current maxium is 4.
429 #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
430 #define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
432 static const struct ata_port_info sil24_port_info
[] = {
435 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(4) |
436 SIL24_FLAG_PCIX_IRQ_WOC
,
437 .link_flags
= SIL24_COMMON_LFLAGS
,
438 .pio_mask
= 0x1f, /* pio0-4 */
439 .mwdma_mask
= 0x07, /* mwdma0-2 */
440 .udma_mask
= ATA_UDMA5
, /* udma0-5 */
441 .port_ops
= &sil24_ops
,
445 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(2),
446 .link_flags
= SIL24_COMMON_LFLAGS
,
447 .pio_mask
= 0x1f, /* pio0-4 */
448 .mwdma_mask
= 0x07, /* mwdma0-2 */
449 .udma_mask
= ATA_UDMA5
, /* udma0-5 */
450 .port_ops
= &sil24_ops
,
452 /* sil_3131/sil_3531 */
454 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(1),
455 .link_flags
= SIL24_COMMON_LFLAGS
,
456 .pio_mask
= 0x1f, /* pio0-4 */
457 .mwdma_mask
= 0x07, /* mwdma0-2 */
458 .udma_mask
= ATA_UDMA5
, /* udma0-5 */
459 .port_ops
= &sil24_ops
,
463 static int sil24_tag(int tag
)
465 if (unlikely(ata_tag_internal(tag
)))
470 static void sil24_dev_config(struct ata_device
*dev
)
472 void __iomem
*port
= dev
->link
->ap
->ioaddr
.cmd_addr
;
474 if (dev
->cdb_len
== 16)
475 writel(PORT_CS_CDB16
, port
+ PORT_CTRL_STAT
);
477 writel(PORT_CS_CDB16
, port
+ PORT_CTRL_CLR
);
480 static void sil24_read_tf(struct ata_port
*ap
, int tag
, struct ata_taskfile
*tf
)
482 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
483 struct sil24_prb __iomem
*prb
;
486 prb
= port
+ PORT_LRAM
+ sil24_tag(tag
) * PORT_LRAM_SLOT_SZ
;
487 memcpy_fromio(fis
, prb
->fis
, sizeof(fis
));
488 ata_tf_from_fis(fis
, tf
);
491 static u8
sil24_check_status(struct ata_port
*ap
)
493 struct sil24_port_priv
*pp
= ap
->private_data
;
494 return pp
->tf
.command
;
497 static int sil24_scr_map
[] = {
504 static int sil24_scr_read(struct ata_port
*ap
, unsigned sc_reg
, u32
*val
)
506 void __iomem
*scr_addr
= ap
->ioaddr
.scr_addr
;
508 if (sc_reg
< ARRAY_SIZE(sil24_scr_map
)) {
510 addr
= scr_addr
+ sil24_scr_map
[sc_reg
] * 4;
511 *val
= readl(scr_addr
+ sil24_scr_map
[sc_reg
] * 4);
517 static int sil24_scr_write(struct ata_port
*ap
, unsigned sc_reg
, u32 val
)
519 void __iomem
*scr_addr
= ap
->ioaddr
.scr_addr
;
521 if (sc_reg
< ARRAY_SIZE(sil24_scr_map
)) {
523 addr
= scr_addr
+ sil24_scr_map
[sc_reg
] * 4;
524 writel(val
, scr_addr
+ sil24_scr_map
[sc_reg
] * 4);
530 static void sil24_tf_read(struct ata_port
*ap
, struct ata_taskfile
*tf
)
532 struct sil24_port_priv
*pp
= ap
->private_data
;
536 static void sil24_config_port(struct ata_port
*ap
)
538 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
540 /* configure IRQ WoC */
541 if (ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
)
542 writel(PORT_CS_IRQ_WOC
, port
+ PORT_CTRL_STAT
);
544 writel(PORT_CS_IRQ_WOC
, port
+ PORT_CTRL_CLR
);
546 /* zero error counters. */
547 writel(0x8000, port
+ PORT_DECODE_ERR_THRESH
);
548 writel(0x8000, port
+ PORT_CRC_ERR_THRESH
);
549 writel(0x8000, port
+ PORT_HSHK_ERR_THRESH
);
550 writel(0x0000, port
+ PORT_DECODE_ERR_CNT
);
551 writel(0x0000, port
+ PORT_CRC_ERR_CNT
);
552 writel(0x0000, port
+ PORT_HSHK_ERR_CNT
);
554 /* always use 64bit activation */
555 writel(PORT_CS_32BIT_ACTV
, port
+ PORT_CTRL_CLR
);
557 /* clear port multiplier enable and resume bits */
558 writel(PORT_CS_PMP_EN
| PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_CLR
);
561 static void sil24_config_pmp(struct ata_port
*ap
, int attached
)
563 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
566 writel(PORT_CS_PMP_EN
, port
+ PORT_CTRL_STAT
);
568 writel(PORT_CS_PMP_EN
, port
+ PORT_CTRL_CLR
);
571 static void sil24_clear_pmp(struct ata_port
*ap
)
573 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
576 writel(PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_CLR
);
578 for (i
= 0; i
< SATA_PMP_MAX_PORTS
; i
++) {
579 void __iomem
*pmp_base
= port
+ PORT_PMP
+ i
* PORT_PMP_SIZE
;
581 writel(0, pmp_base
+ PORT_PMP_STATUS
);
582 writel(0, pmp_base
+ PORT_PMP_QACTIVE
);
586 static int sil24_init_port(struct ata_port
*ap
)
588 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
589 struct sil24_port_priv
*pp
= ap
->private_data
;
592 /* clear PMP error status */
593 if (ap
->nr_pmp_links
)
596 writel(PORT_CS_INIT
, port
+ PORT_CTRL_STAT
);
597 ata_wait_register(port
+ PORT_CTRL_STAT
,
598 PORT_CS_INIT
, PORT_CS_INIT
, 10, 100);
599 tmp
= ata_wait_register(port
+ PORT_CTRL_STAT
,
600 PORT_CS_RDY
, 0, 10, 100);
602 if ((tmp
& (PORT_CS_INIT
| PORT_CS_RDY
)) != PORT_CS_RDY
) {
604 ap
->link
.eh_context
.i
.action
|= ATA_EH_HARDRESET
;
611 static int sil24_exec_polled_cmd(struct ata_port
*ap
, int pmp
,
612 const struct ata_taskfile
*tf
,
613 int is_cmd
, u32 ctrl
,
614 unsigned long timeout_msec
)
616 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
617 struct sil24_port_priv
*pp
= ap
->private_data
;
618 struct sil24_prb
*prb
= &pp
->cmd_block
[0].ata
.prb
;
619 dma_addr_t paddr
= pp
->cmd_block_dma
;
620 u32 irq_enabled
, irq_mask
, irq_stat
;
623 prb
->ctrl
= cpu_to_le16(ctrl
);
624 ata_tf_to_fis(tf
, pmp
, is_cmd
, prb
->fis
);
626 /* temporarily plug completion and error interrupts */
627 irq_enabled
= readl(port
+ PORT_IRQ_ENABLE_SET
);
628 writel(PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
, port
+ PORT_IRQ_ENABLE_CLR
);
630 writel((u32
)paddr
, port
+ PORT_CMD_ACTIVATE
);
631 writel((u64
)paddr
>> 32, port
+ PORT_CMD_ACTIVATE
+ 4);
633 irq_mask
= (PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
) << PORT_IRQ_RAW_SHIFT
;
634 irq_stat
= ata_wait_register(port
+ PORT_IRQ_STAT
, irq_mask
, 0x0,
637 writel(irq_mask
, port
+ PORT_IRQ_STAT
); /* clear IRQs */
638 irq_stat
>>= PORT_IRQ_RAW_SHIFT
;
640 if (irq_stat
& PORT_IRQ_COMPLETE
)
643 /* force port into known state */
646 if (irq_stat
& PORT_IRQ_ERROR
)
652 /* restore IRQ enabled */
653 writel(irq_enabled
, port
+ PORT_IRQ_ENABLE_SET
);
658 static int sil24_do_softreset(struct ata_link
*link
, unsigned int *class,
659 int pmp
, unsigned long deadline
)
661 struct ata_port
*ap
= link
->ap
;
662 unsigned long timeout_msec
= 0;
663 struct ata_taskfile tf
;
669 if (ata_link_offline(link
)) {
670 DPRINTK("PHY reports no device\n");
671 *class = ATA_DEV_NONE
;
675 /* put the port into known state */
676 if (sil24_init_port(ap
)) {
677 reason
="port not ready";
682 if (time_after(deadline
, jiffies
))
683 timeout_msec
= jiffies_to_msecs(deadline
- jiffies
);
685 ata_tf_init(link
->device
, &tf
); /* doesn't really matter */
686 rc
= sil24_exec_polled_cmd(ap
, pmp
, &tf
, 0, PRB_CTRL_SRST
,
692 reason
= "SRST command error";
696 sil24_read_tf(ap
, 0, &tf
);
697 *class = ata_dev_classify(&tf
);
699 if (*class == ATA_DEV_UNKNOWN
)
700 *class = ATA_DEV_NONE
;
703 DPRINTK("EXIT, class=%u\n", *class);
707 ata_link_printk(link
, KERN_ERR
, "softreset failed (%s)\n", reason
);
711 static int sil24_softreset(struct ata_link
*link
, unsigned int *class,
712 unsigned long deadline
)
714 return sil24_do_softreset(link
, class, SATA_PMP_CTRL_PORT
, deadline
);
717 static int sil24_hardreset(struct ata_link
*link
, unsigned int *class,
718 unsigned long deadline
)
720 struct ata_port
*ap
= link
->ap
;
721 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
722 struct sil24_port_priv
*pp
= ap
->private_data
;
723 int did_port_rst
= 0;
729 /* Sometimes, DEV_RST is not enough to recover the controller.
730 * This happens often after PM DMA CS errata.
732 if (pp
->do_port_rst
) {
733 ata_port_printk(ap
, KERN_WARNING
, "controller in dubious "
734 "state, performing PORT_RST\n");
736 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_STAT
);
738 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_CLR
);
739 ata_wait_register(port
+ PORT_CTRL_STAT
, PORT_CS_RDY
, 0,
742 /* restore port configuration */
743 sil24_config_port(ap
);
744 sil24_config_pmp(ap
, ap
->nr_pmp_links
);
750 /* sil24 does the right thing(tm) without any protection */
754 if (ata_link_online(link
))
757 writel(PORT_CS_DEV_RST
, port
+ PORT_CTRL_STAT
);
758 tmp
= ata_wait_register(port
+ PORT_CTRL_STAT
,
759 PORT_CS_DEV_RST
, PORT_CS_DEV_RST
, 10, tout_msec
);
761 /* SStatus oscillates between zero and valid status after
762 * DEV_RST, debounce it.
764 rc
= sata_link_debounce(link
, sata_deb_timing_long
, deadline
);
766 reason
= "PHY debouncing failed";
770 if (tmp
& PORT_CS_DEV_RST
) {
771 if (ata_link_offline(link
))
773 reason
= "link not ready";
777 /* Sil24 doesn't store signature FIS after hardreset, so we
778 * can't wait for BSY to clear. Some devices take a long time
779 * to get ready and those devices will choke if we don't wait
780 * for BSY clearance here. Tell libata to perform follow-up
791 ata_link_printk(link
, KERN_ERR
, "hardreset failed (%s)\n", reason
);
795 static inline void sil24_fill_sg(struct ata_queued_cmd
*qc
,
796 struct sil24_sge
*sge
)
798 struct scatterlist
*sg
;
799 struct sil24_sge
*last_sge
= NULL
;
801 ata_for_each_sg(sg
, qc
) {
802 sge
->addr
= cpu_to_le64(sg_dma_address(sg
));
803 sge
->cnt
= cpu_to_le32(sg_dma_len(sg
));
810 if (likely(last_sge
))
811 last_sge
->flags
= cpu_to_le32(SGE_TRM
);
814 static int sil24_qc_defer(struct ata_queued_cmd
*qc
)
816 struct ata_link
*link
= qc
->dev
->link
;
817 struct ata_port
*ap
= link
->ap
;
818 u8 prot
= qc
->tf
.protocol
;
819 int is_atapi
= (prot
== ATA_PROT_ATAPI
||
820 prot
== ATA_PROT_ATAPI_NODATA
||
821 prot
== ATA_PROT_ATAPI_DMA
);
823 /* ATAPI commands completing with CHECK_SENSE cause various
824 * weird problems if other commands are active. PMP DMA CS
825 * errata doesn't cover all and HSM violation occurs even with
826 * only one other device active. Always run an ATAPI command
829 if (unlikely(ap
->excl_link
)) {
830 if (link
== ap
->excl_link
) {
831 if (ap
->nr_active_links
)
832 return ATA_DEFER_PORT
;
833 qc
->flags
|= ATA_QCFLAG_CLEAR_EXCL
;
835 return ATA_DEFER_PORT
;
836 } else if (unlikely(is_atapi
)) {
837 ap
->excl_link
= link
;
838 if (ap
->nr_active_links
)
839 return ATA_DEFER_PORT
;
840 qc
->flags
|= ATA_QCFLAG_CLEAR_EXCL
;
843 return ata_std_qc_defer(qc
);
846 static void sil24_qc_prep(struct ata_queued_cmd
*qc
)
848 struct ata_port
*ap
= qc
->ap
;
849 struct sil24_port_priv
*pp
= ap
->private_data
;
850 union sil24_cmd_block
*cb
;
851 struct sil24_prb
*prb
;
852 struct sil24_sge
*sge
;
855 cb
= &pp
->cmd_block
[sil24_tag(qc
->tag
)];
857 switch (qc
->tf
.protocol
) {
861 case ATA_PROT_NODATA
:
867 case ATA_PROT_ATAPI_DMA
:
868 case ATA_PROT_ATAPI_NODATA
:
869 prb
= &cb
->atapi
.prb
;
871 memset(cb
->atapi
.cdb
, 0, 32);
872 memcpy(cb
->atapi
.cdb
, qc
->cdb
, qc
->dev
->cdb_len
);
874 if (qc
->tf
.protocol
!= ATA_PROT_ATAPI_NODATA
) {
875 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
)
876 ctrl
= PRB_CTRL_PACKET_WRITE
;
878 ctrl
= PRB_CTRL_PACKET_READ
;
883 prb
= NULL
; /* shut up, gcc */
888 prb
->ctrl
= cpu_to_le16(ctrl
);
889 ata_tf_to_fis(&qc
->tf
, qc
->dev
->link
->pmp
, 1, prb
->fis
);
891 if (qc
->flags
& ATA_QCFLAG_DMAMAP
)
892 sil24_fill_sg(qc
, sge
);
895 static unsigned int sil24_qc_issue(struct ata_queued_cmd
*qc
)
897 struct ata_port
*ap
= qc
->ap
;
898 struct sil24_port_priv
*pp
= ap
->private_data
;
899 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
900 unsigned int tag
= sil24_tag(qc
->tag
);
902 void __iomem
*activate
;
904 paddr
= pp
->cmd_block_dma
+ tag
* sizeof(*pp
->cmd_block
);
905 activate
= port
+ PORT_CMD_ACTIVATE
+ tag
* 8;
907 writel((u32
)paddr
, activate
);
908 writel((u64
)paddr
>> 32, activate
+ 4);
913 static void sil24_irq_clear(struct ata_port
*ap
)
918 static void sil24_pmp_attach(struct ata_port
*ap
)
920 sil24_config_pmp(ap
, 1);
924 static void sil24_pmp_detach(struct ata_port
*ap
)
927 sil24_config_pmp(ap
, 0);
930 static int sil24_pmp_softreset(struct ata_link
*link
, unsigned int *class,
931 unsigned long deadline
)
933 return sil24_do_softreset(link
, class, link
->pmp
, deadline
);
936 static int sil24_pmp_hardreset(struct ata_link
*link
, unsigned int *class,
937 unsigned long deadline
)
941 rc
= sil24_init_port(link
->ap
);
943 ata_link_printk(link
, KERN_ERR
,
944 "hardreset failed (port not ready)\n");
948 return sata_pmp_std_hardreset(link
, class, deadline
);
951 static void sil24_freeze(struct ata_port
*ap
)
953 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
955 /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
956 * PORT_IRQ_ENABLE instead.
958 writel(0xffff, port
+ PORT_IRQ_ENABLE_CLR
);
961 static void sil24_thaw(struct ata_port
*ap
)
963 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
967 tmp
= readl(port
+ PORT_IRQ_STAT
);
968 writel(tmp
, port
+ PORT_IRQ_STAT
);
970 /* turn IRQ back on */
971 writel(DEF_PORT_IRQ
, port
+ PORT_IRQ_ENABLE_SET
);
974 static void sil24_error_intr(struct ata_port
*ap
)
976 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
977 struct sil24_port_priv
*pp
= ap
->private_data
;
978 struct ata_queued_cmd
*qc
= NULL
;
979 struct ata_link
*link
;
980 struct ata_eh_info
*ehi
;
981 int abort
= 0, freeze
= 0;
984 /* on error, we need to clear IRQ explicitly */
985 irq_stat
= readl(port
+ PORT_IRQ_STAT
);
986 writel(irq_stat
, port
+ PORT_IRQ_STAT
);
988 /* first, analyze and record host port events */
990 ehi
= &link
->eh_info
;
991 ata_ehi_clear_desc(ehi
);
993 ata_ehi_push_desc(ehi
, "irq_stat 0x%08x", irq_stat
);
995 if (irq_stat
& PORT_IRQ_SDB_NOTIFY
) {
996 ata_ehi_push_desc(ehi
, "SDB notify");
997 sata_async_notification(ap
);
1000 if (irq_stat
& (PORT_IRQ_PHYRDY_CHG
| PORT_IRQ_DEV_XCHG
)) {
1001 ata_ehi_hotplugged(ehi
);
1002 ata_ehi_push_desc(ehi
, "%s",
1003 irq_stat
& PORT_IRQ_PHYRDY_CHG
?
1004 "PHY RDY changed" : "device exchanged");
1008 if (irq_stat
& PORT_IRQ_UNK_FIS
) {
1009 ehi
->err_mask
|= AC_ERR_HSM
;
1010 ehi
->action
|= ATA_EH_SOFTRESET
;
1011 ata_ehi_push_desc(ehi
, "unknown FIS");
1015 /* deal with command error */
1016 if (irq_stat
& PORT_IRQ_ERROR
) {
1017 struct sil24_cerr_info
*ci
= NULL
;
1018 unsigned int err_mask
= 0, action
= 0;
1024 /* DMA Context Switch Failure in Port Multiplier Mode
1025 * errata. If we have active commands to 3 or more
1026 * devices, any error condition on active devices can
1027 * corrupt DMA context switching.
1029 if (ap
->nr_active_links
>= 3) {
1030 ehi
->err_mask
|= AC_ERR_OTHER
;
1031 ehi
->action
|= ATA_EH_HARDRESET
;
1032 ata_ehi_push_desc(ehi
, "PMP DMA CS errata");
1033 pp
->do_port_rst
= 1;
1037 /* find out the offending link and qc */
1038 if (ap
->nr_pmp_links
) {
1039 context
= readl(port
+ PORT_CONTEXT
);
1040 pmp
= (context
>> 5) & 0xf;
1042 if (pmp
< ap
->nr_pmp_links
) {
1043 link
= &ap
->pmp_link
[pmp
];
1044 ehi
= &link
->eh_info
;
1045 qc
= ata_qc_from_tag(ap
, link
->active_tag
);
1047 ata_ehi_clear_desc(ehi
);
1048 ata_ehi_push_desc(ehi
, "irq_stat 0x%08x",
1051 err_mask
|= AC_ERR_HSM
;
1052 action
|= ATA_EH_HARDRESET
;
1056 qc
= ata_qc_from_tag(ap
, link
->active_tag
);
1058 /* analyze CMD_ERR */
1059 cerr
= readl(port
+ PORT_CMD_ERR
);
1060 if (cerr
< ARRAY_SIZE(sil24_cerr_db
))
1061 ci
= &sil24_cerr_db
[cerr
];
1063 if (ci
&& ci
->desc
) {
1064 err_mask
|= ci
->err_mask
;
1065 action
|= ci
->action
;
1066 ata_ehi_push_desc(ehi
, "%s", ci
->desc
);
1068 err_mask
|= AC_ERR_OTHER
;
1069 action
|= ATA_EH_SOFTRESET
;
1070 ata_ehi_push_desc(ehi
, "unknown command error %d",
1074 /* record error info */
1076 sil24_read_tf(ap
, qc
->tag
, &pp
->tf
);
1077 qc
->err_mask
|= err_mask
;
1079 ehi
->err_mask
|= err_mask
;
1081 ehi
->action
|= action
;
1083 /* if PMP, resume */
1084 if (ap
->nr_pmp_links
)
1085 writel(PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_STAT
);
1088 /* freeze or abort */
1090 ata_port_freeze(ap
);
1093 ata_link_abort(qc
->dev
->link
);
1099 static void sil24_finish_qc(struct ata_queued_cmd
*qc
)
1101 struct ata_port
*ap
= qc
->ap
;
1102 struct sil24_port_priv
*pp
= ap
->private_data
;
1104 if (qc
->flags
& ATA_QCFLAG_RESULT_TF
)
1105 sil24_read_tf(ap
, qc
->tag
, &pp
->tf
);
1108 static inline void sil24_host_intr(struct ata_port
*ap
)
1110 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
1111 u32 slot_stat
, qc_active
;
1114 /* If PCIX_IRQ_WOC, there's an inherent race window between
1115 * clearing IRQ pending status and reading PORT_SLOT_STAT
1116 * which may cause spurious interrupts afterwards. This is
1117 * unavoidable and much better than losing interrupts which
1118 * happens if IRQ pending is cleared after reading
1121 if (ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
)
1122 writel(PORT_IRQ_COMPLETE
, port
+ PORT_IRQ_STAT
);
1124 slot_stat
= readl(port
+ PORT_SLOT_STAT
);
1126 if (unlikely(slot_stat
& HOST_SSTAT_ATTN
)) {
1127 sil24_error_intr(ap
);
1131 qc_active
= slot_stat
& ~HOST_SSTAT_ATTN
;
1132 rc
= ata_qc_complete_multiple(ap
, qc_active
, sil24_finish_qc
);
1136 struct ata_eh_info
*ehi
= &ap
->link
.eh_info
;
1137 ehi
->err_mask
|= AC_ERR_HSM
;
1138 ehi
->action
|= ATA_EH_SOFTRESET
;
1139 ata_port_freeze(ap
);
1143 /* spurious interrupts are expected if PCIX_IRQ_WOC */
1144 if (!(ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
) && ata_ratelimit())
1145 ata_port_printk(ap
, KERN_INFO
, "spurious interrupt "
1146 "(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1147 slot_stat
, ap
->link
.active_tag
, ap
->link
.sactive
);
1150 static irqreturn_t
sil24_interrupt(int irq
, void *dev_instance
)
1152 struct ata_host
*host
= dev_instance
;
1153 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1154 unsigned handled
= 0;
1158 status
= readl(host_base
+ HOST_IRQ_STAT
);
1160 if (status
== 0xffffffff) {
1161 printk(KERN_ERR DRV_NAME
": IRQ status == 0xffffffff, "
1162 "PCI fault or device removal?\n");
1166 if (!(status
& IRQ_STAT_4PORTS
))
1169 spin_lock(&host
->lock
);
1171 for (i
= 0; i
< host
->n_ports
; i
++)
1172 if (status
& (1 << i
)) {
1173 struct ata_port
*ap
= host
->ports
[i
];
1174 if (ap
&& !(ap
->flags
& ATA_FLAG_DISABLED
)) {
1175 sil24_host_intr(ap
);
1178 printk(KERN_ERR DRV_NAME
1179 ": interrupt from disabled port %d\n", i
);
1182 spin_unlock(&host
->lock
);
1184 return IRQ_RETVAL(handled
);
1187 static void sil24_error_handler(struct ata_port
*ap
)
1189 struct sil24_port_priv
*pp
= ap
->private_data
;
1191 if (sil24_init_port(ap
))
1192 ata_eh_freeze_port(ap
);
1194 /* perform recovery */
1195 sata_pmp_do_eh(ap
, ata_std_prereset
, sil24_softreset
, sil24_hardreset
,
1196 ata_std_postreset
, sata_pmp_std_prereset
,
1197 sil24_pmp_softreset
, sil24_pmp_hardreset
,
1198 sata_pmp_std_postreset
);
1200 pp
->do_port_rst
= 0;
1203 static void sil24_post_internal_cmd(struct ata_queued_cmd
*qc
)
1205 struct ata_port
*ap
= qc
->ap
;
1207 /* make DMA engine forget about the failed command */
1208 if ((qc
->flags
& ATA_QCFLAG_FAILED
) && sil24_init_port(ap
))
1209 ata_eh_freeze_port(ap
);
1212 static int sil24_port_start(struct ata_port
*ap
)
1214 struct device
*dev
= ap
->host
->dev
;
1215 struct sil24_port_priv
*pp
;
1216 union sil24_cmd_block
*cb
;
1217 size_t cb_size
= sizeof(*cb
) * SIL24_MAX_CMDS
;
1221 pp
= devm_kzalloc(dev
, sizeof(*pp
), GFP_KERNEL
);
1225 pp
->tf
.command
= ATA_DRDY
;
1227 cb
= dmam_alloc_coherent(dev
, cb_size
, &cb_dma
, GFP_KERNEL
);
1230 memset(cb
, 0, cb_size
);
1232 rc
= ata_pad_alloc(ap
, dev
);
1237 pp
->cmd_block_dma
= cb_dma
;
1239 ap
->private_data
= pp
;
1244 static void sil24_init_controller(struct ata_host
*host
)
1246 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1251 writel(0, host_base
+ HOST_FLASH_CMD
);
1253 /* clear global reset & mask interrupts during initialization */
1254 writel(0, host_base
+ HOST_CTRL
);
1257 for (i
= 0; i
< host
->n_ports
; i
++) {
1258 struct ata_port
*ap
= host
->ports
[i
];
1259 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
1261 /* Initial PHY setting */
1262 writel(0x20c, port
+ PORT_PHY_CFG
);
1264 /* Clear port RST */
1265 tmp
= readl(port
+ PORT_CTRL_STAT
);
1266 if (tmp
& PORT_CS_PORT_RST
) {
1267 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_CLR
);
1268 tmp
= ata_wait_register(port
+ PORT_CTRL_STAT
,
1270 PORT_CS_PORT_RST
, 10, 100);
1271 if (tmp
& PORT_CS_PORT_RST
)
1272 dev_printk(KERN_ERR
, host
->dev
,
1273 "failed to clear port RST\n");
1276 /* configure port */
1277 sil24_config_port(ap
);
1280 /* Turn on interrupts */
1281 writel(IRQ_STAT_4PORTS
, host_base
+ HOST_CTRL
);
1284 static int sil24_init_one(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
1286 static int printed_version
= 0;
1287 struct ata_port_info pi
= sil24_port_info
[ent
->driver_data
];
1288 const struct ata_port_info
*ppi
[] = { &pi
, NULL
};
1289 void __iomem
* const *iomap
;
1290 struct ata_host
*host
;
1294 if (!printed_version
++)
1295 dev_printk(KERN_DEBUG
, &pdev
->dev
, "version " DRV_VERSION
"\n");
1297 /* acquire resources */
1298 rc
= pcim_enable_device(pdev
);
1302 rc
= pcim_iomap_regions(pdev
,
1303 (1 << SIL24_HOST_BAR
) | (1 << SIL24_PORT_BAR
),
1307 iomap
= pcim_iomap_table(pdev
);
1309 /* apply workaround for completion IRQ loss on PCI-X errata */
1310 if (pi
.flags
& SIL24_FLAG_PCIX_IRQ_WOC
) {
1311 tmp
= readl(iomap
[SIL24_HOST_BAR
] + HOST_CTRL
);
1312 if (tmp
& (HOST_CTRL_TRDY
| HOST_CTRL_STOP
| HOST_CTRL_DEVSEL
))
1313 dev_printk(KERN_INFO
, &pdev
->dev
,
1314 "Applying completion IRQ loss on PCI-X "
1317 pi
.flags
&= ~SIL24_FLAG_PCIX_IRQ_WOC
;
1320 /* allocate and fill host */
1321 host
= ata_host_alloc_pinfo(&pdev
->dev
, ppi
,
1322 SIL24_FLAG2NPORTS(ppi
[0]->flags
));
1325 host
->iomap
= iomap
;
1327 for (i
= 0; i
< host
->n_ports
; i
++) {
1328 struct ata_port
*ap
= host
->ports
[i
];
1329 size_t offset
= ap
->port_no
* PORT_REGS_SIZE
;
1330 void __iomem
*port
= iomap
[SIL24_PORT_BAR
] + offset
;
1332 host
->ports
[i
]->ioaddr
.cmd_addr
= port
;
1333 host
->ports
[i
]->ioaddr
.scr_addr
= port
+ PORT_SCONTROL
;
1335 ata_port_pbar_desc(ap
, SIL24_HOST_BAR
, -1, "host");
1336 ata_port_pbar_desc(ap
, SIL24_PORT_BAR
, offset
, "port");
1339 /* configure and activate the device */
1340 if (!pci_set_dma_mask(pdev
, DMA_64BIT_MASK
)) {
1341 rc
= pci_set_consistent_dma_mask(pdev
, DMA_64BIT_MASK
);
1343 rc
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
1345 dev_printk(KERN_ERR
, &pdev
->dev
,
1346 "64-bit DMA enable failed\n");
1351 rc
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
1353 dev_printk(KERN_ERR
, &pdev
->dev
,
1354 "32-bit DMA enable failed\n");
1357 rc
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
1359 dev_printk(KERN_ERR
, &pdev
->dev
,
1360 "32-bit consistent DMA enable failed\n");
1365 sil24_init_controller(host
);
1367 pci_set_master(pdev
);
1368 return ata_host_activate(host
, pdev
->irq
, sil24_interrupt
, IRQF_SHARED
,
1373 static int sil24_pci_device_resume(struct pci_dev
*pdev
)
1375 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
1376 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1379 rc
= ata_pci_device_do_resume(pdev
);
1383 if (pdev
->dev
.power
.power_state
.event
== PM_EVENT_SUSPEND
)
1384 writel(HOST_CTRL_GLOBAL_RST
, host_base
+ HOST_CTRL
);
1386 sil24_init_controller(host
);
1388 ata_host_resume(host
);
1393 static int sil24_port_resume(struct ata_port
*ap
)
1395 sil24_config_pmp(ap
, ap
->nr_pmp_links
);
1400 static int __init
sil24_init(void)
1402 return pci_register_driver(&sil24_pci_driver
);
1405 static void __exit
sil24_exit(void)
1407 pci_unregister_driver(&sil24_pci_driver
);
1410 MODULE_AUTHOR("Tejun Heo");
1411 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1412 MODULE_LICENSE("GPL");
1413 MODULE_DEVICE_TABLE(pci
, sil24_pci_tbl
);
1415 module_init(sil24_init
);
1416 module_exit(sil24_exit
);